pjs/tools/tests/viewer/mtbf/mtbf.cpp

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

/***************************************************************************************
 * MODULE NOTES -- MTBF -- Mean Time Between Failures
 * @update  gess 01/04/99
 * @update  cyeh 03/15/99
 *
 *  MTBF is a simple WinNT application that runs our viewer.exe remotely.
 *  After viewer crashes (inevitably) the total elapsed time is recorded, and send 
 *  in an HTML mail message to the appropriate recipient. By default, the message
 *  is sent to rickg, but you can cause it to be sent to anywhere you like.
 *
 *  Note: To compile this program using the existing project file, simply create a 
 *        subst drive on your system using s:\ as the root. Place this project 
 *        there as s:\mtbf. Of course, if this doesn't work for you, it's easy 
 *        to change since there's only one file in the whole project anyway.
 *
 *  Note: We depend on the availability of the blat.exe somewhere in your path.
 *        You can get your own copy of BLAT at http://gepasi.dbs.aber.ac.uk/softw/Blat.html.
 *
 ***************************************************************************************/

#include <iostream.h>
#include <fstream.h>
#include <process.h>
#include <stdlib.h>
#include <errno.h>
#include <time.h>
#include <stdio.h>
#include <string.h>
#include <direct.h>

const char* gStatus[]={"abnormally","normally"};

bool gSendMail=false;
const char* gDefDir="s:";
char  gMTBFDirectory[500]="";
char  gDirectory[10];
const char* gDefProgram="viewer.exe";
char  gProgram[500];

char  gSubject[]="\"Automated MTBF Report\"";
char  gRecipient[500]="rgess@san.rr.com";

char  gReportFilename[20]="report.html";
char  gReportPath[500]="";

const char* gURLFilename="urls.txt";
char  gURLPath[500];

int gLoop = 100;

void ExitWithError(const char* aMsg1,const char* aMsg2){
  cout << endl << "Error: " << aMsg1;
  if(aMsg2)
    cout<< " " << aMsg2;
  cout <<"."<< endl;
  cout << "Process terminated." << endl;
  exit(2000);
}

//-d 10 -f c:/apps/utils/urls.txt -m 
/**
 * 
 * @update	gess 01/04/99
 * @param 
 * @return
 */
void ComputeEXEDirectory(char* aProgramPath,char* anOutputFilename){
  char* thePtr=strrchr(aProgramPath,'\\');
  if(thePtr) {
    strcpy(anOutputFilename,aProgramPath);
    anOutputFilename[thePtr-aProgramPath+1]=0;
  }
  thePtr=strchr(anOutputFilename,'\\');
  while(thePtr) {
    *thePtr='/';
    thePtr=strchr(anOutputFilename,'\\');
  }
}

/**
 * 
 * @update	gess 01/04/99
 * @param 
 * @return
 */
void initializeSettings(int argc,char* argv[]){
  bool theURLFileIsValid=false;
  ComputeEXEDirectory(argv[0],gMTBFDirectory);
  sprintf(gReportPath,"%s%s",gMTBFDirectory,gReportFilename);
  sprintf(gURLPath,"%s%s",gMTBFDirectory,gURLFilename);

  for(int i=0;i<argc;i++){
    if(0==strnicmp(argv[i],"-f",2)){
      //determine which url file to use...
      strcpy(gURLPath, argv[i+1]);
      fstream in(gURLPath,ios::in);
      char buf[500];
      buf[0]=0;
      in>>buf;
      if(!buf[0]){
        ExitWithError("Unable to read the given URL file",gURLPath);
      }
      else {
	theURLFileIsValid=true;
      }
      
    }
    else if(0==strnicmp(argv[i],"-r",2)){
      //determine email recipient...
      strcpy(gRecipient,argv[i+1]);
      gSendMail=true;
    }
    else if(0==strnicmp(argv[i],"-l",2)){
      gLoop = atoi(argv[i+1]);
      if ((gLoop > 200) || (gLoop < 0))
        ExitWithError("Loop must be a positive value and less than 200", 0);
    }
  }
  if(!theURLFileIsValid)
    ExitWithError("You must provide a valid URL textfile",0);
}

/**
 * 
 * @update	gess 01/04/99
 * @param 
 * @return
 */
void PrintResultsAsHTML(ostream& aStream,time_t& aStart,time_t& aEnd,int aResult){
  time_t ltime;
  time( &ltime );

  //begin by dumping the MIME header...
/*
  aStream << "MIME-Version: 1.0" << endl;
  aStream << "Content-Type: text/html; charset=us-ascii" << endl;
  aStream << "Subject: Automated MTBF Report" << endl;
//  aStream << "To: rick@gessner.com rickg@netscape.com mozilla-layout@mozilla.org" << endl;
*/

  int total=aEnd-aStart;
  int mins=(aEnd-aStart)/60;
  char buffer[50];
  sprintf(buffer,"%i mins %i sec",mins,total%60);

  aStream << "Automated MTBF Report"<< endl;
  aStream <<  ctime(&ltime) << endl;
  aStream << "Running: "<< gDirectory << gProgram << endl;
  aStream << "Elapsed: "<< buffer << endl;
  aStream << "Exit: "<< gStatus[0==aResult] << endl;


}


/**
 * 
 * @update	gess 01/04/99
 * @param 
 * @return
 */
void PrintResults(ostream& aStream,time_t& aStart,time_t& aEnd,int aResult){
  time_t ltime;
  time( &ltime );

  aStream << "=========================================" << endl;
  aStream << "Gecko \"Mean Time Between Failure\" Report" << endl;
  aStream << "=========================================" << endl;
  aStream << "Date:    " << ctime( &ltime);
  aStream << "Running: " << gDirectory << gProgram << endl;
  aStream << "File:    " << gURLPath << endl;

  int total=aEnd-aStart;
  int mins=(aEnd-aStart)/60;
  aStream << "MTBF:    ";
    if(mins>0){
    aStream << mins << " min ";
  }
  const char* status[]={"abnormally","normally"};
  aStream << total%60 << " seconds" << endl;

  aStream << "Exit:  Program terminated " << status[0==aResult] << endl;
}


/**
 * 
 * @update	gess 01/04/99
 * @param 
 * @return
 */
bool getPath(char* aBuffer,const char* aFilename,int index){
  bool result=false;
  if(aFilename){
    int len=strlen(aFilename);
    if(len>0){
      int hit=0;
      int pos=len;
      while((hit<index) && (--pos>-1)){
        if((aFilename[pos]=='\\') || (aFilename[pos]=='/')){
          hit++;
        }//if
      }//while
      if(hit==index){
        strncpy(aBuffer,aFilename,pos);
        aBuffer[pos]=0;
        strcat(aBuffer,"\\cache");
        result=true;
      }
    }//if
  }//if
  return result;
}

/**
 * 
 * @update	gess 01/04/99
 * @param 
 * @return
 */
int main(int argc,char* argv[]) {

  int result=0;

  //result=system("sendmail -t -messagefile=s:/mtbf/msg.txt ");

  if(argc>1) {
/*
    char* theDir = getenv("moz_src");
    if(!theDir)
      theDir=getenv("homedrive");

    if(theDir)
      strcpy(gDirectory,theDir);
    else strcpy(gDirectory,gDefDir); 
*/
    strcpy(gProgram,gDefProgram);
    initializeSettings(argc,argv);

    // example for CTime::CTime
    time_t startTime;  // C run-time time (defined in <time.h>)
    time( &startTime ) ;  // Get the current time from the 

    char buffer[500];
    sprintf(buffer,"%s%s -f %s -r %d",gDirectory,gProgram,gURLPath,gLoop);
    result=system(buffer);

    time_t endTime;  // C run-time time (defined in <time.h>)
    time( &endTime ) ;  // Get the current time from system

    if(gSendMail) {
      {
        //Write the message out in html form... 
        fstream out(gReportPath,ios::out);
        PrintResultsAsHTML(out,startTime,endTime,result);
      }
      sprintf(buffer,"blat %s -s %s -t %s",gReportPath,gSubject,gRecipient);
      result=system(buffer);
    }
    else {
      cout << endl << endl;
      PrintResults(cout,startTime,endTime,result);
    }

    int err=errno;
    switch(errno){
      case E2BIG:
        cout << "too big" << endl; break;
      case EACCES:
        cout << "access" << endl; break;
      case EMFILE:
        cout << "file" << endl; break;
      case ENOENT:
        cout << "bad file or directory" << endl; break;
      case ENOEXEC:
        cout << "exec" << endl; break;
      case ENOMEM:
        cout << "no mem" << endl; break;
      default:
        break;
    }
  }
  else {
    printf("MTBF (Mean time between failures) version 1.1.\n");
    printf("This program requires BLAT.EXE, which you can find on the net.\n");
    printf("http://gepasi.dbs.aber.ac.uk/softw/Blat.html \n");
    printf("Optional arguments: \n");
    printf("  -f filename containing URL list\n");
    printf("  -r email recipient\n");
    printf("  -l loop # of times (default is 100, max is 200)\n");
  }
  return 0;
}