mozilla
/
pjs
зеркало из https://github.com/mozilla/pjs.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
pjs/nsprpub/pr/tests/layer.c

467 строки
16 KiB
C
Исходник Ответственный История

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
* Version: MPL 1.1/GPL 2.0/LGPL 2.1
*
* The contents of this file are subject to the Mozilla Public License Version
* 1.1 (the "License"); you may not use this file except in compliance with
* the License. You may obtain a copy of the License at
* http://www.mozilla.org/MPL/
*
* Software distributed under the License is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
* for the specific language governing rights and limitations under the
* License.
*
* The Original Code is the Netscape Portable Runtime (NSPR).
*
* The Initial Developer of the Original Code is
* Netscape Communications Corporation.
* Portions created by the Initial Developer are Copyright (C) 1998-2000
* the Initial Developer. All Rights Reserved.
*
* Contributor(s):
*
* Alternatively, the contents of this file may be used under the terms of
* either the GNU General Public License Version 2 or later (the "GPL"), or
* the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
* in which case the provisions of the GPL or the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of either the GPL or the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the GPL or the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of any one of the MPL, the GPL or the LGPL.
*
* ***** END LICENSE BLOCK ***** */
#include "prio.h"
#include "prprf.h"
#include "prlog.h"
#include "prnetdb.h"
#include "prthread.h"
#include "plerror.h"
#include "plgetopt.h"
#include "prwin16.h"
#include <stdlib.h>
#include <string.h>
/*
** Testing layering of I/O
**
** The layered server
** A thread that acts as a server. It creates a TCP listener with a dummy
** layer pushed on top. Then listens for incoming connections. Each connection
** request for connection will be layered as well, accept one request, echo
** it back and close.
**
** The layered client
** Pretty much what you'd expect.
*/
static PRFileDesc *logFile;
static PRDescIdentity identity;
static PRNetAddr server_address;
static PRIOMethods myMethods;
typedef enum Verbosity {silent, quiet, chatty, noisy} Verbosity;
static PRIntn minor_iterations = 5;
static PRIntn major_iterations = 1;
static Verbosity verbosity = quiet;
static PRUint16 default_port = 12273;
static PRFileDesc *PushLayer(PRFileDesc *stack)
{
PRFileDesc *layer = PR_CreateIOLayerStub(identity, &myMethods);
PRStatus rv = PR_PushIOLayer(stack, PR_GetLayersIdentity(stack), layer);
if (verbosity > quiet)
PR_fprintf(logFile, "Pushed layer(0x%x) onto stack(0x%x)\n", layer, stack);
PR_ASSERT(PR_SUCCESS == rv);
return stack;
} /* PushLayer */
static PRFileDesc *PushNewLayers(PRFileDesc *stack)
{
PRDescIdentity tmp_identity;
PRFileDesc *layer;
PRStatus rv;
/* push a dummy layer */
tmp_identity = PR_GetUniqueIdentity("Dummy 1");
layer = PR_CreateIOLayerStub(tmp_identity, PR_GetDefaultIOMethods());
rv = PR_PushIOLayer(stack, PR_GetLayersIdentity(stack), layer);
if (verbosity > quiet)
PR_fprintf(logFile, "Pushed layer(0x%x) onto stack(0x%x)\n", layer,
