mozilla
/
pjs
зеркало из https://github.com/mozilla/pjs.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
pjs/layout/generic/nsBlockFrame.cpp

2133 строки
69 KiB
C++
Исходник Ответственный История

/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
#include "nsBlockFrame.h"
#include "nsSize.h"
#include "nsIAnchoredItems.h"
#include "nsIContent.h"
#include "nsIContentDelegate.h"
#include "nsISpaceManager.h"
#include "nsIStyleContext.h"
#include "nsStyleConsts.h"
#include "nsIPresContext.h"
#include "nsMargin.h"
#include "nsHTMLIIDs.h"
#include "nsCSSLayout.h"
#include "nsCRT.h"
#include "nsIPresShell.h"
#include "nsReflowCommand.h"
#include "nsPlaceholderFrame.h"
#include "nsHTMLAtoms.h"
#include "nsHTMLValue.h"
#include "nsIHTMLContent.h"
#ifdef NS_DEBUG
#undef NOISY
#undef NOISY_FLOW
#else
#undef NOISY
#undef NOISY_FLOW
#endif
static NS_DEFINE_IID(kIRunaroundIID, NS_IRUNAROUND_IID);
static NS_DEFINE_IID(kIFloaterContainerIID, NS_IFLOATERCONTAINER_IID);
static NS_DEFINE_IID(kIAnchoredItemsIID, NS_IANCHOREDITEMS_IID);
static NS_DEFINE_IID(kStyleMoleculeSID, NS_STYLEMOLECULE_SID);
static NS_DEFINE_IID(kStyleFontSID, NS_STYLEFONT_SID);
struct BlockBandData : public nsBandData {
nsRect data[5];
BlockBandData() {size = 5; rects = data;}
};
// XXX Bugs
// 1. right to left reflow can generate negative x coordinates.
// XXX Speedup idea (all containers)
// If I reflow a child and it gives back not-complete status then
// there is no sense in trying to pullup children. For blocks, it's a
// little more complicated unless the child is a block - if the child
// is a block, then we must be out of room hence we should stop. If
// the child is not a block then our line should be flushed (see #2
// below) if our line is already empty then we must be out of room.
// For inline frames and column frames, if we reflow a child and get
// back not-complete status then we should bail immediately because we
// are out of room.
// XXX Speedup ideas:
// 1. change pullup code to use line information from next in flow
// 2. we can advance to next line immediately after reflowing something
// and noticing that it's not complete.
// 3. pass down last child information in aState so that pullup, etc.,
// don't need to recompute it
// XXX TODO:
// 0. Move justification into line flushing code
// 1. To get ebina margins I need "auto" information from the style
// system margin's. A bottom/top margin of auto will then be computed like
// ebina computes it [however the heck that is].
// 2. kicking out floaters and talking with floater container to adjust
// left and right margins
nsBlockReflowState::nsBlockReflowState()
{
}
void nsBlockReflowState::Init(const nsSize& aMaxSize,
nsSize* aMaxElementSize,
nsStyleFont* aFont,
nsStyleMolecule* aMol,
nsISpaceManager* aSpaceManager)
{
firstLine = PR_TRUE;
allowLeadingWhitespace = PR_FALSE;
breakAfterChild = PR_FALSE;
breakBeforeChild = PR_FALSE;
firstChildIsInsideBullet = PR_FALSE;
nextListOrdinal = -1;
column = 0;
spaceManager = aSpaceManager;
currentBand = new BlockBandData;
font = aFont;
mol = aMol;
availSize.width = aMaxSize.width;
availSize.height = aMaxSize.height;
maxElementSize = aMaxElementSize;
if (nsnull != aMaxElementSize) {
aMaxElementSize->width = 0;
aMaxElementSize->height = 0;
}
kidXMost = 0;
x = 0;
y = 0;
isInline = PR_FALSE;
currentLineNumber = 0;
lineStart = nsnull;
lineLength = 0;
ascents = ascentBuf;
maxAscent = 0;
maxDescent = 0;
lineWidth = 0;
maxPosBottomMargin = 0;
maxNegBottomMargin = 0;
lineMaxElementSize.width = 0;
lineMaxElementSize.height = 0;
lastContentIsComplete = PR_TRUE;
maxAscents = sizeof(ascentBuf) / sizeof(ascentBuf[0]);
needRelativePos = PR_FALSE;
prevLineLastFrame = nsnull;
prevLineHeight = 0;
topMargin = 0;
prevMaxPosBottomMargin = 0;
prevMaxNegBottomMargin = 0;
prevLineLastContentIsComplete = PR_TRUE;
unconstrainedWidth = PRBool(aMaxSize.width == NS_UNCONSTRAINEDSIZE);
unconstrainedHeight = PRBool(aMaxSize.height == NS_UNCONSTRAINEDSIZE);
justifying = (NS_STYLE_TEXT_ALIGN_JUSTIFY == mol->textAlign) &&
(NS_STYLE_WHITESPACE_PRE != mol->whiteSpace);
reflowStatus = nsIFrame::frNotComplete;
}
nsBlockReflowState::~nsBlockReflowState()
{
if (ascents != ascentBuf) {
delete ascents;
}
delete currentBand;
}
void nsBlockReflowState::AddAscent(nscoord aAscent)
{
NS_PRECONDITION(lineLength <= maxAscents, "bad line length");
if (lineLength == maxAscents) {
maxAscents *= 2;
nscoord* newAscents = new nscoord[maxAscents];
if (nsnull != newAscents) {
nsCRT::memcpy(newAscents, ascents, sizeof(nscoord) * lineLength);
if (ascents != ascentBuf) {
delete ascents;
}
ascents = newAscents;
} else {
// Yikes! Out of memory!
return;
}
}
ascents[lineLength] = aAscent;
}
void nsBlockReflowState::AdvanceToNextLine(nsIFrame* aPrevLineLastFrame,
nscoord aPrevLineHeight)
{
firstLine = PR_FALSE;
allowLeadingWhitespace = PR_FALSE;
column = 0;
breakAfterChild = PR_FALSE;
breakBeforeChild = PR_FALSE;
lineStart = nsnull;
lineLength = 0;
currentLineNumber++;
maxAscent = 0;
maxDescent = 0;
lineWidth = 0;
needRelativePos = PR_FALSE;
prevLineLastFrame = aPrevLineLastFrame;
prevLineHeight = aPrevLineHeight;
prevMaxPosBottomMargin = maxPosBottomMargin;
prevMaxNegBottomMargin = maxNegBottomMargin;
// Remember previous line's lastContentIsComplete
prevLineLastContentIsComplete = lastContentIsComplete;
lastContentIsComplete = PR_TRUE;
topMargin = 0;
maxPosBottomMargin = 0;
maxNegBottomMargin = 0;
}
#ifdef NS_DEBUG
void nsBlockReflowState::DumpLine()
{
nsIFrame* f = lineStart;
PRInt32 ll = lineLength;
while (--ll >= 0) {
printf(" ");
((nsFrame*)f)->ListTag(stdout);/* XXX */
printf("\n");
f->GetNextSibling(f);
}
}
void nsBlockReflowState::DumpList()
{
nsIFrame* f = lineStart;
while (nsnull != f) {
printf(" ");
((nsFrame*)f)->ListTag(stdout);/* XXX */
printf("\n");
f->GetNextSibling(f);
}
}
#endif
//----------------------------------------------------------------------
nsresult nsBlockFrame::NewFrame(nsIFrame** aInstancePtrResult,
nsIContent* aContent,
PRInt32 aIndexInParent,
nsIFrame* aParent)
{
NS_PRECONDITION(nsnull != aInstancePtrResult, "null ptr");
if (nsnull == aInstancePtrResult) {
return NS_ERROR_NULL_POINTER;
}
nsIFrame* it = new nsBlockFrame(aContent, aIndexInParent, aParent);
if (nsnull == it) {
return NS_ERROR_OUT_OF_MEMORY;
}
*aInstancePtrResult = it;
return NS_OK;
}
nsBlockFrame::nsBlockFrame(nsIContent* aContent,
PRInt32 aIndexInParent,
nsIFrame* aParent)
: nsHTMLContainerFrame(aContent, aIndexInParent, aParent)
{
}
nsBlockFrame::~nsBlockFrame()
{
if (nsnull != mLines) {
delete mLines;
}
}
nsresult
nsBlockFrame::QueryInterface(const nsIID& aIID, void** aInstancePtr)
{
NS_PRECONDITION(0 != aInstancePtr, "null ptr");
if (NULL == aInstancePtr) {
return NS_ERROR_NULL_POINTER;
}
if (aIID.Equals(kIHTMLFrameTypeIID)) {
*aInstancePtr = (void*) ((nsIHTMLFrameType*) this);
return NS_OK;
} else if (aIID.Equals(kIRunaroundIID)) {
*aInstancePtr = (void*) ((nsIRunaround*) this);
return NS_OK;
} else if (aIID.Equals(kIFloaterContainerIID)) {
*aInstancePtr = (void*) ((nsIFloaterContainer*) this);
return NS_OK;
}
return nsHTMLContainerFrame::QueryInterface(aIID, aInstancePtr);
}
// Computes the top margin to use for this child frames based on its display
// type and the display type of the previous child frame.
