mozilla
/
pjs
зеркало из https://github.com/mozilla/pjs.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
pjs/layout/base/nsBidiPresUtils.cpp

2162 строки
74 KiB
C++
Исходник Ответственный История

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is Mozilla Communicator client code.
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
* Uri Bernstein <uriber@gmail.com>
* Haamed Gheibi <gheibi@metanetworking.com>
* Ehsan Akhgari <ehsan.akhgari@gmail.com>
*
* Alternatively, the contents of this file may be used under the terms of
* either of the GNU General Public License Version 2 or later (the "GPL"),
* or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifdef IBMBIDI
#include "nsBidiPresUtils.h"
#include "nsTextFragment.h"
#include "nsGkAtoms.h"
#include "nsPresContext.h"
#include "nsRenderingContext.h"
#include "nsIServiceManager.h"
#include "nsFrameManager.h"
#include "nsBidiUtils.h"
#include "nsCSSFrameConstructor.h"
#include "nsContainerFrame.h"
#include "nsInlineFrame.h"
#include "nsPlaceholderFrame.h"
#include "nsFirstLetterFrame.h"
#include "nsUnicodeProperties.h"
#include "nsTextFrame.h"
#undef NOISY_BIDI
#undef REALLY_NOISY_BIDI
using namespace mozilla;
static const PRUnichar kSpace = 0x0020;
static const PRUnichar kZWSP = 0x200B;
static const PRUnichar kLineSeparator = 0x2028;
static const PRUnichar kObjectSubstitute = 0xFFFC;
static const PRUnichar kLRE = 0x202A;
static const PRUnichar kRLE = 0x202B;
static const PRUnichar kLRO = 0x202D;
static const PRUnichar kRLO = 0x202E;
static const PRUnichar kPDF = 0x202C;
#define NS_BIDI_CONTROL_FRAME ((nsIFrame*)0xfffb1d1)
struct BidiParagraphData {
nsString mBuffer;
nsAutoTArray<PRUnichar, 16> mEmbeddingStack;
nsTArray<nsIFrame*> mLogicalFrames;
nsTArray<nsLineBox*> mLinePerFrame;
nsDataHashtable<nsISupportsHashKey, PRInt32> mContentToFrameIndex;
bool mIsVisual;
bool mReset;
nsBidiLevel mParaLevel;
nsIContent* mPrevContent;
nsAutoPtr<nsBidi> mBidiEngine;
nsIFrame* mPrevFrame;
nsAutoPtr<BidiParagraphData> mSubParagraph;
PRUint8 mParagraphDepth;
void Init(nsBlockFrame *aBlockFrame)
{
mContentToFrameIndex.Init();
mBidiEngine = new nsBidi();
mPrevContent = nsnull;
mParagraphDepth = 0;
bool styleDirectionIsRTL =
(NS_STYLE_DIRECTION_RTL == aBlockFrame->GetStyleVisibility()->mDirection);
if (aBlockFrame->GetStyleTextReset()->mUnicodeBidi &
NS_STYLE_UNICODE_BIDI_PLAINTEXT) {
// unicode-bidi: plaintext: the Bidi algorithm will determine the
// directionality of the paragraph according to the first strong
// directional character, defaulting to LTR if there is none.
mParaLevel = NSBIDI_DEFAULT_LTR;
} else {
mParaLevel = styleDirectionIsRTL ? NSBIDI_RTL : NSBIDI_LTR;
}
mIsVisual = aBlockFrame->PresContext()->IsVisualMode();
if (mIsVisual) {
/**
* Drill up in content to detect whether this is an element that needs to
* be rendered with logical order even on visual pages.
*
* We always use logical order on form controls, firstly so that text
* entry will be in logical order, but also because visual pages were
* written with the assumption that even if the browser had no support
* for right-to-left text rendering, it would use native widgets with
* bidi support to display form controls.
*
* We also use logical order in XUL elements, since we expect that if a
* XUL element appears in a visual page, it will be generated by an XBL
* binding and contain localized text which will be in logical order.
*/
for (nsIContent* content = aBlockFrame->GetContent() ; content;
content = content->GetParent()) {
if (content->IsNodeOfType(nsINode::eHTML_FORM_CONTROL) ||
content->IsXUL()) {
mIsVisual = false;
break;
}
}
}
}
BidiParagraphData* GetSubParagraph()
{
if (!mSubParagraph) {
mSubParagraph = new BidiParagraphData();
mSubParagraph->Init(this);
}
return mSubParagraph;
}
// Initialise a sub-paragraph from its containing paragraph
void Init(BidiParagraphData *aBpd)
{
mContentToFrameIndex.Init();
mBidiEngine = new nsBidi();
mPrevContent = nsnull;
mIsVisual = aBpd->mIsVisual;
mReset = false;
}
void Reset(nsIFrame* aBDIFrame, BidiParagraphData *aBpd)
{
mReset = true;
mLogicalFrames.Clear();
mLinePerFrame.Clear();
mContentToFrameIndex.Clear();
mBuffer.SetLength(0);
mPrevFrame = aBpd->mPrevFrame;
mParagraphDepth = aBpd->mParagraphDepth + 1;
bool isRTL = (NS_STYLE_DIRECTION_RTL ==
aBDIFrame->GetStyleVisibility()->mDirection);
mParaLevel = mParagraphDepth * 2;
if (isRTL) ++mParaLevel;
if (aBDIFrame->GetStyleTextReset()->mUnicodeBidi & NS_STYLE_UNICODE_BIDI_OVERRIDE) {
PushBidiControl(isRTL ? kRLO : kLRO);
}
}
nsresult SetPara()
{
return mBidiEngine->SetPara(mBuffer.get(), BufferLength(),
mParaLevel, nsnull);
}
/**
* mParaLevel can be NSBIDI_DEFAULT_LTR as well as NSBIDI_LTR or NSBIDI_RTL.
* GetParaLevel() returns the actual (resolved) paragraph level which is
* always either NSBIDI_LTR or NSBIDI_RTL
*/
nsBidiLevel GetParaLevel()
{
nsBidiLevel paraLevel = mParaLevel;
if (IS_DEFAULT_LEVEL(paraLevel)) {
mBidiEngine->GetParaLevel(&paraLevel);
}
return paraLevel;
}
nsresult CountRuns(PRInt32 *runCount){ return mBidiEngine->CountRuns(runCount); }
nsresult GetLogicalRun(PRInt32 aLogicalStart,
PRInt32* aLogicalLimit,
nsBidiLevel* aLevel)
{
nsresult rv = mBidiEngine->GetLogicalRun(aLogicalStart,
aLogicalLimit, aLevel);
if (mIsVisual || NS_FAILED(rv))
*aLevel = GetParaLevel();
return rv;
}
void ResetData()
{
mLogicalFrames.Clear();
mLinePerFrame.Clear();
mContentToFrameIndex.Clear();
mBuffer.SetLength(0);
mPrevContent = nsnull;
for (PRUint32 i = 0; i < mEmbeddingStack.Length(); ++i) {
mBuffer.Append(mEmbeddingStack[i]);
mLogicalFrames.AppendElement(NS_BIDI_CONTROL_FRAME);
mLinePerFrame.AppendElement((nsLineBox*)nsnull);
}
}
void AppendFrame(nsIFrame* aFrame,
nsBlockInFlowLineIterator* aLineIter,
nsIContent* aContent = nsnull)
{
if (aContent) {
mContentToFrameIndex.Put(aContent, FrameCount());
}
mLogicalFrames.AppendElement(aFrame);
AdvanceLineIteratorToFrame(aFrame, aLineIter, mPrevFrame);
mLinePerFrame.AppendElement(aLineIter->GetLine().get());
}
void AdvanceAndAppendFrame(nsIFrame** aFrame,
nsBlockInFlowLineIterator* aLineIter,
nsIFrame** aNextSibling)
{
nsIFrame* frame = *aFrame;
nsIFrame* nextSibling = *aNextSibling;
frame = frame->GetNextContinuation();
if (frame) {
AppendFrame(frame, aLineIter, nsnull);
/*
* If we have already overshot the saved next-sibling while
* scanning the frame's continuations, advance it.
