18 KiB

Исходник Постоянная ссылка Ответственный История

Validating C# Extension for VS Code

Opening projects

When you open a directory in VS Code, the C# extension should look for a .csproj or .sln file in that directory and use "OmniSharp" to load it. If a .cs file is present and no .csproj or .sln file are present, Omnisharp should start but the intellisense should only appear when a change is made to the file. If you look in "Output > Omnisharp Log" a bunch of information should be printed about what copy of MSBuild was used and what projects were load

Project types to test:

Standalone csproj
Directory containing .sln file that references csprojs--projects should be loaded
.NET Core/.NET Standard csproj
(Windows) Desktop .NET projects
Unity projects
A directory containing a .cs file without a csproj/sln. As stated above, intellisense should appear only when a change is made to the file.

The easist way to verify that a project was successfully loaded is to open a .cs file within it and verify that the references codelens indicator appears.

Specific projects to test opening (on all OSes):

dotnet new console in a directory
A more complex dotnet solution, eg. [1]
A console app solution created in Visual Studio

Unity

Follow the directions at https://code.visualstudio.com/docs/other/unity to configure VS Code with unity
Try editing a project like https://github.com/staceyhaffner/SuperSpaceShooter

Intellisense

The completion list in a file contains symbols defined in references and in the file
If you write a documentation comment on a symbol, the completion list displays it

Signature Help

Signature Help shows up in a method call after typing (
Signature help shows documentation for methods and for parameters
Parameter documentation is only shown for the currently active parameter

Quick Info

Hovering over an identifier shows info and documentation

Formatting

The "Format Document" command works
Pressing enter inside a method body automatically indents the new line

Go To Definition

F12 from callsites to definition
Ctrl-Click
Can go to metadata for symbols defined in metadata

Go To Implementation

Ctrl-F12 on virtual member shows implementations

Find All References

Shift-F12 on a symbol shows a reference list

Reference highlighting

Clicking on a symbol name should highlight other references to it in the same file

Colorization

Appropriate colorization of keywords, literals, identifiers

Error squiggles

Introducing an error should show a squiggle in the editor and an error message in the "problems" window
Messages in the "problems" window should appear only once per unique error (see https://github.com/OmniSharp/omnisharp-vscode/issues/1830)

Quick Fixes

Add using should be availble (does not currently suppport adding references)
Generate variable/generate method should show up for missing members
Remove unncessary usings should show up
(this is not an exhaustive list)

Refactorings

Use expression body for methods should be available
Rename file to match type should correctly rename the file. The renamed file should be open after the refactoring
(this is not an exhaustive list)

Code Lens - References

References codelens appears on symbols and shows correct Find All References results

Code Lens - Unit Tests

In unit tests projects, the "run test" and "debug test" codelens appears on test methods
- Clicking runs or debugs the test and prints results to the console
- Breakpoints in a unit test are hit if you "debug test"
"Run All Tests" and "Debug All Tests" code lens buttons will appear on test classes
- Click Run All or Debug All should run/debug all the tests in the class and print a summary
- If you set breakpoints within multiple tests, you should hit each breakpoint as the tests are run

Symbol Finder

Ctrl-T can find symbols by name when you type them
- Symbols have appropriate glyphs

Rename

Rename can rename symbols

File Watching

In a project that uses globbing (.NET Core), use the VS Code file explorer to add a new file next to the csproj. Intellisense/sighelp/etc should be available in the new file
Add a new file and reference a type in it from a different file. Deleting from disk the file containing the referenced type should produce error messages

ASP.NET Core Razor

The Razor experience is available when you open a .cshtml file in a valid OmniSharp project.

To setup a test project to verify on you can do:

Install the latest preview of the .NET Core 3.0 SDK by going to https://github.com/dotnet/core-sdk and picking the appropriate platform specific installer from the Release/3.0.1XX column. The version should be 3.0.0-preview4-nnnnnn.
dotnet new webapp
Open Pages/Index.cshtml

C# Completion

Typing @DateTime.Now and @(DateTime.Now) provides completions throughout typing.
Completion is available for types that exist in the project (i.e. Program)
Typing @model DateTime prompts for completion for the model symbol and the DateTime symbol.

C# Signature Help

Typing @Html.Raw() prompts for signature help inside of the ().

C# Diagnostics

Typing @ThisDoesNotExist results in an error being created and squiggled in the .cshtml file. NOTE: This error squiggly will be misaligned due to known issues.

TagHelper completion

Note that the pipe in the below examples indicates the cursor.

Typing <environment> prompts you with HTML completion for the environment tag and on completion commit auto-completes the closing tag.
Type <cache |, hit ctrl + space, search for asp-vary-by-user, commit the completion. Ensure that it auto-completes the attribute to: <cache asp-vary-by-user.
Type <form |, hit ctrl + space, search for asp-route-..., commit the completion. Ensure that it auto-completes the attribute to: <form asp-route-|="". Type foo and then hit tab. Cursor should be inside of the double quotes: <form asp-route-foo="|".

Razor Diagnostics

Typing @{ <strong> } results in errors. One error should be about the "strong" tag missing a closing tag.
Fixing the error and typing </strong> i.e. @{ <strong></strong> } results in the diagnostic going away.

Known issues:

Error squiggles may be misaligned due to known issues.

Blazor

The Blazor experience is available when you open a .razor file in a valid OmniSharp/Blazor project.

To setup a test project to verify on you can do:

Install the latest preview of the .NET Core 3.0 SDK by going to https://github.com/dotnet/core-sdk and picking the appropriate platform specific installer from the Release/3.0.1XX column. The version should be 3.0.0-preview4-nnnnnn.
dotnet new blazorserverside
Open Pages/Index.razor

C# Completion

Typing @DateTime.Now and @(DateTime.Now) provides completions throughout typing.
Completion is available for types that exist in the project (i.e. Program)
Typing @layout MainLayout prompts for completion for the layout symbol and the MainLayout symbol.

C# Signature Help

Typing @SetParameters() prompts for signature help inside of the ().

C# Diagnostics

When no changes have been performed on Pages/Index.cshtml, there are 0 errors.
Typing @ThisDoesNotExist results in an error being created and squiggled in the .cshtml file.

Components

Typing <Counter> prompts you with HTML completion for the Counter tag and on completion commit auto-completes the closing tag.
- In the completion list that pops up ensure there's also a YourProjectName.Pages.Counter entry in the HTML completion list.
Open Counter.razor, in the @functions { ... } block add:
```
[Parameter]
public int IncrementAmount { get; set; }
```
- Save Counter.razor then wait 5 seconds.
- Go back to Index.razor and type <Counter |, hit ctrl space, search for IncrementAmount attribute, commit the completion. Ensure that it auto-completes to <Counter IncrementAmount="|"
- While inside the IncrementAmount attribute type in, hit ctrl + space, search for int, type ., search for MaxValue commit it, you should have <Counter IncrementAmount="int.MaxValue"
Verify _Imports.razor works as expected:
- Add a new Folder Utilities under the /Pages folder. Within that folder add a Helper.razor file.
- Open the _Imports.razor under the /Pages folder. Add @using YourProjectName.Pages.Utilities
- Go back to Index.razor. Typing <Helper> prompts you with HTML completion for the Helper tag.

Razor Diagnostics

Typing @{ <strong> } results in errors. One error should be about the "strong" tag missing a closing tag.
Fixing the error and typing </strong> i.e. @{ <strong></strong> } results in the diagnostic going away.

Known issues:

Error squiggles may be misaligned due to known issues.

Legacy Razor

The Razor experience is degraded (but no errors) when you open a .cshtml file in a valid OmniSharp/Legacy Razor project. To setup a test project to verify on you can do:

Open Visual Studio
New Project
ASP.NET Web Application (.NET Framework)
Select MVC
OK
Open Views/Home/Index.cshtml

C# Completion / IntelliSense

Typing @DateTime.Now does not result in any C# completion.
Typing @{ var x = DateTime.Now; } does not result in any C# completion.
Typing @model does not result in any Razor directive completion.

C# Diagnostics

There are 0 .cshtml related errors on open.
Typing @ThisDoesNotExist does not result in an error being created.

Html Completion

Verifying Html is needed to ensure the Razor experience is still partially enabled.

Typing <stron results in Html completion with an entry for strong.
Typing <strong> results in a corresponding </strong> being appended
Hitting enter Typing @{} and then hitting enter inbetween the curly braces results in:

@{

}

Razor Project level Information

To verify the project level information for Razor do the following:

Install the latest preview of the .NET Core 3.0 SDK by going to https://github.com/dotnet/core-sdk and picking the appropriate platform specific installer from the Release/3.0.1XX column. The version should be 3.0.0-preview4-nnnnnn.
Verify the obj/Debug/TheTFMOfTheProject folder contains a project.razor.json file (once the project is restored)
Verify the project.razor.json's Configuration section is not set to null.

Verify each of the test projects above's project.razor.json file (ASP.NET Core Razor, Blazor and Legacy Razor) looks something like the following:

ASP.NET Core Razor

{
  "FilePath": "c:\\Users\\JohnDoe\\Projects\\RazorCoreTestApp\\RazorCoreTestApp.csproj",
  "Configuration": {
    "ConfigurationName": "MVC-3.0",
    "LanguageVersion": "3.0",
    "Extensions": [
      {
        "ExtensionName": "MVC-3.0"
      }
    ]
  },
  "ProjectWorkspaceState": {
    "TagHelpers": [ /* LOTS OF ENTRIES HERE */ ],
    "CSharpLanguageVersion": 703 // This may be different
  },
  "RootNamespace": "RazorCoreTestApp",
  "Documents": [ /* LOTS OF ENTRIES HERE */]
}

Blazor

{
  "FilePath": "c:\\Users\\JohnDoe\\Projects\\BlazorTestApp\\BlazorTestApp.csproj",
  "Configuration": {
    "ConfigurationName": "MVC-3.0",
    "LanguageVersion": "MVC-3.0",
    "Extensions": [
      {
        "ExtensionName": "MVC-3.0"
      }
    ]
  },
  "ProjectWorkspaceState": {
    "TagHelpers": [ /* LOTS OF ENTRIES HERE */ ],
    "CSharpLanguageVersion": 703 // This may be different
  },
  "RootNamespace": "BlazorTestApp",
  "Documents": [ /* LOTS OF ENTRIES HERE */]
}

Legacy Razor

{
  "ProjectFilePath": "c:\\Users\\JohnDoe\\Projects\\LegacyRazorTestApp\\LegacyRazorTestApp.csproj",
  "Configuration": {
    "ConfigurationName": "UnsupportedRazor",
    "LanguageVersion": "1.0",
    "Extensions": [
      {
        "ExtensionName": "UnsupportedRazorExtension"
      }
    ]
  },
  "ProjectWorkspaceState": {
    "TagHelpers": [],
    "CSharpLanguageVersion": 703 // This may be different
  },
  "RootNamespace": null,
  "Documents": []
}

Report a Razor issue

Perform the following in any of the above Razor projects.

Run the Report a Razor issue command while razor.trace is set to Off. Ensure that you get a dialog stating that razor.trace must be set to Verbose.
Run the Report a Razor issue command while razor.trace is set to Verbose. Follow the instructions, type a little bit in a .cshtml file when it's recording. Once you stop the recording ensure that the content copied to your clipboard has the following information:
- Razor log output under the Logs section
- The Razor document content under the Workspace information section
- Projected CSharp document under the Workspace information section
- Projected Html document under the Workspace information section
- dotnet --info output under Machine information section
- The table of extensions under the Machine information section

Razor Options

razor.disabled

This option can be set to true to disable the above described C# experiences.

razor.trace

This option should always be displayed in the View --> Output --> Razor Log window This option can be set to any of the following values:

"Off" - Will launch Razor Language server with its log output set to 'Off'. The header in the Razor Log output window will be shown but no other content will be shown.
"Messages" - Will launch Razor Language server with its log output set to 'Messages'. Limited messages will be shown such as "Opening document xyz in project abc".
"Verbose" - Will launch Razor Language server with its log output set to 'Verbose'. All logging messages will be shown such as "123 - Synchronizing documentxyz currently ...."

OmniSharp Options

omnisharp.useGlobalMono (for Linux/Mac)

This option can be set to any of the following values:

"auto" - Will launch OmniSharp using mono if version>=5.2.0 is installed but will launch using the run script if that is not so.
"always" - Will launch OmniSharp using mono if version>=5.2.0 is installed and will throw an error otherwise.
"never" - Launches OmniSharp without using the global mono

The value of OmniSharp path displayed in the OmniSharp log can be used to know if OmniSharp has launched using mono or not. If it is running using global mono, the path will end with "OmniSharp.exe" else the path will end with "run". For using this option, mono version greater than or equal to 5.2.0 must be installed. If that is not so, setting this option to true, should give an error.

If the option is not set, the OmniSharp path displayed in the "OmniSharp Log" should end with "run"
If the option is set, the OmniSharp path as mentioned above should end with "OmniSharp.exe"

omnisharp.path

Setting this path to any of the values as listed below, should start the OmniSharp server and display the correct OmniSharp path in the OmniSharp Log(View --> Output--> OmniSharp Log).

undefined - OmniSharp server must start using the copy of omnisharp shipped with the extension, that is, the OmniSharp path must be the extension path, followed by .omnisharp followed by the default omnisharp version as present in the package.json and the platform-specific executable.
Some absolute path - OmniSharp server must start using the local copy of OmniSharp pointed to by the path and the same must be displayed as the Omnisharp path. Example:C:\omnisharp-roslyn\artifacts\publish\OmniSharp.Stdio\win7-x64\OmniSharp.exe.
"" - The specified version must be downloaded and installed (The status of download/install can be seen in the C# log). If the installation is successful, the server must start and the OmniSharp path must include the .omnisharp folder followed by the version name and the executable. Eg: If the version is 1.29.2-beta.60, the path displayed on Windows should be .omnisharp/1.29.2-beta.60/OmniSharp.exe.
"latest" - The file containing the information about the latest CI build (https://roslynomnisharp.blob.core.windows.net/releases/versioninfo.txt), must be downloaded and accordingly the latest CI build from the "master" branch of omnisharp-roslyn should be downloaded and installed. If the installation is successful, the server must start and the OmniSharp path must include the .omnisharp folder followed by the version name and the executable. Eg: If the latest version is 1.29.2-beta.62, the path displayed on Windows should be .omnisharp/1.29.2-beta.62/OmniSharp.exe.
All the above configurations should work, with and without setting the useMono option on Linux
The above behavior should be exhibited when a new vscode window is opened, as well as if the setting is modified and a "Restart OmniSharp"(Ctrl+Shift+P --> OmniSharp: Restart OmniSharp) is performed.

Status Bar Item

The status bar item(s) must appear on the left side of the VS Code's status bar

When the extension is setting up the dependencies, the status bar item should show "Downloading packages"/"Installing packages".
Once the server has started, there should be two status bar items:
- OmniSharp status Bar item - It should show a green flame (indicating that the OmniSharp server is running) and clicking on it should show the OmniSharp log channel
- Project status bar item - It should show and a folder icon and the name of the currently selected project/solution. Clicking on this element should show a command palette menu to select other projects/solutions in the workspace.

[1] For example,

mkdir project
mkdir test
dotnet new console -o project
dotnet new xunit -o test
dotnet add test\test.csproj reference project\project.csproj
dotnet new solution -n solution
dotnet sln solution.sln add test\test.csproj project\project.csproj

18 KiB Исходник Постоянная ссылка Ответственный История

Validating C# Extension for VS Code

Opening projects

Specific projects to test opening (on all OSes):

Unity

Intellisense

Signature Help

Quick Info

Formatting

Go To Definition

Go To Implementation

Find All References

Reference highlighting

Colorization

Error squiggles

Quick Fixes

Refactorings

Code Lens - References

Code Lens - Unit Tests

Symbol Finder

Rename

File Watching

ASP.NET Core Razor

C# Completion

C# Signature Help

C# Diagnostics

TagHelper completion

Razor Diagnostics

Known issues:

Blazor

C# Completion

C# Signature Help

C# Diagnostics

Components

Razor Diagnostics

Known issues:

Legacy Razor

C# Completion / IntelliSense

C# Diagnostics

Html Completion

Razor Project level Information

ASP.NET Core Razor

Blazor

Legacy Razor

Report a Razor issue

Razor Options

razor.disabled

razor.trace

OmniSharp Options

omnisharp.useGlobalMono (for Linux/Mac)

omnisharp.path

Status Bar Item

18 KiB

Исходник Постоянная ссылка Ответственный История