Remove bitrotted support for a separate mono submodule for watchOS support. (#5022)
Unce upon a time we used a separate mono submodule for watchOS support, to make development of watchOS support easier (we referenced mono/master, to avoid backporting fixes for watchOS support through various release branches in mono). This only worked until our watchOS support became stable, since then we had to start using a stable version of mono for watchOS support. This means that our build support for using a separate mono clone for watchOS support is no longer needed; and in any case it's broken because of build changes done later.
This commit is contained in:
Родитель
f87f3b88f8
Коммит
d899d4fb70
|
@ -230,7 +230,6 @@ DEVICETV_OBJC_CFLAGS = $(DEVICETV_CFLAGS) $(DEVICE_OBJC_CFLAGS)
|
|||
# paths to the modules we depend on, as variables, so people can put
|
||||
# things in other places if they absolutely must.
|
||||
MONO_PATH=$(TOP)/external/mono
|
||||
WATCH_MONO_PATH=$(TOP)/external/mono
|
||||
TOUCH_UNIT_PATH=$(TOP)/external/Touch.Unit
|
||||
NUNITLITE_PATH=$(TOP)/external/mono/external/nunit-lite
|
||||
OPENTK_PATH=$(TOP)/external/opentk
|
||||
|
|
|
@ -390,11 +390,6 @@ endif
|
|||
$(MONO_PATH)/configure: $(MONO_PATH)/configure.ac $(BUILDS_MAKEFILE_DEP)
|
||||
$(Q) ./wrap-autogen.sh $(MONO_PATH) mono $(XAMARIN_AUTOGEN_FLAGS)
|
||||
|
||||
ifneq ($(WATCH_MONO_PATH),$(MONO_PATH))
|
||||
$(WATCH_MONO_PATH)/configure: $(WATCH_MONO_PATH)/configure.ac $(BUILDS_MAKEFILE_DEP)
|
||||
$(Q) ./wrap-autogen.sh $(WATCH_MONO_PATH) mono
|
||||
endif
|
||||
|
||||
configure-mono:
|
||||
rm -f $(MONO_PATH)/configure
|
||||
$(MAKE) $(MONO_PATH)/configure
|
||||
|
@ -422,6 +417,7 @@ TOOLS64_LDFLAGS=-arch x86_64 -mmacosx-version-min=$(MIN_OSX_SDK_VERSION) $(COMMO
|
|||
|
||||
TOOLS64_CONFIGURE_FLAGS= --build=x86_64-apple-darwin10 \
|
||||
--with-monotouch_tv=yes \
|
||||
--with-monotouch_watch=yes \
|
||||
--prefix=$(BUILD_DESTDIR)/tools64 \
|
||||
--enable-maintainer-mode \
|
||||
--cache-file=../tools64.config.cache \
|
||||
|
@ -436,12 +432,6 @@ TOOLS64_CONFIGURE_FLAGS= --build=x86_64-apple-darwin10 \
|
|||
--disable-boehm \
|
||||
$(XAMARIN_IOS_CONFIGURE_FLAGS) \
|
||||
|
||||
ifeq ($(WATCH_MONO_PATH),$(MONO_PATH))
|
||||
TOOLS64_CONFIGURE_FLAGS += --with-monotouch_watch=yes
|
||||
else
|
||||
TOOLS64_CONFIGURE_FLAGS += --with-monotouch_watch=no
|
||||
endif
|
||||
|
||||
TOOLS64_ACVARS = $(COMMON_ACVARS)
|
||||
|
||||
TOOLS64_CONFIGURE_ENVIRONMENT = \
|
||||
|
@ -495,79 +485,6 @@ install-local:: install-tools-tvos
|
|||
install-tools:: install-tools-tvos
|
||||
endif
|
||||
|
||||
#
|
||||
# Xamarin.WatchOS BCL assemblies
|
||||
#
|
||||
# We need to build the WatchOS BCL using the same mono checkout as we're using for the
|
||||
# corresponding Mono runtimes, which means we can't use the normal tools64 build
|
||||
#
|
||||
# Also we can't reuse the existing watchsimulator/targetwatch builds, since their
|
||||
# monos don't run (correctly) on desktop OSX.
|
||||
#
|
||||
# So we build an entire Mono just to build the WatchOS BCL.
|
||||
#
|
||||
|
||||
WATCHBCL_CFLAGS=-arch x86_64 -mmacosx-version-min=$(MIN_OSX_SDK_VERSION)
|
||||
WATCHBCL_CXXFLAGS=-arch x86_64 -mmacosx-version-min=$(MIN_OSX_SDK_VERSION)
|
||||
WATCHBCL_LDFLAGS=-arch x86_64 -mmacosx-version-min=$(MIN_OSX_SDK_VERSION) $(COMMON_LDFLAGS)
|
||||
WATCHBCL_ACVARS = $(COMMON_ACVARS)
|
||||
|
||||
|
||||
WATCHBCL_CONFIGURE_FLAGS= --build=x86_64-apple-darwin10 \
|
||||
--prefix=$(BUILD_DESTDIR)/watchbcl \
|
||||
--enable-maintainer-mode \
|
||||
--cache-file=../watchbcl.config.cache \
|
||||
--with-glib=embedded \
|
||||
--enable-minimal=com \
|
||||
--with-profile4_x=no \
|
||||
--with-monotouch=no \
|
||||
--with-monotouch_watch=yes \
|
||||
--with-monotouch_tv=no \
|
||||
--with-xammac=no \
|
||||
--with-mcs-docs=no \
|
||||
--disable-nls \
|
||||
--disable-iconv \
|
||||
--disable-boehm \
|
||||
$(XAMARIN_IOS_CONFIGURE_FLAGS)
|
||||
|
||||
WATCHBCL_CONFIGURE_ENVIRONMENT = \
|
||||
$(WATCHBCL_ACVARS) \
|
||||
CFLAGS="$(WATCHBCL_CFLAGS)" \
|
||||
CXXFLAGS="$(WATCHBCL_CXXFLAGS)" \
|
||||
LDFLAGS="$(WATCHBCL_LDFLAGS)" \
|
||||
CC="$(MAC_CC)" \
|
||||
CXX="$(MAC_CXX)" \
|
||||
|
||||
ifdef INCLUDE_WATCH
|
||||
setup:: setup-watchbcl
|
||||
build:: build-watchbcl
|
||||
clean-local:: clean-watchbcl
|
||||
endif
|
||||
|
||||
watchbcl: build-watchbcl install-tools-watch
|
||||
|
||||
setup-watchbcl: .stamp-configure-watchbcl
|
||||
|
||||
ifneq ($(WATCH_MONO_PATH),$(MONO_PATH))
|
||||
.stamp-configure-watchbcl: $(WATCH_MONO_PATH)/configure
|
||||
$(Q) $(WATCHBCL_CONFIGURE_ENVIRONMENT) ./wrap-configure.sh watchbcl ../$(WATCH_MONO_PATH)/configure $(WATCHBCL_CONFIGURE_FLAGS)
|
||||
endif
|
||||
|
||||
build-tools-bcl: build-watchbcl
|
||||
build-tools: build-watchbcl
|
||||
|
||||
ifeq ($(WATCH_MONO_PATH),$(MONO_PATH))
|
||||
.stamp-build-watchbcl: .stamp-build-tools64 $(MONO_DEPENDENCIES)
|
||||
else
|
||||
.stamp-build-watchbcl: .stamp-configure-watchbcl .stamp-build-tools64 $(MONO_DEPENDENCIES)
|
||||
$(MAKE) -C watchbcl all EXTERNAL_MCS=$(SYSTEM_CSC) EXTERNAL_RUNTIME=$(SYSTEM_MONO)
|
||||
$(MAKE) -C watchbcl install EXTERNAL_MCS=$(SYSTEM_CSC) EXTERNAL_RUNTIME=$(SYSTEM_MONO)
|
||||
endif
|
||||
$(Q) touch $@
|
||||
|
||||
clean-watchbcl:
|
||||
rm -rf watchbcl .stamp-*-watchbcl watchbcl.config.cache
|
||||
|
||||
#
|
||||
# Xamarin.iOS/WatchOS/TVOS BCL assemblies
|
||||
#
|
||||
|
@ -589,7 +506,6 @@ IOS_REPL_ASSEMBLIES = mscorlib System System.Core System.Xml Mono.CSharp
|
|||
|
||||
IOS_FACADE_ASSEMBLIES = $(monotouch_PARALLEL_SUBDIRS) $(monotouch_SUBDIRS)
|
||||
|
||||
# TVOS/WATCHOS BCL is built from a different mono branch and the assembly list might differ across time
|
||||
TVOS_ASSEMBLIES = $(IOS_ASSEMBLIES)
|
||||
WATCHOS_ASSEMBLIES = $(filter-out Mono.Security Mono.Data.Tds,$(IOS_ASSEMBLIES))
|
||||
TVOS_FACADE_ASSEMBLIES = $(IOS_FACADE_ASSEMBLIES)
|
||||
|
@ -610,8 +526,8 @@ watch-facade-check: $(WATCH_BCL_TARGETS)
|
|||
disabled-watch-facade-check: $(WATCH_BCL_TARGETS)
|
||||
$(Q) rm -f .$@*
|
||||
$(Q) echo $(WATCHOS_FACADE_ASSEMBLIES) | tr ' ' '\n' | sort > .$@1
|
||||
$(Q) ls -1 $(WATCH_MONO_PATH)/mcs/class/lib/monotouch_watch/Facades | grep dll$$ | sed 's/[.]dll//' | sort > .$@2
|
||||
$(Q) if ! diff -u .$@1 .$@2; then echo "\n*** There are Facade assemblies in "$(WATCH_MONO_PATH)/mcs/class/lib/monotouch_watch/Facades" not defined in "$(FACADE_SUBDIRS_MK)" ***\n"; exit 1; fi
|
||||
$(Q) ls -1 $(MONO_PATH)/mcs/class/lib/monotouch_watch/Facades | grep dll$$ | sed 's/[.]dll//' | sort > .$@2
|
||||
$(Q) if ! diff -u .$@1 .$@2; then echo "\n*** There are Facade assemblies in "$(MONO_PATH)/mcs/class/lib/monotouch_watch/Facades" not defined in "$(FACADE_SUBDIRS_MK)" ***\n"; exit 1; fi
|
||||
$(Q) rm -f .$@*
|
||||
|
||||
tvos-facade-check: $(TVOS_BCL_TARGETS)
|
||||
|
@ -1546,11 +1462,6 @@ llvm64: install-llvm64
|
|||
$(MONO_PATH)/tools/offsets-tool/MonoAotOffsetsDumper.exe: $(MONO_PATH)/configure $(wildcard $(MONO_PATH)/tools/offsets-tool/*.cs)
|
||||
$(Q) $(MAKE) -C $(dir $@) MonoAotOffsetsDumper.exe
|
||||
|
||||
ifneq ($(WATCH_MONO_PATH),$(MONO_PATH))
|
||||
$(WATCH_MONO_PATH)/tools/offsets-tool/MonoAotOffsetsDumper.exe: $(wildcard $(WATCH_MONO_PATH)/tools/offsets-tool/*.cs)
|
||||
$(Q) $(MAKE) -C $(dir $@) MonoAotOffsetsDumper.exe
|
||||
endif
|
||||
|
||||
targetwatch/mono/arch/arm/arm_dpimacros.h: .stamp-configure-targetwatch
|
||||
$(Q) $(MAKE) -C $(dir $@) $(notdir $@)
|
||||
|
||||
|
|
26
src/Makefile
