mozilla
/
pjs
зеркало из https://github.com/mozilla/pjs.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
pjs/string/obsolete/bufferRoutines.h

1010 строки
33 KiB
C++
Исходник Ответственный История

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: NPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Netscape Public License
* Version 1.1 (the "License"); you may not use this file except in
* compliance with the License. You may obtain a copy of the License at
* http://www.mozilla.org/NPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is mozilla.org code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Pierre Phaneuf <pp@ludusdesign.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the NPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the NPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
/* bufferRoutines.h --- rickg's original string manipulation underpinnings;
this code will be made obsolete by the new shared-buffer string (see bug #53065)
*/
#ifndef _BUFFERROUTINES_H
#define _BUFFERROUTINES_H
#ifndef nsStringDefines_h___
#include "nsStringDefines.h"
#endif
/******************************************************************************************
MODULE NOTES:
This file contains the workhorse copy and shift functions used in nsStrStruct.
Ultimately, I plan to make the function pointers in this system available for
use by external modules. They'll be able to install their own "handlers".
Not so, today though.
*******************************************************************************************/
#include "nsCRT.h"
#ifndef XPCOM_STANDALONE
#if !defined(RICKG_TESTBED) && !defined(STANDALONE_STRING_TESTS)
#include "nsUnicharUtilCIID.h"
#include "nsIServiceManager.h"
#include "nsICaseConversion.h"
#endif
#endif /* XPCOM_STANDALONE */
#define KSHIFTLEFT (0)
#define KSHIFTRIGHT (1)
// uncomment the following line to caught nsString char* casting problem
//#define DEBUG_ILLEGAL_CAST_UP
//#define DEBUG_ILLEGAL_CAST_DOWN
#if defined(DEBUG_ILLEGAL_CAST_UP) || defined(DEBUG_ILLEGAL_CAST_DOWN)
static PRBool track_illegal = PR_TRUE;
static PRBool track_latin1 = PR_TRUE;
#ifdef XP_UNIX
#include "nsTraceRefcnt.h"
class CTraceFile {
public:
CTraceFile() {
mFile = fopen("nsStringTrace.txt" , "a+");
}
~CTraceFile() {
fflush(mFile);
fclose(mFile);
}
void ReportCastUp(const char* data, const char* msg)
{
if(mFile) {
fprintf(mFile, "ERRORTEXT= %s\n", msg);
fprintf(mFile, "BEGINDATA\n");
const char* s=data;
while(*s) {
if(*s & 0x80) {
fprintf(mFile, "[%2X]", (char)*s);
} else {
fprintf(mFile, "%c", *s);
}
s++;
}
fprintf(mFile, "\n");
fprintf(mFile, "ENDDATA\n");
fprintf(mFile, "BEGINSTACK\n");
nsTraceRefcnt::WalkTheStack(mFile);
fprintf(mFile, "\n");
fprintf(mFile, "ENDSTACK\n");
fflush(mFile);
}
}
void ReportCastDown(const PRUnichar* data, const char* msg)
{
if(mFile) {
fprintf(mFile, "ERRORTEXT=%s\n", msg);
fprintf(mFile, "BEGINDATA\n");
const PRUnichar* s=data;
while(*s) {
if(*s & 0xFF80) {
fprintf(mFile, "\\u%X", *s);
} else {
fprintf(mFile, "%c", *s);
}
s++;
}
fprintf(mFile, "\n");
fprintf(mFile, "ENDDATA\n");
fprintf(mFile, "BEGINSTACK\n");
nsTraceRefcnt::WalkTheStack(mFile);
fprintf(mFile, "\n");
fprintf(mFile, "ENDSTACK\n");
fflush(mFile);
}
}
private:
FILE* mFile;
};
static CTraceFile gTrace;
#define TRACE_ILLEGAL_CAST_UP(c, s, m) if(!(c)) gTrace.ReportCastUp(s,m);
#define TRACE_ILLEGAL_CAST_DOWN(c, s, m) if(!(c)) gTrace.ReportCastDown(s,m);
#else // XP_UNIX
#define TRACE_ILLEGAL_CAST_UP(c, s, m) NS_ASSERTION((c), (m))
#define TRACE_ILLEGAL_CAST_DOWN(c, s, m) NS_ASSERTION((c), (m))
#endif //XP_UNIX
#endif
inline PRUnichar GetUnicharAt(const char* aString,PRUint32 anIndex) {
return ((PRUnichar*)aString)[anIndex];
}
inline PRUnichar GetCharAt(const char* aString,PRUint32 anIndex) {
return (PRUnichar)aString[anIndex];
}
//----------------------------------------------------------------------------------------
//
// This set of methods is used to shift the contents of a char buffer.
