pjs/nsprpub/config/arch.mk

279 строки
7.2 KiB
Makefile

#
# The contents of this file are subject to the Mozilla Public
# License Version 1.1 (the "License"); you may not use this file
# except in compliance with the License. You may obtain a copy of
# the License at http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS
# IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
# implied. See the License for the specific language governing
# rights and limitations under the License.
#
# The Original Code is the Netscape Portable Runtime (NSPR).
#
# The Initial Developer of the Original Code is Netscape
# Communications Corporation. Portions created by Netscape are
# Copyright (C) 1998-2000 Netscape Communications Corporation. All
# Rights Reserved.
#
# Contributor(s):
#
# Alternatively, the contents of this file may be used under the
# terms of the GNU General Public License Version 2 or later (the
# "GPL"), in which case the provisions of the GPL are applicable
# instead of those above. If you wish to allow use of your
# version of this file only under the terms of the GPL and not to
# allow others to use your version of this file under the MPL,
# indicate your decision by deleting the provisions above and
# replace them with the notice and other provisions required by
# the GPL. If you do not delete the provisions above, a recipient
# may use your version of this file under either the MPL or the
# GPL.
#
#######################################################################
# Master "Core Components" macros for getting the OS architecture #
#######################################################################
#
# Important internal static macros
#
OS_ARCH := $(subst /,_,$(shell uname -s))
OS_RELEASE := $(shell uname -r)
OS_TEST := $(shell uname -m)
#
# Tweak the default OS_ARCH and OS_RELEASE macros as needed.
#
ifeq ($(OS_ARCH),AIX)
OS_RELEASE := $(shell uname -v).$(shell uname -r)
endif
ifeq ($(OS_ARCH),BSD_386)
OS_ARCH := BSD_OS
endif
ifeq ($(OS_ARCH),dgux)
OS_ARCH := DGUX
endif
ifeq ($(OS_ARCH),IRIX64)
OS_ARCH := IRIX
endif
ifeq ($(OS_ARCH),UNIX_SV)
ifneq ($(findstring NCR,$(shell grep NCR /etc/bcheckrc | head -1 )),)
OS_ARCH := NCR
else
OS_ARCH := UNIXWARE
OS_RELEASE := $(shell uname -v)
endif
endif
ifeq ($(OS_ARCH),Mac OS)
OS_ARCH := Rhapsody
endif
ifeq ($(OS_ARCH),Darwin)
OS_ARCH := Rhapsody
endif
ifeq ($(OS_ARCH),ncr)
OS_ARCH := NCR
endif
# This is the only way to correctly determine the actual OS version on NCR boxes.
ifeq ($(OS_ARCH),NCR)
OS_RELEASE := $(shell awk '{print $$3}' /etc/.relid | sed 's/^\([0-9]\)\(.\)\(..\)\(.*\)$$/\2.\3/')
endif
ifeq ($(OS_ARCH),UNIX_System_V)
OS_ARCH := NEC
endif
ifneq (,$(findstring POSIX_for_OpenVMS,$(OS_ARCH)))
OS_ARCH := OpenVMS
CPU_ARCH := $(shell uname -Wh)
OS_RELEASE := $(shell uname -v)
endif
ifeq ($(OS_ARCH),QNX)
ifeq ($(OS_RELEASE),6.00)
OS_ARCH := NTO
OS_RELEASE := _$(OS_TEST)$(OS_RELEASE)
else
OS_RELEASE := $(shell uname -v | sed 's/^\([0-9]\)\([0-9]*\)$$/\1.\2/')
endif
endif
ifeq ($(OS_ARCH),SCO_SV)
OS_ARCH := SCOOS
OS_RELEASE := 5.0
endif
ifeq ($(OS_ARCH),SINIX-N)
OS_ARCH := SINIX
endif
ifeq ($(OS_ARCH),SINIX-Y)
OS_ARCH := SINIX
endif
ifeq ($(OS_ARCH),SINIX-Z)
OS_ARCH := SINIX
endif
# SINIX changes name to ReliantUNIX with 5.43
ifeq ($(OS_ARCH),ReliantUNIX-N)
OS_ARCH := SINIX
endif
ifeq ($(OS_ARCH),UnixWare)
OS_ARCH := UNIXWARE
OS_RELEASE := $(shell uname -v)
endif
#
# Handle FreeBSD 2.2-STABLE and Linux 2.0.30-osfmach3
#
ifeq (,$(filter-out Linux FreeBSD,$(OS_ARCH)))
OS_RELEASE := $(shell echo "$(OS_RELEASE)" | sed 's/-.*//')
endif
#
# Distinguish between OSF1 V4.0B and V4.0D
#
ifeq ($(OS_ARCH)$(OS_RELEASE),OSF1V4.0)
OS_VERSION := $(shell uname -v)
ifeq ($(OS_VERSION),564)
OS_RELEASE := V4.0B
endif
ifeq ($(OS_VERSION),878)
OS_RELEASE := V4.0D
endif
endif
#
# Handle uname variants for OS/2.
#
ifeq ($(OS_ARCH),OS_2)
OS_ARCH := OS2
OS_RELEASE := 4.0
endif
#######################################################################
# Master "Core Components" macros for getting the OS target #
#######################################################################
#
# Note: OS_TARGET should be specified on the command line for gmake.
# When OS_TARGET=WIN95 is specified, then a Windows 95 target is built.
# The difference between the Win95 target and the WinNT target is that
# the WinNT target uses Windows NT specific features not available
# in Windows 95. The Win95 target will run on Windows NT, but (supposedly)
# at lesser performance (the Win95 target uses threads; the WinNT target
# uses fibers).
#
# When OS_TARGET=WIN16 is specified, then a Windows 3.11 (16bit) target
# is built. See: win16_3.11.mk for lots more about the Win16 target.
#
# If OS_TARGET is not specified, it defaults to $(OS_ARCH), i.e., no
# cross-compilation.
#
#
# The following hack allows one to build on a WIN95 machine (as if
# s/he were cross-compiling on a WINNT host for a WIN95 target).
# It also accomodates for MKS's uname.exe. If you never intend
# to do development on a WIN95 machine, you don't need this hack.
#
ifeq ($(OS_ARCH),WIN95)
OS_ARCH := WINNT
OS_TARGET := WIN95
endif
ifeq ($(OS_ARCH),Windows_95)
OS_ARCH := Windows_NT
OS_TARGET := WIN95
endif
ifeq ($(OS_ARCH),CYGWIN_95-4.0)
OS_ARCH := CYGWIN_NT-4.0
OS_TARGET := WIN95
endif
ifeq ($(OS_ARCH),OS2)
OS_ARCH := OS2
OS_TARGET := OS2
endif
#
# On WIN32, we also define the variable CPU_ARCH.
#
ifeq ($(OS_ARCH), WINNT)
ifneq ($(subst /,_,$(shell uname -s)),OS_2)
CPU_ARCH := $(shell uname -p)
else
CPU_ARCH := $(shell uname -m)
endif
ifeq ($(CPU_ARCH),I386)
CPU_ARCH = x86
endif
else
#
# If uname -s returns "Windows_NT", we assume that we are using
# the uname.exe in MKS toolkit.
#
# The -r option of MKS uname only returns the major version number.
# So we need to use its -v option to get the minor version number.
# Moreover, it doesn't have the -p option, so we need to use uname -m.
#
ifeq ($(OS_ARCH), Windows_NT)
OS_ARCH = WINNT
OS_MINOR_RELEASE := $(shell uname -v)
ifeq ($(OS_MINOR_RELEASE),00)
OS_MINOR_RELEASE = 0
endif
OS_RELEASE := $(OS_RELEASE).$(OS_MINOR_RELEASE)
CPU_ARCH := $(shell uname -m)
#
# MKS's uname -m returns "586" on a Pentium machine.
#
ifneq (,$(findstring 86,$(CPU_ARCH)))
CPU_ARCH = x86
endif
else
#
# If uname -s returns "CYGWIN_NT-4.0", we assume that we are using
# the uname.exe in the Cygwin tools.
#
ifeq (CYGWIN_NT,$(findstring CYGWIN_NT,$(OS_ARCH)))
OS_RELEASE := $(patsubst CYGWIN_NT-%,%,$(OS_ARCH))
OS_ARCH = WINNT
CPU_ARCH := $(shell uname -m)
#
# Cygwin's uname -m returns "i686" on a Pentium Pro machine.
#
ifneq (,$(findstring 86,$(CPU_ARCH)))
CPU_ARCH = x86
endif
else
#
# Prior to the Beta 20 release, Cygwin was called GNU-Win32.
# If uname -s returns "CYGWIN32/NT", we assume that we are using
# the uname.exe in the GNU-Win32 tools.
#
ifeq ($(OS_ARCH), CYGWIN32_NT)
OS_ARCH = WINNT
CPU_ARCH := $(shell uname -m)
#
# GNU-Win32's uname -m returns "i686" on a Pentium Pro machine.
#
ifneq (,$(findstring 86,$(CPU_ARCH)))
CPU_ARCH = x86
endif
endif
endif
endif
endif
ifndef OS_TARGET
OS_TARGET := $(OS_ARCH)
endif
ifeq ($(OS_TARGET), WIN95)
OS_RELEASE := 4.0
endif
ifeq ($(OS_TARGET), WIN16)
OS_RELEASE :=
# OS_RELEASE := _3.11
endif
OS_CONFIG := $(OS_TARGET)$(OS_RELEASE)