//
// Adjacent vertical margins between block-level elements are collapsed.
nscoord nsBlockFrame::GetTopMarginFor(nsIPresContext* aCX,
nsBlockReflowState& aState,
nsIFrame* aKidFrame,
nsStyleMolecule* aKidMol,
PRBool aIsInline)
{
if (aIsInline) {
// Just use whatever the previous bottom margin was
return aState.prevMaxPosBottomMargin - aState.prevMaxNegBottomMargin;
} else {
// Does the frame have a prev-in-flow?
nsIFrame* kidPrevInFlow;
aKidFrame->GetPrevInFlow(kidPrevInFlow);
if (nsnull == kidPrevInFlow) {
nscoord maxNegTopMargin = 0;
nscoord maxPosTopMargin = 0;
if (aKidMol->margin.top < 0) {
maxNegTopMargin = -aKidMol->margin.top;
} else {
maxPosTopMargin = aKidMol->margin.top;
}
nscoord maxPos = PR_MAX(aState.prevMaxPosBottomMargin, maxPosTopMargin);
nscoord maxNeg = PR_MAX(aState.prevMaxNegBottomMargin, maxNegTopMargin);
return maxPos - maxNeg;
} else {
return 0;
}
}
}
void nsBlockFrame::PlaceBelowCurrentLineFloaters(nsIPresContext* aCX,
nsBlockReflowState& aState,
nscoord aY)
{
NS_PRECONDITION(aState.floaterToDo.Count() > 0, "no floaters");
// XXX Factor this code with PlaceFloater()...
PRInt32 numFloaters = aState.floaterToDo.Count();
for (PRInt32 i = 0; i < numFloaters; i++) {
nsIFrame* floater = (nsIFrame*)aState.floaterToDo[i];
nsRect region;
// Get the band of available space
// XXX This is inefficient to do this inside the loop...
GetAvailableSpaceBand(aState, aY);
// Get the type of floater
nsIStyleContext* styleContext;
floater->GetStyleContext(aCX, styleContext);
nsStyleMolecule* mol = (nsStyleMolecule*)styleContext->GetData(kStyleMoleculeSID);
NS_RELEASE(styleContext);
floater->GetRect(region);
region.y = mCurrentState->currentBand->rects[0].y;
if (NS_STYLE_FLOAT_LEFT == mol->floats) {
region.x = mCurrentState->currentBand->rects[0].x;
} else {
NS_ASSERTION(NS_STYLE_FLOAT_RIGHT == mol->floats, "bad float type");
region.x = mCurrentState->currentBand->rects[0].XMost() - region.width;
}
// XXX Don't forget the floater's margins...
mCurrentState->spaceManager->Translate(mCurrentState->borderPadding.left, 0);
mCurrentState->spaceManager->AddRectRegion(region);
// Set the origin of the floater in world coordinates
nscoord worldX, worldY;
mCurrentState->spaceManager->GetTranslation(worldX, worldY);
floater->MoveTo(region.x + worldX, region.y + worldY);
mCurrentState->spaceManager->Translate(-mCurrentState->borderPadding.left, 0);
}
aState.floaterToDo.Clear();
}
/**
* Flush a line out. Return true if the line fits in our available
* height. If the line does not fit then return false. When the line
* fits we advance the y coordinate, reset the x coordinate and
* prepare the nsBlockReflowState for the next line.
*/
PRBool nsBlockFrame::AdvanceToNextLine(nsIPresContext* aCX,
nsBlockReflowState& aState)
{
NS_PRECONDITION(aState.lineLength > 0, "bad line");
NS_PRECONDITION(nsnull != aState.lineStart, "bad line");
nscoord y = aState.y + aState.topMargin;
nscoord lineHeight;
if (aState.isInline) {
// Vertically align the children on this line, returning the height of
// the line upon completion.
lineHeight = nsCSSLayout::VerticallyAlignChildren(aCX, this, aState.font, y,
aState.lineStart, aState.lineLength,
aState.ascents, aState.maxAscent);
// Any below current line floaters to place?
if (aState.floaterToDo.Count() > 0) {
PlaceBelowCurrentLineFloaters(aCX, aState, y + lineHeight);
// XXX Factor in the height of the floaters as well when considering
// whether the line fits.
// The default policy is that if there isn't room for the floaters then
// both the line and the floaters are pushed to the next-in-flow...
}
} else {
nsSize size;
aState.lineStart->GetSize(size);
lineHeight = size.height;
}
// The first line always fits
if (aState.currentLineNumber > 0) {
nscoord yb = aState.borderPadding.top + aState.availSize.height;
if (y + lineHeight > yb) {
// After vertical alignment of the children and factoring in the
// proper margin, the line doesn't fit.
return PR_FALSE;
}
}
if (aState.isInline) {
// Check if the right-edge of the line exceeds our running x-most
nscoord xMost = aState.borderPadding.left + aState.lineWidth;
if (xMost > aState.kidXMost) {
aState.kidXMost = xMost;
}
}
// Advance the y coordinate to the new position where the next
// line or block element will go.
aState.y = y + lineHeight;
aState.x = 0;
// Now that the vertical alignment is done we can perform horizontal
// alignment and relative positioning. Skip all of these if we are
// doing an unconstrained (in x) reflow. There's no point in doing
// the work if we *know* we are going to reflowed again.
if (!aState.unconstrainedWidth) {
nsCSSLayout::HorizontallyPlaceChildren(aCX, this, aState.mol,
aState.lineStart, aState.lineLength,
aState.lineWidth,
aState.availSize.width);
// Finally, now that the in-flow positions of the line's frames are
// known we can apply relative positioning if any of them need it.
if (!aState.justifying) {
nsCSSLayout::RelativePositionChildren(aCX, this, aState.mol,
aState.lineStart,
aState.lineLength);
}
}
// Record line length
aState.lineLengths.AppendElement((void*)aState.lineLength);
// Find the last frame in the line
// XXX keep this as running state in the nsBlockReflowState
nsIFrame* lastFrame = aState.lineStart;
PRInt32 lineLen = aState.lineLength - 1;
while (--lineLen >= 0) {
lastFrame->GetNextSibling(lastFrame);
}
// Update maxElementSize
if (nsnull != aState.maxElementSize) {
nsSize& lineMax = aState.lineMaxElementSize;
nsSize* maxMax = aState.maxElementSize;
if (lineMax.width > maxMax->width) {
maxMax->width = lineMax.width;
}
if (lineMax.height > maxMax->height) {
maxMax->height = lineMax.height;
}
aState.lineMaxElementSize.width = 0;
aState.lineMaxElementSize.height = 0;
}
// Advance to the next line
aState.AdvanceToNextLine(lastFrame, lineHeight);
return PR_TRUE;
}
/**
* Add an inline child to the current line. Advance various running
* values after placement.
*/
void nsBlockFrame::AddInlineChildToLine(nsIPresContext* aCX,
nsBlockReflowState& aState,
nsIFrame* aKidFrame,
nsReflowMetrics& aKidSize,
nsSize* aKidMaxElementSize,
nsStyleMolecule* aKidMol)
{
NS_PRECONDITION(nsnull != aState.lineStart, "bad line");
PRIntn direction = aState.mol->direction;
if (NS_STYLE_POSITION_RELATIVE == aKidMol->positionFlags) {
aState.needRelativePos = PR_TRUE;
}
// Place and size the child
// XXX add in left margin from kid
nsRect r;
r.y = aState.y;
r.width = aKidSize.width;
r.height = aKidSize.height;
if (NS_STYLE_DIRECTION_LTR == aState.mol->direction) {
// Left to right positioning.
r.x = aState.borderPadding.left + aState.x + aKidMol->margin.left;
aState.x += aKidSize.width + aKidMol->margin.left + aKidMol->margin.right;
} else {
// Right to left positioning
// XXX what should we do when aState.x goes negative???
r.x = aState.x - aState.borderPadding.right - aKidMol->margin.right - aKidSize.width;
aState.x -= aKidSize.width + aKidMol->margin.right + aKidMol->margin.left;
}
aKidFrame->SetRect(r);
aState.AddAscent(aKidSize.ascent);
aState.lineWidth += aKidSize.width;
aState.lineLength++;
// Update maximums for the line
if (aKidSize.ascent > aState.maxAscent) {
aState.maxAscent = aKidSize.ascent;
}
if (aKidSize.descent > aState.maxDescent) {
aState.maxDescent = aKidSize.descent;
}
// Update running margin maximums
if (aState.firstChildIsInsideBullet && (aKidFrame == mFirstChild)) {
// XXX temporary code. Since the molecule for the bullet frame
// is the same as the LI frame, we get bad style information.
// ignore it.
