nanoframework
/
ChibiOS-Contrib
зеркало из
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Updated Comp driver for STM32L0

This commit is contained in:
Fabien Poussin 2019-10-29 13:02:35 +01:00
Родитель dc72ea6033
Коммит 03043aa8fa
11 изменённых файлов: 2181 добавлений и 24 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

37
os/hal/ports/STM32/LLD/COMPv1/hal_comp_lld.c
Просмотреть файл

@ -35,11 +35,15 @@
/*===========================================================================*/
#ifndef COMP_CSR_EN
#define COMP_CSR_EN COMP_CSR_COMPxEN
#define COMP_CSR_EN COMP_CSR_COMPxEN
#endif
#ifndef COMP_CSR_POLARITY
#define COMP_CSR_POLARITY COMP_CSR_COMPxPOL
#ifdef COMP_CSR_COMPxPOL
#define COMP_CSR_POLARITY COMP_CSR_COMPxPOL
#else
#define COMP_CSR_POLARITY COMP_CSR_COMPxPOLARITY // L0
#endif
#endif
/*===========================================================================*/
@ -133,7 +137,7 @@ void comp_lld_init(void) {
COMPD1.reg = COMP1;
COMPD1.reg->CSR = 0;
#if STM32_COMP_USE_INTERRUPTS
nvicEnableVector(COMP1_2_3_IRQn, STM32_COMP_1_2_3_IRQ_PRIORITY);
nvicEnableVector(STM32_COMP1_IRQn, STM32_COMP_1_2_3_IRQ_PRIORITY);
#endif
#endif
@ -143,7 +147,7 @@ void comp_lld_init(void) {
COMPD2.reg = COMP2;
COMPD2.reg->CSR = 0;
#if STM32_COMP_USE_INTERRUPTS
nvicEnableVector(COMP1_2_3_IRQn, STM32_COMP_1_2_3_IRQ_PRIORITY);
nvicEnableVector(STM32_COMP2_IRQn, STM32_COMP_1_2_3_IRQ_PRIORITY);
#endif
#endif
@ -153,7 +157,7 @@ void comp_lld_init(void) {
COMPD3.reg = COMP3;
COMPD3.reg->CSR = 0;
#if STM32_COMP_USE_INTERRUPTS
nvicEnableVector(COMP1_2_3_IRQn, STM32_COMP_1_2_3_IRQ_PRIORITY);
nvicEnableVector(STM32_COMP3_IRQn, STM32_COMP_1_2_3_IRQ_PRIORITY);
#endif
#endif
@ -163,7 +167,7 @@ void comp_lld_init(void) {
COMPD4.reg = COMP4;
COMPD4.reg->CSR = 0;
#if STM32_COMP_USE_INTERRUPTS
nvicEnableVector(COMP4_5_6_IRQn, STM32_COMP_1_2_3_IRQ_PRIORITY);
nvicEnableVector(STM32_COMP4_IRQn, STM32_COMP_4_5_6_IRQ_PRIORITY);
#endif
#endif
@ -173,7 +177,7 @@ void comp_lld_init(void) {
COMPD5.reg = COMP5;
COMPD5.reg->CSR = 0;
#if STM32_COMP_USE_INTERRUPTS
nvicEnableVector(COMP4_5_6_IRQn, STM32_COMP_1_2_3_IRQ_PRIORITY);
nvicEnableVector(STM32_COMP5_IRQn, STM32_COMP_4_5_6_IRQ_PRIORITY);
#endif
#endif
@ -183,7 +187,7 @@ void comp_lld_init(void) {
COMPD6.reg = COMP6;
COMPD6.reg->CSR = 0;
#if STM32_COMP_USE_INTERRUPTS
nvicEnableVector(COMP4_5_6_IRQn, STM32_COMP_1_2_3_IRQ_PRIORITY);
nvicEnableVector(STM32_COMP6_IRQn, STM32_COMP_4_5_6_IRQ_PRIORITY);
#endif
#endif
@ -193,7 +197,7 @@ void comp_lld_init(void) {
COMPD7.reg = COMP7;
COMPD7.reg->CSR = 0;
#if STM32_COMP_USE_INTERRUPTS
nvicEnableVector(COMP7_IRQn, STM32_COMP_7_IRQ_PRIORITY);
nvicEnableVector(STM32_COMP7_IRQn, STM32_COMP_7_IRQ_PRIORITY);
#endif
#endif
@ -201,12 +205,13 @@ void comp_lld_init(void) {
#if STM32_COMP_USE_INTERRUPTS
#if STM32_COMP_USE_COMP1 || STM32_COMP_USE_COMP2 || STM32_COMP_USE_COMP3
/**
* @brief COMP1, COMP2, COMP3 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(Vector140) {
OSAL_IRQ_HANDLER(COMP1_2_3_IRQHandler) {
uint32_t pr;
OSAL_IRQ_PROLOGUE();
@ -229,13 +234,15 @@ OSAL_IRQ_HANDLER(Vector140) {
OSAL_IRQ_EPILOGUE();
}
#endif
#if STM32_COMP_USE_COMP4 || STM32_COMP_USE_COMP5 || STM32_COMP_USE_COMP6
/**
* @brief COMP4, COMP5, COMP6 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(Vector144) {
OSAL_IRQ_HANDLER(COMP4_5_6_IRQHandler) {
uint32_t pr;
OSAL_IRQ_PROLOGUE();
@ -261,13 +268,15 @@ OSAL_IRQ_HANDLER(Vector144) {
OSAL_IRQ_EPILOGUE();
}
#endif
#if STM32_COMP_USE_COMP7
/**
* @brief COMP7 interrupt handler.
*
* @isr
*/
OSAL_IRQ_HANDLER(Vector148) {
OSAL_IRQ_HANDLER(COMP7_IRQHandler) {
uint32_t pr2;
OSAL_IRQ_PROLOGUE();
@ -275,13 +284,13 @@ OSAL_IRQ_HANDLER(Vector148) {
pr2 = EXTI->PR2;
pr2 = EXTI->IMR & (1U << 1);
EXTI->PR2 = pr2;
#if STM32_COMP_USE_COMP7
if (pr2 & (1U << 1) && COMPD7.config->cb != NULL)
COMPD7.config->cb(&COMPD7);
#endif
OSAL_IRQ_EPILOGUE();
}
#endif
/**
* @brief Configures and activates an EXT channel (used by comp)

