pjs/js/tests/bisect.sh

#!/bin/bash -e
# -*- Mode: Shell-script; tab-width: 4; indent-tabs-mode: nil; -*-

# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is Mozilla JavaScript Testing Utilities
#
# The Initial Developer of the Original Code is
# Mozilla Corporation.
# Portions created by the Initial Developer are Copyright (C) 2008
# the Initial Developer. All Rights Reserved.
#
# Contributor(s): Bob Clary <bclary@bclary.com>
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****

if [[ -z "$TEST_DIR" ]]; then
    cat <<EOF
`basename $0`: error

TEST_DIR, the location of the Sisyphus framework, 
is required to be set prior to calling this script.

EOF
    exit 2
fi

if [[ ! -e $TEST_DIR/bin/library.sh ]]; then
    cat <<EOF
TEST_DIR=$TEST_DIR"

This script requires the Sisyphus testing framework. Please
cvs check out the Sisyphys framework from mozilla/testing/sisyphus
and set the environment variable TEST_DIR to the directory where it
located.

EOF
    exit 2
fi

source $TEST_DIR/bin/library.sh

usage()
{
    cat <<EOF
usage: bisect.sh -p product -b branch -e extra\\
                   -T  buildtype \\
                   -t test \\
                   -S string \\
                   -G good -B bad \\
                   [-J javascriptoptions]

    variable            description
    ===============     ============================================================
    -p bisect_product     one of js, firefox
    -b bisect_branches    one of branches 1.8.0, 1.8.1, 1.9.0, 1.9.1, 1.9.2
    -e bisect_extra       optional. extra qualifier to pick build tree and mozconfig.
    -T bisect_buildtype   one of build types opt debug
    -t bisect_test        Test to be bisected.
    -S bisect_string      optional. String containing a regular expression which 
                          can be used to distinguish different failures for the given
                          test. The script will search the failure log for the pattern 
                          "\$bisect_test.*\$string" to determine if a test failure
                          matches the expected failure.
                          bisect_string can contain any extended regular expressions 
                          supported by egrep.
    -G bisect_good        For branches 1.8.0, 1.8.1, 1.9.0, date test passed
                          For branch 1.9.1 and later, revision test passed
    -B bisect_bad         For branches, 1.8.0, 1.8.1, 1.9.0 date test failed
                          For branch 1.9.1 and later, revision test failed. 

       If the good revision (test passed) occurred  prior to the bad revision 
       (test failed), the script will search for the first bad revision which 
       caused the test to regress.

       If the bad revision (test failed) occurred prior to the good revision 
       (test passed), the script will search for the first good revision which 
       fixed the failing test.

    -D By default, clobber builds will be used. For mercurial based builds
       on branch 1.9.1 and later, you may specify -D to use depends builds.
       This may achieve significant speed advantages by eliminating the need
       to perform clobber builds for each bisection.

    -J javascriptoptions  optional. Set JavaScript options:
         -Z n Set gczeal to n. Currently, only valid for 
              debug builds of Gecko 1.8.1.15, 1.9.0 and later.
         -z optional. use split objects in the shell.
         -j optional. use JIT in the shell. Only available on 1.9.1 and later
EOF

    exit 2
}

verbose=0

while getopts "p:b:T:e:t:S:G:B:J:D" optname;
do
    case $optname in
        p) bisect_product=$OPTARG;;
        b) bisect_branch=$OPTARG;;
        T) bisect_buildtype=$OPTARG;;
        e) bisect_extra="$OPTARG"
            bisect_extraflag="-e $OPTARG";;
        t) bisect_test="$OPTARG";;
        S) bisect_string="$OPTARG";;
        G) bisect_good="$OPTARG";;
        B) bisect_bad="$OPTARG";;
        J) javascriptoptions=$OPTARG;;
        D) bisect_depends=1;;
    esac
done

# javascriptoptions will be passed by environment to runtests.sh

if [[ -z "$bisect_product" || -z "$bisect_branch" || -z "$bisect_buildtype" || -z "$bisect_test" || -z "$bisect_good" || -z "$bisect_bad" ]]; then
    echo "bisect_product: $bisect_product, bisect_branch: $bisect_branch, bisect_buildtype: $bisect_buildtype, bisect_test: $bisect_test, bisect_good: $bisect_good, bisect_bad: $bisect_bad"
    usage
fi

OPTIND=1

eval source $TEST_DIR/bin/set-build-env.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype > /dev/null