// The functions are differentiated by shift direction and the underlying charsize.
//
/**
* This method shifts single byte characters left by a given amount from an given offset.
* @update gess 01/04/99
* @param aDest is a ptr to a cstring where left-shift is to be performed
* @param aLength is the known length of aDest
* @param anOffset is the index into aDest where shifting shall begin
* @param aCount is the number of chars to be "cut"
*/
void ShiftCharsLeft(char* aDest,PRUint32 aLength,PRUint32 anOffset,PRUint32 aCount);
void ShiftCharsLeft(char* aDest,PRUint32 aLength,PRUint32 anOffset,PRUint32 aCount) {
char* dst = aDest+anOffset;
char* src = aDest+anOffset+aCount;
memmove(dst,src,aLength-(aCount+anOffset));
}
/**
* This method shifts single byte characters right by a given amount from an given offset.
* @update gess 01/04/99
* @param aDest is a ptr to a cstring where the shift is to be performed
* @param aLength is the known length of aDest
* @param anOffset is the index into aDest where shifting shall begin
* @param aCount is the number of chars to be "inserted"
*/
void ShiftCharsRight(char* aDest,PRUint32 aLength,PRUint32 anOffset,PRUint32 aCount);
void ShiftCharsRight(char* aDest,PRUint32 aLength,PRUint32 anOffset,PRUint32 aCount) {
char* src = aDest+anOffset;
char* dst = aDest+anOffset+aCount;
memmove(dst,src,aLength-anOffset);
}
/**
* This method shifts unicode characters by a given amount from an given offset.
* @update gess 01/04/99
* @param aDest is a ptr to a cstring where the shift is to be performed
* @param aLength is the known length of aDest
* @param anOffset is the index into aDest where shifting shall begin
* @param aCount is the number of chars to be "cut"
*/
void ShiftDoubleCharsLeft(char* aDest,PRUint32 aLength,PRUint32 anOffset,PRUint32 aCount);
void ShiftDoubleCharsLeft(char* aDest,PRUint32 aLength,PRUint32 anOffset,PRUint32 aCount) {
PRUnichar* root=(PRUnichar*)aDest;
PRUnichar* dst = root+anOffset;
PRUnichar* src = root+anOffset+aCount;
memmove(dst,src,(aLength-(aCount+anOffset))*sizeof(PRUnichar));
}
/**
* This method shifts unicode characters by a given amount from an given offset.
* @update gess 01/04/99
* @param aDest is a ptr to a cstring where the shift is to be performed
* @param aLength is the known length of aDest
* @param anOffset is the index into aDest where shifting shall begin
* @param aCount is the number of chars to be "inserted"
*/
void ShiftDoubleCharsRight(char* aDest,PRUint32 aLength,PRUint32 anOffset,PRUint32 aCount);
void ShiftDoubleCharsRight(char* aDest,PRUint32 aLength,PRUint32 anOffset,PRUint32 aCount) {
PRUnichar* root=(PRUnichar*)aDest;
PRUnichar* src = root+anOffset;
PRUnichar* dst = root+anOffset+aCount;
memmove(dst,src,sizeof(PRUnichar)*(aLength-anOffset));
}
typedef void (*ShiftChars)(char* aDest,PRUint32 aLength,PRUint32 anOffset,PRUint32 aCount);
ShiftChars gShiftChars[2][2]= {
{&ShiftCharsLeft,&ShiftCharsRight},
{&ShiftDoubleCharsLeft,&ShiftDoubleCharsRight}
};
//----------------------------------------------------------------------------------------
//
// This set of methods is used to copy one buffer onto another.
// The functions are differentiated by the size of source and dest character sizes.
// WARNING: Your destination buffer MUST be big enough to hold all the source bytes.
// We don't validate these ranges here (this should be done in higher level routines).
//
/**
* Going 1 to 1 is easy, since we assume ascii. No conversions are necessary.
