node/BUILDING.md

Building Node.js

Depending on what platform or features you need, the build process may differ. After you've built a binary, running the test suite to confirm that the binary works as intended is a good next step.

If you can reproduce a test failure, search for it in the Node.js issue tracker or file a new issue.

Table of Contents

• Supported platforms
  • Input
  • Strategy
  • Supported platforms
  • Supported toolchains
    • Unix
    • AIX
    • Windows
    • OpenSSL asm support
• Building Node.js on supported platforms
  • Unix/macOS
    • Prerequisites
    • Building Node.js
    • Running Tests
    • Running Coverage
    • Building the documentation
    • Building a debug build
  • Windows
  • Android/Android-based devices (e.g. Firefox OS)
  • Intl (ECMA-402) support
    • Default: small-icu (English only) support
    • Build with full ICU support (all locales supported by ICU)
      • Unix/macOS
      • Windows
    • Building without Intl support
      • Unix/macOS
      • Windows
    • Use existing installed ICU (Unix/macOS only)
    • Build with a specific ICU
      • Unix/macOS
      • Windows
• Building Node.js with FIPS-compliant OpenSSL
• Building Node.js with external core modules
  • Unix/macOS
  • Windows

Supported platforms

This list of supported platforms is current as of the branch/release to which it belongs.

Input

Node.js relies on V8 and libuv. We adopt a subset of their supported platforms.

Strategy

There are three support tiers:

• Tier 1: Full test coverage and maintenance by the Node.js core team and the broader community.
• Tier 2: Full test coverage. Limited maintenance, often provided by the vendor of the platform.
• Experimental: May not compile or test suite may not pass. These are often approaching Tier 2 support but are not quite ready. There is at least one individual providing maintenance.

Supported platforms

The community does not build or test against end-of-life distributions (EoL). For production applications, run Node.js on supported platforms only.

System	Support type	Version	Architectures	Notes
GNU/Linux	Tier 1	kernel >= 2.6.32, glibc >= 2.12	x64, arm
GNU/Linux	Tier 1	kernel >= 3.10, glibc >= 2.17	arm64
macOS/OS X	Tier 1	>= 10.11	x64
Windows	Tier 1	>= Windows 7/2008 R2/2012 R2	x86, x64	2,3,4
SmartOS	Tier 2	>= 15 < 16.4	x86, x64	1
FreeBSD	Tier 2	>= 11	x64
GNU/Linux	Tier 2	kernel >= 3.13.0, glibc >= 2.19	ppc64le >=power8
AIX	Tier 2	>= 7.1 TL04	ppc64be >=power7
GNU/Linux	Tier 2	kernel >= 3.10, glibc >= 2.17	s390x
GNU/Linux	Experimental	kernel >= 2.6.32, glibc >= 2.12	x86	limited CI
Linux (musl)	Experimental	musl >= 1.0	x64

1: The gcc4.8-libs package needs to be installed, because node binaries have been built with GCC 4.8, for which runtime libraries are not installed by default. For these node versions, the recommended binaries are the ones available in pkgsrc, not the one available from nodejs.org. Note that the binaries downloaded from the pkgsrc repositories are not officially supported by the Node.js project, and instead are supported by Joyent. SmartOS images >= 16.4 are not supported because GCC 4.8 runtime libraries are not available in their pkgsrc repository

2: Tier 1 support for building on Windows is only on 64-bit hosts. Support is experimental for 32-bit hosts.

3: On Windows, running Node.js in Windows terminal emulators like mintty requires the usage of winpty for the tty channels to work correctly (e.g. winpty node.exe script.js). In "Git bash" if you call the node shell alias (node without the .exe extension), winpty is used automatically.

4: The Windows Subsystem for Linux (WSL) is not directly supported, but the GNU/Linux build process and binaries should work. The community will only address issues that reproduce on native GNU/Linux systems. Issues that only reproduce on WSL should be reported in the WSL issue tracker. Running the Windows binary (node.exe) in WSL is not recommended. It will not work without workarounds such as stdio redirection.

Supported toolchains

Depending on the host platform, the selection of toolchains may vary.

Unix

• GCC 4.9.4 or newer
• Clang 3.4.2 or newer

AIX

• GCC 6.3 or newer

Windows

• Visual Studio 2017 with the Windows 10 SDK on a 64-bit host.

OpenSSL asm support

OpenSSL-1.1.0 requires the following assembler version for use of asm support on x86_64 and ia32.

• gas (GNU assembler) version 2.23 or higher
• Xcode version 5.0 or higher
• llvm version 3.3 or higher
• nasm version 2.10 or higher in Windows

If compiling without one of the above, use configure with the --openssl-no-asm flag. Otherwise, configure will fail.

The forthcoming OpenSSL-1.1.1 will have different requirements. Please refer to https://www.openssl.org/docs/man1.1.1/man3/OPENSSL_ia32cap.html for details.

Building Node.js on supported platforms

The bootstrapping guide explains how to install all prerequisites.

Unix/macOS

Prerequisites

• gcc and g++ 4.9.4 or newer, or
• clang and clang++ 3.4.2 or newer (macOS: latest Xcode Command Line Tools)
• Python 2.6 or 2.7
• GNU Make 3.81 or newer

On macOS, install the Xcode Command Line Tools by running xcode-select --install. Alternatively, if you already have the full Xcode installed, you can find them under the menu Xcode -> Open Developer Tool -> More Developer Tools.... This step will install clang, clang++, and make.

If the path to your build directory contains a space, the build will likely fail.

On FreeBSD and OpenBSD, you may also need:

• libexecinfo

Building Node.js

To build Node.js:

$ ./configure
$ make -j4

The -j4 option will cause make to run 4 simultaneous compilation jobs which may reduce build time. For more information, see the GNU Make Documentation.

Note that the above requires that python resolve to Python 2.6 or 2.7 and not a newer version.

After building, setting up firewall rules can avoid popups asking to accept incoming network connections when running tests.

Running the following script on macOS will add the firewall rules for the executable node in the out directory and the symbolic node link in the project's root directory.

$ sudo ./tools/macos-firewall.sh

Running Tests

To verify the build:

$ make test-only

At this point, you are ready to make code changes and re-run the tests.

If you are running tests before submitting a Pull Request, the recommended command is:

$ make -j4 test

make -j4 test does a full check on the codebase, including running linters and documentation tests.

Make sure the linter does not report any issues and that all tests pass. Please do not submit patches that fail either check.

If you want to run the linter without running tests, use make lint/vcbuild lint. It will run both JavaScript linting and C++ linting.

If you are updating tests and just want to run a single test to check it:

$ python tools/test.py -J --mode=release parallel/test-stream2-transform

You can execute the entire suite of tests for a given subsystem by providing the name of a subsystem:

$ python tools/test.py -J --mode=release child-process

If you want to check the other options, please refer to the help by using the --help option:

$ python tools/test.py --help

You can usually run tests directly with node:

$ ./node ./test/parallel/test-stream2-transform.js

Remember to recompile with make -j4 in between test runs if you change code in the lib or src directories.

The tests attempt to detect support for IPv6 and exclude IPv6 tests if appropriate. If your main interface has IPv6 addresses, then your loopback interface must also have '::1' enabled. For some default installations on Ubuntu that does not seem to be the case. To enable '::1' on the loopback interface on Ubuntu:

sudo sysctl -w net.ipv6.conf.lo.disable_ipv6=0

Running Coverage

It's good practice to ensure any code you add or change is covered by tests. You can do so by running the test suite with coverage enabled:

$ ./configure --coverage
$ make coverage

A detailed coverage report will be written to coverage/index.html for JavaScript coverage and to coverage/cxxcoverage.html for C++ coverage (if you only want to run the JavaScript tests then you do not need to run the first command ./configure --coverage).

Generating a test coverage report can take several minutes.

To collect coverage for a subset of tests you can set the CI_JS_SUITES and CI_NATIVE_SUITES variables:

$ CI_JS_SUITES=child-process CI_NATIVE_SUITES= make coverage

The above command executes tests for the child-process subsystem and outputs the resulting coverage report.

The make coverage command downloads some tools to the project root directory and overwrites the lib/ directory. To clean up after generating the coverage reports:

$ make coverage-clean

Building the documentation

To build the documentation:

This will build Node.js first (if necessary) and then use it to build the docs:

$ make doc

If you have an existing Node.js build, you can build just the docs with:

$ NODE=/path/to/node make doc-only

To read the documentation:

$ man doc/node.1

If you prefer to read the documentation in a browser, run the following after make doc is finished:

$ make docopen

This will open a browser with the documentation.

To test if Node.js was built correctly:

$ ./node -e "console.log('Hello from Node.js ' + process.version)"

To install this version of Node.js into a system directory:

$ [sudo] make install

Building a debug build

If you run into an issue where the information provided by the JS stack trace is not enough, or if you suspect the error happens outside of the JS VM, you can try to build a debug enabled binary:

$ ./configure --debug
$ make -j4

make with ./configure --debug generates two binaries, the regular release one in out/Release/node and a debug binary in out/Debug/node, only the release version is actually installed when you run make install.

To use the debug build with all the normal dependencies overwrite the release version in the install directory:

$ make install --prefix=/opt/node-debug/
$ cp -a -f out/Debug/node /opt/node-debug/node

When using the debug binary, core dumps will be generated in case of crashes. These core dumps are useful for debugging when provided with the corresponding original debug binary and system information.

Reading the core dump requires gdb built on the same platform the core dump was captured on (i.e. 64-bit gdb for node built on a 64-bit system, Linux gdb for node built on Linux) otherwise you will get errors like not in executable format: File format not recognized.

Example of generating a backtrace from the core dump:

$ gdb /opt/node-debug/node core.node.8.1535359906
$ backtrace

Windows

Prerequisites:

• Python 2.6 or 2.7
• The "Desktop development with C++" workload from Visual Studio 2017 or the "Visual C++ build tools" workload from the Build Tools, with the default optional components.
• Basic Unix tools required for some tests, Git for Windows includes Git Bash and tools which can be included in the global PATH.
• The NetWide Assembler, for OpenSSL assembler modules. If not installed in the default location, it needs to be manually added to PATH. A build with the openssl-no-asm option does not need this.
• Optional (to build the MSI): the WiX Toolset v3.11 and the Wix Toolset Visual Studio 2017 Extension.

If the path to your build directory contains a space or a non-ASCII character, the build will likely fail.

> .\vcbuild

To run the tests:

> .\vcbuild test

To test if Node.js was built correctly:

> Release\node -e "console.log('Hello from Node.js', process.version)"

Android/Android-based devices (e.g. Firefox OS)

Android is not a supported platform. Patches to improve the Android build are welcome. There is no testing on Android in the current continuous integration environment. The participation of people dedicated and determined to improve Android building, testing, and support is encouraged.

Be sure you have downloaded and extracted Android NDK before in a folder. Then run:

$ ./android-configure /path/to/your/android-ndk
$ make

Intl (ECMA-402) support:

Intl support is enabled by default, with English data only.

Default: small-icu (English only) support

By default, only English data is included, but the full Intl (ECMA-402) APIs. It does not need to download any dependencies to function. You can add full data at runtime.

Build with full ICU support (all locales supported by ICU):

With the --download=all, this may download ICU if you don't have an ICU in deps/icu. (The embedded small-icu included in the default Node.js source does not include all locales.)

Unix/macOS:

$ ./configure --with-intl=full-icu --download=all

Windows:

> .\vcbuild full-icu download-all

Building without Intl support

The Intl object will not be available, nor some other APIs such as String.normalize.

Unix/macOS:

$ ./configure --without-intl

Windows:

> .\vcbuild without-intl

Use existing installed ICU (Unix/macOS only):

$ pkg-config --modversion icu-i18n && ./configure --with-intl=system-icu

If you are cross-compiling, your pkg-config must be able to supply a path that works for both your host and target environments.

Build with a specific ICU:

You can find other ICU releases at the ICU homepage. Download the file named something like icu4c-**##.#**-src.tgz (or .zip).

To check the minimum recommended ICU, run ./configure --help and see the help for the --with-icu-source option. A warning will be printed during configuration if the ICU version is too old.

Unix/macOS

From an already-unpacked ICU:

$ ./configure --with-intl=[small-icu,full-icu] --with-icu-source=/path/to/icu

From a local ICU tarball:

$ ./configure --with-intl=[small-icu,full-icu] --with-icu-source=/path/to/icu.tgz

From a tarball URL:

$ ./configure --with-intl=full-icu --with-icu-source=http://url/to/icu.tgz

Windows

First unpack latest ICU to deps/icu icu4c-##.#-src.tgz (or .zip) as deps/icu (You'll have: deps/icu/source/...)

> .\vcbuild full-icu

Building Node.js with FIPS-compliant OpenSSL

This version of Node.js does not support FIPS.

Building Node.js with external core modules

It is possible to specify one or more JavaScript text files to be bundled in the binary as built-in modules when building Node.js.

Unix/macOS

This command will make /root/myModule.js available via require('/root/myModule') and ./myModule2.js available via require('myModule2').

$ ./configure --link-module '/root/myModule.js' --link-module './myModule2.js'

Windows

To make ./myModule.js available via require('myModule') and ./myModule2.js available via require('myModule2'):

> .\vcbuild link-module './myModule.js' link-module './myModule2.js'

Note for downstream distributors of Node.js

The Node.js ecosystem is reliant on ABI compatibility within a major release. To maintain ABI compatibility it is required that production builds of Node.js will be built against the same version of dependencies as the project vendors. If Node.js is to be built against a different version of a dependency please create a custom NODE_MODULE_VERSION to ensure ecosystem compatibility. Please consult with the TSC by opening an issue at https://github.com/nodejs/tsc/issues if you decide to create a custom NODE_MODULE_VERSION so we can avoid duplication in the ecosystem.