} else {
nscoord margin;
#if 0
// XXX CSS2 spec says that top/bottom margin don't affect line height
// calculation. We're waiting for clarification on this issue...
if ((margin = aKidMol->margin.top) < 0) {
margin = -margin;
if (margin > aState.maxNegTopMargin) {
aState.maxNegTopMargin = margin;
}
} else {
if (margin > aState.maxPosTopMargin) {
aState.maxPosTopMargin = margin;
}
}
#endif
if ((margin = aKidMol->margin.bottom) < 0) {
margin = -margin;
if (margin > aState.maxNegBottomMargin) {
aState.maxNegBottomMargin = margin;
}
} else {
if (margin > aState.maxPosBottomMargin) {
aState.maxPosBottomMargin = margin;
}
}
}
// Update line max element size
nsSize& mes = aState.lineMaxElementSize;
if (nsnull != aKidMaxElementSize) {
if (aKidMaxElementSize->width > mes.width) {
mes.width = aKidMaxElementSize->width;
}
if (aKidMaxElementSize->height > mes.height) {
mes.height = aKidMaxElementSize->height;
}
}
}
// Places and sizes the block-level element, and advances the line.
// The rect is in the local coordinate space of the kid frame.
void nsBlockFrame::AddBlockChild(nsIPresContext* aCX,
nsBlockReflowState& aState,
nsIFrame* aKidFrame,
nsRect& aKidRect,
nsSize* aKidMaxElementSize,
nsStyleMolecule* aKidMol)
{
NS_PRECONDITION(nsnull != aState.lineStart, "bad line");
if (NS_STYLE_POSITION_RELATIVE == aKidMol->positionFlags) {
aState.needRelativePos = PR_TRUE;
}
// Translate from the kid's coordinate space to our coordinate space
aKidRect.x += aState.borderPadding.left + aKidMol->margin.left;
aKidRect.y += aState.y + aState.topMargin;
// Place and size the child
aKidFrame->SetRect(aKidRect);
aState.AddAscent(aKidRect.height);
aState.lineLength++;
// Is this the widest child frame?
nscoord xMost = aKidRect.XMost() + aKidMol->margin.right;
if (xMost > aState.kidXMost) {
aState.kidXMost = xMost;
}
// Update the max element size
if (nsnull != aKidMaxElementSize) {
if (aKidMaxElementSize->width > aState.maxElementSize->width) {
aState.maxElementSize->width = aKidMaxElementSize->width;
}
if (aKidMaxElementSize->height > aState.maxElementSize->height) {
aState.maxElementSize->height = aKidMaxElementSize->height;
}
}
// and the bottom line margin information which we'll use when placing
// the next child
if (aKidMol->margin.bottom < 0) {
aState.maxNegBottomMargin = -aKidMol->margin.bottom;
} else {
aState.maxPosBottomMargin = aKidMol->margin.bottom;
}
// Update the running y-offset
aState.y += aKidRect.height + aState.topMargin;
// Apply relative positioning if necessary
nsCSSLayout::RelativePositionChildren(aCX, this, aState.mol, aKidFrame, 1);
// Advance to the next line
aState.AdvanceToNextLine(aKidFrame, aKidRect.height);
}
/**
* Compute the available size for reflowing the given child at the
* current x,y position in the state. Note that this may return
* negative or zero width/height's if we are out of room.
*/
void nsBlockFrame::GetAvailSize(nsSize& aResult,
nsBlockReflowState& aState,
nsStyleMolecule* aKidMol,
PRBool aIsInline)
{
// Determine the maximum available reflow height for the child
nscoord yb = aState.borderPadding.top + aState.availSize.height;
aResult.height = aState.unconstrainedHeight ? NS_UNCONSTRAINEDSIZE :
yb - aState.y - aState.topMargin;
// Determine the maximum available reflow width for the child
if (aState.unconstrainedWidth) {
aResult.width = NS_UNCONSTRAINEDSIZE;
} else if (aIsInline) {
if (NS_STYLE_DIRECTION_LTR == aState.mol->direction) {
aResult.width = aState.currentBand->rects[0].XMost() - aState.x;
} else {
aResult.width = aState.x - aState.currentBand->rects[0].x;
}
} else {
// It's a block
aResult.width = aState.availSize.width - aKidMol->margin.left -
aKidMol->margin.right;
}
}
/**
* Push all of the kids that we have not reflowed, starting at
* aState.lineStart. aPrevKid is the kid previous to aState.lineStart
* and is also our last child. Note that line length is <B>NOT</B> a
* reflection of the number of children we are actually pushing
* (because we don't break the sibling list as we add children to the
* line).
*/
void nsBlockFrame::PushKids(nsBlockReflowState& aState)
{
nsIFrame* prevFrame = aState.prevLineLastFrame;
NS_PRECONDITION(nsnull != prevFrame, "pushing all kids");
#ifdef NS_DEBUG
nsIFrame* nextSibling;
prevFrame->GetNextSibling(nextSibling);
NS_PRECONDITION(nextSibling == aState.lineStart, "bad prev line");
#endif
#ifdef NS_DEBUG
PRInt32 numKids = LengthOf(mFirstChild);
NS_ASSERTION(numKids == mChildCount, "bad child count");
#endif
#ifdef NOISY
ListTag(stdout);
printf(": push kids (childCount=%d)\n", mChildCount);
DumpFlow();
#endif
PushChildren(aState.lineStart, prevFrame, mLastContentIsComplete);
SetLastContentOffset(prevFrame);
// Set mLastContentIsComplete to the previous lines last content is
// complete now that the previous line's last child is our last
// child.
mLastContentIsComplete = aState.prevLineLastContentIsComplete;
// Fix up child count
// XXX is there a better way? aState.lineLength doesn't work because
// we might be pushing more than just the pending line.
nsIFrame* kid = mFirstChild;
PRInt32 kids = 0;
while (nsnull != kid) {
kids++;
kid->GetNextSibling(kid);
}
mChildCount = kids;
// Make sure we have no lingering line data
aState.lineLength = 0;
aState.lineStart = nsnull;
#ifdef NOISY
ListTag(stdout);
printf(": push kids done (childCount=%d) [%c]\n", mChildCount,
(mLastContentIsComplete ? 'T' : 'F'));
DumpFlow();
#endif
}
/**
* Gets a band of available space starting at the specified y-offset. Assumes
* the local coordinate space is currently set to the upper-left origin of the
* bounding rect
*
* Updates "currentBand" and "x" member data of the block reflow state
*/
void nsBlockFrame::GetAvailableSpaceBand(nsBlockReflowState& aState, nscoord aY)
{
// Gets a band of available space.
aState.spaceManager->Translate(aState.borderPadding.left, 0);
aState.spaceManager->GetBandData(aY, aState.availSize, *aState.currentBand);
// XXX This is hack code that needs to change when the space manager interface
// changes to return both the available and unavailable space
//
// We'll get back anywhere between 1 and 3 rects depending on how many floaters
// there are. Actually the way it currently works we could get back zero rects
// if there are overlapping left and right floaters occupying all the space
if (aState.currentBand->count > 1) {
// If there are three rects then let's assume that there are floaters on the
// left and right and that only the middle rect is available
if (aState.currentBand->count == 3) {
aState.currentBand->rects[0] = aState.currentBand->rects[1];
} else {
// There are two rects. That means either a left or right floater. Just use
// whichever space is larger.
if (aState.currentBand->rects[1].width > aState.currentBand->rects[0].width) {
aState.currentBand->rects[0] = aState.currentBand->rects[1];
}
}
}
aState.spaceManager->Translate(-aState.borderPadding.left, 0);
aState.x = aState.currentBand->rects[0].x;
}
void nsBlockFrame::ClearFloaters(nsBlockReflowState& aState, PRUint32 aClear)
{
// Translate the coordinate space
aState.spaceManager->Translate(aState.borderPadding.left, 0);
getBand:
nscoord y = aState.y + aState.topMargin;
PRBool isLeftFloater = PR_FALSE;
PRBool isRightFloater = PR_FALSE;
// Get a band of available space
aState.spaceManager->GetBandData(y, aState.availSize, *aState.currentBand);
if (aState.currentBand->count == 1) {
if (aState.currentBand->rects[0].width != aState.availSize.width) {
// Some of the space is taken up by floaters
if (aState.currentBand->rects[0].x > 0) {
isLeftFloater = PR_TRUE;
}
if (aState.currentBand->rects[0].XMost() < aState.availSize.width) {
isRightFloater = PR_TRUE;
}
}
} else if (aState.currentBand->count == 2) {
if (aState.currentBand->rects[0].width > aState.currentBand->rects[1].width) {
isRightFloater = PR_TRUE;
} else {
isLeftFloater = PR_TRUE;
// There may also be a right floater
if (aState.currentBand->rects[1].XMost() < aState.availSize.width) {
isRightFloater = PR_TRUE;
}
}
} else {
// Must be both left and right floaters
isLeftFloater = PR_TRUE;
isRightFloater = PR_TRUE;
}
if (isLeftFloater) {
if ((aClear == NS_STYLE_CLEAR_LEFT) || (aClear == NS_STYLE_CLEAR_BOTH)) {
aState.y += aState.currentBand->rects[0].height;
goto getBand;
}
}
if (isRightFloater) {
if ((aClear == NS_STYLE_CLEAR_RIGHT) || (aClear == NS_STYLE_CLEAR_BOTH)) {
aState.y += aState.currentBand->rects[0].height;
goto getBand;
}
}
aState.spaceManager->Translate(-aState.borderPadding.left, 0);
}
// Bit's for PlaceAndReflowChild return value
#define PLACE_FIT 0x1
#define PLACE_FLOWED 0x2
PRIntn
nsBlockFrame::PlaceAndReflowChild(nsIPresContext* aCX,
nsBlockReflowState& aState,
nsIFrame* aKidFrame,
nsStyleMolecule* aKidMol)
{
nsSize kidMaxElementSize;
nsSize* pKidMaxElementSize =
(nsnull != aState.maxElementSize) ? &kidMaxElementSize : nsnull;
// Get line start setup if we are at the start of a new line
if (nsnull == aState.lineStart) {
NS_ASSERTION(0 == aState.lineLength, "bad line length");
aState.lineStart = aKidFrame;
}
// Get kid and its style
// XXX How is this any different than what was passed in to us as aKidMol?
nsIContent* kid;
nsIStyleContext* kidSC;
aKidFrame->GetContent(kid);
aKidFrame->GetStyleContext(aCX, kidSC);
nsStyleMolecule* kidMol = (nsStyleMolecule*)kidSC->GetData(kStyleMoleculeSID);
NS_RELEASE(kid);
// Figure out if kid is a block element or not
PRBool isInline = PR_TRUE;
PRIntn display = kidMol->display;
if (aState.firstChildIsInsideBullet && (mFirstChild == aKidFrame)) {
// XXX Special hack for properly reflowing bullets that have the
// inside value for list-style-position.
display = NS_STYLE_DISPLAY_INLINE;
}
if ((NS_STYLE_DISPLAY_BLOCK == display) ||
(NS_STYLE_DISPLAY_LIST_ITEM == display)) {
// Block elements always end up on the next line (unless they are
// already at the start of the line).
isInline = PR_FALSE;
if (aState.lineLength > 0) {
aState.breakAfterChild = PR_TRUE;
}
}
// Handle forced break first
if (aState.breakAfterChild) {
NS_ASSERTION(aState.lineStart != aKidFrame, "bad line");
// Get the last child in the current line
nsIFrame* lastFrame = aState.lineStart;
PRInt32 lineLen = aState.lineLength - 1;
while (--lineLen >= 0) {
lastFrame->GetNextSibling(lastFrame);
}
if (!AdvanceToNextLine(aCX, aState)) {
// The previous line didn't fit.
return 0;
}
aState.lineStart = aKidFrame;
// Get the style for the last child, and see if it wanted to clear floaters.
// This handles the BR tag, which is the only inline element for which clear
// applies
nsIStyleContext* lastChildSC;
lastFrame->GetStyleContext(aCX, lastChildSC);
nsStyleMolecule* lastChildMol = (nsStyleMolecule*)lastChildSC->GetData(kStyleMoleculeSID);
if (lastChildMol->clear != NS_STYLE_CLEAR_NONE) {
ClearFloaters(aState, lastChildMol->clear);
}
NS_RELEASE(lastChildSC);
}
// Now that we've handled force breaks (and maybe called AdvanceToNextLine()
// which checks), remember whether it's an inline frame
aState.isInline = isInline;
// If we're at the beginning of a line then compute the top margin that we
// should use
if (aState.lineStart == aKidFrame) {
// Compute the top margin to use for this line
aState.topMargin = GetTopMarginFor(aCX, aState, aKidFrame, kidMol, aState.isInline);
// If it's an inline element then get a band of available space
//
// XXX If we have a current band and there's unused space in that band
// then avoid this call to get a band...
if (aState.isInline) {
GetAvailableSpaceBand(aState, aState.y + aState.topMargin);
}
}
// Compute the available space to reflow the child into and then
// reflow it into that space.
nsSize kidAvailSize;
GetAvailSize(kidAvailSize, aState, kidMol, aState.isInline);
if ((aState.currentLineNumber > 0) && (kidAvailSize.height <= 0)) {
// No more room
return 0;
}
ReflowStatus status;
if (aState.isInline) {
nsReflowMetrics kidSize;
// Inline elements are never passed the space manager
status = ReflowChild(aKidFrame, aCX, kidSize, kidAvailSize,
pKidMaxElementSize);
// For first children, we skip all the fit checks because we must
// fit at least one child for a parent to figure what to do with us.
if ((aState.currentLineNumber > 0) || (aState.lineLength > 0)) {
NS_ASSERTION(nsnull != aState.lineStart, "bad line start");
if (aKidFrame == aState.lineStart) {
// Width always fits when we are at the logical left margin.
// Just check the height.
//
// XXX This height check isn't correct now that we have bands of
// available space...
if (kidSize.height > kidAvailSize.height) {
// It's too tall
return PLACE_FLOWED;
}
} else {
// Examine state and if the breakBeforeChild is set and we
// aren't already on the new line, do the forcing now.
// XXX Why aren't we doing this check BEFORE we resize reflow the child?
if (aState.breakBeforeChild) {
aState.breakBeforeChild = PR_FALSE;
if (aKidFrame != aState.lineStart) {
if (!AdvanceToNextLine(aCX, aState)) {
// Flushing out the line failed.
return PLACE_FLOWED;
}
aState.lineStart = aKidFrame;
// Get a band of available space
GetAvailableSpaceBand(aState, aState.y + aState.topMargin);
// Reflow child now that it has the line to itself
GetAvailSize(kidAvailSize, aState, kidMol, PR_TRUE);
status = ReflowChild(aKidFrame, aCX, kidSize, kidAvailSize,
pKidMaxElementSize);
}
}
// When we are not at the logical left margin then we need
// to check the width first. If we are too wide then advance
// to the next line and try reflowing again.
if (kidSize.width > kidAvailSize.width) {
// Too wide. Try next line
if (!AdvanceToNextLine(aCX, aState)) {
// Flushing out the line failed.
return PLACE_FLOWED;
}
aState.lineStart = aKidFrame;
// Get a band of available space
GetAvailableSpaceBand(aState, aState.y + aState.topMargin);
// Reflow splittable children
SplittableType isSplittable;
aKidFrame->IsSplittable(isSplittable);
if (isSplittable != frNotSplittable) {
// Update size info now that we are on the next line. Then
// reflow the child into the new available space.
GetAvailSize(kidAvailSize, aState, kidMol, PR_TRUE);
status = ReflowChild(aKidFrame, aCX, kidSize, kidAvailSize,
pKidMaxElementSize);
// If we just reflowed our last child then update the
// mLastContentIsComplete state.
nsIFrame* nextSibling;
aKidFrame->GetNextSibling(nextSibling);
if (nsnull == nextSibling) {
// Use state from the reflow we just did
mLastContentIsComplete = PRBool(status == frComplete);
}
}
// XXX This height check isn't correct now that we have bands of
// available space...
if (kidSize.height > kidAvailSize.height) {
// It's too tall on the next line
return PLACE_FLOWED;
}
// It's ok if it's too wide on the next line.
}
}
}
// Add child to the line
AddInlineChildToLine(aCX, aState, aKidFrame, kidSize, pKidMaxElementSize, kidMol);
} else {
nsRect kidRect;
// Does the block-level element want to clear any floaters that impact
// it? Note that the clear property only applies to block-level elements
// and the BR tag
if (aKidMol->clear != NS_STYLE_CLEAR_NONE) {
ClearFloaters(aState, aKidMol->clear);
GetAvailSize(kidAvailSize, aState, kidMol, PR_FALSE);
if ((aState.currentLineNumber > 0) && (kidAvailSize.height <= 0)) {
// No more room
return 0;
}
}
// Give the block its own local coordinate space.
//
// XXX This is wrong to have the parent try and account for the kid's
// left margin here, because we have to wait until we know what the
// left edge is and that means resolving any floaters that impact the
// block. If the kid wants to interact with the space manager then it
// will have to deal with left/right margins itself
nscoord tx = aState.borderPadding.left + aKidMol->margin.left;
nscoord ty = aState.y + aState.topMargin;
// Give the block-level element the opportunity to use the space manager
aState.spaceManager->Translate(tx, ty);
status = ReflowChild(aKidFrame, aCX, aState.spaceManager, kidAvailSize,
kidRect, pKidMaxElementSize);
aState.spaceManager->Translate(-tx, -ty);
// For first children, we skip all the fit checks because we must
// fit at least one child for a parent to figure what to do with us.
if ((aState.currentLineNumber > 0) || (aState.lineLength > 0)) {
// Block elements always fit horizontally (because they are
// always placed at the logical left margin). Check to see if
// the block fits vertically
if (kidRect.YMost() > kidAvailSize.height) {
// Nope
return PLACE_FLOWED;
}
}
// Add block child
// XXX We need to set lastContentIsComplete here, because AddBlockChild()
// calls AdvaneceToNextLine(). We need to restructure the flow of control,
// and use a state machine...
aState.lastContentIsComplete = PRBool(status == frComplete);
AddBlockChild(aCX, aState, aKidFrame, kidRect, pKidMaxElementSize, kidMol);
}
// If we just reflowed our last child then update the
// mLastContentIsComplete state.
nsIFrame* nextSibling;
aKidFrame->GetNextSibling(nextSibling);
if (nsnull == nextSibling) {
// Use state from the reflow we just did
mLastContentIsComplete = PRBool(status == frComplete);
}
aState.lastContentIsComplete = PRBool(status == frComplete);
if (aState.isInline && (frNotComplete == status)) {
// Since the inline child didn't complete its reflow we *know*
// that a continuation of it can't possibly fit on the current
// line. Therefore, set a flag in the state that will cause the
// a line break before the next frame is placed.
aState.breakAfterChild = PR_TRUE;
}
NS_RELEASE(kidSC);
aState.reflowStatus = status;
return PLACE_FLOWED | PLACE_FIT;
}
/**
* Reflow the existing frames.