* @update gess 01/04/99
* @param aDest is the destination buffer
* @param aDestOffset is the pos to start copy to in the dest buffer
* @param aSource is the source buffer
* @param anOffset is the offset to start copying from in the source buffer
* @param aCount is the (max) number of chars to copy
*/
void CopyChars1To1(char* aDest,PRInt32 anDestOffset,const char* aSource,PRUint32 anOffset,PRUint32 aCount);
void CopyChars1To1(char* aDest,PRInt32 anDestOffset,const char* aSource,PRUint32 anOffset,PRUint32 aCount) {
char* dst = aDest+anDestOffset;
char* src = (char*)aSource+anOffset;
memcpy(dst,src,aCount);
}
/**
* Going 1 to 2 requires a conversion from ascii to unicode. This can be expensive.
* @param aDest is the destination buffer
* @param aDestOffset is the pos to start copy to in the dest buffer
* @param aSource is the source buffer
* @param anOffset is the offset to start copying from in the source buffer
* @param aCount is the (max) number of chars to copy
*/
void CopyChars1To2(char* aDest,PRInt32 anDestOffset,const char* aSource,PRUint32 anOffset,PRUint32 aCount);
void CopyChars1To2(char* aDest,PRInt32 anDestOffset,const char* aSource,PRUint32 anOffset,PRUint32 aCount) {
PRUnichar* theDest=(PRUnichar*)aDest;
PRUnichar* to = theDest+anDestOffset;
const unsigned char* first= (const unsigned char*)aSource+anOffset;
const unsigned char* last = first+aCount;
#ifdef DEBUG_ILLEGAL_CAST_UP
PRBool illegal= PR_FALSE;
#endif
//now loop over characters, shifting them left...
while(first<last) {
*to=(PRUnichar)(*first);
#ifdef DEBUG_ILLEGAL_CAST_UP
if(track_illegal && track_latin1 && ((*to)& 0x80))
illegal= PR_TRUE;
#endif
to++;
first++;
}
#ifdef DEBUG_ILLEGAL_CAST_UP
TRACE_ILLEGAL_CAST_UP((!illegal), aSource, "illegal cast up in CopyChars1To2");
#endif
}
/**
* Going 2 to 1 requires a conversion from unicode down to ascii. This can be lossy.
* @update gess 01/04/99
* @param aDest is the destination buffer
* @param aDestOffset is the pos to start copy to in the dest buffer
* @param aSource is the source buffer
* @param anOffset is the offset to start copying from in the source buffer
* @param aCount is the (max) number of chars to copy
*/
void CopyChars2To1(char* aDest,PRInt32 anDestOffset,const char* aSource,PRUint32 anOffset,PRUint32 aCount);
void CopyChars2To1(char* aDest,PRInt32 anDestOffset,const char* aSource,PRUint32 anOffset,PRUint32 aCount) {
char* to = aDest+anDestOffset;
PRUnichar* theSource=(PRUnichar*)aSource;
const PRUnichar* first= theSource+anOffset;
const PRUnichar* last = first+aCount;
#ifdef DEBUG_ILLEGAL_CAST_DOWN
PRBool illegal= PR_FALSE;
#endif
//now loop over characters, shifting them left...
while(first<last) {
if(*first<256)
*to=(char)*first;
else {
*to='.';
NS_ASSERTION( (*first < 256), "data in U+0100-U+FFFF will be lost");
}
#ifdef DEBUG_ILLEGAL_CAST_DOWN
if(track_illegal) {
if(track_latin1) {
if(*first & 0xFF80)
illegal = PR_TRUE;
} else {
if(*first & 0xFF00)
illegal = PR_TRUE;
} // track_latin1
} // track_illegal
#endif
to++;
first++;
}
#ifdef DEBUG_ILLEGAL_CAST_DOWN
TRACE_ILLEGAL_CAST_DOWN((!illegal), theSource, "illegal cast down in CopyChars2To1");
#endif
}
/**
* Going 2 to 2 is fast and efficient.