*/
if (frame == nextSibling) {
nextSibling = frame->GetNextSibling();
}
}
*aFrame = frame;
*aNextSibling = nextSibling;
}
PRInt32 GetLastFrameForContent(nsIContent *aContent)
{
PRInt32 index = 0;
mContentToFrameIndex.Get(aContent, &index);
return index;
}
PRInt32 FrameCount(){ return mLogicalFrames.Length(); }
PRInt32 BufferLength(){ return mBuffer.Length(); }
nsIFrame* FrameAt(PRInt32 aIndex){ return mLogicalFrames[aIndex]; }
nsLineBox* GetLineForFrameAt(PRInt32 aIndex){ return mLinePerFrame[aIndex]; }
void AppendUnichar(PRUnichar aCh){ mBuffer.Append(aCh); }
void AppendString(const nsDependentSubstring& aString){ mBuffer.Append(aString); }
void AppendControlChar(PRUnichar aCh)
{
mLogicalFrames.AppendElement(NS_BIDI_CONTROL_FRAME);
mLinePerFrame.AppendElement((nsLineBox*)nsnull);
AppendUnichar(aCh);
}
void PushBidiControl(PRUnichar aCh)
{
AppendControlChar(aCh);
mEmbeddingStack.AppendElement(aCh);
}
void PopBidiControl()
{
AppendControlChar(kPDF);
NS_ASSERTION(mEmbeddingStack.Length(), "embedding/override underflow");
mEmbeddingStack.TruncateLength(mEmbeddingStack.Length() - 1);
}
void ClearBidiControls()
{
for (PRUint32 i = 0; i < mEmbeddingStack.Length(); ++i) {
AppendControlChar(kPDF);
}
}
static bool
IsFrameInCurrentLine(nsBlockInFlowLineIterator* aLineIter,
nsIFrame* aPrevFrame, nsIFrame* aFrame)
{
nsIFrame* endFrame = aLineIter->IsLastLineInList() ? nsnull :
aLineIter->GetLine().next()->mFirstChild;
nsIFrame* startFrame = aPrevFrame ? aPrevFrame : aLineIter->GetLine()->mFirstChild;
for (nsIFrame* frame = startFrame; frame && frame != endFrame;
frame = frame->GetNextSibling()) {
if (frame == aFrame)
return true;
}
return false;
}
static void
AdvanceLineIteratorToFrame(nsIFrame* aFrame,
nsBlockInFlowLineIterator* aLineIter,
nsIFrame*& aPrevFrame)
{
// Advance aLine to the line containing aFrame
nsIFrame* child = aFrame;
nsFrameManager* frameManager = aFrame->PresContext()->FrameManager();
nsIFrame* parent = nsLayoutUtils::GetParentOrPlaceholderFor(frameManager, child);
while (parent && !nsLayoutUtils::GetAsBlock(parent)) {
child = parent;
parent = nsLayoutUtils::GetParentOrPlaceholderFor(frameManager, child);
}
NS_ASSERTION (parent, "aFrame is not a descendent of aBlockFrame");
while (!IsFrameInCurrentLine(aLineIter, aPrevFrame, child)) {
#ifdef DEBUG
bool hasNext =
#endif
aLineIter->Next();
NS_ASSERTION(hasNext, "Can't find frame in lines!");
aPrevFrame = nsnull;
}
aPrevFrame = child;
}
};
struct BidiLineData {
nsTArray<nsIFrame*> mLogicalFrames;
nsTArray<nsIFrame*> mVisualFrames;
nsTArray<PRInt32> mIndexMap;
nsAutoTArray<PRUint8, 18> mLevels;
bool mIsReordered;
BidiLineData(nsIFrame* aFirstFrameOnLine, PRInt32 aNumFramesOnLine)
{
/**
* Initialize the logically-ordered array of frames using the top-level
* frames of a single line
*/
mLogicalFrames.Clear();
bool isReordered = false;
bool hasRTLFrames = false;
for (nsIFrame* frame = aFirstFrameOnLine;
frame && aNumFramesOnLine--;
frame = frame->GetNextSibling()) {
AppendFrame(frame);
PRUint8 level = nsBidiPresUtils::GetFrameEmbeddingLevel(frame);
mLevels.AppendElement(level);
mIndexMap.AppendElement(0);
if (level & 1) {
hasRTLFrames = true;
}
}
// Reorder the line
nsBidi::ReorderVisual(mLevels.Elements(), FrameCount(),
mIndexMap.Elements());
for (PRInt32 i = 0; i < FrameCount(); i++) {
mVisualFrames.AppendElement(LogicalFrameAt(mIndexMap[i]));
if (i != mIndexMap[i]) {
isReordered = true;
}
}
// If there's an RTL frame, assume the line is reordered
mIsReordered = isReordered || hasRTLFrames;
}
void AppendFrame(nsIFrame* aFrame)
{
mLogicalFrames.AppendElement(aFrame);
}
PRInt32 FrameCount(){ return mLogicalFrames.Length(); }
nsIFrame* LogicalFrameAt(PRInt32 aIndex){ return mLogicalFrames[aIndex]; }
nsIFrame* VisualFrameAt(PRInt32 aIndex){ return mVisualFrames[aIndex]; }
};
/* Some helper methods for Resolve() */
// Should this frame be split between text runs?
bool
IsBidiSplittable(nsIFrame* aFrame) {
nsIAtom* frameType = aFrame->GetType();
// Bidi inline containers should be split, unless they're line frames.
return aFrame->IsFrameOfType(nsIFrame::eBidiInlineContainer)
&& frameType != nsGkAtoms::lineFrame;
}
/**
* Create non-fluid continuations for the ancestors of a given frame all the way
* up the frame tree until we hit a non-splittable frame (a line or a block).
*
* @param aParent the first parent frame to be split
* @param aFrame the child frames after this frame are reparented to the
* newly-created continuation of aParent.
* If aFrame is null, all the children of aParent are reparented.
*/
static nsresult
SplitInlineAncestors(nsIFrame* aParent,
nsIFrame* aFrame)
{
nsPresContext *presContext = aParent->PresContext();
nsIPresShell *presShell = presContext->PresShell();
nsIFrame* frame = aFrame;
nsIFrame* parent = aParent;
nsIFrame* newParent;
while (IsBidiSplittable(parent)) {
nsIFrame* grandparent = parent->GetParent();
NS_ASSERTION(grandparent, "Couldn't get parent's parent in nsBidiPresUtils::SplitInlineAncestors");
nsresult rv = presShell->FrameConstructor()->
CreateContinuingFrame(presContext, parent, grandparent, &newParent, false);
if (NS_FAILED(rv)) {
return rv;
}
// Split the child list after |frame|, unless it is the last child.
if (!frame || frame->GetNextSibling()) {
nsContainerFrame* container = do_QueryFrame(parent);
nsFrameList tail = container->StealFramesAfter(frame);
// Reparent views as necessary
rv = nsContainerFrame::ReparentFrameViewList(presContext, tail, parent, newParent);
if (NS_FAILED(rv)) {
return rv;
}
// The parent's continuation adopts the siblings after the split.
rv = newParent->InsertFrames(nsIFrame::kNoReflowPrincipalList, nsnull, tail);
if (NS_FAILED(rv)) {
return rv;
}
}
// The list name kNoReflowPrincipalList would indicate we don't want reflow
nsFrameList temp(newParent, newParent);
rv = grandparent->InsertFrames(nsIFrame::kNoReflowPrincipalList, parent, temp);
if (NS_FAILED(rv)) {
return rv;
}
frame = parent;
parent = grandparent;
}
return NS_OK;
}
static void
MakeContinuationFluid(nsIFrame* aFrame, nsIFrame* aNext)
{
NS_ASSERTION (!aFrame->GetNextInFlow() || aFrame->GetNextInFlow() == aNext,
"next-in-flow is not next continuation!");
aFrame->SetNextInFlow(aNext);
NS_ASSERTION (!aNext->GetPrevInFlow() || aNext->GetPrevInFlow() == aFrame,
"prev-in-flow is not prev continuation!");
aNext->SetPrevInFlow(aFrame);
}
// If aFrame is the last child of its parent, convert bidi continuations to
// fluid continuations for all of its inline ancestors.
// If it isn't the last child, make sure that its continuation is fluid.
static void
JoinInlineAncestors(nsIFrame* aFrame)
{
nsIFrame* frame = aFrame;
do {
nsIFrame* next = frame->GetNextContinuation();
if (next) {
// Don't join frames if they come from different paragraph depths (i.e.
// one is bidi isolated relative to the other
if (nsBidiPresUtils::GetParagraphDepth(frame) ==
nsBidiPresUtils::GetParagraphDepth(next)) {
MakeContinuationFluid(frame, next);
}
}
// Join the parent only as long as we're its last child.
if (frame->GetNextSibling())
break;
frame = frame->GetParent();
} while (frame && IsBidiSplittable(frame));
}
static nsresult
CreateContinuation(nsIFrame* aFrame,
nsIFrame** aNewFrame,
bool aIsFluid)
{
NS_PRECONDITION(aNewFrame, "null OUT ptr");
NS_PRECONDITION(aFrame, "null ptr");
*aNewFrame = nsnull;
nsPresContext *presContext = aFrame->PresContext();
nsIPresShell *presShell = presContext->PresShell();
NS_ASSERTION(presShell, "PresShell must be set on PresContext before calling nsBidiPresUtils::CreateContinuation");
nsIFrame* parent = aFrame->GetParent();
NS_ASSERTION(parent, "Couldn't get frame parent in nsBidiPresUtils::CreateContinuation");
nsresult rv = NS_OK;
// Have to special case floating first letter frames because the continuation
// doesn't go in the first letter frame. The continuation goes with the rest
// of the text that the first letter frame was made out of.
if (parent->GetType() == nsGkAtoms::letterFrame &&
parent->GetStyleDisplay()->IsFloating()) {
nsFirstLetterFrame* letterFrame = do_QueryFrame(parent);
rv = letterFrame->CreateContinuationForFloatingParent(presContext, aFrame,
aNewFrame, aIsFluid);
return rv;
}
rv = presShell->FrameConstructor()->
CreateContinuingFrame(presContext, aFrame, parent, aNewFrame, aIsFluid);
if (NS_FAILED(rv)) {
return rv;
}
// The list name kNoReflowPrincipalList would indicate we don't want reflow
// XXXbz this needs higher-level framelist love
nsFrameList temp(*aNewFrame, *aNewFrame);
rv = parent->InsertFrames(nsIFrame::kNoReflowPrincipalList, aFrame, temp);
if (NS_FAILED(rv)) {
return rv;
}
if (!aIsFluid) {
// Split inline ancestor frames
rv = SplitInlineAncestors(parent, aFrame);
if (NS_FAILED(rv)) {
return rv;
}
}
return NS_OK;
}
/*
* Overview of the implementation of Resolve():
*
* Walk through the descendants of aBlockFrame and build:
* * mLogicalFrames: an nsTArray of nsIFrame* pointers in logical order
* * mBuffer: an nsString containing a representation of
* the content of the frames.
