Included changes are:
* New Cecil API in 2019-08
* Permit new symbols from networkable AOT profiler in symbols test
* Bump Mono to include fix for zlib linking, and new Cecil API
* We need to link against zlib now, if using libmono.a
* [Tests] Ignore memory hungry tests in old devices. (#6913)
* Ignore certain tests that use too many resources in old devices.
* Add missing tests that use too much memory on 32b devices.
* Build native code with -std=c++14.
Apple's headers now require -std=c++14 to compile their headers in C++ mode.
This fixes a compile error that would occur with the PhotosUI framework when
compiling code for C++.
* [mmp] Use -std=c++14 when compiling.
* Fix command line output.
* [mmp] Add all source files at the end, so they all get the -x clang argument applied.
* Limit when using c++14 in mtouch according to language.
It's now required to cast objc_msgSend[Super] to a function of the correct
signature, so let's do that.
Also remove the define that allowed us to use the previous behavior.
* Use the commonly used casing for `MSBuildSDKsPath` property
Handle "incorrectly" cased msbuild property names
msbuild property names are case insensitive. While generating the custom
app.config, in `SetToolsetProperty(..)` we try to update the property if
it already exists. But the name lookup was case sensitive, thus causing
the lookup to fail, resulting in two entries for the same property name
differing only in case. Eg. `MSBuildSDKsPath` vs `MSBuildSdksPath`.
* [mtouch] Whitelist new Brotli native symbols in Xamarin.Tests.Misc.PublicSymbols test
* [mtouch] Better assert in NoLLVMFailuresInWatchOS() test
We'd list the "LLVM failed" messages before even though the AOT might've crashed and the list is meaningless. Assert the exit code before that.
* [mtouch] Use new LLVM even for 32bit targets
See https://github.com/mono/mono/issues/14841 and https://github.com/mono/mono/issues/9621
* [mtouch] Work around slow LLVM in "don't link" test
See https://github.com/mono/mono/issues/14843
* Remove useless conditional
* Remove LLVM36 from Makefile
* [watch4] set right min version for arm64_32 based watch devices (#6307)
Fixes the confusion around `libmono-native*` (see for example ce5ba1e41d (commitcomment-33834491) ) when building with `MONO_BUILD_FROM_SOURCE=1`.
* reflect watchos64_32_version_min change from mono sdk
* Move mono hash info to mk/mono.mk so that existing scripts work.
* Add Makefile dependency on mono.mk where necessary
With 3e7bc29ade the Mono hash was moved from Make.config to mono.mk.
We need to add a Makefile dependency on this file wherever Make.config was used to track a Mono dependency.
* [tests] Copy mk/mono.mk to the XM test package.
* [tests] Update minOS version test after consolidating min watchOS versions everywhere.
Fixes this mtouch and mmptest failure:
1) Failed : Xamarin.Tests.ProductTests.MinOSVersion(watchOS,MinwatchOS,WatchOSSimulator,False)
Failures
Expected: <empty>
But was: < "Unexpected minOS version (expected 2.0.0, alternatively 2.0.0, found 5.1.0) in /Users/builder/jenkins/workspace/xamarin-macios/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/SDKs/Xamarin.WatchSimulator.sdk/usr/lib/libxamarin-debug.a (mono-runtime-debug.arm64_32.o).", "Unexpected minOS version (expected 2.0.0, alternatively 2.0.0, found 5.1.0) in /Users/builder/jenkins/workspace/xamarin-macios/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/SDKs/Xamarin.WatchSimulator.sdk/usr/lib/libxamarin-debug.a (bindings-debug.arm64_32.o).", "Unexpected minOS version (expected 2.0.0, alternatively 2.0.0, found 5.1.0) in /Users/builder/jenkins/workspace/xamarin-macios/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/SDKs/Xamarin.WatchSimulator.sdk/usr/lib/libxamarin-debug.a (bindings-generated-debug.arm64_32.o).", "Unexpected minOS version (expected 2.0.0, alternatively 2.0.0, found 5.1.0) in /Users/builder/jenkins/workspace/xamarin-macios/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/SDKs/Xamarin.WatchSimulator.sdk/usr/lib/libxamarin-debug.a (shared-debug.arm64_32.o).", "Unexpected minOS version (expected 2.0.0, alternatively 2.0.0, found 5.1.0) in /Users/builder/jenkins/workspace/xamarin-macios/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/SDKs/Xamarin.WatchSimulator.sdk/usr/lib/libxamarin-debug.a (runtime-debug.arm64_32.o).", "Unexpected minOS version (expected 2.0.0, alternatively 2.0.0, found 5.1.0) in /Users/builder/jenkins/workspace/xamarin-macios/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/SDKs/Xamarin.WatchSimulator.sdk/usr/lib/libxamarin-debug.a (trampolines-debug.arm64_32.o).", "Unexpected minOS version (expected 2.0.0, alternatively 2.0.0, found 5.1.0) in /Users/builder/jenkins/workspace/xamarin-macios/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/SDKs/Xamarin.WatchSimulator.sdk/usr/lib/libxamarin-debug.a (trampolines-invoke-debug.arm64_32.o).", "Unexpected minOS version (expected 2.0.0, alternatively 2.0.0, found 5.1.0) in /Users/builder/jenkins/workspace/xamarin-macios/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/SDKs/Xamarin.WatchSimulator.sdk/usr/lib/libxamarin-debug.a (xamarin-support-debug.arm64_32.o).", "Unexpected minOS version (expected 2.0.0, alternatively 2.0.0, found 5.1.0) in /Users/builder/jenkins/workspace/xamarin-macios/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/SDKs/Xamarin.WatchSimulator.sdk/usr/lib/libxamarin-debug.a (nsstring-localization-debug.arm64_32.o).", "Unexpected minOS version (expected 2.0.0, alternatively 2.0.0, found 5.1.0) in /Users/builder/jenkins/workspace/xamarin-macios/xamarin-macios/_ios-build/Library/Frameworks/Xamarin.iOS.framework/Versions/git/SDKs/Xamarin.WatchSimulator.sdk/usr/lib/libxamarin-debug.a (trampolines-varargs-debug.arm64_32.o)."... >
* [mmp] Fix make clean target
It needs an -r to remove directories:
```
rm: bin: is a directory
rm: obj: is a directory
```
* Add new xamarin_timezone_get_local_name() to a few more places
This includes:
* 32-bit version of Xamarin.Mac.dll and OpenTK.dll
* XamMac.dll and XamMac.CFNetwork.dll
* 32-bit versions of the runtime libraries (libxammac.a and friends).
* 32-bit version of the partial static library for Xamarin.Mac.
* Classic support in the generator.
We still ship a few Classic files so that Visual Studio for Mac continue to detect that Xamarin.Mac is installed (otherwise VSfM won't open Classic projects, which makes it impossible to use the migration wizard).
This makes our build slightly faster.
Partial fix for #6300.
* Bump VSMac to 8.1.0.2742 to fix msbuild issues (#6279)
* Bump VSMac to 8.1.0.2742 to fix msbuild issues
This is required to get the support for the msbuild `ToolsVersion`
change from `15.0` to `Current`.
* [tests][msbuild] Fix Binding resources test with updated msbuild
Test failure with updated msbuild and vsmac 8.1:
```
Xamarin.iOS.Tasks.NativeReferencesNoEmbedding("iPhone").ShouldNotUnnecessarilyRebuildBindingProject(True)
Binding project build did not create package?
Expected: True
But was: False
at Xamarin.iOS.Tasks.NativeReferencesNoEmbedding.ShouldNotUnnecessarilyRebuildBindingProject (System.Boolean framework) [0x000a0] in <74b8f7d8a53e40109916d305bb4d7403>:0
at (wrapper managed-to-native) System.Reflection.RuntimeMethodInfo.InternalInvoke(System.Reflection.RuntimeMethodInfo,object,object[],System.Exception&)
at System.Reflection.RuntimeMethodInfo.Invoke (System.Object obj, System.Reflection.BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo cul
ture) [0x0006a] in <0519fa732e8845b6a809ce9180f541db>:0
```
The test builds the project multiple times. Before the 3rd build, the project
file's timestamp is updated and expects that the binding package will be
rebuilt. But it is not, because the target `_CreateBindingResourcePackage`
doesn't depend on that project file. So, add that to the target inputs.
* [nuget] Use xibuild to run nuget
Fix errors seen during `nuget restore` for tests:
```
Users/builder/jenkins/workspace/xamarin-macios-pr-builder/tests/xammac_tests/xammac_tests.csproj(213,3): error MSB4024: The imported project file "/Library/Frameworks/Mono.framework/External/xbuild/Xamarin/Mac/Xamarin.Mac.CSharp.targets" could not be loaded. Could not find file "/Library/Frameworks/Mono.framework/External/xbuild/Xamarin/Mac/Xamarin.Mac.CSharp.targets"
```
* [xibuild] Fix incorrect mscorlib.dll being used (#6068)
* [xibuild] Fix incorrect mscorlib.dll being used
The `GuiUnit_NET_4_5` project, when built with `xibuild` uses the wrong `mscorlib.dll`.
From https://github.com/xamarin/xamarin-macios/issues/5760#issuecomment-472457202 :
```
- mscorlib.dll is being used from mono/4.5 and the other system assemblies are from mono/4.5-api
- GuiNet* project is built with xibuild
What is happening here is:
xibuild sets[1] `SetToolsetProperty ("TargetFrameworkRootPath", FrameworksDirectory + Path.DirectorySeparatorChar);`
which points to `/Library/Frameworks/Mono.framework/Versions/Current/lib/mono/xbuild-frameworks`.
This causes $(FrameworkPathOverride) to be set[2] to `/Library/Frameworks/Mono.framework/Versions/Current/lib/mono/xbuild-frameworks/.NETFramework/v4.5`,
but that doesn't have a mscorlib.dll, so it gets reset[3] to /Library/Frameworks/Mono.framework/Versions/5.22.0/lib/mono/4.5/.
If we don't set TargetFrameworkRoothPath, then we get `FrameworkPathOverride = /Library/Frameworks/Mono.framework/Versions/5.22.0/lib/mono/4.5-api`,
causing `_ExplicitReference=/Library/Frameworks/Mono.framework/Versions/5.22.0/lib/mono/4.5-api/mscorlib.dll`(correct one) to be used.
```
Fixes https://github.com/xamarin/xamarin-macios/issues/5760
1. https://github.com/xamarin/xamarin-macios/blob/master/tools/xibuild/Main.cs#L209
2. https://github.com/mono/msbuild/blob/xplat-master/src/Tasks/Microsoft.Common.CurrentVersion.targets#L79
3. https://github.com/mono/msbuild/blob/xplat-master/src/Tasks/Microsoft.Common.CurrentVersion.targets#L84
* Revert "Workaround https://github.com/xamarin/xamarin-macios/issues/5760 in generator csproj"
This reverts commit 9bd927bb7f.
The previous commit for xibuild removes the need for this.
* [xibuild] Handle "incorrectly" cased msbuild property names (#6202)
msbuild property names are case insensitive. While generating the custom
app.config, in `SetToolsetProperty(..)` we try to update the property if
it already exists. But the name lookup was case sensitive, thus causing
the lookup to fail, resulting in two entries for the same property name
differing only in case. Eg. `MSBuildSDKsPath` vs `MSBuildSdksPath`.
Fixed to ignore case.
Fixes https://github.com/mono/mono/issues/14765 .
* Bump VSMac to 8.1.0.2742 to fix msbuild issues
This is required to get the support for the msbuild `ToolsVersion`
change from `15.0` to `Current`.
* [tests][msbuild] Fix Binding resources test with updated msbuild
Test failure with updated msbuild and vsmac 8.1:
```
Xamarin.iOS.Tasks.NativeReferencesNoEmbedding("iPhone").ShouldNotUnnecessarilyRebuildBindingProject(True)
Binding project build did not create package?
Expected: True
But was: False
at Xamarin.iOS.Tasks.NativeReferencesNoEmbedding.ShouldNotUnnecessarilyRebuildBindingProject (System.Boolean framework) [0x000a0] in <74b8f7d8a53e40109916d305bb4d7403>:0
at (wrapper managed-to-native) System.Reflection.RuntimeMethodInfo.InternalInvoke(System.Reflection.RuntimeMethodInfo,object,object[],System.Exception&)
at System.Reflection.RuntimeMethodInfo.Invoke (System.Object obj, System.Reflection.BindingFlags invokeAttr, System.Reflection.Binder binder, System.Object[] parameters, System.Globalization.CultureInfo cul
ture) [0x0006a] in <0519fa732e8845b6a809ce9180f541db>:0
```
The test builds the project multiple times. Before the 3rd build, the project
file's timestamp is updated and expects that the binding package will be
rebuilt. But it is not, because the target `_CreateBindingResourcePackage`
doesn't depend on that project file. So, add that to the target inputs.
* [nuget] Use xibuild to run nuget
Fix errors seen during `nuget restore` for tests:
```
Users/builder/jenkins/workspace/xamarin-macios-pr-builder/tests/xammac_tests/xammac_tests.csproj(213,3): error MSB4024: The imported project file "/Library/Frameworks/Mono.framework/External/xbuild/Xamarin/Mac/Xamarin.Mac.CSharp.targets" could not be loaded. Could not find file "/Library/Frameworks/Mono.framework/External/xbuild/Xamarin/Mac/Xamarin.Mac.CSharp.targets"
```
We can't assume that the cached `lipo` output is part of the `.app`
since the directory for the later could be different.
E.g. we build two .csproj in out `mmptest` inside the same directory
and they share the same `obj` directory (used for caching) but have
different output directories
```
./obj/Release/mmp-cache/libmono-native.dylib
./bin/Release/UnifiedExample.app/Contents/MonoBundle/libmono-native.dylib
./bin/Release/XM45Example.app/Contents/MonoBundle/libmono-native.dylib
```
Without an update building the XM45 project would not include the
**required** `libmono-native.dylib` library and would crash when
executed.
So far this only applies to `QTKit`...
XM will now, by default, avoid natively link with QTKit unless it's
instructed to so explicitly using `--link-prohibited-frameworks`
ref: https://github.com/xamarin/xamarin-macios/issues/6039
This allows the optimization to be disabled in cases where one, or
many, a custom attribute(s) are required by the application at runtime.
While not ideal disabling this single step is much better than disabling
linking for the whole application.
A better approach is described in https://github.com/xamarin/xamarin-macios/issues/6048
but this configuration optimization makes sense independently of it.
Fix https://github.com/xamarin/xamarin-macios/issues/3655
```
Tuning.cs(300,8): warning CS0108: 'LoadOptionalReferencesStep.ProcessReferences(AssemblyDefinition)' hides inherited member 'LoadReferencesStep.ProcessReferences(AssemblyDefinition)'. Use the new keyword if hiding was intended. [/Users/poupou/git/master/xamarin-macios/tools/mmp/mmp.csproj]
```
it's not virtual and it's not being called back annyway.
This allows the optimization to be disabled in cases where one, or
many, a custom attribute(s) are required by the application at runtime.
While not ideal disabling this single step is much better than disabling
linking for the whole application.
A better approach is described in https://github.com/xamarin/xamarin-macios/issues/6048
but this configuration optimization makes sense independently of it.
Fix https://github.com/xamarin/xamarin-macios/issues/3655
The arm64_32 slice for watchOS apps will always use the 'unified' mode, while
the armv7k can be both 'unified' and 'compat' depending on the deployment
target, so we need to keep track of this per Target.
This PR does not change anything related to arm64_32, that will come in a
later PR.
The arm64_32 slice for watchOS apps will always use the 'unified' mode, while
the armv7k can be both 'unified' and 'compat' depending on the deployment
target, so we need to keep track of this per Target.
This PR does not change anything related to arm64_32, that will come in a
later PR.
* [mtouch/mmp] Split out the RunCommand[Async] methods to a separate file so that the generator can reuse more easily.
* [generator] Show proper errors when failing to compile something.
* Fix grammar
Some code now need to be initialized a few lines earlier... otherwise we
end up with an error like:
```
/Library/Frameworks/Xamarin.Mac.framework/Versions/Current/bin/mmp --version
error MM0000: Unexpected error - Please file a bug report at https://github.com/xamarin/xamarin-macios/issues/new
System.InvalidOperationException: Nullable object must have a value.
at System.Nullable`1[T].get_Value () [0x0000d] in /Users/builder/jenkins/workspace/build-package-osx-mono/2019-02/external/bockbuild/builds/mono-x64/external/corefx/src/Common/src/CoreLib/System/Nullable.cs:48
at Xamarin.Bundler.Driver.get_TargetFramework () [0x00001] in /Users/poupou/git/xamarin/xamarin-macios/tools/common/Driver.cs:198
at Xamarin.Bundler.Application.get_Platform () [0x00001] in /Users/poupou/git/xamarin/xamarin-macios/tools/common/Application.cs:62
at Xamarin.Bundler.RuntimeOptions.ParseHttpMessageHandler (Xamarin.Bundler.Application app, System.String value) [0x0002f] in /Users/poupou/git/xamarin/xamarin-macios/src/ObjCRuntime/RuntimeOptions.cs:43
at Xamarin.Bundler.RuntimeOptions.Create (Xamarin.Bundler.Application app, System.String http_message_handler, System.String tls_provider) [0x00007] in /Users/poupou/git/xamarin/xamarin-macios/src/ObjCRuntime/RuntimeOptions.cs:34
at Xamarin.Bundler.Driver.Main2 (System.String[] args) [0x00a78] in /Users/poupou/git/xamarin/xamarin-macios/tools/mmp/driver.cs:377
at Xamarin.Bundler.Driver.Main (System.String[] args) [0x00015] in /Users/poupou/git/xamarin/xamarin-macios/tools/mmp/driver.cs:211
```
* [registrar] Make a copy of the static registrar for Xamarin.Mac/Classic.
Make a copy of the static registrar for Xamarin.Mac/Classic, one which is
compatible with the binary artifacts we ship for Xamarin.Mac/Classic
(libxammac, XamMac.dll).
This way the static registrar can evolve in the future, without breaking
Xamarin.Mac/Classic.
* [runtime] Make a copy of the runtime headers too.
* Update comment.
* [mmp] Delay creating a Target instance until we know if we're a Classic or Unified app.
Otherwise the wrong static registrar might be created.
- A long while ago, this hack was added to mmp:
// Shutup the warning until we decide on bug: 36478
if (shortendName.ToLowerInvariant () == "intl" && IsUnifiedFullXamMacFramework)
- This breaks use cases were we explicitly ask for that file, so let's
fix that for now until we can fix the root cause for real
* We only need to do a runtime check on watchOS.
* On watchOS assume we're on a ARM64-based CPU as long as we're not on a
ARMv7k CPU.
Fixes an issue where we failed to detect a 64-bit iOS CPU as ARM64-based (in
particular iPhone X's ARM64v8).
We need our 32-bit and 64-bit assemblies to be identical so that we can avoid
duplicating the .dll in fat apps.
One difference used to be that the .dll contained the full path to the
corresponding .pdb ([1]), but we changed cecil to only write the filename
([2]). Unfortunately this change breaks something else, so it has to be
reverted ([3]).
This implements a different solution: we provide a custom symbol writer to
Cecil, which only writes the filename of the pdb in the .dll, not the full
path.
[1]: https://bugzilla.xamarin.com/show_bug.cgi?id=54578
[2]: https://github.com/jbevain/cecil/issues/372
[3]: https://github.com/jbevain/cecil/pull/554
(cherry picked from commit 53874c863996656eaba43a5582731b93eb6f53b7)
# Conflicts:
# tools/mtouch/mtouch.csproj
* Add a Runtime.IsARM64CallingConvention property.
Determining whether we should use the ARM64 calling convention in P/Invokes
gets more complicated with ARM64_32 (which for our purposes is a 32-bit
architecture).
So add a property on the Runtime class to avoid code duplication, and teach
the linker to optimize any calls to this property to a constant value whenever
possible (and the method is marked as optimizable).
Also change our code to use this new property, and make the corresponding
methods optimizable.
Some shuffling in mmp was required, which meant a little bit more code is now
shared between mtouch and mmp.
* Coding style.
* Test tweaks.
* Improve comment.
* Document new optimization
* Move ILReader to shared linker test code location.
* Disable inlining on armv7k.
* Change IsARM64CallingConvention to a read-only field.
We can give the AOT compiler a constant value for a read-only field, so that
the AOT compiler optimizes away the call to the field by using the constant
value.
This commit does not implement this change for the AOT compiler, but using a
read-only field makes it easy to implement it in the future.
* [linker] Remove non-bitcode compatible code, and show a warning.
Remove code not currently compatible with bitcode and replace it with an
exception instead (otherwise we'll assert at runtime).
Also show a warning when we detect this.
This is quite helpful when looking at watch device test runs to filter out
failures we already know about.
This fixes point #2 in #4763.
* Improve documentation.
* Simplify linker code by using a substep.
* Fix whitespace issues.
* Improve reporting.
* Add support for reporting more than one MT2105 at the same time when making
the errors instead of warnings.
* Only report MT2105 for methods that haven't been linked away.
* Format the error message nicer for properties.
* Tweak a bit for warning tests to pass.
* Use ExceptionalSubStep to provide better error information.
* Adjust where linker warnings/errors are reported from to avoid a NullReferenceException.
- Existing binding projects embed the native libraries within the assembly as managed resource
- This does not scale well and has performance implications
- This PR creates a new property, NoBindingEmbedding which when true processes the building and consumption of binding projects differently.
- Existing binding projects are not affected, they will continue as is
- I've written a full XM test suite and ported a subset to iOS. Since iOS only supports checked in projects, and I didn't want to make the existing situation worse by adding more, I only wrote tests that could use the existing test projects.
-When we complete some form of msbuild testing reform, we'll revisit these tests.
- Remove two files in MyiOSFrameworkBinding that are not used (we use copies elsewhere)
- Remove unnecessary sleep and fix broken touch command
- Output failing test log to console instead of test output
- VSfM does not handle thousands of lines of test failure message well
- Add ability to generate binding projects with LinkWith
- https://github.com/xamarin/xamarin-macios/issues/4435
- A common enough breakage in our handling of native references is if you have
two native libraries with dependencies (with rpath) between them that get copied into MonoBundle
- We did not add rpath to this location so we would not resolve them
- This is a behavior change, as anything that touches library resolution in mmp, but should be safe enough
- Add 2 ignore line for common swift libraries
This makes it possible to build mmp (the partial static registrar code) with
the wrong system Xcode (which is not supported, but that doesn't mean we can't
try to make it mostly work to ease our lives).
I tried this in the xcode9 branch (PR #2588), and it didn't stick after the
xcode9 branch was merged to master.
I tried again a year later with the xcode10 branch (PR #4691), and once again
the commit didn't stick after the xcode10 branch was merged to master.
So now I'm trying to get this directly into master instead.
Let's see if it's still there when we branch for xcode11 next year...
Share all the code to find and verify Xcode between mtouch and mmp.
Also print out the actual product version when logging which Xcode was used
(to make it easier to detect if a beta version is in use).
- https://github.com/xamarin/xamarin-macios/pull/4980 and the mono branch merge both added it
- However both copies were not the same, one was conditional and one added an extra -u option
- This collapses them into one check
* Bump to mono:2018-06
* Bump mono
* Updates compression to work with the public span
* Bump mono
* Fixes pointer check logic in Deflater
* Bump mono
* Fixes pointer check logic in Deflater
* Bump mono
* Bump Mono
* [runtime] always use `mono_jit_set_aot_mode` (#4491)
`mono_jit_set_aot_only` is deprecated and accidentally broke with
https://github.com/mono/mono/pull/7887
This should fix device tests with `mono-2018-06`
* Testing with Zoltan's patch
* Include libmono-system-native on Xamarin.Mac
* Bump Mono
Commit list for mono/mono:
* mono/mono@7bcda192a0 Bump llvm to release_60/fc854b8ec5873d294b80afa3e6cf6a88c5c48886. (#9786). (#9804)
* mono/mono@23e95ec7ad Apply F# portable pdb debug fix for pinvokes & bump (#9797)
* mono/mono@295f6d32af [2018-06] [MacOS] On Mac, use the copyfile API to copy files (#9696)
Diff: 7d5f4b6136...7bcda192a0
* Revert 4bacab3d5c, it doesn't fix the ios aot problems.
* Bump mono
* [tests] Adjust the MT0137 test for mcs change in behavior.
Starting with mono 5.16 mcs will now add assembly references when the assembly
is only used in attributes (this was already the case for csc in both 5.14 and
5.16, so it seems to be a compatibility change).
Adjust the MT0137 test accordingly.
* [msbuild] Fix parsing of json parser errors to handle trailing periods in the error message.
Fixes this test:
1) Test Failure : Xamarin.iOS.Tasks.Bug60536.TestACToolTaskCatchesJsonException
ColumnNumber
Expected: 2
But was: 0
* Bump mono
* [builds] Install the old llvm binaries into the LLVM36 directory and make the 32 bit builds use that.
* Bump mono
* Bump mono
* [jenkins] Don't give VSTS a fake branch. (#4667)
Something in VSTS changed, and now fake branch names don't work anymore.
So instead use real branch names (and for pull requests I've created a
'pull-request' branch we can use).
* Assembly.LoadFile accepts only absolute path
* [linker] Add new Facade (System.Threading.Tasks.Extensions).
Fixes these MTouch test failures:
1. Xamarin.Linker.SdkTest.iOS_Unified : Facades
Expected:
But was: < "System.Threading.Tasks.Extensions" >
2. Xamarin.Linker.SdkTest.tvOS : Facades
Expected:
But was: < "System.Threading.Tasks.Extensions" >
3. Xamarin.Linker.SdkTest.watchOS : Facades
Expected:
But was: < "System.Threading.Tasks.Extensions" >
* [mono-sdks] Necessary changes to unify the LLVM provisioning for both iOS and Android. (#4732)
* Bump Mono
* [mtouch] add mixed-mode support (#4751)
* [mtouch] add --interp-mixed option
When enabling this option, mtouch will AOT compile `mscorlib.dll`. At
runtime that means every method that wasn't AOT'd will be executed by
the runtime interpreter.
* [mtouch] Add support to --interpreter to list the assemblies to (not) interpret.
* [msbuild] Simplify interpreter code to use a single variable.
* Fix whitespace.
* [mtouch] Move mtouch-specific code to mtouch-specific file.
* [msbuild] An empty string is a valid value for 'Interpreter', so make it a non-required property.
* [mtouch] Add sanity check for aot-compiling interpreted assemblies.
* Bump Mono
* [linker] Updates SDKs facades list
* Bump mono
* [msbuild] Adds facades which might override default nuget version to framework list
The collision resolver task reads them from here https://github.com/dotnet/sdk/blob/master/src/Tasks/Common/ConflictResolution/FrameworkListReader.cs
* Bump to a VSfM version that can build XM Classic projects.
* Store the minimum mono version for Xamarin.Mac in one place only (Make.config) and bump it to 5.14. Fixes#4120.
I've verified that we fail at launch of running on 5.12, while 5.14 works fine
(to launch at least), so the minimum system mono version is _at least_ 5.14.
Fixes https://github.com/xamarin/xamarin-macios/issues/4120.
* [mmp] Load mono's version file instead of using pkg-config to get mono's version.
pkg-config will only get three parts of the version, while the version file
has all four parts.
This is important, since we're now verifying the four parts of the version
file, and without loading those four from the system, we'll fail builds like
this:
error MM0001: This version of Xamarin.Mac requires Mono 5.14.0.136 (the current Mono version is 5.14.0).
because the three part version's fourth number is assumed to be 0.
* Only verify mono runtime version when running with system/dynamic mono.
There should be no need to verify the mono runtime version when embedding mono:
* If it's a mono we're shipping, something very bad happened in our
build/package for it to be an invalid mono.
* If it's a system mono that's being embedded, then we verify in mmp at build
time.
In the first scenario (a mono we're shipping), the problem is that the mono
we've built does not report back the full version number (with four parts) [1],
which means we'll fail any check whose requirements are identical for the
first three parts, and non-zero for the last.
[1] The fourth part of the version number is created/calculated when packaging
mono, and we're not packaging it.
This makes it possible to build mmp (the partial static registrar code) with
the wrong system Xcode (which is not supported, but that doesn't mean we can't
try to make it mostly work to ease our lives).
* Make sure mmp.csproj builds using the same compiler arguments as the makefile used.
* Clean up mmp.csproj by removing stuff that was left over from when it was a Xamarin.Mac project.
* Build mmp.exe using msbuild in the makefile, and clean up the resulting unused make logic.
Partial fix for https://github.com/xamarin/xamarin-macios/issues/4384.
* Make sure mmp.csproj builds using the same compiler arguments as the makefile used.
* Clean up mmp.csproj by removing stuff that was left over from when it was a Xamarin.Mac project.
* Build mmp.exe using msbuild in the makefile, and clean up the resulting unused make logic.
Partial fix for https://github.com/xamarin/xamarin-macios/issues/4384.
* [jenkins] Only XM apps with variations are Classic/32-bit apps, so adjust ignore logic accordingly. Fixes maccore issue 884.
Fixes https://github.com/xamarin/maccore/issues/884.
* [mmp] Fix passing -stdlib=libc++ to clang.
* [tests] Fix 32-bit XM issues.
* [xharness] Add support for building 32-bit XM apps by using Xcode 9.4.
* [xharness] Since xharness can now build 32-bit mac apps, enable them by default.
* Remove debug code.
* Remove unused variable.
Fixes:
xamarin-macios/external/mono/external/linker/linker/Linker.Steps/MarkStep.cs(310,60,310,73): error CS0117: 'Array' does not contain a definition for 'Empty'
* Share the stopwatch code between `mtouch` and `mmp`;
* Add more details on linker steps. Sadly substeps are executed on the
metadata so they can't be reported individually;
* Add a few places where timestamps where missing to get better precision
on the linking part;
The --linker-optimize option is an early version of the current --optimize
option, and apparently I forgot to update everything when the option changed
name.
* Remove more usage of mcs across the build and tests
* Fix -o[ut] mcs/csc argument difference
* Fix OpenTK.[dll.mdb|pdb]
* Complete some MCS|CSC renames
* Fix SYSTEM_CSC not to have a default option since it's not usable that way in every case (and most of them already deal with that option)
* Do not rename a variable used by mono itself
* Un-renamed two other variables
* Fix copying pdb
* Generate debug symbols for *.BindingAttributes.dll and copy .mdb for the old XamMac binary version
* Newer csc-compiled XamMac.BindingAttributes.dll have .pdb while the old, mcs-compiled binary cached, version has a .mdb
* Fix msc -> mcs typo.
* [MMP] Revert recursive search dirs changes
* [MMP] Allow resolving assemblies to the ones passed in command line args
This is what actually makes the MonoMacResolver actually resolve to
assemblies given as arguments.
This mirrors the behaviour of Pack, which is called on the other
code-path (that's not --runregistrar)
3113c5d2b5/tools/mmp/driver.cs (L513)
* [static registrar] Optimize creation of delegates for blocks.
Optimize creation of delegates for blocks so that it doesn't require the
dynamic registrar.
This is done by getting the metadata token for the Create method that creates
the delegate, and embed that metadata token in the generated code from the
static registrar.
Also add tests, since this scenario was not covered by tests already.
* [mmptest] Fix test after recent changes.
* [test-libraries] Avoid duplicate symbols.
* [tests] Update according to changes.
* [MMP] Revert recursive search dirs changes
* [MMP] Allow resolving assemblies to the ones passed in command line args
This is what actually makes the MonoMacResolver actually resolve to
assemblies given as arguments.
This mirrors the behaviour of Pack, which is called on the other
code-path (that's not --runregistrar)
3113c5d2b5/tools/mmp/driver.cs (L513)
- https://github.com/xamarin/xamarin-macios/issues/3367
- App Store will now fail builds if you add in a 32-bit dylib
- If you are a 32-bit app you don't need the 64-bit part of your fat
dylib anyway
- Add --optimize=-trim-architectures to allow customization of behavior, as not everyone
uses app store
In addition, while writing tests for this is was noticed that mmp tests did not "really" run Release configuration correctly in most cases. Fixing this turned out to be a bit of a pain, but necessary to correctly test this (and other things).
- Turns out that /p:configuration:debug is not sufficient to tell mmp to
do the right thing
- That, in most projects, sets the DebugSymbols property, which really
is what is checked.
- However, two of our projects did not have that, so we always did
release mmp work.
- Removed configuration property for tests and added real "Release"
configuration option
* [static registrar] Optimize creation of delegates for blocks.
Optimize creation of delegates for blocks so that it doesn't require the
dynamic registrar.
This is done by getting the metadata token for the Create method that creates
the delegate, and embed that metadata token in the generated code from the
static registrar.
Also add tests, since this scenario was not covered by tests already.
* [mmptest] Fix test after recent changes.
* [test-libraries] Avoid duplicate symbols.
* [tests] Update according to changes.
- https://github.com/xamarin/xamarin-macios/issues/3367
- App Store will now fail builds if you add in a 32-bit dylib
- If you are a 32-bit app you don't need the 64-bit part of your fat
dylib anyway
- Add --optimize=-trim-architectures to allow customization of behavior, as not everyone
uses app store
In addition, while writing tests for this is was noticed that mmp tests did not "really" run Release configuration correctly in most cases. Fixing this turned out to be a bit of a pain, but necessary to correctly test this (and other things).
- Turns out that /p:configuration:debug is not sufficient to tell mmp to
do the right thing
- That, in most projects, sets the DebugSymbols property, which really
is what is checked.
- However, two of our projects did not have that, so we always did
release mmp work.
- Removed configuration property for tests and added real "Release"
configuration option
* [tests] Improve debug spew for the RebuildTest_WithExtensions test.
* [mtouch/mmp] Store/load if the dynamic registrar is removed or not into the cached link results.
Store/load if the dynamic registrar is removed or not into the cached link
results, so that we generate the correct main.m even if cached linker results
are used.
* [mtouch/mmp] The static registrar must not execute if we're loading cached results from the linker.
The static registrar must not execute if we're loading cached results from the
linker, because the static registrar needs information from the linker that's
not restored from the cache.
* [mtouch/mmp] Share Touch code.
* [mtouch/mmp] Make it possible to touch inexistent files (to create them).
* [mtouch/mmp] Fix tracking of whether the static registrar should run again or not.
The recent changes to support optimizing away the dynamic registrar caused the
Xamarin.MTouch.RebuildTest_WithExtensions test to regress.
The problem
-----------
* The linker now collects and stores information the static registrar needs.
* This information is not restored from disk when the linker realizes that it
can reload previously linked assemblies instead of executing again.
* The static registrar runs again (for another reason).
* The information the static registrar needs isn't available, and incorrect
output follows.
So fix 1: show an error if the static registrar runs when the linker loaded
cached results.
The exact scenario the test ran into is this:
* 1st build: everything is new and everything is built.
* 2nd build: contents of .exe changes, the linker runs again, the static
registrar runs again, but sees that the generated output didn't change, so
it doesn't write the new content to disk (this is an optimization to avoid
compiling the registrar.m file again unless needed).
* 3rd build: only the .exe timestamp changes, the linker sees nothing changes
in the contents of the .exe and loads the previously linked assemblies from
disk, the static registrar sees that the .exe's timestamp is newer than
registrar.m's timestamp and run again, but doesn't produce the right result
because it doesn't have the information it needs.
Considered solutions
--------------------
1. Only track timestamps, not file contents. This is not ideal, since it will
result in more work done: in particular for the case above, it would add a
registrar.m compilation in build #2, and linker rerun + static registrar
rerun + registrar.m compilation + final native link in build #3.
2. Always write the output of the static registrar, even if it hasn't changed.
This is not ideal either, since it will also result in more work done: for
the case above, it would add a registrar.m compilation + final native link
in build #3.
3. Always write the output of the static registrar, but track if it changed or
not, and if it didn't, just touch registrar.o instead of recompiling it.
This only means the final native link in build #3 is added (see #5 for why
this is worse than it sounds).
4. Always write the output of the static registrar, but track it it changed or
not, and if it didn't, just touch registrar.o instead of recompiling it,
and track that too, so that the final native link in build #3 isn't needed
anymore. Unfortunately this may result in incorrect behavior, because now
the msbuild tasks will detect that the executable has changed, and may run
dsymutil + strip again. The executable didn't actually change, which means
it would be the previously stripped executable, and thus we'd end up with
an empty .dSYM because we ran dsymtil on an already stripped executable.
5. Idea #4, but write the output of the final link into a temporary directory
instead of the .app, so that we could track whether we should update the
executable in the .app or not. This is not optimal either, because
executables can be *big* (I've seen multi-GB tvOS bitcode executables), and
extra copies of such files should not be taken lightly.
6. Idea #4, but tell the MSBuild tasks that dsymutil/strip doesn't need to be
rerun even if the timestamp of the executable changed. This might actually
work, but now the solution's become quite complex.
Implemented solution
--------------------
Use stamp files to detect whether a file is up-to-date or not.
In particular:
* When we don't write to a file because the new contents are identical to the
old contents, we now touch a .stamp file. This stamp file means "the
accompanying file was determined to be up-to-date when the stamp was
touched."
* When checking whether a file is up-to-date, also check for the presence of a
.stamp file, and if it exists, use the highest timestamp between the stamp
file and the actual file.
Now the test scenario becomes:
* 1st build: everything is new and everything is built.
* 2nd build: contents of .exe changes, the linker runs again, the static
registrar runs again, but sees that the generated output didn't change, so
it doesn't write the new content to disk, but it creates a registrar.m.stamp
file to indicate the point in time when registrar.m was considered up-to-
date.
* 3rd build: only the .exe timestamp changes, the linker sees nothing changes
in the contents of the .exe and loads the previously linked assemblies from
disk, the static registrar sees that the .exe's timestamp is *older* than
registrar.m.stamp's timestamp and doesn't run again.
We only use the stamp file for source code (registrar.[m|h], main.[m|h],
pinvokes.[m|h]), since using it every time has too much potential for running
into other problems (for instance we should never create .stamp files inside
the .app).
Fixes these test failures:
1) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("single","",False,System.String[])
single
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory371/testApp.app/testApp is modified, timestamp: 2/15/2018 3:04:11 PM > 2/15/2018 3:04:09 PM" >
2) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("dual","armv7,arm64",False,System.String[])
dual
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory375/testApp.app/testApp is modified, timestamp: 2/15/2018 3:06:03 PM > 2/15/2018 3:06:00 PM" >
3) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("llvm","armv7+llvm",False,System.String[])
llvm
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory379/testApp.app/testApp is modified, timestamp: 2/15/2018 3:07:14 PM > 2/15/2018 3:07:12 PM" >
4) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("debug","",True,System.String[])
debug
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory383/testApp.app/testApp is modified, timestamp: 2/15/2018 3:08:16 PM > 2/15/2018 3:08:13 PM" >
5) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("single-framework","",False,System.String[])
single-framework
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory387/testApp.app/testApp is modified, timestamp: 2/15/2018 3:09:18 PM > 2/15/2018 3:09:16 PM" >
Fixes https://github.com/xamarin/maccore/issues/641
* [tests] Improve debug spew for the RebuildTest_WithExtensions test.
* [mtouch/mmp] Store/load if the dynamic registrar is removed or not into the cached link results.
Store/load if the dynamic registrar is removed or not into the cached link
results, so that we generate the correct main.m even if cached linker results
are used.
* [mtouch/mmp] The static registrar must not execute if we're loading cached results from the linker.
The static registrar must not execute if we're loading cached results from the
linker, because the static registrar needs information from the linker that's
not restored from the cache.
* [mtouch/mmp] Share Touch code.
* [mtouch/mmp] Make it possible to touch inexistent files (to create them).
* [mtouch/mmp] Fix tracking of whether the static registrar should run again or not.
The recent changes to support optimizing away the dynamic registrar caused the
Xamarin.MTouch.RebuildTest_WithExtensions test to regress.
The problem
-----------
* The linker now collects and stores information the static registrar needs.
* This information is not restored from disk when the linker realizes that it
can reload previously linked assemblies instead of executing again.
* The static registrar runs again (for another reason).
* The information the static registrar needs isn't available, and incorrect
output follows.
So fix 1: show an error if the static registrar runs when the linker loaded
cached results.
The exact scenario the test ran into is this:
* 1st build: everything is new and everything is built.
* 2nd build: contents of .exe changes, the linker runs again, the static
registrar runs again, but sees that the generated output didn't change, so
it doesn't write the new content to disk (this is an optimization to avoid
compiling the registrar.m file again unless needed).
* 3rd build: only the .exe timestamp changes, the linker sees nothing changes
in the contents of the .exe and loads the previously linked assemblies from
disk, the static registrar sees that the .exe's timestamp is newer than
registrar.m's timestamp and run again, but doesn't produce the right result
because it doesn't have the information it needs.
Considered solutions
--------------------
1. Only track timestamps, not file contents. This is not ideal, since it will
result in more work done: in particular for the case above, it would add a
registrar.m compilation in build #2, and linker rerun + static registrar
rerun + registrar.m compilation + final native link in build #3.
2. Always write the output of the static registrar, even if it hasn't changed.
This is not ideal either, since it will also result in more work done: for
the case above, it would add a registrar.m compilation + final native link
in build #3.
3. Always write the output of the static registrar, but track if it changed or
not, and if it didn't, just touch registrar.o instead of recompiling it.
This only means the final native link in build #3 is added (see #5 for why
this is worse than it sounds).
4. Always write the output of the static registrar, but track it it changed or
not, and if it didn't, just touch registrar.o instead of recompiling it,
and track that too, so that the final native link in build #3 isn't needed
anymore. Unfortunately this may result in incorrect behavior, because now
the msbuild tasks will detect that the executable has changed, and may run
dsymutil + strip again. The executable didn't actually change, which means
it would be the previously stripped executable, and thus we'd end up with
an empty .dSYM because we ran dsymtil on an already stripped executable.
5. Idea #4, but write the output of the final link into a temporary directory
instead of the .app, so that we could track whether we should update the
executable in the .app or not. This is not optimal either, because
executables can be *big* (I've seen multi-GB tvOS bitcode executables), and
extra copies of such files should not be taken lightly.
6. Idea #4, but tell the MSBuild tasks that dsymutil/strip doesn't need to be
rerun even if the timestamp of the executable changed. This might actually
work, but now the solution's become quite complex.
Implemented solution
--------------------
Use stamp files to detect whether a file is up-to-date or not.
In particular:
* When we don't write to a file because the new contents are identical to the
old contents, we now touch a .stamp file. This stamp file means "the
accompanying file was determined to be up-to-date when the stamp was
touched."
* When checking whether a file is up-to-date, also check for the presence of a
.stamp file, and if it exists, use the highest timestamp between the stamp
file and the actual file.
Now the test scenario becomes:
* 1st build: everything is new and everything is built.
* 2nd build: contents of .exe changes, the linker runs again, the static
registrar runs again, but sees that the generated output didn't change, so
it doesn't write the new content to disk, but it creates a registrar.m.stamp
file to indicate the point in time when registrar.m was considered up-to-
date.
* 3rd build: only the .exe timestamp changes, the linker sees nothing changes
in the contents of the .exe and loads the previously linked assemblies from
disk, the static registrar sees that the .exe's timestamp is *older* than
registrar.m.stamp's timestamp and doesn't run again.
We only use the stamp file for source code (registrar.[m|h], main.[m|h],
pinvokes.[m|h]), since using it every time has too much potential for running
into other problems (for instance we should never create .stamp files inside
the .app).
Fixes these test failures:
1) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("single","",False,System.String[])
single
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory371/testApp.app/testApp is modified, timestamp: 2/15/2018 3:04:11 PM > 2/15/2018 3:04:09 PM" >
2) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("dual","armv7,arm64",False,System.String[])
dual
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory375/testApp.app/testApp is modified, timestamp: 2/15/2018 3:06:03 PM > 2/15/2018 3:06:00 PM" >
3) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("llvm","armv7+llvm",False,System.String[])
llvm
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory379/testApp.app/testApp is modified, timestamp: 2/15/2018 3:07:14 PM > 2/15/2018 3:07:12 PM" >
4) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("debug","",True,System.String[])
debug
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory383/testApp.app/testApp is modified, timestamp: 2/15/2018 3:08:16 PM > 2/15/2018 3:08:13 PM" >
5) Failed : Xamarin.MTouch.RebuildTest_WithExtensions("single-framework","",False,System.String[])
single-framework
Expected: <empty>
But was: < "/Users/builder/data/lanes/5746/4123bf7e/source/xamarin-macios/tests/mtouch/bin/Debug/tmp-test-dir/Xamarin.Tests.BundlerTool.CreateTemporaryDirectory387/testApp.app/testApp is modified, timestamp: 2/15/2018 3:09:18 PM > 2/15/2018 3:09:16 PM" >
Fixes https://github.com/xamarin/maccore/issues/641
Add a 'register-protocols' optimization that:
Improves static registrar to:
* Generate a new table of protocol -> managed wrapper type. This is required
to find the wrapper type without having the `[Protocol]` attribute around.
* Make the generated code implement protocols from [Adopts] attributes. This
makes it possible to link away the `[Protocol]` attribute, because the
native implementation of `conformsToProtocol:` does the right thing (we
might even be able to link away our complete `ConformsToProtocol` logic when
we remove the dynamic registrar).
Improves linker to:
* Not mark protocol interfaces by the mere virtue of having a type that
implements them. This is implemented by not marking protocol interfaces when
they're implementing a class, but instead when a method implementation is
found to implement a method from a protocol interface.
* Mark the wrapper type for protocols (this allows us to remove the Protocol
attribute, since that's the link between the protocol and its wrapper type).
* Remove the [Protocol], [ProtocolMember] and [Adopts] attributes (but only if
optimizing protocols).
The static registrar still needs some of the information linked away, so a few
changes are required to make it available post linker.
Benchmark
---------
I've compared the size of entire apps built for device:
|test | Before | After | Diff | % |
|:-----------------------------|-------:|-------:|-------:|------:|
|[monotouch-test/Debug][1] | 101mb | 100mb | -888kb | -0.9% |
|[monotouch-test/Release][2] | 99.2mb | 95.4mb | -830kb | -0.9% |
|[minimalistic app/Debug][3] | 10.8mb | 10.4mb | -443kb | -4.1% |
|[minimalistic app/Release][4] | 4.7mb | 4.55mb | -157kb | -3.3% |
[1]: https://gist.github.com/rolfbjarne/0181ab8abe436c34cf4ee68ecfb8cd18#monotouch-test-debug
[2]: https://gist.github.com/rolfbjarne/0181ab8abe436c34cf4ee68ecfb8cd18#monotouch-test-release
[3]: https://gist.github.com/rolfbjarne/0181ab8abe436c34cf4ee68ecfb8cd18#minimal-xi-app-debug
[4]: https://gist.github.com/rolfbjarne/0181ab8abe436c34cf4ee68ecfb8cd18#minimal-xi-app-release
There's only one static registrar now, so there's no need for code to select
which one, just create the one and only.
Also unify this code between mtouch and mmp.
You were the preprocessor we wished C# had natively
Removing PMCS requires these changes:
* Remove XamCore from src/
* Remove XamCore from tools/
* Remove XamCore from runtime/
* nint/nuint enum conversion
* _compat_ enum conversion
* NSAction conversion
* Hand fix single API incorrectly converted by PMCS to unbreak compatibility
- Due to a bug in PMCS, the nuint was incorrectly converted in this API.
- However, as that ship as sailed, we must "fix" it until XAMCORE_4_0
* Update readme
* Bump macios-binaries
* [ObjCRuntime] Add a BindingImplAttribute.
* [linker] Make ProviderToString an extension method on ICustomAttributeProvider to make it more discoverable.
* [generator] Use [BindingImpl] instead of [CompilerGenerated].
The entire diff is big (89MB), so it can't be gisted. However, most of it is
either removal of `using System.Runtime.CompilerServices;` or the change from
`[CompilerGenerated]` to `[BindingImpl (...)]` like this:
https://gist.github.com/rolfbjarne/8bfda3ed37b956d0342a1c1e9b079244
If I remove those parts of the diff, there's nothing significant left:
https://gist.github.com/rolfbjarne/4156164d6bdb1376366200394eb8a091
* [linker] Teach the linker about the new [BindingImpl] attribute.
In addition to the existing logic where the linker would optimize some
[CompilerGenerated] code (sometimes with additional requirements), it will now
also optimize all [BindingImpl (Optimizable)] code (without any additional
requirements).
* [tests] Add tests to make sure [BindingImpl (Optimizable)] works as expected.
* [linker] Check for [BindingImpl] before [CompilerGenerated] and stop checking for [CompilerGenerated] in XAMCORE_4_0.
Check for [BindingImpl] before checking for [CompilerGenerated], since the
former is more common.
Also stop checking for [CompilerGenerated] (at least to mean that code is
optimizable) in our next non-compatible evolutionary leap (XAMCORE_4_0):
* [introspection] Impl a better typo check.
* [mtouch/mmp] Give users more control over optimizations, and share more code between mtouch and mmp.
1. Add an --optimize flag to mtouch/mmp that allows users to select which
optimizations to apply (or not). This makes it easier to add future
optimizations, and allow users to disable any optimization that causes
problems without having to disable many other features.
2. Share as much optimization code as possible between mtouch and mmp. This
immediately gives a benefit to mmp, which has three new optimizations only
mtouch had: NSObject.IsDirectBinding inlining, IntPtr.Size inlining and
dead code elimination.
This results in ~6kb of disk space saved for a linked Xamarin.Mac app:
* link sdk: [Debug][1], [Release][2]
* link all: [Debug][3], [Release][4]
Testing also verifies that monotouchtest ([Debug][5], [Release][6]) has not
changed size at all, which means that no default optimizations have changed
inadvertedly.
[1]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#link-sdk-mac--debug
[2]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#link-sdk-mac--release
[3]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#link-all-mac--debug
[4]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#link-all-mac--release
[5]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#monotouchtest-iphonedebug64
[6]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#monotouchtest-iphonerelease64
* [tools] Don't enable the IsDirectBinding optimization by default for Xamarin.Mac apps, it's not safe.
* Fix whitespace issues.
* [doc] Document optimizations.
* Officially support optimizations by adding them to the Versions.plist.
* [linker] Improve IntPtr.Size inliner + dead code eliminatior and add tests.
* Properly handle operands for the ldc_i4_s instruction (they're sbyte).
* Fix less-than condition to actually do a less-than comparison.
* Make sure to look up the bitness in the Target, not the Application, since
the Application's value will be incorrect when building fat apps (both
Is32Build and Is64Build will be true).
* Remove unnecessary checks for the IntPtr.Size inliner: this optimization
does not depend on other instructions than the IntPtr.get_Size call, so
remove the checks that verify surrounding instructions. This makes the
IntPtr.Size inliner kick in in more scenarios (such as the new tests).
* Add tests.
* [tests] Add mmp tests for optimizations.
* [tests] Fix XM optimization tests.
* [tests] Fix test build error.
* [runtime] Remove specialized function for getting the Selector/Class handle of a managed Selector/Class instance.
The existing function to get the handle of an INativeObject works just as fine.
* [runtime] Store and use a prebuilt XamMacLauncher.
Some changes in the runtime needs corresponding changes in XamMac.dll, but
since we're not changing XamMac.dll anymore, we can't change the runtime
either.
This means that we must add XamMacLauncher to the list of binaries we copy.
* [runtime] Store and use a prebuilt libxammac*.a as well.
* [mtouch][mmp] Report invalid debug symbols files. Fixes#3200
Try to read the assembly with symbols and, if that fails, warn and
fallback to loading them without symbols.
This fixes cases were it's not easy to update or delete (e.g. nuget)
bad symbols files - so this cannot be an error without causing a lot
of pain.
However it needs to be reported, otherwise it wont be fixed (by the
publisher) and it can limit the debugability of the application and
the usefulness of the stacktraces.
Finally merge most of the resolver's code between mtouch and mmp so
we don't have to fix such issue twice anymore.
note: this needs to be slightly updated once we get a version of cecil
that can give us a more precise error message.
Also bring Rolf's tests from
https://github.com/xamarin/xamarin-macios/pull/3079
reference:
https://github.com/xamarin/xamarin-macios/issues/3200
* [MetalPerformanceShaders] Activate bindings for Xamarin.Mac and add n… (#2816)
* [MetalPerformaceShaders] Several MPSCnnKernel properties should be readonly (#2938)
The subclasses versions of the properties need Override, cannot be removed since it would break visibility for iOS 10
* Remove some [Model] attributes that sholdn't be needed
* Fix introspection test crashes
* More introspection fixes
* NN does not need to be PascalCased
Remove unneeded Models and BaseTypes
* PR Whitespace fixes and renamings
* Paste fail
* More fixes from PR comments
* [MPS] Adds new intro test, fixes ctors and xtro output
* Removes duplicated availability attributes.
* Removes obsoleted API from macOS since mps is new to it.
* Fixes xtro output.
* Adds missing API.
* Fixes parameterless ctors, some of them do not really work, found
by our new intro test and disabled the one that seem to not make
sense due to the presence of DesignatedInitializers.
* Fixes a selector typo.
* Adds new `ShouldNotExposeDefaultCtorTest` to intro.
ShouldNotExposeDefaultCtorTest
==============================
This test checks for types with a parameterless ctor that are subclasses
of `NSObject` and then cheks if the BaseType of said objects also expose
a parameterless ctor (all in .NET land), if this is not the case it reports
them and so they can manually audited. Also this test has the ability to
print alloc/init ObjC code by setting `genObjCTestCode` to `true` so you can
take this code into an Xcode project and easily tests the ctors.
It seems that xtro (sharpie) does not have a complete picture of when a ctor
must be exposed hence the hability to generate this code and manually test.
Right now this test is just enabled for MPS since it is the scope of this PR.
In the future it should be enabled for all other frameworks and the output be
manually audited.
* [MPS] Fixes premature collection possible in bindings (bug 59547) and implements feedback.
https://bugzilla.xamarin.com/show_bug.cgi?id=59547
* Fixes premature collection possible in bindings im MPSKernel.cs
* Fixes MPSImageHistogramTest from using deprecated API.
* Removes renamed selectors and typos from ApiSelectorTest and ApiTypoTest.
* [MPS] Reenable Copy API and DesignatedInitializer xtro feedback
* Implement more feedback
* More feedback
The parsing done by `System.Version` does not accept a major-only string,
e.g. providing "11" would throw an exception.
Since people generally refer version as iOS 11 (and not iOS 11.0) this
is, at best, a nuisance. Xcode toolchain accept "11" as a valid string.
The first part of message was updated to show both the option name and
the (user provided) value.
The 2nd part remain the text of the .net exception message, i.e. what
`Version.Parse` tells you when it validates the string. Seeing the input
value should make it more obvious for other, incorrect version strings.
reference:
https://bugzilla.xamarin.com/show_bug.cgi?id=60280
* [mtouch/mmp/bgen] Add support for response files.
This is the first part of the fix for #56501.
https://bugzilla.xamarin.com/show_bug.cgi?id=56501
* [tests] Make sure no single argument starting with a '@' is passed to mtouch unless it's a response file.
--assembly-build-target takes arguments starting with '@', for instance:
--assembly-build-target @all=framework
which does not work anymore, because that's interpreted as a response file
(mtouch tries to read the file '@all=framework', which obviously doesn't
exist).
The fix is simple, don't put a space between the two arguments:
--assembly-build-target=@all=framework
* Add --root-assembly to mtouch/mmp and make the MSBuild tasks use this new option.
This makes it possible to pass root assemblies starting with `@` to mtouch/mmp
without getting mistaken for response files.
* [msbuild] Always use the command-line option that takes an equals or colon.
Always use the command-line option that takes an equals or colon instead of a
space.
Do either of these:
--foo=something
--foo:something
instead of this:
--foo something
so that `something` can start with an at (`@`) sign without being mistaken for
a response file.
* [msbuild] Fix tests according to recent task changes.
* Update the function name used to initialize libmono-profiler-log, its called mono_profiler_init_log () now.
* [builds] Pass --with-cross-offsets= to crosstv's configure.
* Bump mono to 2017-08.
* Bump mono to 2017-08.
* Force disable 'futimens' and 'utimensat' so that we build with Xcode 9.
This is also needed to build with Xcode 8.3 on High Sierra.
* Remove old AppleTls implementation.
* Bump mono.
* Bump mono to 2017-08.
* Bump mono to 2017-08
* Reenable link-keep-resources-2 test
- This reverts commit 76b759ef22.
- 2017-08 has linker fix
* Bump mono to 2017-10
* Revert "Bump mono to 2017-10"
This reverts commit bb7832724e.
* Bump system mono to 2017-10
* Bump embedded mono to 2017-10
* [runtime] reflect eglib move
9be68f8952
* bump mono
* [btouch] remove Security.Tls usage from test
* [mtouch tests] update the function name used to initialize libmono-profiler-log, its called mono_profiler_init_log () now.
see
ea4e4a9ef6
fixes:
```
1) Failed : Xamarin.MTouch.Profiling(tvOS)
_mono_profiler_startup_log
Expected: collection containing "_mono_profiler_startup_log"
But was: < "_mono_profiler_init_log" >
at Xamarin.MTouch.Profiling (Xamarin.Profile profile) [0x00106] in <511889694a624cc9a50e0e9b259b05c5>:0
2) Failed : Xamarin.MTouch.Profiling(watchOS)
_mono_profiler_startup_log
Expected: collection containing "_mono_profiler_startup_log"
But was: < "_xamarin_get_block_descriptor", "_mono_profiler_init_log" >
at Xamarin.MTouch.Profiling (Xamarin.Profile profile) [0x00106] in <511889694a624cc9a50e0e9b259b05c5>:0
```
* [mmptest] update log profiler options.
826558a4af
deprecated the dash prefix for the mlpd path.
`noallocs` or `nocalls` are not needed, neither of them are default anymore.
* [mmptest] fix link-keep-resources-2 test to cope with more corlib resources.
another corlib resource (mscorlib.xml) was added:
https://github.com/mono/mono/commit/11e95169e787#diff-2d1c64decd91d9a6e8842ab0f0e9438d
* Revert "[mmptest] fix link-keep-resources-2 test to cope with more corlib resources."
This reverts commit 350eb3c174.
* [XHarness] Add the Mono.Data.Tds tests.
* Address comments from rolf in the review.
* [mmp regresssion tests] bump mono linker, so mscorlib.xml gets stripped
the test was failing in that way:
> Executing link-keep-resources-2...
> [FAIL] i18n 4/2 data files present: charinfo.nlp, collation.core.bin, collation.tailoring.bin, mscorlib.xml
also update the output, because it's actually expected at least three
elements.
fixes: https://bugzilla.xamarin.com/show_bug.cgi?id=59277
* bump mono
fixes crash in tvOS: https://github.com/mono/mono/pull/5812
* bump mono for updated BCL tests
see https://github.com/mono/mono/pull/5820
* [mono] set 2017-10 branch in .gitmodules
* [macos] Fix guiunit error on clean builds by depending on correct copy (#2912)
* [macos] Fix guiunit error on clean builds by depending on correct copy
- From a clean build making a BCL test would error due to the non-mobile guiunit not being built
- This was because the Makefile-mac.inc target was incorrect
- This was because xharness assumed that non variation based targets were always Modern
- However, BCL tests are Full, not Modern
* Code review change
* Swap to var to reduce diff
* Revert changes in the paths for GuiUnit.
* [XHarness] Add the System.IO.Compression bcl tests. (#2918)
* [XHarness] Add the System.IO.Compression bcl tests.
* [XHarness] Add bcl tests for System.IO.Compression.FileSystem. (#2924)
* [XHarness] Add the System.IO.Compression bcl tests.
* Ensure that resources are correctly copied in the bundles.
* [XHarness] Add bcl tests for System.IO.Compression.FileSystem.
* As per review, make the Mac test app name match the tests that are ran.
* [XHarness] Add Mono.CSharp tests on ios. (#2927)
* [XHarness] Add Mono.CSharp tests on ios.
* Bump mono to bring changes in the mono.csharp tests.
* [xtro-sharpie] fix TypeDefinition access due to Cecil change
* Bump mono
* bump mono
fixes
- https://bugzilla.xamarin.com/show_bug.cgi?id=60480
- https://bugzilla.xamarin.com/show_bug.cgi?id=60482
* bump mono
more fixes around conflicting paths when tests are run in parallel.
* Bump for mono/mono@2017-10
- https://bugzilla.xamarin.com/show_bug.cgi?id=60277
- Teach mmp and mtouch resolver to always ask for symbol reading from Cecil
- In most cases we explicitly load symbols (LoadReferencesStep) but when we don't rewritten assemblies don't match their pdb and we break debugging.
This avoids a problem where our code would store null because LinkContext
wasn't created yet when the static registrar instance was created.
This fixes the missing error from bug #59617.
https://bugzilla.xamarin.com/show_bug.cgi?id=59617
* [registrar] Remove useless interface.
* [registrar] Don't store LinkContext in the static registrar when in can be fetched from the Target. Partially fixes#59617.
This avoids a problem where our code would store null because LinkContext
wasn't created yet when the static registrar instance was created.
This fixes the missing error from bug #59617.
https://bugzilla.xamarin.com/show_bug.cgi?id=59617
* [registrar] Don't verify the SDK for protocol members. Partially fixes#59617.
It's not needed, because protocol members don't end up in the registrar output
anyway (and would thus not prevent the registrar code from compiling).
Classes that implement any protocol members would still run into the SDK
check, so this should not prevent real problematic code from being reported
either.
https://bugzilla.xamarin.com/show_bug.cgi?id=59617
* [tests][mtouch] Fix tests after registrar changes.
- https://bugzilla.xamarin.com/show_bug.cgi?id=59647
- There is no reasonable knob on the AOT process to not generate dSYM so delete after processing (these specific files are spawned only by/during AOT)
- AppStore complains if you ship bundles with dSYM fils present
- Fix mmp unit test stand alone execution (make run in tools/mmp uses different (faster) build system than full mmp tests)
--aot[=VALUE] Specify assemblies that should be AOT compiled
- none - No AOT (default)
- all - Every assembly in MonoBundle
- core - Xamarin.Mac, System, mscorlib
- sdk - Xamarin.Mac.dll and BCL assemblies
- |hybrid after option enables hybrid AOT which
allows IL stripping but is slower (only valid
for 'all')
- Individual files can be included for AOT via +
FileName.dll and excluded via -FileName.dll
Examples:
--aot:all,-MyAssembly.dll
--aot:core|hybrid,+MyOtherAssembly.dll,-
mscorlib.dll
--aot[=VALUE] Specify assemblies that should be AOT compiled
- none - No AOT (default)
- all - Every assembly in MonoBundle
- core - Xamarin.Mac, System, mscorlib
- sdk - Xamarin.Mac.dll and BCL assemblies
- |hybrid after option enables hybrid AOT which
allows IL stripping but is slower (only valid
for 'all')
- Individual files can be included for AOT via +
FileName.dll and excluded via -FileName.dll
Examples:
--aot:all,-MyAssembly.dll
--aot:core|hybrid,+MyOtherAssembly.dll,-
mscorlib.dll
Bug #59570 was a dupe of #58063 but was harder (than it should be) to
diagnose because the error did not point out which assembly had the
issue (requiring a whole, large, customer solution to confirm).
This adds a new MT2103 error which points to the assembly that could
not be read.
E.g. VSfM will now show
> Error MT2103: Error processing assembly 'Shim, Version=2.0.1.0, Culture=neutral, PublicKeyToken=c55ec16d10c4b366': System.NullReferenceException: Object reference not set to an instance of an object (MT2103) (...)
[1] https://bugzilla.xamarin.com/show_bug.cgi?id=59570
[2] https://bugzilla.xamarin.com/show_bug.cgi?id=58063
* This framework was a private framework before iOS 11.
This framework was a private framework before iOS 11, yet the headers claim
many API were introduced in iOS 10.
So take account of this difference by using the private framework location in
iOS 10.3 or earlier.
Testing these API from Xcode works fine when run on an iOS 10.3 device, and
I've confirmed the IOSurface framework is loaded from the private frameworks
path on older devices (and when built using Xcode 9 and linked with the public
framework path).
* Disable code to make IOSurface work on iOS 10.
Disable the code to make IOSurface work on iOS 10, since it may be rejected by
the App Store.
This also means adjusting the availability attributes, so that the
introspection tests pass (and to document that technically these API won't
work when used with Xamarin.iOS in iOS 10).
I've filed bug #[59201][1] to keep track of this, maybe we can re-enable this later.
[1]: https://bugzilla.xamarin.com/show_bug.cgi?id=59201
* [mmp] Fix symbol name for 32-bit Objective-C classes. Fixes#58861.
https://bugzilla.xamarin.com/show_bug.cgi?id=58861
* [tests] Add test case for bug #58861.
https://bugzilla.xamarin.com/show_bug.cgi?id=58861
* [tests] Fix build failure for msbuild and xammac tests.
Fixes this:
> tests/common/mac/ProjectTestHelpers.cs(93,68): error CS0117: 'Driver' does not contain a definition for 'Verbosity'
* [mmptest] Fix build to build MobileBinding.dll as well.
This makes sure tests that need MobileBinding.dll actually have it.
- https://bugzilla.xamarin.com/show_bug.cgi?id=58826
- If the first instance of Xamarin.Mac.dll or another arch specific assembly
is found as a library reference, it would not be handled correctly. This caused
the "reference" assembly to be copied in, which is 64-bit.
- This causes startup crashes in 32-bit applications
* [mtouch/mmp] Set CultureInfo.CurrentCulture according to LANG.
This makes it easier to run mtouch/mmp under different locales when testing.
Unfortunately mono checks the system locale before checking LANG, which means
that there's no built-in way in macOS/mono to specify the current locale
without changing the system locale.
* [mtouch] Print verbosity using an invariant culture. Fixes#58849.
https://bugzilla.xamarin.com/show_bug.cgi?id=58849
* [mtouch/mmp] Fix error code.
* [mtouch/mmp] Log/warn when we set the current language.
- This option disables the check that prevents linking on non-modern profiles
- Due to System.Configuration, this is unsafe in general. It may cause assorted runtime crashes.
* Bump to Xcode 9 beta 5.
* [mmp] Disable the partial static registrar, because Apple's macOS SDK is broken.
> In file included from Xamarin.Mac.registrar.mobile.i386.m:1:
> In file included from ./Xamarin.Mac.registrar.mobile.i386.h:11:
> /Applications/Xcode9-beta5.app/Contents/Developer/Platforms/MacOSX.platform/Developer/SDKs/MacOSX10.13.sdk/System/Library/Frameworks/AVFoundation.framework/Headers/AVFoundation.h:88:9: fatal error: 'AVFoundation/AVRouteDetector.h' file not found
https://bugzilla.xamarin.com/show_bug.cgi?id=58629
* [mmp] Fix partial static registrar removal.
* [CallKit] Update to Xcode 9 beta 5.
* [ARKit] ARPointCloud doesn't conform to NSCopying anymore in Xcode 9 beta 5.
* [ARKit] Update to Xcode 9 beta 5 enough to make tests happy.
* [CoreImage] Stub out new filters in Xcode 9 beta 5.
* [tests][monotouch] Simplify some MDLMesh asserts since values change a lot between OS versions.
* [mmp] Default to the dynamic registrar for release builds again, due to bug #58629.
https://bugzilla.xamarin.com/show_bug.cgi?id=58629
* [tests][introspection] CXCall started implementing NSCopying without saying so in the headers.
* Disable mmp static registrar tests due to 58629 for now
* [Vision] Add bindings for Xcode 9 Beta 1 & 2
This commit also adds two convenience overloads to GetAttachments
that allows you to get a more strongly typed version of the
returned dictionary, this is needed because there is no easy way
to downcast from NSDictionary to NSDictionary<TKey, TValue>
and it is used in the sample that excecises the Vision API found here
https://github.com/dalexsoto/FaceDetector
* [Vision] Implement feedback
* Add commas to enums to avoid diff spam
* Throw a managed exception when we fail to dinamically call Vision framework
* [Vision] Update to xcode 9 Beta 3
* [vision] fix VNImageCropAndScaleOption enum
Also removed public modifier from enums in order to have interfaces
and enums in sync
* [Vision] Add missing comma to enum
* [Vision] More API enhancements
* Removed default .ctor from types that are not user created
* Added Strong Dictionary to VNImageRequestHandler ctors
* Turned VNImageOption into a StrongDictionary
* Added bug report[1] for BarcodeDescriptor so we do not forget
* Removed duped metadata from manual bindings
* VNDetectedObjectObservation subclasses now have the factory
method FromBoundingBox inherited from its parent class
(VNDetectedObjectObservation).
[1]: https://bugzilla.xamarin.com/show_bug.cgi?id=58197
* [Vision] Merge extern API with wrappers, fixed intro!
* [Vision] Add one missing public accessor to VNUtils
* [CoreML] Add Xcode 9 Beta 1 bindings
* Do not C# 7 here... :'(
* No C# 7 here either :'(
* Apply feedback
* [CoreML] Fix feedback and xtro
* [CoreML] Add more feedback
* Fix build.... What the heck was I thinking, always rebuild your stuff...
* [mtouch] Improve how we make sure native symbols aren't stripped away. Fixes#51710 and #54417.
* Refactor required symbol collection to store more information about each
symbol (field, function, Objective-C class), and in general make the code
more straight forward.
* Implement support for generating source code that references these symbols,
and do this whenever we can't ask the native linker to keep these symbols
(when using bitcode). Additionally make it possible to do this manually, so
that the source code can be generated for non-bitcode platforms too (which
is useful if the number of symbols is enormous, in which case we might
surpass the maximum command-line length).
* Also make it possible to completely ignore native symbols, or ignore them on
a per-symbol basis. This provides a fallback for users if we get something
right and we try to preserve something that shouldn't be preserved (for
instance if it doesn't exist), and the user ends up with unfixable linker
errors.
* Don't collect Objective-C classes unless they're in an assembly with
LinkWith attributes. We don't need to preserve Objective-C classes in any
other circumstances.
* Implement everything for both Xamarin.iOS and Xamarin.Mac, and share the
code between them.
* Remove previous workaround for bug #51710, since it's no longer needed.
* Add tests.
https://bugzilla.xamarin.com/show_bug.cgi?id=54417https://bugzilla.xamarin.com/show_bug.cgi?id=51710
* [mtouch] Make sure to only keep symbols from the current app when code sharing.
This fixes a build problem with the interdependent-binding-projects test when
testing in Today Extension mode.
This change introduces the export of create_classes methods as objc compatible, without enforcing Objective-C++ as the development language for custom registrar embedders by moving the stringbuilder flushing inside the extern "C" block.
Mark the generated linking code as extern "C" too and also change the return type of xamarin_create_classes_Xamarin_Mac to void in mmp generation, as it was mistakenly set to int.
* Update to mono 2017-04 branch
* Patch from Zoltan to fix build error with CppSharp.CppParser.dll
* Include new linker files in Makefile, based on mareks commit
* [msbuild] Fix running bgen for Xamarin.Mac.
bgen must be executed with the system mono, not bmac-mobile-mono, and without
the MONO_PATH variable set.
* System.Data tests should act as if they are running on mobile profile
* Add --runtime=mobile to mono flags in Modern
* Move runtime launcher options up
* System.Data tests should use Mobile profile (mac fix)
* Bump 2017-04 to pick up AOT and assembly resolution fixes
* Build fixes for netstandard.dll and System.Drawing.Primitives.dll
The new handling went in with https://github.com/mono/mono/pull/4501.
I also noticed that WatchOS was missing a target for System.Drawing.Primitives.dll, so I added that.
* Add netstandard.dll to 2.1/Facades and System.Drawing.Primitives.dll to WatchOS
* Fix 2.1/Facades/netstandard.dll build
* Fix the netstandard targets
* Bump mono to latest 2017-04 commit
* [xharness] Fix adding defines to csproj by correctly detecting existing defines.
* Bump mono to latest 2017-04 commit
* [mtouch] Update csproj with new files.
* [mtouch] Improve reporting for MarkExceptions from the linker.
* Bump mono to latest 2017-04 commit
* Bump mono to pick up latest 2017-04 branch commit (Fixes#55436)
Fixes https://bugzilla.xamarin.com/show_bug.cgi?id=55436
* Add a missing Makefile dependency
* Chris Hamons patch to apply --runtime=mobile as necessary at AOT time
(It is currently being applied for some configurations at runtime only)
* Bump system mono
* Bump mono for assembly loader changes
* Bump system mono
* Update assemblies list as some where moved to facades
6ca5ec442bc38e4d9220
* Bump mono to latest 2017-04 commit
* Add another new facade
* Bump mono to tip of 2017-04.
* Bump mono to tip of 2017-04.
* [tests][mtouch] Adjust tests to cope with fewer assemblies being included in linked apps. Fixes#56307 and #56308.
System.dll is now completely linked away unless the app actually uses any
System.dll API.
This is the change that caused this to change: 4960d5d2a2
Previously the following types would always be kept by the linker:
```
$ monodis --typedef System.dll
Typedef Table
1: (null) (flist=1, mlist=1, flags=0x0, extends=0x0)
2: ObjCRuntime.INativeObject (flist=1, mlist=1, flags=0xa0, extends=0x0)
3: Mono.Net.CFObject (flist=1, mlist=2, flags=0x100000, extends=0x5)
4: Mono.Net.CFArray (flist=4, mlist=19, flags=0x100, extends=0xc)
5: Mono.Net.CFNumber (flist=5, mlist=32, flags=0x100100, extends=0xc)
6: Mono.Net.CFRange (flist=5, mlist=41, flags=0x100108, extends=0x25)
7: Mono.Net.CFString (flist=7, mlist=42, flags=0x100100, extends=0xc)
8: Mono.Net.CFData (flist=8, mlist=53, flags=0x100100, extends=0xc)
9: Mono.Net.CFDictionary (flist=8, mlist=63, flags=0x0, extends=0xc)
10: Mono.Net.CFMutableDictionary (flist=10, mlist=75, flags=0x100100, extends=0x24)
11: Mono.Net.CFUrl (flist=10, mlist=80, flags=0x100100, extends=0xc)
12: Mono.Net.CFRunLoop (flist=10, mlist=83, flags=0x100100, extends=0xc)
13: Mono.Net.CFBoolean (flist=10, mlist=94, flags=0x100, extends=0x5)
14: Mono.AppleTls.SecCertificate (flist=13, mlist=106, flags=0x100100, extends=0x5)
15: Mono.AppleTls.SecIdentity (flist=14, mlist=122, flags=0x100, extends=0x5)
16: Mono.AppleTls.SecIdentity/ImportOptions (flist=19, mlist=134, flags=0x100105, extends=0x5)
17: Mono.AppleTls.SecKey (flist=19, mlist=134, flags=0x100100, extends=0x5)
18: Mono.AppleTls.SecStatusCode (flist=21, mlist=141, flags=0x100, extends=0x69)
19: Mono.AppleTls.SecTrustResult (flist=395, mlist=141, flags=0x100, extends=0x69)
20: Mono.AppleTls.SecImportExport (flist=404, mlist=141, flags=0x100100, extends=0x5)
21: Mono.AppleTls.SecImportExport/<>c (flist=404, mlist=144, flags=0x102103, extends=0x5)
22: Mono.AppleTls.SecPolicy (flist=406, mlist=147, flags=0x100100, extends=0x5)
23: Mono.AppleTls.SecTrust (flist=407, mlist=154, flags=0x100100, extends=0x5)
24: System.Security.Cryptography.OidGroup (flist=408, mlist=174, flags=0x101, extends=0x69)
25: System.Security.Cryptography.Oid (flist=420, mlist=174, flags=0x100101, extends=0x5)
26: System.Security.Cryptography.CAPI (flist=423, mlist=176, flags=0x100180, extends=0x5)
27: System.Security.Cryptography.AsnEncodedData (flist=423, mlist=178, flags=0x100101, extends=0x5)
28: System.Security.Cryptography.X509Certificates.X509Utils (flist=424, mlist=179, flags=0x100100, extends=0x5)
29: System.Security.Cryptography.X509Certificates.PublicKey (flist=424, mlist=181, flags=0x100101, extends=0x5)
30: System.Security.Cryptography.X509Certificates.X509Certificate2 (flist=429, mlist=188, flags=0x102101, extends=0x51)
31: System.Security.Cryptography.X509Certificates.X509Certificate2Impl (flist=431, mlist=204, flags=0x100080, extends=0x55)
32: System.Security.Cryptography.X509Certificates.X509CertificateCollection (flist=431, mlist=209, flags=0x102101, extends=0x6d)
33: System.Security.Cryptography.X509Certificates.X509CertificateCollection/X509CertificateEnumerator (flist=431, mlist=212, flags=0x100102, extends=0x5)
34: System.Security.Cryptography.X509Certificates.X509Helper2 (flist=432, mlist=217, flags=0x100180, extends=0x5)
35: <PrivateImplementationDetails> (flist=432, mlist=218, flags=0x100, extends=0x5)
36: <PrivateImplementationDetails>/__StaticArrayInitTypeSize=9 (flist=433, mlist=219, flags=0x113, extends=0x25)
```
Some of the above types from System.dll implemented ObjCRuntime.INativeObject
(from System.dll), which our linker detected as implementing
ObjCRuntime.INativeObject (from Xamarin.iOS.dll), so these types were treated
as custom NSObject subclasses, and the MarkNSObjects linker step would mark
them (which would in turn cause all the other types in the list to be marked).
With that change, these types now implement ObjCRuntimeInternal.INativeObject,
and the linker does not treat them as custom NSObject subclasses anymore.
I think the new behavior is correct: these types do not actually inherit from
the real NSObject/INativeObject, so the linker should not treat them as such.
This may run into different bugs because the linker might now remove more
stuff than before, but that would be a different issue.
This means that the fix is to modify these tests accordingly.
https://bugzilla.xamarin.com/show_bug.cgi?id=56307https://bugzilla.xamarin.com/show_bug.cgi?id=56308
* Bump mono to latest.
* Fix merge conflict that was missed
* [mtouch] Renumber new error which clashes with an existing error number in master.
Fixes this compiler warning:
/work/maccore/master/xamarin-macios/tools/common/DerivedLinkContext.cs(12,28): warning CS0649: Field 'DerivedLinkContext.StaticRegistrar' is never assigned to, and will always have its default value null
and makes the mmp code closer to mtouch.
The generated registrar code must be built with -DDYNAMIC_MONO_RUNTIME so that
it references our local mono functions which do a dynamic function lookup.
This fixes an issue where release builds that don't embed mono fails to link,
because there are numerous unresolved externals pointing to mono symbols.
Replace https://github.com/xamarin/xamarin-macios/pull/1973 expect that
the test parts are still needed.
* Add XM SDK + LinkSkip test
* [macos] Add platform linking support to msbuild
* [macos] Add full SDK test
* [macios] Diable classic from using linkplatform
- Extended test infrastructure change to allow classic projects that include bundling
- Setting linkplatform in MonoBundlingExtraArgs since we don't even read project setting LinkMode - Platform for classic
- Actually enable hybrid AOT by adding argument in right location
- Hybrid AOT and stripping does not play well currently with partial AOT
- Fix AOT makefile to work with nuget nunit
- https://bugzilla.xamarin.com/show_bug.cgi?id=55041