*
* @param aCX presentation context to use
* @param aState <b>in out</b> parameter which tracks the state of
* reflow for the block frame.
* @return true if we successfully reflowed all the mapped children and false
* otherwise, e.g. we pushed children to the next in flow
*/
PRBool
nsBlockFrame::ReflowMappedChildren(nsIPresContext* aCX,
nsBlockReflowState& aState)
{
#ifdef NS_DEBUG
VerifyLastIsComplete();
#endif
#ifdef NOISY
ListTag(stdout);
printf(": reflow mapped (childCount=%d) [%d,%d,%c]\n",
mChildCount,
mFirstContentOffset, mLastContentOffset,
(mLastContentIsComplete ? 'T' : 'F'));
DumpFlow();
#endif
PRBool result = PR_TRUE;
nsIFrame* kidFrame;
nsIFrame* prevKidFrame = nsnull;
for (kidFrame = mFirstChild; nsnull != kidFrame; ) {
nsIContent* kid;
kidFrame->GetContent(kid);
nsIStyleContext* kidSC = aCX->ResolveStyleContextFor(kid, this);
nsStyleMolecule* kidMol = (nsStyleMolecule*)kidSC->GetData(kStyleMoleculeSID);
NS_RELEASE(kid);
// Attempt to place and reflow the child
// XXX if child is not splittable and it fits just place it where
// it is, otherwise advance to the next line and place it there if
// possible
PRIntn placeStatus = PlaceAndReflowChild(aCX, aState, kidFrame, kidMol);
ReflowStatus status = aState.reflowStatus;
NS_RELEASE(kidSC);
if (0 == (placeStatus & PLACE_FIT)) {
// The child doesn't fit. Push it and any remaining children.
PushKids(aState);
result = PR_FALSE;
goto push_done;
}
// Is the child complete?
nsIFrame* kidNextInFlow;
kidFrame->GetNextInFlow(kidNextInFlow);
if (frComplete == status) {
// Yes, the child is complete
NS_ASSERTION(nsnull == kidNextInFlow, "bad child flow list");
} else {
// No the child isn't complete
if (nsnull == kidNextInFlow) {
// The child doesn't have a next-in-flow so create a continuing
// frame. This hooks the child into the flow
nsIFrame* continuingFrame;
kidFrame->CreateContinuingFrame(aCX, this, continuingFrame);
NS_ASSERTION(nsnull != continuingFrame, "frame creation failed");
// Add the continuing frame to the sibling list
nsIFrame* nextSib;
kidFrame->GetNextSibling(nextSib);
continuingFrame->SetNextSibling(nextSib);
kidFrame->SetNextSibling(continuingFrame);
mChildCount++;
}
// Unlike the inline frame code we can't assume that we used
// up all of our space because the child's reflow status is
// frNotComplete. Instead, the child is probably split and
// we need to reflow the continuations as well.
}
// Get the next child frame
prevKidFrame = kidFrame;
kidFrame->GetNextSibling(kidFrame);
}
push_done:
#ifdef NS_DEBUG
nsIFrame* lastChild;
PRInt32 lastIndexInParent;
LastChild(lastChild);
lastChild->GetIndexInParent(lastIndexInParent);
NS_POSTCONDITION(lastIndexInParent == mLastContentOffset, "bad last content offset");
PRInt32 len = LengthOf(mFirstChild);
NS_POSTCONDITION(len == mChildCount, "bad child count");
VerifyLastIsComplete();
#endif
#ifdef NOISY
ListTag(stdout);
printf(": reflow mapped %sok (childCount=%d) [%d,%d,%c]\n",
(result ? "" : "NOT "),
mChildCount,
mFirstContentOffset, mLastContentOffset,
(mLastContentIsComplete ? 'T' : 'F'));
DumpFlow();
#endif
return result;
}
PRBool nsBlockFrame::MoreToReflow(nsIPresContext* aCX)
{
PRBool rv = PR_FALSE;
if (IsPseudoFrame()) {
// Get the next content object that we would like to reflow
PRInt32 kidIndex = NextChildOffset();
nsIContent* kid = mContent->ChildAt(kidIndex);
if (nsnull != kid) {
// Resolve style for the kid
nsIStyleContext* kidSC = aCX->ResolveStyleContextFor(kid, this);
nsStyleMolecule* kidMol = (nsStyleMolecule*)kidSC->GetData(kStyleMoleculeSID);
switch (kidMol->display) {
case NS_STYLE_DISPLAY_BLOCK:
case NS_STYLE_DISPLAY_LIST_ITEM:
// Block pseudo-frames do not contain other block elements
break;
default:
rv = PR_TRUE;
break;
}
NS_RELEASE(kidSC);
NS_RELEASE(kid);
}
} else {
if (NextChildOffset() < mContent->ChildCount()) {
rv = PR_TRUE;
}
}
return rv;
}
/**
* Create new frames for content we haven't yet mapped
*
* @param aCX presentation context to use
* @return frComplete if all content has been mapped and frNotComplete
* if we should be continued
*/
nsIFrame::ReflowStatus
nsBlockFrame::ReflowAppendedChildren(nsIPresContext* aCX,
nsBlockReflowState& aState)
{
#ifdef NS_DEBUG
VerifyLastIsComplete();
#endif
nsIFrame* kidPrevInFlow = nsnull;
ReflowStatus result = frNotComplete;
// If we have no children and we have a prev-in-flow then we need to pick
// up where it left off. If we have children, e.g. we're being resized, then
// our content offset should already be set correctly...
if ((nsnull == mFirstChild) && (nsnull != mPrevInFlow)) {
nsBlockFrame* prev = (nsBlockFrame*) mPrevInFlow;
NS_ASSERTION(prev->mLastContentOffset >= prev->mFirstContentOffset, "bad prevInFlow");
mFirstContentOffset = prev->NextChildOffset();
if (PR_FALSE == prev->mLastContentIsComplete) {
// Our prev-in-flow's last child is not complete
prev->LastChild(kidPrevInFlow);
}
}
// Place our children, one at a time until we are out of children
PRInt32 kidIndex = NextChildOffset();
nsIFrame* kidFrame = nsnull;
nsIFrame* prevKidFrame;
LastChild(prevKidFrame);
for (;;) {
// Get the next content object
nsIContent* kid = mContent->ChildAt(kidIndex);
if (nsnull == kid) {
result = frComplete;
break;
}
// Resolve style for the kid
nsIStyleContext* kidSC = aCX->ResolveStyleContextFor(kid, this);
nsStyleMolecule* kidMol = (nsStyleMolecule*)kidSC->GetData(kStyleMoleculeSID);
// Is it a floater?
if (kidMol->floats != NS_STYLE_FLOAT_NONE) {
PlaceholderFrame::NewFrame(&kidFrame, kid, kidIndex, this);
kidFrame->SetStyleContext(kidSC);
} else if (nsnull == kidPrevInFlow) {
// Create initial frame for the child
nsIContentDelegate* kidDel;
nsresult fr;
switch (kidMol->display) {
case NS_STYLE_DISPLAY_BLOCK:
case NS_STYLE_DISPLAY_LIST_ITEM:
// Pseudo block frames do not contain other block elements
// unless the block element would be the first child.
if (IsPseudoFrame()) {
// If we're being used as a pseudo frame, i.e. we map the same
// content as our parent then we want to indicate we're complete;
// otherwise we'll be continued and go on mapping children...
// It better be true that we are not being asked to flow a
// block element as our first child. That means the body
// decided it needed a pseudo-frame when it shouldn't have.
NS_ASSERTION(nsnull != mFirstChild, "bad body");
NS_RELEASE(kidSC);
NS_RELEASE(kid);
result = frComplete;
goto done;
}
// FALL THROUGH (and create frame)
case NS_STYLE_DISPLAY_INLINE:
kidDel = kid->GetDelegate(aCX);
kidFrame = kidDel->CreateFrame(aCX, kid, kidIndex, this);
NS_RELEASE(kidDel);
break;
default:
NS_ASSERTION(nsnull == kidPrevInFlow, "bad prev in flow");
fr = nsFrame::NewFrame(&kidFrame, kid, kidIndex, this);
break;
}
kidFrame->SetStyleContext(kidSC);
} else {
// Since kid has a prev-in-flow, use that to create the next
// frame.
kidPrevInFlow->CreateContinuingFrame(aCX, this, kidFrame);
}
// Link child frame into the list of children. If the frame ends
// up not fitting and getting pushed, the PushKids code will fixup
// the child count for us.
if (nsnull != prevKidFrame) {
#ifdef NS_DEBUG
nsIFrame* nextSibling;
prevKidFrame->GetNextSibling(nextSibling);
NS_ASSERTION(nsnull == nextSibling, "bad append");
#endif
prevKidFrame->SetNextSibling(kidFrame);
} else {
NS_ASSERTION(nsnull == mFirstChild, "bad create");
mFirstChild = kidFrame;
SetFirstContentOffset(kidFrame);
}
prevKidFrame = kidFrame;
mChildCount++;
// Reflow child frame as many times as necessary until it is
// complete.
ReflowStatus status;
do {
PRIntn placeStatus = PlaceAndReflowChild(aCX, aState, kidFrame, kidMol);
status = aState.reflowStatus;
if (0 == (placeStatus & PLACE_FIT)) {
// We ran out of room.
nsIFrame* kidNextInFlow;
kidFrame->GetNextInFlow(kidNextInFlow);
mLastContentIsComplete = PRBool(nsnull == kidNextInFlow);
PushKids(aState);
NS_RELEASE(kid);
NS_RELEASE(kidSC);
goto push_done;
}
// Did the child complete?
prevKidFrame = kidFrame;
if (frNotComplete == status) {
// Child didn't complete so create a continuing frame
kidPrevInFlow = kidFrame;
nsIFrame* continuingFrame;
kidFrame->CreateContinuingFrame(aCX, this, continuingFrame);
// Add the continuing frame to the sibling list
nsIFrame* kidNextSibling;
kidFrame->GetNextSibling(kidNextSibling);
continuingFrame->SetNextSibling(kidNextSibling);
kidFrame->SetNextSibling(continuingFrame);
kidFrame = continuingFrame;
mChildCount++;
// Switch to new kid style
NS_RELEASE(kidSC);
kidFrame->GetStyleContext(aCX, kidSC);
kidMol = (nsStyleMolecule*)kidSC->GetData(kStyleMoleculeSID);
}
#ifdef NS_DEBUG
nsIFrame* kidNextInFlow;
kidFrame->GetNextInFlow(kidNextInFlow);
NS_ASSERTION(nsnull == kidNextInFlow, "huh?");
#endif
} while (frNotComplete == status);
NS_RELEASE(kid);
NS_RELEASE(kidSC);
// The child that we just reflowed is complete
#ifdef NS_DEBUG
nsIFrame* kidNextInFlow;
kidFrame->GetNextInFlow(kidNextInFlow);
NS_ASSERTION(nsnull == kidNextInFlow, "bad child flow list");
#endif
kidIndex++;
kidPrevInFlow = nsnull;
}
done:
// To get here we either completely reflowed all our appended
// children OR we are a pseudo-frame and we ran into a block
// element. In either case our last content MUST be complete.
NS_ASSERTION(PR_TRUE == aState.lastContentIsComplete, "bad state");
NS_ASSERTION(IsLastChild(prevKidFrame), "bad last child");
SetLastContentOffset(prevKidFrame);
push_done:
#ifdef NS_DEBUG
PRInt32 len = LengthOf(mFirstChild);
NS_ASSERTION(len == mChildCount, "bad child count");
VerifyLastIsComplete();
#endif
return result;
}
/**
* Pullup frames from our next in flow and try to place them. Before
* this is called our previously mapped children, if any have been
* reflowed which means that the block reflow state's x and y
* coordinates and other data are ready to go.
*
* Return true if we pulled everything up.
*/
PRBool
nsBlockFrame::PullUpChildren(nsIPresContext* aCX,
nsBlockReflowState& aState)
{
#ifdef NS_DEBUG
VerifyLastIsComplete();
#endif
#ifdef NOISY
ListTag(stdout);
printf(": pullup (childCount=%d) [%d,%d,%c]\n",
mChildCount,
mFirstContentOffset, mLastContentOffset,
(mLastContentIsComplete ? 'T' : 'F'));
DumpFlow();
#endif
PRBool result = PR_TRUE;
nsBlockFrame* nextInFlow = (nsBlockFrame*) mNextInFlow;
nsIFrame* prevKidFrame;
LastChild(prevKidFrame);
while (nsnull != nextInFlow) {
// Get first available frame from the next-in-flow
nsIFrame* kidFrame = PullUpOneChild(nextInFlow, prevKidFrame);
if (nsnull == kidFrame) {
// We've pulled up all the children from that next-in-flow, so
// move to the next next-in-flow.
nextInFlow = (nsBlockFrame*) nextInFlow->mNextInFlow;
continue;
}
// Get style information for the pulled up kid
nsIContent* kid;
kidFrame->GetContent(kid);
nsIStyleContext* kidSC = aCX->ResolveStyleContextFor(kid, this);
nsStyleMolecule* kidMol = (nsStyleMolecule*)kidSC->GetData(kStyleMoleculeSID);
ReflowStatus status;
do {
PRIntn placeStatus = PlaceAndReflowChild(aCX, aState, kidFrame, kidMol);
status = aState.reflowStatus;
if (0 == (placeStatus & PLACE_FIT)) {
// Push the kids that didn't fit back down to the next-in-flow
nsIFrame* kidNextInFlow;
kidFrame->GetNextInFlow(kidNextInFlow);
mLastContentIsComplete = PRBool(nsnull == kidNextInFlow);
PushKids(aState);
result = PR_FALSE;
NS_RELEASE(kid);
NS_RELEASE(kidSC);
goto push_done;
}
if (frNotComplete == status) {
// Child is not complete
nsIFrame* kidNextInFlow;
kidFrame->GetNextInFlow(kidNextInFlow);
if (nsnull == kidNextInFlow) {
// Create a continuing frame for the incomplete child
nsIFrame* continuingFrame;
kidFrame->CreateContinuingFrame(aCX, this, continuingFrame);
// Add the continuing frame to our sibling list.
nsIFrame* nextSibling;
kidFrame->GetNextSibling(nextSibling);
continuingFrame->SetNextSibling(nextSibling);
kidFrame->SetNextSibling(continuingFrame);
prevKidFrame = kidFrame;
kidFrame = continuingFrame;
mChildCount++;
// Switch to new kid style
NS_RELEASE(kidSC);
kidFrame->GetStyleContext(aCX, kidSC);
kidMol = (nsStyleMolecule*)kidSC->GetData(kStyleMoleculeSID);
} else {
// The child has a next-in-flow, but it's not one of ours.
// It *must* be in one of our next-in-flows. Collect it
// then.
NS_ASSERTION(!IsChild(kidNextInFlow), "busted kid next-in-flow");
break;
}
}
} while (frNotComplete == status);
NS_RELEASE(kid);
NS_RELEASE(kidSC);
prevKidFrame = kidFrame;
}
if (nsnull != prevKidFrame) {
// The only way we can get here is by pulling up every last child
// in our next-in-flows (and reflowing any continunations they
// have). Therefore we KNOW that our last child is complete.
NS_ASSERTION(PR_TRUE == aState.lastContentIsComplete, "bad state");
NS_ASSERTION(IsLastChild(prevKidFrame), "bad last child");
SetLastContentOffset(prevKidFrame);
}
push_done:;
if (result == PR_FALSE) {
// If our next-in-flow is empty OR our next next-in-flow is empty
// then adjust the offsets of all of the empty next-in-flows.
nextInFlow = (nsBlockFrame*) mNextInFlow;
if ((0 == nextInFlow->mChildCount) ||
((nsnull != nextInFlow->mNextInFlow) &&
(0 == ((nsBlockFrame*)(nextInFlow->mNextInFlow))->mChildCount))) {
// We didn't pullup everything and we need to fixup one of our
// next-in-flows content offsets.
