/* * The contents of this file are subject to the Mozilla Public * License Version 1.1 (the "License"); you may not use this file * except in compliance with the License. You may obtain a copy of * the License at http://www.mozilla.org/MPL/ * * Software distributed under the License is distributed on an "AS * IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or * implied. See the License for the specific language governing * rights and limitations under the License. * * The Original Code is the Netscape security libraries. * * The Initial Developer of the Original Code is Netscape * Communications Corporation. Portions created by Netscape are * Copyright (C) 1994-2000 Netscape Communications Corporation. All * Rights Reserved. * * Contributor(s): * * Alternatively, the contents of this file may be used under the * terms of the GNU General Public License Version 2 or later (the * "GPL"), in which case the provisions of the GPL are applicable * instead of those above. If you wish to allow use of your * version of this file only under the terms of the GPL and not to * allow others to use your version of this file under the MPL, * indicate your decision by deleting the provisions above and * replace them with the notice and other provisions required by * the GPL. If you do not delete the provisions above, a recipient * may use your version of this file under either the MPL or the * GPL. */ /* * Support routines for CMS implementation, none of which are exported. * * Do not export this file! If something in here is really needed outside * of smime code, first try to add a CMS interface which will do it for * you. If that has a problem, then just move out what you need, changing * its name as appropriate! * * $Id: cmslocal.h,v 1.2 2000-06-13 21:56:29 chrisk%netscape.com Exp $ */ #ifndef _CMSLOCAL_H_ #define _CMSLOCAL_H_ #include "cms.h" #include "cmsreclist.h" #include "secasn1t.h" extern const SEC_ASN1Template NSSCMSContentInfoTemplate[]; /************************************************************************/ SEC_BEGIN_PROTOS /*********************************************************************** * cmscipher.c - en/decryption routines ***********************************************************************/ /* * NSS_CMSCipherContext_StartDecrypt - create a cipher context to do decryption * based on the given bulk * encryption key and algorithm identifier (which may include an iv). */ extern NSSCMSCipherContext * NSS_CMSCipherContext_StartDecrypt(PK11SymKey *key, SECAlgorithmID *algid); /* * NSS_CMSCipherContext_StartEncrypt - create a cipher object to do encryption, * based on the given bulk encryption key and algorithm tag. Fill in the algorithm * identifier (which may include an iv) appropriately. */ extern NSSCMSCipherContext * NSS_CMSCipherContext_StartEncrypt(PRArenaPool *poolp, PK11SymKey *key, SECAlgorithmID *algid); extern void NSS_CMSCipherContext_Destroy(NSSCMSCipherContext *cc); /* * NSS_CMSCipherContext_DecryptLength - find the output length of the next call to decrypt. * * cc - the cipher context * input_len - number of bytes used as input * final - true if this is the final chunk of data * * Result can be used to perform memory allocations. Note that the amount * is exactly accurate only when not doing a block cipher or when final * is false, otherwise it is an upper bound on the amount because until * we see the data we do not know how many padding bytes there are * (always between 1 and bsize). */ extern unsigned int NSS_CMSCipherContext_DecryptLength(NSSCMSCipherContext *cc, unsigned int input_len, PRBool final); /* * NSS_CMSCipherContext_EncryptLength - find the output length of the next call to encrypt. * * cc - the cipher context * input_len - number of bytes used as input * final - true if this is the final chunk of data * * Result can be used to perform memory allocations. */ extern unsigned int NSS_CMSCipherContext_EncryptLength(NSSCMSCipherContext *cc, unsigned int input_len, PRBool final); /* * NSS_CMSCipherContext_Decrypt - do the