20 KiB

Исходник Ответственный История

Configuration and Command Line Options

Command Line Options

'azbridge' can be run in a "local" or "remote" mode. The "local" mode binds a local listener address or socket to a relay name. The "remote" mode binds a relay name to a remote listener address.

Since azbridge helps with scenarios not dissimilar to SSH tunnels, albeit without requiring peer-to-peer connectivity, the command line syntax of 'azbridge' uses elements that resemble SSH's equivalent tunnel functionality, especially the -L and -T arguments. The key difference to SSH is that azbridge always binds sockets to an Azure Relay name, and that Azure Relay acts as the identifier for the tunnel and as network rendezvous point. In other words, you always need to pair an azbridge instance running as local forwarder with an azbridge running as a remote forwarder on the other end.

SSH's dynamic SOCKS proxy functionality (SSH's -D option) is not supported since it puts clients in control of selecting remote hosts after they've been bridged into a foreign network, and this may pose significant security risks and might inadvertently enable undesired access to resources on that foreign network.

(C) -- 127.3.2.1:5000 -> (L) -- ['myname'] -> (R) -- 10.1.2.3:5000 -> (S)

(C) Client
(L) Local forwarder: azbridge -L 127.3.2.1:5000:myname
(R) Remote forwarder: azbridge -T myname:10.1.2.3:5000
(S) Server listening at 10.1.2.3:5000

A single instance of azbridge can support multiple concurrent "local" listeners and multiple "remote" forwarders concurrently, also in a mixed configuration.

The required Azure Relay connection string can either be supplied on the command line, can be picked from an environment variable, or from a configuration file.

The connection string's embedded authentication/authorization information must confer sufficient permissions for the desired operation(s) to be executed, e.g. for the "local" mode, the connection string must enable the bridge to send to the configured relay entity.

Arguments:

-b bind_address

Use bind_address on the local machine as the source address of forwarding connections. Only useful on systems with more than one address.

-D

Reserved. Not presently supported

-E endpoint_uri

Azure Relay endpoint URI (see -x).

-F configfile

Specifies an alternative per-user configuration file. If a configuration file is given on the command line, the system-wide configuration file (Linux: /etc/azbridge/azbridge_config.machine.yml, Windows: %ALLUSERSPROFILE%\Microsoft\AzureBridge\azbridge_config.machine.yml) will be ignored.

The default for the per-user configuration file is ~/.azurebridge/config on Linux and %USERPROFILE%.azurebridge\config on Windows.

-g

Allows remote hosts to connect to local forwarded ports.

-K policy_name

Azure Relay shared access policy name to use (see -x).

-k policy_key

Azure Relay shared access policy key to use (see -x).

-L [bind_address:]port[/port_name]{;...}:relay_name
-L local_socket[/port_name]{;...}:relay_name

Specifies that connections to the given TCP/UDP port(s) or Unix socket(s) on the local (client) host are to be bound (forwarded) to the given Azure Relay name.

bind_address: Optional local IP address to bind the listener to. This may be a DNS name or a numerical IPv4 or IPv6 address expression and must resolve to a network endpoint on the local machine. When omitted, the listener is bound to all addresses ("any").
port: TCP or UDP port number. TCP ports are the default. UDP port numbers must be suffixed with U, e.g. -L 3434U:relay.
local_socket: Unix socket name. The expression will be interpreted as a Unix socket name if it's not a valid port expression (i.e. not a number, with optional protocol suffix).
port_name: Optional logical name for the port. If a "local" TCP port ought to be mapped to a different "remote" TCP port, a logical name allows this clearly, e.g. -L 13389/rdp:relay matches to -T relay:rdp/3389 on the logical port name rdp, which is bound to TCP port 13389 on the local side and TCP port 3389 on the remote side. For TCP/UDP, the default value for port_name is the port value itself, meaning -L 13389:relay can also be matched with -T relay:13389/3389. For Unix sockets, this logical mapping can also be used, and the default value is the name of local_socket. It is permitted for multiple local TCP ports and Unix sockets or for multiple UDP ports to use the same logical port name. UDP ports must always be matched to remote UDP forwarders.
relay_name: Name of the relay to bind the port(s) to.

There can be multiple local binding expressions given for a relay_name, separated by semicolons. The expressions can also mix protocols, e.g. -L 7777;7777U:relay binds the TCP and UDP ports 7777 to one relay name.

The bridge opens a listener on a TCP or UDP port or a Unix socket "here". The TCP or UDP listener is optionally bound to the specified bind_address. Whenever a connection is made to the local port or socket, the connection is forwarded to a connected remote bridge via the chosen Relay entity.

Port forwardings can also be specified in the configuration file. Only the superuser can forward privileged ports. IPv6 addresses can be specified by enclosing the address in square brackets.

By default, the local port is bound in accordance with the GatewayPorts configuration setting. However, an explicit bind_address may be used to bind the connection to a specific address. The bind_address of ``localhost'' indicates that the listening port be bound for local use only, while an empty address or '*' indi- cates that the port should be available from all interfaces.

The -L option can be used multiple times on a single command line, but only once per relay_name.

-o option

Can be used to give options in the format used in the configura- tion file. This is useful for specifying options for which there is no separate command-line flag.

-q

Quiet mode. Causes most warning and diagnostic messages to be suppressed.

-H relay_name:http/hostport{;...}
-H relay_name:http/host[/path]:hostport{;...}
-H relay_name:https/hostport{;...}
-H relay_name:https/host[/path]:hostport{;...}

Specifies that HTTP requests to the given Azure Relay name are to be forwarded to the given host and port. For any Relay name, this is mutually exclusive with the use of the -T option.

The required logical port names "http" and "https" indicate which protocol shall be used when forwarding requests to the target.

relay_name: Name of the relay to bind the forwarder to.
host: Host name or IP address to forward to.
path : Path prefix to append to the outgoing requests. The relay name is stripped.
hostport: TCP port number. (defaults to 443 for https and 80 for http)

-T relay_name:[port_name/]hostport{;...}
-T relay_name:[port_name/]host:hostport{;...}
-T relay_name:[port_name/]local_socket{;...}

Specifies that connections to the given Azure Relay name and optional logical port name are to be forwarded to the given host and port, or Unix socket*. Whenever a connection is made to the Relay and logical port, the connection is forwarded to this listener (or a concurrently connected listener in a random load distribution fashion), and a then a forwarding connection is made to either port, host:hostport, or local_socket, from the local machine.

relay_name: Name of the relay to bind the forwarder to.
port_name: Optional logical name for the port as defined by the local forwarder bound to this relay (see -L).
host: Host name or IP address to forward to.
hostport: TCP or UDP port number. TCP ports are the default. UDP port numbers must be suffixed with U, e.g. -T relay:3434U. UDP forwarders can only be bound to logcial UDP ports.
local_socket: Unix socket name. The expression will be interpreted as a Unix socket name if it's not a valid port expression (i.e. not a number, with optional protocol suffix).

There can be multiple local binding expressions given for a relay_name, separated by semicolons. The expressions can also mix protocols, e.g. -T relay:7777;7777U binds to TCP and UDP port forwarders for 7777 on one relay name.

Port forwardings can also be specified in the configuration file. Privileged ports can be forwarded only when running with elevated privileges.
IPv6 addresses can be specified by enclosing the address in square brackets.

The -T option can be used multiple times on a single command line, but only once for each relay_name.

-R relay_name:[port_name/]hostport{;...}
-R relay_name:host:[port_name/]hostport{;...}
-R relay_name:[port_name/]local_socket{;...}

Backwards compatibility option for -T with outdated (because confusing) placement of the host name.

-S signature

Azure Relay shared access signature (previously issued access token) to use (see -x)

-V

Display the version number and exit.

-v

Verbose mode. Causes ssh to print debugging messages about its progress. This is helpful in debugging connection, authentica- tion, and configuration problems. Multiple -v options increase the verbosity. The maximum is 3.

-x connection_string

Connection String. Azure Relay connection string for the namespace or for a specific Azure Relay. The Connection String properties can be overridden by the -E (Endpoint), -K (SharedAccessKeyName), -k (SharedAccessKey), -S (SharedAccessSignature) arguments.

If an EntityPath is specified in the connection string, that name is the only valid option for the relay_name expressions in the -L and -T options or for expressions in the effective configuration file.

The connection string can be set via the AZURE_BRIDGE_CONNECTIONSTRING environment variable.

Configuration File

The configuration file is a YAML file that specifies options that apply to the machine or user. The machine level options are always read and then complemented by or overridden by the user-level options.

The configuration file can exist in three locations:

Machine configuration, always loaded if present. Linux: /etc/azurebridge/azurebridge_config Windows: %PROGRAMDATA%\Microsoft\AzureBridge\azbridge_config.machine.yml
User configuration, overrides and complements machine config. Linux: ~/.azbridge/azbridge_config.yml Windows: %APPDATA%\azbridge\azbridge_config.yml
Override user configuration location for current execution with the -f option.

The configuration file holds a range of configuration options that, just like the command line options, partially lean on similar expressions used in SSH, even though the configuration format differs from that of SSH.

The "LocalForward" and "RemoteForward" sections define bindings as with the -L and -T command line options above.

AddressFamily - Specifies which address family to use when connecting. Valid arguments are "any", "inet" (use IPv4 only), or "inet6" (use IPv6 only). The default is "any".
AzureRelayConnectionString - Azure Relay connection string for a Relay namespace. Only one namespace connection string can be specified per configuration file.
AzureRelayEndpoint - Azure Relay endpoint URI for a Relay namespace. Overrides the 'Endpoint' property of the connection string, if present.
AzureRelaySharedAccessKeyName - Azure Relay shared access policy name. Overrides the 'SharedAccessKeyName' property of the connection string, if present.
AzureRelaySharedAccessKey - Azure Relay shared access policy key. Overrides the 'SharedAccessKey' property of the connection string, if present.
AzureRelaySharedAccessSignature - Azure Relay shared access policy signature. Overrides the 'SharedAccessSignature' property of the connection string, if present.
BindAddress - Use the specified address on the local machine as the source address of the connection. Only useful on systems with more than one address.
ClearAllForwardings - Specifies that all local, and remote port forwardings specified in the configuration files or on the command line be cleared. This option is primarily useful when used from the command line to clear port forwardings set in configura- tion files. The argument must be "true" or "false". The default is "false".
ConnectionAttempts - Specifies the number of tries (one per second) to make before exiting. The argument must be an integer. This may be useful in scripts if the connection sometimes fails. The default is 1.
ConnectTimeout - Specifies the timeout (in seconds) used when connecting to the relay server, instead of using the default system TCP timeout. This value is used only when the target is down or really unreachable, not when it refuses the connection.
ExitOnForwardFailure - Specifies whether azbridge(1) should terminate the connection if it cannot set up all requested local, and remote port forwardings, (e.g. if either end is unable to bind and listen on a specified port). The argument must be "true" or "false". The default is "false".
GatewayPorts - Specifies whether remote hosts are allowed to connect to local forwarded ports. By default, azbridge(1) binds local port forwardings to the loopback address. This prevents other remote hosts from connecting to forwarded ports. GatewayPorts can be used to specify that azbridge should bind local port forwardings to the wildcard address, thus allowing remote hosts to connect to forwarded ports. The argument must be "true" or "false".
The default is "false".
LocalForward - Specifies that a (set of) TCP ports on the local machine shall be forwarded via the Azure Relay. Each entry can have four properties, "BindAddress", "Port", "LocalSocket", and "RelayName". See below for details.
LogLevel - Gives the verbosity level that is used when logging messages from azbridge(1). The possible values are: QUIET, FATAL, ERROR, INFO, VERBOSE, DEBUG, DEBUG1, DEBUG2, and DEBUG3. The default is INFO. DEBUG and DEBUG1 are equivalent. DEBUG2 and DEBUG3 each specify higher levels of verbose output.
RemoteForward - Specifies that a TCP port on the remote machine be bound to a name on the Azure Relay. Each entry can have four properties, "RelayName", "Host", "HostPort", and "LocalSocket". See below for details.

LocalForward properties

The following properties are defined for LocalForward. LocalForward is a list and multiple entries are permitted.

RelayName - name of the Azure Relay name to bind to
ConnectionString - optional Azure Relay connection string to use just for this forwarder, overriding the global AzureRelayConnectionString property.

For a single port binding on the Relay name, the following properties can be used on the same entry. For multiple bindings they can be used to form a list.

BindAddress - network address to bind the socket to
PortName - Logical port name
BindPort - TCP port to bind the socket to
BindLocalSocket - named UNIX socket to bind to
RemoteHostName - optionally, remote host name represented by this entry (purely informational)

Examples:

Single listener binding:

   - RelayName: myrelay
     BindAddress: 127.0.8.1
     BindPort: 8888

Multiple listener binding:

   - RelayName: myrelay
     Bindings:          
      - BindAddress: 127.0.8.1
        BindPort: 5671
        PortName: amqps 
      - BindAddress: 127.0.8.1
        BindPort: 5672    
        PortName: amqp

Using BindAddress and BindPort is mutually exclusive with use of the BindLocalSocket option. The bind_address argument is optional and when omitted, the default is for the listener to bind to all interfaces.

The RelayName option is always required.

The RemoteHostName is property optional and used for documentation. Host names that shall resolve to the -L local forwarder address need to be added to the local hosts file.

The ConnectionString property is optional and overrides the global settings if supplied.

RemoteForward properties

The following properties are defined for RemoteForward. RemoteForward is a list and multiple entries are permitted.

RelayName - name of the Azure Relay name to bind to
ConnectionString - Azure Relay connection string to use for this forwarder

For a single port binding on the Relay name, the following properties can be used on the same entry. For multiple bindings they can be used to form a list.

Host - network address to forward to
HostPort - TCP port on the host to forward to
PortName - Logical port name
LocalSocket - named UNIX socket forward to
Insecure - ignores certificate validation errors for https forwarding

Examples:

Single listener binding:

   - RelayName: myrelay
     Host: localhost
     HostPort: 8888

Multiple listener binding:

   - RelayName: myrelay
     Bindings:
      - Host: broker.corp.example.com
        HostPort: 5671
        PortName: amqps 
      - Host: broker.corp.example.com
        HostPort: 5672    
        PortName: amqp

Using Host and HostPort is mutually exclusive with use of the LocalSocket option. The host argument is optional and when omitted, the default is for the forwarder to connect to the local machine.

The RelayName option is always required.

The ConnectionString property is optional and overrides the global settings if supplied.

Configuration examples

Example 1

This example shows a local configuration that enables local forwarders for three remote computers on different intranets via RDP.

---
GatewayPorts : no
LocalForward:

  # RDP to remote machine abcxyz
  - BindAddress: 127.0.10.1
    HostName: abcxyz.intra-de.example.com
    BindPort: 3389
    RelayName: abcxyzrdp

# SQL to remote machine abcxyz
  - BindAddress: 127.0.10.1
    HostName: abcxyz.intra-de.example.com
    BindPort: 1433
    RelayName: abcxyzsql

  # RDP to remote machine defijk
  - BindAddress: 127.0.10.2
    HostName: defijk.intra-us.example.com
    BindPort: 3389
    RelayName: defijkrdp
  
  # RDP to remote machine ghiuvw
  - BindAddress: 127.0.10.3
    HostName: ghiuvw.intra-jp.example.com
    BindPort: 3389
    RelayName: ghiuvwrdp

Example 2

This example shows a local configuration that enables the remote forwarder for RDP on the computer abcxyz from the prior example.

---
GatewayPorts : no
RemoteForward:

  # RDP to this machine abcxyz
  - RelayName: abcxyzrdp
    HostPort: 3389

Example 3

This example shows a local configuration that enables the remote forwarder for RDP to a computer defijk from the prior example on the remote network, but from a different computer.

---
GatewayPorts : no
RemoteForward:
# RDP to remote machine defijk
  - RelayName: defijkrdp
    Host: defijk.intra-us.example.com
    HostPort: 3389

Example 4

This example shows a configuration that allows access to a remote SQL server on a local network address of this computer.

---
GatewayPorts : true
LocalForward:

  # SQL to remote machine abcxyz
  - BindAddress: 10.10.100.2
    HostName: abcxyz.intra-de.example.com
    BindPort: 1433
    RelayName: abcxyzsql

20 KiB Исходник Ответственный История