pjs/js/ref/prtime.c

586 строки
16 KiB
C

/* -*- Mode: C; tab-width: 8; indent-tabs-mode: nil; c-basic-offset: 4 -*-
*
* The contents of this file are subject to the Netscape Public License
* Version 1.0 (the "NPL"); you may not use this file except in
* compliance with the NPL. You may obtain a copy of the NPL at
* http://www.mozilla.org/NPL/
*
* Software distributed under the NPL is distributed on an "AS IS" basis,
* WITHOUT WARRANTY OF ANY KIND, either express or implied. See the NPL
* for the specific language governing rights and limitations under the
* NPL.
*
* The Initial Developer of this code under the NPL is Netscape
* Communications Corporation. Portions created by Netscape are
* Copyright (C) 1998 Netscape Communications Corporation. All Rights
* Reserved.
*/
/*
* PR time code.
*
* XXXbe PR_DSTOffset uses PR_basetime, should use A.D.Olson code instead
*/
#ifdef SOLARIS
#define _REENTRANT 1
#endif
#include <string.h>
#include <time.h>
#include "prtypes.h"
#include "prosdep.h"
#include "prprintf.h"
#include "prtime.h"
#define PR_DO_MILLISECONDS 1
#ifdef XP_PC
#include <sys/timeb.h>
#endif
#ifdef XP_MAC
#include <OSUtils.h>
#include <TextUtils.h>
#include <Resources.h>
#include <Timer.h>
#endif
#ifdef XP_UNIX
#ifdef SOLARIS
extern int gettimeofday(struct timeval *tv);
#endif
#include <sys/time.h>
#ifdef NEED_TIME_R
/* Awful hack, but... */
struct tm *gmtime_r(const time_t *a, struct tm *b)
{
*b = *gmtime(a);
return b;
}
struct tm *localtime_r(const time_t *a, struct tm *b)
{
*b = *localtime(a);
return b;
}
#endif /* NEED_TIME_R */
#endif /* XP_UNIX */
#ifdef XP_MAC
UnsignedWide dstLocalBaseMicroseconds;
unsigned long gJanuaryFirst1970Seconds;
static void MacintoshInitializeTime(void)
{
UnsignedWide upTime;
unsigned long currentLocalTimeSeconds,
startupTimeSeconds;
uint64 startupTimeMicroSeconds;
uint32 upTimeSeconds;
uint64 oneMillion, upTimeSecondsLong, microSecondsToSeconds;
DateTimeRec firstSecondOfUnixTime;
// Figure out in local time what time the machine
// started up. This information can be added to
// upTime to figure out the current local time
// as well as GMT.
Microseconds(&upTime);
GetDateTime(&currentLocalTimeSeconds);
LL_I2L(microSecondsToSeconds, PR_USEC_PER_SEC);
LL_DIV(upTimeSecondsLong, *((uint64 *)&upTime), microSecondsToSeconds);
LL_L2I(upTimeSeconds, upTimeSecondsLong);
startupTimeSeconds = currentLocalTimeSeconds - upTimeSeconds;
// Make sure that we normalize the macintosh base seconds
// to the unix base of January 1, 1970.
firstSecondOfUnixTime.year = 1970;
firstSecondOfUnixTime.month = 1;
firstSecondOfUnixTime.day = 1;
firstSecondOfUnixTime.hour = 0;
firstSecondOfUnixTime.minute = 0;
firstSecondOfUnixTime.second = 0;
firstSecondOfUnixTime.dayOfWeek = 0;
DateToSeconds(&firstSecondOfUnixTime, &gJanuaryFirst1970Seconds);
startupTimeSeconds -= gJanuaryFirst1970Seconds;
// Now convert the startup time into a wide so that we
// can figure out GMT and DST.
LL_I2L(startupTimeMicroSeconds, startupTimeSeconds);
LL_I2L(oneMillion, PR_USEC_PER_SEC);
LL_MUL(dstLocalBaseMicroseconds, oneMillion, startupTimeMicroSeconds);
}
// Because serial port and SLIP conflict with ReadXPram calls,
// we cache the call here
static void MyReadLocation(MachineLocation * loc)
{
static MachineLocation storedLoc; // InsideMac, OSUtilities, page 4-20
static PRBool didReadLocation = PR_FALSE;
if (!didReadLocation)
{
MacintoshInitializeTime();
ReadLocation(&storedLoc);
didReadLocation = PR_TRUE;
}
*loc = storedLoc;
}
#endif
#define IS_LEAP(year) \
(year != 0 && ((((year & 0x3) == 0) && \
((year - ((year/100) * 100)) != 0)) || \
(year - ((year/400) * 400)) == 0))
#define PR_HOUR_SECONDS 3600L
#define PR_DAY_SECONDS (24L * PR_HOUR_SECONDS)
#define PR_YEAR_SECONDS (PR_DAY_SECONDS * 365L)
#define PR_MAX_UNIX_TIMET 2145859200L /*time_t value equiv. to 12/31/2037 */
/* function prototypes */
static void PR_basetime(int64 tsecs, PRTime *prtm);
/*
* get the difference in seconds between this time zone and UTC (GMT)
*/
PR_PUBLIC_API(time_t)
PR_LocalGMTDifference()
{
#if defined(XP_UNIX) || defined(XP_PC)
struct tm ltime;
/* get the difference between this time zone and GMT */
memset((char *)&ltime,0,sizeof(ltime));
ltime.tm_mday = 2;
ltime.tm_year = 70;
#ifdef SUNOS4
ltime.tm_zone = 0;
ltime.tm_gmtoff = 0;
return timelocal(&ltime) - (24 * 3600);
#else
return mktime(&ltime) - (24L * 3600L);
#endif
#endif
#if defined(XP_MAC)
static time_t zone = -1L;
MachineLocation machineLocation;
uint64 gmtOffsetSeconds;
uint64 gmtDelta;
uint64 dlsOffset;
int32 offset;
/* difference has been set no need to recalculate */
if(zone != -1)
return zone;
/* Get the information about the local machine, including
* its GMT offset and its daylight savings time info.
* Convert each into wides that we can add to
* startupTimeMicroSeconds.
*/
MyReadLocation(&machineLocation);
/* Mask off top eight bits of gmtDelta, sign extend lower three. */
if ((machineLocation.u.gmtDelta & 0x00800000) != 0) {
gmtOffsetSeconds.lo = (machineLocation.u.gmtDelta & 0x00FFFFFF) | 0xFF000000;
gmtOffsetSeconds.hi = 0xFFFFFFFF;
LL_UI2L(gmtDelta,0);
} else {
gmtOffsetSeconds.lo = (machineLocation.u.gmtDelta & 0x00FFFFFF);
gmtOffsetSeconds.hi = 0;
LL_UI2L(gmtDelta,PR_DAY_SECONDS);
}
/*
* Normalize time to be positive if you are behind GMT. gmtDelta will
* always be positive.
*/
LL_SUB(gmtDelta,gmtDelta,gmtOffsetSeconds);
/* Is Daylight Savings On? If so, we need to add an hour to the offset. */
if (machineLocation.u.dlsDelta != 0) {
LL_UI2L(dlsOffset, PR_HOUR_SECONDS);
} else {
LL_I2L(dlsOffset, 0);
}
LL_ADD(gmtDelta,gmtDelta, dlsOffset);
LL_L2I(offset,gmtDelta);
zone = offset;
return (time_t)offset;
#endif
}
/* Constants for GMT offset from 1970 */
#define G1970GMTMICROHI 0x00dcdcad /* micro secs to 1970 hi */
#define G1970GMTMICROLOW 0x8b3fa000 /* micro secs to 1970 low */
#define G2037GMTMICROHI 0x00e45fab /* micro secs to 2037 high */
#define G2037GMTMICROLOW 0x7a238000 /* micro secs to 2037 low */
/* Convert from base time to extended time */
static int64
PR_ToExtendedTime(int32 time)
{
int64 exttime;
int64 g1970GMTMicroSeconds;
int64 low;
time_t diff;
int64 tmp;
int64 tmp1;
diff = PR_LocalGMTDifference();
LL_UI2L(tmp, PR_USEC_PER_SEC);
LL_I2L(tmp1,diff);
LL_MUL(tmp,tmp,tmp1);
LL_UI2L(g1970GMTMicroSeconds,G1970GMTMICROHI);
LL_UI2L(low,G1970GMTMICROLOW);
#ifndef HAVE_LONG_LONG
LL_SHL(g1970GMTMicroSeconds,g1970GMTMicroSeconds,16);
LL_SHL(g1970GMTMicroSeconds,g1970GMTMicroSeconds,16);
#else
LL_SHL(g1970GMTMicroSeconds,g1970GMTMicroSeconds,32);
#endif
LL_ADD(g1970GMTMicroSeconds,g1970GMTMicroSeconds,low);
LL_I2L(exttime,time);
LL_ADD(exttime,exttime,g1970GMTMicroSeconds);
LL_SUB(exttime,exttime,tmp);
return exttime;
}
PR_PUBLIC_API(int64)
PR_Now(void)
{
#ifdef XP_PC
int64 s, us, ms2us, s2us;
struct timeb b;
#endif /* XP_PC */
#ifdef XP_UNIX
struct timeval tv;
int64 s, us, s2us;
#endif /* XP_UNIX */
#ifdef XP_MAC
UnsignedWide upTime;
int64 localTime;
int64 gmtOffset;
int64 dstOffset;
time_t gmtDiff;
int64 s2us;
#endif /* XP_MAC */
#ifdef XP_PC
ftime(&b);
LL_UI2L(ms2us, PR_USEC_PER_MSEC);
LL_UI2L(s2us, PR_USEC_PER_SEC);
LL_UI2L(s, b.time);
LL_UI2L(us, b.millitm);
LL_MUL(us, us, ms2us);
LL_MUL(s, s, s2us);
LL_ADD(s, s, us);
return s;
#endif
#ifdef XP_UNIX
#if defined(SOLARIS)
gettimeofday(&tv);
#else
gettimeofday(&tv, 0);
#endif /* SOLARIS */
LL_UI2L(s2us, PR_USEC_PER_SEC);
LL_UI2L(s, tv.tv_sec);
LL_UI2L(us, tv.tv_usec);
LL_MUL(s, s, s2us);
LL_ADD(s, s, us);
return s;
#endif /* XP_UNIX */
#ifdef XP_MAC
LL_UI2L(localTime,0);
gmtDiff = PR_LocalGMTDifference();
LL_I2L(gmtOffset,gmtDiff);
LL_UI2L(s2us, PR_USEC_PER_SEC);
LL_MUL(gmtOffset,gmtOffset,s2us);
LL_UI2L(dstOffset,0);
dstOffset = PR_DSTOffset(dstOffset);
LL_SUB(gmtOffset,gmtOffset,dstOffset);
/* don't adjust for DST since it sets ctime and gmtime off on the MAC */
Microseconds(&upTime);
LL_ADD(localTime,localTime,gmtOffset);
LL_ADD(localTime,localTime, *((uint64 *)&dstLocalBaseMicroseconds));
LL_ADD(localTime,localTime, *((uint64 *)&upTime));
return *((uint64 *)&localTime);
#endif /* XP_MAC */
}
/* Get the DST timezone offset for the time passed in
*/
PR_PUBLIC_API(int64)
PR_DSTOffset(int64 time)
{
int64 us2s;
#ifdef XP_MAC
MachineLocation machineLocation;
int64 dlsOffset;
/*
* Get the information about the local machine, including
* its GMT offset and its daylight savings time info.
* Convert each into wides that we can add to
* startupTimeMicroSeconds.
*/
MyReadLocation(&machineLocation);
/* Is Daylight Savings On? If so, we need to add an hour to the offset. */
if (machineLocation.u.dlsDelta != 0) {
LL_UI2L(us2s, PR_USEC_PER_SEC); /* seconds in a microseconds */
LL_UI2L(dlsOffset, PR_HOUR_SECONDS); /* seconds in one hour */
LL_MUL(dlsOffset, dlsOffset, us2s);
} else {
LL_I2L(dlsOffset, 0);
}
return(dlsOffset);
#else /* XP_PC || XP_UNIX */
time_t local;
int32 diff;
int64 maxtimet;
struct tm tm;
PRTime prtm;
#if defined( XP_PC ) || defined( FREEBSD ) || defined ( HPUX9 ) || defined ( SNI )
struct tm *ptm;
#endif
LL_UI2L(us2s, PR_USEC_PER_SEC);
LL_DIV(time, time, us2s);
/* get the maximum of time_t value */
LL_UI2L(maxtimet,PR_MAX_UNIX_TIMET);
if (LL_CMP(time,>,maxtimet)) {
LL_UI2L(time,PR_MAX_UNIX_TIMET);
} else if (!LL_GE_ZERO(time) || LL_IS_ZERO(time)) {
/* go ahead a day to make localtime work (does not work with 0) */
LL_UI2L(time,PR_DAY_SECONDS);
}
LL_L2UI(local,time);
PR_basetime(time,&prtm);
#if defined( XP_PC ) || defined( FREEBSD ) || defined ( HPUX9 ) || defined ( SNI )
ptm = localtime(&local);
if (!ptm)
return LL_ZERO;
tm = *ptm;
#else
localtime_r(&local,&tm); /* get dst information */
#endif
diff = ((tm.tm_hour - prtm.tm_hour) * PR_HOUR_SECONDS)
+ ((tm.tm_min - prtm.tm_min) * 60);
if (diff < 0)
diff += PR_DAY_SECONDS;
LL_UI2L(time,diff);
LL_MUL(time,time,us2s);
return(time);
#endif /* XP_PC || XP_UNIX */
}
/* Format a time value into a buffer. Same semantics as strftime() */
PR_PUBLIC_API(size_t)
PR_FormatTime(char *buf, int buflen, char *fmt, PRTime *prtm)
{
#if defined(XP_UNIX) || defined(XP_PC) || defined(XP_MAC)
struct tm a;
/* Zero out the tm struct. Linux, SunOS 4 struct tm has extra members int
* tm_gmtoff, char *tm_zone; when tm_zone is garbage, strftime gets
* confused and dumps core. NSPR20 prtime.c attempts to fill these in by
* calling mktime on the partially filled struct, but this doesn't seem to
* work as well; the result string has "can't get timezone" for ECMA-valid
* years. Might still make sense to use this, but find the range of years
* for which valid tz information exists, and map (per ECMA hint) from the
* given year into that range.
* N.B. This hasn't been tested with anything that actually _uses_
* tm_gmtoff; zero might be the wrong thing to set it to if you really need
* to format a time. This fix is for jsdate.c, which only uses
* PR_FormatTime to get a string representing the time zone. */
memset(&a, 0, sizeof(struct tm));
a.tm_sec = prtm->tm_sec;
a.tm_min = prtm->tm_min;
a.tm_hour = prtm->tm_hour;
a.tm_mday = prtm->tm_mday;
a.tm_mon = prtm->tm_mon;
a.tm_wday = prtm->tm_wday;
a.tm_year = prtm->tm_year - 1900;
a.tm_yday = prtm->tm_yday;
a.tm_isdst = prtm->tm_isdst;
/* Even with the above, SunOS 4 seems to detonate if tm_zone and tm_gmtoff
* are null. This doesn't quite work, though - the timezone is off by
* tzoff + dst. (And mktime seems to return -1 for the exact dst
* changeover time.)
* Still not sure if MKLINUX is necessary; this is borrowed from the NSPR20
* prtime.c. I'm leaving it out - My Linux does the right thing without it
* (and the wrong thing with it) even though it has the tm_gmtoff, tm_zone
* fields. Linux seems to be happy so long as the tm struct is zeroed out.
* The #ifdef in nspr is:
* #if defined(SUNOS4) || defined(MKLINUX) || defined (__GLIBC >= 2)
*/
#if defined(SUNOS4)
if (mktime(&a) == -1) {
/* Seems to fail whenever the requested date is outside of the 32-bit
* UNIX epoch. We could proceed at this point (setting a.tm_zone to
* "") but then strftime returns a string with a 2-digit field of
* garbage for the year. So we return 0 and hope jsdate.c
* will fall back on toString.
*/
return 0;
}
#endif
return strftime(buf, buflen, fmt, &a);
#endif
}
/* table for number of days in a month */
static int mtab[] = {
/* jan, feb,mar,apr,may,jun */
31,28,31,30,31,30,
/* july,aug,sep,oct,nov,dec */
31,31,30,31,30,31
};
/*
* basic time calculation functionality for localtime and gmtime
* setups up prtm argument with correct values based upon input number
* of seconds.
*/
static void
PR_basetime(int64 tsecs, PRTime *prtm)
{
/* convert tsecs back to year,month,day,hour,secs */
int32 year = 0;
int32 month = 0;
int32 yday = 0;
int32 mday = 0;
int32 wday = 6; /* start on a Sunday */
int32 days = 0;
int32 seconds = 0;
int32 minutes = 0;
int32 hours = 0;
int32 isleap = 0;
int64 result;
int64 result1;
int64 result2;
int64 base;
LL_UI2L(result,0);
LL_UI2L(result1,0);
LL_UI2L(result2,0);
/* get the base time via UTC */
base = PR_ToExtendedTime(0);
LL_UI2L(result, PR_USEC_PER_SEC);
LL_DIV(base,base,result);
LL_ADD(tsecs,tsecs,base);
LL_UI2L(result, PR_YEAR_SECONDS);
LL_UI2L(result1,PR_DAY_SECONDS);
LL_ADD(result2,result,result1);
/* get the year */
while ((isleap == 0) ? !LL_CMP(tsecs,<,result) : !LL_CMP(tsecs,<,result2)) {
/* subtract a year from tsecs */
LL_SUB(tsecs,tsecs,result);
days += 365;
/* is it a leap year ? */
if(IS_LEAP(year)){
LL_SUB(tsecs,tsecs,result1);
days++;
}
year++;
isleap = IS_LEAP(year);
}
LL_UI2L(result1,PR_DAY_SECONDS);
LL_DIV(result,tsecs,result1);
LL_L2I(mday,result);
/* let's find the month */
while(((month == 1 && isleap) ?
(mday >= mtab[month] + 1) :
(mday >= mtab[month]))){
yday += mtab[month];
days += mtab[month];
mday -= mtab[month];
/* it's a Feb, check if this is a leap year */
if(month == 1 && isleap != 0){
yday++;
days++;
mday--;
}
month++;
}
/* now adjust tsecs */
LL_MUL(result,result,result1);
LL_SUB(tsecs,tsecs,result);
mday++; /* day of month always start with 1 */
days += mday;
wday = (days + wday) % 7;
yday += mday;
/* get the hours */
LL_UI2L(result1,PR_HOUR_SECONDS);
LL_DIV(result,tsecs,result1);
LL_L2I(hours,result);
LL_MUL(result,result,result1);
LL_SUB(tsecs,tsecs,result);
/* get minutes */
LL_UI2L(result1,60);
LL_DIV(result,tsecs,result1);
LL_L2I(minutes,result);
LL_MUL(result,result,result1);
LL_SUB(tsecs,tsecs,result);
LL_L2I(seconds,tsecs);
prtm->tm_usec = 0L;
prtm->tm_sec = (int8)seconds;
prtm->tm_min = (int8)minutes;
prtm->tm_hour = (int8)hours;
prtm->tm_mday = (int8)mday;
prtm->tm_mon = (int8)month;
prtm->tm_wday = (int8)wday;
prtm->tm_year = (int16)year;
prtm->tm_yday = (int16)yday;
}