# TEST_JSDIR must be set after set-build-env.sh is called
# on Windows since TEST_DIR can be modified in set-build-env.sh
# from the pure cygwin path /work/... to a the cygwin windows path
# /c/work/...
TEST_JSDIR=${TEST_JSDIR:-$TEST_DIR/tests/mozilla.org/js}

case $bisect_branch in
    1.8.*|1.9.0)

        #
        # binary search using CVS
        #

        # convert dates to seconds for ordering
        localgood=`dateparse.pl $bisect_good`
        localbad=`dateparse.pl $bisect_bad`

        # if good < bad, then we are searching for a regression, 
        # i.e. the first bad changeset 
        # if bad < good, then we are searching for a fix.
        # i.e. the first good changeset. so we reverse the nature
        # of good and bad.

        if (( $localgood < $localbad )); then
            cat <<EOF

searching for a regression between $bisect_good and $bisect_bad
the bisection is searching for the transition from test failure not found, to test failure found.

EOF

            searchtype="regression"
            bisect_start=$bisect_good
            bisect_stop=$bisect_bad
        else
            cat <<EOF

searching for a fix between $bisect_bad and $bisect_good
the bisection is searching for the transition from test failure found to test failure not found.

EOF

            searchtype="fix"
            bisect_start=$bisect_bad
            bisect_stop=$bisect_good
        fi

        let seconds_start="`dateparse.pl $bisect_start`"
        let seconds_stop="`dateparse.pl $bisect_stop`"

        echo "checking that the test fails in the bad revision $bisect_bad"
        eval $TEST_DIR/bin/builder.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype -B "clobber" > /dev/null
        export MOZ_CO_DATE="$bisect_bad"
        eval $TEST_DIR/bin/builder.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype -B "checkout" > /dev/null
        bisect_log=`eval $TEST_JSDIR/runtests.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype -I $bisect_test -B "build" -c -t -X /dev/null 2>&1 | grep '_js.log $' | sed 's|log: \([^ ]*\) |\1|'`
        if [[ -z "$bisect_log" ]]; then
            echo "test $bisect_test not run."
        else
            if egrep -q "$bisect_test.*$bisect_string" ${bisect_log}-results-failures.log; then 
                echo "test failure $bisect_test.*$bisect_string found, bad revision $bisect_bad confirmed"
                bad_confirmed=1
            else 
                echo "test failure $bisect_test.*$bisect_string not found, bad revision $bisect_bad *not* confirmed"
            fi
        fi

        if [[ "$bad_confirmed" != "1" ]]; then
            error "bad revision not confirmed";
        fi
        
        echo "checking that the test passes in the good revision $bisect_good"
        eval $TEST_DIR/bin/builder.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype -B "clobber" > /dev/null
        export MOZ_CO_DATE="$bisect_good"
        eval $TEST_DIR/bin/builder.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype -B "checkout" > /dev/null

        bisect_log=`eval $TEST_JSDIR/runtests.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype -I $bisect_test -B "build" -c -t -X /dev/null 2>&1 | grep '_js.log $' | sed 's|log: \([^ ]*\) |\1|'`
        if [[ -z "$bisect_log" ]]; then
            echo "test $bisect_test not run."
        else
            if egrep -q "$bisect_test.*$bisect_string" ${bisect_log}-results-failures.log; then 
                echo "test failure $bisect_test.*$bisect_string found, good revision $bisect_good *not* confirmed"
            else 
                echo "test failure $bisect_test.*$bisect_string not found, good revision $bisect_good confirmed"
                good_confirmed=1
            fi
        fi

        if [[ "$good_confirmed" != "1" ]]; then
            error "good revision not confirmed";
        fi
        
        echo "bisecting $bisect_start to $bisect_stop"

        # 
        # place an array of dates of checkins into an array and
        # perform a binary search on those dates.
        #
        declare -a seconds_array date_array

        # load the cvs checkin dates into an array. the array will look like
        # date_array[i] date value
        # date_array[i+1] time value

        pushd $BUILDTREE/mozilla
        date_array=(`cvs -q -z3 log -N -d "$bisect_start<$bisect_stop" | grep "^date: " | sed 's|^date: \([^;]*\).*|\1|' | sort -u`)
        popd

        let seconds_index=0 1
        let date_index=0 1

        while (( $date_index < ${#date_array[@]} )); do
            seconds_array[$seconds_index]=`dateparse.pl "${date_array[$date_index]} ${date_array[$date_index+1]} UTC"`
            let seconds_index=$seconds_index+1
            let date_index=$date_index+2
        done

        let seconds_index_start=0 1
        let seconds_index_stop=${#seconds_array[@]}

        while true; do

            if (( $seconds_index_start+1 >= $seconds_index_stop )); then
                echo "*** date `perl -e 'print scalar localtime $ARGV[0];' ${seconds_array[$seconds_index_stop]}` found ***"
                break;
            fi

            unset result

            # clobber before setting new changeset.
            eval $TEST_DIR/bin/builder.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype -B "clobber" > /dev/null

            let seconds_index_middle="($seconds_index_start + $seconds_index_stop)/2"
            let seconds_middle="${seconds_array[$seconds_index_middle]}"

            bisect_middle="`perl -e 'print scalar localtime $ARGV[0];' $seconds_middle`"
            export MOZ_CO_DATE="$bisect_middle"
            echo "testing $MOZ_CO_DATE"

            eval $TEST_DIR/bin/builder.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype -B "checkout" > /dev/null

            bisect_log=`eval $TEST_JSDIR/runtests.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype -I $bisect_test -B "build" -c -t -X /dev/null 2>&1 | grep '_js.log $' | sed 's|log: \([^ ]*\) |\1|'`
            if [[ -z "$bisect_log" ]]; then
                echo "test $bisect_test not run. Skipping changeset"
                let seconds_index_start=$seconds_index_start+1
            else
                if [[ "$searchtype" == "regression" ]]; then
                    # searching for a regression, pass -> fail
                    if egrep -q "$bisect_test.*$bisect_string" ${bisect_log}-results-failures.log; then 
                        echo "test failure $bisect_test.*$bisect_string found"
                        let seconds_index_stop=$seconds_index_middle;
                    else 
                        echo "test failure $bisect_test.*$bisect_string not found"
                        let seconds_index_start=$seconds_index_middle
                    fi
                else
                    # searching for a fix, fail -> pass
                    if egrep -q "$bisect_test.*$bisect_string" ${bisect_log}-results-failures.log; then 
                        echo "test failure $bisect_test.*$bisect_string found"
                        let seconds_index_start=$seconds_index_middle
                    else 
                        echo "test failure $bisect_test.*$bisect_string not found"
                        let seconds_index_stop=$seconds_index_middle
                    fi
                fi
            fi

        done
        ;;

    1.9.1|1.9.2)
        #
        # binary search using mercurial
        #

        TEST_MOZILLA_HG_LOCAL=${TEST_MOZILLA_HG_LOCAL:-$BUILDDIR/hg.mozilla.org/`basename $TEST_MOZILLA_HG`}
        hg -R $TEST_MOZILLA_HG_LOCAL pull -r tip

        REPO=$BUILDTREE/mozilla
        hg -R $REPO pull -r tip

        # convert revision numbers to local revision numbers for ordering
        localgood=`hg -R $REPO id -n -r $bisect_good`
        localbad=`hg -R $REPO id -n -r $bisect_bad`

        # if good < bad, then we are searching for a regression, 
        # i.e. the first bad changeset 
        # if bad < good, then we are searching for a fix.
        # i.e. the first good changeset. so we reverse the nature
        # of good and bad.

        if (( $localgood < $localbad )); then
            cat <<EOF

searching for a regression between $localgood:$bisect_good and $localbad:$bisect_bad
the result is considered good when the test result does not appear in the failure log, bad otherwise.
the bisection is searching for the transition from test failure not found, to test failure found.

EOF

            searchtype="regression"
            bisect_start=$bisect_good
            bisect_stop=$bisect_bad
        else
            cat <<EOF

searching for a fix between $localbad:$bisect_bad and $localgood:$bisect_good
the result is considered good when the test result does appear in the failure log, bad otherwise.
the bisection is searching for the transition from test failure found to test failure not found.

EOF

            searchtype="fix"
            bisect_start=$bisect_bad
            bisect_stop=$bisect_good
        fi

        echo "checking that the test fails in the bad revision $localbad:$bisect_bad"
        if [[ -z "$bisect_depends" ]]; then
            eval $TEST_DIR/bin/builder.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype -B "clobber" > /dev/null
        fi
        hg -R $REPO update -C -r $bisect_bad
        bisect_log=`eval $TEST_JSDIR/runtests.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype -I $bisect_test -B "build" -c -t -X /dev/null 2>&1 | grep '_js.log $' | sed 's|log: \([^ ]*\) |\1|'`
        if [[ -z "$bisect_log" ]]; then
            echo "test $bisect_test not run."
        else
            if egrep -q "$bisect_test.*$bisect_string" ${bisect_log}-results-failures.log; then 
                echo "test failure $bisect_test.*$bisect_string found, bad revision $localbad:$bisect_bad confirmed"
                bad_confirmed=1
            else 
                echo "test failure $bisect_test.*$bisect_string not found, bad revision $localbad:$bisect_bad *not* confirmed"
            fi
        fi