* In the case of text frames, this is the actual text context of the
* frames, but some other elements are represented in a symbolic form which
* will make the Unicode Bidi Algorithm give the correct results.
* Bidi embeddings and overrides set by CSS or <bdo> elements are
* represented by the corresponding Unicode control characters.
* <br> elements are represented by U+2028 LINE SEPARATOR
* Other inline elements are represented by U+FFFC OBJECT REPLACEMENT
* CHARACTER
*
* Then pass mBuffer to the Bidi engine for resolving of embedding levels
* by nsBidi::SetPara() and division into directional runs by
* nsBidi::CountRuns().
*
* Finally, walk these runs in logical order using nsBidi::GetLogicalRun() and
* correlate them with the frames indexed in mLogicalFrames, setting the
* baseLevel and embeddingLevel properties according to the results returned
* by the Bidi engine.
*
* The rendering layer requires each text frame to contain text in only one
* direction, so we may need to call EnsureBidiContinuation() to split frames.
* We may also need to call RemoveBidiContinuation() to convert frames created
* by EnsureBidiContinuation() in previous reflows into fluid continuations.
*/
nsresult
nsBidiPresUtils::Resolve(nsBlockFrame* aBlockFrame)
{
BidiParagraphData bpd;
bpd.Init(aBlockFrame);
// handle bidi-override being set on the block itself before calling
// TraverseFrames.
const nsStyleTextReset* text = aBlockFrame->GetStyleTextReset();
PRUnichar ch = 0;
if (text->mUnicodeBidi & NS_STYLE_UNICODE_BIDI_OVERRIDE) {
const nsStyleVisibility* vis = aBlockFrame->GetStyleVisibility();
if (NS_STYLE_DIRECTION_RTL == vis->mDirection) {
ch = kRLO;
}
else if (NS_STYLE_DIRECTION_LTR == vis->mDirection) {
ch = kLRO;
}
if (ch != 0) {
bpd.PushBidiControl(ch);
}
}
for (nsBlockFrame* block = aBlockFrame; block;
block = static_cast<nsBlockFrame*>(block->GetNextContinuation())) {
block->RemoveStateBits(NS_BLOCK_NEEDS_BIDI_RESOLUTION);
nsBlockInFlowLineIterator lineIter(block, block->begin_lines());
bpd.mPrevFrame = nsnull;
bpd.GetSubParagraph()->mPrevFrame = nsnull;
TraverseFrames(aBlockFrame, &lineIter, block->GetFirstPrincipalChild(), &bpd);
}
if (ch != 0) {
bpd.PopBidiControl();
}
return ResolveParagraph(aBlockFrame, &bpd);
}
nsresult
nsBidiPresUtils::ResolveParagraph(nsBlockFrame* aBlockFrame,
BidiParagraphData* aBpd)
{
nsPresContext *presContext = aBlockFrame->PresContext();
if (aBpd->BufferLength() < 1) {
return NS_OK;
}
aBpd->mBuffer.ReplaceChar("\t\r\n", kSpace);
PRInt32 runCount;
nsresult rv = aBpd->SetPara();
NS_ENSURE_SUCCESS(rv, rv);
PRUint8 embeddingLevel = aBpd->GetParaLevel();
rv = aBpd->CountRuns(&runCount);
NS_ENSURE_SUCCESS(rv, rv);
PRInt32 runLength = 0; // the length of the current run of text
PRInt32 lineOffset = 0; // the start of the current run
PRInt32 logicalLimit = 0; // the end of the current run + 1
PRInt32 numRun = -1;
PRInt32 fragmentLength = 0; // the length of the current text frame
PRInt32 frameIndex = -1; // index to the frames in mLogicalFrames
PRInt32 frameCount = aBpd->FrameCount();
PRInt32 contentOffset = 0; // offset of current frame in its content node
bool isTextFrame = false;
nsIFrame* frame = nsnull;
nsIContent* content = nsnull;
PRInt32 contentTextLength = 0;
FramePropertyTable *propTable = presContext->PropertyTable();
nsLineBox* currentLine = nsnull;
#ifdef DEBUG
#ifdef NOISY_BIDI
printf("Before Resolve(), aBlockFrame=0x%p, mBuffer='%s', frameCount=%d, runCount=%d\n",
(void*)aBlockFrame, NS_ConvertUTF16toUTF8(aBpd->mBuffer).get(), frameCount, runCount);
#ifdef REALLY_NOISY_BIDI
printf(" block frame tree=:\n");
aBlockFrame->List(stdout, 0);
#endif
#endif
#endif
nsIFrame* firstFrame = nsnull;
nsIFrame* lastFrame = nsnull;
for (; ;) {
if (fragmentLength <= 0) {
// Get the next frame from mLogicalFrames
if (++frameIndex >= frameCount) {
break;
}
frame = aBpd->FrameAt(frameIndex);
if (frame == NS_BIDI_CONTROL_FRAME ||
nsGkAtoms::textFrame != frame->GetType()) {
/*
* Any non-text frame corresponds to a single character in the text buffer
* (a bidi control character, LINE SEPARATOR, or OBJECT SUBSTITUTE)
*/
isTextFrame = false;
fragmentLength = 1;
}
else {
if (!firstFrame) {
firstFrame = frame;
}
lastFrame = frame;
currentLine = aBpd->GetLineForFrameAt(frameIndex);
content = frame->GetContent();
if (!content) {
rv = NS_OK;
break;
}
contentTextLength = content->TextLength();
if (contentTextLength == 0) {
frame->AdjustOffsetsForBidi(0, 0);
// Set the base level and embedding level of the current run even
// on an empty frame. Otherwise frame reordering will not be correct.
propTable->Set(frame, nsIFrame::EmbeddingLevelProperty(),
NS_INT32_TO_PTR(embeddingLevel));
propTable->Set(frame, nsIFrame::BaseLevelProperty(),
NS_INT32_TO_PTR(aBpd->GetParaLevel()));
propTable->Set(frame, nsIFrame::ParagraphDepthProperty(),
NS_INT32_TO_PTR(aBpd->mParagraphDepth));
continue;
}
PRInt32 start, end;
frame->GetOffsets(start, end);
NS_ASSERTION(!(contentTextLength < end - start),
"Frame offsets don't fit in content");
fragmentLength = NS_MIN(contentTextLength, end - start);
contentOffset = start;
isTextFrame = true;
}
} // if (fragmentLength <= 0)
if (runLength <= 0) {
// Get the next run of text from the Bidi engine
if (++numRun >= runCount) {
break;
}
lineOffset = logicalLimit;
if (NS_FAILED(aBpd->GetLogicalRun(
lineOffset, &logicalLimit, &embeddingLevel) ) ) {
break;
}
runLength = logicalLimit - lineOffset;
} // if (runLength <= 0)
if (frame == NS_BIDI_CONTROL_FRAME) {
frame = nsnull;
++lineOffset;
}
else {
propTable->Set(frame, nsIFrame::EmbeddingLevelProperty(),
NS_INT32_TO_PTR(embeddingLevel));
propTable->Set(frame, nsIFrame::BaseLevelProperty(),
NS_INT32_TO_PTR(aBpd->GetParaLevel()));
propTable->Set(frame, nsIFrame::ParagraphDepthProperty(),
NS_INT32_TO_PTR(aBpd->mParagraphDepth));
if (isTextFrame) {
if ( (runLength > 0) && (runLength < fragmentLength) ) {
/*
* The text in this frame continues beyond the end of this directional run.
* Create a non-fluid continuation frame for the next directional run.
*/
currentLine->MarkDirty();
nsIFrame* nextBidi;
PRInt32 runEnd = contentOffset + runLength;
rv = EnsureBidiContinuation(frame, &nextBidi, frameIndex,
contentOffset,
runEnd);
if (NS_FAILED(rv)) {
break;
}
nextBidi->AdjustOffsetsForBidi(runEnd,
contentOffset + fragmentLength);
lastFrame = frame = nextBidi;
contentOffset = runEnd;
} // if (runLength < fragmentLength)
else {
if (contentOffset + fragmentLength == contentTextLength) {
/*
* We have finished all the text in this content node. Convert any
* further non-fluid continuations to fluid continuations and advance
* frameIndex to the last frame in the content node
*/
PRInt32 newIndex = aBpd->GetLastFrameForContent(content);
if (newIndex > frameIndex) {
RemoveBidiContinuation(aBpd, frame,
frameIndex, newIndex, lineOffset);
frameIndex = newIndex;
lastFrame = frame = aBpd->FrameAt(frameIndex);
}
} else if (fragmentLength > 0 && runLength > fragmentLength) {
/*
* There is more text that belongs to this directional run in the next
* text frame: make sure it is a fluid continuation of the current frame.
* Do not advance frameIndex, because the next frame may contain
* multi-directional text and need to be split
*/
PRInt32 newIndex = frameIndex;
do {
} while (++newIndex < frameCount &&
aBpd->FrameAt(newIndex) == NS_BIDI_CONTROL_FRAME);
if (newIndex < frameCount) {
RemoveBidiContinuation(aBpd, frame,
frameIndex, newIndex, lineOffset);
}
} else if (runLength == fragmentLength) {
/*
* If the directional run ends at the end of the frame, make sure
* that any continuation is non-fluid
*/
nsIFrame* next = frame->GetNextInFlow();
if (next) {
frame->SetNextContinuation(next);
next->SetPrevContinuation(frame);
}
}
frame->AdjustOffsetsForBidi(contentOffset, contentOffset + fragmentLength);
currentLine->MarkDirty();
}
} // isTextFrame
else {
++lineOffset;
}
} // not bidi control frame
PRInt32 temp = runLength;
runLength -= fragmentLength;
fragmentLength -= temp;
if (frame && fragmentLength <= 0) {
// If the frame is at the end of a run, and this is not the end of our
// paragrah, split all ancestor inlines that need splitting.
// To determine whether we're at the end of the run, we check that we've
// finished processing the current run, and that the current frame
// doesn't have a fluid continuation (it could have a fluid continuation
// of zero length, so testing runLength alone is not sufficient).
if (runLength <= 0 && !frame->GetNextInFlow()) {
if (numRun + 1 < runCount) {
nsIFrame* child = frame;
nsIFrame* parent = frame->GetParent();
// As long as we're on the last sibling, the parent doesn't have to
// be split.
// However, if the parent has a fluid continuation, we do have to make
// it non-fluid. This can happen e.g. when we have a first-letter
// frame and the end of the first-letter coincides with the end of a
// directional run.
while (parent &&
IsBidiSplittable(parent) &&
!child->GetNextSibling()) {
nsIFrame* next = parent->GetNextInFlow();
if (next) {
parent->SetNextContinuation(next);
next->SetPrevContinuation(parent);
}
child = parent;
parent = child->GetParent();
}
if (parent && IsBidiSplittable(parent)) {
SplitInlineAncestors(parent, child);
}
}
}
else {
// We're not at an end of a run. If |frame| is the last child of its
// parent, and its ancestors happen to have bidi continuations, convert
// them into fluid continuations.
JoinInlineAncestors(frame);
}
}
} // for
if (aBpd->mParagraphDepth > 1) {
nsIFrame* child;
nsIFrame* parent;
if (firstFrame) {
child = firstFrame->GetParent();
if (child) {
parent = child->GetParent();
if (parent && IsBidiSplittable(parent)) {
// no need to null-check the result of GetPrevSibling, because
// SplitInlineAncestors accepts a null parameter
SplitInlineAncestors(parent, child->GetPrevSibling());
}
}
}
if (lastFrame) {
child = lastFrame->GetParent();
if (child) {
parent = child->GetParent();
if (parent && IsBidiSplittable(parent)) {
SplitInlineAncestors(parent, child);
}
}
}
}
#ifdef DEBUG
#ifdef REALLY_NOISY_BIDI
printf("---\nAfter Resolve(), frameTree =:\n");
aBlockFrame->List(stdout, 0);
printf("===\n");
#endif
#endif
return rv;
}
// Should this frame be treated as a leaf (e.g. when building mLogicalFrames)?
bool IsBidiLeaf(nsIFrame* aFrame) {
nsIFrame* kid = aFrame->GetFirstPrincipalChild();
return !kid
|| !aFrame->IsFrameOfType(nsIFrame::eBidiInlineContainer);
}
void
nsBidiPresUtils::TraverseFrames(nsBlockFrame* aBlockFrame,
nsBlockInFlowLineIterator* aLineIter,
nsIFrame* aCurrentFrame,
BidiParagraphData* aBpd)
{
if (!aCurrentFrame)
return;
nsIFrame* childFrame = aCurrentFrame;
do {
/*
* It's important to get the next sibling and next continuation *before*
* handling the frame: If we encounter a forced paragraph break and call
* ResolveParagraph within this loop, doing GetNextSibling and
* GetNextContinuation after that could return a bidi continuation that had
* just been split from the original childFrame and we would process it
* twice.
*/
nsIFrame* nextSibling = childFrame->GetNextSibling();
bool isLastFrame = !childFrame->GetNextContinuation();
bool isFirstFrame = !childFrame->GetPrevContinuation();
// If the real frame for a placeholder is a first letter frame, we need to
// drill down into it and include its contents in Bidi resolution.
// If not, we just use the placeholder.
nsIFrame* frame = childFrame;
if (nsGkAtoms::placeholderFrame == childFrame->GetType()) {
nsIFrame* realFrame =
nsPlaceholderFrame::GetRealFrameForPlaceholder(childFrame);
if (realFrame->GetType() == nsGkAtoms::letterFrame) {
frame = realFrame;
}
}
PRUnichar ch = 0;
if (frame->IsFrameOfType(nsIFrame::eBidiInlineContainer)) {
const nsStyleVisibility* vis = frame->GetStyleVisibility();
const nsStyleTextReset* text = frame->GetStyleTextReset();
if (text->mUnicodeBidi & NS_STYLE_UNICODE_BIDI_OVERRIDE) {
if (NS_STYLE_DIRECTION_RTL == vis->mDirection) {
ch = kRLO;
}
else if (NS_STYLE_DIRECTION_LTR == vis->mDirection) {
ch = kLRO;
}
} else if (text->mUnicodeBidi & NS_STYLE_UNICODE_BIDI_EMBED) {
if (NS_STYLE_DIRECTION_RTL == vis->mDirection) {
ch = kRLE;
}
else if (NS_STYLE_DIRECTION_LTR == vis->mDirection) {
ch = kLRE;
}
}
// Add a dummy frame pointer representing a bidi control code before the
// first frame of an element specifying embedding or override
if (ch != 0 && isFirstFrame) {
aBpd->PushBidiControl(ch);
}
}
if (IsBidiLeaf(frame)) {
/* Bidi leaf frame: add the frame to the mLogicalFrames array,
* and add its index to the mContentToFrameIndex hashtable. This
* will be used in RemoveBidiContinuation() to identify the last
* frame in the array with a given content.
*/
nsIContent* content = frame->GetContent();
aBpd->AppendFrame(frame, aLineIter, content);
// Append the content of the frame to the paragraph buffer
nsIAtom* frameType = frame->GetType();
if (nsGkAtoms::textFrame == frameType) {
if (content != aBpd->mPrevContent) {
aBpd->mPrevContent = content;
if (!frame->GetStyleContext()->GetStyleText()->NewlineIsSignificant()) {
content->AppendTextTo(aBpd->mBuffer);
} else {
/*
* For preformatted text we have to do bidi resolution on each line
* separately.
*/
nsAutoString text;
content->AppendTextTo(text);
nsIFrame* next;
do {
next = nsnull;
PRInt32 start, end;
frame->GetOffsets(start, end);
PRInt32 endLine = text.FindChar('\n', start);
if (endLine == -1) {
/*
* If there is no newline in the text content, just save the
* text from this frame and its continuations, and do bidi
* resolution later
*/
aBpd->AppendString(Substring(text, start));
while (frame && nextSibling) {
aBpd->AdvanceAndAppendFrame(&frame, aLineIter, &nextSibling);
}
break;
}
/*
* If there is a newline in the frame, break the frame after the
* newline, do bidi resolution and repeat until the last sibling
*/
++endLine;
/*
* If the frame ends before the new line, save the text and move
* into the next continuation
*/
aBpd->AppendString(Substring(text, start,
NS_MIN(end, endLine) - start));
while (end < endLine && nextSibling) {
aBpd->AdvanceAndAppendFrame(&frame, aLineIter, &nextSibling);
NS_ASSERTION(frame, "Premature end of continuation chain");
frame->GetOffsets(start, end);
aBpd->AppendString(Substring(text, start,
NS_MIN(end, endLine) - start));
}
if (end < endLine) {
aBpd->mPrevContent = nsnull;
break;
}
bool createdContinuation = false;
if (PRUint32(endLine) < text.Length()) {
/*
* Timing is everything here: if the frame already has a bidi
* continuation, we need to make the continuation fluid *before*
* resetting the length of the current frame. Otherwise
* nsTextFrame::SetLength won't set the continuation frame's
* text offsets correctly.
*
* On the other hand, if the frame doesn't have a continuation,
* we need to create one *after* resetting the length, or
* CreateContinuingFrame will complain that there is no more
* content for the continuation.
*/
next = frame->GetNextInFlow();
if (!next) {
// If the frame already has a bidi continuation, make it fluid
next = frame->GetNextContinuation();
if (next) {
MakeContinuationFluid(frame, next);
JoinInlineAncestors(frame);
}
}
nsTextFrame* textFrame = static_cast<nsTextFrame*>(frame);
textFrame->SetLength(endLine - start, nsnull);
if (!next) {
// If the frame has no next in flow, create one.
CreateContinuation(frame, &next, true);
createdContinuation = true;
}
}
ResolveParagraphWithinBlock(aBlockFrame, aBpd);
if (!nextSibling && !createdContinuation) {
break;
} else if (next) {
frame = next;
aBpd->AppendFrame(frame, aLineIter);
}
/*
* If we have already overshot the saved next-sibling while
* scanning the frame's continuations, advance it.
*/
if (frame && frame == nextSibling) {
nextSibling = frame->GetNextSibling();
}
} while (next);
}
}
} else if (nsGkAtoms::brFrame == frameType) {
// break frame -- append line separator
aBpd->AppendUnichar(kLineSeparator);
ResolveParagraphWithinBlock(aBlockFrame, aBpd);
} else {
// other frame type -- see the Unicode Bidi Algorithm:
// "...inline objects (such as graphics) are treated as if they are ...
// U+FFFC"
// <wbr>, however, is treated as U+200B ZERO WIDTH SPACE. See
// http://dev.w3.org/html5/spec/Overview.html#phrasing-content-1
aBpd->AppendUnichar(content->IsHTML(nsGkAtoms::wbr) ?
kZWSP : kObjectSubstitute);
if (!frame->GetStyleContext()->GetStyleDisplay()->IsInlineOutside()) {
// if it is not inline, end the paragraph
ResolveParagraphWithinBlock(aBlockFrame, aBpd);
}
}
}
else {
// For a non-leaf frame, recurse into TraverseFrames
nsIFrame* kid = frame->GetFirstPrincipalChild();
if (kid) {
const nsStyleTextReset* text = frame->GetStyleTextReset();
if (text->mUnicodeBidi & NS_STYLE_UNICODE_BIDI_ISOLATE) {
// css "unicode-bidi: isolate" and html5 bdi:
// resolve the element as a separate paragraph
BidiParagraphData* subParagraph = aBpd->GetSubParagraph();
/*
* As at the beginning of the loop, it's important to check for
* next-continuations before handling the frame. If we do
* TraverseFrames and *then* do GetNextContinuation on the original
* first frame, it could return a bidi continuation that had only
* just been created, and we would skip doing bidi resolution on the
* last part of the sub-paragraph.
*/
bool isLastContinuation = !frame->GetNextContinuation();
if (!frame->GetPrevContinuation() || !subParagraph->mReset) {
subParagraph->Reset(frame, aBpd);
}
TraverseFrames(aBlockFrame, aLineIter, kid, subParagraph);
if (isLastContinuation) {
ResolveParagraph(aBlockFrame, subParagraph);
}
// Treat the element as a neutral character within its containing
// paragraph.
aBpd->AppendControlChar(kObjectSubstitute);
} else {
TraverseFrames(aBlockFrame, aLineIter, kid, aBpd);
}
}
}
// If the element is attributed by dir, indicate direction pop (add PDF frame)
if (isLastFrame) {
if (ch) {
// Add a dummy frame pointer representing a bidi control code after the
// last frame of an element specifying embedding or override
aBpd->PopBidiControl();
}
}
childFrame = nextSibling;
} while (childFrame);
}
void
nsBidiPresUtils::ResolveParagraphWithinBlock(nsBlockFrame* aBlockFrame,
BidiParagraphData* aBpd)
{
aBpd->ClearBidiControls();
ResolveParagraph(aBlockFrame, aBpd);
aBpd->ResetData();
}
void
nsBidiPresUtils::ReorderFrames(nsIFrame* aFirstFrameOnLine,
PRInt32 aNumFramesOnLine)
{
// If this line consists of a line frame, reorder the line frame's children.
if (aFirstFrameOnLine->GetType() == nsGkAtoms::lineFrame) {
aFirstFrameOnLine = aFirstFrameOnLine->GetFirstPrincipalChild();
if (!aFirstFrameOnLine)
return;
// All children of the line frame are on the first line. Setting aNumFramesOnLine
// to -1 makes InitLogicalArrayFromLine look at all of them.
aNumFramesOnLine = -1;
}
BidiLineData bld(aFirstFrameOnLine, aNumFramesOnLine);
RepositionInlineFrames(&bld, aFirstFrameOnLine);
}
nsIFrame*
nsBidiPresUtils::GetFirstLeaf(nsIFrame* aFrame)
{
nsIFrame* firstLeaf = aFrame;
while (!IsBidiLeaf(firstLeaf)) {
nsIFrame* firstChild = firstLeaf->GetFirstPrincipalChild();
nsIFrame* realFrame = nsPlaceholderFrame::GetRealFrameFor(firstChild);
firstLeaf = (realFrame->GetType() == nsGkAtoms::letterFrame) ?
realFrame : firstChild;
}
return firstLeaf;
}
nsBidiLevel
nsBidiPresUtils::GetFrameEmbeddingLevel(nsIFrame* aFrame)
{
return NS_GET_EMBEDDING_LEVEL(nsBidiPresUtils::GetFirstLeaf(aFrame));
}
PRUint8
nsBidiPresUtils::GetParagraphDepth(nsIFrame* aFrame)
{
return NS_GET_PARAGRAPH_DEPTH(nsBidiPresUtils::GetFirstLeaf(aFrame));
}
nsBidiLevel
nsBidiPresUtils::GetFrameBaseLevel(nsIFrame* aFrame)
{
nsIFrame* firstLeaf = aFrame;
while (!IsBidiLeaf(firstLeaf)) {
firstLeaf = firstLeaf->GetFirstPrincipalChild();
}
return NS_GET_BASE_LEVEL(firstLeaf);
}
void
nsBidiPresUtils::IsLeftOrRightMost(nsIFrame* aFrame,
nsContinuationStates* aContinuationStates,
bool& aIsLeftMost /* out */,
bool& aIsRightMost /* out */)
{
const nsStyleVisibility* vis = aFrame->GetStyleVisibility();
bool isLTR = (NS_STYLE_DIRECTION_LTR == vis->mDirection);
/*
* Since we lay out frames from left to right (in both LTR and RTL), visiting a
* frame with 'mFirstVisualFrame == nsnull', means it's the first appearance of
* one of its continuation chain frames on the line.
* To determine if it's the last visual frame of its continuation chain on the line
* or not, we count the number of frames of the chain on the line, and then reduce
* it when we lay out a frame of the chain. If this value becomes 1 it means
* that it's the last visual frame of its continuation chain on this line.
*/
nsFrameContinuationState* frameState = aContinuationStates->GetEntry(aFrame);
nsFrameContinuationState* firstFrameState;
if (!frameState->mFirstVisualFrame) {
// aFrame is the first visual frame of its continuation chain
nsFrameContinuationState* contState;
nsIFrame* frame;
frameState->mFrameCount = 1;
frameState->mFirstVisualFrame = aFrame;
/**
* Traverse continuation chain of aFrame in both backward and forward
* directions while the frames are on this line. Count the frames and
* set their mFirstVisualFrame to aFrame.
*/
// Traverse continuation chain backward
for (frame = aFrame->GetPrevContinuation();
frame && (contState = aContinuationStates->GetEntry(frame));
frame = frame->GetPrevContinuation()) {
frameState->mFrameCount++;
contState->mFirstVisualFrame = aFrame;
}
frameState->mHasContOnPrevLines = (frame != nsnull);
// Traverse continuation chain forward
for (frame = aFrame->GetNextContinuation();
frame && (contState = aContinuationStates->GetEntry(frame));
frame = frame->GetNextContinuation()) {
frameState->mFrameCount++;
contState->mFirstVisualFrame = aFrame;
}
frameState->mHasContOnNextLines = (frame != nsnull);
aIsLeftMost = isLTR ? !frameState->mHasContOnPrevLines
: !frameState->mHasContOnNextLines;
firstFrameState = frameState;
} else {
// aFrame is not the first visual frame of its continuation chain
aIsLeftMost = false;
firstFrameState = aContinuationStates->GetEntry(frameState->mFirstVisualFrame);
}
aIsRightMost = (firstFrameState->mFrameCount == 1) &&
(isLTR ? !firstFrameState->mHasContOnNextLines
: !firstFrameState->mHasContOnPrevLines);
if ((aIsLeftMost || aIsRightMost) &&
(aFrame->GetStateBits() & NS_FRAME_IS_SPECIAL)) {
// For ib splits, don't treat anything except the last part as
// endmost or anything except the first part as startmost.
// As an optimization, only get the first continuation once.
nsIFrame* firstContinuation = aFrame->GetFirstContinuation();
if (nsLayoutUtils::FrameIsNonLastInIBSplit(firstContinuation)) {
// We are not endmost
if (isLTR) {
aIsRightMost = false;
} else {
aIsLeftMost = false;
}
}
if (nsLayoutUtils::FrameIsNonFirstInIBSplit(firstContinuation)) {
// We are not startmost
if (isLTR) {
aIsLeftMost = false;
} else {
aIsRightMost = false;
}
}
}
// Reduce number of remaining frames of the continuation chain on the line.
firstFrameState->mFrameCount--;
}
void
nsBidiPresUtils::RepositionFrame(nsIFrame* aFrame,
bool aIsOddLevel,
nscoord& aLeft,
nsContinuationStates* aContinuationStates)
{
if (!aFrame)
return;
bool isLeftMost, isRightMost;
IsLeftOrRightMost(aFrame,
aContinuationStates,
isLeftMost /* out */,
isRightMost /* out */);
nsInlineFrame* testFrame = do_QueryFrame(aFrame);
if (testFrame) {
aFrame->AddStateBits(NS_INLINE_FRAME_BIDI_VISUAL_STATE_IS_SET);
if (isLeftMost)
aFrame->AddStateBits(NS_INLINE_FRAME_BIDI_VISUAL_IS_LEFT_MOST);
else
aFrame->RemoveStateBits(NS_INLINE_FRAME_BIDI_VISUAL_IS_LEFT_MOST);
if (isRightMost)
aFrame->AddStateBits(NS_INLINE_FRAME_BIDI_VISUAL_IS_RIGHT_MOST);
else
aFrame->RemoveStateBits(NS_INLINE_FRAME_BIDI_VISUAL_IS_RIGHT_MOST);
}
// This method is called from nsBlockFrame::PlaceLine via the call to
// bidiUtils->ReorderFrames, so this is guaranteed to be after the inlines
// have been reflowed, which is required for GetUsedMargin/Border/Padding
nsMargin margin = aFrame->GetUsedMargin();
if (isLeftMost)
aLeft += margin.left;
nscoord start = aLeft;
if (!IsBidiLeaf(aFrame))
{
nscoord x = 0;
nsMargin borderPadding = aFrame->GetUsedBorderAndPadding();
if (isLeftMost) {
x += borderPadding.left;
}
// If aIsOddLevel is true, so we need to traverse the child list
// in reverse order, to make it O(n) we store the list locally and
// iterate the list reversely
nsTArray<nsIFrame*> childList;
nsIFrame *frame = aFrame->GetFirstPrincipalChild();
if (frame && aIsOddLevel) {
childList.AppendElement((nsIFrame*)nsnull);
while (frame) {
childList.AppendElement(frame);
frame = frame->GetNextSibling();
}
frame = childList[childList.Length() - 1];
}
// Reposition the child frames
PRInt32 index = 0;
while (frame) {
RepositionFrame(frame,
aIsOddLevel,
x,
aContinuationStates);
index++;
frame = aIsOddLevel ?
childList[childList.Length() - index - 1] :
frame->GetNextSibling();
}
if (isRightMost) {
x += borderPadding.right;
}
aLeft += x;
} else {
aLeft += aFrame->GetSize().width;
}
nsRect rect = aFrame->GetRect();
aFrame->SetRect(nsRect(start, rect.y, aLeft - start, rect.height));
if (isRightMost)
aLeft += margin.right;
}
void
nsBidiPresUtils::InitContinuationStates(nsIFrame* aFrame,
nsContinuationStates* aContinuationStates)
{
nsFrameContinuationState* state = aContinuationStates->PutEntry(aFrame);
state->mFirstVisualFrame = nsnull;
state->mFrameCount = 0;
if (!IsBidiLeaf(aFrame)) {
// Continue for child frames
nsIFrame* frame;
for (frame = aFrame->GetFirstPrincipalChild();
frame;
frame = frame->GetNextSibling()) {
InitContinuationStates(frame,
aContinuationStates);
}
}
}
void
nsBidiPresUtils::RepositionInlineFrames(BidiLineData *aBld,
nsIFrame* aFirstChild)
{
const nsStyleVisibility* vis = aFirstChild->GetStyleVisibility();
bool isLTR = (NS_STYLE_DIRECTION_LTR == vis->mDirection);
nscoord leftSpace = 0;
// This method is called from nsBlockFrame::PlaceLine via the call to
// bidiUtils->ReorderFrames, so this is guaranteed to be after the inlines
// have been reflowed, which is required for GetUsedMargin/Border/Padding
nsMargin margin = aFirstChild->GetUsedMargin();
if (!aFirstChild->GetPrevContinuation() &&
!nsLayoutUtils::FrameIsNonFirstInIBSplit(aFirstChild))
leftSpace = isLTR ? margin.left : margin.right;
nscoord left = aFirstChild->GetPosition().x - leftSpace;
nsIFrame* frame;
PRInt32 count = aBld->mVisualFrames.Length();
PRInt32 index;
nsContinuationStates continuationStates;
continuationStates.Init();
// Initialize continuation states to (nsnull, 0) for
// each frame on the line.
for (index = 0; index < count; index++) {
InitContinuationStates(aBld->VisualFrameAt(index), &continuationStates);
}
// Reposition frames in visual order
for (index = 0; index < count; index++) {
frame = aBld->VisualFrameAt(index);
RepositionFrame(frame,
(aBld->mLevels[aBld->mIndexMap[index]] & 1),
left,
&continuationStates);
} // for
}
bool
nsBidiPresUtils::CheckLineOrder(nsIFrame* aFirstFrameOnLine,
PRInt32 aNumFramesOnLine,
nsIFrame** aFirstVisual,
nsIFrame** aLastVisual)
{
BidiLineData bld(aFirstFrameOnLine, aNumFramesOnLine);
PRInt32 count = bld.FrameCount();
if (aFirstVisual) {
*aFirstVisual = bld.VisualFrameAt(0);
}
if (aLastVisual) {
*aLastVisual = bld.VisualFrameAt(count-1);
}
return bld.mIsReordered;
}
nsIFrame*
nsBidiPresUtils::GetFrameToRightOf(const nsIFrame* aFrame,
nsIFrame* aFirstFrameOnLine,
PRInt32 aNumFramesOnLine)
{
BidiLineData bld(aFirstFrameOnLine, aNumFramesOnLine);
PRInt32 count = bld.mVisualFrames.Length();
if (aFrame == nsnull && count)
return bld.VisualFrameAt(0);
for (PRInt32 i = 0; i < count - 1; i++) {
if (bld.VisualFrameAt(i) == aFrame) {
return bld.VisualFrameAt(i+1);
}
}
return nsnull;
}
nsIFrame*
nsBidiPresUtils::GetFrameToLeftOf(const nsIFrame* aFrame,
nsIFrame* aFirstFrameOnLine,
PRInt32 aNumFramesOnLine)
{
BidiLineData bld(aFirstFrameOnLine, aNumFramesOnLine);
PRInt32 count = bld.mVisualFrames.Length();
if (aFrame == nsnull && count)
return bld.VisualFrameAt(count-1);
for (PRInt32 i = 1; i < count; i++) {
if (bld.VisualFrameAt(i) == aFrame) {
return bld.VisualFrameAt(i-1);
}
}
return nsnull;
}
inline nsresult
nsBidiPresUtils::EnsureBidiContinuation(nsIFrame* aFrame,
nsIFrame** aNewFrame,
PRInt32& aFrameIndex,
PRInt32 aStart,
PRInt32 aEnd)
{
NS_PRECONDITION(aNewFrame, "null OUT ptr");
NS_PRECONDITION(aFrame, "aFrame is null");
aFrame->AdjustOffsetsForBidi(aStart, aEnd);
return CreateContinuation(aFrame, aNewFrame, false);
}
void
nsBidiPresUtils::RemoveBidiContinuation(BidiParagraphData *aBpd,
nsIFrame* aFrame,
PRInt32 aFirstIndex,
PRInt32 aLastIndex,
PRInt32& aOffset)
{
FrameProperties props = aFrame->Properties();
nsBidiLevel embeddingLevel =
(nsBidiLevel)NS_PTR_TO_INT32(props.Get(nsIFrame::EmbeddingLevelProperty()));
nsBidiLevel baseLevel =
(nsBidiLevel)NS_PTR_TO_INT32(props.Get(nsIFrame::BaseLevelProperty()));
PRUint8 paragraphDepth =
NS_PTR_TO_INT32(props.Get(nsIFrame::ParagraphDepthProperty()));
for (PRInt32 index = aFirstIndex + 1; index <= aLastIndex; index++) {
nsIFrame* frame = aBpd->FrameAt(index);
if (frame == NS_BIDI_CONTROL_FRAME) {
++aOffset;
}
else {
// Make the frame and its continuation ancestors fluid,
// so they can be reused or deleted by normal reflow code
FrameProperties frameProps = frame->Properties();
frameProps.Set(nsIFrame::EmbeddingLevelProperty(),
NS_INT32_TO_PTR(embeddingLevel));
frameProps.Set(nsIFrame::BaseLevelProperty(),
NS_INT32_TO_PTR(baseLevel));
frameProps.Set(nsIFrame::ParagraphDepthProperty(),
NS_INT32_TO_PTR(paragraphDepth));
frame->AddStateBits(NS_FRAME_IS_BIDI);
while (frame) {
nsIFrame* prev = frame->GetPrevContinuation();
if (prev) {
MakeContinuationFluid(prev, frame);
frame = frame->GetParent();
} else {
break;
}
}
}
}
// Make sure that the last continuation we made fluid does not itself have a
// fluid continuation (this can happen when re-resolving after dynamic changes
// to content)
nsIFrame* lastFrame = aBpd->FrameAt(aLastIndex);
nsIFrame* next = lastFrame->GetNextInFlow();
if (next) {
lastFrame->SetNextContinuation(next);
next->SetPrevContinuation(lastFrame);
}
}
nsresult
nsBidiPresUtils::FormatUnicodeText(nsPresContext* aPresContext,
PRUnichar* aText,
PRInt32& aTextLength,
nsCharType aCharType,
bool aIsOddLevel)
{
NS_ASSERTION(aIsOddLevel == 0 || aIsOddLevel == 1, "aIsOddLevel should be 0 or 1");
nsresult rv = NS_OK;
// ahmed
//adjusted for correct numeral shaping
PRUint32 bidiOptions = aPresContext->GetBidi();
switch (GET_BIDI_OPTION_NUMERAL(bidiOptions)) {
case IBMBIDI_NUMERAL_HINDI:
HandleNumbers(aText,aTextLength,IBMBIDI_NUMERAL_HINDI);
break;
case IBMBIDI_NUMERAL_ARABIC:
HandleNumbers(aText,aTextLength,IBMBIDI_NUMERAL_ARABIC);
break;
case IBMBIDI_NUMERAL_PERSIAN:
HandleNumbers(aText,aTextLength,IBMBIDI_NUMERAL_PERSIAN);
break;
case IBMBIDI_NUMERAL_REGULAR:
switch (aCharType) {
case eCharType_EuropeanNumber:
HandleNumbers(aText,aTextLength,IBMBIDI_NUMERAL_ARABIC);
break;
case eCharType_ArabicNumber:
HandleNumbers(aText,aTextLength,IBMBIDI_NUMERAL_HINDI);
break;
default:
break;
}
break;
case IBMBIDI_NUMERAL_HINDICONTEXT:
if ( ( (GET_BIDI_OPTION_DIRECTION(bidiOptions)==IBMBIDI_TEXTDIRECTION_RTL) && (IS_ARABIC_DIGIT (aText[0])) ) || (eCharType_ArabicNumber == aCharType) )
HandleNumbers(aText,aTextLength,IBMBIDI_NUMERAL_HINDI);
else if (eCharType_EuropeanNumber == aCharType)
HandleNumbers(aText,aTextLength,IBMBIDI_NUMERAL_ARABIC);
break;
case IBMBIDI_NUMERAL_PERSIANCONTEXT:
if ( ( (GET_BIDI_OPTION_DIRECTION(bidiOptions)==IBMBIDI_TEXTDIRECTION_RTL) && (IS_ARABIC_DIGIT (aText[0])) ) || (eCharType_ArabicNumber == aCharType) )
HandleNumbers(aText,aTextLength,IBMBIDI_NUMERAL_PERSIAN);
else if (eCharType_EuropeanNumber == aCharType)
HandleNumbers(aText,aTextLength,IBMBIDI_NUMERAL_ARABIC);
break;
case IBMBIDI_NUMERAL_NOMINAL:
default:
break;
}
StripBidiControlCharacters(aText, aTextLength);
return rv;
}
void
nsBidiPresUtils::StripBidiControlCharacters(PRUnichar* aText,
PRInt32& aTextLength)
{
if ( (nsnull == aText) || (aTextLength < 1) ) {
return;
}
PRInt32 stripLen = 0;
for (PRInt32 i = 0; i < aTextLength; i++) {
// XXX: This silently ignores surrogate characters.