stack);
PR_ASSERT(PR_SUCCESS == rv);
/* push a data procesing layer */
layer = PR_CreateIOLayerStub(identity, &myMethods);
rv = PR_PushIOLayer(stack, PR_GetLayersIdentity(stack), layer);
if (verbosity > quiet)
PR_fprintf(logFile, "Pushed layer(0x%x) onto stack(0x%x)\n", layer,
stack);
PR_ASSERT(PR_SUCCESS == rv);
/* push another dummy layer */
tmp_identity = PR_GetUniqueIdentity("Dummy 2");
layer = PR_CreateIOLayerStub(tmp_identity, PR_GetDefaultIOMethods());
rv = PR_PushIOLayer(stack, PR_GetLayersIdentity(stack), layer);
if (verbosity > quiet)
PR_fprintf(logFile, "Pushed layer(0x%x) onto stack(0x%x)\n", layer,
stack);
PR_ASSERT(PR_SUCCESS == rv);
return stack;
} /* PushLayer */
#if 0
static PRFileDesc *PopLayer(PRFileDesc *stack)
{
PRFileDesc *popped = PR_PopIOLayer(stack, identity);
if (verbosity > quiet)
PR_fprintf(logFile, "Popped layer(0x%x) from stack(0x%x)\n", popped, stack);
popped->dtor(popped);
return stack;
} /* PopLayer */
#endif
static void PR_CALLBACK Client(void *arg)
{
PRStatus rv;
PRUint8 buffer[100];
PRIntn empty_flags = 0;
PRIntn bytes_read, bytes_sent;
PRFileDesc *stack = (PRFileDesc*)arg;
/* Initialize the buffer so that Purify won't complain */
memset(buffer, 0, sizeof(buffer));
rv = PR_Connect(stack, &server_address, PR_INTERVAL_NO_TIMEOUT);
PR_ASSERT(PR_SUCCESS == rv);
while (minor_iterations-- > 0)
{
bytes_sent = PR_Send(
stack, buffer, sizeof(buffer), empty_flags, PR_INTERVAL_NO_TIMEOUT);
PR_ASSERT(sizeof(buffer) == bytes_sent);
if (verbosity > chatty)
PR_fprintf(logFile, "Client sending %d bytes\n", bytes_sent);
bytes_read = PR_Recv(
stack, buffer, bytes_sent, empty_flags, PR_INTERVAL_NO_TIMEOUT);
if (verbosity > chatty)
PR_fprintf(logFile, "Client receiving %d bytes\n", bytes_read);
PR_ASSERT(bytes_read == bytes_sent);
}
if (verbosity > quiet)
PR_fprintf(logFile, "Client shutting down stack\n");
rv = PR_Shutdown(stack, PR_SHUTDOWN_BOTH); PR_ASSERT(PR_SUCCESS == rv);
} /* Client */
static void PR_CALLBACK Server(void *arg)
{
PRStatus rv;
PRUint8 buffer[100];
PRFileDesc *service;
PRUintn empty_flags = 0;
PRIntn bytes_read, bytes_sent;
PRFileDesc *stack = (PRFileDesc*)arg;
PRNetAddr client_address;
service = PR_Accept(stack, &client_address, PR_INTERVAL_NO_TIMEOUT);
if (verbosity > quiet)
PR_fprintf(logFile, "Server accepting connection\n");
do
{
bytes_read = PR_Recv(
service, buffer, sizeof(buffer), empty_flags, PR_INTERVAL_NO_TIMEOUT);
if (0 != bytes_read)
{
if (verbosity > chatty)
PR_fprintf(logFile, "Server receiving %d bytes\n", bytes_read);
PR_ASSERT(bytes_read > 0);
bytes_sent = PR_Send(
service, buffer, bytes_read, empty_flags, PR_INTERVAL_NO_TIMEOUT);
if (verbosity > chatty)
PR_fprintf(logFile, "Server sending %d bytes\n", bytes_sent);
PR_ASSERT(bytes_read == bytes_sent);
}
} while (0 != bytes_read);
if (verbosity > quiet)
PR_fprintf(logFile, "Server shutting down and closing stack\n");
rv = PR_Shutdown(service, PR_SHUTDOWN_BOTH); PR_ASSERT(PR_SUCCESS == rv);
rv = PR_Close(service); PR_ASSERT(PR_SUCCESS == rv);
} /* Server */
static PRInt32 PR_CALLBACK MyRecv(
PRFileDesc *fd, void *buf, PRInt32 amount,
PRIntn flags, PRIntervalTime timeout)
{
char *b = (char*)buf;
PRFileDesc *lo = fd->lower;