* @update gess 01/04/99
* @param aDest is the destination buffer
* @param aDestOffset is the pos to start copy to in the dest buffer
* @param aSource is the source buffer
* @param anOffset is the offset to start copying from in the source buffer
* @param aCount is the (max) number of chars to copy
*/
void CopyChars2To2(char* aDest,PRInt32 anDestOffset,const char* aSource,PRUint32 anOffset,PRUint32 aCount);
void CopyChars2To2(char* aDest,PRInt32 anDestOffset,const char* aSource,PRUint32 anOffset,PRUint32 aCount) {
PRUnichar* theDest=(PRUnichar*)aDest;
PRUnichar* to = theDest+anDestOffset;
PRUnichar* theSource=(PRUnichar*)aSource;
PRUnichar* from= theSource+anOffset;
memcpy((void*)to,(void*)from,aCount*sizeof(PRUnichar));
}
//--------------------------------------------------------------------------------------
typedef void (*CopyChars)(char* aDest,PRInt32 anDestOffset,const char* aSource,PRUint32 anOffset,PRUint32 aCount);
CopyChars gCopyChars[2][2]={
{&CopyChars1To1,&CopyChars1To2},
{&CopyChars2To1,&CopyChars2To2}
};
//----------------------------------------------------------------------------------------
//
// This set of methods is used to search a buffer looking for a char.
//
/**
* This methods cans the given buffer for the given char
*
* @update gess 02/17/00
* @param aDest is the buffer to be searched
* @param aDestLength is the size (in char-units, not bytes) of the buffer
* @param anOffset is the start pos to begin searching
* @param aChar is the target character we're looking for
* @param aIgnorecase tells us whether to use a case sensitive search
* @param aCount tells us how many characters to iterate through (which may be different than aLength); -1 means use full length.
* @return index of pos if found, else -1 (kNotFound)
*/
inline PRInt32 FindChar1(const char* aDest,PRUint32 aDestLength,PRInt32 anOffset,const PRUnichar aChar,PRBool aIgnoreCase,PRInt32 aCount) {
if(anOffset<0)
anOffset=0;
if(aCount<0)
aCount = (PRInt32)aDestLength;
if((aChar<256) && (0<aDestLength) && ((PRUint32)anOffset<aDestLength)) {
//We'll only search if the given aChar is within the normal ascii a range,
//(Since this string is definitely within the ascii range).
if(0<aCount) {
const char* left= aDest+anOffset;
const char* last= left+aCount;
const char* max = aDest+aDestLength;
const char* end = (last<max) ? last : max;
if(aIgnoreCase) {
char theChar=(char)nsCRT::ToUpper(aChar);
while(left<end){
if(nsCRT::ToUpper(*left)==theChar)
return left-aDest;
++left;
}
}
else {
PRInt32 theMax = end-left;
if(0<theMax) {
unsigned char theChar = (unsigned char) aChar;
const char* result=(const char*)memchr(left, (int)theChar, theMax);
if(result) {
return result-aDest;
}
}
}
}
}
return kNotFound;
}
/**
* This methods cans the given buffer for the given char
*
* @update gess 3/25/98
* @param aDest is the buffer to be searched
* @param aDestLength is the size (in char-units, not bytes) of the buffer
* @param anOffset is the start pos to begin searching
* @param aChar is the target character we're looking for
* @param aIgnorecase tells us whether to use a case sensitive search
* @param aCount tells us how many characters to iterate through (which may be different than aLength); -1 means use full length.
* @return index of pos if found, else -1 (kNotFound)
*/
inline PRInt32 FindChar2(const char* aDest,PRUint32 aDestLength,PRInt32 anOffset,const PRUnichar aChar,PRBool aIgnoreCase,PRInt32 aCount) {
if(anOffset<0)
anOffset=0;
if(aCount<0)
aCount = (PRInt32)aDestLength;
if((0<aDestLength) && ((PRUint32)anOffset<aDestLength)) {
if(0<aCount) {
const PRUnichar* root = (PRUnichar*)aDest;
const PRUnichar* left = root+anOffset;
const PRUnichar* last = left+aCount;
const PRUnichar* max = root+aDestLength;
const PRUnichar* end = (last<max) ? last : max;
if(aIgnoreCase) {
PRUnichar theChar=nsCRT::ToUpper(aChar);
while(left<end){
if(nsCRT::ToUpper(*left)==theChar)
return left-root;
++left;
}
}
else {
while(left<end){
if(*left==aChar)
return (left-root);
++left;
}
}
}
}
return kNotFound;
}
/**
* This methods cans the given buffer (in reverse) for the given char
*
* @update gess 02/17/00
* @param aDest is the buffer to be searched
* @param aDestLength is the size (in char-units, not bytes) of the buffer
* @param anOffset is the start pos to begin searching
* @param aChar is the target character we're looking for
* @param aIgnorecase tells us whether to use a case sensitive search
* @param aCount tells us how many characters to iterate through (which may be different than aLength); -1 means use full length.
* @return index of pos if found, else -1 (kNotFound)
*/
inline PRInt32 RFindChar1(const char* aDest,PRUint32 aDestLength,PRInt32 anOffset,const PRUnichar aChar,PRBool aIgnoreCase,PRInt32 aCount) {
if(anOffset<0)
anOffset=(PRInt32)aDestLength-1;
if(aCount<0)
aCount = PRInt32(aDestLength);
if((aChar<256) && (0<aDestLength) && ((PRUint32)anOffset<aDestLength)) {
//We'll only search if the given aChar is within the normal ascii a range,
//(Since this string is definitely within the ascii range).
if(0<aCount) {
const char* rightmost = aDest+anOffset;
const char* min = rightmost-aCount+1;
const char* leftmost = (min<aDest) ? aDest: min;
if(aIgnoreCase) {
char theChar=(char)nsCRT::ToUpper(aChar);
while(leftmost<rightmost){
if(nsCRT::ToUpper(*rightmost)==theChar)
return rightmost-aDest;
--rightmost;
}
}
else {
char theChar=(char)aChar;
while(leftmost<=rightmost){
if((*rightmost)==theChar)
return rightmost-aDest;
--rightmost;
}
}
}
}
return kNotFound;
}
/**
* This methods cans the given buffer for the given char
*
* @update gess 3/25/98
* @param aDest is the buffer to be searched
* @param aDestLength is the size (in char-units, not bytes) of the buffer
* @param anOffset is the start pos to begin searching
* @param aChar is the target character we're looking for
* @param aIgnorecase tells us whether to use a case sensitive search
* @param aCount tells us how many characters to iterate through (which may be different than aLength); -1 means use full length.
* @return index of pos if found, else -1 (kNotFound)
*/
inline PRInt32 RFindChar2(const char* aDest,PRUint32 aDestLength,PRInt32 anOffset,const PRUnichar aChar,PRBool aIgnoreCase,PRInt32 aCount) {
if(anOffset<0)
anOffset=(PRInt32)aDestLength-1;
if(aCount<0)
aCount = PRInt32(aDestLength);
if((0<aDestLength) && ((PRUint32)anOffset<aDestLength)) {
if(0<aCount) {
const PRUnichar* root = (PRUnichar*)aDest;
const PRUnichar* rightmost = root+anOffset;
const PRUnichar* min = rightmost-aCount+1;
const PRUnichar* leftmost = (min<root) ? root: min;
if(aIgnoreCase) {
PRUnichar theChar=nsCRT::ToUpper(aChar);
while(leftmost<rightmost){
if(nsCRT::ToUpper(*rightmost)==theChar)
return rightmost-root;
--rightmost;
}
}
else {
while(leftmost<=rightmost){
if((*rightmost)==aChar)
return rightmost-root;
--rightmost;
}
}
}
}
return kNotFound;
}
typedef PRInt32 (*FindChars)(const char* aDest,PRUint32 aDestLength,PRInt32 anOffset,const PRUnichar aChar,PRBool aIgnoreCase,PRInt32 aCount);
FindChars gFindChars[]={&FindChar1,&FindChar2};
FindChars gRFindChars[]={&RFindChar1,&RFindChar2};
//----------------------------------------------------------------------------------------
//
// This set of methods is used to compare one buffer onto another.
// The functions are differentiated by the size of source and dest character sizes.
// WARNING: Your destination buffer MUST be big enough to hold all the source bytes.
// We don't validate these ranges here (this should be done in higher level routines).
//
/**
* This method compares the data in one buffer with another
* @update gess 01/04/99
* @param aStr1 is the first buffer to be compared
* @param aStr2 is the 2nd buffer to be compared
* @param aCount is the number of chars to compare
* @param aIgnorecase tells us whether to use a case-sensitive comparison
* @return -1,0,1 depending on <,==,>
*/
PRInt32 Compare1To1(const char* aStr1,const char* aStr2,PRUint32 aCount,PRBool aIgnoreCase);
PRInt32 Compare1To1(const char* aStr1,const char* aStr2,PRUint32 aCount,PRBool aIgnoreCase){
PRInt32 result=0;
if(aIgnoreCase)
result=nsCRT::strncasecmp(aStr1,aStr2,aCount);
else result=memcmp(aStr1,aStr2,aCount);
return result;
}
/**
* This method compares the data in one buffer with another
* @update gess 01/04/99
* @param aStr1 is the first buffer to be compared
* @param aStr2 is the 2nd buffer to be compared
* @param aCount is the number of chars to compare
* @param aIgnorecase tells us whether to use a case-sensitive comparison
* @return -1,0,1 depending on <,==,>
*/
PRInt32 Compare2To2(const char* aStr1,const char* aStr2,PRUint32 aCount,PRBool aIgnoreCase);
PRInt32 Compare2To2(const char* aStr1,const char* aStr2,PRUint32 aCount,PRBool aIgnoreCase){
PRInt32 result=0;
if(aIgnoreCase)
result=nsCRT::strncasecmp((PRUnichar*)aStr1,(PRUnichar*)aStr2,aCount);
else result=nsCRT::strncmp((PRUnichar*)aStr1,(PRUnichar*)aStr2,aCount);
return result;
}
/**
* This method compares the data in one buffer with another
* @update gess 01/04/99
* @param aStr1 is the first buffer to be compared
* @param aStr2 is the 2nd buffer to be compared
* @param aCount is the number of chars to compare
* @param aIgnorecase tells us whether to use a case-sensitive comparison
* @return -1,0,1 depending on <,==,>
*/
PRInt32 Compare2To1(const char* aStr1,const char* aStr2,PRUint32 aCount,PRBool aIgnoreCase);
PRInt32 Compare2To1(const char* aStr1,const char* aStr2,PRUint32 aCount,PRBool aIgnoreCase){
PRInt32 result;
if(aIgnoreCase)
result=nsCRT::strncasecmp((PRUnichar*)aStr1,aStr2,aCount);
else result=nsCRT::strncmp((PRUnichar*)aStr1,aStr2,aCount);
return result;
}
/**
* This method compares the data in one buffer with another
* @update gess 01/04/99
* @param aStr1 is the first buffer to be compared
* @param aStr2 is the 2nd buffer to be compared
* @param aCount is the number of chars to compare
* @param aIgnorecase tells us whether to use a case-sensitive comparison
* @return -1,0,1 depending on <,==,>
*/
PRInt32 Compare1To2(const char* aStr1,const char* aStr2,PRUint32 aCount,PRBool aIgnoreCase);
PRInt32 Compare1To2(const char* aStr1,const char* aStr2,PRUint32 aCount,PRBool aIgnoreCase){
PRInt32 result;
if(aIgnoreCase)
result=nsCRT::strncasecmp((PRUnichar*)aStr2,aStr1,aCount)*-1;
else result=nsCRT::strncmp((PRUnichar*)aStr2,aStr1,aCount)*-1;
return result;
}
typedef PRInt32 (*CompareChars)(const char* aStr1,const char* aStr2,PRUint32 aCount,PRBool aIgnoreCase);
CompareChars gCompare[2][2]={
{&Compare1To1,&Compare1To2},
{&Compare2To1,&Compare2To2},
};
//----------------------------------------------------------------------------------------
//
// This set of methods is used to convert the case of strings...
//
/**
* This method performs a case conversion the data in the given buffer
*
* @update gess 01/04/99
* @param aString is the buffer to be case shifted
* @param aCount is the number of chars to compare
* @param aToUpper tells us whether to convert to upper or lower
* @return 0
*/
PRInt32 ConvertCase1(char* aString,PRUint32 aCount,PRBool aToUpper);
PRInt32 ConvertCase1(char* aString,PRUint32 aCount,PRBool aToUpper){
PRInt32 result=0;
typedef char chartype;
chartype* cp = (chartype*)aString;
chartype* end = cp + aCount-1;
while (cp <= end) {
chartype ch = *cp;
if(aToUpper) {
if ((ch >= 'a') && (ch <= 'z')) {
*cp = chartype('A' + (ch - 'a'));
}
}
else {
if ((ch >= 'A') && (ch <= 'Z')) {
*cp = chartype('a' + (ch - 'A'));
}
}
cp++;
}
return result;
}
//----------------------------------------------------------------------------------------
#ifndef XPCOM_STANDALONE
#if !defined(RICKG_TESTBED) && !defined(STANDALONE_STRING_TESTS)
class HandleCaseConversionShutdown3 : public nsIShutdownListener {
public :
NS_IMETHOD OnShutdown(const nsCID& cid, nsISupports* service);
HandleCaseConversionShutdown3(void) { NS_INIT_REFCNT(); }
virtual ~HandleCaseConversionShutdown3(void) {}
NS_DECL_ISUPPORTS
};
static NS_DEFINE_CID(kUnicharUtilCID, NS_UNICHARUTIL_CID);
static nsICaseConversion * gCaseConv = 0;
NS_IMPL_ISUPPORTS1(HandleCaseConversionShutdown3, nsIShutdownListener);
nsresult HandleCaseConversionShutdown3::OnShutdown(const nsCID& cid, nsISupports* service) {
if (cid.Equals(kUnicharUtilCID)) {
NS_ASSERTION(service == gCaseConv, "wrong service!");
if(gCaseConv){
gCaseConv->Release();
gCaseConv = 0;
}
}
return NS_OK;
}
class CCaseConversionServiceInitializer {
public:
CCaseConversionServiceInitializer(){
HandleCaseConversionShutdown3* listener =
new HandleCaseConversionShutdown3();
if(listener){
nsServiceManager::GetService(kUnicharUtilCID, NS_GET_IID(nsICaseConversion),(nsISupports**) &gCaseConv, listener);
}
}
};
#endif
#endif /* XPCOM_STANDALONE */
//----------------------------------------------------------------------------------------
/**
* This method performs a case conversion the data in the given buffer
*
* @update gess 01/04/99
* @param aString is the buffer to be case shifted
* @param aCount is the number of chars to compare
* @param aToUpper tells us whether to convert to upper or lower
* @return 0
*/
PRInt32 ConvertCase2(char* aString,PRUint32 aCount,PRBool aToUpper);
PRInt32 ConvertCase2(char* aString,PRUint32 aCount,PRBool aToUpper){
PRUnichar* cp = (PRUnichar*)aString;
PRUnichar* end = cp + aCount-1;
PRInt32 result=0;
#ifndef XPCOM_STANDALONE
#if !defined(RICKG_TESTBED) && !defined(STANDALONE_STRING_TESTS)
static CCaseConversionServiceInitializer gCaseConversionServiceInitializer;
// I18N code begin
if(gCaseConv) {
nsresult err=(aToUpper) ? gCaseConv->ToUpper(cp, cp, aCount) : gCaseConv->ToLower(cp, cp, aCount);
if(NS_SUCCEEDED(err))
return 0;
}
// I18N code end
#endif
#endif /* XPCOM_STANDALONE */
while (cp <= end) {
PRUnichar ch = *cp;
if(aToUpper) {
if ((ch >= 'a') && (ch <= 'z')) {
*cp = PRUnichar('A' + (ch - 'a'));
}
}
else {
if ((ch >= 'A') && (ch <= 'Z')) {
*cp = PRUnichar('a' + (ch - 'A'));
}
}
cp++;
}
return result;
}
typedef PRInt32 (*CaseConverters)(char*,PRUint32,PRBool);
CaseConverters gCaseConverters[]={&ConvertCase1,&ConvertCase2};
//----------------------------------------------------------------------------------------
//
// This set of methods is used compress char sequences in a buffer...
//
/**
* This method compresses duplicate runs of a given char from the given buffer
*
* @update rickg 03.23.2000
* @param aString is the buffer to be manipulated
* @param aLength is the length of the buffer
* @param aSet tells us which chars to compress from given buffer
* @param aEliminateLeading tells us whether to strip chars from the start of the buffer
* @param aEliminateTrailing tells us whether to strip chars from the start of the buffer
* @return the new length of the given buffer
*/
PRInt32 CompressChars1(char* aString,PRUint32 aLength,const char* aSet);
PRInt32 CompressChars1(char* aString,PRUint32 aLength,const char* aSet){
char* from = aString;
char* end = aString + aLength;
char* to = from;
//this code converts /n, /t, /r into normal space ' ';
//it also compresses runs of whitespace down to a single char...
if(aSet && aString && (0 < aLength)){
PRUint32 aSetLen=strlen(aSet);
while (from < end) {
char theChar = *from++;
*to++=theChar; //always copy this char...
if((kNotFound!=FindChar1(aSet,aSetLen,0,theChar,PR_FALSE,aSetLen))){
while (from < end) {
theChar = *from++;
if(kNotFound==FindChar1(aSet,aSetLen,0,theChar,PR_FALSE,aSetLen)){
*to++ = theChar;
break;
}
} //while
} //if
} //if
*to = 0;
}
return to - aString;
}
/**
* This method compresses duplicate runs of a given char from the given buffer
*
* @update rickg 03.23.2000
* @param aString is the buffer to be manipulated
* @param aLength is the length of the buffer
* @param aSet tells us which chars to compress from given buffer
* @param aEliminateLeading tells us whether to strip chars from the start of the buffer
* @param aEliminateTrailing tells us whether to strip chars from the start of the buffer
* @return the new length of the given buffer
*/
PRInt32 CompressChars2(char* aString,PRUint32 aLength,const char* aSet);
PRInt32 CompressChars2(char* aString,PRUint32 aLength,const char* aSet){
PRUnichar* from = (PRUnichar*)aString;
PRUnichar* end = from + aLength;
PRUnichar* to = from;
//this code converts /n, /t, /r into normal space ' ';
//it also compresses runs of whitespace down to a single char...
if(aSet && aString && (0 < aLength)){
PRUint32 aSetLen=strlen(aSet);
while (from < end) {
PRUnichar theChar = *from++;
*to++=theChar; //always copy this char...
if((theChar<256) && (kNotFound!=FindChar1(aSet,aSetLen,0,theChar,PR_FALSE,aSetLen))){
while (from < end) {
theChar = *from++;
if(kNotFound==FindChar1(aSet,aSetLen,0,theChar,PR_FALSE,aSetLen)){
*to++ = theChar;
break;
}
} //while
} //if
} //if
*to = 0;
}
return to - (PRUnichar*)aString;
}
typedef PRInt32 (*CompressChars)(char* aString,PRUint32 aCount,const char* aSet);
CompressChars gCompressChars[]={&CompressChars1,&CompressChars2};
/**
* This method strips chars in a given set from the given buffer
*
* @update gess 01/04/99
* @param aString is the buffer to be manipulated
* @param aLength is the length of the buffer
* @param aSet tells us which chars to compress from given buffer
* @param aEliminateLeading tells us whether to strip chars from the start of the buffer
* @param aEliminateTrailing tells us whether to strip chars from the start of the buffer
* @return the new length of the given buffer
*/
PRInt32 StripChars1(char* aString,PRUint32 aLength,const char* aSet);
PRInt32 StripChars1(char* aString,PRUint32 aLength,const char* aSet){
char* to = aString;
char* from = aString-1;
char* end = aString + aLength;
if(aSet && aString && (0 < aLength)){
PRUint32 aSetLen=strlen(aSet);
while (++from < end) {
char theChar = *from;
if(kNotFound==FindChar1(aSet,aSetLen,0,theChar,PR_FALSE,aSetLen)){
*to++ = theChar;
}
}
*to = 0;
}
return to - (char*)aString;
}
/**
* This method strips chars in a given set from the given buffer
*
* @update gess 01/04/99
* @param aString is the buffer to be manipulated
* @param aLength is the length of the buffer
* @param aSet tells us which chars to compress from given buffer
* @param aEliminateLeading tells us whether to strip chars from the start of the buffer
* @param aEliminateTrailing tells us whether to strip chars from the start of the buffer
* @return the new length of the given buffer
*/
PRInt32 StripChars2(char* aString,PRUint32 aLength,const char* aSet);
PRInt32 StripChars2(char* aString,PRUint32 aLength,const char* aSet){
PRUnichar* to = (PRUnichar*)aString;
PRUnichar* from = (PRUnichar*)aString-1;
PRUnichar* end = to + aLength;
if(aSet && aString && (0 < aLength)){
PRUint32 aSetLen=strlen(aSet);
while (++from < end) {
PRUnichar theChar = *from;
//Note the test for ascii range below. If you have a real unicode char,
//and you're searching for chars in the (given) ascii string, there's no
//point in doing the real search since it's out of the ascii range.
if((255<theChar) || (kNotFound==FindChar1(aSet,aSetLen,0,theChar,PR_FALSE,aSetLen))){
*to++ = theChar;
}
}
*to = 0;
}
return to - (PRUnichar*)aString;
}
typedef PRInt32 (*StripChars)(char* aString,PRUint32 aCount,const char* aSet);
StripChars gStripChars[]={&StripChars1,&StripChars2};
#endif
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку