These methods were already partially using GCHandles, so convert the parameter
using ObjectWrapper to GCHandle, and port the rest of the existing logic to
use the new helper API.
Some of the fixes done for the warnings have breaking changes. Move back
to int and ensure that we do not have any compilation errors (we are
using -Werror).
Fixes: https://github.com/xamarin/xamarin-macios/issues/7509
* [Runtime] Enable the -Wshorten-64-to-32 flag and fix all warnings.
We want to enable the -Wconversion but that will raise too many warning
for a single commit. We are enabiling one by one the flags included in
-Wconversion so that we have smaller diffs.
-Wshorten-64-to-32 adds warnings when there is a implicit conversion that
loses integer precision. We are moving all the 32 to 64 conversions to
use 64. Expecially since most of the code changed is related with sizes,
legths and params counts that are never going to be negative.
Co-Authored-By: Rolf Bjarne Kvinge <rolf@xamarin.com>
Enable the -Wsign-compare which will raise issues when a comparison
between signed and unsigned values could produce an incorrect result
and fix all the raised warnings.
It's now required to cast objc_msgSend[Super] to a function of the correct
signature, so let's do that.
Also remove the define that allowed us to use the previous behavior.
It turns out 'object_getClass' and '[obj class]' does not return exactly the
same. It seems this would have gone unnoticed (the difference would not be
important), except that it made us run into yet another Objective-C runtime
bug...
So return to the previous behavior (call 'object_getClass'), and instead call
'[obj class]' as well just before to make sure the Class instance we get back
from 'object_getClass' is initialized properly.
Now you may wonder why the return value from '[obj class]' has an effect on
the different return value from 'object_getClass', and the answer is that I
have no idea whatsoever. It works, and that makes me happy.
Fixes https://github.com/xamarin/xamarin-macios/issues/6302.
* [runtime] Add an inner exception parameter to Runtime.CreateProductException.
This allows us to simplify code by using inner (and outer) exceptions as
a means to provide information instead of passing extra information
around in order to create decent exceptions.
One example is how we pass the selector and method name to the method
that converts from a native id to a managed NSObject instance: passing
this information is not necessary anymore if we can use two exceptions,
one for the failure to convert from an id to a NSObject instance,
wrapped in a second that tells which method/selector call ran into this
conversion problem.
* [runtime] Throw better exceptions when the dynamic registrar can't marshal something.
* [runtime] Throw a better exception when something goes wrong when trying to marshal a return value.
* [runtime] Use inner exceptions to convey failure information instead of trying to create a single exception with all we know.
* Fix merge problem.
* Add support for delegates as return values in protocol members. Fixes#4102.
This required a few changes:
* The generator now emits the DelegateProxy attribute for property getters in
protocol interfaces.
* The generator now emits the DelegateProxy attribute in ProtocolMember
attributes (and the ProtocolMember attribute has been extended with
additional properties for this purpose).
* The generator now emits the BlockProxy attribute for the parameter in
property setters.
* The generator now emits the BlockProxy attribute in ProtocolMember
attributes for property setters.
* The static registrar now emits the metadata token for the
DelegateProxy.DelegateType property into the generated code so that the
DelegateProxy attribute itself isn't needed at runtime. This is required
when the dynamic registrar has been optimized away.
Fixes https://github.com/xamarin/xamarin-macios/issues/4102.
* [tests] Update MX4105 test to expect new warnings.
* Convert it into a MM8027/MT8027 error (with documentation).
* Add information about the selector and managed method that triggered the error.
Now the problem reported in issue #4254 shows up as:
> ObjCRuntime.RuntimeException: Failed to marshal the Objective-C object 0x7f8080412810 (type: UIView). Could not find an existing managed instance for this object, nor was it possible to create a new managed instance (because the type 'UIKit.UIView&' does not have a constructor that takes one IntPtr argument).
> Additional information:
> Selector: popoverController:willRepositionPopoverToRect:inView:
> Method: UIKit.UIPopoverController+_UIPopoverControllerDelegate.WillReposition(UIKit.UIPopoverController, CoreGraphics.CGRect ByRef, UIKit.UIView ByRef)
instead of just:
> ObjCRuntime.RuntimeException: Failed to marshal the Objective-C object 0x7f8080412810 (type: UIView). Could not find an existing managed instance for this object, nor was it possible to create a new managed instance (because the type 'UIKit.UIView&' does not have a constructor that takes one IntPtr argument).
which makes it much easier to understand, track down, and fix/work around,
both for customers and ourselves.
Avoid using a static library initializer by using a constant recursive mutex
initializer.
Static initializers are bad because there's a significant overhead to executing them.
* [linker] Optimize calls to BlockLiteral.SetupBlock to inject the block signature.
Optimize calls to BlockLiteral.SetupBlock[Unsafe] to calculate the block
signature at build time, and inject it into the call site.
This makes block invocations 10-15x faster (I've added tests that asserts at
least an 8x increase).
It's also required in order to be able to remove the dynamic registrar code in
the future (since calculating the block signature at runtime requires the
dynamic registrar).
* [mtouch/mmp] Add support for reporting errors/warnings that point to the code line causing the error/warning.
Add support for reporting errors/warnings that point to the code line causing
the error/warning by adding ErrorHelper overloads that take the exact
instruction to report (previously we defaulted to the first line/instruction
in a method).
* [tests] Add support for asserting filename/linenumber in warning messages.
* Make all methods that manually create BlockLiterals optimizable.
* [tests] Create a BaseOptimizeGeneratedCodeTest test that's included in both XI's and XM's link all test.
* [tests] Add link all test (for both XI and XM) to test the BlockLiteral.SetupBlock optimization.
* [tests] Add mtouch/mmp tests for the BlockLiteral.SetupBlock optimization.
* [tests][linker] Make the base test class abstract, so tests in the base class aren't executed twice.
* [tests][linker] Don't execute linkall-only tests in linksdk.
The optimization tests only apply when the test assembly is linked, and that
only happens in linkall, so exclude those tests in linksdk.
* [tests][mmptest] Update test according to mmp changes.
Fixes these test failures:
1) Failed : Xamarin.MMP.Tests.MMPTests.MM0132("inline-runtime-arch")
The warning 'MM0132: Unknown optimization: 'inline-runtime-arch'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size.' was not found in the output:
Message #1 did not match:
actual: 'Unknown optimization: 'inline-runtime-arch'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size, blockliteral-setupblock.'
expected: 'Unknown optimization: 'inline-runtime-arch'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size.'
Message #2 did not match:
actual: 'Unknown optimization: 'inline-runtime-arch'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size, blockliteral-setupblock.'
expected: 'Unknown optimization: 'inline-runtime-arch'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size.'
2) Failed : Xamarin.MMP.Tests.MMPTests.MM0132("foo")
The warning 'MM0132: Unknown optimization: 'foo'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size.' was not found in the output:
Message #1 did not match:
actual: 'Unknown optimization: 'foo'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size, blockliteral-setupblock.'
expected: 'Unknown optimization: 'foo'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size.'
Message #2 did not match:
actual: 'Unknown optimization: 'foo'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size, blockliteral-setupblock.'
expected: 'Unknown optimization: 'foo'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size.'
* [tests][linker] Fix typo.
Fixes this test failure:
1) SetupBlock_CustomDelegate (Linker.Shared.BaseOptimizeGeneratedCodeTest.SetupBlock_CustomDelegate)
Counter
Expected: 1
But was: 2
* [registrar] Minor adjustment to error message to match previous (and better) behavior.
Fixes this test failure:
1) Failed : Xamarin.Registrar.GenericType_WithInvalidParameterTypes
The error 'MT4136: The registrar cannot marshal the parameter type 'System.Collections.Generic.List`1<U>' of the parameter 'arg' in the method 'Open`1.Bar(System.Collections.Generic.List`1<U>)'' was not found in the output:
Message #1 did not match:
actual: 'The registrar cannot marshal the parameter type 'System.Collections.Generic.List`1<Foundation.NSObject>' of the parameter 'arg' in the method 'Open`1.Bar(System.Collections.Generic.List`1<U>)''
expected: 'The registrar cannot marshal the parameter type 'System.Collections.Generic.List`1<U>' of the parameter 'arg' in the method 'Open`1.Bar(System.Collections.Generic.List`1<U>)''
* [docs] mmp shows MM errors/warnings.
* [docs] Improve according to reviews.
* [tests] Fix merge failure causing test duplication.
Converting to and from smart enums and their corresponding native value
requires knowing the conversion function, since each smart enum has its own
conversion function.
The dynamic registrar can do this at runtime, but it's something that can be
computed in the static registrar at build time, so do that. The static
registrar will now embed the metadata token (as a token reference) in the
generated code, which can be used at runtime to find the conversion method,
without requiring anything from dynamic registrar.
This requires some refactoring in the conversion methods to allow passing more
information around (the `context` parameter in the conversion functions, which
the smart enum conversion methods now use for the token reference).
It turns out this is a massive improvement (although the scenarios where this
is relevant are rare): a simple test case [1] is 300x faster (from ~30s to
0.1s).
[1]: https://gist.github.com/rolfbjarne/961af28d1c2727b256fbcdfd6aa65e98
* [runtime] Remove specialized function for getting the Selector/Class handle of a managed Selector/Class instance.
The existing function to get the handle of an INativeObject works just as fine.
* [runtime] Store and use a prebuilt XamMacLauncher.
Some changes in the runtime needs corresponding changes in XamMac.dll, but
since we're not changing XamMac.dll anymore, we can't change the runtime
either.
This means that we must add XamMacLauncher to the list of binaries we copy.
* [runtime] Store and use a prebuilt libxammac*.a as well.
The two functions mono_class_is_nullable and mono_class_get_nullable_param are
private mono symbols, which means we can't call them when using Xamarin.Mac
with libmono from a dynamic library.
Implement a fallback for this case, where we call a managed method when these
functions are not available (and restrict this workaround to Xamarin.Mac only,
since it's not needed for Xamarin.iOS).