* [linker] Remove non-bitcode compatible code, and show a warning.
Remove code not currently compatible with bitcode and replace it with an
exception instead (otherwise we'll assert at runtime).
Also show a warning when we detect this.
This is quite helpful when looking at watch device test runs to filter out
failures we already know about.
This fixes point #2 in #4763.
* Improve documentation.
* Simplify linker code by using a substep.
* Fix whitespace issues.
* Improve reporting.
* Add support for reporting more than one MT2105 at the same time when making
the errors instead of warnings.
* Only report MT2105 for methods that haven't been linked away.
* Format the error message nicer for properties.
* Tweak a bit for warning tests to pass.
* Use ExceptionalSubStep to provide better error information.
* Adjust where linker warnings/errors are reported from to avoid a NullReferenceException.
* [static registrar] Optimize creation of delegates for blocks.
Optimize creation of delegates for blocks so that it doesn't require the
dynamic registrar.
This is done by getting the metadata token for the Create method that creates
the delegate, and embed that metadata token in the generated code from the
static registrar.
Also add tests, since this scenario was not covered by tests already.
* [mmptest] Fix test after recent changes.
* [test-libraries] Avoid duplicate symbols.
* [tests] Update according to changes.
* [static registrar] Optimize creation of delegates for blocks.
Optimize creation of delegates for blocks so that it doesn't require the
dynamic registrar.
This is done by getting the metadata token for the Create method that creates
the delegate, and embed that metadata token in the generated code from the
static registrar.
Also add tests, since this scenario was not covered by tests already.
* [mmptest] Fix test after recent changes.
* [test-libraries] Avoid duplicate symbols.
* [tests] Update according to changes.
Improved linker to:
* Not mark protocol interfaces by the mere virtue of having a type that
implements them. This is implemented by not marking protocol interfaces when
they're implementing a class, but instead when a method implementation is
found to implement a method from a protocol interface.
* Mark the wrapper type for protocols (this allows us to remove the Protocol
attribute, since that's the link between the protocol and its wrapper type).
* Remove the [Protocol], [ProtocolMember] and [Adopts] attributes.
The static registrar still needs some of the information linked away, so a few
changes are required to make it available post linker.
* [linker] Optimize calls to BlockLiteral.SetupBlock to inject the block signature.
Optimize calls to BlockLiteral.SetupBlock[Unsafe] to calculate the block
signature at build time, and inject it into the call site.
This makes block invocations 10-15x faster (I've added tests that asserts at
least an 8x increase).
It's also required in order to be able to remove the dynamic registrar code in
the future (since calculating the block signature at runtime requires the
dynamic registrar).
* [mtouch/mmp] Add support for reporting errors/warnings that point to the code line causing the error/warning.
Add support for reporting errors/warnings that point to the code line causing
the error/warning by adding ErrorHelper overloads that take the exact
instruction to report (previously we defaulted to the first line/instruction
in a method).
* [tests] Add support for asserting filename/linenumber in warning messages.
* Make all methods that manually create BlockLiterals optimizable.
* [tests] Create a BaseOptimizeGeneratedCodeTest test that's included in both XI's and XM's link all test.
* [tests] Add link all test (for both XI and XM) to test the BlockLiteral.SetupBlock optimization.
* [tests] Add mtouch/mmp tests for the BlockLiteral.SetupBlock optimization.
* [tests][linker] Make the base test class abstract, so tests in the base class aren't executed twice.
* [tests][linker] Don't execute linkall-only tests in linksdk.
The optimization tests only apply when the test assembly is linked, and that
only happens in linkall, so exclude those tests in linksdk.
* [tests][mmptest] Update test according to mmp changes.
Fixes these test failures:
1) Failed : Xamarin.MMP.Tests.MMPTests.MM0132("inline-runtime-arch")
The warning 'MM0132: Unknown optimization: 'inline-runtime-arch'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size.' was not found in the output:
Message #1 did not match:
actual: 'Unknown optimization: 'inline-runtime-arch'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size, blockliteral-setupblock.'
expected: 'Unknown optimization: 'inline-runtime-arch'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size.'
Message #2 did not match:
actual: 'Unknown optimization: 'inline-runtime-arch'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size, blockliteral-setupblock.'
expected: 'Unknown optimization: 'inline-runtime-arch'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size.'
2) Failed : Xamarin.MMP.Tests.MMPTests.MM0132("foo")
The warning 'MM0132: Unknown optimization: 'foo'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size.' was not found in the output:
Message #1 did not match:
actual: 'Unknown optimization: 'foo'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size, blockliteral-setupblock.'
expected: 'Unknown optimization: 'foo'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size.'
Message #2 did not match:
actual: 'Unknown optimization: 'foo'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size, blockliteral-setupblock.'
expected: 'Unknown optimization: 'foo'. Valid optimizations are: remove-uithread-checks, dead-code-elimination, inline-isdirectbinding, inline-intptr-size.'
* [tests][linker] Fix typo.
Fixes this test failure:
1) SetupBlock_CustomDelegate (Linker.Shared.BaseOptimizeGeneratedCodeTest.SetupBlock_CustomDelegate)
Counter
Expected: 1
But was: 2
* [registrar] Minor adjustment to error message to match previous (and better) behavior.
Fixes this test failure:
1) Failed : Xamarin.Registrar.GenericType_WithInvalidParameterTypes
The error 'MT4136: The registrar cannot marshal the parameter type 'System.Collections.Generic.List`1<U>' of the parameter 'arg' in the method 'Open`1.Bar(System.Collections.Generic.List`1<U>)'' was not found in the output:
Message #1 did not match:
actual: 'The registrar cannot marshal the parameter type 'System.Collections.Generic.List`1<Foundation.NSObject>' of the parameter 'arg' in the method 'Open`1.Bar(System.Collections.Generic.List`1<U>)''
expected: 'The registrar cannot marshal the parameter type 'System.Collections.Generic.List`1<U>' of the parameter 'arg' in the method 'Open`1.Bar(System.Collections.Generic.List`1<U>)''
* [docs] mmp shows MM errors/warnings.
* [docs] Improve according to reviews.
* [tests] Fix merge failure causing test duplication.
* [mtouch/mmp] Give users more control over optimizations, and share more code between mtouch and mmp.
1. Add an --optimize flag to mtouch/mmp that allows users to select which
optimizations to apply (or not). This makes it easier to add future
optimizations, and allow users to disable any optimization that causes
problems without having to disable many other features.
2. Share as much optimization code as possible between mtouch and mmp. This
immediately gives a benefit to mmp, which has three new optimizations only
mtouch had: NSObject.IsDirectBinding inlining, IntPtr.Size inlining and
dead code elimination.
This results in ~6kb of disk space saved for a linked Xamarin.Mac app:
* link sdk: [Debug][1], [Release][2]
* link all: [Debug][3], [Release][4]
Testing also verifies that monotouchtest ([Debug][5], [Release][6]) has not
changed size at all, which means that no default optimizations have changed
inadvertedly.
[1]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#link-sdk-mac--debug
[2]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#link-sdk-mac--release
[3]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#link-all-mac--debug
[4]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#link-all-mac--release
[5]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#monotouchtest-iphonedebug64
[6]: https://gist.github.com/rolfbjarne/6b731e3b5ca6170355662e6505c3d492#monotouchtest-iphonerelease64
* [tools] Don't enable the IsDirectBinding optimization by default for Xamarin.Mac apps, it's not safe.
* Fix whitespace issues.
* [doc] Document optimizations.
* Officially support optimizations by adding them to the Versions.plist.
* [linker] Improve IntPtr.Size inliner + dead code eliminatior and add tests.
* Properly handle operands for the ldc_i4_s instruction (they're sbyte).
* Fix less-than condition to actually do a less-than comparison.
* Make sure to look up the bitness in the Target, not the Application, since
the Application's value will be incorrect when building fat apps (both
Is32Build and Is64Build will be true).
* Remove unnecessary checks for the IntPtr.Size inliner: this optimization
does not depend on other instructions than the IntPtr.get_Size call, so
remove the checks that verify surrounding instructions. This makes the
IntPtr.Size inliner kick in in more scenarios (such as the new tests).
* Add tests.
* [tests] Add mmp tests for optimizations.
* [tests] Fix XM optimization tests.
* [tests] Fix test build error.