PRInt32 rv, readin = 0, request = 0;
rv = lo->methods->recv(lo, &request, sizeof(request), flags, timeout);
if (verbosity > chatty) PR_fprintf(
logFile, "MyRecv sending permission for %d bytes\n", request);
if (0 < rv)
{
if (verbosity > chatty) PR_fprintf(
logFile, "MyRecv received permission request for %d bytes\n", request);
rv = lo->methods->send(
lo, &request, sizeof(request), flags, timeout);
if (0 < rv)
{
if (verbosity > chatty) PR_fprintf(
logFile, "MyRecv sending permission for %d bytes\n", request);
while (readin < request)
{
rv = lo->methods->recv(
lo, b + readin, amount - readin, flags, timeout);
if (rv <= 0) break;
if (verbosity > chatty) PR_fprintf(
logFile, "MyRecv received %d bytes\n", rv);
readin += rv;
}
rv = readin;
}
}
return rv;
} /* MyRecv */
static PRInt32 PR_CALLBACK MySend(
PRFileDesc *fd, const void *buf, PRInt32 amount,
PRIntn flags, PRIntervalTime timeout)
{
PRFileDesc *lo = fd->lower;
const char *b = (const char*)buf;
PRInt32 rv, wroteout = 0, request;
if (verbosity > chatty) PR_fprintf(
logFile, "MySend asking permission to send %d bytes\n", amount);
rv = lo->methods->send(lo, &amount, sizeof(amount), flags, timeout);
if (0 < rv)
{
rv = lo->methods->recv(
lo, &request, sizeof(request), flags, timeout);
if (0 < rv)
{
PR_ASSERT(request == amount);
if (verbosity > chatty) PR_fprintf(
logFile, "MySend got permission to send %d bytes\n", request);
while (wroteout < request)
{
rv = lo->methods->send(
lo, b + wroteout, request - wroteout, flags, timeout);
if (rv <= 0) break;
if (verbosity > chatty) PR_fprintf(
logFile, "MySend wrote %d bytes\n", rv);
wroteout += rv;
}
rv = amount;
}
}
return rv;
} /* MySend */
static Verbosity ChangeVerbosity(Verbosity verbosity, PRIntn delta)
{
PRIntn verbage = (PRIntn)verbosity + delta;
if (verbage < (PRIntn)silent) verbage = (PRIntn)silent;
else if (verbage > (PRIntn)noisy) verbage = (PRIntn)noisy;
return (Verbosity)verbage;
} /* ChangeVerbosity */
int main(int argc, char **argv)
{
PRStatus rv;
PRIntn mits;
PLOptStatus os;
PRFileDesc *client, *service;
PRFileDesc *client_stack, *service_stack;
PRNetAddr any_address;
const char *server_name = NULL;
const PRIOMethods *stubMethods;
PRThread *client_thread, *server_thread;
PRThreadScope thread_scope = PR_LOCAL_THREAD;
PLOptState *opt = PL_CreateOptState(argc, argv, "dqGC:c:p:");
while (PL_OPT_EOL != (os = PL_GetNextOpt(opt)))
{
if (PL_OPT_BAD == os) continue;
switch (opt->option)
{
case 0:
server_name = opt->value;
break;
case 'd': /* debug mode */
if (verbosity < noisy)
verbosity = ChangeVerbosity(verbosity, 1);
break;
case 'q': /* debug mode */
if (verbosity > silent)
verbosity = ChangeVerbosity(verbosity, -1);
break;
case 'G': /* use global threads */
thread_scope = PR_GLOBAL_THREAD;
break;
case 'C': /* number of threads waiting */
major_iterations = atoi(opt->value);
break;
case 'c': /* number of client threads */
minor_iterations = atoi(opt->value);
break;
case 'p': /* default port */
default_port = atoi(opt->value);
break;
default:
break;
}
}
PL_DestroyOptState(opt);
PR_STDIO_INIT();
logFile = PR_GetSpecialFD(PR_StandardError);
identity = PR_GetUniqueIdentity("Dummy");
stubMethods = PR_GetDefaultIOMethods();
/*
** The protocol we're going to implement is one where in order to initiate
** a send, the sender must first solicit permission. Therefore, every
** send is really a send - receive - send sequence.
*/
myMethods = *stubMethods; /* first get the entire batch */
myMethods.recv = MyRecv; /* then override the ones we care about */
myMethods.send = MySend; /* then override the ones we care about */
if (NULL == server_name)
rv = PR_InitializeNetAddr(
PR_IpAddrLoopback, default_port, &server_address);
else
{
rv = PR_StringToNetAddr(server_name, &server_address);
PR_ASSERT(PR_SUCCESS == rv);
rv = PR_InitializeNetAddr(
PR_IpAddrNull, default_port, &server_address);
}
PR_ASSERT(PR_SUCCESS == rv);
/* one type w/o layering */
mits = minor_iterations;
while (major_iterations-- > 0)
{
if (verbosity > silent)
PR_fprintf(logFile, "Beginning non-layered test\n");
client = PR_NewTCPSocket(); PR_ASSERT(NULL != client);
service = PR_NewTCPSocket(); PR_ASSERT(NULL != service);
rv = PR_InitializeNetAddr(PR_IpAddrAny, default_port, &any_address);
PR_ASSERT(PR_SUCCESS == rv);
rv = PR_Bind(service, &any_address); PR_ASSERT(PR_SUCCESS == rv);
rv = PR_Listen(service, 10); PR_ASSERT(PR_SUCCESS == rv);
minor_iterations = mits;
server_thread = PR_CreateThread(
PR_USER_THREAD, Server, service,
PR_PRIORITY_HIGH, thread_scope,
PR_JOINABLE_THREAD, 16 * 1024);
PR_ASSERT(NULL != server_thread);
client_thread = PR_CreateThread(
PR_USER_THREAD, Client, client,
PR_PRIORITY_NORMAL, thread_scope,
PR_JOINABLE_THREAD, 16 * 1024);
PR_ASSERT(NULL != client_thread);
rv = PR_JoinThread(client_thread);
PR_ASSERT(PR_SUCCESS == rv);
rv = PR_JoinThread(server_thread);
PR_ASSERT(PR_SUCCESS == rv);
rv = PR_Close(client); PR_ASSERT(PR_SUCCESS == rv);
rv = PR_Close(service); PR_ASSERT(PR_SUCCESS == rv);
if (verbosity > silent)
PR_fprintf(logFile, "Ending non-layered test\n");
/* with layering */
if (verbosity > silent)
PR_fprintf(logFile, "Beginning layered test\n");
client = PR_NewTCPSocket(); PR_ASSERT(NULL != client);
PushLayer(client);
service = PR_NewTCPSocket(); PR_ASSERT(NULL != service);
PushLayer(service);
rv = PR_InitializeNetAddr(PR_IpAddrAny, default_port, &any_address);
PR_ASSERT(PR_SUCCESS == rv);
rv = PR_Bind(service, &any_address); PR_ASSERT(PR_SUCCESS == rv);
rv = PR_Listen(service, 10); PR_ASSERT(PR_SUCCESS == rv);
minor_iterations = mits;
server_thread = PR_CreateThread(
PR_USER_THREAD, Server, service,
PR_PRIORITY_HIGH, thread_scope,
PR_JOINABLE_THREAD, 16 * 1024);
PR_ASSERT(NULL != server_thread);
client_thread = PR_CreateThread(
PR_USER_THREAD, Client, client,
PR_PRIORITY_NORMAL, thread_scope,
PR_JOINABLE_THREAD, 16 * 1024);
PR_ASSERT(NULL != client_thread);
rv = PR_JoinThread(client_thread);
PR_ASSERT(PR_SUCCESS == rv);
rv = PR_JoinThread(server_thread);
PR_ASSERT(PR_SUCCESS == rv);
rv = PR_Close(client); PR_ASSERT(PR_SUCCESS == rv);
rv = PR_Close(service); PR_ASSERT(PR_SUCCESS == rv);
/* with layering, using new style stack */
if (verbosity > silent)
PR_fprintf(logFile,
"Beginning layered test with new style stack\n");
client = PR_NewTCPSocket(); PR_ASSERT(NULL != client);
client_stack = PR_CreateIOLayer(client);
PushNewLayers(client_stack);
service = PR_NewTCPSocket(); PR_ASSERT(NULL != service);
service_stack = PR_CreateIOLayer(service);
PushNewLayers(service_stack);
rv = PR_InitializeNetAddr(PR_IpAddrAny, default_port, &any_address);
PR_ASSERT(PR_SUCCESS == rv);
rv = PR_Bind(service, &any_address); PR_ASSERT(PR_SUCCESS == rv);
rv = PR_Listen(service, 10); PR_ASSERT(PR_SUCCESS == rv);
minor_iterations = mits;
server_thread = PR_CreateThread(
PR_USER_THREAD, Server, service_stack,
PR_PRIORITY_HIGH, thread_scope,
PR_JOINABLE_THREAD, 16 * 1024);
PR_ASSERT(NULL != server_thread);
client_thread = PR_CreateThread(
PR_USER_THREAD, Client, client_stack,
PR_PRIORITY_NORMAL, thread_scope,
PR_JOINABLE_THREAD, 16 * 1024);
PR_ASSERT(NULL != client_thread);
rv = PR_JoinThread(client_thread);
PR_ASSERT(PR_SUCCESS == rv);
rv = PR_JoinThread(server_thread);
PR_ASSERT(PR_SUCCESS == rv);
rv = PR_Close(client_stack); PR_ASSERT(PR_SUCCESS == rv);
rv = PR_Close(service_stack); PR_ASSERT(PR_SUCCESS == rv);
if (verbosity > silent)
PR_fprintf(logFile, "Ending layered test\n");
}
return 0;
} /* main */
/* layer.c */
Ссылка в новой задаче Показать git blame Копировать постоянную ссылку