        if [[ "$bad_confirmed" != "1" ]]; then
            error "bad revision not confirmed";
        fi
        
        echo "checking that the test passes in the good revision $localgood:$bisect_good"
        if [[ -z "$bisect_depends" ]]; then
            eval $TEST_DIR/bin/builder.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype -B "clobber" > /dev/null
        fi
        hg -R $REPO update -C -r $bisect_good
        bisect_log=`eval $TEST_JSDIR/runtests.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype -I $bisect_test -B "build" -c -t -X /dev/null 2>&1 | grep '_js.log $' | sed 's|log: \([^ ]*\) |\1|'`
        if [[ -z "$bisect_log" ]]; then
            echo "test $bisect_test not run."
        else
            if egrep -q "$bisect_test.*$bisect_string" ${bisect_log}-results-failures.log; then 
                echo "test failure $bisect_test.*$bisect_string found, good revision $localgood:$bisect_good *not* confirmed"
            else 
                echo "test failure $bisect_test.*$bisect_string not found, good revision $localgood:$bisect_good confirmed"
                good_confirmed=1
            fi
        fi

        if [[ "$good_confirmed" != "1" ]]; then
            error "good revision not confirmed";
        fi
        
        echo "bisecting $REPO $bisect_start to $bisect_stop"
        hg -q -R $REPO bisect --reset
        hg -q -R $REPO bisect --good $bisect_start
        hg -q -R $REPO bisect --bad $bisect_stop

        while true; do
            unset result

            # clobber before setting new changeset.
            if [[ -z "$bisect_depends" ]]; then
                eval $TEST_DIR/bin/builder.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype -B "clobber" > /dev/null
            fi

            # remove extraneous in-tree changes
            # nsprpub/configure I'm looking at you!
            hg -R $REPO update -C

            hg -R $REPO bisect
            # save the revision id so we can update to it discarding local
            # changes in the working directory.
            rev=`hg -R $REPO id -i`

            bisect_log=`eval $TEST_JSDIR/runtests.sh -p $bisect_product -b $bisect_branch $bisect_extraflag -T $bisect_buildtype -I $bisect_test -B "build" -c -t -X /dev/null 2>&1 | grep '_js.log $' | sed 's|log: \([^ ]*\) |\1|'`
            # remove extraneous in-tree changes
            # nsprpub/configure I'm looking at you!
            hg -R $REPO update -C -r $rev

            if [[ -z "$bisect_log" ]]; then
                echo "test $bisect_test not run. Skipping changeset"
                hg -R $REPO bisect --skip
            else
                if [[ "$searchtype" == "regression" ]]; then
                    # searching for a regression
                    # the result is considered good when the test does not appear in the failure log
                    if egrep -q "$bisect_test.*$bisect_string" ${bisect_log}-results-failures.log; then 
                        echo "test failure $bisect_test.*$bisect_string found, marking revision bad"
                        if ! result=`hg -R $REPO bisect --bad 2>&1`; then
                            echo "bisect bad failed"
                            error "$result"
                        fi
                    else 
                        echo "test failure $bisect_test.*$bisect_string not found, marking revision good"
                        if ! result=`hg -R $REPO bisect --good 2>&1`; then
                            echo "bisect good failed"
                            error "$result"
                        fi
                    fi
                else
                    # searching for a fix
                    # the result is considered good when the test does appear in the failure log
                    if egrep -q "$bisect_test.*$bisect_string" ${bisect_log}-results-failures.log; then 
                        echo "test failure $bisect_test.*$bisect_string found, marking revision good"
                        if ! result=`hg -R $REPO bisect --good 2>&1`; then
                            echo "bisect good failed"
                            error "$result"
                        fi
                    else 
                        echo "test failure $bisect_test.*$bisect_string not found, marking revision bad"
                        if ! result=`hg -R $REPO bisect --bad 2>&1`; then
                            echo "bisect bad failed"
                            error "$result"
                        fi
                    fi
                fi
            fi

            if echo $result | egrep -q "The first (good|bad) revision is:"; then 
                result_revision=`echo $result | sed "s|The first .* revision is:.*changeset: [0-9]*:\([^ ]*\).*|\1|"`
                echo $result | sed "s|The first .* revision is:|$searchtype|"
                echo "*** revision $result_revision found ***"
                break
            fi

        done
        ;;
esac