AdjustOffsetOfEmptyNextInFlows();
}
}
#ifdef NS_DEBUG
PRInt32 len = LengthOf(mFirstChild);
NS_ASSERTION(len == mChildCount, "bad child count");
VerifyLastIsComplete();
#endif
#ifdef NOISY
ListTag(stdout);
printf(": pullup %sok (childCount=%d) [%d,%d,%c]\n",
(result ? "" : "NOT "),
mChildCount,
mFirstContentOffset, mLastContentOffset,
(mLastContentIsComplete ? 'T' : 'F'));
DumpFlow();
#endif
return result;
}
void nsBlockFrame::SetupState(nsIPresContext* aCX,
nsBlockReflowState& aState,
const nsSize& aMaxSize,
nsSize* aMaxElementSize,
nsISpaceManager* aSpaceManager)
{
// Setup reflow state
nsStyleMolecule* mol =
(nsStyleMolecule*)mStyleContext->GetData(kStyleMoleculeSID);
nsStyleFont* font =
(nsStyleFont*)mStyleContext->GetData(kStyleFontSID);
aState.Init(aMaxSize, aMaxElementSize, font, mol, aSpaceManager);
// Apply border and padding adjustments for regular frames only
if (PR_FALSE == IsPseudoFrame()) {
aState.borderPadding = mol->borderPadding;
aState.y = mol->borderPadding.top;
aState.availSize.width -=
(mol->borderPadding.left + mol->borderPadding.right);
aState.availSize.height -=
(mol->borderPadding.top + mol->borderPadding.bottom);
} else {
aState.borderPadding.SizeTo(0, 0, 0, 0);
}
// Setup initial list ordinal value
nsIAtom* tag = mContent->GetTag();
if ((tag == nsHTMLAtoms::ul) || (tag == nsHTMLAtoms::ol) ||
(tag == nsHTMLAtoms::menu) || (tag == nsHTMLAtoms::dir)) {
nsHTMLValue value;
if (eContentAttr_HasValue ==
((nsIHTMLContent*)mContent)->GetAttribute(nsHTMLAtoms::start, value)) {
if (eHTMLUnit_Absolute == value.GetUnit()) {
aState.nextListOrdinal = value.GetIntValue();
}
}
}
NS_RELEASE(tag);
mCurrentState = &aState;
}
#include "nsUnitConversion.h"/* XXX */
NS_METHOD nsBlockFrame::ResizeReflow(nsIPresContext* aCX,
nsISpaceManager* aSpaceManager,
const nsSize& aMaxSize,
nsRect& aDesiredRect,
nsSize* aMaxElementSize,
ReflowStatus& aStatus)
{
nsBlockReflowState state;
SetupState(aCX, state, aMaxSize, aMaxElementSize, aSpaceManager);
return DoResizeReflow(aCX, state, aDesiredRect, aStatus);
}
nsresult nsBlockFrame::DoResizeReflow(nsIPresContext* aCX,
nsBlockReflowState& aState,
nsRect& aDesiredRect,
ReflowStatus& aStatus)
{
#ifdef NS_DEBUG
PreReflowCheck();
#endif
#ifdef NOISY
ListTag(stdout);
printf(": resize reflow %g,%g\n",
NS_TWIPS_TO_POINTS_FLOAT(aState.availSize.width),
NS_TWIPS_TO_POINTS_FLOAT(aState.availSize.height));
DumpFlow();
#endif
// Zap old line data
if (nsnull != mLines) {
delete mLines;
mLines = nsnull;
}
mNumLines = 0;
// Check for an overflow list
MoveOverflowToChildList();
// Before we start reflowing, cache a pointer to our state structure
// so that inline frames can find it.
nsIPresShell* shell = aCX->GetShell();
shell->PutCachedData(this, &aState);
// First reflow any existing frames
PRBool reflowMappedOK = PR_TRUE;
aStatus = frComplete;
if (nsnull != mFirstChild) {
reflowMappedOK = ReflowMappedChildren(aCX, aState);
if (!reflowMappedOK) {
aStatus = frNotComplete;
}
}
if (reflowMappedOK) {
// Any space left?
nscoord yb = aState.borderPadding.top + aState.availSize.height;
if ((nsnull != mFirstChild) && (aState.y >= yb)) {
// No space left. Don't try to pull-up children or reflow
// unmapped. We need to return the correct completion status,
// so see if there is more to reflow.
if (MoreToReflow(aCX)) {
aStatus = frNotComplete;
}
} else if (MoreToReflow(aCX)) {
// Try and pull-up some children from a next-in-flow
if ((nsnull == mNextInFlow) || PullUpChildren(aCX, aState)) {
// If we still have unmapped children then create some new frames
if (MoreToReflow(aCX)) {
aStatus = ReflowAppendedChildren(aCX, aState);
}
} else {
// We were unable to pull-up all the existing frames from the
// next in flow
aStatus = frNotComplete;
}
}
}
// Deal with last line - make sure it gets vertically and
// horizontally aligned. This also updates the state's y coordinate
// which is good because that's how we size ourselves.
if (0 != aState.lineLength) {
if (!AdvanceToNextLine(aCX, aState)) {
// The last line of output doesn't fit. Push all of the kids to
// the next in flow and change our reflow status to not complete
// so that we are continued.
#ifdef NOISY
ListTag(stdout);
printf(": pushing kids since last line doesn't fit\n");
#endif
PushKids(aState);
aStatus = frNotComplete;
}
}
if (frComplete == aStatus) {
// Don't forget to add in the bottom margin from our last child.
// Only add it in if there is room for it.
nscoord margin = aState.prevMaxPosBottomMargin -
aState.prevMaxNegBottomMargin;
nscoord y = aState.y + margin;
if (y <= aState.borderPadding.top + aState.availSize.height) {
aState.y = y;
}
}
// Now that reflow has finished, remove the cached pointer
shell->RemoveCachedData(this);
NS_RELEASE(shell);
// Translate state.lineLengths into an integer array
mNumLines = aState.lineLengths.Count();
if (mNumLines > 0) {
mLines = new PRInt32[mNumLines];
for (PRInt32 i = 0; i < mNumLines; i++) {
PRInt32 ll = (PRInt32) aState.lineLengths.ElementAt(i);
mLines[i] = ll;
}
}
if (!aState.unconstrainedWidth && aState.justifying) {
// Perform justification now that we know how many lines we have.
JustifyLines(aCX, aState);
}
// Return our desired rect and our status
aDesiredRect.x = 0;
aDesiredRect.y = 0;
aDesiredRect.width = aState.kidXMost + aState.borderPadding.right;
if (!aState.unconstrainedWidth) {
// Make sure we're at least as wide as the max size we were given
nscoord maxWidth = aState.availSize.width + aState.borderPadding.left +
aState.borderPadding.right;
if (aDesiredRect.width < maxWidth) {
aDesiredRect.width = maxWidth;
}
}
aState.y += aState.borderPadding.bottom;
aDesiredRect.height = aState.y;
#ifdef NS_DEBUG
PostReflowCheck(aStatus);
#endif
#ifdef NOISY
ListTag(stdout);
printf(": resize reflow %g,%g %scomplete [%d,%d,%c]\n",
NS_TWIPS_TO_POINTS_FLOAT(aState.availSize.width),
NS_TWIPS_TO_POINTS_FLOAT(aState.availSize.height),
((status == frNotComplete) ? "NOT " : ""),
mFirstContentOffset, mLastContentOffset,
(mLastContentIsComplete ? 'T' : 'F')
);
DumpFlow();
#endif
mCurrentState = nsnull;
return NS_OK;
}
void nsBlockFrame::JustifyLines(nsIPresContext* aCX,
nsBlockReflowState& aState)
{
// XXX we don't justify the last line; what if we are continued,
// should we do it then?
nsIFrame* kid = mFirstChild;
for (PRInt32 i = 0; i < mNumLines; i++) {
nsIFrame* lineStart = kid;
PRInt32 lineLength = mLines[i];
if (i < mNumLines - 1) {
if (1 == lineLength) {
// For lines with one element on them we can take a shortcut and
// let them do the justification. Note that we still call
// JustifyReflow even if the available space is zero in case the
// child is a hunk of text that ends in whitespace. The whitespace
// will be distributed elsewhere causing a proper flush right look
// for the last word.
nsRect r;
kid->GetRect(r);
nscoord maxWidth = aState.availSize.width;
nscoord availableSpace = maxWidth - r.width;
nscoord maxAvailSpace = nscoord(maxWidth * 0.1f);
if ((availableSpace >= 0) && (availableSpace < maxAvailSpace)) {
kid->JustifyReflow(aCX, availableSpace);
kid->SizeTo(r.width + availableSpace, r.height);
}
kid->GetNextSibling(kid);
} else {
// XXX Get justification of multiple elements working
while (--lineLength >= 0) {
kid->GetNextSibling(kid);
}
}
}
// Finally, now that the in-flow positions of the line's frames are
// known we can apply relative positioning if any of them need it.
nsCSSLayout::RelativePositionChildren(aCX, this, aState.mol,
lineStart, mLines[i]);
}
}
NS_METHOD nsBlockFrame::IsSplittable(SplittableType& aIsSplittable) const
{
aIsSplittable = frSplittableNonRectangular;
return NS_OK;
}
NS_METHOD nsBlockFrame::CreateContinuingFrame(nsIPresContext* aCX,
nsIFrame* aParent,
nsIFrame*& aContinuingFrame)
{
nsBlockFrame* cf = new nsBlockFrame(mContent, mIndexInParent, aParent);
PrepareContinuingFrame(aCX, aParent, cf);
aContinuingFrame = cf;
return NS_OK;
}
NS_METHOD nsBlockFrame::IncrementalReflow(nsIPresContext* aCX,
nsISpaceManager* aSpaceManager,
const nsSize& aMaxSize,
nsRect& aDesiredRect,
nsReflowCommand& aReflowCommand,
ReflowStatus& aStatus)
{
aStatus = frComplete;
if (aReflowCommand.GetTarget() == this) {
// XXX for now, just do a complete reflow mapped (it'll kinda
// work, but it's slow)
nsBlockReflowState state;
SetupState(aCX, state, aMaxSize, nsnull, aSpaceManager);
PRBool reflowMappedOK = ReflowMappedChildren(aCX, state);
if (!reflowMappedOK) {
aStatus = frNotComplete;
}
} else {
// XXX not yet implemented
NS_ABORT();
// XXX work to compute initial state goes *HERE*
aDesiredRect.x = 0;
aDesiredRect.y = 0;
aDesiredRect.width = 0;
aDesiredRect.height = 0;
}
mCurrentState = nsnull;
return NS_OK;
}
PRBool nsBlockFrame::IsLeftMostChild(nsIFrame* aFrame)
{
do {
nsIFrame* parent;
aFrame->GetGeometricParent(parent);
// See if there are any non-zero sized child frames that precede aFrame
// in the child list
nsIFrame* child;
parent->FirstChild(child);
while ((nsnull != child) && (aFrame != child)) {
nsSize size;
// Is the child zero-sized?
child->GetSize(size);
if ((size.width > 0) || (size.height > 0)) {
// We found a non-zero sized child frame that precedes aFrame
return PR_FALSE;
}
child->GetNextSibling(child);
}
// aFrame is the left-most non-zero sized frame in its geometric parent.
// Walk up one level and check that its parent is left-most as well
aFrame = parent;
} while (aFrame != this);
return PR_TRUE;
}
PRBool nsBlockFrame::AddFloater(nsIPresContext* aCX,
nsIFrame* aFloater,
PlaceholderFrame* aPlaceholder)
{
// Get the frame associated with the space manager, and get its nsIAnchoredItems
// interface
nsIFrame* frame = mCurrentState->spaceManager->GetFrame();
nsIAnchoredItems* anchoredItems = nsnull;
frame->QueryInterface(kIAnchoredItemsIID, (void**)&anchoredItems);
NS_ASSERTION(nsnull != anchoredItems, "no anchored items interface");
if (nsnull != anchoredItems) {
anchoredItems->AddAnchoredItem(aFloater, nsIAnchoredItems::anHTMLFloater, this);
PlaceFloater(aCX, aFloater, aPlaceholder);
return PR_TRUE;
}
return PR_FALSE;
}
// XXX The size of the floater needs to be taken into consideration if we're
// computing a maximum element size
void nsBlockFrame::PlaceFloater(nsIPresContext* aCX,
nsIFrame* aFloater,
PlaceholderFrame* aPlaceholder)
{
// If the floater is the left-most non-zero size child frame then insert
// it before the current line; otherwise add it to the below-current-line
// todo list and we'll handle it when we flush out the line
if (IsLeftMostChild(aPlaceholder)) {
// Get the type of floater
nsIStyleContext* styleContext;
aFloater->GetStyleContext(aCX, styleContext);
nsStyleMolecule* mol = (nsStyleMolecule*)styleContext->GetData(kStyleMoleculeSID);
NS_RELEASE(styleContext);
if (!mCurrentState->isInline) {
// Get the current band for this line
GetAvailableSpaceBand(*mCurrentState, mCurrentState->y + mCurrentState->topMargin);
}
// Commit some space in the space manager
nsRect region;
aFloater->GetRect(region);
region.y = mCurrentState->currentBand->rects[0].y;
if (NS_STYLE_FLOAT_LEFT == mol->floats) {
region.x = mCurrentState->currentBand->rects[0].x;
} else {
NS_ASSERTION(NS_STYLE_FLOAT_RIGHT == mol->floats, "bad float type");
region.x = mCurrentState->currentBand->rects[0].XMost() - region.width;
}
// XXX Don't forget the floater's margins...
mCurrentState->spaceManager->Translate(mCurrentState->borderPadding.left, 0);
mCurrentState->spaceManager->AddRectRegion(region);
// Set the origin of the floater in world coordinates
nscoord worldX, worldY;
mCurrentState->spaceManager->GetTranslation(worldX, worldY);
aFloater->MoveTo(region.x + worldX, region.y + worldY);
mCurrentState->spaceManager->Translate(-mCurrentState->borderPadding.left, 0);
// Update the band of available space to reflect space taken up by the floater
GetAvailableSpaceBand(*mCurrentState, mCurrentState->y + mCurrentState->topMargin);
} else {
// Add the floater to our to-do list
mCurrentState->floaterToDo.AppendElement(aFloater);
}
}
NS_METHOD nsBlockFrame::ContentAppended(nsIPresShell* aShell,
nsIPresContext* aPresContext,
nsIContent* aContainer)
{
// Get the last-in-flow
nsBlockFrame* flow = (nsBlockFrame*)GetLastInFlow();
PRInt32 kidIndex = flow->NextChildOffset();
PRInt32 startIndex = kidIndex;
nsIFrame* kidFrame = nsnull;
nsIFrame* prevKidFrame;
flow->LastChild(prevKidFrame);
for (;;) {
// Get the next content object
nsIContent* kid = mContent->ChildAt(kidIndex);
if (nsnull == kid) {
break;
}
// Resolve style for the kid
nsIStyleContext* kidSC = aPresContext->ResolveStyleContextFor(kid, this);
nsStyleMolecule* kidMol = (nsStyleMolecule*)kidSC->GetData(kStyleMoleculeSID);
// Is it a floater?
if (kidMol->floats != NS_STYLE_FLOAT_NONE) {
PlaceholderFrame::NewFrame(&kidFrame, kid, kidIndex, this);
} else {
// Create initial frame for the child
nsIContentDelegate* kidDel;
nsresult fr;
switch (kidMol->display) {
case NS_STYLE_DISPLAY_BLOCK:
case NS_STYLE_DISPLAY_LIST_ITEM:
// Pseudo block frames do not contain other block elements
// unless the block element would be the first child.
if (IsPseudoFrame()) {
// Update last content offset now that we are done drawing
// children from our parent.
SetLastContentOffset(prevKidFrame);
// It better be true that we are not being asked to flow a
// block element as our first child. That means the body
// decided it needed a pseudo-frame when it shouldn't have.
NS_ASSERTION(nsnull != mFirstChild, "bad body");
NS_RELEASE(kidSC);
NS_RELEASE(kid);
return NS_OK;
}
// FALL THROUGH (and create frame)
case NS_STYLE_DISPLAY_INLINE:
kidDel = kid->GetDelegate(aPresContext);
kidFrame = kidDel->CreateFrame(aPresContext, kid, kidIndex, this);
NS_RELEASE(kidDel);
break;
default:
fr = nsFrame::NewFrame(&kidFrame, kid, kidIndex, this);
break;
}
}
kidFrame->SetStyleContext(kidSC);
NS_RELEASE(kidSC);
NS_RELEASE(kid);
// Link child frame into the list of children
if (nsnull != prevKidFrame) {
#ifdef NS_DEBUG
nsIFrame* nextSibling;
prevKidFrame->GetNextSibling(nextSibling);
NS_ASSERTION(nsnull == nextSibling, "bad append");
#endif
prevKidFrame->SetNextSibling(kidFrame);
} else {
NS_ASSERTION(nsnull == mFirstChild, "bad create");
mFirstChild = kidFrame;
SetFirstContentOffset(kidFrame);
}
prevKidFrame = kidFrame;
kidIndex++;
mChildCount++;
}
SetLastContentOffset(prevKidFrame);
// If this is a pseudo-frame then our parent will generate the
// reflow command. Otherwise, if the container is us then we should
// generate the reflow command because we were directly called.
if (!IsPseudoFrame() && (aContainer == mContent)) {
nsReflowCommand* rc =
new nsReflowCommand(aPresContext, flow, nsReflowCommand::FrameAppended,
startIndex);
aShell->AppendReflowCommand(rc);
}
return NS_OK;
}
PRIntn nsBlockFrame::GetSkipSides() const
{
PRIntn skip = 0;
if (nsnull != mPrevInFlow) {
skip |= 1 << NS_SIDE_TOP;
}
if (nsnull != mNextInFlow) {
skip |= 1 << NS_SIDE_BOTTOM;
}
return skip;
}
nsHTMLFrameType nsBlockFrame::GetFrameType() const
{
return eHTMLFrame_Block;
}
NS_METHOD nsBlockFrame::ListTag(FILE* out) const
{
if ((nsnull != mGeometricParent) && IsPseudoFrame()) {
fprintf(out, "*block(%d)@%p", mIndexInParent, this);
} else {
nsHTMLContainerFrame::ListTag(out);
}
return NS_OK;
}
#ifdef NS_DEBUG
void nsBlockFrame::DumpFlow() const
{
#ifdef NOISY_FLOW
nsBlockFrame* flow = (nsBlockFrame*) mNextInFlow;
while (flow != 0) {
printf(" %p: [%d,%d,%c]\n",
flow, flow->mFirstContentOffset, flow->mLastContentOffset,
(flow->mLastContentIsComplete ? 'T' : 'F'));
flow = (nsBlockFrame*) flow->mNextInFlow;
}
#endif
}
#endif
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку