pjs/layout/generic/nsBlockReflowState.h

273 строки
8.4 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
*
* The contents of this file are subject to the Netscape Public
* License Version 1.1 (the "License"); you may not use this file
* except in compliance with the License. You may obtain a copy of
* the License at http://www.mozilla.org/NPL/
*
* Software distributed under the License is distributed on an "AS
* IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
* implied. See the License for the specific language governing
* rights and limitations under the License.
*
* The Original Code is Mozilla Communicator client code.
*
* The Initial Developer of the Original Code is Netscape Communications
* Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All
* Rights Reserved.
*
* Contributor(s):
* Steve Clark <buster@netscape.com>
* Robert O'Callahan <roc+moz@cs.cmu.edu>
* L. David Baron <dbaron@fas.harvard.edu>
*/
#ifndef nsBlockReflowState_h__
#define nsBlockReflowState_h__
#include "nsBlockBandData.h"
#include "nsLineBox.h"
class nsBlockFrame;
class nsBlockReflowState {
public:
nsBlockReflowState(const nsHTMLReflowState& aReflowState,
nsIPresContext* aPresContext,
nsBlockFrame* aFrame,
const nsHTMLReflowMetrics& aMetrics,
PRBool aBlockMarginRoot);
~nsBlockReflowState();
/**
* Update our state when aLine is skipped over during incremental
* reflow.
*/
void RecoverStateFrom(nsLineBox* aLine, PRBool aPrevLineWasClean);
/**
* Get the available reflow space for the current y coordinate. The
* available space is relative to our coordinate system (0,0) is our
* upper left corner.
*/
void GetAvailableSpace() {
GetAvailableSpace(mY);
}
void GetAvailableSpace(nscoord aY);
void InitFloater(nsLineLayout& aLineLayout,
nsPlaceholderFrame* aPlaceholderFrame);
void AddFloater(nsLineLayout& aLineLayout,
nsPlaceholderFrame* aPlaceholderFrame,
PRBool aInitialReflow);
PRBool CanPlaceFloater(const nsRect& aFloaterRect, PRUint8 aFloats);
void FlowAndPlaceFloater(nsFloaterCache* aFloaterCache,
PRBool* aIsLeftFloater);
void PlaceBelowCurrentLineFloaters(nsFloaterCacheList& aFloaters);
void ClearFloaters(nscoord aY, PRUint8 aBreakType);
PRBool ClearPastFloaters(PRUint8 aBreakType);
PRBool IsAdjacentWithTop() const {
return mY == mReflowState.mComputedBorderPadding.top;
}
const nsMargin& BorderPadding() const {
return mReflowState.mComputedBorderPadding;
}
const nsMargin& Margin() const {
return mReflowState.mComputedMargin;
}
void UpdateMaxElementSize(const nsSize& aMaxElementSize);
void UpdateMaximumWidth(nscoord aMaximumWidth);
void RecoverVerticalMargins(nsLineBox* aLine,
PRBool aApplyTopMargin,
nscoord* aTopMarginResult,
nscoord* aBottomMarginResult);
void ComputeBlockAvailSpace(nsIFrame* aFrame,
nsSplittableType aSplitType,
const nsStyleDisplay* aDisplay,
nsRect& aResult);
void RecoverStateFrom(nsLineBox* aLine,
PRBool aApplyTopMargin,
nsRect* aDamageRect);
void AdvanceToNextLine() {
mLineNumber++;
}
PRBool IsImpactedByFloater() const;
nsLineBox* NewLineBox(nsIFrame* aFrame, PRInt32 aCount, PRBool aIsBlock);
void FreeLineBox(nsLineBox* aLine);
void StoreMaxElementSize(nsIFrame* aFloater, const nsSize& aSize) {
mBand.StoreMaxElementSize(mPresContext, aFloater, aSize);
}
//----------------------------------------
// This state is the "global" state computed once for the reflow of
// the block.
// The block frame that is using this object
nsBlockFrame* mBlock;
nsIPresContext* mPresContext;
const nsHTMLReflowState& mReflowState;
nsISpaceManager* mSpaceManager;
// The coordinates within the spacemanager where the block is being
// placed <b>after</b> taking into account the blocks border and
// padding. This, therefore, represents the inner "content area" (in
// spacemanager coordinates) where child frames will be placed,
// including child blocks and floaters.
nscoord mSpaceManagerX, mSpaceManagerY;
// XXX get rid of this
nsReflowStatus mReflowStatus;
nscoord mBottomEdge;
// The content area to reflow child frames within. The x/y
// coordinates are known to be mBorderPadding.left and
// mBorderPadding.top. The width/height may be NS_UNCONSTRAINEDSIZE
// if the container reflowing this frame has given the frame an
// unconstrained area.
nsSize mContentArea;
//----------------------------------------
// This state is "running" state updated by the reflow of each line
// in the block. This same state is "recovered" when a line is not
// dirty and is passed over during incremental reflow.
// The current line being reflowed
nsLineBox* mCurrentLine;
// The previous line just reflowed
nsLineBox* mPrevLine;
// The current Y coordinate in the block
nscoord mY;
// The available space within the current band.
nsRect mAvailSpaceRect;
// The maximum x-most of each line
nscoord mKidXMost;
// The combined area of all floaters placed so far
nsRect mFloaterCombinedArea;
// The y-coordinate of the last floater placed. We keep this around
// to enforce 9.5.1 rule [2]
nscoord mLastFloaterY;
// For unconstained-width reflow, we keep the right floaters
// combined area stored seperately.
PRBool mHaveRightFloaters;
nsRect mRightFloaterCombinedArea;
nsFloaterCacheFreeList mFloaterCacheFreeList;
// Previous child. This is used when pulling up a frame to update
// the sibling list.
nsIFrame* mPrevChild;
// The next immediate child frame that is the target of an
// incremental reflow command. Once that child has been reflowed we
// null this slot out.
nsIFrame* mNextRCFrame;
// The previous child frames collapsed bottom margin value.
nscoord mPrevBottomMargin;
// The current next-in-flow for the block. When lines are pulled
// from a next-in-flow, this is used to know which next-in-flow to
// pull from. When a next-in-flow is emptied of lines, we advance
// this to the next next-in-flow.
nsBlockFrame* mNextInFlow;
// The current band data for the current Y coordinate
nsBlockBandData mBand;
//----------------------------------------
// Temporary line-reflow state. This state is used during the reflow
// of a given line, but doesn't have meaning before or after.
// The list of floaters that are "current-line" floaters. These are
// added to the line after the line has been reflowed, to keep the
// list fiddling from being N^2.
nsFloaterCacheFreeList mCurrentLineFloaters;
// The list of floaters which are "below current-line"
// floaters. These are reflowed/placed after the line is reflowed
// and placed. Again, this is done to keep the list fiddling from
// being N^2.
nsFloaterCacheFreeList mBelowCurrentLineFloaters;
nsSize mMaxElementSize;
nscoord mMaximumWidth;
nscoord mMinLineHeight;
PRInt32 mLineNumber;
// block reflow state flags
#define BRS_UNCONSTRAINEDWIDTH 0x00000001
#define BRS_UNCONSTRAINEDHEIGHT 0x00000002
#define BRS_SHRINKWRAPWIDTH 0x00000004
#define BRS_NEEDRESIZEREFLOW 0x00000008
#define BRS_ISINLINEINCRREFLOW 0x00000010
#define BRS_NOWRAP 0x00000020
#define BRS_ISTOPMARGINROOT 0x00000040 // Is this frame a root for top/bottom margin collapsing?
#define BRS_ISBOTTOMMARGINROOT 0x00000080
#define BRS_APPLYTOPMARGIN 0x00000100 // See ShouldApplyTopMargin
#define BRS_COMPUTEMAXELEMENTSIZE 0x00000200
#define BRS_COMPUTEMAXWIDTH 0x00000400
#define BRS_LASTFLAG BRS_COMPUTEMAXWIDTH
PRInt16 mFlags;
void SetFlag(PRUint32 aFlag, PRBool aValue)
{
NS_ASSERTION(aFlag<=BRS_LASTFLAG, "bad flag");
NS_ASSERTION(aValue==PR_FALSE || aValue==PR_TRUE, "bad value");
if (aValue) { // set flag
mFlags |= aFlag;
}
else { // unset flag
mFlags &= ~aFlag;
}
}
PRBool GetFlag(PRUint32 aFlag) const
{
NS_ASSERTION(aFlag<=BRS_LASTFLAG, "bad flag");
PRBool result = (mFlags & aFlag);
if (result) return PR_TRUE;
return PR_FALSE;
}
};
#endif // nsBlockReflowState_h__