(-Oprint-pubkey) to dump the full public key to stdout; based on patch from
Fabian Stelzer; ok markus@
OpenBSD-Commit-ID: 0598000e5b9adfb45d42afa76ff80daaa12fc3e2
signatures support key lifetimes, and allow the verification mode to specify
a signature time to check at. This is intended for use by git to support
signing objects using ssh keys. ok dtucker@
OpenBSD-Commit-ID: 3e2c67b7dcd94f0610194d1e8e4907829a40cf31
connection do need to use the same parameters (ie groups), the DH-GEX
protocol takes care of that and both ends do not need the same contents in
the moduli file, which is what the previous text suggested. ok djm@ jmc@
OpenBSD-Commit-ID: f0c18cc8e79c2fbf537a432a9070ed94e96a622a
the data needed to verify the attestation. Previously we were missing the
"authenticator data" that is included in the signature.
spotted by Ian Haken
feedback Pedro Martelletto and Ian Haken; ok markus@
OpenBSD-Commit-ID: 8439896e63792b2db99c6065dd9a45eabbdb7e0a
When we know that a particular action will require a PIN, such as
downloading resident keys or generating a verify-required key, request
the PIN before attempting it.
joint work with Pedro Martelletto; ok markus@
OpenBSD-Commit-ID: 863182d38ef075bad1f7d20ca485752a05edb727
FIDO2 supports a notion of "user verification" where the user is
required to demonstrate their identity to the token before particular
operations (e.g. signing). Typically this is done by authenticating
themselves using a PIN that has been set on the token.
This adds support for generating and using user verified keys where
the verification happens via PIN (other options might be added in the
future, but none are in common use now). Practically, this adds
another key generation option "verify-required" that yields a key that
requires a PIN before each authentication.
feedback markus@ and Pedro Martelletto; ok markus@
OpenBSD-Commit-ID: 57fd461e4366f87c47502c5614ec08573e6d6a15
Reorder parameters list in the first usage() case - Sentence rewording
ok dtucker@
jmc@ noticed usage() missed -a flag too
OpenBSD-Commit-ID: f06b9afe91cc96f260b929a56e9930caecbde246
variable with that of the SecurityKeyProvider ssh/sshd_config(5) directive,
as the latter was more descriptive.
OpenBSD-Commit-ID: 0488f09530524a7e53afca6b6e1780598022552f
Allow writing to disk the attestation certificate that is generated by
the FIDO token at key enrollment time. These certificates may be used
by an out-of-band workflow to prove that a particular key is held in
trustworthy hardware.
Allow passing in a challenge that will be sent to the card during
key enrollment. These are needed to build an attestation workflow
that resists replay attacks.
ok markus@
OpenBSD-Commit-ID: 457dc3c3d689ba39eed328f0817ed9b91a5f78f6
from Markus:
use "principals" instead of principal, as allowed_signers lines may list
multiple.
When the signing key is a certificate, emit only principals that match
the certificate principal list.
NB. the command -Y name changes: "find-principal" => "find-principals"
ok markus@
OpenBSD-Commit-ID: ab575946ff9a55624cd4e811bfd338bf3b1d0faf
up the principal associated with a signature from an allowed-signers file.
Work by Sebastian Kinne; ok dtucker@
OpenBSD-Commit-ID: 6f782cc7e18e38fcfafa62af53246a1dcfe74e5d
for all operations. These are intended to future-proof the API a little by
making it easier to specify additional fields for without having to change
the API version for each.
At present, only two options are defined: one to explicitly specify
the device for an operation (rather than accepting the middleware's
autoselection) and another to specify the FIDO2 username that may
be used when generating a resident key. These new options may be
invoked at key generation time via ssh-keygen -O
This also implements a suggestion from Markus to avoid "int" in favour
of uint32_t for the algorithm argument in the API, to make implementation
of ssh-sk-client/helper a little easier.
feedback, fixes and ok markus@
OpenBSD-Commit-ID: 973ce11704609022ab36abbdeb6bc23c8001eabc
"ssh-keygen -K". This will save public/private keys into the current
directory.
This is handy if you move a token between hosts.
feedback & ok markus@
OpenBSD-Commit-ID: d57c1f9802f7850f00a117a1d36682a6c6d10da6
Move all moduli generation options to live under the -O flag.
Frees up seven single-letter flags.
NB. this change break existing ssh-keygen commandline syntax for moduli-
related operations. Very few people use these fortunately.
feedback and ok markus@
OpenBSD-Commit-ID: d498f3eaf28128484826a4fcb343612764927935
Move list of available certificate options in ssh-keygen.1 to the
CERTIFICATES section.
Collect options specified by -O but delay parsing/validation of
certificate options until we're sure that we're acting as a CA.
ok markus@
OpenBSD-Commit-ID: 33e6bcc29cfca43606f6fa09bd84b955ee3a4106
security key keypair to request one that does not require a touch for each
authentication attempt. The default remains to require touch.
feedback deraadt; ok markus@
OpenBSD-Commit-ID: 887e7084b2e89c0c62d1598ac378aad8e434bcbd
a similar extension for certificates. This option disables the default
requirement that security key signatures attest that the user touched their
key to authorize them.
feedback deraadt, ok markus
OpenBSD-Commit-ID: f1fb56151ba68d55d554d0f6d3d4dba0cf1a452e
linking against the (previously external) USB HID middleware. The dlopen()
capability still exists for alternate middlewares, e.g. for Bluetooth, NFC
and test/debugging.
OpenBSD-Commit-ID: 14446cf170ac0351f0d4792ba0bca53024930069
Mention the new key types, the ~/.ssh/id_ecdsa_sk file, ssh's
SecurityKeyProvider keyword, the SSH_SK_PROVIDER environment variable,
and ssh-keygen's new -w and -x options.
Copy the ssh-sk-helper man page from ssh-pkcs11-helper with minimal
substitutions.
ok djm@
OpenBSD-Commit-ID: ef2e8f83d0c0ce11ad9b8c28945747e5ca337ac4
Colin Watson
djm@openbsd.org
jmc@openbsd.org
dtucker@openbsd.org
solene@openbsd.org
naddy@openbsd.org