mozilla
/
pjs
зеркало из https://github.com/mozilla/pjs.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
pjs/extensions/gio/nsGIOProtocolHandler.cpp

1164 строки
36 KiB
C++
Исходник Ответственный История

/* vim:set ts=2 sw=2 et cindent: */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Mozilla gnome-vfs extension.
*
* The Initial Developer of the Original Code is IBM Corporation.
*
* Portions created by IBM Corporation are Copyright (C) 2004
* IBM Corporation. All Rights Reserved.
*
* Contributor(s):
* Darin Fisher <darin@meer.net>
* Jan Horak <jhorak@redhat.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/*
* This code is based on original Mozilla gnome-vfs extension. It implements
* input stream provided by GVFS/GIO.
*/
#include "mozilla/ModuleUtils.h"
#include "nsIPrefService.h"
#include "nsIPrefBranch.h"
#include "nsIObserver.h"
#include "nsThreadUtils.h"
#include "nsProxyRelease.h"
#include "nsIStringBundle.h"
#include "nsIStandardURL.h"
#include "nsMimeTypes.h"
#include "nsNetUtil.h"
#include "mozilla/Monitor.h"
#include <gio/gio.h>
#define MOZ_GIO_SCHEME "moz-gio"
#define MOZ_GIO_SUPPORTED_PROTOCOLS "network.gio.supported-protocols"
//-----------------------------------------------------------------------------
// NSPR_LOG_MODULES=gio:5
#ifdef PR_LOGGING
static PRLogModuleInfo *sGIOLog;
#define LOG(args) PR_LOG(sGIOLog, PR_LOG_DEBUG, args)
#else
#define LOG(args)
#endif
//-----------------------------------------------------------------------------
static nsresult
MapGIOResult(gint code)
{
switch (code)
{
case G_IO_ERROR_NOT_FOUND: return NS_ERROR_FILE_NOT_FOUND; // shows error
case G_IO_ERROR_INVALID_ARGUMENT: return NS_ERROR_INVALID_ARG;
case G_IO_ERROR_NOT_SUPPORTED: return NS_ERROR_NOT_AVAILABLE;
case G_IO_ERROR_NO_SPACE: return NS_ERROR_FILE_NO_DEVICE_SPACE;
case G_IO_ERROR_READ_ONLY: return NS_ERROR_FILE_READ_ONLY;
case G_IO_ERROR_PERMISSION_DENIED: return NS_ERROR_FILE_ACCESS_DENIED; // wrong password/login
case G_IO_ERROR_CLOSED: return NS_BASE_STREAM_CLOSED; // was EOF
case G_IO_ERROR_NOT_DIRECTORY: return NS_ERROR_FILE_NOT_DIRECTORY;
case G_IO_ERROR_PENDING: return NS_ERROR_IN_PROGRESS;
case G_IO_ERROR_EXISTS: return NS_ERROR_FILE_ALREADY_EXISTS;
case G_IO_ERROR_IS_DIRECTORY: return NS_ERROR_FILE_IS_DIRECTORY;
case G_IO_ERROR_NOT_MOUNTED: return NS_ERROR_NOT_CONNECTED; // shows error
case G_IO_ERROR_HOST_NOT_FOUND: return NS_ERROR_UNKNOWN_HOST; // shows error
case G_IO_ERROR_CANCELLED: return NS_ERROR_ABORT;
case G_IO_ERROR_NOT_EMPTY: return NS_ERROR_FILE_DIR_NOT_EMPTY;
case G_IO_ERROR_FILENAME_TOO_LONG: return NS_ERROR_FILE_NAME_TOO_LONG;
case G_IO_ERROR_INVALID_FILENAME: return NS_ERROR_FILE_INVALID_PATH;
case G_IO_ERROR_TIMED_OUT: return NS_ERROR_NET_TIMEOUT; // shows error
case G_IO_ERROR_WOULD_BLOCK: return NS_BASE_STREAM_WOULD_BLOCK;
case G_IO_ERROR_FAILED_HANDLED: return NS_ERROR_ABORT; // Cancel on login dialog
/* unhandled:
G_IO_ERROR_NOT_REGULAR_FILE,
G_IO_ERROR_NOT_SYMBOLIC_LINK,
G_IO_ERROR_NOT_MOUNTABLE_FILE,
G_IO_ERROR_TOO_MANY_LINKS,
G_IO_ERROR_ALREADY_MOUNTED,
G_IO_ERROR_CANT_CREATE_BACKUP,
G_IO_ERROR_WRONG_ETAG,
G_IO_ERROR_WOULD_RECURSE,
G_IO_ERROR_BUSY,
G_IO_ERROR_WOULD_MERGE,
G_IO_ERROR_TOO_MANY_OPEN_FILES
*/
// Make GCC happy
default:
return NS_ERROR_FAILURE;
}
return NS_ERROR_FAILURE;
}
static nsresult
MapGIOResult(GError *result)
{
if (!result)
return NS_OK;
else
return MapGIOResult(result->code);
}
/** Return values for mount operation.