26
src/Makefile
|
@ -667,7 +667,7 @@ WATCH_BMONO = MONO_PATH=$(WATCH_LIBDIR)/repl $(IOS_DESTDIR)$(MONOTOUCH_PREFIX)/b
|
|||
WATCH_GENERATOR=$(BUILD_DIR)/common/bgen.exe
|
||||
WATCH_GENERATE=$(SYSTEM_MONO) --debug $(WATCH_GENERATOR)
|
||||
WATCH_GENERATED_DEFINES= -d:WATCH -d:XAMCORE_3_0 -d:XAMCORE_2_0 -d:__UNIFIED__
|
||||
WATCH_BCL_DIR = $(WATCH_MONO_PATH)/mcs/class/lib/monotouch_watch
|
||||
WATCH_BCL_DIR = $(MONO_PATH)/mcs/class/lib/monotouch_watch
|
||||
|
||||
WATCHOS_EXTRA_CORE_SOURCES = \
|
||||
$(WATCH_BUILD_DIR)/Constants.cs \
|
||||
|
@ -732,7 +732,7 @@ $(BUILD_DIR)/watchos.rsp: Makefile Makefile.generator frameworks.sources
|
|||
-tmpdir=$(WATCH_BUILD_DIR)/watch \
|
||||
-baselib=$(WATCH_BUILD_DIR)/watch/core.dll \
|
||||
-attributelib=$(WATCH_BUILD_DIR)/Xamarin.WatchOS.BindingAttributes.dll \
|
||||
-r=$(WATCH_MONO_PATH)/mcs/class/lib/monotouch_watch/System.dll \
|
||||
-r=$(MONO_PATH)/mcs/class/lib/monotouch_watch/System.dll \
|
||||
-ns=MonoTouch.ObjCRuntime \
|
||||
-native-exception-marshalling \
|
||||
$(WATCH_GENERATED_DEFINES) \
|
||||
|
@ -766,42 +766,42 @@ $(WATCH_BUILD_DIR)/reference/MonoTouch.NUnitLite%dll $(WATCH_BUILD_DIR)/referenc
|
|||
|
||||
# System.Drawing.Primitives.dll is special
|
||||
|
||||
$(WATCH_MONO_PATH)/mcs/class/lib/monotouch_watch/reference_Facades/System.Drawing.Primitives.dll: $(WATCH_BUILD_DIR)/reference/Xamarin.WatchOS.dll
|
||||
$(call Q_PROF_CSC,watch) $(MAKE) $(if $(V),,-s) -C $(WATCH_MONO_PATH)/mcs/class/Facades/System.Drawing.Primitives PROFILE=monotouch_watch LIBRARY_SUBDIR=reference_Facades EXTERNAL_FACADE_DRAWING_REFERENCE="$(abspath $(WATCH_BUILD_DIR)/reference/Xamarin.WatchOS.dll)"
|
||||
$(MONO_PATH)/mcs/class/lib/monotouch_watch/reference_Facades/System.Drawing.Primitives.dll: $(WATCH_BUILD_DIR)/reference/Xamarin.WatchOS.dll
|
||||
$(call Q_PROF_CSC,watch) $(MAKE) $(if $(V),,-s) -C $(MONO_PATH)/mcs/class/Facades/System.Drawing.Primitives PROFILE=monotouch_watch LIBRARY_SUBDIR=reference_Facades EXTERNAL_FACADE_DRAWING_REFERENCE="$(abspath $(WATCH_BUILD_DIR)/reference/Xamarin.WatchOS.dll)"
|
||||
@touch $@
|
||||
|
||||
$(WATCH_BUILD_DIR)/%/Facades/System.Drawing.Primitives.dll: $(WATCH_MONO_PATH)/mcs/class/lib/monotouch_watch/%_Facades/System.Drawing.Primitives.dll | $(WATCH_BUILD_DIR)/reference/Facades
|
||||
$(WATCH_BUILD_DIR)/%/Facades/System.Drawing.Primitives.dll: $(MONO_PATH)/mcs/class/lib/monotouch_watch/%_Facades/System.Drawing.Primitives.dll | $(WATCH_BUILD_DIR)/reference/Facades
|
||||
$(Q) cp $< $@
|
||||
|
||||
# netstandard.dll is special
|
||||
|
||||
$(WATCH_MONO_PATH)/mcs/class/lib/monotouch_watch/reference_Facades/netstandard.dll: $(WATCH_BUILD_DIR)/reference/Xamarin.WatchOS.dll
|
||||
$(call Q_PROF_CSC,watch) $(MAKE) $(if $(V),,-s) -C $(WATCH_MONO_PATH)/mcs/class/Facades/netstandard PROFILE=monotouch_watch LIBRARY_SUBDIR=reference_Facades EXTERNAL_FACADE_DRAWING_REFERENCE="$(abspath $(WATCH_BUILD_DIR)/reference/Xamarin.WatchOS.dll)"
|
||||
$(MONO_PATH)/mcs/class/lib/monotouch_watch/reference_Facades/netstandard.dll: $(WATCH_BUILD_DIR)/reference/Xamarin.WatchOS.dll
|
||||
$(call Q_PROF_CSC,watch) $(MAKE) $(if $(V),,-s) -C $(MONO_PATH)/mcs/class/Facades/netstandard PROFILE=monotouch_watch LIBRARY_SUBDIR=reference_Facades EXTERNAL_FACADE_DRAWING_REFERENCE="$(abspath $(WATCH_BUILD_DIR)/reference/Xamarin.WatchOS.dll)"
|
||||
@touch $@
|
||||
|
||||
$(WATCH_BUILD_DIR)/%/Facades/netstandard.dll: $(WATCH_MONO_PATH)/mcs/class/lib/monotouch_watch/%_Facades/netstandard.dll | $(WATCH_BUILD_DIR)/reference/Facades
|
||||
$(WATCH_BUILD_DIR)/%/Facades/netstandard.dll: $(MONO_PATH)/mcs/class/lib/monotouch_watch/%_Facades/netstandard.dll | $(WATCH_BUILD_DIR)/reference/Facades
|
||||
$(Q) cp $< $@
|
||||
|
||||
# System.Net.Http.dll is special. See comment in src/Makefile
|
||||
|
||||
WATCH_EXTRA_SYSTEM_NET_HTTP_FILES = \
|
||||
$(abspath $(WATCH_MONO_PATH)/mcs/class/System.Net.Http/HttpClientEx.cs) \
|
||||
$(abspath $(MONO_PATH)/mcs/class/System.Net.Http/HttpClientEx.cs) \
|
||||
$(abspath $(TOP)/src/Foundation/NSUrlSessionHandler.cs) \
|
||||
$(abspath $(TOP)/src/ObjCRuntime/RuntimeOptions.cs) \
|
||||
|
||||
# build (into custom LIBRARY_SUBDIR)
|
||||
$(WATCH_MONO_PATH)/mcs/class/lib/monotouch_watch/reference/System.Net.Http%dll $(WATCH_MONO_PATH)/mcs/class/lib/monotouch_watch/reference/System.Net.Http%pdb: $(WATCH_EXTRA_SYSTEM_NET_HTTP_FILES) $(WATCH_MONO_PATH)/mcs/class/lib/monotouch_watch/System.Net.Http.dll $(WATCH_BUILD_DIR)/reference/Xamarin.WatchOS.dll
|
||||
$(call Q_PROF_CSC,watch) $(MAKE) $(if $(V),,-s) -C $(WATCH_MONO_PATH)/mcs/class/System.Net.Http PROFILE=monotouch_watch LIBRARY_SUBDIR=reference MONOTOUCH_MCS_FLAGS=$(IOS_CSC_FLAGS) EXTRA_LIB_MCS_FLAGS="-r:$(abspath $(WATCH_BUILD_DIR)/reference/Xamarin.WatchOS.dll) $(WATCH_EXTRA_SYSTEM_NET_HTTP_FILES) -D:XAMCORE_2_0 -D:XAMCORE_3_0 -D:XAMARIN_MODERN -D:SYSTEM_NET_HTTP -D:UNIFIED -D:__UNIFIED__"
|
||||
$(MONO_PATH)/mcs/class/lib/monotouch_watch/reference/System.Net.Http%dll $(MONO_PATH)/mcs/class/lib/monotouch_watch/reference/System.Net.Http%pdb: $(WATCH_EXTRA_SYSTEM_NET_HTTP_FILES) $(MONO_PATH)/mcs/class/lib/monotouch_watch/System.Net.Http.dll $(WATCH_BUILD_DIR)/reference/Xamarin.WatchOS.dll
|
||||
$(call Q_PROF_CSC,watch) $(MAKE) $(if $(V),,-s) -C $(MONO_PATH)/mcs/class/System.Net.Http PROFILE=monotouch_watch LIBRARY_SUBDIR=reference MONOTOUCH_MCS_FLAGS=$(IOS_CSC_FLAGS) EXTRA_LIB_MCS_FLAGS="-r:$(abspath $(WATCH_BUILD_DIR)/reference/Xamarin.WatchOS.dll) $(WATCH_EXTRA_SYSTEM_NET_HTTP_FILES) -D:XAMCORE_2_0 -D:XAMCORE_3_0 -D:XAMARIN_MODERN -D:SYSTEM_NET_HTTP -D:UNIFIED -D:__UNIFIED__"
|
||||
@# If the make we executed didn't result in building the dll/pdb (because make determined it wasn't necessary to rebuild),
|
||||
@# then this make can end up confused and in an infinite loop. So touch the output files, to make sure they look rebuilt to make.
|
||||
$(Q) touch $(basename $@).dll $(basename $@).pdb
|
||||
|
||||
# sign dll
|
||||
$(WATCH_BUILD_DIR)/reference/System.Net.Http.dll: $(WATCH_MONO_PATH)/mcs/class/lib/monotouch_watch/reference/System.Net.Http.dll | $(WATCH_BUILD_DIR)/reference
|
||||
$(WATCH_BUILD_DIR)/reference/System.Net.Http.dll: $(MONO_PATH)/mcs/class/lib/monotouch_watch/reference/System.Net.Http.dll | $(WATCH_BUILD_DIR)/reference
|
||||
$(Q) cp $< $@
|
||||
$(call Q_PROF_SN,watch) MONO_CFG_DIR=$(TOP) $(SYSTEM_SN) -q -R $@ $(PRODUCT_KEY_PATH)
|
||||
|
||||
$(WATCH_BUILD_DIR)/reference/System.Net.Http.pdb: $(WATCH_MONO_PATH)/mcs/class/lib/monotouch_watch/reference/System.Net.Http.pdb | $(WATCH_BUILD_DIR)/reference
|
||||
$(WATCH_BUILD_DIR)/reference/System.Net.Http.pdb: $(MONO_PATH)/mcs/class/lib/monotouch_watch/reference/System.Net.Http.pdb | $(WATCH_BUILD_DIR)/reference
|
||||
$(Q) cp $< $@
|
||||
|
||||
$(PROJECT_DIR)/xamwatch.csproj: xamwatch.tmpl.csproj Makefile $(wildcard $(TOP)/*.sources)
|
||||
|
|
|
@ -89,7 +89,6 @@ test.config: Makefile $(TOP)/Make.config
|
|||
@echo "MONOTOUCH_PREFIX=$(abspath $(MONOTOUCH_PREFIX))" >> $@
|
||||
@echo "IOS_DESTDIR=$(abspath $(IOS_DESTDIR))" >> $@
|
||||
@echo "MAC_DESTDIR=$(abspath $(MAC_DESTDIR))" >> $@
|
||||
@echo "WATCH_MONO_PATH=$(abspath $(WATCH_MONO_PATH))" >> $@
|
||||
@echo "JENKINS_RESULTS_DIRECTORY=$(abspath $(JENKINS_RESULTS_DIRECTORY))" >> $@
|
||||
@echo "INCLUDE_DEVICE=$(INCLUDE_DEVICE)" >> $@
|
||||
|
||||
|
@ -98,7 +97,6 @@ test-system.config:
|
|||
@echo "MONOTOUCH_PREFIX=$(IOS_FRAMEWORK_DIR)/Versions/Current" >> $@
|
||||
@echo "IOS_DESTDIR=/" >> $@
|
||||
@echo "MAC_DESTDIR=/" >> $@
|
||||
@echo "WATCH_MONO_PATH=$(abspath $(WATCH_MONO_PATH))" >> $@
|
||||
@echo "JENKINS_RESULTS_DIRECTORY=$(abspath $(JENKINS_RESULTS_DIRECTORY))" >> $@
|
||||
@echo "INCLUDE_DEVICE=$(INCLUDE_DEVICE)" >> $@
|
||||
|
||||
|
|
|
@ -11,7 +11,6 @@ namespace xharness
|
|||
{
|
||||
public Harness Harness;
|
||||
public string MonoPath { get { return Harness.MONO_PATH; } }
|
||||
public string WatchMonoPath { get { return Harness.WATCH_MONO_PATH; } }
|
||||
public string TestName;
|
||||
|
||||
static readonly Dictionary<string, string[]> ignored_tests = new Dictionary<string, string[]> {
|
||||
|
@ -123,7 +122,7 @@ namespace xharness
|
|||
var testName = TestName == "mscorlib" ? "corlib" : TestName;
|
||||
var main_test_sources = Path.Combine (MonoPath, "mcs", "class", testName, testName + "_test.dll.sources");
|
||||
var main_test_files = File.ReadAllLines (main_test_sources);
|
||||
var watch_test_sources = Path.Combine (WatchMonoPath, "mcs", "class", testName, testName + "_test.dll.sources");
|
||||
var watch_test_sources = Path.Combine (MonoPath, "mcs", "class", testName, testName + "_test.dll.sources");
|
||||
var watch_test_files = File.ReadAllLines (watch_test_sources).Where ((arg) => !string.IsNullOrEmpty (arg));
|
||||
var template_path = Path.Combine (Harness.RootDirectory, "bcl-test", TestName, TestName + ".csproj.template");
|
||||
var csproj_input = File.ReadAllText (template_path);
|
||||
|
|
|
@ -73,7 +73,6 @@ namespace xharness
|
|||
public string TodayContainerTemplate { get; set; }
|
||||
public string TodayExtensionTemplate { get; set; }
|
||||
public string MONO_PATH { get; set; } // Use same name as in Makefiles, so that a grep finds it.
|
||||
public string WATCH_MONO_PATH { get; set; } // Use same name as in Makefiles, so that a grep finds it.
|
||||
public string TVOS_MONO_PATH { get; set; } // Use same name as in Makefiles, so that a grep finds it.
|
||||
public bool INCLUDE_IOS { get; set; }
|
||||
public bool INCLUDE_TVOS { get; set; }
|
||||
|
@ -209,7 +208,6 @@ namespace xharness
|
|||
ParseConfigFiles ();
|
||||
var src_root = Path.GetDirectoryName (Path.GetFullPath (RootDirectory));
|
||||
MONO_PATH = Path.GetFullPath (Path.Combine (src_root, "external", "mono"));
|
||||
WATCH_MONO_PATH = make_config ["WATCH_MONO_PATH"];
|
||||
TVOS_MONO_PATH = MONO_PATH;
|
||||
INCLUDE_IOS = make_config.ContainsKey ("INCLUDE_IOS") && !string.IsNullOrEmpty (make_config ["INCLUDE_IOS"]);
|
||||
INCLUDE_TVOS = make_config.ContainsKey ("INCLUDE_TVOS") && !string.IsNullOrEmpty (make_config ["INCLUDE_TVOS"]);
|
||||
|
|
Загрузка…
Ссылка в новой задаче