aspnetcore/docs/UpdatingMajorVersionAndTFM.md

Updating to a new Major Version & TFM

At the end of each release cycle, we update our Major Version (branding version of build assets) & TFM (Target Framework Moniker) in main, in preparation for the next major release. This doc describes the process of doing those updates, which can include many subtle gotchas in the aspnetcore repo.

In the event that we do a minor release (e.g. 3.1), the guidance in this document still applies (but with all instances of MajorVersion replaced by MinorVersion).

Updating Major Version

Typically, we will update the Major Version before updating the TFM. This is because updating Major Version only requires a logical agreement that main is no longer the place for work on the previous major release, while updating the TFM requires waiting for dotnet/runtime to update their TFM so that we can ingest that change. For an example, this is the PR where we updated our branding from 6.0.0 to 7.0.0 (note that branding does not have to happen in a dependency update PR - this particular branding exercise needed to include some reaction to runtime changes).

Required changes

• In eng/Versions.props:
  1. Increment AspNetCoreMajorVersion by 1.
  2. Change PreReleaseVersionIteration to 1.
  3. Change PreReleaseVersionLabel to alpha.
  4. Change PreReleaseBrandingLabel to Alpha $(PreReleaseVersionIteration).
• Add entries to NuGet.config for the new Major Version's feed. This just means copying the current feeds (e.g. dotnet8 and dotnet8-transport) and adding entries for the new feeds (dotnet9 and dotnet9-transport). Make an effort to remove old feeds here at the same time.
• In src/ProjectTemplates/Shared/TemplatePackageInstaller.cs, add an entry to _templatePackages for Microsoft.DotNet.Web.ProjectTemplates matching the new version.
• In eng/targets/CSharp.Common.props for the previous release branch, modify the <LangVersion> to be a hardcoded version instead of preview. (e.g. If main is being updated to 8.0.0 modify the <LangVersion> in the release/7.0 branch). See https://learn.microsoft.com/dotnet/csharp/language-reference/configure-language-version#defaults to find what language version to use.
• Mark APIs from the previous release as Shipped by running .\eng\scripts\mark-shipped.cmd. Note that it's best to do this as early as possible after the API surface is finalized from the previous release - make sure to be careful that any new API in main that isn't shipped as part of the previous release, stays in PublicAPI.Unshipped.txt files.
  • One way to ensure this is to check out the release branch shipping the previous release (after API surface area has been finalized), run .\eng\scripts\mark-shipped.cmd there, copy over all of the PublicAPI.Unshipped.txt and PublicAPI.Shipped.txt files into a new branch based off of main, and build the repo. Any failures there will tell you whether or not there are new APIs in main that need to be put back into the PublicAPI.Unshipped.txt files.
    • The result of .\eng\scripts\mark-shipped.cmd should be checked in to the release branch as well, as part of the RTM release.
• Update .\eng\Baseline.xml to reflect the set of RTM packages that were just shipped. Then, dotnet run .\eng\tools\BaselineGenerator\BaselineGenerator.csproj, which will update .\eng\Baseline.Designer.props. If RTM hasn't shipped yet, do this in a separate PR once it has. See https://github.com/dotnet/aspnetcore/pull/49269.
• In the new release branch, add files named .\eng\PlatformManifest.txt and .\eng\PackageOverrides.txt. These files should be found by downloading the just released RTM version of the Microsoft.AspNetCore.App.Ref package, and copying over the files from the data folder.
• Update helix-matrix.yml to list the currently active release branches.
  • This should be done in main as well as the relevant release branch.
• Update dependabot.yml to list the currently active release branches for submodule updates.
  • This only needs to be done in main.

Validation

• CI must be green.
• Assets produced by the build (packages, installers) should have the new branding version (e.g. if you have just updated MajorVersion to 8, packages should be branded 8.0.0-alpha.1.{BuildNumber}).
• Assemblies produced by the build should have the new AssemblyVersion (e.g. if you have just updated MajorVersion to 8, Assemblies should have AssemblyVersion 8.0.0.0).

Updating TFM

Once dotnet/runtime has updated their TFM, we update ours in the dependency update PR ingesting that change. We won't be able to ingest new dotnet/runtime dependencies in main until this is done. For an example, this is the PR where we updated our TFM to net7.0. This step can be tricky - we have workarounds in eng/tools/GenerateFiles/Directory.Build.targets.in to make the build work before we get an SDK containing runtime references with the new TFM. We copy the KnownFrameworkReference, KnownRuntimePack, and KnownAppHostPack from the previous TFM, give them the incoming runtime dependency versions, and give them the new TFM (these TFMs no-op most of the time - they only apply during this period when we're using an SDK that doesn't know about the new TFM). These workarounds allow us to build against the new TFM before we get an SDK with a reference to it, but there are often problems that arise in this area. The best way to debug build errors related to FrameworkReferences it to get a binlog of a failing project (dotnet build /bl) and look at the inputs to the task that failed. Confirm that the Known___ items look as expected (there is an entry with the current TFM & the current dotnet/runtime dependency version), and look at the source code of the task in dotnet/sdk for hints.

Required changes

• In eng/Versions.props, increment DefaultNetCoreTargetFramework by 1.
• In eng/Versions.props, if and only if the new TFM is LTS, update CurrentLtsTargetFramework to match DefaultNetCoreTargetFramework
• In eng/SourceBuild.props, update SourceBuildTargetFrameworkFilter to include the current TFM.
• Do a global repo search for the current version string, and update almost everything by 1 (e.g. find net8, replace with net9). See the PR linked above for examples - this shouldn't be done blindly, but on a case-by-case basis. Most things should be updated, and most choices should be obvious.
  • Exceptions to this are eng/tools/RepoTasks/RepoTasks.csproj and eng/tools/RepoTasks/RepoTasks.tasks. These build without the workarounds from eng/tools/GenerateFiles/Directory.Build.targets.in, and need to be kept at the previous TFM until we get an SDK containing a runtime with the new TFM. Generally this means we have to hard-code the previous TFM for these files, rather than using DefaultNetCoreTargetFramework.
• Add a reference to the new SiteExtensions package for the previous Major Version.
  1. Add references to src/SiteExtensions/LoggingAggregate/src/Microsoft.AspNetCore.AzureAppServices.SiteExtension/Microsoft.AspNetCore.AzureAppServices.SiteExtension.csproj to Microsoft.AspNetCore.AzureAppServices.SiteExtension.{PreviousMajorVersion}.0.x64 and Microsoft.AspNetCore.AzureAppServices.SiteExtension.{PreviousMajorVersion}.0.x86.
  2. Add entries in eng/Versions.props similar to these - the version should be from the latest released build of .Net.
  3. Add entries in eng/Dependencies.props similar to these.
• Update AssemblyVersions for dotnet/runtime assemblies in src/Framework/test/TestData.cs.
• Update template precedence

  1. Create a PR like this one in dotnet/aspnetcore that updates the precedence, identity, and (if it exists) thirdPartyNotices elements in all template.json files.

     • Make sure to update all template.json files, including project templates and item templates.
     • Going forward, Precedence values should be (9000 + (Major Version) * 100) for 8.0 and 9.0, and (Major Version * 1000) after that.
       • This means 8.0's Precedence should be 9800, 9.0's should be 9900, 10.0's should be 10000, 11.0's should be 11000, and so on.
       • If we need to release a Minor version of any of these, use the first zero digit after the Major version to represent that (e.g. 9810 for 8.1, 10100 for 10.1).

  2. Make sure the new aka.ms link you're referencing in thirdPartyNotices exists.

• In src/Framework/AspNetCoreAnalyzers/test/Verifiers/CSharpRouteHandlerCodeFixVerifier.cs, update the references to ReferenceAssemblies.Net.Netx0 with the latest version.

Validation

• CI must be green.
• Packages produced by the build should be placing assemblies in a folder named after the new TFM.

Ingesting an SDK with the new TFM

Typically we update the SDK we use in main every Monday. Once we have one that contains Microsoft.Netcore.App entries with the new TFM, we can update eng/tools/RepoTasks/RepoTasks.csproj and eng/tools/RepoTasks/RepoTasks.tasks to use DefaultNetCoreTargetFramework again rather than hard-coding the previous TFM.