* These enums are used as mount operation return values.
*/
typedef enum {
MOUNT_OPERATION_IN_PROGRESS, /** \enum operation in progress */
MOUNT_OPERATION_SUCCESS, /** \enum operation successful */
MOUNT_OPERATION_FAILED /** \enum operation not successful */
} MountOperationResult;
//-----------------------------------------------------------------------------
/**
* Sort function compares according to file type (directory/file)
* and alphabethical order
* @param a pointer to GFileInfo object to compare
* @param b pointer to GFileInfo object to compare
* @return -1 when first object should be before the second, 0 when equal,
* +1 when second object should be before the first
*/
static gint
FileInfoComparator(gconstpointer a, gconstpointer b)
{
GFileInfo *ia = ( GFileInfo *) a;
GFileInfo *ib = ( GFileInfo *) b;
if (g_file_info_get_file_type(ia) == G_FILE_TYPE_DIRECTORY
&& g_file_info_get_file_type(ib) != G_FILE_TYPE_DIRECTORY)
return -1;
if (g_file_info_get_file_type(ib) == G_FILE_TYPE_DIRECTORY
&& g_file_info_get_file_type(ia) != G_FILE_TYPE_DIRECTORY)
return 1;
return strcasecmp(g_file_info_get_name(ia), g_file_info_get_name(ib));
}
/* Declaration of mount callback functions */
static void mount_enclosing_volume_finished (GObject *source_object,
GAsyncResult *res,
gpointer user_data);
static void mount_operation_ask_password (GMountOperation *mount_op,
const char *message,
const char *default_user,
const char *default_domain,
GAskPasswordFlags flags,
gpointer user_data);
//-----------------------------------------------------------------------------
class nsGIOInputStream : public nsIInputStream
{
public:
NS_DECL_ISUPPORTS
NS_DECL_NSIINPUTSTREAM
nsGIOInputStream(const nsCString &uriSpec)
: mSpec(uriSpec)
, mChannel(nsnull)
, mHandle(nsnull)
, mStream(nsnull)
, mBytesRemaining(PR_UINT32_MAX)
, mStatus(NS_OK)
, mDirList(nsnull)
, mDirListPtr(nsnull)
, mDirBufCursor(0)
, mDirOpen(false)
, mMonitorMountInProgress("GIOInputStream::MountFinished") { }
~nsGIOInputStream() { Close(); }
void SetChannel(nsIChannel *channel)
{
// We need to hold an owning reference to our channel. This is done
// so we can access the channel's notification callbacks to acquire
// a reference to a nsIAuthPrompt if we need to handle an interactive
// mount operation.
//
// However, the channel can only be accessed on the main thread, so
// we have to be very careful with ownership. Moreover, it doesn't
// support threadsafe addref/release, so proxying is the answer.
//
// Also, it's important to note that this likely creates a reference
// cycle since the channel likely owns this stream. This reference
// cycle is broken in our Close method.
NS_ADDREF(mChannel = channel);
}
void SetMountResult(MountOperationResult result, gint error_code);
private:
nsresult DoOpen();
nsresult DoRead(char *aBuf, PRUint32 aCount, PRUint32 *aCountRead);
nsresult SetContentTypeOfChannel(const char *contentType);
nsresult MountVolume();
nsresult DoOpenDirectory();
nsresult DoOpenFile(GFileInfo *info);
nsCString mSpec;
nsIChannel *mChannel; // manually refcounted
GFile *mHandle;
GFileInputStream *mStream;
PRUint64 mBytesRemaining;
nsresult mStatus;
GList *mDirList;
GList *mDirListPtr;
nsCString mDirBuf;
PRUint32 mDirBufCursor;
bool mDirOpen;
MountOperationResult mMountRes;
mozilla::Monitor mMonitorMountInProgress;
gint mMountErrorCode;
};
/**
* Set result of mount operation and notify monitor waiting for results.
* This method is called in main thread as long as it is used only
* in mount_enclosing_volume_finished function.
* @param result Result of mount operation
*/
void
nsGIOInputStream::SetMountResult(MountOperationResult result, gint error_code)
{
mozilla::MonitorAutoLock mon(mMonitorMountInProgress);
mMountRes = result;
mMountErrorCode = error_code;
mon.Notify();
}
/**
* Start mount operation and wait in loop until it is finished. This method is
* called from thread which is trying to read from location.
*/
nsresult
nsGIOInputStream::MountVolume() {
GMountOperation* mount_op = g_mount_operation_new();
g_signal_connect (mount_op, "ask-password",
G_CALLBACK (mount_operation_ask_password), mChannel);
mMountRes = MOUNT_OPERATION_IN_PROGRESS;
/* g_file_mount_enclosing_volume uses a dbus request to mount the volume.
Callback mount_enclosing_volume_finished is called in main thread
(not this thread on which this method is called). */
g_file_mount_enclosing_volume(mHandle,
G_MOUNT_MOUNT_NONE,
mount_op,
NULL,
mount_enclosing_volume_finished,
this);
mozilla::MonitorAutoLock mon(mMonitorMountInProgress);
/* Waiting for finish of mount operation thread */
while (mMountRes == MOUNT_OPERATION_IN_PROGRESS)
mon.Wait();
g_object_unref(mount_op);
if (mMountRes == MOUNT_OPERATION_FAILED) {
return MapGIOResult(mMountErrorCode);
} else {
return NS_OK;
}
}
/**
* Create list of infos about objects in opened directory
* Return: NS_OK when list obtained, otherwise error code according
* to failed operation.
*/
nsresult
nsGIOInputStream::DoOpenDirectory()
{
GError *error = NULL;
GFileEnumerator *f_enum = g_file_enumerate_children(mHandle,
"standard::*,time::*",
G_FILE_QUERY_INFO_NONE,
NULL,
&error);
if (!f_enum) {
nsresult rv = MapGIOResult(error);
g_warning("Cannot read from directory: %s", error->message);
g_error_free(error);
return rv;
}
// fill list of file infos
GFileInfo *info = g_file_enumerator_next_file(f_enum, NULL, &error);
while (info) {
mDirList = g_list_append(mDirList, info);
info = g_file_enumerator_next_file(f_enum, NULL, &error);
}
g_object_unref(f_enum);
if (error) {
g_warning("Error reading directory content: %s", error->message);
nsresult rv = MapGIOResult(error);
g_error_free(error);
return rv;
}
mDirOpen = true;
// Sort list of file infos by using FileInfoComparator function
mDirList = g_list_sort(mDirList, FileInfoComparator);
mDirListPtr = mDirList;
// Write base URL (make sure it ends with a '/')
mDirBuf.Append("300: ");
mDirBuf.Append(mSpec);
if (mSpec.get()[mSpec.Length() - 1] != '/')
mDirBuf.Append('/');
mDirBuf.Append('\n');
// Write column names
mDirBuf.Append("200: filename content-length last-modified file-type\n");
// Write charset (assume UTF-8)
// XXX is this correct?
mDirBuf.Append("301: UTF-8\n");
SetContentTypeOfChannel(APPLICATION_HTTP_INDEX_FORMAT);
return NS_OK;
}
/**
* Create file stream and set mime type for channel
* @param info file info used to determine mime type
* @return NS_OK when file stream created successfuly, error code otherwise
*/
nsresult
nsGIOInputStream::DoOpenFile(GFileInfo *info)
{
GError *error = NULL;
mStream = g_file_read(mHandle, NULL, &error);
if (!mStream) {
nsresult rv = MapGIOResult(error);
g_warning("Cannot read from file: %s", error->message);
g_error_free(error);
return rv;
}
const char * content_type = g_file_info_get_content_type(info);
if (content_type) {
char *mime_type = g_content_type_get_mime_type(content_type);
if (mime_type) {
if (strcmp(mime_type, APPLICATION_OCTET_STREAM) != 0) {
SetContentTypeOfChannel(mime_type);
}
g_free(mime_type);
}
} else {
g_warning("Missing content type.");
}
mBytesRemaining = g_file_info_get_size(info);
// Update the content length attribute on the channel. We do this
// synchronously without proxying. This hack is not as bad as it looks!
mChannel->SetContentLength(mBytesRemaining);
return NS_OK;
}
/**
* Start file open operation, mount volume when needed and according to file type
* create file output stream or read directory content.
* @return NS_OK when file or directory opened successfully, error code otherwise
*/
nsresult
nsGIOInputStream::DoOpen()
{
nsresult rv;
GError *error = NULL;
NS_ASSERTION(mHandle == nsnull, "already open");
mHandle = g_file_new_for_uri( mSpec.get() );
GFileInfo *info = g_file_query_info(mHandle,
"standard::*",
G_FILE_QUERY_INFO_NONE,
NULL,
&error);
if (error) {
if (error->domain == G_IO_ERROR && error->code == G_IO_ERROR_NOT_MOUNTED) {
// location is not yet mounted, try to mount
g_error_free(error);
if (NS_IsMainThread())
return NS_ERROR_NOT_CONNECTED;
error = NULL;
rv = MountVolume();
if (rv != NS_OK) {
return rv;
}
// get info again
info = g_file_query_info(mHandle,
"standard::*",
G_FILE_QUERY_INFO_NONE,
NULL,
&error);
// second try to get file info from remote files after media mount
if (!info) {
g_warning("Unable to get file info: %s", error->message);
rv = MapGIOResult(error);
g_error_free(error);
return rv;
}
} else {
g_warning("Unable to get file info: %s", error->message);
rv = MapGIOResult(error);
g_error_free(error);
return rv;
}
}
// Get file type to handle directories and file differently
GFileType f_type = g_file_info_get_file_type(info);
if (f_type == G_FILE_TYPE_DIRECTORY) {
// directory
rv = DoOpenDirectory();
} else if (f_type != G_FILE_TYPE_UNKNOWN) {
// file
rv = DoOpenFile(info);
} else {
g_warning("Unable to get file type.");
rv = NS_ERROR_FILE_NOT_FOUND;
}
if (info)
g_object_unref(info);
return rv;
}
/**
* Read content of file or create file list from directory
* @param aBuf read destination buffer
* @param aCount length of destination buffer
* @param aCountRead number of read characters
* @return NS_OK when read successfully, NS_BASE_STREAM_CLOSED when end of file,
* error code otherwise
*/
nsresult
nsGIOInputStream::DoRead(char *aBuf, PRUint32 aCount, PRUint32 *aCountRead)
{
nsresult rv = NS_ERROR_NOT_AVAILABLE;
if (mStream) {
// file read
GError *error = NULL;
PRUint32 bytes_read = g_input_stream_read(G_INPUT_STREAM(mStream),
aBuf,
aCount,
NULL,
&error);
if (error) {
rv = MapGIOResult(error);
*aCountRead = 0;
g_warning("Cannot read from file: %s", error->message);
g_error_free(error);
return rv;
}
*aCountRead = bytes_read;
mBytesRemaining -= *aCountRead;
return NS_OK;
}
else if (mDirOpen) {
// directory read
while (aCount && rv != NS_BASE_STREAM_CLOSED)
{
// Copy data out of our buffer
PRUint32 bufLen = mDirBuf.Length() - mDirBufCursor;
if (bufLen)
{
PRUint32 n = NS_MIN(bufLen, aCount);
memcpy(aBuf, mDirBuf.get() + mDirBufCursor, n);
*aCountRead += n;
aBuf += n;
aCount -= n;
mDirBufCursor += n;
}
if (!mDirListPtr) // Are we at the end of the directory list?
{
rv = NS_BASE_STREAM_CLOSED;
}
else if (aCount) // Do we need more data?
{
GFileInfo *info = (GFileInfo *) mDirListPtr->data;
// Prune '.' and '..' from directory listing.
const char * fname = g_file_info_get_name(info);
if (fname && fname[0] == '.' &&
(fname[1] == '\0' || (fname[1] == '.' && fname[2] == '\0')))
{
mDirListPtr = mDirListPtr->next;
continue;
}
mDirBuf.Assign("201: ");
// The "filename" field
nsCString escName;
nsCOMPtr<nsINetUtil> nu = do_GetService(NS_NETUTIL_CONTRACTID);
if (nu && fname) {
nu->EscapeString(nsDependentCString(fname),
nsINetUtil::ESCAPE_URL_PATH, escName);
mDirBuf.Append(escName);
mDirBuf.Append(' ');
}
// The "content-length" field
// XXX truncates size from 64-bit to 32-bit
mDirBuf.AppendInt(PRInt32(g_file_info_get_size(info)));
mDirBuf.Append(' ');
// The "last-modified" field
//
// NSPR promises: PRTime is compatible with time_t
// we just need to convert from seconds to microseconds
GTimeVal gtime;
g_file_info_get_modification_time(info, &gtime);
PRExplodedTime tm;
PRTime pt = ((PRTime) gtime.tv_sec) * 1000000;
PR_ExplodeTime(pt, PR_GMTParameters, &tm);
{
char buf[64];
PR_FormatTimeUSEnglish(buf, sizeof(buf),
"%a,%%20%d%%20%b%%20%Y%%20%H:%M:%S%%20GMT ", &tm);
mDirBuf.Append(buf);
}
// The "file-type" field
switch (g_file_info_get_file_type(info))
{
case G_FILE_TYPE_REGULAR:
mDirBuf.Append("FILE ");
break;
case G_FILE_TYPE_DIRECTORY:
mDirBuf.Append("DIRECTORY ");
break;
case G_FILE_TYPE_SYMBOLIC_LINK:
mDirBuf.Append("SYMBOLIC-LINK ");
break;
default:
break;
}
mDirBuf.Append('\n');
mDirBufCursor = 0;
mDirListPtr = mDirListPtr->next;
}
}
}
return rv;
}
/**
* This class is used to implement SetContentTypeOfChannel.
*/
class nsGIOSetContentTypeEvent : public nsRunnable
{
public:
nsGIOSetContentTypeEvent(nsIChannel *channel, const char *contentType)
: mChannel(channel), mContentType(contentType)
{
// stash channel reference in mChannel. no AddRef here! see note
// in SetContentTypeOfchannel.
}
NS_IMETHOD Run()
{
mChannel->SetContentType(mContentType);
return NS_OK;
}
private:
nsIChannel *mChannel;
nsCString mContentType;
};
nsresult
nsGIOInputStream::SetContentTypeOfChannel(const char *contentType)
{
// We need to proxy this call over to the main thread. We post an
// asynchronous event in this case so that we don't delay reading data, and
// we know that this is safe to do since the channel's reference will be
// released asynchronously as well. We trust the ordering of the main
// thread's event queue to protect us against memory corruption.
nsresult rv;
nsCOMPtr<nsIRunnable> ev =
new nsGIOSetContentTypeEvent(mChannel, contentType);
if (!ev)
{
rv = NS_ERROR_OUT_OF_MEMORY;
}
else
{
rv = NS_DispatchToMainThread(ev);
}
return rv;
}
NS_IMPL_THREADSAFE_ISUPPORTS1(nsGIOInputStream, nsIInputStream)
/**
* Free all used memory and close stream.
*/
NS_IMETHODIMP
nsGIOInputStream::Close()
{
if (mStream)
{
g_object_unref(mStream);
mStream = nsnull;
}
if (mHandle)
{
g_object_unref(mHandle);
mHandle = nsnull;
}
if (mDirList)
{
// Destroy the list of GIOFileInfo objects...
g_list_foreach(mDirList, (GFunc) g_object_unref, nsnull);
g_list_free(mDirList);
mDirList = nsnull;
mDirListPtr = nsnull;
}
if (mChannel)
{
nsresult rv = NS_OK;
nsCOMPtr<nsIThread> thread = do_GetMainThread();
if (thread)
rv = NS_ProxyRelease(thread, mChannel);
NS_ASSERTION(thread && NS_SUCCEEDED(rv), "leaking channel reference");
mChannel = nsnull;
}
mSpec.Truncate(); // free memory
// Prevent future reads from re-opening the handle.
if (NS_SUCCEEDED(mStatus))
mStatus = NS_BASE_STREAM_CLOSED;
return NS_OK;
}
/**
* Return number of remaining bytes available on input
* @param aResult remaining bytes
*/
NS_IMETHODIMP
nsGIOInputStream::Available(PRUint32 *aResult)
{
if (NS_FAILED(mStatus))
return mStatus;
/* When remaining bytes are bigger than max PRUint32 value an aResult must
be set to PRUint32 maximum */
if (mBytesRemaining > PR_UINT32_MAX)
*aResult = PR_UINT32_MAX;
else
*aResult = mBytesRemaining;
return NS_OK;
}
/**
* Trying to read from stream. When location is not available it tries to mount it.
* @param aBuf buffer to put read data
* @param aCount length of aBuf
* @param aCountRead number of bytes actually read
*/
NS_IMETHODIMP
nsGIOInputStream::Read(char *aBuf,
PRUint32 aCount,
PRUint32 *aCountRead)
{
*aCountRead = 0;
// Check if file is already opened, otherwise open it
if (!mStream && !mDirOpen && mStatus == NS_OK) {
mStatus = DoOpen();
if (NS_FAILED(mStatus)) {
return mStatus;
}
}
mStatus = DoRead(aBuf, aCount, aCountRead);
// Check if all data has been read
if (mStatus == NS_BASE_STREAM_CLOSED)
return NS_OK;
// Check whenever any error appears while reading
return mStatus;
}
NS_IMETHODIMP
nsGIOInputStream::ReadSegments(nsWriteSegmentFun aWriter,
void *aClosure,
PRUint32 aCount,
PRUint32 *aResult)
{
// There is no way to implement this using GnomeVFS, but fortunately
// that doesn't matter. Because we are a blocking input stream, Necko
// isn't going to call our ReadSegments method.
NS_NOTREACHED("nsGIOInputStream::ReadSegments");
return NS_ERROR_NOT_IMPLEMENTED;
}
NS_IMETHODIMP
nsGIOInputStream::IsNonBlocking(bool *aResult)
{
*aResult = false;
return NS_OK;
}
//-----------------------------------------------------------------------------
/**
* Called when finishing mount operation. Result of operation is set in
* nsGIOInputStream. This function is called in main thread as an async request
* typically from dbus.
* @param source_object GFile object which requested the mount
* @param res result object
* @param user_data pointer to nsGIOInputStream
*/
static void
mount_enclosing_volume_finished (GObject *source_object,
GAsyncResult *res,
gpointer user_data)
{
GError *error = NULL;
nsGIOInputStream* istream = static_cast<nsGIOInputStream*>(user_data);
g_file_mount_enclosing_volume_finish(G_FILE (source_object), res, &error);
if (error) {
g_warning("Mount failed: %s %d", error->message, error->code);
istream->SetMountResult(MOUNT_OPERATION_FAILED, error->code);
g_error_free(error);
} else {
istream->SetMountResult(MOUNT_OPERATION_SUCCESS, 0);
}
}
/**
* This function is called when username or password are requested from user.
* This function is called in main thread as async request from dbus.
* @param mount_op mount operation
* @param message message to show to user
* @param default_user preffered user
* @param default_domain domain name
* @param flags what type of information is required
* @param user_data nsIChannel
*/
static void
mount_operation_ask_password (GMountOperation *mount_op,
const char *message,
const char *default_user,
const char *default_domain,
GAskPasswordFlags flags,
gpointer user_data)
{
nsIChannel *channel = (nsIChannel *) user_data;
if (!channel) {
g_mount_operation_reply(mount_op, G_MOUNT_OPERATION_ABORTED);
return;
}
// We can't handle request for domain
if (flags & G_ASK_PASSWORD_NEED_DOMAIN) {
g_mount_operation_reply(mount_op, G_MOUNT_OPERATION_ABORTED);
return;
}
nsCOMPtr<nsIAuthPrompt> prompt;
NS_QueryNotificationCallbacks(channel, prompt);
// If no auth prompt, then give up. We could failover to using the
// WindowWatcher service, but that might defeat a consumer's purposeful
// attempt to disable authentication (for whatever reason).
if (!prompt) {
g_mount_operation_reply(mount_op, G_MOUNT_OPERATION_ABORTED);
return;
}
// Parse out the host and port...
nsCOMPtr<nsIURI> uri;
channel->GetURI(getter_AddRefs(uri));
if (!uri) {
g_mount_operation_reply(mount_op, G_MOUNT_OPERATION_ABORTED);
return;
}
nsCAutoString scheme, hostPort;
uri->GetScheme(scheme);
uri->GetHostPort(hostPort);
// It doesn't make sense for either of these strings to be empty. What kind
// of funky URI is this?
if (scheme.IsEmpty() || hostPort.IsEmpty()) {
g_mount_operation_reply(mount_op, G_MOUNT_OPERATION_ABORTED);
return;
}
// Construct the single signon key. Altering the value of this key will
// cause people's remembered passwords to be forgotten. Think carefully
// before changing the way this key is constructed.
nsAutoString key, realm;
NS_ConvertUTF8toUTF16 dispHost(scheme);
dispHost.Append(NS_LITERAL_STRING("://"));
dispHost.Append(NS_ConvertUTF8toUTF16(hostPort));
key = dispHost;
if (*default_domain != '\0')
{
// We assume the realm string is ASCII. That might be a bogus assumption,
// but we have no idea what encoding GnomeVFS is using, so for now we'll
// limit ourselves to ISO-Latin-1. XXX What is a better solution?
realm.Append('"');
realm.Append(NS_ConvertASCIItoUTF16(default_domain));
realm.Append('"');
key.Append(' ');
key.Append(realm);
}
// Construct the message string...
//
// We use Necko's string bundle here. This code really should be encapsulated
// behind some Necko API, after all this code is based closely on the code in
// nsHttpChannel.cpp.
nsCOMPtr<nsIStringBundleService> bundleSvc =
do_GetService(NS_STRINGBUNDLE_CONTRACTID);
if (!bundleSvc) {
g_mount_operation_reply(mount_op, G_MOUNT_OPERATION_ABORTED);
return;
}
nsCOMPtr<nsIStringBundle> bundle;
bundleSvc->CreateBundle("chrome://global/locale/commonDialogs.properties",
getter_AddRefs(bundle));
if (!bundle) {
g_mount_operation_reply(mount_op, G_MOUNT_OPERATION_ABORTED);
return;
}
nsAutoString nsmessage;
if (flags & G_ASK_PASSWORD_NEED_PASSWORD) {
if (flags & G_ASK_PASSWORD_NEED_USERNAME) {
if (!realm.IsEmpty()) {
const PRUnichar *strings[] = { realm.get(), dispHost.get() };
bundle->FormatStringFromName(NS_LITERAL_STRING("EnterLoginForRealm").get(),
strings, 2, getter_Copies(nsmessage));
} else {
const PRUnichar *strings[] = { dispHost.get() };
bundle->FormatStringFromName(NS_LITERAL_STRING("EnterUserPasswordFor").get(),
strings, 1, getter_Copies(nsmessage));
}
} else {
NS_ConvertUTF8toUTF16 userName(default_user);
const PRUnichar *strings[] = { userName.get(), dispHost.get() };
bundle->FormatStringFromName(NS_LITERAL_STRING("EnterPasswordFor").get(),
strings, 2, getter_Copies(nsmessage));
}
} else {
g_warning("Unknown mount operation request (flags: %x)", flags);
}
if (nsmessage.IsEmpty()) {
g_mount_operation_reply(mount_op, G_MOUNT_OPERATION_ABORTED);
return;
}
// Prompt the user...
nsresult rv;
bool retval = false;
PRUnichar *user = nsnull, *pass = nsnull;
if (default_user) {
// user will be freed by PromptUsernameAndPassword
user = ToNewUnicode(NS_ConvertUTF8toUTF16(default_user));
}
if (flags & G_ASK_PASSWORD_NEED_USERNAME) {
rv = prompt->PromptUsernameAndPassword(nsnull, nsmessage.get(),
key.get(),
nsIAuthPrompt::SAVE_PASSWORD_PERMANENTLY,
&user, &pass, &retval);
} else {
rv = prompt->PromptPassword(nsnull, nsmessage.get(),
key.get(),
nsIAuthPrompt::SAVE_PASSWORD_PERMANENTLY,
&pass, &retval);
}
if (NS_FAILED(rv) || !retval) { // was || user == '\0' || pass == '\0'
g_mount_operation_reply(mount_op, G_MOUNT_OPERATION_ABORTED);
return;
}
/* GIO should accept UTF8 */
g_mount_operation_set_username(mount_op, NS_ConvertUTF16toUTF8(user).get());
g_mount_operation_set_password(mount_op, NS_ConvertUTF16toUTF8(pass).get());
nsMemory::Free(user);
nsMemory::Free(pass);
g_mount_operation_reply(mount_op, G_MOUNT_OPERATION_HANDLED);
}
//-----------------------------------------------------------------------------
class nsGIOProtocolHandler : public nsIProtocolHandler
, public nsIObserver
{
public:
NS_DECL_ISUPPORTS
NS_DECL_NSIPROTOCOLHANDLER
NS_DECL_NSIOBSERVER
nsresult Init();
private:
void InitSupportedProtocolsPref(nsIPrefBranch *prefs);
bool IsSupportedProtocol(const nsCString &spec);
nsCString mSupportedProtocols;
};
NS_IMPL_ISUPPORTS2(nsGIOProtocolHandler, nsIProtocolHandler, nsIObserver)
nsresult
nsGIOProtocolHandler::Init()
{
#ifdef PR_LOGGING
sGIOLog = PR_NewLogModule("gio");
#endif
nsCOMPtr<nsIPrefBranch> prefs = do_GetService(NS_PREFSERVICE_CONTRACTID);
if (prefs)
{
InitSupportedProtocolsPref(prefs);
prefs->AddObserver(MOZ_GIO_SUPPORTED_PROTOCOLS, this, false);
}
return NS_OK;
}
void
nsGIOProtocolHandler::InitSupportedProtocolsPref(nsIPrefBranch *prefs)
{
// Get user preferences to determine which protocol is supported.
// Gvfs/GIO has a set of supported protocols like obex, network, archive,
// computer, dav, cdda, gphoto2, trash, etc. Some of these seems to be
// irrelevant to process by browser. By default accept only smb and sftp
// protocols so far.
nsresult rv = prefs->GetCharPref(MOZ_GIO_SUPPORTED_PROTOCOLS,
getter_Copies(mSupportedProtocols));
if (NS_SUCCEEDED(rv)) {
mSupportedProtocols.StripWhitespace();
ToLowerCase(mSupportedProtocols);
}
else
mSupportedProtocols.Assign("smb:,sftp:"); // use defaults
LOG(("gio: supported protocols \"%s\"\n", mSupportedProtocols.get()));
}
bool
nsGIOProtocolHandler::IsSupportedProtocol(const nsCString &aSpec)
{
const char *specString = aSpec.get();
const char *colon = strchr(specString, ':');
if (!colon)
return false;
PRUint32 length = colon - specString + 1;
// <scheme> + ':'
nsCString scheme(specString, length);
char *found = PL_strcasestr(mSupportedProtocols.get(), scheme.get());
if (!found)
return false;
if (found[length] != ',' && found[length] != '\0')
return false;
return true;
}
NS_IMETHODIMP
nsGIOProtocolHandler::GetScheme(nsACString &aScheme)
{
aScheme.Assign(MOZ_GIO_SCHEME);
return NS_OK;
}
NS_IMETHODIMP
nsGIOProtocolHandler::GetDefaultPort(PRInt32 *aDefaultPort)
{
*aDefaultPort = -1;
return NS_OK;
}
NS_IMETHODIMP
nsGIOProtocolHandler::GetProtocolFlags(PRUint32 *aProtocolFlags)
{
// Is URI_STD true of all GnomeVFS URI types?
*aProtocolFlags = URI_STD | URI_DANGEROUS_TO_LOAD;
return NS_OK;
}
NS_IMETHODIMP
nsGIOProtocolHandler::NewURI(const nsACString &aSpec,
const char *aOriginCharset,
nsIURI *aBaseURI,
nsIURI **aResult)
{
const nsCString flatSpec(aSpec);
LOG(("gio: NewURI [spec=%s]\n", flatSpec.get()));
if (!aBaseURI)
{
// XXX Is it good to support all GIO protocols?
if (!IsSupportedProtocol(flatSpec))
return NS_ERROR_UNKNOWN_PROTOCOL;
PRInt32 colon_location = flatSpec.FindChar(':');
if (colon_location <= 0)
return NS_ERROR_UNKNOWN_PROTOCOL;
// Verify that GIO supports this URI scheme.
bool uri_scheme_supported = false;
GVfs *gvfs = g_vfs_get_default();
if (!gvfs) {
g_warning("Cannot get GVfs object.");
return NS_ERROR_UNKNOWN_PROTOCOL;
}
const gchar* const * uri_schemes = g_vfs_get_supported_uri_schemes(gvfs);
while (*uri_schemes != NULL) {
// While flatSpec ends with ':' the uri_scheme does not. Therefore do not
// compare last character.
if (StringHead(flatSpec, colon_location).Equals(*uri_schemes)) {
uri_scheme_supported = true;
break;
}
uri_schemes++;
}
if (!uri_scheme_supported) {
return NS_ERROR_UNKNOWN_PROTOCOL;
}
}
nsresult rv;
nsCOMPtr<nsIStandardURL> url =
do_CreateInstance(NS_STANDARDURL_CONTRACTID, &rv);
if (NS_FAILED(rv))
return rv;
rv = url->Init(nsIStandardURL::URLTYPE_STANDARD, -1, flatSpec,
aOriginCharset, aBaseURI);
if (NS_SUCCEEDED(rv))
rv = CallQueryInterface(url, aResult);
return rv;
}
NS_IMETHODIMP
nsGIOProtocolHandler::NewChannel(nsIURI *aURI, nsIChannel **aResult)
{
NS_ENSURE_ARG_POINTER(aURI);
nsresult rv;
nsCAutoString spec;
rv = aURI->GetSpec(spec);
if (NS_FAILED(rv))
return rv;
nsRefPtr<nsGIOInputStream> stream = new nsGIOInputStream(spec);
if (!stream)
{
rv = NS_ERROR_OUT_OF_MEMORY;
}
else
{
// start out assuming an unknown content-type. we'll set the content-type
// to something better once we open the URI.
rv = NS_NewInputStreamChannel(aResult,
aURI,
stream,
NS_LITERAL_CSTRING(UNKNOWN_CONTENT_TYPE));
if (NS_SUCCEEDED(rv))
stream->SetChannel(*aResult);
}
return rv;
}
NS_IMETHODIMP
nsGIOProtocolHandler::AllowPort(PRInt32 aPort,
const char *aScheme,
bool *aResult)
{
// Don't override anything.
*aResult = false;
return NS_OK;
}
NS_IMETHODIMP
nsGIOProtocolHandler::Observe(nsISupports *aSubject,
const char *aTopic,
const PRUnichar *aData)
{
if (strcmp(aTopic, NS_PREFBRANCH_PREFCHANGE_TOPIC_ID) == 0) {
nsCOMPtr<nsIPrefBranch> prefs = do_QueryInterface(aSubject);
InitSupportedProtocolsPref(prefs);
}
return NS_OK;
}
//-----------------------------------------------------------------------------
#define NS_GIOPROTOCOLHANDLER_CID \
{ /* ee706783-3af8-4d19-9e84-e2ebfe213480 */ \
0xee706783, \
0x3af8, \
0x4d19, \
{0x9e, 0x84, 0xe2, 0xeb, 0xfe, 0x21, 0x34, 0x80} \
}
NS_GENERIC_FACTORY_CONSTRUCTOR_INIT(nsGIOProtocolHandler, Init)
NS_DEFINE_NAMED_CID(NS_GIOPROTOCOLHANDLER_CID);
static const mozilla::Module::CIDEntry kVFSCIDs[] = {
{ &kNS_GIOPROTOCOLHANDLER_CID, false, NULL, nsGIOProtocolHandlerConstructor },
{ NULL }
};
static const mozilla::Module::ContractIDEntry kVFSContracts[] = {
{ NS_NETWORK_PROTOCOL_CONTRACTID_PREFIX MOZ_GIO_SCHEME, &kNS_GIOPROTOCOLHANDLER_CID },
{ NULL }
};
static const mozilla::Module kVFSModule = {
mozilla::Module::kVersion,
kVFSCIDs,
kVFSContracts
};
NSMODULE_DEFN(nsGIOModule) = &kVFSModule;
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку