pjs/nsprpub/pr/include/prlog.h

254 строки
8.2 KiB
C

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape Portable Runtime (NSPR).
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#ifndef prlog_h___
#define prlog_h___
#include "prtypes.h"
PR_BEGIN_EXTERN_C
/*
** prlog.h -- Declare interfaces to NSPR's Logging service
**
** NSPR provides a logging service that is used by NSPR itself and is
** available to client programs.
**
** To use the service from a client program, you should create a
** PRLogModuleInfo structure by calling PR_NewLogModule(). After
** creating the LogModule, you can write to the log using the PR_LOG()
** macro.
**
** Initialization of the log service is handled by NSPR initialization.
**
** At execution time, you must enable the log service. To enable the
** log service, set the environment variable: NSPR_LOG_MODULES
** variable.
**
** NSPR_LOG_MODULES variable has the form:
**
** <moduleName>:<value>[, <moduleName>:<value>]*
**
** Where:
** <moduleName> is the name passed to PR_NewLogModule().
** <value> is a numeric constant, e.g. 5. This value is the maximum
** value of a log event, enumerated by PRLogModuleLevel, that you want
** written to the log.
**
** For example: to record all events of greater value than or equal to
** PR_LOG_ERROR for a LogModule names "gizmo", say:
**
** set NSPR_LOG_MODULES=gizmo:2
**
** Note that you must specify the numeric value of PR_LOG_ERROR.
**
** Special LogModule names are provided for controlling NSPR's log
** service at execution time. These controls should be set in the
** NSPR_LOG_MODULES environment variable at execution time to affect
** NSPR's log service for your application.
**
** The special LogModule "all" enables all LogModules. To enable all
** LogModule calls to PR_LOG(), say:
**
** set NSPR_LOG_MODULES=all:5
**
** The special LogModule name "sync" tells the NSPR log service to do
** unbuffered logging.
**
** The special LogModule name "bufsize:<size>" tells NSPR to set the
** log buffer to <size>.
**
** The environment variable NSPR_LOG_FILE specifies the log file to use
** unless the default of "stderr" is acceptable. For MS Windows
** systems, NSPR_LOG_FILE can be set to a special value: "WinDebug"
** (case sensitive). This value causes PR_LOG() output to be written
** using the Windows API OutputDebugString(). OutputDebugString()
** writes to the debugger window; some people find this helpful.
**
**
** To put log messages in your programs, use the PR_LOG macro:
**
** PR_LOG(<module>, <level>, (<printfString>, <args>*));
**
** Where <module> is the address of a PRLogModuleInfo structure, and
** <level> is one of the levels defined by the enumeration:
** PRLogModuleLevel. <args> is a printf() style of argument list. That
** is: (fmtstring, ...).
**
** Example:
**
** main() {
** PRIntn one = 1;
** PRLogModuleInfo * myLm = PR_NewLogModule("gizmo");
** PR_LOG( myLm, PR_LOG_ALWAYS, ("Log this! %d\n", one));
** return;
** }
**
** Note the use of printf() style arguments as the third agrument(s) to
** PR_LOG().
**
** After compiling and linking you application, set the environment:
**
** set NSPR_LOG_MODULES=gizmo:5
** set NSPR_LOG_FILE=logfile.txt
**
** When you execute your application, the string "Log this! 1" will be
** written to the file "logfile.txt".
**
** Note to NSPR engineers: a number of PRLogModuleInfo structures are
** defined and initialized in prinit.c. See this module for ideas on
** what to log where.
**
*/
typedef enum PRLogModuleLevel {
PR_LOG_NONE = 0, /* nothing */
PR_LOG_ALWAYS = 1, /* always printed */
PR_LOG_ERROR = 2, /* error messages */
PR_LOG_WARNING = 3, /* warning messages */
PR_LOG_DEBUG = 4, /* debug messages */
PR_LOG_NOTICE = PR_LOG_DEBUG, /* notice messages */
PR_LOG_WARN = PR_LOG_WARNING, /* warning messages */
PR_LOG_MIN = PR_LOG_DEBUG, /* minimal debugging messages */
PR_LOG_MAX = PR_LOG_DEBUG /* maximal debugging messages */
} PRLogModuleLevel;
/*
** One of these structures is created for each module that uses logging.
** "name" is the name of the module
** "level" is the debugging level selected for that module
*/
typedef struct PRLogModuleInfo {
const char *name;
PRLogModuleLevel level;
struct PRLogModuleInfo *next;
} PRLogModuleInfo;
/*
** Create a new log module.
*/
NSPR_API(PRLogModuleInfo*) PR_NewLogModule(const char *name);
/*
** Set the file to use for logging. Returns PR_FALSE if the file cannot
** be created
*/
NSPR_API(PRBool) PR_SetLogFile(const char *name);
/*
** Set the size of the logging buffer. If "buffer_size" is zero then the
** logging becomes "synchronous" (or unbuffered).
*/
NSPR_API(void) PR_SetLogBuffering(PRIntn buffer_size);
/*
** Print a string to the log. "fmt" is a PR_snprintf format type. All
** messages printed to the log are preceeded by the name of the thread
** and a time stamp. Also, the routine provides a missing newline if one
** is not provided.
*/
NSPR_API(void) PR_LogPrint(const char *fmt, ...);
/*
** Flush the log to its file.
*/
NSPR_API(void) PR_LogFlush(void);
NSPR_API(void) PR_Assert(const char *s, const char *file, PRIntn ln);
#if defined(DEBUG) || defined(FORCE_PR_LOG)
#define PR_LOGGING 1
#define PR_LOG_TEST(_module,_level) \
((_module)->level >= (_level))
/*
** Log something.
** "module" is the address of a PRLogModuleInfo structure
** "level" is the desired logging level
** "args" is a variable length list of arguments to print, in the following
** format: ("printf style format string", ...)
*/
#define PR_LOG(_module,_level,_args) \
PR_BEGIN_MACRO \
if (PR_LOG_TEST(_module,_level)) { \
PR_LogPrint _args; \
} \
PR_END_MACRO
#else /* defined(DEBUG) || defined(FORCE_PR_LOG) */
#undef PR_LOGGING
#define PR_LOG_TEST(module,level) 0
#define PR_LOG(module,level,args)
#endif /* defined(DEBUG) || defined(FORCE_PR_LOG) */
#ifndef NO_NSPR_10_SUPPORT
#ifdef PR_LOGGING
#define PR_LOG_BEGIN PR_LOG
#define PR_LOG_END PR_LOG
#define PR_LOG_DEFINE PR_NewLogModule
#else
#define PR_LOG_BEGIN(module,level,args)
#define PR_LOG_END(module,level,args)
#define PR_LOG_DEFINE(_name) NULL
#endif /* PR_LOGGING */
#endif /* NO_NSPR_10_SUPPORT */
#if defined(DEBUG) || defined(FORCE_PR_ASSERT)
#define PR_ASSERT(_expr) \
((_expr)?((void)0):PR_Assert(# _expr,__FILE__,__LINE__))
#define PR_NOT_REACHED(_reasonStr) \
PR_Assert(_reasonStr,__FILE__,__LINE__)
#else
#define PR_ASSERT(expr) ((void) 0)
#define PR_NOT_REACHED(reasonStr)
#endif /* defined(DEBUG) || defined(FORCE_PR_ASSERT) */
PR_END_EXTERN_C
#endif /* prlog_h___ */