73
os/hal/ports/STM32/LLD/COMPv1/hal_comp_lld.h
Просмотреть файл

@ -57,12 +57,14 @@
PB0 for COMP4, PD12 for COMP5, PD11 for COMP6,
PA0 for COMP7) connected to comparator non inverting input */
#ifdef COMP_CSR_COMPxNONINSEL
#define STM32_COMP_NonInvertingInput_IO2 COMP_CSR_COMPxNONINSEL /*!< I/O2 (PA3 for COMP2, PD14 for COMP3, PE7 for COMP4, PB13 for COMP5,
PB11 for COMP6, PC1 for COMP7) connected to comparator non inverting input */
#endif
#define STM32_COMP_Output_None ((uint32_t)0x00000000) /*!< COMP output isn't connected to other peripherals */
/* Output Redirection common for all comparators COMP1...COMP7 */
#define STM32_COMP_Output_TIM1BKIN COMP_CSR_COMPxOUTSEL_0 /*!< COMP output connected to TIM1 Break Input (BKIN) */
#define STM32_COMP_Output_TIM1BKIN2 ((uint32_t)0x00000800) /*!< COMP output connected to TIM1 Break Input 2 (BKIN2) */
@ -155,10 +157,12 @@
#define STM32_COMP_OutputPol_NonInverted ((uint32_t)0x00000000) /*!< COMP output on GPIO isn't inverted */
#define STM32_COMP_OutputPol_Inverted COMP_CSR_COMPxPOL /*!< COMP output on GPIO is inverted */
#ifdef COMP_CSR_COMPxHYST
#define STM32_COMP_Hysteresis_No 0x00000000 /*!< No hysteresis */
#define STM32_COMP_Hysteresis_Low COMP_CSR_COMPxHYST_0 /*!< Hysteresis level low */
#define STM32_COMP_Hysteresis_Medium COMP_CSR_COMPxHYST_1 /*!< Hysteresis level medium */
#define STM32_COMP_Hysteresis_High COMP_CSR_COMPxHYST /*!< Hysteresis level high */
#endif
#define STM32_COMP_Mode_HighSpeed 0x00000000 /*!< High Speed */
#define STM32_COMP_Mode_MediumSpeed COMP_CSR_COMPxMODE_0 /*!< Medium Speed */
@ -172,9 +176,8 @@
the non-inverting input is at a lower voltage than the inverting input*/
#define STM32_COMP_OutputLevel_Low ((uint32_t)0x00000000)
#if defined(STM32F301x8) || defined(STM32F302x8) || defined(STM32F303x8) \
|| defined(STM32F318xx) || defined(STM32F328xx) || defined(STM32F334x8)
|| defined(STM32F318xx) || defined(STM32F328xx) || defined(STM32F334x8)
#define STM32_HAS_COMP1 FALSE
#define STM32_HAS_COMP2 TRUE
#define STM32_HAS_COMP3 FALSE
@ -183,6 +186,13 @@
#define STM32_HAS_COMP6 TRUE
#define STM32_HAS_COMP7 FALSE
#define STM32_COMP2_IRQn COMP1_2_3_IRQn
#define STM32_COMP4_IRQn COMP4_5_6_IRQn
#define STM32_COMP6_IRQn COMP4_5_6_IRQn
#define STM32_COMP2_HANDLER COMP1_2_3_IRQHandler
#define STM32_COMP4_HANDLER COMP4_5_6_IRQHandler
#define STM32_COMP6_HANDLER COMP4_5_6_IRQHandler
#elif defined(STM32F302xc) || defined(STM32F302xe)
#define STM32_HAS_COMP1 TRUE
#define STM32_HAS_COMP2 TRUE
@ -192,6 +202,15 @@
#define STM32_HAS_COMP6 TRUE
#define STM32_HAS_COMP7 FALSE
#define STM32_COMP1_IRQn COMP1_2_3_IRQn
#define STM32_COMP2_IRQn COMP1_2_3_IRQn
#define STM32_COMP4_IRQn COMP4_5_6_IRQn
#define STM32_COMP6_IRQn COMP4_5_6_IRQn
#define STM32_COMP1_HANDLER COMP1_2_3_IRQHandler
#define STM32_COMP2_HANDLER COMP1_2_3_IRQHandler
#define STM32_COMP4_HANDLER COMP4_5_6_IRQHandler
#define STM32_COMP6_HANDLER COMP4_5_6_IRQHandler
#elif defined(STM32F303xC) || defined(STM32F303xE) || defined(STM32F358xx) || defined(STM32F398xx)
#define STM32_HAS_COMP1 TRUE
#define STM32_HAS_COMP2 TRUE
@ -201,9 +220,22 @@
#define STM32_HAS_COMP6 TRUE
#define STM32_HAS_COMP7 TRUE
#elif defined(STM32F373xx) || defined(STM32F378xx) || defined(STM32L0XX) || defined(STM32L1XX) \
|| defined(STM32F051x8) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F078xx) \
|| defined(STM32F072xb) || defined(STM32F071xb) || defined(STM32L4XX)
#define STM32_COMP1_IRQn COMP1_2_3_IRQn
#define STM32_COMP2_IRQn COMP1_2_3_IRQn
#define STM32_COMP3_IRQn COMP1_2_3_IRQn
#define STM32_COMP4_IRQn COMP4_5_6_IRQn
#define STM32_COMP5_IRQn COMP4_5_6_IRQn
#define STM32_COMP6_IRQn COMP4_5_6_IRQn
#define STM32_COMP7_IRQn COMP7_IRQn
#define STM32_COMP1_HANDLER COMP1_2_3_IRQHandler
#define STM32_COMP2_HANDLER COMP1_2_3_IRQHandler
#define STM32_COMP3_HANDLER COMP1_2_3_IRQHandler
#define STM32_COMP4_HANDLER COMP4_5_6_IRQHandler
#define STM32_COMP5_HANDLER COMP4_5_6_IRQHandler
#define STM32_COMP6_HANDLER COMP4_5_6_IRQHandler
#define STM32_COMP7_HANDLER COMP7_IRQHandler
#elif defined(STM32F373xx) || defined(STM32F378xx) || defined(STM32L1XX) || defined(STM32L4XX)
#define STM32_HAS_COMP1 TRUE
#define STM32_HAS_COMP2 TRUE
#define STM32_HAS_COMP3 FALSE
@ -212,6 +244,31 @@
#define STM32_HAS_COMP6 FALSE
#define STM32_HAS_COMP7 FALSE
#define STM32_COMP1_IRQn COMP_IRQn
#define STM32_COMP2_IRQn COMP_IRQn
#define STM32_COMP1_HANDLER COMP1_2_3_IRQHandler
#define STM32_COMP2_HANDLER COMP1_2_3_IRQHandler
#elif defined(STM32L011xx) || defined(STM32L021xx) || defined(STM32L031xx) \
|| defined(STM32L041xx) || defined(STM32L051xx) || defined(STM32L052xx) || defined(STM32L053xx) \
|| defined(STM32L062xx) || defined(STM32L063xx) || defined(STM32L071xx) || defined(STM32L072xx) \
|| defined(STM32L073xx) || defined(STM32L081xx) || defined(STM32L082xx) || defined(STM32L083xx) \
|| defined(STM32F051x8) || defined(STM32F048xx) || defined(STM32F058xx) || defined(STM32F078xx) \
|| defined(STM32F072xb) || defined(STM32F071xb)
#define STM32_HAS_COMP1 TRUE
#define STM32_HAS_COMP2 TRUE
#define STM32_HAS_COMP3 FALSE
#define STM32_HAS_COMP4 FALSE
#define STM32_HAS_COMP5 FALSE
#define STM32_HAS_COMP6 FALSE
#define STM32_HAS_COMP7 FALSE
#define STM32_COMP1_IRQn ADC1_COMP_IRQn
#define STM32_COMP2_IRQn ADC1_COMP_IRQn
#define STM32_COMP1_HANDLER COMP1_2_3_IRQHandler
#define STM32_COMP2_HANDLER COMP1_2_3_IRQHandler
#else
#define STM32_HAS_COMP1 FALSE
#define STM32_HAS_COMP2 FALSE
@ -310,10 +367,6 @@
/* Derived constants and error checks. */
/*===========================================================================*/
#if STM32_COMP_USE_INTERRUPTS && defined(STM32F0XX)
#error "Interrupts are shared with EXTI on F0s (lines 21-22)"
#endif
#if STM32_COMP_USE_INTERRUPTS
#if !defined(STM32_DISABLE_EXTI21_22_29_HANDLER) || !defined(STM32_DISABLE_EXTI30_32_HANDLER) || !defined(STM32_DISABLE_EXTI33_HANDLER)
#error "COMP needs these defines in mcuconf to use interrupts: STM32_DISABLE_EXTI21_22_29_HANDLER STM32_DISABLE_EXTI30_32_HANDLER STM32_DISABLE_EXTI33_HANDLER"

1
os/hal/ports/STM32/STM32F0xx/platform.mk
Просмотреть файл

@ -14,6 +14,7 @@ endif
include ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1/driver.mk
include ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/driver.mk
include ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/COMPv1/driver.mk
# Shared variables
ALLCSRC += $(PLATFORMSRC_CONTRIB)

21
os/hal/ports/STM32/STM32L0xx/platform.mk Normal file
Просмотреть файл

@ -0,0 +1,21 @@
include ${CHIBIOS}/os/hal/ports/STM32/STM32L0xx/platform.mk
ifeq ($(USE_SMART_BUILD),yes)
# Configuration files directory
ifeq ($(CONFDIR),)
CONFDIR = .
endif
HALCONF := $(strip $(shell cat $(CONFDIR)/halconf.h $(CONFDIR)/halconf_community.h | egrep -e "\#define"))
else
endif
include ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/CRCv1/driver.mk
include ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/TIMv1/driver.mk
include ${CHIBIOS_CONTRIB}/os/hal/ports/STM32/LLD/COMPv1/driver.mk
# Shared variables
ALLCSRC += $(PLATFORMSRC_CONTRIB)
ALLINC += $(PLATFORMINC_CONTRIB)

