pjs/toolkit/xre/nsCommandLineServiceMac.cpp

/* -*- Mode: C++; tab-width: 4; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is Mozilla Communicator client code.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *   Simon Fraser   <sfraser@netscape.com>
 *   Pierre Phaneuf <pp@ludusdesign.com>
 *   Mark Mentovai <mark@moxienet.com>
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either the GNU General Public License Version 2 or later (the "GPL"), or
 * the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

// Special stuff for the Macintosh implementation of command-line service.

#include "nsCommandLineServiceMac.h"

// Mozilla
#include "nsDebug.h"
#include "nsILocalFileMac.h"
#include "nsDebug.h"
#include "nsNetUtil.h"
#include "nsIAppStartup.h"
#include "nsIServiceManager.h"
#include "nsIURL.h"
#include "nsIIOService.h"
#include "nsIURL.h"
#include "nsIServiceManager.h"
#include "nsNetCID.h"
#include "nsIDOMWindow.h"
#include "nsXPCOM.h"
#include "nsISupportsPrimitives.h"
#include "nsIWindowWatcher.h"
#include "jsapi.h"
#include "nsReadableUtils.h"
#include "nsICloseAllWindows.h"
#include "nsIPrefService.h"

#include "nsAEEventHandling.h"
#include "nsXPFEComponentsCID.h"

// NSPR
#include "prmem.h"
#include "plstr.h"
#include "prenv.h"

// the static instance
nsMacCommandLine nsMacCommandLine::sMacCommandLine;

/*
 * ReadLine --
 *
 * Read in a line of text, terminated by CR or LF, from inStream into buf.
 * The terminating CR or LF is not included.  The text in buf is terminated
 * by a null byte.
 * Returns the number of bytes in buf.  If EOF and zero bytes were read, returns -1.
 */

static PRInt32 ReadLine(FILE* inStream, char* buf, PRInt32 bufSize)
{
  PRInt32 charsRead = 0;
  int c;
  
  if (bufSize < 2)
    return -1;

  while (charsRead < (bufSize-1)) {
    c = getc(inStream);
    if (c == EOF || c == '\n' || c == '\r')
      break;
    buf[charsRead++] = c;
  }
  buf[charsRead] = '\0';
  
  return (c == EOF && !charsRead) ? -1 : charsRead; 
}

static PRUint32
ProcessAppleEvents()
{
  // Dispatch all of the Apple Events waiting in the event queue.

  PRUint32 processed = 0;

  const EventTypeSpec kAppleEventList[] = {
    { kEventClassAppleEvent, kEventAppleEvent },
  };

  EventRef carbonEvent;
  while (::ReceiveNextEvent(GetEventTypeCount(kAppleEventList),
                            kAppleEventList,
                            kEventDurationNoWait,
                            PR_TRUE,
                            &carbonEvent) == noErr) {
    EventRecord eventRecord;
    ::ConvertEventRefToEventRecord(carbonEvent, &eventRecord);
    ::AEProcessAppleEvent(&eventRecord);
    ::ReleaseEvent(carbonEvent);
    processed++;
  }

  return processed;
}

//----------------------------------------------------------------------------------------
nsMacCommandLine::nsMacCommandLine()
: mArgs(NULL)
, mArgsAllocated(0)
, mArgsUsed(0)
, mStartedUp(PR_FALSE)
//----------------------------------------------------------------------------------------
{
}


//----------------------------------------------------------------------------------------
nsMacCommandLine::~nsMacCommandLine()
//----------------------------------------------------------------------------------------
{
  ShutdownAEHandlerClasses();
  if (mArgs) {
    for (PRUint32 i = 0; i < mArgsUsed; i++)
      free(mArgs[i]);
    free(mArgs);
  }
}


//----------------------------------------------------------------------------------------
nsresult nsMacCommandLine::Initialize(int& argc, char**& argv)
//----------------------------------------------------------------------------------------
{
  mArgs = static_cast<char **>(malloc(kArgsGrowSize * sizeof(char *)));
  if (!mArgs)
    return NS_ERROR_FAILURE;
  mArgs[0] = nsnull;
  mArgsAllocated = kArgsGrowSize;
  mArgsUsed = 0;
  
  // Here, we may actually get useful args.
  // Copy them first to mArgv.
  for (int arg = 0; arg < argc; arg++) {
    char* flag = argv[arg];
    // don't pass on the psn (Process Serial Number) flag from the OS
    if (strncmp(flag, "-psn_", 5) != 0)
      AddToCommandLine(flag);
  }

  // Set up AppleEvent handling.
  OSErr err = CreateAEHandlerClasses(false);
  if (err != noErr) return NS_ERROR_FAILURE;

  // Snarf all the odoc and pdoc apple-events.
  //
  // 1. If they are odoc for 'CMDL' documents, read them into the buffer ready for
  //    parsing (concatenating multiple files).
  //
  // 2. If they are any other kind of document, convert them into -url command-line
  //    parameters or -print parameters, with file URLs.

  // Spin a native event loop to allow AE handlers for waiting events to be
  // called
  ProcessAppleEvents();

  // we've started up now
  mStartedUp = PR_TRUE;
  
  argc = mArgsUsed;
  argv = mArgs;
  
  return NS_OK;
}

//----------------------------------------------------------------------------------------
void nsMacCommandLine::SetupCommandLine(int& argc, char**& argv)
//----------------------------------------------------------------------------------------
{
  // Initializes the command line from Apple Events and other sources,
  // as appropriate for OS X.
  //
  // IMPORTANT: This must be done before XPCOM shutdown if the app is to
  // relaunch (i.e. before the ScopedXPCOMStartup object goes out of scope).
  // XPCOM shutdown can cause other things to process native events, and
  // native event processing can cause the waiting Apple Events to be
  // discarded.

  // Process Apple Events and put them into the arguments.
  Initialize(argc, argv);

  Boolean isForeground = PR_FALSE;
  ProcessSerialNumber psnSelf, psnFront;

  // If the process will be relaunched, the child should be in the foreground
  // if the parent is in the foreground.  This will be communicated in a
  // command-line argument to the child.  Adding this argument is harmless
  // if not relaunching.
  if (::GetCurrentProcess(&psnSelf) == noErr &&
      ::GetFrontProcess(&psnFront) == noErr &&
      ::SameProcess(&psnSelf, &psnFront, &isForeground) == noErr &&
      isForeground) {
    // The process is currently in the foreground.  The relaunched
    // process should come to the front, too.
    AddToCommandLine("-foreground");
  }

  argc = mArgsUsed;
  argv = mArgs;
}

//----------------------------------------------------------------------------------------
nsresult nsMacCommandLine::AddToCommandLine(const char* inArgText)
//----------------------------------------------------------------------------------------
{
  if (mArgsUsed >= mArgsAllocated - 1) {
    // realloc does not free the given pointer if allocation fails.
    char **temp = static_cast<char **>(realloc(mArgs, (mArgsAllocated + kArgsGrowSize) * sizeof(char *)));
    if (!temp)
      return NS_ERROR_OUT_OF_MEMORY;
    mArgs = temp;
    mArgsAllocated += kArgsGrowSize;
  }
  char *temp2 = strdup(inArgText);
  if (!temp2)
    return NS_ERROR_OUT_OF_MEMORY;
  mArgs[mArgsUsed++] = temp2;
  mArgs[mArgsUsed] = nsnull;
  return NS_OK;
}


//----------------------------------------------------------------------------------------
nsresult nsMacCommandLine::AddToCommandLine(const char* inOptionString, const FSSpec& inFileSpec)
//----------------------------------------------------------------------------------------
{
  // Convert the filespec to a URL.  Avoid using xpcom because this may be
  // called before xpcom startup.
  FSRef fsRef;
  if (::FSpMakeFSRef(&inFileSpec, &fsRef) != noErr)
    return NS_ERROR_FAILURE;

  CFURLRef url = ::CFURLCreateFromFSRef(nsnull, &fsRef);
  if (!url)
    return NS_ERROR_FAILURE;

  CFStringRef string = ::CFURLGetString(url);
  if (!string) {
    ::CFRelease(url);
    return NS_ERROR_FAILURE;
  }

  CFIndex length = ::CFStringGetLength(string);
  CFIndex bufLen = 0;
  ::CFStringGetBytes(string, CFRangeMake(0, length), kCFStringEncodingUTF8,
                     0, PR_FALSE, nsnull, 0, &bufLen);

  UInt8 buffer[bufLen + 1];
  if (!buffer) {
    ::CFRelease(url);
    return NS_ERROR_FAILURE;
  }

  ::CFStringGetBytes(string, CFRangeMake(0, length), kCFStringEncodingUTF8,
                     0, PR_FALSE, buffer, bufLen, nsnull);
  buffer[bufLen] = 0;

  ::CFRelease(url);

  AddToCommandLine(inOptionString);  
  AddToCommandLine((char*)buffer);

  return NS_OK;
}

//----------------------------------------------------------------------------------------
nsresult nsMacCommandLine::AddToEnvironmentVars(const char* inArgText)
//----------------------------------------------------------------------------------------
{
  (void)PR_SetEnv(inArgText);
  return NS_OK;
}


//----------------------------------------------------------------------------------------
OSErr nsMacCommandLine::HandleOpenOneDoc(const FSSpec& inFileSpec, OSType inFileType)
//----------------------------------------------------------------------------------------
{
  nsCOMPtr<nsILocalFileMac> inFile;
  nsresult rv = NS_NewLocalFileWithFSSpec(&inFileSpec, PR_TRUE, getter_AddRefs(inFile));
  if (NS_FAILED(rv))
    return errAEEventNotHandled;

  if (!mStartedUp)
  {
    // Is it the right type to be a command-line file?
    if (inFileType == 'TEXT' || inFileType == 'CMDL')
    {
      // Can we open the file?
      FILE *fp = 0;
      rv = inFile->OpenANSIFileDesc("r", &fp);
      if (NS_SUCCEEDED(rv))
      {
        Boolean foundArgs = false;
        Boolean foundEnv = false;
        char chars[1024];
        static const char kCommandLinePrefix[] = "ARGS:";
        static const char kEnvVarLinePrefix[] = "ENV:";

        while (ReadLine(fp, chars, sizeof(chars)) != -1)
        {       // See if there are any command line or environment var settings
          if (PL_strstr(chars, kCommandLinePrefix) == chars)
          {
            (void)AddToCommandLine(chars + sizeof(kCommandLinePrefix) - 1);
            foundArgs = true;
          }
          else if (PL_strstr(chars, kEnvVarLinePrefix) == chars)
          {
            (void)AddToEnvironmentVars(chars + sizeof(kEnvVarLinePrefix) - 1);
            foundEnv = true;
          }
        }

        fclose(fp);
        // If we found a command line or environment vars we want to return now
        // raather than trying to open the file as a URL
        if (foundArgs || foundEnv)
          return noErr;
      }
    }
    // If it's not a command-line argument, and we are starting up the application,
    // add a command-line "-url" argument to the global list. This means that if
    // the app is opened with documents on the mac, they'll be handled the same
    // way as if they had been typed on the command line in Unix or DOS.
    return AddToCommandLine("-url", inFileSpec);
  }

  // Final case: we're not just starting up. How do we handle this?
  nsCAutoString specBuf;
  rv = NS_GetURLSpecFromFile(inFile, specBuf);
  if (NS_FAILED(rv))
    return errAEEventNotHandled;
  
  return OpenURL(specBuf.get());
}

OSErr nsMacCommandLine::OpenURL(const char* aURL)
{
  nsresult rv;
  
  nsCOMPtr<nsIPrefBranch> prefBranch(do_GetService(NS_PREFSERVICE_CONTRACTID, &rv));

  nsXPIDLCString browserURL;
  if (NS_SUCCEEDED(rv))
    rv = prefBranch->GetCharPref("browser.chromeURL", getter_Copies(browserURL));
  
  if (NS_FAILED(rv)) {
    NS_WARNING("browser.chromeURL not supplied! How is the app supposed to know what the main window is?");
    browserURL.Assign("chrome://navigator/content/navigator.xul");
  }
     
  rv = OpenWindow(browserURL.get(), NS_ConvertASCIItoUTF16(aURL).get());
  if (NS_FAILED(rv))
    return errAEEventNotHandled;
    
  return noErr;
}



//----------------------------------------------------------------------------------------
OSErr nsMacCommandLine::HandlePrintOneDoc(const FSSpec& inFileSpec, OSType fileType)
//----------------------------------------------------------------------------------------
{
  // If  we are starting up the application,
  // add a command-line "-print" argument to the global list. This means that if
  // the app is opened with documents on the mac, they'll be handled the same
  // way as if they had been typed on the command line in Unix or DOS.
  if (!mStartedUp)
    return AddToCommandLine("-print", inFileSpec);
  
  // Final case: we're not just starting up. How do we handle this?
  NS_NOTYETIMPLEMENTED("Write Me");
  return errAEEventNotHandled;
}



//----------------------------------------------------------------------------------------
nsresult nsMacCommandLine::OpenWindow(const char *chrome, const PRUnichar *url)
//----------------------------------------------------------------------------------------
{
  nsCOMPtr<nsIWindowWatcher> wwatch(do_GetService(NS_WINDOWWATCHER_CONTRACTID));
  nsCOMPtr<nsISupportsString> urlWrapper(do_CreateInstance(NS_SUPPORTS_STRING_CONTRACTID));
  if (!wwatch || !urlWrapper)
    return NS_ERROR_FAILURE;

  urlWrapper->SetData(nsDependentString(url));

  nsCOMPtr<nsIDOMWindow> newWindow;
  nsresult rv;
  rv = wwatch->OpenWindow(0, chrome, "_blank",
               "chrome,dialog=no,all", urlWrapper,
               getter_AddRefs(newWindow));

  return rv;
}

//----------------------------------------------------------------------------------------
OSErr nsMacCommandLine::DispatchURLToNewBrowser(const char* url)
//----------------------------------------------------------------------------------------
{
  OSErr err = errAEEventNotHandled;
  if (mStartedUp)
    return OpenURL(url);
  else {
    err = AddToCommandLine("-url");
    if (err == noErr)
      err = AddToCommandLine(url);
  }
  
  return err;
}

//----------------------------------------------------------------------------------------
OSErr nsMacCommandLine::Quit(TAskSave askSave)
//----------------------------------------------------------------------------------------
{
  nsresult rv;
  
  nsCOMPtr<nsICloseAllWindows> closer =
           do_CreateInstance("@mozilla.org/appshell/closeallwindows;1", &rv);
  if (NS_FAILED(rv))
    return errAEEventNotHandled;

  PRBool doQuit;
  rv = closer->CloseAll(askSave != eSaveNo, &doQuit);
  if (NS_FAILED(rv))
    return errAEEventNotHandled;
  if (!doQuit)
    return userCanceledErr;

  nsCOMPtr<nsIAppStartup> appStartup =
           do_GetService(NS_APPSTARTUP_CONTRACTID, &rv);
  if (NS_FAILED(rv))
    return errAEEventNotHandled;

  appStartup->Quit(nsIAppStartup::eAttemptQuit);
  return noErr;
}

#pragma mark -

//----------------------------------------------------------------------------------------
void SetupMacCommandLine(int& argc, char**& argv)
//----------------------------------------------------------------------------------------
{
  nsMacCommandLine& cmdLine = nsMacCommandLine::GetMacCommandLine();
  return cmdLine.SetupCommandLine(argc, argv);
}