decryption * * cc - the cipher context * output - buffer for decrypted result bytes * output_len_p - number of bytes in output * max_output_len - upper bound on bytes to put into output * input - pointer to input bytes * input_len - number of input bytes * final - true if this is the final chunk of data * * Decrypts a given length of input buffer (starting at "input" and * containing "input_len" bytes), placing the decrypted bytes in * "output" and storing the output length in "*output_len_p". * "cc" is the return value from NSS_CMSCipher_StartDecrypt. * When "final" is true, this is the last of the data to be decrypted. */ extern SECStatus NSS_CMSCipherContext_Decrypt(NSSCMSCipherContext *cc, unsigned char *output, unsigned int *output_len_p, unsigned int max_output_len, const unsigned char *input, unsigned int input_len, PRBool final); /* * NSS_CMSCipherContext_Encrypt - do the encryption * * cc - the cipher context * output - buffer for decrypted result bytes * output_len_p - number of bytes in output * max_output_len - upper bound on bytes to put into output * input - pointer to input bytes * input_len - number of input bytes * final - true if this is the final chunk of data * * Encrypts a given length of input buffer (starting at "input" and * containing "input_len" bytes), placing the encrypted bytes in * "output" and storing the output length in "*output_len_p". * "cc" is the return value from NSS_CMSCipher_StartEncrypt. * When "final" is true, this is the last of the data to be encrypted. */ extern SECStatus NSS_CMSCipherContext_Encrypt(NSSCMSCipherContext *cc, unsigned char *output, unsigned int *output_len_p, unsigned int max_output_len, const unsigned char *input, unsigned int input_len, PRBool final); /************************************************************************ * cmspubkey.c - public key operations ************************************************************************/ /* * NSS_CMSUtil_EncryptSymKey_RSA - wrap a symmetric key with RSA * * this function takes a symmetric key and encrypts it using an RSA public key * according to PKCS#1 and RFC2633 (S/MIME) */ extern SECStatus NSS_CMSUtil_EncryptSymKey_RSA(PLArenaPool *poolp, CERTCertificate *cert, PK11SymKey *key, SECItem *encKey); /* * NSS_CMSUtil_DecryptSymKey_RSA - unwrap a RSA-wrapped symmetric key * * this function takes an RSA-wrapped symmetric key and unwraps it, returning a symmetric * key handle. Please note that the actual unwrapped key data may not be allowed to leave * a hardware token... */ extern PK11SymKey * NSS_CMSUtil_DecryptSymKey_RSA(SECKEYPrivateKey *privkey, SECItem *encKey, SECOidTag bulkalgtag); extern SECStatus NSS_CMSUtil_EncryptSymKey_MISSI(PLArenaPool *poolp, CERTCertificate *cert, PK11SymKey *key, SECOidTag symalgtag, SECItem *encKey, SECItem **pparams, void *pwfn_arg); extern PK11SymKey * NSS_CMSUtil_DecryptSymKey_MISSI(SECKEYPrivateKey *privkey, SECItem *encKey, SECAlgorithmID *keyEncAlg, SECOidTag bulkalgtag, void *pwfn_arg); extern SECStatus NSS_CMSUtil_EncryptSymKey_ESDH(PLArenaPool *poolp, CERTCertificate *cert, PK11SymKey *key, SECItem *encKey, SECItem **ukm, SECAlgorithmID *keyEncAlg, SECItem *originatorPubKey); extern PK11SymKey * NSS_CMSUtil_DecryptSymKey_ESDH(SECKEYPrivateKey *privkey, SECItem *encKey, SECAlgorithmID *keyEncAlg, SECOidTag bulkalgtag, void *pwfn_arg); /************************************************************************ * cmsreclist.c - recipient list stuff ************************************************************************/ extern NSSCMSRecipient **nss_cms_recipient_list_create(NSSCMSRecipientInfo **recipientinfos); extern void nss_cms_recipient_list_destroy(NSSCMSRecipient **recipient_list); extern NSSCMSRecipientEncryptedKey *NSS_CMSRecipientEncryptedKey_Create(PLArenaPool *poolp); /************************************************************************ * cmsarray.c - misc array functions ************************************************************************/ /* * NSS_CMSArray_Alloc - allocate an array in an arena */ extern void ** NSS_CMSArray_Alloc(PRArenaPool *poolp, int n); /* * NSS_CMSArray_Add - add an element to the end of an array */ extern SECStatus NSS_CMSArray_Add(PRArenaPool *poolp, void ***array, void *obj); /* * NSS_CMSArray_IsEmpty - check if array is empty */ extern PRBool NSS_CMSArray_IsEmpty(void **array); /* * NSS_CMSArray_Count - count number of elements in array */ extern int NSS_CMSArray_Count(void **array); /* * NSS_CMSArray_Sort - sort an array ascending, in place * * If "secondary" is not NULL, the same reordering gets applied to it. * If "tertiary" is not NULL, the same reordering gets applied to it. * "compare" is a function that returns * < 0 when the first element is less than the second * = 0 when the first element is equal to the second * > 0 when the first element is greater than the second */ extern void NSS_CMSArray_Sort(void **primary, int (*compare)(void *,void *), void **secondary, void **tertiary); /************************************************************************ * cmsattr.c - misc attribute functions ************************************************************************/ /* * NSS_CMSAttribute_Create - create an attribute * * if value is NULL, the attribute won't have a value. It can be added later * with NSS_CMSAttribute_AddValue. */ extern NSSCMSAttribute * NSS_CMSAttribute_Create(PRArenaPool *poolp, SECOidTag oidtag, SECItem *value, PRBool encoded); /* * NSS_CMSAttribute_AddValue - add another value to an attribute */ extern SECStatus NSS_CMSAttribute_AddValue(PLArenaPool *poolp, NSSCMSAttribute *attr, SECItem *value); /* * NSS_CMSAttribute_GetType - return the OID tag */ extern SECOidTag NSS_CMSAttribute_GetType(NSSCMSAttribute *attr); /* * NSS_CMSAttribute_GetValue - return the first attribute value * * We do some sanity checking first: * - Multiple values are *not* expected. * - Empty values are *not* expected. */ extern SECItem * NSS_CMSAttribute_GetValue(NSSCMSAttribute *attr); /* * NSS_CMSAttribute_CompareValue - compare the attribute's first value against data */ extern PRBool NSS_CMSAttribute_CompareValue(NSSCMSAttribute *attr, SECItem *av); /* * NSS_CMSAttributeArray_Encode - encode an Attribute array as SET OF Attributes * * If you are wondering why this routine does not reorder the attributes * first, and might be tempted to make it do so, see the comment by the * call to ReorderAttributes in cmsencode.c. (Or, see who else calls this * and think long and hard about the implications of making it always * do the reordering.) */ extern SECItem * NSS_CMSAttributeArray_Encode(PRArenaPool *poolp, NSSCMSAttribute ***attrs, SECItem *dest); /* * NSS_CMSAttributeArray_Reorder - sort attribute array by attribute's DER encoding * * make sure that the order of the attributes guarantees valid DER (which must be * in lexigraphically ascending order for a SET OF); if reordering is necessary it * will be done in place (in attrs). */ extern SECStatus NSS_CMSAttributeArray_Reorder(NSSCMSAttribute **attrs); /* * NSS_CMSAttributeArray_FindAttrByOidTag - look through a set of attributes and * find one that matches the specified object ID. * * If "only" is true, then make sure that there is not more than one attribute * of the same type. Otherwise, just return the first one found. (XXX Does * anybody really want that first-found behavior? It was like that when I found it...) */ extern NSSCMSAttribute * NSS_CMSAttributeArray_FindAttrByOidTag(NSSCMSAttribute **attrs, SECOidTag oidtag, PRBool only); /* * NSS_CMSAttributeArray_AddAttr - add an attribute to an * array of attributes. */ extern SECStatus NSS_CMSAttributeArray_AddAttr(PLArenaPool *poolp, NSSCMSAttribute ***attrs, NSSCMSAttribute *attr); /* * NSS_CMSAttributeArray_SetAttr - set an attribute's value in a set of attributes */ extern SECStatus NSS_CMSAttributeArray_SetAttr(PLArenaPool *poolp, NSSCMSAttribute ***attrs, SECOidTag type, SECItem *value, PRBool encoded); /************************************************************************/ SEC_END_PROTOS #endif /* _CMSLOCAL_H_ */