// As of Unicode 4.0, all Bidi control characters are within the BMP.
if (IsBidiControl((PRUint32)aText[i])) {
++stripLen;
}
else {
aText[i - stripLen] = aText[i];
}
}
aTextLength -= stripLen;
}
#if 0 // XXX: for the future use ???
void
RemoveDiacritics(PRUnichar* aText,
PRInt32& aTextLength)
{
if (aText && (aTextLength > 0) ) {
PRInt32 offset = 0;
for (PRInt32 i = 0; i < aTextLength && aText[i]; i++) {
if (IS_BIDI_DIACRITIC(aText[i]) ) {
++offset;
continue;
}
aText[i - offset] = aText[i];
}
aTextLength = i - offset;
aText[aTextLength] = 0;
}
}
#endif
void
nsBidiPresUtils::CalculateCharType(nsBidi* aBidiEngine,
const PRUnichar* aText,
PRInt32& aOffset,
PRInt32 aCharTypeLimit,
PRInt32& aRunLimit,
PRInt32& aRunLength,
PRInt32& aRunCount,
PRUint8& aCharType,
PRUint8& aPrevCharType)
{
bool strongTypeFound = false;
PRInt32 offset;
nsCharType charType;
aCharType = eCharType_OtherNeutral;
for (offset = aOffset; offset < aCharTypeLimit; offset++) {
// Make sure we give RTL chartype to all characters that would be classified
// as Right-To-Left by a bidi platform.
// (May differ from the UnicodeData, eg we set RTL chartype to some NSMs.)
if (IS_HEBREW_CHAR(aText[offset]) ) {
charType = eCharType_RightToLeft;
}
else if (IS_ARABIC_ALPHABETIC(aText[offset]) ) {
charType = eCharType_RightToLeftArabic;
}
else {
aBidiEngine->GetCharTypeAt(offset, &charType);
}
if (!CHARTYPE_IS_WEAK(charType) ) {
if (strongTypeFound
&& (charType != aPrevCharType)
&& (CHARTYPE_IS_RTL(charType) || CHARTYPE_IS_RTL(aPrevCharType) ) ) {
// Stop at this point to ensure uni-directionality of the text
// (from platform's point of view).
// Also, don't mix Arabic and Hebrew content (since platform may
// provide BIDI support to one of them only).
aRunLength = offset - aOffset;
aRunLimit = offset;
++aRunCount;
break;
}
if ( (eCharType_RightToLeftArabic == aPrevCharType
|| eCharType_ArabicNumber == aPrevCharType)
&& eCharType_EuropeanNumber == charType) {
charType = eCharType_ArabicNumber;
}
// Set PrevCharType to the last strong type in this frame
// (for correct numeric shaping)
aPrevCharType = charType;
strongTypeFound = true;
aCharType = charType;
}
}
aOffset = offset;
}
nsresult nsBidiPresUtils::ProcessText(const PRUnichar* aText,
PRInt32 aLength,
nsBidiDirection aBaseDirection,
nsPresContext* aPresContext,
BidiProcessor& aprocessor,
Mode aMode,
nsBidiPositionResolve* aPosResolve,
PRInt32 aPosResolveCount,
nscoord* aWidth,
nsBidi* aBidiEngine)
{
NS_ASSERTION((aPosResolve == nsnull) != (aPosResolveCount > 0), "Incorrect aPosResolve / aPosResolveCount arguments");
PRInt32 runCount;
nsAutoString textBuffer(aText, aLength);
nsresult rv = aBidiEngine->SetPara(aText, aLength, aBaseDirection, nsnull);
if (NS_FAILED(rv))
return rv;
rv = aBidiEngine->CountRuns(&runCount);
if (NS_FAILED(rv))
return rv;
nscoord xOffset = 0;
nscoord width, xEndRun = 0;
nscoord totalWidth = 0;
PRInt32 i, start, limit, length;
PRUint32 visualStart = 0;
PRUint8 charType;
PRUint8 prevType = eCharType_LeftToRight;
nsBidiLevel level;
for(int nPosResolve=0; nPosResolve < aPosResolveCount; ++nPosResolve)
{
aPosResolve[nPosResolve].visualIndex = kNotFound;
aPosResolve[nPosResolve].visualLeftTwips = kNotFound;
aPosResolve[nPosResolve].visualWidth = kNotFound;
}
for (i = 0; i < runCount; i++) {
rv = aBidiEngine->GetVisualRun(i, &start, &length, &aBaseDirection);
if (NS_FAILED(rv))
return rv;
rv = aBidiEngine->GetLogicalRun(start, &limit, &level);
if (NS_FAILED(rv))
return rv;
PRInt32 subRunLength = limit - start;
PRInt32 lineOffset = start;
PRInt32 typeLimit = NS_MIN(limit, aLength);
PRInt32 subRunCount = 1;
PRInt32 subRunLimit = typeLimit;
/*
* If |level| is even, i.e. the direction of the run is left-to-right, we
* render the subruns from left to right and increment the x-coordinate
* |xOffset| by the width of each subrun after rendering.
*
* If |level| is odd, i.e. the direction of the run is right-to-left, we
* render the subruns from right to left. We begin by incrementing |xOffset| by
* the width of the whole run, and then decrement it by the width of each
* subrun before rendering. After rendering all the subruns, we restore the
* x-coordinate of the end of the run for the start of the next run.
*/
if (level & 1) {
aprocessor.SetText(aText + start, subRunLength, nsBidiDirection(level & 1));
width = aprocessor.GetWidth();
xOffset += width;
xEndRun = xOffset;
}
while (subRunCount > 0) {
// CalculateCharType can increment subRunCount if the run
// contains mixed character types
CalculateCharType(aBidiEngine, aText, lineOffset, typeLimit, subRunLimit, subRunLength, subRunCount, charType, prevType);
nsAutoString runVisualText;
runVisualText.Assign(aText + start, subRunLength);
if (PRInt32(runVisualText.Length()) < subRunLength)
return NS_ERROR_OUT_OF_MEMORY;
FormatUnicodeText(aPresContext, runVisualText.BeginWriting(), subRunLength,
(nsCharType)charType, level & 1);
aprocessor.SetText(runVisualText.get(), subRunLength, nsBidiDirection(level & 1));
width = aprocessor.GetWidth();
totalWidth += width;
if (level & 1) {
xOffset -= width;
}
if (aMode == MODE_DRAW) {
aprocessor.DrawText(xOffset, width);
}
/*
* The caller may request to calculate the visual position of one
* or more characters.
*/
for(int nPosResolve=0; nPosResolve<aPosResolveCount; ++nPosResolve)
{
nsBidiPositionResolve* posResolve = &aPosResolve[nPosResolve];
/*
* Did we already resolve this position's visual metric? If so, skip.