215
testhal/STM32/STM32L0xx/COMP/Makefile Normal file
Просмотреть файл

@ -0,0 +1,215 @@
##############################################################################
# Build global options
# NOTE: Can be overridden externally.
#
# Compiler options here.
ifeq ($(USE_OPT),)
USE_OPT = -Os -ggdb -fomit-frame-pointer -falign-functions=16
endif
# C specific options here (added to USE_OPT).
ifeq ($(USE_COPT),)
USE_COPT =
endif
# C++ specific options here (added to USE_OPT).
ifeq ($(USE_CPPOPT),)
USE_CPPOPT = -fno-rtti
endif
# Enable this if you want the linker to remove unused code and data
ifeq ($(USE_LINK_GC),)
USE_LINK_GC = yes
endif
# Linker extra options here.
ifeq ($(USE_LDOPT),)
USE_LDOPT =
endif
# Enable this if you want link time optimizations (LTO)
ifeq ($(USE_LTO),)
USE_LTO = yes
endif
# If enabled, this option allows to compile the application in THUMB mode.
ifeq ($(USE_THUMB),)
USE_THUMB = yes
endif
# Enable this if you want to see the full log while compiling.
ifeq ($(USE_VERBOSE_COMPILE),)
USE_VERBOSE_COMPILE = no
endif
# If enabled, this option makes the build process faster by not compiling
# modules not used in the current configuration.
ifeq ($(USE_SMART_BUILD),)
USE_SMART_BUILD = yes
endif
#
# Build global options
##############################################################################
##############################################################################
# Architecture or project specific options
#
# Stack size to be allocated to the Cortex-M process stack. This stack is
# the stack used by the main() thread.
ifeq ($(USE_PROCESS_STACKSIZE),)
USE_PROCESS_STACKSIZE = 0x400
endif
# Stack size to the allocated to the Cortex-M main/exceptions stack. This
# stack is used for processing interrupts and exceptions.
ifeq ($(USE_EXCEPTIONS_STACKSIZE),)
USE_EXCEPTIONS_STACKSIZE = 0x400
endif
# Enables the use of FPU (no, softfp, hard).
ifeq ($(USE_FPU),)
USE_FPU = no
endif
#
# Architecture or project specific options
##############################################################################
##############################################################################
# Project, sources and paths
#
# Define project name here
PROJECT = ch
# Imported source files and paths
CHIBIOS = ../../../../../ChibiOS
CHIBIOS_CONTRIB = $(CHIBIOS)/../ChibiOS-Contrib
# Licensing files.
include $(CHIBIOS)/os/license/license.mk
# Startup files.
include $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk/startup_stm32l0xx.mk
# HAL-OSAL files (optional).
include $(CHIBIOS_CONTRIB)/os/hal/hal.mk
include $(CHIBIOS_CONTRIB)/os/hal/ports/STM32/STM32L0xx/platform.mk
include $(CHIBIOS)/os/hal/boards/ST_STM32L053_DISCOVERY/board.mk
include $(CHIBIOS)/os/hal/osal/rt/osal.mk
# RTOS files (optional).
include $(CHIBIOS)/os/rt/rt.mk
include $(CHIBIOS)/os/common/ports/ARMCMx/compilers/GCC/mk/port_v6m.mk
# Other files (optional).
#include $(CHIBIOS)/test/lib/test.mk
#include $(CHIBIOS)/test/rt/rt_test.mk
#include $(CHIBIOS)/test/oslib/oslib_test.mk
# Define linker script file here
LDSCRIPT= $(STARTUPLD)/STM32L053x8.ld
# C sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
CSRC = $(ALLCSRC) \
$(TESTSRC) \
main.c
# C++ sources that can be compiled in ARM or THUMB mode depending on the global
# setting.
CPPSRC = $(ALLCPPSRC)
# C sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
ACSRC =
# C++ sources to be compiled in ARM mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
ACPPSRC =
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
TCSRC =
# C sources to be compiled in THUMB mode regardless of the global setting.
# NOTE: Mixing ARM and THUMB mode enables the -mthumb-interwork compiler
# option that results in lower performance and larger code size.
TCPPSRC =
# List ASM source files here
ASMSRC = $(ALLASMSRC)
ASMXSRC = $(ALLXASMSRC)
INCDIR = $(ALLINC) $(TESTINC)
#
# Project, sources and paths
##############################################################################
##############################################################################
# Compiler settings
#
MCU = cortex-m4
#TRGT = arm-elf-
TRGT = arm-none-eabi-
CC = $(TRGT)gcc
CPPC = $(TRGT)g++
# Enable loading with g++ only if you need C++ runtime support.
# NOTE: You can use C++ even without C++ support if you are careful. C++
# runtime support makes code size explode.
LD = $(TRGT)gcc
#LD = $(TRGT)g++
CP = $(TRGT)objcopy
AS = $(TRGT)gcc -x assembler-with-cpp
AR = $(TRGT)ar
OD = $(TRGT)objdump
SZ = $(TRGT)size
HEX = $(CP) -O ihex
BIN = $(CP) -O binary
# ARM-specific options here
AOPT =
# THUMB-specific options here
TOPT = -mthumb -DTHUMB
# Define C warning options here
CWARN = -Wall -Wextra -Wundef -Wstrict-prototypes
# Define C++ warning options here
CPPWARN = -Wall -Wextra -Wundef
#
# Compiler settings
##############################################################################
##############################################################################
# Start of user section
#
# List all user C define here, like -D_DEBUG=1
UDEFS =
# Define ASM defines here
UADEFS =
# List all user directories here
UINCDIR =
# List the user directory to look for the libraries here
ULIBDIR =
# List all user libraries here
ULIBS =
#
# End of user defines
##############################################################################
RULESPATH = $(CHIBIOS)/os/common/startup/ARMCMx/compilers/GCC/mk
include $(RULESPATH)/rules.mk

714
testhal/STM32/STM32L0xx/COMP/chconf.h Normal file
Просмотреть файл

@ -0,0 +1,714 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file rt/templates/chconf.h
* @brief Configuration file template.
* @details A copy of this file must be placed in each project directory, it
* contains the application specific kernel settings.
*
* @addtogroup config
* @details Kernel related settings and hooks.
* @{
*/
#ifndef CHCONF_H
#define CHCONF_H
#define _CHIBIOS_RT_CONF_
#define _CHIBIOS_RT_CONF_VER_6_0_
/*===========================================================================*/
/**
* @name System timers settings
* @{
*/
/*===========================================================================*/
/**
* @brief System time counter resolution.
* @note Allowed values are 16 or 32 bits.
*/
#if !defined(CH_CFG_ST_RESOLUTION)
#define CH_CFG_ST_RESOLUTION 16
#endif
/**
* @brief System tick frequency.
* @details Frequency of the system timer that drives the system ticks. This
* setting also defines the system tick time unit.
*/
#if !defined(CH_CFG_ST_FREQUENCY)
#define CH_CFG_ST_FREQUENCY 1000
#endif
/**
* @brief Time intervals data size.
* @note Allowed values are 16, 32 or 64 bits.
*/
#if !defined(CH_CFG_INTERVALS_SIZE)
#define CH_CFG_INTERVALS_SIZE 32
#endif
/**
* @brief Time types data size.
* @note Allowed values are 16 or 32 bits.
*/
#if !defined(CH_CFG_TIME_TYPES_SIZE)
#define CH_CFG_TIME_TYPES_SIZE 32
#endif
/**
* @brief Time delta constant for the tick-less mode.
* @note If this value is zero then the system uses the classic
* periodic tick. This value represents the minimum number
* of ticks that is safe to specify in a timeout directive.
* The value one is not valid, timeouts are rounded up to
* this value.
*/
#if !defined(CH_CFG_ST_TIMEDELTA)
#define CH_CFG_ST_TIMEDELTA 2
#endif
/** @} */
/*===========================================================================*/
/**
* @name Kernel parameters and options
* @{
*/
/*===========================================================================*/
/**
* @brief Round robin interval.
* @details This constant is the number of system ticks allowed for the
* threads before preemption occurs. Setting this value to zero
* disables the preemption for threads with equal priority and the
* round robin becomes cooperative. Note that higher priority
* threads can still preempt, the kernel is always preemptive.
* @note Disabling the round robin preemption makes the kernel more compact
* and generally faster.
* @note The round robin preemption is not supported in tickless mode and
* must be set to zero in that case.
*/
#if !defined(CH_CFG_TIME_QUANTUM)
#define CH_CFG_TIME_QUANTUM 0
#endif
/**
* @brief Managed RAM size.
* @details Size of the RAM area to be managed by the OS. If set to zero
* then the whole available RAM is used. The core memory is made
* available to the heap allocator and/or can be used directly through
* the simplified core memory allocator.
*
* @note In order to let the OS manage the whole RAM the linker script must
* provide the @p __heap_base__ and @p __heap_end__ symbols.
* @note Requires @p CH_CFG_USE_MEMCORE.
*/
#if !defined(CH_CFG_MEMCORE_SIZE)
#define CH_CFG_MEMCORE_SIZE 0
#endif
/**
* @brief Idle thread automatic spawn suppression.
* @details When this option is activated the function @p chSysInit()
* does not spawn the idle thread. The application @p main()
* function becomes the idle thread and must implement an
* infinite loop.
*/
#if !defined(CH_CFG_NO_IDLE_THREAD)
#define CH_CFG_NO_IDLE_THREAD FALSE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Performance options
* @{
*/
/*===========================================================================*/
/**
* @brief OS optimization.
* @details If enabled then time efficient rather than space efficient code
* is used when two possible implementations exist.
*
* @note This is not related to the compiler optimization options.
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_OPTIMIZE_SPEED)
#define CH_CFG_OPTIMIZE_SPEED TRUE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Subsystem options
* @{
*/
/*===========================================================================*/
/**
* @brief Time Measurement APIs.
* @details If enabled then the time measurement APIs are included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_TM)
#define CH_CFG_USE_TM FALSE
#endif
/**
* @brief Threads registry APIs.
* @details If enabled then the registry APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_REGISTRY)
#define CH_CFG_USE_REGISTRY TRUE
#endif
/**
* @brief Threads synchronization APIs.
* @details If enabled then the @p chThdWait() function is included in
* the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_WAITEXIT)
#define CH_CFG_USE_WAITEXIT TRUE
#endif
/**
* @brief Semaphores APIs.
* @details If enabled then the Semaphores APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_SEMAPHORES)
#define CH_CFG_USE_SEMAPHORES TRUE
#endif
/**
* @brief Semaphores queuing mode.
* @details If enabled then the threads are enqueued on semaphores by
* priority rather than in FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)
#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
#endif
/**
* @brief Mutexes APIs.
* @details If enabled then the mutexes APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_MUTEXES)
#define CH_CFG_USE_MUTEXES TRUE
#endif
/**
* @brief Enables recursive behavior on mutexes.
* @note Recursive mutexes are heavier and have an increased
* memory footprint.
*
* @note The default is @p FALSE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)
#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
#endif
/**
* @brief Conditional Variables APIs.
* @details If enabled then the conditional variables APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MUTEXES.
*/
#if !defined(CH_CFG_USE_CONDVARS)
#define CH_CFG_USE_CONDVARS TRUE
#endif
/**
* @brief Conditional Variables APIs with timeout.
* @details If enabled then the conditional variables APIs with timeout
* specification are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_CONDVARS.
*/
#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)
#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE
#endif
/**
* @brief Events Flags APIs.
* @details If enabled then the event flags APIs are included in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_EVENTS)
#define CH_CFG_USE_EVENTS TRUE
#endif
/**
* @brief Events Flags APIs with timeout.
* @details If enabled then the events APIs with timeout specification
* are included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_EVENTS.
*/
#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)
#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
#endif
/**
* @brief Synchronous Messages APIs.
* @details If enabled then the synchronous messages APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_MESSAGES)
#define CH_CFG_USE_MESSAGES TRUE
#endif
/**
* @brief Synchronous Messages queuing mode.
* @details If enabled then messages are served by priority rather than in
* FIFO order.
*
* @note The default is @p FALSE. Enable this if you have special
* requirements.
* @note Requires @p CH_CFG_USE_MESSAGES.
*/
#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)
#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
#endif
/**
* @brief Mailboxes APIs.
* @details If enabled then the asynchronous messages (mailboxes) APIs are
* included in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_SEMAPHORES.
*/
#if !defined(CH_CFG_USE_MAILBOXES)
#define CH_CFG_USE_MAILBOXES TRUE
#endif
/**
* @brief Core Memory Manager APIs.
* @details If enabled then the core memory manager APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_MEMCORE)
#define CH_CFG_USE_MEMCORE TRUE
#endif
/**
* @brief Heap Allocator APIs.
* @details If enabled then the memory heap allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
* @p CH_CFG_USE_SEMAPHORES.
* @note Mutexes are recommended.
*/
#if !defined(CH_CFG_USE_HEAP)
#define CH_CFG_USE_HEAP TRUE
#endif
/**
* @brief Memory Pools Allocator APIs.
* @details If enabled then the memory pools allocator APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_MEMPOOLS)
#define CH_CFG_USE_MEMPOOLS TRUE
#endif
/**
* @brief Objects FIFOs APIs.
* @details If enabled then the objects FIFOs APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_OBJ_FIFOS)
#define CH_CFG_USE_OBJ_FIFOS TRUE
#endif
/**
* @brief Pipes APIs.
* @details If enabled then the pipes APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
*/
#if !defined(CH_CFG_USE_PIPES)
#define CH_CFG_USE_PIPES TRUE
#endif
/**
* @brief Dynamic Threads APIs.
* @details If enabled then the dynamic threads creation APIs are included
* in the kernel.
*
* @note The default is @p TRUE.
* @note Requires @p CH_CFG_USE_WAITEXIT.
* @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
*/
#if !defined(CH_CFG_USE_DYNAMIC)
#define CH_CFG_USE_DYNAMIC TRUE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Objects factory options
* @{
*/
/*===========================================================================*/
/**
* @brief Objects Factory APIs.
* @details If enabled then the objects factory APIs are included in the
* kernel.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_CFG_USE_FACTORY)
#define CH_CFG_USE_FACTORY TRUE
#endif
/**
* @brief Maximum length for object names.
* @details If the specified length is zero then the name is stored by
* pointer but this could have unintended side effects.
*/
#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)
#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8
#endif
/**
* @brief Enables the registry of generic objects.
*/
#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)
#define CH_CFG_FACTORY_OBJECTS_REGISTRY TRUE
#endif
/**
* @brief Enables factory for generic buffers.
*/
#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)
#define CH_CFG_FACTORY_GENERIC_BUFFERS TRUE
#endif
/**
* @brief Enables factory for semaphores.
*/
#if !defined(CH_CFG_FACTORY_SEMAPHORES)
#define CH_CFG_FACTORY_SEMAPHORES TRUE
#endif
/**
* @brief Enables factory for mailboxes.
*/
#if !defined(CH_CFG_FACTORY_MAILBOXES)
#define CH_CFG_FACTORY_MAILBOXES TRUE
#endif
/**
* @brief Enables factory for objects FIFOs.
*/
#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)
#define CH_CFG_FACTORY_OBJ_FIFOS TRUE
#endif
/**
* @brief Enables factory for Pipes.
*/
#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)
#define CH_CFG_FACTORY_PIPES TRUE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Debug options
* @{
*/
/*===========================================================================*/
/**
* @brief Debug option, kernel statistics.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_STATISTICS)
#define CH_DBG_STATISTICS FALSE
#endif
/**
* @brief Debug option, system state check.
* @details If enabled the correct call protocol for system APIs is checked
* at runtime.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_SYSTEM_STATE_CHECK)
#define CH_DBG_SYSTEM_STATE_CHECK TRUE
#endif
/**
* @brief Debug option, parameters checks.
* @details If enabled then the checks on the API functions input
* parameters are activated.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_CHECKS)
#define CH_DBG_ENABLE_CHECKS TRUE
#endif
/**
* @brief Debug option, consistency checks.
* @details If enabled then all the assertions in the kernel code are
* activated. This includes consistency checks inside the kernel,
* runtime anomalies and port-defined checks.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_ENABLE_ASSERTS)
#define CH_DBG_ENABLE_ASSERTS TRUE
#endif
/**
* @brief Debug option, trace buffer.
* @details If enabled then the trace buffer is activated.
*
* @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
*/
#if !defined(CH_DBG_TRACE_MASK)
#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_ALL
#endif
/**
* @brief Trace buffer entries.
* @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
* different from @p CH_DBG_TRACE_MASK_DISABLED.
*/
#if !defined(CH_DBG_TRACE_BUFFER_SIZE)
#define CH_DBG_TRACE_BUFFER_SIZE 128
#endif
/**
* @brief Debug option, stack checks.
* @details If enabled then a runtime stack check is performed.
*
* @note The default is @p FALSE.
* @note The stack check is performed in a architecture/port dependent way.
* It may not be implemented or some ports.
* @note The default failure mode is to halt the system with the global
* @p panic_msg variable set to @p NULL.
*/
#if !defined(CH_DBG_ENABLE_STACK_CHECK)
#define CH_DBG_ENABLE_STACK_CHECK TRUE
#endif
/**
* @brief Debug option, stacks initialization.
* @details If enabled then the threads working area is filled with a byte
* value when a thread is created. This can be useful for the
* runtime measurement of the used stack.
*
* @note The default is @p FALSE.
*/
#if !defined(CH_DBG_FILL_THREADS)
#define CH_DBG_FILL_THREADS TRUE
#endif
/**
* @brief Debug option, threads profiling.
* @details If enabled then a field is added to the @p thread_t structure that
* counts the system ticks occurred while executing the thread.
*
* @note The default is @p FALSE.
* @note This debug option is not currently compatible with the
* tickless mode.
*/
#if !defined(CH_DBG_THREADS_PROFILING)
#define CH_DBG_THREADS_PROFILING FALSE
#endif
/** @} */
/*===========================================================================*/
/**
* @name Kernel hooks
* @{
*/
/*===========================================================================*/
/**
* @brief System structure extension.
* @details User fields added to the end of the @p ch_system_t structure.
*/
#define CH_CFG_SYSTEM_EXTRA_FIELDS \
/* Add threads custom fields here.*/
/**
* @brief System initialization hook.
* @details User initialization code added to the @p chSysInit() function
* just before interrupts are enabled globally.
*/
#define CH_CFG_SYSTEM_INIT_HOOK() { \
/* Add threads initialization code here.*/ \
}
/**
* @brief Threads descriptor structure extension.
* @details User fields added to the end of the @p thread_t structure.
*/
#define CH_CFG_THREAD_EXTRA_FIELDS \
/* Add threads custom fields here.*/
/**
* @brief Threads initialization hook.
* @details User initialization code added to the @p _thread_init() function.
*
* @note It is invoked from within @p _thread_init() and implicitly from all
* the threads creation APIs.
*/
#define CH_CFG_THREAD_INIT_HOOK(tp) { \
/* Add threads initialization code here.*/ \
}
/**
* @brief Threads finalization hook.
* @details User finalization code added to the @p chThdExit() API.
*/
#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
/* Add threads finalization code here.*/ \
}
/**
* @brief Context switch hook.
* @details This hook is invoked just before switching between threads.
*/
#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
/* Context switch code here.*/ \
}
/**
* @brief ISR enter hook.
*/
#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
/* IRQ prologue code here.*/ \
}
/**
* @brief ISR exit hook.
*/
#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
/* IRQ epilogue code here.*/ \
}
/**
* @brief Idle thread enter hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to activate a power saving mode.
*/
#define CH_CFG_IDLE_ENTER_HOOK() { \
/* Idle-enter code here.*/ \
}
/**
* @brief Idle thread leave hook.
* @note This hook is invoked within a critical zone, no OS functions
* should be invoked from here.
* @note This macro can be used to deactivate a power saving mode.
*/
#define CH_CFG_IDLE_LEAVE_HOOK() { \
/* Idle-leave code here.*/ \
}
/**
* @brief Idle Loop hook.
* @details This hook is continuously invoked by the idle thread loop.
*/
#define CH_CFG_IDLE_LOOP_HOOK() { \
/* Idle loop code here.*/ \
}
/**
* @brief System tick event hook.
* @details This hook is invoked in the system tick handler immediately
* after processing the virtual timers queue.
*/
#define CH_CFG_SYSTEM_TICK_HOOK() { \
/* System tick event code here.*/ \
}
/**
* @brief System halt hook.
* @details This hook is invoked in case to a system halting error before
* the system is halted.
*/
#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
/* System halt code here.*/ \
}
/**
* @brief Trace hook.
* @details This hook is invoked each time a new record is written in the
* trace buffer.
*/
#define CH_CFG_TRACE_HOOK(tep) { \
/* Trace code here.*/ \
}
/** @} */
/*===========================================================================*/
/* Port-specific settings (override port settings defaulted in chcore.h). */
/*===========================================================================*/
#endif /* CHCONF_H */
/** @} */

527
testhal/STM32/STM32L0xx/COMP/halconf.h Normal file
Просмотреть файл

@ -0,0 +1,527 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/**
* @file templates/halconf.h
* @brief HAL configuration header.
* @details HAL configuration file, this file allows to enable or disable the
* various device drivers from your application. You may also use
* this file in order to override the device drivers default settings.
*
* @addtogroup HAL_CONF
* @{
*/
#ifndef HALCONF_H
#define HALCONF_H
#define _CHIBIOS_HAL_CONF_
#define _CHIBIOS_HAL_CONF_VER_7_0_
#include "mcuconf.h"
/**
* @brief Enables the PAL subsystem.
*/
#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
#define HAL_USE_PAL TRUE
#endif
/**
* @brief Enables the ADC subsystem.
*/
#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
#define HAL_USE_ADC FALSE
#endif
/**
* @brief Enables the CAN subsystem.
*/
#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
#define HAL_USE_CAN FALSE
#endif
/**
* @brief Enables the cryptographic subsystem.
*/
#if !defined(HAL_USE_CRY) || defined(__DOXYGEN__)
#define HAL_USE_CRY FALSE
#endif
/**
* @brief Enables the DAC subsystem.
*/
#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
#define HAL_USE_DAC FALSE
#endif
/**
* @brief Enables the GPT subsystem.
*/
#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
#define HAL_USE_GPT TRUE
#endif
/**
* @brief Enables the I2C subsystem.
*/
#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
#define HAL_USE_I2C FALSE
#endif
/**
* @brief Enables the I2S subsystem.
*/
#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
#define HAL_USE_I2S FALSE
#endif
/**
* @brief Enables the ICU subsystem.
*/
#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
#define HAL_USE_ICU FALSE
#endif
/**
* @brief Enables the MAC subsystem.
*/
#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
#define HAL_USE_MAC FALSE
#endif
/**
* @brief Enables the MMC_SPI subsystem.
*/
#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
#define HAL_USE_MMC_SPI FALSE
#endif
/**
* @brief Enables the PWM subsystem.
*/
#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
#define HAL_USE_PWM FALSE
#endif
/**
* @brief Enables the RTC subsystem.
*/
#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
#define HAL_USE_RTC FALSE
#endif
/**
* @brief Enables the SDC subsystem.
*/
#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
#define HAL_USE_SDC FALSE
#endif
/**
* @brief Enables the SERIAL subsystem.
*/
#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL FALSE
#endif
/**
* @brief Enables the SERIAL over USB subsystem.
*/
#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
#define HAL_USE_SERIAL_USB FALSE
#endif
/**
* @brief Enables the SIO subsystem.
*/
#if !defined(HAL_USE_SIO) || defined(__DOXYGEN__)
#define HAL_USE_SIO FALSE
#endif
/**
* @brief Enables the SPI subsystem.
*/
#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
#define HAL_USE_SPI FALSE
#endif
/**
* @brief Enables the TRNG subsystem.
*/
#if !defined(HAL_USE_TRNG) || defined(__DOXYGEN__)
#define HAL_USE_TRNG FALSE
#endif
/**
* @brief Enables the UART subsystem.
*/
#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
#define HAL_USE_UART FALSE
#endif
/**
* @brief Enables the USB subsystem.
*/
#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
#define HAL_USE_USB FALSE
#endif
/**
* @brief Enables the WDG subsystem.
*/
#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
#define HAL_USE_WDG FALSE
#endif
/**
* @brief Enables the WSPI subsystem.
*/
#if !defined(HAL_USE_WSPI) || defined(__DOXYGEN__)
#define HAL_USE_WSPI FALSE
#endif
/*===========================================================================*/
/* PAL driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(PAL_USE_CALLBACKS) || defined(__DOXYGEN__)
#define PAL_USE_CALLBACKS FALSE
#endif
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(PAL_USE_WAIT) || defined(__DOXYGEN__)
#define PAL_USE_WAIT FALSE
#endif
/*===========================================================================*/
/* ADC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
#define ADC_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define ADC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* CAN driver related settings. */
/*===========================================================================*/
/**
* @brief Sleep mode related APIs inclusion switch.
*/
#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
#define CAN_USE_SLEEP_MODE TRUE
#endif
/**
* @brief Enforces the driver to use direct callbacks rather than OSAL events.
*/
#if !defined(CAN_ENFORCE_USE_CALLBACKS) || defined(__DOXYGEN__)
#define CAN_ENFORCE_USE_CALLBACKS FALSE
#endif
/*===========================================================================*/
/* CRY driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the SW fall-back of the cryptographic driver.
* @details When enabled, this option, activates a fall-back software
* implementation for algorithms not supported by the underlying
* hardware.
* @note Fall-back implementations may not be present for all algorithms.
*/
#if !defined(HAL_CRY_USE_FALLBACK) || defined(__DOXYGEN__)
#define HAL_CRY_USE_FALLBACK FALSE
#endif
/**
* @brief Makes the driver forcibly use the fall-back implementations.
*/
#if !defined(HAL_CRY_ENFORCE_FALLBACK) || defined(__DOXYGEN__)
#define HAL_CRY_ENFORCE_FALLBACK FALSE
#endif
/*===========================================================================*/
/* DAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(DAC_USE_WAIT) || defined(__DOXYGEN__)
#define DAC_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p dacAcquireBus() and @p dacReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(DAC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define DAC_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* I2C driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the mutual exclusion APIs on the I2C bus.
*/
#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define I2C_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* MAC driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the zero-copy API.
*/
#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
#define MAC_USE_ZERO_COPY FALSE
#endif
/**
* @brief Enables an event sources for incoming packets.
*/
#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
#define MAC_USE_EVENTS TRUE
#endif
/*===========================================================================*/
/* MMC_SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
* This option is recommended also if the SPI driver does not
* use a DMA channel and heavily loads the CPU.
*/
#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
#define MMC_NICE_WAITING TRUE
#endif
/*===========================================================================*/
/* SDC driver related settings. */
/*===========================================================================*/
/**
* @brief Number of initialization attempts before rejecting the card.
* @note Attempts are performed at 10mS intervals.
*/
#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
#define SDC_INIT_RETRY 100
#endif
/**
* @brief Include support for MMC cards.
* @note MMC support is not yet implemented so this option must be kept
* at @p FALSE.
*/
#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
#define SDC_MMC_SUPPORT FALSE
#endif
/**
* @brief Delays insertions.
* @details If enabled this options inserts delays into the MMC waiting
* routines releasing some extra CPU time for the threads with
* lower priority, this may slow down the driver a bit however.
*/
#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
#define SDC_NICE_WAITING TRUE
#endif
/**
* @brief OCR initialization constant for V20 cards.
*/
#if !defined(SDC_INIT_OCR_V20) || defined(__DOXYGEN__)
#define SDC_INIT_OCR_V20 0x50FF8000U
#endif
/**
* @brief OCR initialization constant for non-V20 cards.
*/
#if !defined(SDC_INIT_OCR) || defined(__DOXYGEN__)
#define SDC_INIT_OCR 0x80100000U
#endif
/*===========================================================================*/
/* SERIAL driver related settings. */
/*===========================================================================*/
/**
* @brief Default bit rate.
* @details Configuration parameter, this is the baud rate selected for the
* default configuration.
*/
#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
#define SERIAL_DEFAULT_BITRATE 38400
#endif
/**
* @brief Serial buffers size.
* @details Configuration parameter, you can change the depth of the queue
* buffers depending on the requirements of your application.
* @note The default is 16 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_BUFFERS_SIZE 16
#endif
/*===========================================================================*/
/* SERIAL_USB driver related setting. */
/*===========================================================================*/
/**
* @brief Serial over USB buffers size.
* @details Configuration parameter, the buffer size must be a multiple of
* the USB data endpoint maximum packet size.
* @note The default is 256 bytes for both the transmission and receive
* buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
#define SERIAL_USB_BUFFERS_SIZE 256
#endif
/**
* @brief Serial over USB number of buffers.
* @note The default is 2 buffers.
*/
#if !defined(SERIAL_USB_BUFFERS_NUMBER) || defined(__DOXYGEN__)
#define SERIAL_USB_BUFFERS_NUMBER 2
#endif
/*===========================================================================*/
/* SPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
#define SPI_USE_WAIT TRUE
#endif
/**
* @brief Enables circular transfers APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)
#define SPI_USE_CIRCULAR FALSE
#endif
/**
* @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define SPI_USE_MUTUAL_EXCLUSION TRUE
#endif
/**
* @brief Handling method for SPI CS line.
* @note Disabling this option saves both code and data space.
*/
#if !defined(SPI_SELECT_MODE) || defined(__DOXYGEN__)
#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD
#endif
/*===========================================================================*/
/* UART driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(UART_USE_WAIT) || defined(__DOXYGEN__)
#define UART_USE_WAIT FALSE
#endif
/**
* @brief Enables the @p uartAcquireBus() and @p uartReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(UART_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define UART_USE_MUTUAL_EXCLUSION FALSE
#endif
/*===========================================================================*/
/* USB driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
#define USB_USE_WAIT FALSE
#endif
/*===========================================================================*/
/* WSPI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables synchronous APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(WSPI_USE_WAIT) || defined(__DOXYGEN__)
#define WSPI_USE_WAIT TRUE
#endif
/**
* @brief Enables the @p wspiAcquireBus() and @p wspiReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(WSPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define WSPI_USE_MUTUAL_EXCLUSION TRUE
#endif
#include "halconf_community.h"
#endif /* HALCONF_H */
/** @} */

173
testhal/STM32/STM32L0xx/COMP/halconf_community.h Normal file
Просмотреть файл

@ -0,0 +1,173 @@
/*
ChibiOS - Copyright (C) 2014 Uladzimir Pylinsky aka barthess
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef HALCONF_COMMUNITY_H
#define HALCONF_COMMUNITY_H
/**
* @brief Enables the community overlay.
*/
#if !defined(HAL_USE_COMMUNITY) || defined(__DOXYGEN__)
#define HAL_USE_COMMUNITY TRUE
#endif
/**
* @brief Enables the FSMC subsystem.
*/
#if !defined(HAL_USE_FSMC) || defined(__DOXYGEN__)
#define HAL_USE_FSMC FALSE
#endif
/**
* @brief Enables the NAND subsystem.
*/
#if !defined(HAL_USE_NAND) || defined(__DOXYGEN__)
#define HAL_USE_NAND FALSE
#endif
/**
* @brief Enables the 1-wire subsystem.
*/
#if !defined(HAL_USE_ONEWIRE) || defined(__DOXYGEN__)
#define HAL_USE_ONEWIRE FALSE
#endif
/**
* @brief Enables the EICU subsystem.
*/
#if !defined(HAL_USE_EICU) || defined(__DOXYGEN__)
#define HAL_USE_EICU FALSE
#endif
/**
* @brief Enables the CRC subsystem.
*/
#if !defined(HAL_USE_CRC) || defined(__DOXYGEN__)
#define HAL_USE_CRC FALSE
#endif
/**
* @brief Enables the RNG subsystem.
*/
#if !defined(HAL_USE_RNG) || defined(__DOXYGEN__)
#define HAL_USE_RNG FALSE
#endif
/**
* @brief Enables the EEPROM subsystem.
*/
#if !defined(HAL_USE_EEPROM) || defined(__DOXYGEN__)
#define HAL_USE_EEPROM FALSE
#endif
/**
* @brief Enables the TIMCAP subsystem.
*/
#if !defined(HAL_USE_TIMCAP) || defined(__DOXYGEN__)
#define HAL_USE_TIMCAP FALSE
#endif
/**
* @brief Enables the TIMCAP subsystem.
*/
#if !defined(HAL_USE_COMP) || defined(__DOXYGEN__)
#define HAL_USE_COMP TRUE
#endif
/**
* @brief Enables the QEI subsystem.
*/
#if !defined(HAL_USE_QEI) || defined(__DOXYGEN__)
#define HAL_USE_QEI FALSE
#endif
/**
* @brief Enables the USBH subsystem.
*/
#if !defined(HAL_USE_USBH) || defined(__DOXYGEN__)
#define HAL_USE_USBH FALSE
#endif
/**
* @brief Enables the USB_MSD subsystem.
*/
#if !defined(HAL_USE_USB_MSD) || defined(__DOXYGEN__)
#define HAL_USE_USB_MSD FALSE
#endif
/*===========================================================================*/
/* FSMCNAND driver related settings. */
/*===========================================================================*/
/**
* @brief Enables the @p nandAcquireBus() and @p nanReleaseBus() APIs.
* @note Disabling this option saves both code and data space.
*/
#if !defined(NAND_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
#define NAND_USE_MUTUAL_EXCLUSION TRUE
#endif
/*===========================================================================*/
/* 1-wire driver related settings. */
/*===========================================================================*/
/**
* @brief Enables strong pull up feature.
* @note Disabling this option saves both code and data space.
*/
#define ONEWIRE_USE_STRONG_PULLUP FALSE
/**
* @brief Enables search ROM feature.
* @note Disabling this option saves both code and data space.
*/
#define ONEWIRE_USE_SEARCH_ROM TRUE
/*===========================================================================*/
/* QEI driver related settings. */
/*===========================================================================*/
/**
* @brief Enables discard of overlow
*/
#if !defined(QEI_USE_OVERFLOW_DISCARD) || defined(__DOXYGEN__)
#define QEI_USE_OVERFLOW_DISCARD FALSE
#endif
/**
* @brief Enables min max of overlow
*/
#if !defined(QEI_USE_OVERFLOW_MINMAX) || defined(__DOXYGEN__)
#define QEI_USE_OVERFLOW_MINMAX FALSE
#endif
/*===========================================================================*/
/* EEProm driver related settings. */
/*===========================================================================*/
/**
* @brief Enables 24xx series I2C eeprom device driver.
* @note Disabling this option saves both code and data space.
*/
#define EEPROM_USE_EE24XX FALSE
/**
* @brief Enables 25xx series SPI eeprom device driver.
* @note Disabling this option saves both code and data space.
*/
#define EEPROM_USE_EE25XX FALSE
#endif /* HALCONF_COMMUNITY_H */
/** @} */

73
testhal/STM32/STM32L0xx/COMP/main.c Normal file
Просмотреть файл

@ -0,0 +1,73 @@
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#include "ch.h"
#include "hal.h"
void comp2_cb(COMPDriver *comp) {
/* Check if output is high (rising) */
if (comp->reg->CSR & COMP_CSR_COMPxOUTVALUE) {
palToggleLine(LINE_LED_RED);
}
}
static const COMPConfig comp2_conf = {
COMP_OUTPUT_NORMAL,
COMP_IRQ_RISING,
comp2_cb,
STM32_COMP_InvertingInput_VREFINT // CSR
};
/*
* Application entry point.
*/
int main(void) {
halInit();
chSysInit();
/*
* Set PA3 to Analog (COMP2_INP)
* Callback will trigger when voltage rises above VREFINT
*/
palSetPadMode(GPIOA, 3, PAL_MODE_INPUT_ANALOG);
/*
* Set PA2 to alternate 8 (COMP2_OUT)
* You can connect this to an oscilloscope along with PA4 to compare input/output.
*/
palSetPadMode(GPIOA, 2, PAL_MODE_ALTERNATE(8));
/*
* Start peripherals
*/
compStart(&COMPD2, &comp2_conf);
compEnable(&COMPD2);
/*
* Normal main() thread activity.
*/
while (true) {
chThdSleepMilliseconds(500);
palToggleLine(LINE_LED_GREEN);
}
return 0;
}

216
testhal/STM32/STM32L0xx/COMP/mcuconf.h Normal file
Просмотреть файл

@ -0,0 +1,216 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef MCUCONF_H
#define MCUCONF_H
/*
* STM32L0xx drivers configuration.
* The following settings override the default settings present in
* the various device driver implementation headers.
* Note that the settings for each driver only have effect if the whole
* driver is enabled in halconf.h.
*
* IRQ priorities:
* 3...0 Lowest...Highest.
*
* DMA priorities:
* 0...3 Lowest...Highest.
*/
#define STM32L0xx_MCUCONF
/*
* HAL driver system settings.
*/
#define STM32_NO_INIT FALSE
#define STM32_VOS STM32_VOS_1P8
#define STM32_PVD_ENABLE FALSE
#define STM32_PLS STM32_PLS_LEV0
#define STM32_HSI16_ENABLED TRUE
#define STM32_HSI16_DIVIDER_ENABLED FALSE
#define STM32_LSI_ENABLED TRUE
#define STM32_HSE_ENABLED FALSE
#define STM32_LSE_ENABLED FALSE
#define STM32_ADC_CLOCK_ENABLED TRUE
#define STM32_USB_CLOCK_ENABLED TRUE
#define STM32_MSIRANGE STM32_MSIRANGE_2M
#define STM32_SW STM32_SW_PLL
#define STM32_PLLSRC STM32_PLLSRC_HSI16
#define STM32_PLLMUL_VALUE 4
#define STM32_PLLDIV_VALUE 2
#define STM32_HPRE STM32_HPRE_DIV1
#define STM32_PPRE1 STM32_PPRE1_DIV1
#define STM32_PPRE2 STM32_PPRE2_DIV1
#define STM32_MCOSEL STM32_MCOSEL_NOCLOCK
#define STM32_MCOPRE STM32_MCOPRE_DIV1
#define STM32_RTCSEL STM32_RTCSEL_LSI
#define STM32_RTCPRE STM32_RTCPRE_DIV2
#define STM32_USART1SEL STM32_USART1SEL_APB
#define STM32_USART2SEL STM32_USART2SEL_APB
#define STM32_LPUART1SEL STM32_LPUART1SEL_APB
#define STM32_I2C1SEL STM32_I2C1SEL_APB
#define STM32_I2C3SEL STM32_I2C3SEL_APB
#define STM32_LPTIM1SEL STM32_LPTIM1SEL_APB
#define STM32_HSI48SEL STM32_HSI48SEL_HSI48
/*
* IRQ system settings.
*/
#define STM32_IRQ_EXTI0_1_PRIORITY 3
#define STM32_IRQ_EXTI2_3_PRIORITY 3
#define STM32_IRQ_EXTI4_15_PRIORITY 3
#define STM32_IRQ_EXTI16_PRIORITY 3
#define STM32_IRQ_EXTI17_20_PRIORITY 3
#define STM32_IRQ_EXTI21_22_PRIORITY 3
/*
* ADC driver system settings.
* Note, IRQ is shared with EXT channels 21 and 22.
*/
#define STM32_ADC_USE_ADC1 FALSE
#define STM32_ADC_ADC1_CKMODE STM32_ADC_CKMODE_ADCCLK
#define STM32_ADC_ADC1_DMA_PRIORITY 2
#define STM32_ADC_ADC1_DMA_IRQ_PRIORITY 2
#define STM32_ADC_ADC1_DMA_STREAM STM32_DMA_STREAM_ID(1, 1)
#define STM32_ADC_PRESCALER_VALUE 1
/*
* GPT driver system settings.
*/
#define STM32_GPT_USE_TIM2 FALSE
#define STM32_GPT_TIM2_IRQ_PRIORITY 2
#define STM32_GPT_USE_TIM6 TRUE
#define STM32_GPT_TIM6_IRQ_PRIORITY 2
#define STM32_GPT_USE_TIM21 FALSE
#define STM32_GPT_TIM21_IRQ_PRIORITY 2
#define STM32_GPT_USE_TIM22 FALSE
#define STM32_GPT_TIM22_IRQ_PRIORITY 2
/*
* I2C driver system settings.
*/
#define STM32_I2C_USE_I2C1 FALSE
#define STM32_I2C_USE_I2C2 FALSE
#define STM32_I2C_USE_I2C3 FALSE
#define STM32_I2C_BUSY_TIMEOUT 50
#define STM32_I2C_I2C1_IRQ_PRIORITY 3
#define STM32_I2C_I2C2_IRQ_PRIORITY 3
#define STM32_I2C_I2C3_IRQ_PRIORITY 3
#define STM32_I2C_USE_DMA TRUE
#define STM32_I2C_I2C1_DMA_PRIORITY 1
#define STM32_I2C_I2C2_DMA_PRIORITY 1
#define STM32_I2C_I2C3_DMA_PRIORITY 1
#define STM32_I2C_I2C1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_I2C_I2C1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
#define STM32_I2C_I2C2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
#define STM32_I2C_I2C2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
#define STM32_I2C_I2C3_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
#define STM32_I2C_I2C3_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_I2C_DMA_ERROR_HOOK(i2cp) osalSysHalt("DMA failure")
/*
* ICU driver system settings.
*/
#define STM32_ICU_USE_TIM2 FALSE
#define STM32_ICU_TIM2_IRQ_PRIORITY 3
#define STM32_ICU_USE_TIM3 FALSE
#define STM32_ICU_TIM3_IRQ_PRIORITY 3
#define STM32_ICU_USE_TIM21 FALSE
#define STM32_ICU_TIM21_IRQ_PRIORITY 3
#define STM32_ICU_USE_TIM22 FALSE
#define STM32_ICU_TIM22_IRQ_PRIORITY 3
/*
* PWM driver system settings.
*/
#define STM32_PWM_USE_ADVANCED FALSE
#define STM32_PWM_USE_TIM2 FALSE
#define STM32_PWM_TIM2_IRQ_PRIORITY 3
#define STM32_PWM_USE_TIM3 FALSE
#define STM32_PWM_TIM3_IRQ_PRIORITY 3
#define STM32_PWM_USE_TIM21 FALSE
#define STM32_PWM_TIM21_IRQ_PRIORITY 3
#define STM32_PWM_USE_TIM22 FALSE
#define STM32_PWM_TIM22_IRQ_PRIORITY 3
/*
* SERIAL driver system settings.
*/
#define STM32_SERIAL_USE_USART1 FALSE
#define STM32_SERIAL_USE_USART2 TRUE
#define STM32_SERIAL_USE_UART4 FALSE
#define STM32_SERIAL_USE_UART5 FALSE
#define STM32_SERIAL_USE_LPUART1 FALSE
#define STM32_SERIAL_USART1_PRIORITY 3
#define STM32_SERIAL_USART2_PRIORITY 3
#define STM32_SERIAL_USART3_8_PRIORITY 3
#define STM32_SERIAL_LPUART1_PRIORITY 3
/*
* SPI driver system settings.
*/
#define STM32_SPI_USE_SPI1 FALSE
#define STM32_SPI_USE_SPI2 FALSE
#define STM32_SPI_SPI1_DMA_PRIORITY 1
#define STM32_SPI_SPI2_DMA_PRIORITY 1
#define STM32_SPI_SPI1_IRQ_PRIORITY 1
#define STM32_SPI_SPI2_IRQ_PRIORITY 1
#define STM32_SPI_SPI1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
#define STM32_SPI_SPI1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
#define STM32_SPI_SPI2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
#define STM32_SPI_SPI2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
#define STM32_SPI_DMA_ERROR_HOOK(spip) osalSysHalt("DMA failure")
/*
* ST driver system settings.
*/
#define STM32_ST_IRQ_PRIORITY 2
#define STM32_ST_USE_TIMER 21
/*
* UART driver system settings.
*/
#define STM32_UART_USE_USART1 FALSE
#define STM32_UART_USE_USART2 FALSE
#define STM32_UART_USE_UART4 FALSE
#define STM32_UART_USART1_IRQ_PRIORITY 3
#define STM32_UART_USART2_IRQ_PRIORITY 3
#define STM32_UART_USART3_8_IRQ_PRIORITY 3
#define STM32_UART_USART1_DMA_PRIORITY 0
#define STM32_UART_USART2_DMA_PRIORITY 0
#define STM32_UART_USART1_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 5)
#define STM32_UART_USART1_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 4)
#define STM32_UART_USART2_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 6)
#define STM32_UART_USART2_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 7)
#define STM32_UART_UART4_RX_DMA_STREAM STM32_DMA_STREAM_ID(1, 2)
#define STM32_UART_UART4_TX_DMA_STREAM STM32_DMA_STREAM_ID(1, 3)
#define STM32_UART_DMA_ERROR_HOOK(uartp) osalSysHalt("DMA failure")
/*
* USB driver system settings.
*/
#define STM32_USB_USE_USB1 FALSE
#define STM32_USB_LOW_POWER_ON_SUSPEND FALSE
#define STM32_USB_USB1_LP_IRQ_PRIORITY 3
/*
* WDG driver system settings.
*/
#define STM32_WDG_USE_IWDG FALSE
#include "mcuconf_community.h"
#endif /* MCUCONF_H */

155
testhal/STM32/STM32L0xx/COMP/mcuconf_community.h Normal file
Просмотреть файл

@ -0,0 +1,155 @@
/*
ChibiOS/RT - Copyright (C) 2014 Uladzimir Pylinsky aka barthess
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* FSMC driver system settings.
*/
#define STM32_FSMC_USE_FSMC1 FALSE
#define STM32_FSMC_FSMC1_IRQ_PRIORITY 10
/*
* FSMC NAND driver system settings.
*/
#define STM32_NAND_USE_FSMC_NAND1 FALSE
#define STM32_NAND_USE_FSMC_NAND2 FALSE
#define STM32_NAND_USE_EXT_INT FALSE
#define STM32_NAND_DMA_STREAM STM32_DMA_STREAM_ID(2, 7)
#define STM32_NAND_DMA_PRIORITY 0
#define STM32_NAND_DMA_ERROR_HOOK(nandp) osalSysHalt("DMA failure")
/*
* FSMC SRAM driver system settings.
*/
#define STM32_USE_FSMC_SRAM FALSE
#define STM32_SRAM_USE_FSMC_SRAM1 FALSE
#define STM32_SRAM_USE_FSMC_SRAM2 FALSE
#define STM32_SRAM_USE_FSMC_SRAM3 FALSE
#define STM32_SRAM_USE_FSMC_SRAM4 FALSE
/*
* FSMC SDRAM driver system settings.
*/
#define STM32_USE_FSMC_SDRAM FALSE
#define STM32_SDRAM_USE_FSMC_SDRAM1 FALSE
#define STM32_SDRAM_USE_FSMC_SDRAM2 TRUE
/*
* TIMCAP driver system settings.
*/
#define STM32_TIMCAP_USE_TIM1 TRUE
#define STM32_TIMCAP_USE_TIM2 FALSE
#define STM32_TIMCAP_USE_TIM3 TRUE
#define STM32_TIMCAP_USE_TIM4 TRUE
#define STM32_TIMCAP_USE_TIM5 TRUE
#define STM32_TIMCAP_USE_TIM8 TRUE
#define STM32_TIMCAP_USE_TIM9 TRUE
#define STM32_TIMCAP_TIM1_IRQ_PRIORITY 3
#define STM32_TIMCAP_TIM2_IRQ_PRIORITY 3
#define STM32_TIMCAP_TIM3_IRQ_PRIORITY 3
#define STM32_TIMCAP_TIM4_IRQ_PRIORITY 3
#define STM32_TIMCAP_TIM5_IRQ_PRIORITY 3
#define STM32_TIMCAP_TIM8_IRQ_PRIORITY 3
#define STM32_TIMCAP_TIM9_IRQ_PRIORITY 3
/*
* COMP driver system settings.
*/
#define STM32_COMP_USE_COMP1 TRUE
#define STM32_COMP_USE_COMP2 TRUE
#define STM32_COMP_USE_COMP3 FALSE
#define STM32_COMP_USE_COMP4 FALSE
#define STM32_COMP_USE_COMP5 FALSE
#define STM32_COMP_USE_COMP6 FALSE
#define STM32_COMP_USE_COMP7 FALSE
#define STM32_COMP_USE_INTERRUPTS TRUE
#define STM32_COMP_1_2_3_IRQ_PRIORITY 5
#if STM32_COMP_USE_INTERRUPTS
#define STM32_DISABLE_EXTI21_22_29_HANDLER
#define STM32_DISABLE_EXTI30_32_HANDLER
#define STM32_DISABLE_EXTI33_HANDLER
#endif
/*
* USBH driver system settings.
*/
#define STM32_OTG1_CHANNELS_NUMBER 8
#define STM32_OTG2_CHANNELS_NUMBER 12
#define STM32_USBH_USE_OTG1 1
#define STM32_OTG1_RXFIFO_SIZE 1024
#define STM32_OTG1_PTXFIFO_SIZE 128
#define STM32_OTG1_NPTXFIFO_SIZE 128
#define STM32_USBH_USE_OTG2 0
#define STM32_OTG2_RXFIFO_SIZE 2048
#define STM32_OTG2_PTXFIFO_SIZE 1024
#define STM32_OTG2_NPTXFIFO_SIZE 1024
#define STM32_USBH_MIN_QSPACE 4
#define STM32_USBH_CHANNELS_NP 4
/*
* CRC driver system settings.
*/
#define STM32_CRC_USE_CRC1 TRUE
#define STM32_CRC_CRC1_DMA_IRQ_PRIORITY 1
#define STM32_CRC_CRC1_DMA_PRIORITY 2
#define STM32_CRC_CRC1_DMA_STREAM STM32_DMA1_STREAM2
#define CRCSW_USE_CRC1 FALSE
#define CRCSW_CRC32_TABLE TRUE
#define CRCSW_CRC16_TABLE TRUE
#define CRCSW_PROGRAMMABLE TRUE
/*
* EICU driver system settings.
*/
#define STM32_EICU_USE_TIM1 TRUE
#define STM32_EICU_USE_TIM2 FALSE
#define STM32_EICU_USE_TIM3 TRUE
#define STM32_EICU_USE_TIM4 TRUE
#define STM32_EICU_USE_TIM5 TRUE
#define STM32_EICU_USE_TIM8 TRUE
#define STM32_EICU_USE_TIM9 TRUE
#define STM32_EICU_USE_TIM10 TRUE
#define STM32_EICU_USE_TIM11 TRUE
#define STM32_EICU_USE_TIM12 TRUE
#define STM32_EICU_USE_TIM13 TRUE
#define STM32_EICU_USE_TIM14 TRUE
#define STM32_EICU_TIM1_IRQ_PRIORITY 7
#define STM32_EICU_TIM2_IRQ_PRIORITY 7
#define STM32_EICU_TIM3_IRQ_PRIORITY 7
#define STM32_EICU_TIM4_IRQ_PRIORITY 7
#define STM32_EICU_TIM5_IRQ_PRIORITY 7
#define STM32_EICU_TIM8_IRQ_PRIORITY 7
#define STM32_EICU_TIM9_IRQ_PRIORITY 7
#define STM32_EICU_TIM10_IRQ_PRIORITY 7
#define STM32_EICU_TIM11_IRQ_PRIORITY 7
#define STM32_EICU_TIM12_IRQ_PRIORITY 7
#define STM32_EICU_TIM13_IRQ_PRIORITY 7
#define STM32_EICU_TIM14_IRQ_PRIORITY 7
/*
* QEI driver system settings.
*/
#define STM32_QEI_USE_TIM1 TRUE
#define STM32_QEI_USE_TIM2 FALSE
#define STM32_QEI_USE_TIM3 TRUE
#define STM32_QEI_TIM1_IRQ_PRIORITY 3
#define STM32_QEI_TIM2_IRQ_PRIORITY 3
#define STM32_QEI_TIM3_IRQ_PRIORITY 3