pjs/extensions/xforms/nsXFormsSubmissionElement.cpp

2442 строки
80 KiB
C++

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla XForms support.
*
* The Initial Developer of the Original Code is
* IBM Corporation.
* Portions created by the Initial Developer are Copyright (C) 2004
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Darin Fisher <darin@meer.net>
* Doron Rosenberg <doronr@us.ibm.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifdef DEBUG_darinf
#include <stdio.h>
#define LOG(args) printf args
#else
#define LOG(args)
#endif
#include <stdlib.h>
#include "nsXFormsSubmissionElement.h"
#include "nsXFormsAtoms.h"
#include "nsIInstanceElementPrivate.h"
#include "nsIXTFElementWrapper.h"
#include "nsIDOMDocument.h"
#include "nsIDOMElement.h"
#include "nsIDOMAttr.h"
#include "nsIDOMText.h"
#include "nsIDOMCDATASection.h"
#include "nsIDOMEvent.h"
#include "nsIDOMDocumentEvent.h"
#include "nsIDOMEventTarget.h"
#include "nsIDOMEventListener.h"
#include "nsIDOM3Node.h"
#include "nsIDOMNodeList.h"
#include "nsIDOMXMLDocument.h"
#include "nsIDOMXPathResult.h"
#include "nsIDOMSerializer.h"
#include "nsIDOMDOMImplementation.h"
#include "nsIDOMProcessingInstruction.h"
#include "nsIDOMParser.h"
#include "nsIAttribute.h"
#include "nsComponentManagerUtils.h"
#include "nsStringStream.h"
#include "nsIDocShell.h"
#include "nsIInputStream.h"
#include "nsIStorageStream.h"
#include "nsIMultiplexInputStream.h"
#include "nsIMIMEInputStream.h"
#include "nsINameSpaceManager.h"
#include "nsIContent.h"
#include "nsIFileURL.h"
#include "nsIMIMEService.h"
#include "nsIUploadChannel.h"
#include "nsIHttpChannel.h"
#include "nsIScriptSecurityManager.h"
#include "nsIPipe.h"
#include "nsLinebreakConverter.h"
#include "nsEscape.h"
#include "nsString.h"
#include "nsMemory.h"
#include "nsCOMPtr.h"
#include "nsNetUtil.h"
#include "nsXFormsUtils.h"
#include "nsIDOMNamedNodeMap.h"
#include "nsIPermissionManager.h"
#include "nsIPrefBranch.h"
#include "nsIPrefService.h"
#include "nsIMIMEHeaderParam.h"
#include "nsIExternalProtocolService.h"
#include "nsEscape.h"
#include "nsAutoPtr.h"
// namespace literals
#define kXMLNSNameSpaceURI \
NS_LITERAL_STRING("http://www.w3.org/2000/xmlns/")
#define kIncludeNamespacePrefixes \
NS_LITERAL_STRING("includenamespaceprefixes")
// submission methods
#define METHOD_GET 0x01
#define METHOD_POST 0x02
#define METHOD_PUT 0x04
// submission encodings
#define ENCODING_XML 0x10 // application/xml
#define ENCODING_URL 0x20 // application/x-www-form-urlencoded
#define ENCODING_MULTIPART_RELATED 0x40 // multipart/related
#define ENCODING_MULTIPART_FORM_DATA 0x80 // multipart/form-data
struct SubmissionFormat
{
const char *method;
PRUint32 format;
};
static const SubmissionFormat sSubmissionFormats[] = {
{ "post", ENCODING_XML | METHOD_POST },
{ "get", ENCODING_URL | METHOD_GET },
{ "put", ENCODING_XML | METHOD_PUT },
{ "multipart-post", ENCODING_MULTIPART_RELATED | METHOD_POST },
{ "form-data-post", ENCODING_MULTIPART_FORM_DATA | METHOD_POST },
{ "urlencoded-post", ENCODING_URL | METHOD_POST }
};
static PRUint32
GetSubmissionFormat(nsIDOMElement *aElement)
{
nsAutoString method;
aElement->GetAttribute(NS_LITERAL_STRING("method"), method);
NS_ConvertUTF16toUTF8 utf8method(method);
for (PRUint32 i=0; i<NS_ARRAY_LENGTH(sSubmissionFormats); ++i)
{
// XXX case sensitive compare ok?
if (utf8method.Equals(sSubmissionFormats[i].method))
return sSubmissionFormats[i].format;
}
return 0;
}
#define ELEMENT_ENCTYPE_STRING 0
#define ELEMENT_ENCTYPE_URI 1
#define ELEMENT_ENCTYPE_BASE64 2
#define ELEMENT_ENCTYPE_HEX 3
static void
MakeMultipartBoundary(nsCString &boundary)
{
boundary.AssignLiteral("---------------------------");
boundary.AppendInt(rand());
boundary.AppendInt(rand());
boundary.AppendInt(rand());
}
static void
MakeMultipartContentID(nsCString &cid)
{
cid.AppendInt(rand(), 16);
cid.Append('.');
cid.AppendInt(rand(), 16);
cid.AppendLiteral("@mozilla.org");
}
static nsresult
URLEncode(const nsString &buf, nsCString &result)
{
// 1. convert to UTF-8
// 2. normalize newlines to \r\n
// 3. escape, converting ' ' to '+'
NS_ConvertUTF16toUTF8 utf8Buf(buf);
char *convertedBuf =
nsLinebreakConverter::ConvertLineBreaks(utf8Buf.get(),
nsLinebreakConverter::eLinebreakAny,
nsLinebreakConverter::eLinebreakNet);
NS_ENSURE_TRUE(convertedBuf, NS_ERROR_OUT_OF_MEMORY);
char *escapedBuf = nsEscape(convertedBuf, url_XPAlphas);
nsMemory::Free(convertedBuf);
NS_ENSURE_TRUE(escapedBuf, NS_ERROR_OUT_OF_MEMORY);
result.Adopt(escapedBuf);
return NS_OK;
}
static void
GetMimeTypeFromFile(nsIFile *file, nsCString &result)
{
nsCOMPtr<nsIMIMEService> mime = do_GetService("@mozilla.org/mime;1");
if (mime)
mime->GetTypeFromFile(file, result);
if (result.IsEmpty())
result.Assign("application/octet-stream");
}
static PRBool
HasToken(const nsString &aTokenList, const nsString &aToken)
{
PRInt32 i = aTokenList.Find(aToken);
if (i == kNotFound)
return PR_FALSE;
// else, check that leading and trailing characters are either
// not present or whitespace (#x20, #x9, #xD or #xA).
if (i > 0)
{
PRUnichar c = aTokenList[i - 1];
if (!(c == 0x20 || c == 0x9 || c == 0xD || c == 0xA))
return PR_FALSE;
}
if (i + aToken.Length() < aTokenList.Length())
{
PRUnichar c = aTokenList[i + aToken.Length()];
if (!(c == 0x20 || c == 0x9 || c == 0xD || c == 0xA))
return PR_FALSE;
}
return PR_TRUE;
}
// structure used to store information needed to generate attachments
// for multipart/related submission.
struct SubmissionAttachment
{
nsCOMPtr<nsIFile> file;
nsCString cid;
};
// an array of SubmissionAttachment objects
class SubmissionAttachmentArray : nsVoidArray
{
public:
SubmissionAttachmentArray() {}
~SubmissionAttachmentArray()
{
for (PRUint32 i=0; i<Count(); ++i)
delete (SubmissionAttachment *) ElementAt(i);
}
nsresult Append(nsIFile *file, const nsCString &cid)
{
SubmissionAttachment *a = new SubmissionAttachment;
if (!a)
return NS_ERROR_OUT_OF_MEMORY;
a->file = file;
a->cid = cid;
AppendElement(a);
return NS_OK;
}
PRUint32 Count() const
{
return (PRUint32) nsVoidArray::Count();
}
SubmissionAttachment *Item(PRUint32 index)
{
return (SubmissionAttachment *) ElementAt(index);
}
};
// nsISupports
NS_IMPL_ISUPPORTS_INHERITED4(nsXFormsSubmissionElement,
nsXFormsStubElement,
nsIRequestObserver,
nsIXFormsSubmissionElement,
nsIInterfaceRequestor,
nsIChannelEventSink)
// nsIXTFElement
NS_IMETHODIMP
nsXFormsSubmissionElement::OnDestroyed()
{
mElement = nsnull;
return NS_OK;
}
NS_IMETHODIMP
nsXFormsSubmissionElement::HandleDefault(nsIDOMEvent *aEvent, PRBool *aHandled)
{
if (!nsXFormsUtils::EventHandlingAllowed(aEvent, mElement))
return NS_OK;
nsAutoString type;
aEvent->GetType(type);
if (type.EqualsLiteral("xforms-submit")) {
// If the submission is already active, do nothing.
if (!mSubmissionActive && NS_FAILED(Submit())) {
EndSubmit(PR_FALSE);
}
*aHandled = PR_TRUE;
} else {
*aHandled = PR_FALSE;
}
return NS_OK;
}
// nsIXFormsSubmissionElement
NS_IMETHODIMP
nsXFormsSubmissionElement::SetActivator(nsIXFormsSubmitElement* aActivator)
{
if (!mActivator && !mSubmissionActive)
mActivator = aActivator;
return NS_OK;
}
// nsIXTFElement
NS_IMETHODIMP
nsXFormsSubmissionElement::OnCreated(nsIXTFElementWrapper *aWrapper)
{
aWrapper->SetNotificationMask(nsIXTFElement::NOTIFY_HANDLE_DEFAULT);
nsCOMPtr<nsIDOMElement> node;
aWrapper->GetElementNode(getter_AddRefs(node));
// It's ok to keep a weak pointer to mElement. mElement will have an
// owning reference to this object, so as long as we null out mElement in
// OnDestroyed, it will always be valid.
mElement = node;
NS_ASSERTION(mElement, "Wrapper is not an nsIDOMElement, we'll crash soon");
return NS_OK;
}
// nsIInterfaceRequestor
NS_IMETHODIMP
nsXFormsSubmissionElement::GetInterface(const nsIID & aIID, void **aResult)
{
*aResult = nsnull;
return QueryInterface(aIID, aResult);
}
// nsIChannelEventSink
// It is possible that the submission element could well on its way to invalid
// by the time that the below handlers are called. If the document was
// destroyed after we've already started submitting data then this will cause
// mElement to become null. Since the channel will hold a nsCOMPtr
// to the nsXFormsSubmissionElement as a callback to the channel, this prevents
// it from being freed up. The channel will still be able to call the
// nsIStreamListener functions that we implement here. And calling
// mChannel->Cancel() is no guarantee that these other notifications won't come
// through if the timing is wrong. So we need to check for mElement below
// before we handle any of the stream notifications.
NS_IMETHODIMP
nsXFormsSubmissionElement::OnChannelRedirect(nsIChannel *aOldChannel,
nsIChannel *aNewChannel,
PRUint32 aFlags)
{
if (!mElement) {
return NS_OK;
}
NS_PRECONDITION(aNewChannel, "Redirect without a channel?");
nsCOMPtr<nsIURI> newURI;
nsresult rv = aNewChannel->GetURI(getter_AddRefs(newURI));
NS_ENSURE_SUCCESS(rv, rv);
NS_ENSURE_STATE(mElement);
nsCOMPtr<nsIDOMDocument> domDoc;
mElement->GetOwnerDocument(getter_AddRefs(domDoc));
nsCOMPtr<nsIDocument> doc(do_QueryInterface(domDoc));
NS_ENSURE_STATE(doc);
if (!CheckSameOrigin(doc, newURI)) {
nsXFormsUtils::ReportError(NS_LITERAL_STRING("submitSendOrigin"),
mElement);
return NS_ERROR_ABORT;
}
return NS_OK;
}
NS_IMETHODIMP
nsXFormsSubmissionElement::OnStartRequest(nsIRequest *aRequest,
nsISupports *aCtx)
{
return NS_OK;
}
NS_IMETHODIMP
nsXFormsSubmissionElement::OnStopRequest(nsIRequest *aRequest,
nsISupports *aCtx,
nsresult aStatus)
{
LOG(("xforms submission complete [status=%x]\n", aStatus));
if (!mElement) {
return NS_OK;
}
nsCOMPtr<nsIChannel> channel = do_QueryInterface(aRequest);
NS_ASSERTION(channel, "request should be a channel");
PRBool succeeded = NS_SUCCEEDED(aStatus);
if (succeeded) {
// If it is a HTTP request, then check for error responses, which should
// result in NOP and an xforms-submit-error.
nsCOMPtr<nsIHttpChannel> httpChannel = do_QueryInterface(channel);
if (httpChannel) {
PRUint32 response;
nsresult rv = httpChannel->GetResponseStatus(&response);
succeeded = NS_SUCCEEDED(rv) && (response < 400);
}
if (succeeded) {
PRUint32 avail = 0;
mPipeIn->Available(&avail);
if (avail > 0) {
nsresult rv;
if (mIsReplaceInstance) {
rv = LoadReplaceInstance(channel);
} else {
nsAutoString replace;
mElement->GetAttribute(NS_LITERAL_STRING("replace"), replace);
if (replace.IsEmpty() || replace.EqualsLiteral("all"))
rv = LoadReplaceAll(channel);
else
rv = NS_OK;
}
succeeded = NS_SUCCEEDED(rv);
}
}
}
mPipeIn = 0;
EndSubmit(succeeded);
return NS_OK;
}
// private methods
void
nsXFormsSubmissionElement::EndSubmit(PRBool aSucceeded)
{
mSubmissionActive = PR_FALSE;
if (mActivator) {
mActivator->SetDisabled(PR_FALSE);
mActivator = nsnull;
}
nsXFormsUtils::DispatchEvent(mElement, aSucceeded ?
eEvent_SubmitDone : eEvent_SubmitError);
}
already_AddRefed<nsIModelElementPrivate>
nsXFormsSubmissionElement::GetModel()
{
nsCOMPtr<nsIDOMNode> parentNode;
mElement->GetParentNode(getter_AddRefs(parentNode));
nsIModelElementPrivate *model = nsnull;
if (parentNode)
CallQueryInterface(parentNode, &model);
return model;
}
nsresult
nsXFormsSubmissionElement::LoadReplaceInstance(nsIChannel *channel)
{
NS_ASSERTION(channel, "LoadReplaceInstance called with null channel?");
// replace instance document
nsCString contentCharset;
channel->GetContentCharset(contentCharset);
// use DOM parser to construct nsIDOMDocument
nsCOMPtr<nsIDOMParser> parser = do_CreateInstance("@mozilla.org/xmlextras/domparser;1");
NS_ENSURE_STATE(parser);
PRUint32 contentLength;
mPipeIn->Available(&contentLength);
// set the base uri so that the document can get the correct security
// principal (this has to be here to work on 1.8.0)
// @see https://bugzilla.mozilla.org/show_bug.cgi?id=338451
nsCOMPtr<nsIURI> uri;
nsresult rv = channel->GetURI(getter_AddRefs(uri));
NS_ENSURE_SUCCESS(rv, rv);
// XXXbz is this the right principal?
rv = parser->Init(nsnull, uri, nsnull);
NS_ENSURE_SUCCESS(rv, rv);
nsCOMPtr<nsIDOMDocument> newDoc;
parser->ParseFromStream(mPipeIn, contentCharset.get(), contentLength,
"application/xml", getter_AddRefs(newDoc));
// XXX Add URI, etc?
if (!newDoc) {
nsXFormsUtils::ReportError(NS_LITERAL_STRING("instanceParseError"),
mElement);
return NS_ERROR_UNEXPECTED;
}
// check for parsererror tag? XXX is this needed? or, is there a better way?
nsCOMPtr<nsIDOMElement> docElem;
newDoc->GetDocumentElement(getter_AddRefs(docElem));
if (docElem) {
nsAutoString tagName, namespaceURI;
docElem->GetTagName(tagName);
docElem->GetNamespaceURI(namespaceURI);
// XXX this is somewhat of a hack. we should instead be listening for an
// 'error' event from the DOM, but gecko doesn't implement that event yet.
if (tagName.EqualsLiteral("parsererror") &&
namespaceURI.EqualsLiteral("http://www.mozilla.org/newlayout/xml/parsererror.xml")) {
nsXFormsUtils::ReportError(NS_LITERAL_STRING("instanceParseError"),
mElement);
return NS_ERROR_UNEXPECTED;
}
}
// Get the appropriate instance node. If the "instance" attribute is set,
// then get that instance node. Otherwise, get the one we are bound to.
nsCOMPtr<nsIModelElementPrivate> model = GetModel();
NS_ENSURE_STATE(model);
nsCOMPtr<nsIInstanceElementPrivate> instanceElement;
nsAutoString value;
mElement->GetAttribute(NS_LITERAL_STRING("instance"), value);
if (!value.IsEmpty()) {
rv = GetSelectedInstanceElement(value, model,
getter_AddRefs(instanceElement));
} else {
nsCOMPtr<nsIDOMNode> data;
rv = GetBoundInstanceData(getter_AddRefs(data));
if (NS_SUCCEEDED(rv)) {
nsCOMPtr<nsIDOMNode> instanceNode;
rv = nsXFormsUtils::GetInstanceNodeForData(data,
getter_AddRefs(instanceNode));
NS_ENSURE_SUCCESS(rv, rv);
instanceElement = do_QueryInterface(instanceNode);
}
}
// replace the document referenced by this instance element with the info
// returned back from the submission
if (NS_SUCCEEDED(rv) && instanceElement) {
instanceElement->SetInstanceDocument(newDoc);
// refresh everything
model->Rebuild();
model->Recalculate();
model->Revalidate();
model->Refresh();
}
return NS_OK;
}
nsresult
nsXFormsSubmissionElement::GetSelectedInstanceElement(
const nsAString &aInstanceID,
nsIModelElementPrivate *aModel,
nsIInstanceElementPrivate **aResult)
{
aModel->FindInstanceElement(aInstanceID, aResult);
if (*aResult == nsnull) {
// if failed to get desired instance, dispatch binding exception
const PRUnichar *strings[] = { PromiseFlatString(aInstanceID).get() };
nsXFormsUtils::ReportError(NS_LITERAL_STRING("instanceBindError"),
strings, 1, mElement, mElement);
nsXFormsUtils::DispatchEvent(mElement, eEvent_BindingException);
return NS_ERROR_FAILURE;
}
return NS_OK;
}
nsresult
nsXFormsSubmissionElement::LoadReplaceAll(nsIChannel *channel)
{
// use nsIDocShell::loadStream, which may not be perfect ;-)
// XXX do we need to transfer nsIChannel::securityInfo ???
nsCOMPtr<nsIContent> content(do_QueryInterface(mElement));
NS_ASSERTION(content, "mElement not implementing nsIContent?!");
nsIDocument* doc = content->GetCurrentDoc();
NS_ENSURE_STATE(doc);
// the container is the docshell, and we use it as our provider of
// notification callbacks.
nsCOMPtr<nsISupports> container = doc->GetContainer();
nsCOMPtr<nsIDocShell> docshell = do_QueryInterface(container);
nsCOMPtr<nsIURI> uri;
nsCString contentType, contentCharset;
channel->GetURI(getter_AddRefs(uri));
channel->GetContentType(contentType);
channel->GetContentCharset(contentCharset);
return docshell->LoadStream(mPipeIn, uri, contentType, contentCharset, nsnull);
}
nsresult
nsXFormsSubmissionElement::Submit()
{
LOG(("+++ nsXFormsSubmissionElement::Submit\n"));
NS_ENSURE_STATE(mElement);
nsresult rv;
mIsSOAPRequest = PR_FALSE;
//
// 1. ensure that we are not currently processing a xforms-submit (see E37)
if (mSubmissionActive) {
nsXFormsUtils::ReportError(NS_LITERAL_STRING("warnSubmitAlreadyRunning"),
mElement, nsIScriptError::warningFlag);
return NS_ERROR_FAILURE;
}
mSubmissionActive = PR_TRUE;
if (mActivator)
mActivator->SetDisabled(PR_TRUE);
// Someone may change the "replace" attribute during submission
// and that would break the ::SameOriginCheck().
nsAutoString replace;
mElement->GetAttribute(NS_LITERAL_STRING("replace"), replace);
mIsReplaceInstance = replace.EqualsLiteral("instance");
//
// 2. get selected node from the instance data
nsCOMPtr<nsIDOMNode> data;
rv = GetBoundInstanceData(getter_AddRefs(data));
NS_ENSURE_SUCCESS(rv, rv);
// No data to submit
if (!data) {
EndSubmit(PR_FALSE);
return NS_OK;
}
//
// 3. Create submission document (include namespaces, purge non-relevant
// nodes, check simple type validity)
nsCOMPtr<nsIDOMDocument> submissionDoc;
rv = CreateSubmissionDoc(data, getter_AddRefs(submissionDoc));
NS_ENSURE_SUCCESS(rv, rv);
//
// 4. Validate document
// XXX: Some unresolved issues with this, see
// bug https://bugzilla.mozilla.org/show_bug.cgi?id=278762
// if (GetBooleanAttr(NS_LITERAL_STRING("validate"), PR_TRUE))
// model->ValidateDocument(submissionDoc, &res);
//
// 5. Convert submission document into the requested format
// Checking the format only before starting the submission.
mFormat = GetSubmissionFormat(mElement);
NS_ENSURE_STATE(mFormat != 0);
nsCOMPtr<nsIInputStream> stream;
nsCAutoString uri, contentType;
GetSubmissionURI(uri);
rv = SerializeData(submissionDoc, uri, getter_AddRefs(stream), contentType);
if (NS_FAILED(rv)) {
nsXFormsUtils::ReportError(NS_LITERAL_STRING("warnSubmitSerializeFailed"),
mElement, nsIScriptError::warningFlag);
return rv;
}
//
// 6. dispatch network request
rv = SendData(uri, stream, contentType);
if (NS_FAILED(rv)) {
nsXFormsUtils::ReportError(NS_LITERAL_STRING("warnSubmitNetworkFailure"),
mElement, nsIScriptError::warningFlag);
return rv;
}
return rv;
}
nsresult
nsXFormsSubmissionElement::GetSubmissionURI(nsACString& aURI)
{
// Precedence:
// 1. If the submission element has a resource element as its first child,
// the URI can be specifed by either the 'value' attribute or the string
// content of the resource element. The resource element has precedence over
// both the 'resource' and 'action' attributes.
//
// 2. If there is no resource element as the first child, the URI may be
// specified by either the 'resource' or 'action' attributes with 'resource'
// having precedence over 'action'.
//
// If no URI is specified via any of the above mechanisms we write a warning
// message to the error console.
nsresult rv = NS_OK;
nsAutoString uri;
// First check if the first child element of submission is a resource.
nsCOMPtr<nsIDOMNode> currentNode, node, resourceNode;
mElement->GetFirstChild(getter_AddRefs(currentNode));
PRUint16 nodeType;
while (currentNode) {
currentNode->GetNodeType(&nodeType);
if (nodeType == nsIDOMNode::ELEMENT_NODE) {
// Make sure the element is a resource element.
nsAutoString localName, namespaceURI;
currentNode->GetLocalName(localName);
currentNode->GetNamespaceURI(namespaceURI);
if (localName.EqualsLiteral("resource") &&
namespaceURI.EqualsLiteral(NS_NAMESPACE_XFORMS)) {
// First child element is a resource.
resourceNode = currentNode;
}
// The resource element must be the first child, so we
// bail out as soon as we find any element.
break;
}
currentNode->GetNextSibling(getter_AddRefs(node));
currentNode.swap(node);
}
if (resourceNode) {
PRBool hasAttributes = PR_FALSE;
resourceNode->HasAttributes(&hasAttributes);
if (hasAttributes) {
nsCOMPtr<nsIDOMElement> resourceElement(do_QueryInterface(currentNode));
if (resourceElement) {
resourceElement->GetAttribute(NS_LITERAL_STRING("value"), uri);
if (!uri.IsEmpty()) {
nsCOMPtr<nsIModelElementPrivate> model;
nsCOMPtr<nsIDOMXPathResult> xpRes;
PRBool usesModelBind = PR_FALSE;
rv = nsXFormsUtils::EvaluateNodeBinding(resourceElement, 0,
NS_LITERAL_STRING("value"),
EmptyString(),
nsIDOMXPathResult::STRING_TYPE,
getter_AddRefs(model),
getter_AddRefs(xpRes),
&usesModelBind);
NS_ENSURE_SUCCESS(rv, rv);
if (xpRes) {
// Truncate uri so GetStringValue replaces the contents with the
// xpath result rather than appending to it.
uri.Truncate();
rv = xpRes->GetStringValue(uri);
NS_ENSURE_SUCCESS(rv, rv);
}
}
}
} else {
// No value attribute. Get the string content of the resource element.
nsXFormsUtils::GetNodeValue(resourceNode, uri);
}
} else {
// No resource element so check first for the resource attribute and then
// the action attribute.
mElement->GetAttribute(NS_LITERAL_STRING("resource"), uri);
if (uri.IsEmpty()) {
mElement->GetAttribute(NS_LITERAL_STRING("action"), uri);
}
}
// If no URI is specified, write a warning to the console.
if (uri.IsEmpty())
nsXFormsUtils::ReportError(NS_LITERAL_STRING("warnSubmitURI"), mElement,
nsIScriptError::warningFlag);
CopyUTF16toUTF8(uri, aURI);
return rv;
}
nsresult
nsXFormsSubmissionElement::GetBoundInstanceData(nsIDOMNode **result)
{
nsCOMPtr<nsIModelElementPrivate> model;
nsCOMPtr<nsIDOMXPathResult> xpRes;
PRBool usesModelBind;
nsresult rv =
nsXFormsUtils::EvaluateNodeBinding(mElement, 0,
NS_LITERAL_STRING("ref"),
NS_LITERAL_STRING("/"),
nsIDOMXPathResult::FIRST_ORDERED_NODE_TYPE,
getter_AddRefs(model),
getter_AddRefs(xpRes),
&usesModelBind);
if (NS_FAILED(rv) || !xpRes)
return NS_ERROR_UNEXPECTED;
return usesModelBind ? xpRes->SnapshotItem(0, result)
: xpRes->GetSingleNodeValue(result);
}
PRBool
nsXFormsSubmissionElement::GetBooleanAttr(const nsAString &name,
PRBool defaultVal)
{
nsAutoString value;
mElement->GetAttribute(name, value);
// use defaultVal when value does not match a legal literal
if (!value.IsEmpty())
{
if (value.EqualsLiteral("true") || value.EqualsLiteral("1"))
return PR_TRUE;
if (value.EqualsLiteral("false") || value.EqualsLiteral("0"))
return PR_FALSE;
}
return defaultVal;
}
void
nsXFormsSubmissionElement::GetDefaultInstanceData(nsIDOMNode **result)
{
*result = nsnull;
// default <instance> element is the first <instance> child node of
// our parent, which should be a <model> element.
nsCOMPtr<nsIDOMNode> parent;
mElement->GetParentNode(getter_AddRefs(parent));
if (!parent)
{
NS_WARNING("no parent node!");
return;
}
nsCOMPtr<nsIXFormsModelElement> model = do_QueryInterface(parent);
if (!model)
{
NS_WARNING("parent node is not a model");
return;
}
nsCOMPtr<nsIDOMDocument> instanceDoc;
model->GetInstanceDocument(EmptyString(), getter_AddRefs(instanceDoc));
nsCOMPtr<nsIDOMElement> instanceDocElem;
instanceDoc->GetDocumentElement(getter_AddRefs(instanceDocElem));
NS_ADDREF(*result = instanceDocElem);
}
nsresult
nsXFormsSubmissionElement::SerializeData(nsIDOMDocument *aData,
nsCString &aUri,
nsIInputStream **aStream,
nsCString &aContentType)
{
if (mFormat & ENCODING_XML)
return SerializeDataXML(aData, aStream, aContentType);
if (mFormat & ENCODING_URL)
return SerializeDataURLEncoded(aData, aUri, aStream, aContentType);
if (mFormat & ENCODING_MULTIPART_RELATED)
return SerializeDataMultipartRelated(aData, aStream, aContentType);
if (mFormat & ENCODING_MULTIPART_FORM_DATA)
return SerializeDataMultipartFormData(aData, aStream, aContentType);
NS_WARNING("unsupported submission encoding");
return NS_ERROR_UNEXPECTED;
}
nsresult
nsXFormsSubmissionElement::SerializeDataXML(nsIDOMDocument *data,
nsIInputStream **stream,
nsCString &contentType)
{
nsresult rv;
nsAutoString mediaType;
mElement->GetAttribute(NS_LITERAL_STRING("mediatype"), mediaType);
// Check for preference, disabling SOAP requests
if (nsXFormsUtils::ExperimentalFeaturesEnabled()) {
// Check for SOAP Envelope and handle SOAP
nsAutoString nodeName, nodeNS;
nsCOMPtr<nsIDOMElement> docElem;
data->GetDocumentElement(getter_AddRefs(docElem));
if (docElem) {
docElem->GetLocalName(nodeName);
docElem->GetNamespaceURI(nodeNS);
}
if (nodeName.Equals(NS_LITERAL_STRING("Envelope")) &&
nodeNS.Equals(NS_LITERAL_STRING(NS_NAMESPACE_SOAP_ENVELOPE))) {
mIsSOAPRequest = PR_TRUE;
nsXFormsUtils::ReportError(NS_LITERAL_STRING("warnSOAP"), mElement,
nsIScriptError::warningFlag);
contentType.AssignLiteral("text/xml");
if (!mediaType.IsEmpty()) {
// copy charset from mediatype
nsAutoString charset;
nsCOMPtr<nsIMIMEHeaderParam> mimeHdrParser =
do_GetService("@mozilla.org/network/mime-hdrparam;1");
NS_ENSURE_STATE(mimeHdrParser);
rv = mimeHdrParser->GetParameter(NS_ConvertUTF16toUTF8(mediaType),
"charset", EmptyCString(), PR_FALSE,
nsnull, charset);
if (NS_SUCCEEDED(rv) && !charset.IsEmpty()) {
contentType.AppendLiteral("; charset=");
contentType.Append(NS_ConvertUTF16toUTF8(charset));
}
}
}
}
// Handle non-SOAP requests
if (!mIsSOAPRequest) {
if (mediaType.IsEmpty())
contentType.AssignLiteral("application/xml");
else
CopyUTF16toUTF8(mediaType, contentType);
}
nsCOMPtr<nsIStorageStream> storage;
NS_NewStorageStream(4096, PR_UINT32_MAX, getter_AddRefs(storage));
NS_ENSURE_TRUE(storage, NS_ERROR_OUT_OF_MEMORY);
nsCOMPtr<nsIOutputStream> sink;
storage->GetOutputStream(0, getter_AddRefs(sink));
NS_ENSURE_TRUE(sink, NS_ERROR_OUT_OF_MEMORY);
nsCOMPtr<nsIDOMSerializer> serializer =
do_GetService("@mozilla.org/xmlextras/xmlserializer;1");
NS_ENSURE_STATE(serializer);
// Serialize content
nsAutoString encoding;
mElement->GetAttribute(NS_LITERAL_STRING("encoding"), encoding);
if (encoding.IsEmpty())
encoding.AssignLiteral("UTF-8");
// XXX: should check @indent and possibly indent content. Bug 278761
rv = serializer->SerializeToStream(data, sink,
NS_LossyConvertUTF16toASCII(encoding));
NS_ENSURE_SUCCESS(rv, rv);
// close the output stream, so that the input stream will not return
// NS_BASE_STREAM_WOULD_BLOCK when it reaches end-of-stream.
sink->Close();
return storage->NewInputStream(0, stream);
}
PRBool
nsXFormsSubmissionElement::CheckSameOrigin(nsIDocument *aBaseDocument,
nsIURI *aTestURI)
{
// we default to true to allow regular posts to work like html forms.
PRBool allowSubmission = PR_TRUE;
/* for replace="instance" or XML submission, we follow these strict guidelines:
- we default to denying submission
- if we are not replacing instance, then file:// urls can submit anywhere.
We don't allow fetching of content for file:// urls since for example
XMLHttpRequest doesn't, since file:// doesn't always mean it is local.
- if we are still denying, we check the permission manager to see if the
domain hosting the XForm has been granted permission to get/send data
anywhere
- lastly, if submission is still being denied, we do a same origin check
*/
if (mFormat & (ENCODING_XML | ENCODING_MULTIPART_RELATED) || mIsReplaceInstance) {
// if same origin is required, default to false
allowSubmission = PR_FALSE;
nsIURI *baseURI = aBaseDocument->GetDocumentURI();
// if we don't replace the instance, we allow file:// to submit data anywhere
if (!mIsReplaceInstance) {
baseURI->SchemeIs("file", &allowSubmission);
}
// if none of the above checks have allowed the submission, we do a
// same origin check.
if (!allowSubmission) {
// replace instance is both a send and a load
nsXFormsUtils::ConnectionType mode;
if (mIsReplaceInstance)
mode = nsXFormsUtils::kXFormsActionLoadSend;
else
mode = nsXFormsUtils::kXFormsActionSend;
allowSubmission =
nsXFormsUtils::CheckConnectionAllowed(mElement, aTestURI, mode);
}
}
return allowSubmission;
}
nsresult
nsXFormsSubmissionElement::AddNameSpaces(nsIDOMElement *aTarget,
nsIDOMNode *aSource,
nsStringHashSet *aPrefixHash)
{
nsCOMPtr<nsIDOMNamedNodeMap> attrMap;
nsCOMPtr<nsIDOMNode> attrNode;
nsAutoString nsURI, localName, value;
aSource->GetAttributes(getter_AddRefs(attrMap));
NS_ENSURE_STATE(attrMap);
PRUint32 length;
attrMap->GetLength(&length);
for (PRUint32 run = 0; run < length; ++run) {
attrMap->Item(run, getter_AddRefs(attrNode));
attrNode->GetNamespaceURI(nsURI);
if (nsURI.Equals(kXMLNSNameSpaceURI)) {
attrNode->GetLocalName(localName);
attrNode->GetNodeValue(value);
if (!localName.EqualsLiteral("xmlns")) {
if (!aPrefixHash || aPrefixHash->Contains(localName)) {
nsAutoString attrName(NS_LITERAL_STRING("xmlns:"));
attrName.Append(localName);
aTarget->SetAttributeNS(kXMLNSNameSpaceURI, attrName, value);
}
} else if (!value.IsEmpty()) {
PRBool hasDefaultNSAttr;
aTarget->HasAttributeNS(kXMLNSNameSpaceURI,
NS_LITERAL_STRING("xmlns"), &hasDefaultNSAttr);
if (!hasDefaultNSAttr) {
aTarget->GetNamespaceURI(nsURI);
if (!nsURI.IsEmpty()) {
// if aTarget default namespace uri isn't empty and it hasn't
// default namespace attribute then we should add it.
aTarget->SetAttributeNS(kXMLNSNameSpaceURI, localName, value);
}
}
}
}
}
return NS_OK;
}
nsresult
nsXFormsSubmissionElement::GetIncludeNSPrefixesAttr(nsStringHashSet** aHash)
{
NS_PRECONDITION(aHash, "null ptr");
if (!aHash)
return NS_ERROR_NULL_POINTER;
*aHash = new nsStringHashSet();
if (!*aHash)
return NS_ERROR_OUT_OF_MEMORY;
(*aHash)->Init(5);
nsAutoString prefixes;
mElement->GetAttribute(kIncludeNamespacePrefixes, prefixes);
// Cycle through space-delimited list and populate hash set
if (!prefixes.IsEmpty()) {
PRInt32 start = 0, end;
PRInt32 length = prefixes.Length();
do {
end = prefixes.FindCharInSet(" \t\r\n", start);
if (end != kNotFound) {
if (start != end) { // this line handles consecutive space chars
const nsAString& p = Substring(prefixes, start, end - start);
(*aHash)->Put(p);
}
start = end + 1;
}
} while (end != kNotFound && start != length);
if (start != length) {
const nsAString& p = Substring(prefixes, start);
(*aHash)->Put(p);
}
}
return NS_OK;
}
nsresult
nsXFormsSubmissionElement::CreateSubmissionDoc(nsIDOMNode *aRoot,
nsIDOMDocument **aReturnDoc)
{
NS_ENSURE_ARG_POINTER(aRoot);
NS_ENSURE_ARG_POINTER(aReturnDoc);
nsCOMPtr<nsIDOMDocument> instDoc, submDoc;
aRoot->GetOwnerDocument(getter_AddRefs(instDoc));
nsresult rv;
if (!instDoc) {
// owner doc is null when the aRoot node is the document (e.g., ref="/")
// so we can just get the document via QI.
instDoc = do_QueryInterface(aRoot);
NS_ENSURE_STATE(instDoc);
rv = CreatePurgedDoc(instDoc, getter_AddRefs(submDoc));
} else {
rv = CreatePurgedDoc(aRoot, getter_AddRefs(submDoc));
}
NS_ENSURE_SUCCESS(rv, rv);
NS_ENSURE_STATE(submDoc);
// We now need to add namespaces to the submission document. We get them
// from 3 sources - the main document's documentElement, the model and the
// xforms:instance that contains the submitted instance data node.
nsCOMPtr<nsIDOMNode> instanceNode;
rv = nsXFormsUtils::GetInstanceNodeForData(aRoot,
getter_AddRefs(instanceNode));
NS_ENSURE_SUCCESS(rv, rv);
// add namespaces from the main document to the submission document, but only
// if the instance data is local, not remote.
PRBool serialize = PR_FALSE;
nsCOMPtr<nsIDOMElement> instanceElement(do_QueryInterface(instanceNode));
// make sure that this is a DOMElement. It won't be if it was lazy
// authored. Lazy authored instance documents don't inherit namespaces
// from parent nodes or the original document (in formsPlayer and Novell,
// at least).
if (instanceElement) {
PRBool hasSrc = PR_FALSE;
instanceElement->HasAttribute(NS_LITERAL_STRING("src"), &hasSrc);
serialize = !hasSrc;
}
if (serialize) {
// Handle "includenamespaceprefixes" attribute, if present
nsAutoPtr<nsStringHashSet> prefixHash;
PRBool hasPrefixAttr = PR_FALSE;
mElement->HasAttribute(kIncludeNamespacePrefixes, &hasPrefixAttr);
if (hasPrefixAttr) {
rv = GetIncludeNSPrefixesAttr(getter_Transfers(prefixHash));
NS_ENSURE_SUCCESS(rv, rv);
}
// get the document element of the document we are going to submit
nsCOMPtr<nsIDOMElement> submDocElm;
submDoc->GetDocumentElement(getter_AddRefs(submDocElm));
NS_ENSURE_STATE(submDocElm);
// if submission document has empty default namespace attribute and if
// @includenamespaceprefixes attribute doesn't contain "#default" value then
// we should remove default namespace attribute (see the specs 11.3).
nsAutoString XMLNSAttrValue;
submDocElm->GetAttributeNS(kXMLNSNameSpaceURI, NS_LITERAL_STRING("xmlns"),
XMLNSAttrValue);
if (XMLNSAttrValue.IsEmpty() && (!prefixHash ||
!prefixHash->Contains(NS_LITERAL_STRING("#default")))) {
submDocElm->RemoveAttributeNS(kXMLNSNameSpaceURI,
NS_LITERAL_STRING("xmlns"));
}
// handle namespaces on the root element of the instance document
nsCOMPtr<nsIDOMElement> instDocElm;
instDoc->GetDocumentElement(getter_AddRefs(instDocElm));
nsCOMPtr<nsIDOMNode> instDocNode(do_QueryInterface(instDocElm));
NS_ENSURE_STATE(instDocNode);
rv = AddNameSpaces(submDocElm, instDocNode, prefixHash);
NS_ENSURE_SUCCESS(rv, rv);
// handle namespaces on the xforms:instance
rv = AddNameSpaces(submDocElm, instanceNode, prefixHash);
NS_ENSURE_SUCCESS(rv, rv);
// handle namespaces on the model
nsCOMPtr<nsIModelElementPrivate> model = GetModel();
nsCOMPtr<nsIDOMNode> modelNode(do_QueryInterface(model));
NS_ENSURE_STATE(modelNode);
rv = AddNameSpaces(submDocElm, modelNode, prefixHash);
NS_ENSURE_SUCCESS(rv, rv);
// handle namespace on main document
nsCOMPtr<nsIDOMDocument> mainDoc;
mElement->GetOwnerDocument(getter_AddRefs(mainDoc));
NS_ENSURE_STATE(mainDoc);
nsCOMPtr<nsIDOMElement> mainDocElm;
mainDoc->GetDocumentElement(getter_AddRefs(mainDocElm));
nsCOMPtr<nsIDOMNode> mainDocNode(do_QueryInterface(mainDocElm));
NS_ENSURE_STATE(mainDocNode);
rv = AddNameSpaces(submDocElm, mainDocNode, prefixHash);
NS_ENSURE_SUCCESS(rv, rv);
}
NS_ADDREF(*aReturnDoc = submDoc);
return NS_OK;
}
nsresult
nsXFormsSubmissionElement::CreatePurgedDoc(nsIDOMNode *source,
nsIDOMDocument **result)
{
PRBool omit_xml_declaration
= GetBooleanAttr(NS_LITERAL_STRING("omit-xml-declaration"), PR_FALSE);
nsAutoString cdataElements;
mElement->GetAttribute(NS_LITERAL_STRING("cdata-section-elements"),
cdataElements);
// XXX cdataElements contains space delimited QNames. these may have
// namespace prefixes relative to our document. we need to translate
// them to the corresponding namespace prefix in the source document.
//
// XXX we'll just assume that the QNames correspond to node names since
// it's unclear how to resolve the namespace prefixes any other way.
// source can be a document or just a node
nsCOMPtr<nsIDOMDocument> sourceDoc(do_QueryInterface(source));
nsCOMPtr<nsIDOMDOMImplementation> impl;
if (sourceDoc) {
sourceDoc->GetImplementation(getter_AddRefs(impl));
} else {
nsCOMPtr<nsIDOMDocument> tmpDoc;
source->GetOwnerDocument(getter_AddRefs(tmpDoc));
tmpDoc->GetImplementation(getter_AddRefs(impl));
}
NS_ENSURE_STATE(impl);
nsCOMPtr<nsIDOMDocument> doc;
impl->CreateDocument(EmptyString(), EmptyString(), nsnull,
getter_AddRefs(doc));
NS_ENSURE_STATE(doc);
if (!omit_xml_declaration) {
nsAutoString encoding;
mElement->GetAttribute(NS_LITERAL_STRING("encoding"), encoding);
if (encoding.IsEmpty())
encoding.AssignLiteral("UTF-8");
nsAutoString buf =
NS_LITERAL_STRING("version=\"1.0\" encoding=\"") +
encoding +
NS_LITERAL_STRING("\"");
if (GetBooleanAttr(NS_LITERAL_STRING("standalone"), PR_FALSE))
buf += NS_LITERAL_STRING(" standalone=\"yes\"");
nsCOMPtr<nsIDOMProcessingInstruction> pi;
doc->CreateProcessingInstruction(NS_LITERAL_STRING("xml"), buf,
getter_AddRefs(pi));
nsCOMPtr<nsIDOMNode> newChild;
doc->AppendChild(pi, getter_AddRefs(newChild));
}
// recursively walk the source document, copying nodes as appropriate
nsCOMPtr<nsIModelElementPrivate> model = GetModel();
NS_ENSURE_STATE(model);
nsresult rv = NS_OK;
// if it is a document, get the root element
if (sourceDoc) {
// Iterate over document child nodes to preserve document level
// processing instructions and comment nodes.
nsCOMPtr<nsIDOMNode> curDocNode, node, destChild;
sourceDoc->GetFirstChild(getter_AddRefs(curDocNode));
PRUint16 type;
while (curDocNode) {
curDocNode->GetNodeType(&type);
if (type == nsIDOMNode::ELEMENT_NODE) {
rv = CopyChildren(model, curDocNode, doc, doc, cdataElements, 0);
NS_ENSURE_SUCCESS(rv, rv);
} else {
doc->ImportNode(curDocNode, PR_FALSE, getter_AddRefs(destChild));
doc->AppendChild(destChild, getter_AddRefs(node));
}
curDocNode->GetNextSibling(getter_AddRefs(node));
curDocNode.swap(node);
}
} else {
rv = CopyChildren(model, source, doc, doc, cdataElements, 0);
NS_ENSURE_SUCCESS(rv, rv);
}
NS_ADDREF(*result = doc);
return NS_OK;
}
nsresult
nsXFormsSubmissionElement::CreateAttachments(nsIModelElementPrivate *aModel,
nsIDOMNode *aNode,
SubmissionAttachmentArray *aAttachments)
{
nsCOMPtr<nsIDOMNode> currentNode(aNode);
while (currentNode) {
PRUint16 currentNodeType;
nsresult rv = currentNode->GetNodeType(&currentNodeType);
NS_ENSURE_SUCCESS(rv, rv);
// If |currentNode| is an element node of type 'xsd:anyURI', we need to
// generate a ContentID for the child of this element, and append a new
// attachment to the attachments array.
PRUint32 encType;
if (NS_SUCCEEDED(GetElementEncodingType(currentNode, &encType, aModel)) &&
encType == ELEMENT_ENCTYPE_URI) {
// ok, looks like we have a local file to upload
// uploadFileProperty can exist on attribute nodes if an upload is bound
// to an attribute. But we'll have to look for such attributes as we
// we encounter the element nodes that contain them. We won't reach
// attributes walking the child/sibling chain of nodes. So here just
// test for nsIContent.
void* uploadFileProperty = nsnull;
nsCOMPtr<nsIContent> content = do_QueryInterface(currentNode);
if (content) {
uploadFileProperty =
content->GetProperty(nsXFormsAtoms::uploadFileProperty);
}
nsIFile *file = static_cast<nsIFile *>(uploadFileProperty);
// NOTE: this value may be null if a file hasn't been selected.
if (uploadFileProperty) {
nsCString cid;
cid.AssignLiteral("cid:");
MakeMultipartContentID(cid);
nsCOMPtr<nsIDOMNode> childNode;
switch (currentNodeType) {
case nsIDOMNode::TEXT_NODE:
case nsIDOMNode::CDATA_SECTION_NODE:
case nsIDOMNode::PROCESSING_INSTRUCTION_NODE:
case nsIDOMNode::COMMENT_NODE:
rv = currentNode->SetNodeValue(NS_ConvertUTF8toUTF16(cid));
NS_ENSURE_SUCCESS(rv, rv);
break;
case nsIDOMNode::ELEMENT_NODE:
rv = currentNode->GetFirstChild(getter_AddRefs(childNode));
NS_ENSURE_SUCCESS(rv, rv);
// shouldn't have to worry about the case of there not being a child
// node here. If uploadFileProperty is set then that means that
// the node that 'currentNode' was cloned from has has gone through
// through model.SetNodeValue, so should already have a text node
// as the first child and no extraneous text nodes
// following the first one. We'll check to make sure, though.
PRUint16 childType;
rv = childNode->GetNodeType(&childType);
NS_ENSURE_SUCCESS(rv, rv);
if (childType == nsIDOMNode::TEXT_NODE ||
childType == nsIDOMNode::CDATA_SECTION_NODE) {
rv = childNode->SetNodeValue(NS_ConvertUTF8toUTF16(cid));
NS_ENSURE_SUCCESS(rv, rv);
} else {
return NS_ERROR_UNEXPECTED;
}
}
aAttachments->Append(file, cid);
}
}
// look to see if the element node has any attributes with an
// uploadFileProperty on it.
if (currentNodeType == nsIDOMNode::ELEMENT_NODE) {
PRBool hasAttributes = PR_FALSE;
currentNode->HasAttributes(&hasAttributes);
if (hasAttributes) {
nsCOMPtr<nsIDOMNamedNodeMap> attrs;
currentNode->GetAttributes(getter_AddRefs(attrs));
NS_ENSURE_STATE(attrs);
PRUint32 length;
attrs->GetLength(&length);
nsCOMPtr<nsIDOMNode> attrDOMNode;
for (PRUint32 i = 0; i < length; ++i) {
attrs->Item(i, getter_AddRefs(attrDOMNode));
NS_ENSURE_STATE(attrDOMNode);
nsCOMPtr<nsIAttribute> attr = do_QueryInterface(attrDOMNode);
NS_ENSURE_STATE(attr);
void *uploadFileProperty =
attr->GetProperty(nsXFormsAtoms::uploadFileProperty);
if (!uploadFileProperty) {
continue;
}
nsIFile *file = static_cast<nsIFile *>(uploadFileProperty);
nsCString cid;
cid.AssignLiteral("cid:");
MakeMultipartContentID(cid);
rv = attrDOMNode->SetNodeValue(NS_ConvertUTF8toUTF16(cid));
NS_ENSURE_SUCCESS(rv, rv);
aAttachments->Append(file, cid);
}
}
}
nsCOMPtr<nsIDOMNode> child;
currentNode->GetFirstChild(getter_AddRefs(child));
if (child) {
rv = CreateAttachments(aModel, child, aAttachments);
NS_ENSURE_SUCCESS(rv, rv);
}
nsCOMPtr<nsIDOMNode> node;
currentNode->GetNextSibling(getter_AddRefs(node));
currentNode.swap(node);
}
return NS_OK;
}
static void
ReleaseObject(void *aObject,
nsIAtom *aPropertyName,
void *aPropertyValue,
void *aData)
{
static_cast<nsISupports *>(aPropertyValue)->Release();
}
nsresult
nsXFormsSubmissionElement::CopyChildren(nsIModelElementPrivate *aModel,
nsIDOMNode *aSource,
nsIDOMNode *aDest,
nsIDOMDocument *aDestDoc,
const nsString &aCDATAElements,
PRUint32 aDepth)
{
PRBool validate = GetBooleanAttr(NS_LITERAL_STRING("validate"), PR_TRUE);
nsCOMPtr<nsIDOMNode> currentNode(aSource), node, destChild;
while (currentNode) {
// XXX importing the entire node is not quite right here... we also have
// to iterate over the attributes since the attributes could somehow
// (remains to be determined) reference external entities.
aDestDoc->ImportNode(currentNode, PR_FALSE, getter_AddRefs(destChild));
NS_ENSURE_STATE(destChild);
PRUint16 type;
destChild->GetNodeType(&type);
switch (type) {
case nsIDOMNode::PROCESSING_INSTRUCTION_NODE: {
nsCOMPtr<nsIDOMProcessingInstruction> pi = do_QueryInterface(destChild);
NS_ENSURE_STATE(pi);
// ignore "<?xml ... ?>" since we would have already inserted this.
// XXXbeaufour: depends on omit-xml-decl, does it not?
nsAutoString target;
pi->GetTarget(target);
if (!target.EqualsLiteral("xml"))
aDest->AppendChild(destChild, getter_AddRefs(node));
break;
}
case nsIDOMNode::TEXT_NODE: {
// honor cdata-section-elements (see xslt spec section 16.1)
if (aCDATAElements.IsEmpty()) {
aDest->AppendChild(destChild, getter_AddRefs(node));
} else {
currentNode->GetParentNode(getter_AddRefs(node));
NS_ENSURE_STATE(node);
nsAutoString name;
node->GetNodeName(name);
// check to see if name is mentioned on cdataElements
if (HasToken(aCDATAElements, name)) {
nsCOMPtr<nsIDOMText> textNode = do_QueryInterface(destChild);
NS_ENSURE_STATE(textNode);
nsAutoString textData;
textNode->GetData(textData);
nsCOMPtr<nsIDOMCDATASection> cdataNode;
aDestDoc->CreateCDATASection(textData, getter_AddRefs(cdataNode));
aDest->AppendChild(cdataNode, getter_AddRefs(node));
} else {
aDest->AppendChild(destChild, getter_AddRefs(node));
}
}
break;
}
default: {
PRUint16 handleNodeResult;
aModel->HandleInstanceDataNode(currentNode, &handleNodeResult);
/*
* SUBMIT_SERIALIZE_NODE - node is to be serialized
* SUBMIT_SKIP_NODE - node is not to be serialized
* SUBMIT_ABORT_SUBMISSION - abort submission (invalid node or empty required node)
*/
if (handleNodeResult == nsIModelElementPrivate::SUBMIT_SKIP_NODE) {
// skip node and subtree
currentNode->GetNextSibling(getter_AddRefs(node));
currentNode.swap(node);
continue;
} else if (validate &&
handleNodeResult ==
nsIModelElementPrivate::SUBMIT_ABORT_SUBMISSION) {
// If node is invalid or empty required, then only fail if
// @validate attribute is false
// abort
nsXFormsUtils::ReportError(NS_LITERAL_STRING("warnSubmitInvalidNode"),
currentNode, nsIScriptError::warningFlag);
return NS_ERROR_ILLEGAL_VALUE;
}
// ImportNode does not copy any properties of the currentNode. If the
// node has an uploadFileProperty we need to copy it to the submission
// document so that local files will be attached properly when the
// submission format is multipart-related.
aDest->AppendChild(destChild, getter_AddRefs(node));
// If this node has attributes, make sure that we don't copy any
// that aren't relevant, etc.
PRBool hasAttrs = PR_FALSE;
currentNode->HasAttributes(&hasAttrs);
if ((type == nsIDOMNode::ELEMENT_NODE) && hasAttrs) {
nsCOMPtr<nsIDOMNamedNodeMap> attrMap;
nsCOMPtr<nsIDOMNode> attrDOMNode, tempNode;
currentNode->GetAttributes(getter_AddRefs(attrMap));
NS_ENSURE_STATE(attrMap);
nsresult rv = NS_OK;
PRUint32 length;
nsCOMPtr<nsIDOMElement> destElem(do_QueryInterface(node));
attrMap->GetLength(&length);
for (PRUint32 run = 0; run < length; ++run) {
attrMap->Item(run, getter_AddRefs(attrDOMNode));
NS_ENSURE_STATE(attrDOMNode);
aModel->HandleInstanceDataNode(attrDOMNode, &handleNodeResult);
if (handleNodeResult ==
nsIModelElementPrivate::SUBMIT_ABORT_SUBMISSION) {
// abort
nsXFormsUtils::ReportError(NS_LITERAL_STRING("warnSubmitInvalidNode"),
currentNode, nsIScriptError::warningFlag);
return NS_ERROR_ILLEGAL_VALUE;
}
nsAutoString localName, namespaceURI;
rv = attrDOMNode->GetLocalName(localName);
NS_ENSURE_SUCCESS(rv, rv);
rv = attrDOMNode->GetNamespaceURI(namespaceURI);
NS_ENSURE_SUCCESS(rv, rv);
if (handleNodeResult == nsIModelElementPrivate::SUBMIT_SKIP_NODE) {
rv = destElem->RemoveAttributeNS(namespaceURI, localName);
NS_ENSURE_SUCCESS(rv, rv);
} else {
// the cloning does not copy any properties of the currentNode. If
// the attribute node has an uploadFileProperty we need to copy it
// to the submission document so that local files will be attached
// properly when the submission format is multipart-related.
void* uploadFileProperty = nsnull;
nsCOMPtr<nsIAttribute> attrNode(do_QueryInterface(attrDOMNode));
if (attrNode) {
uploadFileProperty =
attrNode->GetProperty(nsXFormsAtoms::uploadFileProperty);
if (uploadFileProperty) {
nsCOMPtr<nsIDOMAttr> destDOMAttr;
rv = destElem->GetAttributeNodeNS(
namespaceURI, localName, getter_AddRefs(destDOMAttr));
NS_ENSURE_SUCCESS(rv, rv);
nsCOMPtr<nsIAttribute> destAttribute(
do_QueryInterface(destDOMAttr));
if (destAttribute) {
// Clone the local file so the same pointer isn't released
// twice
nsIFile *file =
static_cast<nsIFile *>(uploadFileProperty);
nsIFile *fileCopy = nsnull;
nsresult rv = file->Clone(&fileCopy);
NS_ENSURE_SUCCESS(rv, rv);
destAttribute->SetProperty(
nsXFormsAtoms::uploadFileProperty, fileCopy,
ReleaseObject);
}
}
}
}
}
}
void* uploadFileProperty = nsnull;
nsCOMPtr<nsIContent> currentNodeContent(do_QueryInterface(currentNode));
if (currentNodeContent) {
uploadFileProperty =
currentNodeContent->GetProperty(nsXFormsAtoms::uploadFileProperty);
if (uploadFileProperty) {
nsCOMPtr<nsIContent> destChildContent(do_QueryInterface(node));
if (destChildContent) {
// Clone the local file so the same pointer isn't released twice.
nsIFile *file = static_cast<nsIFile *>(uploadFileProperty);
nsIFile *fileCopy = nsnull;
nsresult rv = file->Clone(&fileCopy);
NS_ENSURE_SUCCESS(rv, rv);
destChildContent->SetProperty(nsXFormsAtoms::uploadFileProperty,
fileCopy,
ReleaseObject);
}
}
}
// recurse
nsCOMPtr<nsIDOMNode> startNode;
currentNode->GetFirstChild(getter_AddRefs(startNode));
nsresult rv = CopyChildren(aModel, startNode, destChild, aDestDoc,
aCDATAElements, aDepth + 1);
NS_ENSURE_SUCCESS(rv, rv);
}
}
if (!aDepth) {
break;
}
currentNode->GetNextSibling(getter_AddRefs(node));
currentNode.swap(node);
}
return NS_OK;
}
nsresult
nsXFormsSubmissionElement::SerializeDataURLEncoded(nsIDOMDocument *data,
nsCString &uri,
nsIInputStream **stream,
nsCString &contentType)
{
// 'get' method:
// The URI is constructed as follows:
// o The submit URI from the action attribute is examined. If it does not
// already contain a ? (question mark) character, one is appended. If it
// does already contain a question mark character, then a separator
// character from the attribute separator is appended.
// o The serialized form data is appended to the URI.
nsCAutoString separator;
{
nsAutoString temp;
mElement->GetAttribute(NS_LITERAL_STRING("separator"), temp);
if (temp.IsEmpty())
{
separator.AssignLiteral(";");
}
else
{
// Separator per spec can only be |;| or |&|
if (!temp.EqualsLiteral(";") && !temp.EqualsLiteral("&")) {
// invalid separator, report the error and abort submission.
// XXX: we probably should add a visual indicator
const PRUnichar *strings[] = { temp.get() };
nsXFormsUtils::ReportError(NS_LITERAL_STRING("invalidSeparator"),
strings, 1, mElement, mElement);
return NS_ERROR_ILLEGAL_VALUE;
} else {
CopyUTF16toUTF8(temp, separator);
}
}
}
if (mFormat & METHOD_GET)
{
if (uri.FindChar('?') == kNotFound)
uri.Append('?');
else
uri.Append(separator);
AppendURLEncodedData(data, separator, uri);
*stream = nsnull;
contentType.Truncate();
}
else if (mFormat & METHOD_POST)
{
nsCAutoString buf;
AppendURLEncodedData(data, separator, buf);
// make new stream
NS_NewCStringInputStream(stream, buf);
NS_ENSURE_STATE(*stream);
contentType.AssignLiteral("application/x-www-form-urlencoded");
}
else
{
NS_WARNING("unexpected submission format");
return NS_ERROR_UNEXPECTED;
}
// For HTML 4 compatibility sake, trailing separator is to be removed per an
// upcoming erratum.
if (StringEndsWith(uri, separator))
uri.Cut(uri.Length() - 1, 1);
return NS_OK;
}
void
nsXFormsSubmissionElement::AppendURLEncodedData(nsIDOMNode *data,
const nsCString &separator,
nsCString &buf)
{
// 1. Each element node is visited in document order. Each element that has
// one text node child is selected for inclusion.
// 2. Element nodes selected for inclusion are encoded as EltName=value{sep},
// where = is a literal character, {sep} is the separator character from the
// separator attribute on submission, EltName represents the element local
// name, and value represents the contents of the text node.
// NOTE:
// The encoding of EltName and value are as follows: space characters are
// replaced by +, and then non-ASCII and reserved characters (as defined
// by [RFC 2396] as amended by subsequent documents in the IETF track) are
// escaped by replacing the character with one or more octets of the UTF-8
// representation of the character, with each octet in turn replaced by
// %HH, where HH represents the uppercase hexadecimal notation for the
// octet value and % is a literal character. Line breaks are represented
// as "CR LF" pairs (i.e., %0D%0A).
#ifdef DEBUG_darinf
nsAutoString nodeName;
data->GetNodeName(nodeName);
LOG(("+++ AppendURLEncodedData: inspecting <%s>\n",
NS_ConvertUTF16toUTF8(nodeName).get()));
#endif
nsCOMPtr<nsIDOMNode> child;
data->GetFirstChild(getter_AddRefs(child));
if (!child)
return;
PRUint16 childType;
child->GetNodeType(&childType);
nsCOMPtr<nsIDOMNode> sibling;
child->GetNextSibling(getter_AddRefs(sibling));
if (!sibling && childType == nsIDOMNode::TEXT_NODE)
{
nsAutoString localName;
data->GetLocalName(localName);
nsAutoString value;
child->GetNodeValue(value);
LOG((" appending data for <%s>\n", NS_ConvertUTF16toUTF8(localName).get()));
nsCString encLocalName, encValue;
URLEncode(localName, encLocalName);
URLEncode(value, encValue);
buf.Append(encLocalName + NS_LITERAL_CSTRING("=") + encValue + separator);
}
else
{
// call AppendURLEncodedData on each child node
do
{
AppendURLEncodedData(child, separator, buf);
child->GetNextSibling(getter_AddRefs(sibling));
child.swap(sibling);
}
while (child);
}
}
nsresult
nsXFormsSubmissionElement::SerializeDataMultipartRelated(nsIDOMDocument *data,
nsIInputStream **stream,
nsCString &contentType)
{
NS_ASSERTION(mFormat & METHOD_POST, "unexpected submission method");
nsCAutoString boundary;
MakeMultipartBoundary(boundary);
nsCOMPtr<nsIMultiplexInputStream> multiStream =
do_CreateInstance("@mozilla.org/io/multiplex-input-stream;1");
NS_ENSURE_STATE(multiStream);
nsCAutoString type, start;
MakeMultipartContentID(start);
nsresult rv;
nsCOMPtr<nsIModelElementPrivate> model(GetModel());
NS_ENSURE_STATE(model);
SubmissionAttachmentArray attachments;
rv = CreateAttachments(model, data, &attachments);
NS_ENSURE_SUCCESS(rv, rv);
nsCOMPtr<nsIInputStream> xml;
rv = SerializeDataXML(data, getter_AddRefs(xml), type);
NS_ENSURE_SUCCESS(rv, rv);
// XXX we should output a 'charset=' with the 'Content-Type' header
nsCString postDataChunk;
postDataChunk += NS_LITERAL_CSTRING("--") + boundary
+ NS_LITERAL_CSTRING("\r\nContent-Type: ") + type
+ NS_LITERAL_CSTRING("\r\nContent-ID: <") + start
+ NS_LITERAL_CSTRING(">\r\n\r\n");
rv = AppendPostDataChunk(postDataChunk, multiStream);
NS_ENSURE_SUCCESS(rv, rv);
multiStream->AppendStream(xml);
for (PRUint32 i = 0; i < attachments.Count(); ++i) {
SubmissionAttachment *a = attachments.Item(i);
nsCOMPtr<nsIInputStream> fileStream;
nsCAutoString type;
// If the file upload control did not set a file to upload, then
// we'll upload as if the file selected is empty.
if (a->file)
{
NS_NewLocalFileInputStream(getter_AddRefs(fileStream), a->file);
NS_ENSURE_SUCCESS(rv, rv);
GetMimeTypeFromFile(a->file, type);
}
else
{
type.AssignLiteral("application/octet-stream");
}
postDataChunk += NS_LITERAL_CSTRING("\r\n--") + boundary
+ NS_LITERAL_CSTRING("\r\nContent-Type: ") + type
+ NS_LITERAL_CSTRING("\r\nContent-Transfer-Encoding: binary")
+ NS_LITERAL_CSTRING("\r\nContent-ID: <") + a->cid
+ NS_LITERAL_CSTRING(">\r\n\r\n");
rv = AppendPostDataChunk(postDataChunk, multiStream);
NS_ENSURE_SUCCESS(rv, rv);
if (fileStream)
multiStream->AppendStream(fileStream);
}
// final boundary
postDataChunk += NS_LITERAL_CSTRING("\r\n--") + boundary
+ NS_LITERAL_CSTRING("--\r\n");
rv = AppendPostDataChunk(postDataChunk, multiStream);
NS_ENSURE_SUCCESS(rv, rv);
contentType =
NS_LITERAL_CSTRING("multipart/related; boundary=") + boundary +
NS_LITERAL_CSTRING("; type=\"") + type +
NS_LITERAL_CSTRING("\"; start=\"<") + start +
NS_LITERAL_CSTRING(">\"");
NS_ADDREF(*stream = multiStream);
return NS_OK;
}
nsresult
nsXFormsSubmissionElement::SerializeDataMultipartFormData(nsIDOMDocument *data,
nsIInputStream **stream,
nsCString &contentType)
{
NS_ASSERTION(mFormat & METHOD_POST, "unexpected submission method");
// This format follows the rules for multipart/form-data MIME data streams in
// [RFC 2388], with specific requirements of this serialization listed below:
// o Each element node is visited in document order.
// o Each element that has exactly one text node child is selected for
// inclusion.
// o Element nodes selected for inclusion are as encoded as
// Content-Disposition: form-data MIME parts as defined in [RFC 2387], with
// the name parameter being the element local name.
// o Element nodes of any datatype populated by upload are serialized as the
// specified content and additionally have a Content-Disposition filename
// parameter, if available.
// o The Content-Type must be text/plain except for xsd:base64Binary,
// xsd:hexBinary, and derived types, in which case the header represents the
// media type of the attachment if known, otherwise
// application/octet-stream. If a character set is applicable, the
// Content-Type may have a charset parameter.
nsCAutoString boundary;
MakeMultipartBoundary(boundary);
nsCOMPtr<nsIMultiplexInputStream> multiStream =
do_CreateInstance("@mozilla.org/io/multiplex-input-stream;1");
NS_ENSURE_STATE(multiStream);
nsCString postDataChunk;
nsresult rv = AppendMultipartFormData(data, boundary, postDataChunk, multiStream);
NS_ENSURE_SUCCESS(rv, rv);
postDataChunk += NS_LITERAL_CSTRING("--") + boundary
+ NS_LITERAL_CSTRING("--\r\n\r\n");
rv = AppendPostDataChunk(postDataChunk, multiStream);
NS_ENSURE_SUCCESS(rv, rv);
contentType = NS_LITERAL_CSTRING("multipart/form-data; boundary=") + boundary;
NS_ADDREF(*stream = multiStream);
return NS_OK;
}
nsresult
nsXFormsSubmissionElement::AppendMultipartFormData(nsIDOMNode *data,
const nsCString &boundary,
nsCString &postDataChunk,
nsIMultiplexInputStream *multiStream)
{
#ifdef DEBUG_darinf
nsAutoString nodeName;
data->GetNodeName(nodeName);
LOG(("+++ AppendMultipartFormData: inspecting <%s>\n",
NS_ConvertUTF16toUTF8(nodeName).get()));
#endif
nsresult rv;
nsCOMPtr<nsIDOMNode> child;
data->GetFirstChild(getter_AddRefs(child));
if (!child)
return NS_OK;
PRUint16 childType;
child->GetNodeType(&childType);
nsCOMPtr<nsIDOMNode> sibling;
child->GetNextSibling(getter_AddRefs(sibling));
if (!sibling && childType == nsIDOMNode::TEXT_NODE)
{
nsAutoString localName;
data->GetLocalName(localName);
nsAutoString value;
child->GetNodeValue(value);
LOG((" appending data for <%s>\n", NS_ConvertUTF16toUTF8(localName).get()));
PRUint32 encType;
rv = GetElementEncodingType(data, &encType);
NS_ENSURE_SUCCESS(rv, rv);
NS_ConvertUTF16toUTF8 encName(localName);
encName.Adopt(nsLinebreakConverter::ConvertLineBreaks(encName.get(),
nsLinebreakConverter::eLinebreakAny,
nsLinebreakConverter::eLinebreakNet));
postDataChunk += NS_LITERAL_CSTRING("--") + boundary
+ NS_LITERAL_CSTRING("\r\nContent-Disposition: form-data; name=\"")
+ encName + NS_LITERAL_CSTRING("\"");
nsCAutoString contentType;
nsCOMPtr<nsIInputStream> fileStream;
if (encType == ELEMENT_ENCTYPE_URI)
{
void* uploadFileProperty = nsnull;
nsCOMPtr<nsIContent> content = do_QueryInterface(data);
if (content) {
uploadFileProperty =
content->GetProperty(nsXFormsAtoms::uploadFileProperty);
} else {
nsCOMPtr<nsIAttribute> attr = do_QueryInterface(data);
NS_ENSURE_STATE(attr);
uploadFileProperty =
attr->GetProperty(nsXFormsAtoms::uploadFileProperty);
}
nsIFile *file = static_cast<nsIFile *>(uploadFileProperty);
nsAutoString leafName;
if (file)
{
NS_NewLocalFileInputStream(getter_AddRefs(fileStream), file);
file->GetLeafName(leafName);
// use mime service to get content-type
GetMimeTypeFromFile(file, contentType);
}
else
{
contentType.AssignLiteral("application/octet-stream");
}
postDataChunk += NS_LITERAL_CSTRING("; filename=\"")
+ NS_ConvertUTF16toUTF8(leafName)
+ NS_LITERAL_CSTRING("\"");
}
else if (encType == ELEMENT_ENCTYPE_STRING)
{
contentType.AssignLiteral("text/plain; charset=UTF-8");
}
else
{
contentType.AssignLiteral("application/octet-stream");
}
postDataChunk += NS_LITERAL_CSTRING("\r\nContent-Type: ")
+ contentType
+ NS_LITERAL_CSTRING("\r\n\r\n");
if (encType == ELEMENT_ENCTYPE_URI)
{
AppendPostDataChunk(postDataChunk, multiStream);
if (fileStream)
multiStream->AppendStream(fileStream);
postDataChunk += NS_LITERAL_CSTRING("\r\n");
}
else
{
// for base64Binary and hexBinary types, we assume that the data is
// already encoded. this assumption is based on section 8.1.6 of the
// xforms spec.
// XXX UTF-8 ok?
NS_ConvertUTF16toUTF8 encValue(value);
encValue.Adopt(nsLinebreakConverter::ConvertLineBreaks(encValue.get(),
nsLinebreakConverter::eLinebreakAny,
nsLinebreakConverter::eLinebreakNet));
postDataChunk += encValue + NS_LITERAL_CSTRING("\r\n");
}
}
else
{
// call AppendMultipartFormData on each child node
do
{
rv = AppendMultipartFormData(child, boundary, postDataChunk, multiStream);
if (NS_FAILED(rv))
return rv;
child->GetNextSibling(getter_AddRefs(sibling));
child.swap(sibling);
}
while (child);
}
return NS_OK;
}
nsresult
nsXFormsSubmissionElement::AppendPostDataChunk(nsCString &postDataChunk,
nsIMultiplexInputStream *multiStream)
{
nsCOMPtr<nsIInputStream> stream;
NS_NewCStringInputStream(getter_AddRefs(stream), postDataChunk);
NS_ENSURE_TRUE(stream, NS_ERROR_OUT_OF_MEMORY);
multiStream->AppendStream(stream);
postDataChunk.Truncate();
return NS_OK;
}
nsresult
nsXFormsSubmissionElement::GetElementEncodingType(nsIDOMNode *node,
PRUint32 *encType,
nsIModelElementPrivate *aModel)
{
*encType = ELEMENT_ENCTYPE_STRING; // default
// check for 'xsd:base64Binary', 'xsd:hexBinary', or 'xsd:anyURI'
nsAutoString type, nsuri;
nsresult rv;
if (aModel) {
rv = aModel->GetTypeFromNode(node, type, nsuri);
} else {
rv = nsXFormsUtils::ParseTypeFromNode(node, type, nsuri);
}
if (NS_SUCCEEDED(rv) &&
nsuri.EqualsLiteral(NS_NAMESPACE_XML_SCHEMA) &&
!type.IsEmpty())
{
if (type.Equals(NS_LITERAL_STRING("anyURI")))
*encType = ELEMENT_ENCTYPE_URI;
else if (type.Equals(NS_LITERAL_STRING("base64Binary")))
*encType = ELEMENT_ENCTYPE_BASE64;
else if (type.Equals(NS_LITERAL_STRING("hexBinary")))
*encType = ELEMENT_ENCTYPE_HEX;
// XXX need to handle derived types (fixing bug 263384 will help)
}
return NS_OK;
}
nsresult
nsXFormsSubmissionElement::CreateFileStream(const nsString &absURI,
nsIFile **resultFile,
nsIInputStream **resultStream)
{
LOG(("nsXFormsSubmissionElement::CreateFileStream [%s]\n",
NS_ConvertUTF16toUTF8(absURI).get()));
nsCOMPtr<nsIURI> uri;
NS_NewURI(getter_AddRefs(uri), absURI);
NS_ENSURE_STATE(uri);
// restrict to file:// -- XXX is this correct?
PRBool schemeIsFile = PR_FALSE;
uri->SchemeIs("file", &schemeIsFile);
NS_ENSURE_STATE(schemeIsFile);
// NOTE: QI to nsIFileURL just means that the URL corresponds to a
// local file resource, which is not restricted to file://
nsCOMPtr<nsIFileURL> fileURL = do_QueryInterface(uri);
NS_ENSURE_STATE(fileURL);
fileURL->GetFile(resultFile);
NS_ENSURE_STATE(*resultFile);
return NS_NewLocalFileInputStream(resultStream, *resultFile);
}
nsresult
nsXFormsSubmissionElement::SendData(const nsCString &uriSpec,
nsIInputStream *stream,
const nsCString &contentType)
{
LOG(("+++ sending to uri=%s [stream=%p]\n", uriSpec.get(), (void*) stream));
nsCOMPtr<nsIDOMDocument> domDoc;
mElement->GetOwnerDocument(getter_AddRefs(domDoc));
nsCOMPtr<nsIDocument> doc = do_QueryInterface(domDoc);
NS_ENSURE_STATE(doc);
nsCOMPtr<nsIIOService> ios = do_GetIOService();
NS_ENSURE_STATE(ios);
nsCOMPtr<nsIURI> currURI = doc->GetDocumentURI();
// Any parameters appended to uriSpec are already ASCII-encoded per the rules
// of section 11.6. Use our standard document charset based canonicalization
// for any other non-ASCII bytes. (This might be important for compatibility
// with legacy CGI processors.)
nsCOMPtr<nsIURI> uri;
ios->NewURI(uriSpec,
doc->GetDocumentCharacterSet().get(),
currURI,
getter_AddRefs(uri));
NS_ENSURE_STATE(uri);
nsresult rv;
// handle mailto: submission
if (!mIsReplaceInstance) {
PRBool isMailto;
rv = uri->SchemeIs("mailto", &isMailto);
NS_ENSURE_SUCCESS(rv, rv);
if (isMailto) {
nsCOMPtr<nsIExternalProtocolService> extProtService =
do_GetService("@mozilla.org/uriloader/external-protocol-service;1");
NS_ENSURE_STATE(extProtService);
PRBool hasExposedMailClient;
rv = extProtService->ExternalProtocolHandlerExists("mailto",
&hasExposedMailClient);
NS_ENSURE_SUCCESS(rv, rv);
if (hasExposedMailClient) {
nsCAutoString mailtoUrl(uriSpec);
// A mailto url looks like this: mailto:foo@bar.com, which can be followed
// by parameters (subject and body). The first parameter has to have an
// "?" before it, and an additional one needs to have an "&".
// So if "?" already exists in the string, we use "&".
if (mailtoUrl.Find("&body=") != kNotFound ||
mailtoUrl.Find("?body=") != kNotFound) {
// body parameter already exists, so report a warning
nsXFormsUtils::ReportError(NS_LITERAL_STRING("warnMailtoBodyParam"),
mElement, nsIScriptError::warningFlag);
}
if (mailtoUrl.FindChar('?') != kNotFound)
mailtoUrl.AppendLiteral("&body=");
else
mailtoUrl.AppendLiteral("?body=");
// get the stream contents
PRUint32 len, read, numReadIn = 1;
rv = stream->Available(&len);
NS_ENSURE_SUCCESS(rv, rv);
char *buf = new char[len+1];
if (buf == NULL) {
return NS_ERROR_OUT_OF_MEMORY;
}
memset(buf, 0, len+1);
// Read returns 0 if eos
while (numReadIn != 0) {
numReadIn = stream->Read(buf, len, &read);
NS_EscapeURL(buf, read, esc_Query|esc_AlwaysCopy, mailtoUrl);
}
delete [] buf;
// create an nsIUri out of the string
nsCOMPtr<nsIURI> mailUri;
ios->NewURI(mailtoUrl,
nsnull,
nsnull,
getter_AddRefs(mailUri));
NS_ENSURE_STATE(mailUri);
// let the OS handle the uri
rv = extProtService->LoadURI(mailUri, nsnull);
if (NS_FAILED(rv)) {
// opening an mail client failed.
nsXFormsUtils::ReportError(NS_LITERAL_STRING("submitMailtoFailed"),
mElement);
EndSubmit(PR_FALSE);
} else {
// the protocol service succeeded
EndSubmit(PR_TRUE);
}
} else {
// no system mail client found
nsXFormsUtils::ReportError(NS_LITERAL_STRING("submitMailtoInit"),
mElement);
EndSubmit(PR_FALSE);
}
return NS_OK;
}
}
if (!CheckSameOrigin(doc, uri)) {
nsXFormsUtils::ReportError(NS_LITERAL_STRING("submitSendOrigin"),
mElement);
return NS_ERROR_ABORT;
}
nsCOMPtr<nsIChannel> channel;
ios->NewChannelFromURI(uri, getter_AddRefs(channel));
NS_ENSURE_STATE(channel);
PRBool ignoreStream = PR_FALSE;
nsCOMPtr<nsIHttpChannel> httpChannel(do_QueryInterface(channel));
if (httpChannel) {
httpChannel->SetReferrer(currURI);
}
if (mFormat & METHOD_POST) {
if (!httpChannel) {
// The spec doesn't really say how to handle post with anything other
// than http. So we are free to make up our own rules.
// The only other protocols we quasi support are file and mailto. Mailto
// has already been handled by this point. For file we'll still do the
// post, but we won't bother to 'send any data' since that really has
// no meaning. This will cause Mozilla to get the local file.
// Since this is a kludgy kind of behavior to begin with (the user
// really shouldn't use POST with file:/// to begin with) we'll
// behave like formsPlayer and only allow this for replace="all" and
// replace="none". If replace="instance", we'll throw an
// xforms-submit-error. Again, this is for compliance with formsPlayer.
// A good form author should never cause us to reach here!
nsCAutoString scheme;
rv = uri->GetScheme(scheme);
NS_ENSURE_SUCCESS(rv, rv);
PRBool allowSubmission = scheme.EqualsLiteral("file");
if (allowSubmission) {
if (!mIsReplaceInstance) {
ignoreStream = PR_TRUE;
} else {
allowSubmission = PR_FALSE;
}
}
if (!allowSubmission) {
nsAutoString schemeTemp = NS_ConvertASCIItoUTF16(scheme);
const PRUnichar *strings[] = { schemeTemp.get() };
nsXFormsUtils::ReportError(NS_LITERAL_STRING("warnSubmitProtocolPost"),
strings, 1, mElement, mElement,
nsIScriptError::warningFlag);
return NS_ERROR_UNEXPECTED;
}
}
}
// wrap the entire upload stream in a buffered input stream, so that
// it can be read in large chunks.
// XXX necko should probably do this (or something like this) for us.
nsCOMPtr<nsIInputStream> bufferedStream;
if (stream && !ignoreStream)
{
NS_NewBufferedInputStream(getter_AddRefs(bufferedStream), stream, 4096);
NS_ENSURE_STATE(bufferedStream);
nsCOMPtr<nsIUploadChannel> uploadChannel = do_QueryInterface(channel);
NS_ENSURE_STATE(uploadChannel);
// this in effect sets the request method of the channel to 'PUT'
rv = uploadChannel->SetUploadStream(bufferedStream, contentType, -1);
NS_ENSURE_SUCCESS(rv, rv);
}
if (mFormat & METHOD_POST && httpChannel) {
// In this case we want to set the request header to have the method of
// 'post'. We need to leave this code after the call to SetUploadStream
// since that will blindly overwrite the request header with a method of
// 'put'
rv = httpChannel->SetRequestMethod(NS_LITERAL_CSTRING("POST"));
NS_ENSURE_SUCCESS(rv, rv);
if (mIsSOAPRequest) {
nsCOMPtr<nsIMIMEHeaderParam> mimeHdrParser =
do_GetService("@mozilla.org/network/mime-hdrparam;1");
NS_ENSURE_STATE(mimeHdrParser);
nsAutoString mediatype, action;
mElement->GetAttribute(NS_LITERAL_STRING("mediatype"),
mediatype);
if (!mediatype.IsEmpty()) {
rv = mimeHdrParser->GetParameter(NS_ConvertUTF16toUTF8(mediatype),
"action", EmptyCString(), PR_FALSE,
nsnull, action);
}
if (action.IsEmpty()) {
action.AssignLiteral(" ");
}
rv = httpChannel->SetRequestHeader(NS_LITERAL_CSTRING("SOAPAction"),
NS_ConvertUTF16toUTF8(action),
PR_FALSE);
NS_ENSURE_SUCCESS(rv, rv);
}
}
// set loadGroup and notificationCallbacks
nsCOMPtr<nsILoadGroup> loadGroup = doc->GetDocumentLoadGroup();
channel->SetLoadGroup(loadGroup);
// set LOAD_DOCUMENT_URI so throbber works during submit
nsLoadFlags loadFlags = 0;
channel->GetLoadFlags(&loadFlags);
loadFlags |= nsIChannel::LOAD_DOCUMENT_URI;
channel->SetLoadFlags(loadFlags);
// create a pipe in which to store the response (yeah, this kind of
// sucks since we'll use a lot of memory if the response is large).
//
// pipe uses non-blocking i/o since we are just using it for temporary
// storage.
//
// pipe's maximum size is unlimited (gasp!)
nsCOMPtr<nsIOutputStream> pipeOut;
rv = NS_NewPipe(getter_AddRefs(mPipeIn), getter_AddRefs(pipeOut),
4096, PR_UINT32_MAX, PR_TRUE, PR_TRUE);
NS_ENSURE_SUCCESS(rv, rv);
// use a simple stream listener to tee our data into the pipe, and
// notify us when the channel starts and stops.
nsCOMPtr<nsIStreamListener> listener;
rv = NS_NewSimpleStreamListener(getter_AddRefs(listener), pipeOut, this);
NS_ENSURE_SUCCESS(rv, rv);
channel->SetNotificationCallbacks(this);
rv = channel->AsyncOpen(listener, nsnull);
NS_ENSURE_SUCCESS(rv, rv);
return rv;
}
// factory constructor
nsresult
NS_NewXFormsSubmissionElement(nsIXTFElement **aResult)
{
*aResult = new nsXFormsSubmissionElement();
if (!*aResult)
return NS_ERROR_OUT_OF_MEMORY;
NS_ADDREF(*aResult);
return NS_OK;
}