*/
if (posResolve->visualLeftTwips != kNotFound)
continue;
/*
* First find out if the logical position is within this run.
*/
if (start <= posResolve->logicalIndex &&
start + subRunLength > posResolve->logicalIndex) {
/*
* If this run is only one character long, we have an easy case:
* the visual position is the x-coord of the start of the run
* less the x-coord of the start of the whole text.
*/
if (subRunLength == 1) {
posResolve->visualIndex = visualStart;
posResolve->visualLeftTwips = xOffset;
posResolve->visualWidth = width;
}
/*
* Otherwise, we need to measure the width of the run's part
* which is to the visual left of the index.
* In other words, the run is broken in two, around the logical index,
* and we measure the part which is visually left.
* If the run is right-to-left, this part will span from after the index
* up to the end of the run; if it is left-to-right, this part will span
* from the start of the run up to (and inclduing) the character before the index.
*/
else {
/*
* Here is a description of how the width of the current character
* (posResolve->visualWidth) is calculated:
*
* LTR (current char: "P"):
* S A M P L E (logical index: 3, visual index: 3)
* ^ (visualLeftPart)
* ^ (visualRightSide)
* visualLeftLength == 3
* ^^^^^^ (subWidth)
* ^^^^^^^^ (aprocessor.GetWidth() -- with visualRightSide)
* ^^ (posResolve->visualWidth)
*
* RTL (current char: "M"):
* E L P M A S (logical index: 2, visual index: 3)
* ^ (visualLeftPart)
* ^ (visualRightSide)
* visualLeftLength == 3
* ^^^^^^ (subWidth)
* ^^^^^^^^ (aprocessor.GetWidth() -- with visualRightSide)
* ^^ (posResolve->visualWidth)
*/
nscoord subWidth;
// The position in the text where this run's "left part" begins.
const PRUnichar* visualLeftPart, *visualRightSide;
if (level & 1) {
// One day, son, this could all be replaced with mBidiEngine.GetVisualIndex ...
posResolve->visualIndex = visualStart + (subRunLength - (posResolve->logicalIndex + 1 - start));
// Skipping to the "left part".
visualLeftPart = aText + posResolve->logicalIndex + 1;
// Skipping to the right side of the current character
visualRightSide = visualLeftPart - 1;
}
else {
posResolve->visualIndex = visualStart + (posResolve->logicalIndex - start);
// Skipping to the "left part".
visualLeftPart = aText + start;
// In LTR mode this is the same as visualLeftPart
visualRightSide = visualLeftPart;
}
// The delta between the start of the run and the left part's end.
PRInt32 visualLeftLength = posResolve->visualIndex - visualStart;
aprocessor.SetText(visualLeftPart, visualLeftLength, nsBidiDirection(level & 1));
subWidth = aprocessor.GetWidth();
aprocessor.SetText(visualRightSide, visualLeftLength + 1, nsBidiDirection(level & 1));
posResolve->visualLeftTwips = xOffset + subWidth;
posResolve->visualWidth = aprocessor.GetWidth() - subWidth;
}
}
}
if (!(level & 1)) {
xOffset += width;
}
--subRunCount;
start = lineOffset;
subRunLimit = typeLimit;
subRunLength = typeLimit - lineOffset;
} // while
if (level & 1) {
xOffset = xEndRun;
}
visualStart += length;
} // for
if (aWidth) {
*aWidth = totalWidth;
}
return NS_OK;
}
class NS_STACK_CLASS nsIRenderingContextBidiProcessor : public nsBidiPresUtils::BidiProcessor {
public:
nsIRenderingContextBidiProcessor(nsRenderingContext* aCtx,
nsRenderingContext* aTextRunConstructionContext,
const nsPoint& aPt)
: mCtx(aCtx), mTextRunConstructionContext(aTextRunConstructionContext), mPt(aPt) { }
~nsIRenderingContextBidiProcessor()
{
mCtx->SetTextRunRTL(false);
}
virtual void SetText(const PRUnichar* aText,
PRInt32 aLength,
nsBidiDirection aDirection)
{
mTextRunConstructionContext->SetTextRunRTL(aDirection==NSBIDI_RTL);
mText = aText;
mLength = aLength;
}
virtual nscoord GetWidth()
{
return mTextRunConstructionContext->GetWidth(mText, mLength);
}
virtual void DrawText(nscoord aXOffset,
nscoord)
{
mCtx->FontMetrics()->DrawString(mText, mLength, mPt.x + aXOffset, mPt.y,
mCtx, mTextRunConstructionContext);
}
private:
nsRenderingContext* mCtx;
nsRenderingContext* mTextRunConstructionContext;
nsPoint mPt;
const PRUnichar* mText;
PRInt32 mLength;
nsBidiDirection mDirection;
};
nsresult nsBidiPresUtils::ProcessTextForRenderingContext(const PRUnichar* aText,
PRInt32 aLength,
nsBidiDirection aBaseDirection,
nsPresContext* aPresContext,
nsRenderingContext& aRenderingContext,
nsRenderingContext& aTextRunConstructionContext,
Mode aMode,
nscoord aX,
nscoord aY,
nsBidiPositionResolve* aPosResolve,
PRInt32 aPosResolveCount,
nscoord* aWidth)
{
nsIRenderingContextBidiProcessor processor(&aRenderingContext, &aTextRunConstructionContext, nsPoint(aX, aY));
nsBidi bidiEngine;
return ProcessText(aText, aLength, aBaseDirection, aPresContext, processor,
aMode, aPosResolve, aPosResolveCount, aWidth, &bidiEngine);
}
/* static */
void nsBidiPresUtils::WriteReverse(const PRUnichar* aSrc,
PRUint32 aSrcLength,
PRUnichar* aDest)
{
PRUnichar* dest = aDest + aSrcLength;
mozilla::unicode::ClusterIterator iter(aSrc, aSrcLength);
while (!iter.AtEnd()) {
iter.Next();
for (const PRUnichar *cp = iter; cp > aSrc; ) {
// Here we rely on the fact that there are no non-BMP mirrored pairs
// currently in Unicode, so we don't need to look for surrogates
*--dest = mozilla::unicode::GetMirroredChar(*--cp);
}
aSrc = iter;
}
NS_ASSERTION(dest == aDest, "Whole string not copied");
}
/* static */
bool nsBidiPresUtils::WriteLogicalToVisual(const PRUnichar* aSrc,
PRUint32 aSrcLength,
PRUnichar* aDest,
nsBidiLevel aBaseDirection,
nsBidi* aBidiEngine)
{
const PRUnichar* src = aSrc;
nsresult rv = aBidiEngine->SetPara(src, aSrcLength, aBaseDirection, nsnull);
if (NS_FAILED(rv)) {
return false;
}
nsBidiDirection dir;
rv = aBidiEngine->GetDirection(&dir);
// NSBIDI_LTR returned from GetDirection means the whole text is LTR
if (NS_FAILED(rv) || dir == NSBIDI_LTR) {
return false;
}
PRInt32 runCount;
rv = aBidiEngine->CountRuns(&runCount);
if (NS_FAILED(rv)) {
return false;
}
PRInt32 runIndex, start, length;
PRUnichar* dest = aDest;
for (runIndex = 0; runIndex < runCount; ++runIndex) {
rv = aBidiEngine->GetVisualRun(runIndex, &start, &length, &dir);
if (NS_FAILED(rv)) {
return false;
}
src = aSrc + start;
if (dir == NSBIDI_RTL) {
WriteReverse(src, length, dest);
dest += length;
} else {
do {
NS_ASSERTION(src >= aSrc && src < aSrc + aSrcLength,
"logical index out of range");
NS_ASSERTION(dest < aDest + aSrcLength, "visual index out of range");
*(dest++) = *(src++);
} while (--length);
}
}
NS_ASSERTION(dest - aDest == aSrcLength, "whole string not copied");
return true;
}
void nsBidiPresUtils::CopyLogicalToVisual(const nsAString& aSource,
nsAString& aDest,
nsBidiLevel aBaseDirection,
bool aOverride)
{
aDest.SetLength(0);
PRUint32 srcLength = aSource.Length();
if (srcLength == 0)
return;
if (!EnsureStringLength(aDest, srcLength)) {
return;
}
nsAString::const_iterator fromBegin, fromEnd;
nsAString::iterator toBegin;
aSource.BeginReading(fromBegin);
aSource.EndReading(fromEnd);
aDest.BeginWriting(toBegin);
if (aOverride) {
if (aBaseDirection == NSBIDI_RTL) {
// no need to use the converter -- just copy the string in reverse order
WriteReverse(fromBegin.get(), srcLength, toBegin.get());
} else {
// if aOverride && aBaseDirection == NSBIDI_LTR, fall through to the
// simple copy
aDest.SetLength(0);
}
} else {
nsBidi bidiEngine;
if (!WriteLogicalToVisual(fromBegin.get(), srcLength, toBegin.get(),
aBaseDirection, &bidiEngine)) {
aDest.SetLength(0);
}
}
if (aDest.IsEmpty()) {
// Either there was an error or the source is unidirectional
// left-to-right. In either case, just copy source to dest.
CopyUnicodeTo(aSource.BeginReading(fromBegin), aSource.EndReading(fromEnd),
aDest);
}
}
#endif // IBMBIDI
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку