pjs/layout/base/nsCSSRendering.h

403 строки
17 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef nsCSSRendering_h___
#define nsCSSRendering_h___
#include "nsIRenderingContext.h"
struct nsPoint;
class nsStyleContext;
class nsIPresContext;
class nsCSSRendering {
public:
/**
* Render the border for an element using css rendering rules
* for borders. aSkipSides is a bitmask of the sides to skip
* when rendering. If 0 then no sides are skipped.
*
* Both aDirtyRect and aBorderArea are in the local coordinate space
* of aForFrame
*/
static void PaintBorder(nsIPresContext* aPresContext,
nsIRenderingContext& aRenderingContext,
nsIFrame* aForFrame,
const nsRect& aDirtyRect,
const nsRect& aBorderArea,
const nsStyleBorder& aBorderStyle,
nsStyleContext* aStyleContext,
PRIntn aSkipSides,
nsRect* aGap = 0,
nscoord aHardBorderSize = 0,
PRBool aShouldIgnoreRounded = PR_FALSE);
/**
* Render the outline for an element using css rendering rules
* for borders. aSkipSides is a bitmask of the sides to skip
* when rendering. If 0 then no sides are skipped.
*
* Both aDirtyRect and aBorderArea are in the local coordinate space
* of aForFrame
*/
static void PaintOutline(nsIPresContext* aPresContext,
nsIRenderingContext& aRenderingContext,
nsIFrame* aForFrame,
const nsRect& aDirtyRect,
const nsRect& aBorderArea,
const nsStyleBorder& aBorderStyle,
const nsStyleOutline& aOutlineStyle,
nsStyleContext* aStyleContext,
PRIntn aSkipSides,
nsRect* aGap = 0);
/**
* Just like PaintBorder, but takes as input a list of border segments
* rather than a single border style. Useful for any object that needs to
* draw a border where an edge is not necessarily homogenous.
* Render the border for an element using css rendering rules
* for borders. aSkipSides is a bitmask of the sides to skip
* when rendering. If 0 then no sides are skipped.
*
* Both aDirtyRect and aBorderArea are in the local coordinate space
* of aForFrame
*/
static void PaintBorderEdges(nsIPresContext* aPresContext,
nsIRenderingContext& aRenderingContext,
nsIFrame* aForFrame,
const nsRect& aDirtyRect,
const nsRect& aBorderArea,
nsBorderEdges * aBorderEdges,
nsStyleContext* aStyleContext,
PRIntn aSkipSides,
nsRect* aGap = 0);
/**
* Fill in an nsStyleBackground to be used to paint the background for
* an element. The nsStyleBackground should first be initialized
* using the pres context. This applies the rules for propagating
* backgrounds between BODY, the root element, and the canvas.
*/
static PRBool FindBackground(nsIPresContext* aPresContext,
nsIFrame* aForFrame,
const nsStyleBackground** aBackground,
PRBool* aIsCanvas);
/**
* Find a non-transparent background, for various table-related and
* HR-related backwards-compatibility hacks. Be very hesitant if
* you're considering calling this function -- it's usually not what
* you want.
*/
static const nsStyleBackground*
FindNonTransparentBackground(nsStyleContext* aContext,
PRBool aStartAtParent = PR_FALSE);
/**
* Render the background for an element using css rendering rules
* for backgrounds.
*
* Both aDirtyRect and aBorderArea are in the local coordinate space
* of aForFrame
*/
static void PaintBackground(nsIPresContext* aPresContext,
nsIRenderingContext& aRenderingContext,
nsIFrame* aForFrame,
const nsRect& aDirtyRect,
const nsRect& aBorderArea,
const nsStyleBorder& aBorder,
const nsStylePadding& aPadding,
PRBool aUsePrintSettings,
nsRect* aBGClipRect = nsnull);
/**
* Same as |PaintBackground|, except using the provided style context
* (which short-circuits the code that ensures that the root element's
* background is drawn on the canvas.
*/
static void PaintBackgroundWithSC(nsIPresContext* aPresContext,
nsIRenderingContext& aRenderingContext,
nsIFrame* aForFrame,
const nsRect& aDirtyRect,
const nsRect& aBorderArea,
const nsStyleBackground& aColor,
const nsStyleBorder& aBorder,
const nsStylePadding& aPadding,
PRBool aUsePrintSettings = PR_FALSE,
nsRect* aBGClipRect = nsnull);
/**
* Called by the presShell when painting is finished, so we can clear our
* inline background data cache.
*/
static void DidPaint();
static void DrawDashedSides(PRIntn startSide,
nsIRenderingContext& aContext,
const nsRect& aDirtyRect,
const PRUint8 borderStyles[],
const nscolor borderColors[],
const nsRect& borderOutside,
const nsRect& borderInside,
PRIntn aSkipSides,
nsRect* aGap);
static void DrawDashedSides(PRIntn startSide,
nsIRenderingContext& aContext,
const nsRect& aDirtyRect,
const nsStyleColor* aColorStyle,
const nsStyleBorder* aBorderStyle,
const nsStyleOutline* aOutlineStyle,
PRBool aDoOutline,
const nsRect& borderOutside,
const nsRect& borderInside,
PRIntn aSkipSides,
nsRect* aGap);
/** draw the dashed segements of a segmented border */
//XXX: boy is it annoying that we have 3 methods to draw dashed sides!
// they clearly can be factored.
static void DrawDashedSegments(nsIRenderingContext& aContext,
const nsRect& aBounds,
nsBorderEdges * aBorderEdges,
PRIntn aSkipSides,
nsRect* aGap);
// Draw a border segment in the table collapsing border model without beveling corners
static void DrawTableBorderSegment(nsIRenderingContext& aContext,
PRUint8 aBorderStyle,
nscolor aBorderColor,
const nsStyleBackground* aBGColor,
const nsRect& aBorderRect,
float aPixelsToTwips,
PRUint8 aStartBevelSide = 0,
nscoord aStartBevelOffset = 0,
PRUint8 aEndBevelSide = 0,
nscoord aEndBevelOffset = 0);
/**
* transform a color to a color that will show up on a printer if needed
* aMapColor - color to evaluate
* aIsPrinter - Is this a printing device
* return - the transformed color
*/
static nscolor TransformColor(nscolor aMapColor,PRBool aNoBackGround);
protected:
/**
* Render the border for an element using css rendering rules
* for borders. aSkipSides is a bitmask of the sides to skip
* when rendering. If 0 then no sides are skipped.
* Both aDirtyRect and aBorderArea are in the local coordinate space
* of aForFrame
*/
static void PaintRoundedBorder(nsIPresContext* aPresContext,
nsIRenderingContext& aRenderingContext,
nsIFrame* aForFrame,
const nsRect& aDirtyRect,
const nsRect& aBorderArea,
const nsStyleBorder* aBorderStyle,
const nsStyleOutline* aOutlineStyle,
nsStyleContext* aStyleContext,
PRIntn aSkipSides,
PRInt16 aBorderRadius[4],nsRect* aGap = 0,
PRBool aIsOutline=PR_FALSE);
static void RenderSide(nsFloatPoint aPoints[],nsIRenderingContext& aRenderingContext,
const nsStyleBorder* aBorderStyle,const nsStyleOutline* aOutlineStyle,nsStyleContext* aStyleContext,
PRUint8 aSide,nsMargin &aBorThick,nscoord aTwipsPerPixel,
PRBool aIsOutline=PR_FALSE);
static void PaintBackgroundColor(nsIPresContext* aPresContext,
nsIRenderingContext& aRenderingContext,
nsIFrame* aForFrame,
const nsRect& aBgClipArea,
const nsStyleBackground& aColor,
const nsStyleBorder& aBorder,
const nsStylePadding& aPadding,
PRBool aCanPaintNonWhite);
static void PaintRoundedBackground(nsIPresContext* aPresContext,
nsIRenderingContext& aRenderingContext,
nsIFrame* aForFrame,
const nsRect& aBorderArea,
const nsStyleBackground& aColor,
const nsStyleBorder& aBorder,
PRInt16 aTheRadius[4],
PRBool aCanPaintNonWhite);
static nscolor MakeBevelColor(PRIntn whichSide, PRUint8 style,
nscolor aBackgroundColor,
nscolor aBorderColor,
PRBool aSpecialCase);
static PRIntn MakeSide(nsPoint aPoints[],
nsIRenderingContext& aContext,
PRIntn whichSide,
const nsRect& outside, const nsRect& inside,
PRIntn aSkipSides,
PRIntn borderPart, float borderFrac,
nscoord twipsPerPixel);
static void DrawSide(nsIRenderingContext& aContext,
PRIntn whichSide,
const PRUint8 borderStyle,
const nscolor borderColor,
const nscolor aBackgroundColor,
const nsRect& borderOutside,
const nsRect& borderInside,
PRIntn aSkipSides,
nscoord twipsPerPixel,
nsRect* aGap = 0);
static void DrawCompositeSide(nsIRenderingContext& aContext,
PRIntn aWhichSide,
nsBorderColors* aCompositeColors,
const nsRect& aOuterRect,
const nsRect& aInnerRect,
PRInt16* aBorderRadii,
nscoord aTwipsPerPixel,
nsRect* aGap);
static void DrawLine (nsIRenderingContext& aContext,
nscoord aX1, nscoord aY1, nscoord aX2, nscoord aY2,
nsRect* aGap);
static void FillPolygon (nsIRenderingContext& aContext,
const nsPoint aPoints[],
PRInt32 aNumPoints,
nsRect* aGap);
};
/** ---------------------------------------------------
* Class QBCurve, a quadratic bezier curve, used to implement the rounded rectangles
* @update 3/26/99 dwc
*/
class QBCurve
{
public:
nsFloatPoint mAnc1;
nsFloatPoint mCon;
nsFloatPoint mAnc2;
QBCurve() {mAnc1.x=0;mAnc1.y=0;mCon=mAnc2=mAnc1;}
void SetControls(nsFloatPoint &aAnc1,nsFloatPoint &aCon,nsFloatPoint &aAnc2) { mAnc1 = aAnc1; mCon = aCon; mAnc2 = aAnc2;}
void SetPoints(float a1x,float a1y,float acx,float acy,float a2x,float a2y) {mAnc1.MoveTo(a1x,a1y),mCon.MoveTo(acx,acy),mAnc2.MoveTo(a2x,a2y);}
/** ---------------------------------------------------
* Divide a Quadratic curve into line segments if it is not smaller than a certain size
* else it is so small that it can be approximated by 2 lineto calls
* @param aRenderingContext -- The RenderingContext to use to draw with
* @param aPointArray[] -- A list of points we can put line calls into instead of drawing. If null, lines are drawn
* @param aCurInex -- a pointer to an Integer that tells were to put the points into the array, incremented when finished
* @update 3/26/99 dwc
*/
void SubDivide(nsIRenderingContext *aRenderingContext,nsPoint aPointArray[],PRInt32 *aCurIndex);
/** ---------------------------------------------------
* Divide a Quadratic Bezier curve at the mid-point
* @update 3/26/99 dwc
* @param aCurve1 -- Curve 1 as a result of the division
* @param aCurve2 -- Curve 2 as a result of the division
*/
void MidPointDivide(QBCurve *A,QBCurve *B);
};
/** ---------------------------------------------------
* Class RoundedRect, A class to encapsulate all the rounded rect functionality,
* which are based on the QBCurve
* @update 4/13/99 dwc
*/
class RoundedRect
{
public:
PRInt32 mRoundness[4];
PRBool mDoRound;
PRInt32 mLeft;
PRInt32 mRight;
PRInt32 mTop;
PRInt32 mBottom;
/**
* Construct a rounded rectangle object
* @update 4/19/99
*/
void RoundRect() {mRoundness[0]=0;}
/**
* Set the curves boundaries and then break it up into the curve pieces for rendering
* @update 4/13/99 dwc
* @param aLeft -- Left side of bounding box
* @param aTop -- Top side of bounding box
* @param aWidth -- Width of bounding box
* @param aHeight -- Height of bounding box
* @param aRadius -- radius for the rounding
*/
void Set(nscoord aLeft,nscoord aTop,PRInt32 aWidth,PRInt32 aHeight,PRInt16 aRadius[4],PRInt16 aNumTwipPerPix);
/**
* Calculate the inset of a curve based on a border
* @update 4/13/99 dwc
* @param aLeft -- Left side of bounding box
* @param aTop -- Top side of bounding box
*/
void CalcInsetCurves(QBCurve &aULCurve,QBCurve &aURCurve,QBCurve &aLLCurve,QBCurve &aLRCurve,nsMargin &aBorder);
/** ---------------------------------------------------
* set the passed in curves to the rounded borders of the rectangle
* @update 4/13/99 dwc
* @param aULCurve -- upperleft curve
* @param aURCurve -- upperright curve
* @param aLRCurve -- lowerright curve
* @param aLLCurve -- lowerleft curve
*/
void GetRoundedBorders(QBCurve &aULCurve,QBCurve &aURCurve,QBCurve &aLLCurve,QBCurve &aLRCurve);
};
#endif /* nsCSSRendering_h___ */