ruby/rational.c

2762 строки
63 KiB
C
Исходник Обычный вид История

/*
rational.c: Coded by Tadayoshi Funaba 2008-2012
This implementation is based on Keiju Ishitsuka's Rational library
which is written in ruby.
*/
#include "internal.h"
#include "id.h"
#include <math.h>
#include <float.h>
#ifdef HAVE_IEEEFP_H
#include <ieeefp.h>
#endif
#define NDEBUG
#include "ruby_assert.h"
#if defined(HAVE_LIBGMP) && defined(HAVE_GMP_H)
#define USE_GMP
#include <gmp.h>
#endif
#define ZERO INT2FIX(0)
#define ONE INT2FIX(1)
#define TWO INT2FIX(2)
#define GMP_GCD_DIGITS 1
#define INT_POSITIVE_P(x) (FIXNUM_P(x) ? FIXNUM_POSITIVE_P(x) : BIGNUM_POSITIVE_P(x))
#define INT_ZERO_P(x) (FIXNUM_P(x) ? FIXNUM_ZERO_P(x) : rb_bigzero_p(x))
VALUE rb_cRational;
static ID id_abs, id_idiv, id_integer_p,
id_i_num, id_i_den;
#define id_to_i idTo_i
#define f_boolcast(x) ((x) ? Qtrue : Qfalse)
#define f_inspect rb_inspect
#define f_to_s rb_obj_as_string
#define binop(n,op) \
inline static VALUE \
f_##n(VALUE x, VALUE y)\
{\
return rb_funcall(x, (op), 1, y); \
}
#define fun1(n) \
inline static VALUE \
f_##n(VALUE x)\
{\
return rb_funcall(x, id_##n, 0);\
}
inline static VALUE
f_add(VALUE x, VALUE y)
{
if (FIXNUM_ZERO_P(y))
return x;
if (FIXNUM_ZERO_P(x))
return y;
return rb_funcall(x, '+', 1, y);
}
inline static VALUE
f_div(VALUE x, VALUE y)
{
if (y == ONE)
return x;
if (RB_INTEGER_TYPE_P(x))
return rb_int_div(x, y);
return rb_funcall(x, '/', 1, y);
}
inline static int
f_lt_p(VALUE x, VALUE y)
{
if (FIXNUM_P(x) && FIXNUM_P(y))
return (SIGNED_VALUE)x < (SIGNED_VALUE)y;
return RTEST(rb_funcall(x, '<', 1, y));
}
#ifndef NDEBUG
/* f_mod is used only in f_gcd defined when NDEBUG is not defined */
binop(mod, '%')
#endif
inline static VALUE
f_mul(VALUE x, VALUE y)
{
if (FIXNUM_ZERO_P(y) && RB_INTEGER_TYPE_P(x))
return ZERO;
if (y == ONE) return x;
if (FIXNUM_ZERO_P(x) && RB_INTEGER_TYPE_P(y))
return ZERO;
if (x == ONE) return y;
else if (RB_INTEGER_TYPE_P(x))
return rb_int_mul(x, y);
return rb_funcall(x, '*', 1, y);
}
inline static VALUE
f_sub(VALUE x, VALUE y)
{
if (FIXNUM_P(y) && FIXNUM_ZERO_P(y))
return x;
return rb_funcall(x, '-', 1, y);
}
inline static VALUE
f_abs(VALUE x)
{
if (RB_INTEGER_TYPE_P(x))
return rb_int_abs(x);
return rb_funcall(x, id_abs, 0);
}
fun1(integer_p)
inline static VALUE
f_to_i(VALUE x)
{
if (RB_TYPE_P(x, T_STRING))
return rb_str_to_inum(x, 10, 0);
return rb_funcall(x, id_to_i, 0);
}
inline static VALUE
f_eqeq_p(VALUE x, VALUE y)
{
if (FIXNUM_P(x) && FIXNUM_P(y))
return x == y;
return (int)rb_equal(x, y);
}
inline static VALUE
f_idiv(VALUE x, VALUE y)
{
if (RB_INTEGER_TYPE_P(x))
return rb_int_idiv(x, y);
return rb_funcall(x, id_idiv, 1, y);
}
#define f_expt10(x) rb_int_pow(INT2FIX(10), x)
inline static int
f_zero_p(VALUE x)
{
if (RB_INTEGER_TYPE_P(x)) {
return FIXNUM_ZERO_P(x);
}
else if (RB_TYPE_P(x, T_RATIONAL)) {
VALUE num = RRATIONAL(x)->num;
return FIXNUM_ZERO_P(num);
}
return (int)rb_equal(x, ZERO);
}
#define f_nonzero_p(x) (!f_zero_p(x))
inline static int
f_one_p(VALUE x)
{
if (RB_INTEGER_TYPE_P(x)) {
return x == LONG2FIX(1);
}
else if (RB_TYPE_P(x, T_RATIONAL)) {
VALUE num = RRATIONAL(x)->num;
VALUE den = RRATIONAL(x)->den;
return num == LONG2FIX(1) && den == LONG2FIX(1);
}
return (int)rb_equal(x, ONE);
}
inline static int
f_minus_one_p(VALUE x)
{
if (RB_INTEGER_TYPE_P(x)) {
return x == LONG2FIX(-1);
}
else if (RB_TYPE_P(x, T_BIGNUM)) {
return Qfalse;
}
else if (RB_TYPE_P(x, T_RATIONAL)) {
VALUE num = RRATIONAL(x)->num;
VALUE den = RRATIONAL(x)->den;
return num == LONG2FIX(-1) && den == LONG2FIX(1);
}
return (int)rb_equal(x, INT2FIX(-1));
}
inline static int
f_kind_of_p(VALUE x, VALUE c)
{
return (int)rb_obj_is_kind_of(x, c);
}
inline static int
k_numeric_p(VALUE x)
{
return f_kind_of_p(x, rb_cNumeric);
}
inline static int
k_integer_p(VALUE x)
{
return RB_INTEGER_TYPE_P(x);
}
inline static int
k_float_p(VALUE x)
{
return RB_FLOAT_TYPE_P(x);
}
inline static int
k_rational_p(VALUE x)
{
return RB_TYPE_P(x, T_RATIONAL);
}
#define k_exact_p(x) (!k_float_p(x))
#define k_inexact_p(x) k_float_p(x)
#define k_exact_zero_p(x) (k_exact_p(x) && f_zero_p(x))
#define k_exact_one_p(x) (k_exact_p(x) && f_one_p(x))
#ifdef USE_GMP
VALUE
rb_gcd_gmp(VALUE x, VALUE y)
{
const size_t nails = (sizeof(BDIGIT)-SIZEOF_BDIGIT)*CHAR_BIT;
mpz_t mx, my, mz;
size_t count;
VALUE z;
long zn;
mpz_init(mx);
mpz_init(my);
mpz_init(mz);
mpz_import(mx, BIGNUM_LEN(x), -1, sizeof(BDIGIT), 0, nails, BIGNUM_DIGITS(x));
mpz_import(my, BIGNUM_LEN(y), -1, sizeof(BDIGIT), 0, nails, BIGNUM_DIGITS(y));
mpz_gcd(mz, mx, my);
mpz_clear(mx);
mpz_clear(my);
zn = (mpz_sizeinbase(mz, 16) + SIZEOF_BDIGIT*2 - 1) / (SIZEOF_BDIGIT*2);
z = rb_big_new(zn, 1);
mpz_export(BIGNUM_DIGITS(z), &count, -1, sizeof(BDIGIT), 0, nails, mz);
mpz_clear(mz);
return rb_big_norm(z);
}
#endif
#ifndef NDEBUG
#define f_gcd f_gcd_orig
#endif
inline static long
i_gcd(long x, long y)
{
Improve performance of some Time & Rational methods rational.c (i_gcd): replace GCD algorithm from Euclidean algorithm to Stein algorithm (https://en.wikipedia.org/wiki/Binary_GCD_algorithm). Some Time methods will call internal quov() function and it calls Rational#quo -> f_muldiv() -> i_gcd() in rational.c And some Rational methods also call i_gcd(). The implementation of Euclidean algorithm spent a long time at modulo operation (ie "x = y % x;"). The Stein algorithm will replace with shift operation which is faster than modulo. Time#subsec -> 36 % up Time#to_r -> 26 % up Rational#+ -> 14 % up Rational#- -> 15 % up Rational#* -> 13 % up [ruby-core:80843] [Bug #13503] [Fix GH-1596] ### Before Time#subsec 2.142M (± 9.8%) i/s - 10.659M in 5.022659s Time#to_r 2.003M (± 9.1%) i/s - 9.959M in 5.012445s Rational#+ 3.843M (± 0.9%) i/s - 19.274M in 5.016254s Rational#- 3.820M (± 1.3%) i/s - 19.149M in 5.014137s Rational#* 5.198M (± 1.4%) i/s - 26.016M in 5.005664s * After Time#subsec 2.902M (± 2.9%) i/s - 14.505M in 5.001815s Time#to_r 2.503M (± 4.8%) i/s - 12.512M in 5.011454s Rational#+ 4.390M (± 1.2%) i/s - 22.001M in 5.012413s Rational#- 4.391M (± 1.2%) i/s - 22.013M in 5.014584s Rational#* 5.872M (± 2.2%) i/s - 29.369M in 5.003666s * Test code require 'benchmark/ips' Benchmark.ips do |x| x.report "Time#subsec" do |t| time = Time.now t.times { time.subsec } end x.report "Time#to_r" do |t| time = Time.now t.times { time.to_r } end x.report "Rational#+" do |t| rat1 = 1/2r rat2 = 1/3r t.times { rat1 + rat2 } end x.report "Rational#-" do |t| rat1 = 1/3r rat2 = 1/2r t.times { rat1 - rat2 } end x.report "Rational#*" do |t| rat1 = 1/3r rat2 = 1/2r t.times { rat1 * rat2 } end end git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58922 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
2017-05-27 08:41:02 +03:00
unsigned long u, v, t;
int shift;
if (x < 0)
x = -x;
if (y < 0)
y = -y;
if (x == 0)
return y;
if (y == 0)
return x;
Improve performance of some Time & Rational methods rational.c (i_gcd): replace GCD algorithm from Euclidean algorithm to Stein algorithm (https://en.wikipedia.org/wiki/Binary_GCD_algorithm). Some Time methods will call internal quov() function and it calls Rational#quo -> f_muldiv() -> i_gcd() in rational.c And some Rational methods also call i_gcd(). The implementation of Euclidean algorithm spent a long time at modulo operation (ie "x = y % x;"). The Stein algorithm will replace with shift operation which is faster than modulo. Time#subsec -> 36 % up Time#to_r -> 26 % up Rational#+ -> 14 % up Rational#- -> 15 % up Rational#* -> 13 % up [ruby-core:80843] [Bug #13503] [Fix GH-1596] ### Before Time#subsec 2.142M (± 9.8%) i/s - 10.659M in 5.022659s Time#to_r 2.003M (± 9.1%) i/s - 9.959M in 5.012445s Rational#+ 3.843M (± 0.9%) i/s - 19.274M in 5.016254s Rational#- 3.820M (± 1.3%) i/s - 19.149M in 5.014137s Rational#* 5.198M (± 1.4%) i/s - 26.016M in 5.005664s * After Time#subsec 2.902M (± 2.9%) i/s - 14.505M in 5.001815s Time#to_r 2.503M (± 4.8%) i/s - 12.512M in 5.011454s Rational#+ 4.390M (± 1.2%) i/s - 22.001M in 5.012413s Rational#- 4.391M (± 1.2%) i/s - 22.013M in 5.014584s Rational#* 5.872M (± 2.2%) i/s - 29.369M in 5.003666s * Test code require 'benchmark/ips' Benchmark.ips do |x| x.report "Time#subsec" do |t| time = Time.now t.times { time.subsec } end x.report "Time#to_r" do |t| time = Time.now t.times { time.to_r } end x.report "Rational#+" do |t| rat1 = 1/2r rat2 = 1/3r t.times { rat1 + rat2 } end x.report "Rational#-" do |t| rat1 = 1/3r rat2 = 1/2r t.times { rat1 - rat2 } end x.report "Rational#*" do |t| rat1 = 1/3r rat2 = 1/2r t.times { rat1 * rat2 } end end git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58922 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
2017-05-27 08:41:02 +03:00
u = (unsigned long)x;
v = (unsigned long)y;
for (shift = 0; ((u | v) & 1) == 0; ++shift) {
u >>= 1;
v >>= 1;
}
Improve performance of some Time & Rational methods rational.c (i_gcd): replace GCD algorithm from Euclidean algorithm to Stein algorithm (https://en.wikipedia.org/wiki/Binary_GCD_algorithm). Some Time methods will call internal quov() function and it calls Rational#quo -> f_muldiv() -> i_gcd() in rational.c And some Rational methods also call i_gcd(). The implementation of Euclidean algorithm spent a long time at modulo operation (ie "x = y % x;"). The Stein algorithm will replace with shift operation which is faster than modulo. Time#subsec -> 36 % up Time#to_r -> 26 % up Rational#+ -> 14 % up Rational#- -> 15 % up Rational#* -> 13 % up [ruby-core:80843] [Bug #13503] [Fix GH-1596] ### Before Time#subsec 2.142M (± 9.8%) i/s - 10.659M in 5.022659s Time#to_r 2.003M (± 9.1%) i/s - 9.959M in 5.012445s Rational#+ 3.843M (± 0.9%) i/s - 19.274M in 5.016254s Rational#- 3.820M (± 1.3%) i/s - 19.149M in 5.014137s Rational#* 5.198M (± 1.4%) i/s - 26.016M in 5.005664s * After Time#subsec 2.902M (± 2.9%) i/s - 14.505M in 5.001815s Time#to_r 2.503M (± 4.8%) i/s - 12.512M in 5.011454s Rational#+ 4.390M (± 1.2%) i/s - 22.001M in 5.012413s Rational#- 4.391M (± 1.2%) i/s - 22.013M in 5.014584s Rational#* 5.872M (± 2.2%) i/s - 29.369M in 5.003666s * Test code require 'benchmark/ips' Benchmark.ips do |x| x.report "Time#subsec" do |t| time = Time.now t.times { time.subsec } end x.report "Time#to_r" do |t| time = Time.now t.times { time.to_r } end x.report "Rational#+" do |t| rat1 = 1/2r rat2 = 1/3r t.times { rat1 + rat2 } end x.report "Rational#-" do |t| rat1 = 1/3r rat2 = 1/2r t.times { rat1 - rat2 } end x.report "Rational#*" do |t| rat1 = 1/3r rat2 = 1/2r t.times { rat1 * rat2 } end end git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@58922 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
2017-05-27 08:41:02 +03:00
while ((u & 1) == 0)
u >>= 1;
do {
while ((v & 1) == 0)
v >>= 1;
if (u > v) {
t = v;
v = u;
u = t;
}
v = v - u;
} while (v != 0);
return (long)(u << shift);
}
inline static VALUE
f_gcd_normal(VALUE x, VALUE y)
{
VALUE z;
if (FIXNUM_P(x) && FIXNUM_P(y))
return LONG2NUM(i_gcd(FIX2LONG(x), FIX2LONG(y)));
if (INT_NEGATIVE_P(x))
x = rb_int_uminus(x);
if (INT_NEGATIVE_P(y))
y = rb_int_uminus(y);
if (INT_ZERO_P(x))
return y;
if (INT_ZERO_P(y))
return x;
for (;;) {
if (FIXNUM_P(x)) {
if (FIXNUM_ZERO_P(x))
return y;
if (FIXNUM_P(y))
return LONG2NUM(i_gcd(FIX2LONG(x), FIX2LONG(y)));
}
z = x;
x = rb_int_modulo(y, x);
y = z;
}
/* NOTREACHED */
}
VALUE
rb_gcd_normal(VALUE x, VALUE y)
{
return f_gcd_normal(x, y);
}
inline static VALUE
f_gcd(VALUE x, VALUE y)
{
#ifdef USE_GMP
if (RB_TYPE_P(x, T_BIGNUM) && RB_TYPE_P(y, T_BIGNUM)) {
size_t xn = BIGNUM_LEN(x);
size_t yn = BIGNUM_LEN(y);
if (GMP_GCD_DIGITS <= xn || GMP_GCD_DIGITS <= yn)
return rb_gcd_gmp(x, y);
}
#endif
return f_gcd_normal(x, y);
}
#ifndef NDEBUG
#undef f_gcd
inline static VALUE
f_gcd(VALUE x, VALUE y)
{
VALUE r = f_gcd_orig(x, y);
if (f_nonzero_p(r)) {
assert(f_zero_p(f_mod(x, r)));
assert(f_zero_p(f_mod(y, r)));
}
return r;
}
#endif
inline static VALUE
f_lcm(VALUE x, VALUE y)
{
if (INT_ZERO_P(x) || INT_ZERO_P(y))
return ZERO;
return f_abs(f_mul(f_div(x, f_gcd(x, y)), y));
}
#define get_dat1(x) \
struct RRational *dat = RRATIONAL(x)
#define get_dat2(x,y) \
struct RRational *adat = RRATIONAL(x), *bdat = RRATIONAL(y)
#define RRATIONAL_SET_NUM(rat, n) RB_OBJ_WRITE((rat), &((struct RRational *)(rat))->num,(n))
#define RRATIONAL_SET_DEN(rat, d) RB_OBJ_WRITE((rat), &((struct RRational *)(rat))->den,(d))
inline static VALUE
nurat_s_new_internal(VALUE klass, VALUE num, VALUE den)
{
* gc.c: support RGENGC. [ruby-trunk - Feature #8339] See this ticet about RGENGC. * gc.c: Add several flags: * RGENGC_DEBUG: if >0, then prints debug information. * RGENGC_CHECK_MODE: if >0, add assertions. * RGENGC_PROFILE: if >0, add profiling features. check GC.stat and GC::Profiler. * include/ruby/ruby.h: disable RGENGC by default (USE_RGENGC == 0). * array.c: add write barriers for T_ARRAY and generate sunny objects. * include/ruby/ruby.h (RARRAY_PTR_USE): added. Use this macro if you want to access raw pointers. If you modify the contents which pointer pointed, then you need to care write barrier. * bignum.c, marshal.c, random.c: generate T_BIGNUM sunny objects. * complex.c, include/ruby/ruby.h: add write barriers for T_COMPLEX and generate sunny objects. * rational.c (nurat_s_new_internal), include/ruby/ruby.h: add write barriers for T_RATIONAL and generate sunny objects. * internal.h: add write barriers for RBasic::klass. * numeric.c (rb_float_new_in_heap): generate sunny T_FLOAT objects. * object.c (rb_class_allocate_instance), range.c: generate sunny T_OBJECT objects. * string.c: add write barriers for T_STRING and generate sunny objects. * variable.c: add write barriers for ivars. * vm_insnhelper.c (vm_setivar): ditto. * include/ruby/ruby.h, debug.c: use two flags FL_WB_PROTECTED and FL_OLDGEN. * node.h (NODE_FL_CREF_PUSHED_BY_EVAL, NODE_FL_CREF_OMOD_SHARED): move flag bits. git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@40703 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
2013-05-13 22:07:47 +04:00
NEWOBJ_OF(obj, struct RRational, klass, T_RATIONAL | (RGENGC_WB_PROTECTED_RATIONAL ? FL_WB_PROTECTED : 0));
RRATIONAL_SET_NUM(obj, num);
RRATIONAL_SET_DEN(obj, den);
OBJ_FREEZE_RAW(obj);
return (VALUE)obj;
}
static VALUE
nurat_s_alloc(VALUE klass)
{
return nurat_s_new_internal(klass, ZERO, ONE);
}
inline static VALUE
f_rational_new_bang1(VALUE klass, VALUE x)
{
return nurat_s_new_internal(klass, x, ONE);
}
#ifdef CANONICALIZATION_FOR_MATHN
static int canonicalization = 0;
RUBY_FUNC_EXPORTED void
nurat_canonicalization(int f)
{
canonicalization = f;
}
#else
# define canonicalization 0
#endif
inline static void
nurat_int_check(VALUE num)
{
if (!RB_INTEGER_TYPE_P(num)) {
if (!k_numeric_p(num) || !f_integer_p(num))
rb_raise(rb_eTypeError, "not an integer");
}
}
inline static VALUE
nurat_int_value(VALUE num)
{
nurat_int_check(num);
if (!k_integer_p(num))
num = f_to_i(num);
return num;
}
static void
nurat_canonicalize(VALUE *num, VALUE *den)
{
assert(num != NULL && RB_INTEGER_TYPE_P(*num));
assert(den != NULL && RB_INTEGER_TYPE_P(*den));
if (INT_NEGATIVE_P(*den)) {
*num = rb_int_uminus(*num);
*den = rb_int_uminus(*den);
}
else if (INT_ZERO_P(*den)) {
rb_num_zerodiv();
}
}
static void
nurat_reduce(VALUE *x, VALUE *y)
{
VALUE gcd;
if (*x == ONE || *y == ONE) return;
gcd = f_gcd(*x, *y);
*x = f_idiv(*x, gcd);
*y = f_idiv(*y, gcd);
}
inline static VALUE
nurat_s_canonicalize_internal(VALUE klass, VALUE num, VALUE den)
{
nurat_canonicalize(&num, &den);
nurat_reduce(&num, &den);
if (canonicalization && f_one_p(den))
return num;
return nurat_s_new_internal(klass, num, den);
}
inline static VALUE
nurat_s_canonicalize_internal_no_reduce(VALUE klass, VALUE num, VALUE den)
{
nurat_canonicalize(&num, &den);
if (canonicalization && f_one_p(den))
return num;
return nurat_s_new_internal(klass, num, den);
}
static VALUE
nurat_s_new(int argc, VALUE *argv, VALUE klass)
{
VALUE num, den;
switch (rb_scan_args(argc, argv, "11", &num, &den)) {
case 1:
num = nurat_int_value(num);
den = ONE;
break;
default:
num = nurat_int_value(num);
den = nurat_int_value(den);
break;
}
return nurat_s_canonicalize_internal(klass, num, den);
}
inline static VALUE
f_rational_new2(VALUE klass, VALUE x, VALUE y)
{
assert(!k_rational_p(x));
assert(!k_rational_p(y));
return nurat_s_canonicalize_internal(klass, x, y);
}
inline static VALUE
f_rational_new_no_reduce2(VALUE klass, VALUE x, VALUE y)
{
assert(!k_rational_p(x));
assert(!k_rational_p(y));
return nurat_s_canonicalize_internal_no_reduce(klass, x, y);
}
static VALUE nurat_convert(VALUE klass, VALUE numv, VALUE denv, int raise);
static VALUE nurat_s_convert(int argc, VALUE *argv, VALUE klass);
/*
* call-seq:
* Rational(x, y) -> rational
* Rational(arg) -> rational
*
* Returns +x/y+ or +arg+ as a Rational.
*
* Rational(2, 3) #=> (2/3)
* Rational(5) #=> (5/1)
* Rational(0.5) #=> (1/2)
* Rational(0.3) #=> (5404319552844595/18014398509481984)
*
* Rational("2/3") #=> (2/3)
* Rational("0.3") #=> (3/10)
*
* Rational("10 cents") #=> ArgumentError
* Rational(nil) #=> TypeError
* Rational(1, nil) #=> TypeError
*
* Syntax of the string form:
*
* string form = extra spaces , rational , extra spaces ;
* rational = [ sign ] , unsigned rational ;
* unsigned rational = numerator | numerator , "/" , denominator ;
* numerator = integer part | fractional part | integer part , fractional part ;
* denominator = digits ;
* integer part = digits ;
* fractional part = "." , digits , [ ( "e" | "E" ) , [ sign ] , digits ] ;
* sign = "-" | "+" ;
* digits = digit , { digit | "_" , digit } ;
* digit = "0" | "1" | "2" | "3" | "4" | "5" | "6" | "7" | "8" | "9" ;
* extra spaces = ? \s* ? ;
*
* See also String#to_r.
*/
static VALUE
nurat_f_rational(int argc, VALUE *argv, VALUE klass)
{
VALUE a1, a2, opts = Qnil;
int raise = TRUE;
if (rb_scan_args(argc, argv, "11:", &a1, &a2, &opts) == 1) {
a2 = Qundef;
}
if (!NIL_P(opts)) {
static ID kwds[1];
VALUE exception;
if (!kwds[0]) {
kwds[0] = rb_intern_const("exception");
}
rb_get_kwargs(opts, kwds, 0, 1, &exception);
raise = (exception != Qfalse);
}
return nurat_convert(rb_cRational, a1, a2, raise);
}
/*
* call-seq:
* rat.numerator -> integer
*
* Returns the numerator.
*
* Rational(7).numerator #=> 7
* Rational(7, 1).numerator #=> 7
* Rational(9, -4).numerator #=> -9
* Rational(-2, -10).numerator #=> 1
*/
static VALUE
nurat_numerator(VALUE self)
{
get_dat1(self);
return dat->num;
}
/*
* call-seq:
* rat.denominator -> integer
*
* Returns the denominator (always positive).
*
* Rational(7).denominator #=> 1
* Rational(7, 1).denominator #=> 1
* Rational(9, -4).denominator #=> 4
* Rational(-2, -10).denominator #=> 5
*/
static VALUE
nurat_denominator(VALUE self)
{
get_dat1(self);
return dat->den;
}
/*
* call-seq:
* -rat -> rational
*
* Negates +rat+.
*/
VALUE
rb_rational_uminus(VALUE self)
{
const int unused = (assert(RB_TYPE_P(self, T_RATIONAL)), 0);
get_dat1(self);
(void)unused;
return f_rational_new2(CLASS_OF(self), rb_int_uminus(dat->num), dat->den);
}
#ifndef NDEBUG
#define f_imul f_imul_orig
#endif
inline static VALUE
f_imul(long a, long b)
{
VALUE r;
if (a == 0 || b == 0)
return ZERO;
else if (a == 1)
return LONG2NUM(b);
else if (b == 1)
return LONG2NUM(a);
if (MUL_OVERFLOW_LONG_P(a, b))
r = rb_big_mul(rb_int2big(a), rb_int2big(b));
else
r = LONG2NUM(a * b);
return r;
}
#ifndef NDEBUG
#undef f_imul
inline static VALUE
f_imul(long x, long y)
{
VALUE r = f_imul_orig(x, y);
assert(f_eqeq_p(r, f_mul(LONG2NUM(x), LONG2NUM(y))));
return r;
}
#endif
inline static VALUE
f_addsub(VALUE self, VALUE anum, VALUE aden, VALUE bnum, VALUE bden, int k)
{
VALUE num, den;
if (FIXNUM_P(anum) && FIXNUM_P(aden) &&
FIXNUM_P(bnum) && FIXNUM_P(bden)) {
long an = FIX2LONG(anum);
long ad = FIX2LONG(aden);
long bn = FIX2LONG(bnum);
long bd = FIX2LONG(bden);
long ig = i_gcd(ad, bd);
VALUE g = LONG2NUM(ig);
VALUE a = f_imul(an, bd / ig);
VALUE b = f_imul(bn, ad / ig);
VALUE c;
if (k == '+')
c = rb_int_plus(a, b);
else
c = rb_int_minus(a, b);
b = rb_int_idiv(aden, g);
g = f_gcd(c, g);
num = rb_int_idiv(c, g);
a = rb_int_idiv(bden, g);
den = rb_int_mul(a, b);
}
else {
VALUE g = f_gcd(aden, bden);
VALUE a = rb_int_mul(anum, rb_int_idiv(bden, g));
VALUE b = rb_int_mul(bnum, rb_int_idiv(aden, g));
VALUE c;
if (k == '+')
c = rb_int_plus(a, b);
else
c = rb_int_minus(a, b);
b = rb_int_idiv(aden, g);
g = f_gcd(c, g);
num = rb_int_idiv(c, g);
a = rb_int_idiv(bden, g);
den = rb_int_mul(a, b);
}
return f_rational_new_no_reduce2(CLASS_OF(self), num, den);
}
static double nurat_to_double(VALUE self);
/*
* call-seq:
* rat + numeric -> numeric
*
* Performs addition.
*
* Rational(2, 3) + Rational(2, 3) #=> (4/3)
* Rational(900) + Rational(1) #=> (901/1)
* Rational(-2, 9) + Rational(-9, 2) #=> (-85/18)
* Rational(9, 8) + 4 #=> (41/8)
* Rational(20, 9) + 9.8 #=> 12.022222222222222
*/
VALUE
rb_rational_plus(VALUE self, VALUE other)
{
if (RB_INTEGER_TYPE_P(other)) {
{
get_dat1(self);
return f_rational_new_no_reduce2(CLASS_OF(self),
rb_int_plus(dat->num, rb_int_mul(other, dat->den)),
dat->den);
}
}
else if (RB_FLOAT_TYPE_P(other)) {
return DBL2NUM(nurat_to_double(self) + RFLOAT_VALUE(other));
}
else if (RB_TYPE_P(other, T_RATIONAL)) {
{
get_dat2(self, other);
return f_addsub(self,
adat->num, adat->den,
bdat->num, bdat->den, '+');
}
}
else {
return rb_num_coerce_bin(self, other, '+');
}
}
/*
* call-seq:
* rat - numeric -> numeric
*
* Performs subtraction.
*
* Rational(2, 3) - Rational(2, 3) #=> (0/1)
* Rational(900) - Rational(1) #=> (899/1)
* Rational(-2, 9) - Rational(-9, 2) #=> (77/18)
* Rational(9, 8) - 4 #=> (-23/8)
* Rational(20, 9) - 9.8 #=> -7.577777777777778
*/
static VALUE
nurat_sub(VALUE self, VALUE other)
{
if (RB_INTEGER_TYPE_P(other)) {
{
get_dat1(self);
return f_rational_new_no_reduce2(CLASS_OF(self),
rb_int_minus(dat->num, rb_int_mul(other, dat->den)),
dat->den);
}
}
else if (RB_FLOAT_TYPE_P(other)) {
return DBL2NUM(nurat_to_double(self) - RFLOAT_VALUE(other));
}
else if (RB_TYPE_P(other, T_RATIONAL)) {
{
get_dat2(self, other);
return f_addsub(self,
adat->num, adat->den,
bdat->num, bdat->den, '-');
}
}
else {
return rb_num_coerce_bin(self, other, '-');
}
}
inline static VALUE
f_muldiv(VALUE self, VALUE anum, VALUE aden, VALUE bnum, VALUE bden, int k)
{
VALUE num, den;
assert(RB_TYPE_P(self, T_RATIONAL));
assert(RB_INTEGER_TYPE_P(anum));
assert(RB_INTEGER_TYPE_P(aden));
assert(RB_INTEGER_TYPE_P(bnum));
assert(RB_INTEGER_TYPE_P(bden));
if (k == '/') {
VALUE t;
if (INT_NEGATIVE_P(bnum)) {
anum = rb_int_uminus(anum);
bnum = rb_int_uminus(bnum);
}
t = bnum;
bnum = bden;
bden = t;
}
if (FIXNUM_P(anum) && FIXNUM_P(aden) &&
FIXNUM_P(bnum) && FIXNUM_P(bden)) {
long an = FIX2LONG(anum);
long ad = FIX2LONG(aden);
long bn = FIX2LONG(bnum);
long bd = FIX2LONG(bden);
long g1 = i_gcd(an, bd);
long g2 = i_gcd(ad, bn);
num = f_imul(an / g1, bn / g2);
den = f_imul(ad / g2, bd / g1);
}
else {
VALUE g1 = f_gcd(anum, bden);
VALUE g2 = f_gcd(aden, bnum);
num = rb_int_mul(rb_int_idiv(anum, g1), rb_int_idiv(bnum, g2));
den = rb_int_mul(rb_int_idiv(aden, g2), rb_int_idiv(bden, g1));
}
return f_rational_new_no_reduce2(CLASS_OF(self), num, den);
}
/*
* call-seq:
* rat * numeric -> numeric
*
* Performs multiplication.
*
* Rational(2, 3) * Rational(2, 3) #=> (4/9)
* Rational(900) * Rational(1) #=> (900/1)
* Rational(-2, 9) * Rational(-9, 2) #=> (1/1)
* Rational(9, 8) * 4 #=> (9/2)
* Rational(20, 9) * 9.8 #=> 21.77777777777778
*/
static VALUE
nurat_mul(VALUE self, VALUE other)
{
if (RB_INTEGER_TYPE_P(other)) {
{
get_dat1(self);
return f_muldiv(self,
dat->num, dat->den,
other, ONE, '*');
}
}
else if (RB_FLOAT_TYPE_P(other)) {
return DBL2NUM(nurat_to_double(self) * RFLOAT_VALUE(other));
}
else if (RB_TYPE_P(other, T_RATIONAL)) {
{
get_dat2(self, other);
return f_muldiv(self,
adat->num, adat->den,
bdat->num, bdat->den, '*');
}
}
else {
return rb_num_coerce_bin(self, other, '*');
}
}
/*
* call-seq:
* rat / numeric -> numeric
* rat.quo(numeric) -> numeric
*
* Performs division.
*
* Rational(2, 3) / Rational(2, 3) #=> (1/1)
* Rational(900) / Rational(1) #=> (900/1)
* Rational(-2, 9) / Rational(-9, 2) #=> (4/81)
* Rational(9, 8) / 4 #=> (9/32)
* Rational(20, 9) / 9.8 #=> 0.22675736961451246
*/
static VALUE
nurat_div(VALUE self, VALUE other)
{
if (RB_INTEGER_TYPE_P(other)) {
if (f_zero_p(other))
rb_num_zerodiv();
{
get_dat1(self);
return f_muldiv(self,
dat->num, dat->den,
other, ONE, '/');
}
}
else if (RB_FLOAT_TYPE_P(other))
return DBL2NUM(nurat_to_double(self) / RFLOAT_VALUE(other));
else if (RB_TYPE_P(other, T_RATIONAL)) {
if (f_zero_p(other))
rb_num_zerodiv();
{
get_dat2(self, other);
if (f_one_p(self))
return f_rational_new_no_reduce2(CLASS_OF(self),
bdat->den, bdat->num);
return f_muldiv(self,
adat->num, adat->den,
bdat->num, bdat->den, '/');
}
}
else {
return rb_num_coerce_bin(self, other, '/');
}
}
static VALUE nurat_to_f(VALUE self);
/*
* call-seq:
* rat.fdiv(numeric) -> float
*
* Performs division and returns the value as a Float.
*
* Rational(2, 3).fdiv(1) #=> 0.6666666666666666
* Rational(2, 3).fdiv(0.5) #=> 1.3333333333333333
* Rational(2).fdiv(3) #=> 0.6666666666666666
*/
static VALUE
nurat_fdiv(VALUE self, VALUE other)
{
VALUE div;
if (f_zero_p(other))
return DBL2NUM(nurat_to_double(self) / 0.0);
if (FIXNUM_P(other) && other == LONG2FIX(1))
return nurat_to_f(self);
div = nurat_div(self, other);
if (RB_TYPE_P(div, T_RATIONAL))
return nurat_to_f(div);
if (RB_FLOAT_TYPE_P(div))
return div;
return rb_funcall(div, idTo_f, 0);
}
inline static VALUE
f_odd_p(VALUE integer)
{
if (rb_funcall(integer, '%', 1, INT2FIX(2)) != INT2FIX(0)) {
return Qtrue;
}
return Qfalse;
}
/*
* call-seq:
* rat ** numeric -> numeric
*
* Performs exponentiation.
*
* Rational(2) ** Rational(3) #=> (8/1)
* Rational(10) ** -2 #=> (1/100)
* Rational(10) ** -2.0 #=> 0.01
* Rational(-4) ** Rational(1, 2) #=> (0.0+2.0i)
* Rational(1, 2) ** 0 #=> (1/1)
* Rational(1, 2) ** 0.0 #=> 1.0
*/
static VALUE
nurat_expt(VALUE self, VALUE other)
{
if (k_numeric_p(other) && k_exact_zero_p(other))
return f_rational_new_bang1(CLASS_OF(self), ONE);
if (k_rational_p(other)) {
get_dat1(other);
if (f_one_p(dat->den))
other = dat->num; /* c14n */
}
/* Deal with special cases of 0**n and 1**n */
if (k_numeric_p(other) && k_exact_p(other)) {
get_dat1(self);
if (f_one_p(dat->den)) {
if (f_one_p(dat->num)) {
return f_rational_new_bang1(CLASS_OF(self), ONE);
}
else if (f_minus_one_p(dat->num) && RB_INTEGER_TYPE_P(other)) {
return f_rational_new_bang1(CLASS_OF(self), INT2FIX(f_odd_p(other) ? -1 : 1));
}
else if (INT_ZERO_P(dat->num)) {
if (rb_num_negative_p(other)) {
rb_num_zerodiv();
}
else {
return f_rational_new_bang1(CLASS_OF(self), ZERO);
}
}
}
}
/* General case */
if (FIXNUM_P(other)) {
{
VALUE num, den;
get_dat1(self);
if (INT_POSITIVE_P(other)) {
num = rb_int_pow(dat->num, other);
den = rb_int_pow(dat->den, other);
}
else if (INT_NEGATIVE_P(other)) {
num = rb_int_pow(dat->den, rb_int_uminus(other));
den = rb_int_pow(dat->num, rb_int_uminus(other));
}
else {
num = ONE;
den = ONE;
}
if (RB_FLOAT_TYPE_P(num)) { /* infinity due to overflow */
if (RB_FLOAT_TYPE_P(den))
return DBL2NUM(nan(""));
return num;
}
if (RB_FLOAT_TYPE_P(den)) { /* infinity due to overflow */
num = ZERO;
den = ONE;
}
return f_rational_new2(CLASS_OF(self), num, den);
}
}
else if (RB_TYPE_P(other, T_BIGNUM)) {
rb_warn("in a**b, b may be too big");
return rb_float_pow(nurat_to_f(self), other);
}
else if (RB_FLOAT_TYPE_P(other) || RB_TYPE_P(other, T_RATIONAL)) {
return rb_float_pow(nurat_to_f(self), other);
}
else {
return rb_num_coerce_bin(self, other, rb_intern("**"));
}
}
/*
* call-seq:
* rational <=> numeric -> -1, 0, +1, or nil
*
* Returns -1, 0, or +1 depending on whether +rational+ is
* less than, equal to, or greater than +numeric+.
*
* +nil+ is returned if the two values are incomparable.
*
* Rational(2, 3) <=> Rational(2, 3) #=> 0
* Rational(5) <=> 5 #=> 0
* Rational(2, 3) <=> Rational(1, 3) #=> 1
* Rational(1, 3) <=> 1 #=> -1
* Rational(1, 3) <=> 0.3 #=> 1
*
* Rational(1, 3) <=> "0.3" #=> nil
*/
VALUE
rb_rational_cmp(VALUE self, VALUE other)
{
if (RB_INTEGER_TYPE_P(other)) {
{
get_dat1(self);
if (dat->den == LONG2FIX(1))
return rb_int_cmp(dat->num, other); /* c14n */
other = f_rational_new_bang1(CLASS_OF(self), other);
goto other_is_rational;
}
}
else if (RB_FLOAT_TYPE_P(other)) {
return rb_dbl_cmp(nurat_to_double(self), RFLOAT_VALUE(other));
}
else if (RB_TYPE_P(other, T_RATIONAL)) {
other_is_rational:
{
VALUE num1, num2;
get_dat2(self, other);
if (FIXNUM_P(adat->num) && FIXNUM_P(adat->den) &&
FIXNUM_P(bdat->num) && FIXNUM_P(bdat->den)) {
num1 = f_imul(FIX2LONG(adat->num), FIX2LONG(bdat->den));
num2 = f_imul(FIX2LONG(bdat->num), FIX2LONG(adat->den));
}
else {
num1 = rb_int_mul(adat->num, bdat->den);
num2 = rb_int_mul(bdat->num, adat->den);
}
return rb_int_cmp(rb_int_minus(num1, num2), ZERO);
}
}
else {
return rb_num_coerce_cmp(self, other, rb_intern("<=>"));
}
}
/*
* call-seq:
* rat == object -> true or false
*
* Returns +true+ if +rat+ equals +object+ numerically.
*
* Rational(2, 3) == Rational(2, 3) #=> true
* Rational(5) == 5 #=> true
* Rational(0) == 0.0 #=> true
* Rational('1/3') == 0.33 #=> false
* Rational('1/2') == '1/2' #=> false
*/
static VALUE
nurat_eqeq_p(VALUE self, VALUE other)
{
if (RB_INTEGER_TYPE_P(other)) {
{
get_dat1(self);
if (INT_ZERO_P(dat->num) && INT_ZERO_P(other))
return Qtrue;
if (!FIXNUM_P(dat->den))
return Qfalse;
if (FIX2LONG(dat->den) != 1)
return Qfalse;
return rb_int_equal(dat->num, other);
}
}
else if (RB_FLOAT_TYPE_P(other)) {
const double d = nurat_to_double(self);
return f_boolcast(FIXNUM_ZERO_P(rb_dbl_cmp(d, RFLOAT_VALUE(other))));
}
else if (RB_TYPE_P(other, T_RATIONAL)) {
{
get_dat2(self, other);
if (INT_ZERO_P(adat->num) && INT_ZERO_P(bdat->num))
return Qtrue;
return f_boolcast(rb_int_equal(adat->num, bdat->num) &&
rb_int_equal(adat->den, bdat->den));
}
}
else {
return rb_equal(other, self);
}
}
/* :nodoc: */
static VALUE
nurat_coerce(VALUE self, VALUE other)
{
if (RB_INTEGER_TYPE_P(other)) {
return rb_assoc_new(f_rational_new_bang1(CLASS_OF(self), other), self);
}
else if (RB_FLOAT_TYPE_P(other)) {
return rb_assoc_new(other, nurat_to_f(self));
}
else if (RB_TYPE_P(other, T_RATIONAL)) {
return rb_assoc_new(other, self);
}
else if (RB_TYPE_P(other, T_COMPLEX)) {
if (k_exact_zero_p(RCOMPLEX(other)->imag))
return rb_assoc_new(f_rational_new_bang1
(CLASS_OF(self), RCOMPLEX(other)->real), self);
else
return rb_assoc_new(other, rb_Complex(self, INT2FIX(0)));
}
rb_raise(rb_eTypeError, "%s can't be coerced into %s",
rb_obj_classname(other), rb_obj_classname(self));
return Qnil;
}
/*
* call-seq:
* rat.positive? -> true or false
*
* Returns +true+ if +rat+ is greater than 0.
*/
static VALUE
nurat_positive_p(VALUE self)
{
get_dat1(self);
return f_boolcast(INT_POSITIVE_P(dat->num));
}
/*
* call-seq:
* rat.negative? -> true or false
*
* Returns +true+ if +rat+ is less than 0.
*/
static VALUE
nurat_negative_p(VALUE self)
{
get_dat1(self);
return f_boolcast(INT_NEGATIVE_P(dat->num));
}
/*
* call-seq:
* rat.abs -> rational
* rat.magnitude -> rational
*
* Returns the absolute value of +rat+.
*
* (1/2r).abs #=> (1/2)
* (-1/2r).abs #=> (1/2)
*
* Rational#magnitude is an alias for Rational#abs.
*/
VALUE
rb_rational_abs(VALUE self)
{
get_dat1(self);
if (INT_NEGATIVE_P(dat->num)) {
VALUE num = rb_int_abs(dat->num);
return nurat_s_canonicalize_internal_no_reduce(CLASS_OF(self), num, dat->den);
}
return self;
}
static VALUE
nurat_floor(VALUE self)
{
get_dat1(self);
return rb_int_idiv(dat->num, dat->den);
}
static VALUE
nurat_ceil(VALUE self)
{
get_dat1(self);
return rb_int_uminus(rb_int_idiv(rb_int_uminus(dat->num), dat->den));
}
/*
* call-seq:
* rat.to_i -> integer
*
* Returns the truncated value as an integer.
*
* Equivalent to Rational#truncate.
*
* Rational(2, 3).to_i #=> 0
* Rational(3).to_i #=> 3
* Rational(300.6).to_i #=> 300
* Rational(98, 71).to_i #=> 1
* Rational(-31, 2).to_i #=> -15
*/
static VALUE
nurat_truncate(VALUE self)
{
get_dat1(self);
if (INT_NEGATIVE_P(dat->num))
return rb_int_uminus(rb_int_idiv(rb_int_uminus(dat->num), dat->den));
return rb_int_idiv(dat->num, dat->den);
}
static VALUE
nurat_round_half_up(VALUE self)
{
VALUE num, den, neg;
get_dat1(self);
num = dat->num;
den = dat->den;
neg = INT_NEGATIVE_P(num);
if (neg)
num = rb_int_uminus(num);
num = rb_int_plus(rb_int_mul(num, TWO), den);
den = rb_int_mul(den, TWO);
num = rb_int_idiv(num, den);
if (neg)
num = rb_int_uminus(num);
return num;
}
static VALUE
nurat_round_half_down(VALUE self)
{
VALUE num, den, neg;
get_dat1(self);
num = dat->num;
den = dat->den;
neg = INT_NEGATIVE_P(num);
if (neg)
num = rb_int_uminus(num);
num = rb_int_plus(rb_int_mul(num, TWO), den);
num = rb_int_minus(num, ONE);
den = rb_int_mul(den, TWO);
num = rb_int_idiv(num, den);
if (neg)
num = rb_int_uminus(num);
return num;
}
static VALUE
nurat_round_half_even(VALUE self)
{
VALUE num, den, neg, qr;
get_dat1(self);
num = dat->num;
den = dat->den;
neg = INT_NEGATIVE_P(num);
if (neg)
num = rb_int_uminus(num);
num = rb_int_plus(rb_int_mul(num, TWO), den);
den = rb_int_mul(den, TWO);
qr = rb_int_divmod(num, den);
num = RARRAY_AREF(qr, 0);
if (INT_ZERO_P(RARRAY_AREF(qr, 1)))
num = rb_int_and(num, LONG2FIX(((int)~1)));
if (neg)
num = rb_int_uminus(num);
return num;
}
static VALUE
f_round_common(int argc, VALUE *argv, VALUE self, VALUE (*func)(VALUE))
{
VALUE n, b, s;
if (argc == 0)
return (*func)(self);
rb_scan_args(argc, argv, "01", &n);
if (!k_integer_p(n))
rb_raise(rb_eTypeError, "not an integer");
b = f_expt10(n);
s = nurat_mul(self, b);
if (k_float_p(s)) {
if (INT_NEGATIVE_P(n))
return ZERO;
return self;
}
if (!k_rational_p(s)) {
s = f_rational_new_bang1(CLASS_OF(self), s);
}
s = (*func)(s);
s = nurat_div(f_rational_new_bang1(CLASS_OF(self), s), b);
if (RB_TYPE_P(s, T_RATIONAL) && FIX2INT(rb_int_cmp(n, ONE)) < 0)
s = nurat_truncate(s);
return s;
}
/*
* call-seq:
* rat.floor([ndigits]) -> integer or rational
*
* Returns the largest number less than or equal to +rat+ with
* a precision of +ndigits+ decimal digits (default: 0).
*
* When the precision is negative, the returned value is an integer
* with at least <code>ndigits.abs</code> trailing zeros.
*
* Returns a rational when +ndigits+ is positive,
* otherwise returns an integer.
*
* Rational(3).floor #=> 3
* Rational(2, 3).floor #=> 0
* Rational(-3, 2).floor #=> -2
*
* # decimal - 1 2 3 . 4 5 6
* # ^ ^ ^ ^ ^ ^
* # precision -3 -2 -1 0 +1 +2
*
* Rational('-123.456').floor(+1).to_f #=> -123.5
* Rational('-123.456').floor(-1) #=> -130
*/
static VALUE
nurat_floor_n(int argc, VALUE *argv, VALUE self)
{
return f_round_common(argc, argv, self, nurat_floor);
}
/*
* call-seq:
* rat.ceil([ndigits]) -> integer or rational
*
* Returns the smallest number greater than or equal to +rat+ with
* a precision of +ndigits+ decimal digits (default: 0).
*
* When the precision is negative, the returned value is an integer
* with at least <code>ndigits.abs</code> trailing zeros.
*
* Returns a rational when +ndigits+ is positive,
* otherwise returns an integer.
*
* Rational(3).ceil #=> 3
* Rational(2, 3).ceil #=> 1
* Rational(-3, 2).ceil #=> -1
*
* # decimal - 1 2 3 . 4 5 6
* # ^ ^ ^ ^ ^ ^
* # precision -3 -2 -1 0 +1 +2
*
* Rational('-123.456').ceil(+1).to_f #=> -123.4
* Rational('-123.456').ceil(-1) #=> -120
*/
static VALUE
nurat_ceil_n(int argc, VALUE *argv, VALUE self)
{
return f_round_common(argc, argv, self, nurat_ceil);
}
/*
* call-seq:
* rat.truncate([ndigits]) -> integer or rational
*
* Returns +rat+ truncated (toward zero) to
* a precision of +ndigits+ decimal digits (default: 0).
*
* When the precision is negative, the returned value is an integer
* with at least <code>ndigits.abs</code> trailing zeros.
*
* Returns a rational when +ndigits+ is positive,
* otherwise returns an integer.
*
* Rational(3).truncate #=> 3
* Rational(2, 3).truncate #=> 0
* Rational(-3, 2).truncate #=> -1
*
* # decimal - 1 2 3 . 4 5 6
* # ^ ^ ^ ^ ^ ^
* # precision -3 -2 -1 0 +1 +2
*
* Rational('-123.456').truncate(+1).to_f #=> -123.4
* Rational('-123.456').truncate(-1) #=> -120
*/
static VALUE
nurat_truncate_n(int argc, VALUE *argv, VALUE self)
{
return f_round_common(argc, argv, self, nurat_truncate);
}
/*
* call-seq:
* rat.round([ndigits] [, half: mode]) -> integer or rational
*
* Returns +rat+ rounded to the nearest value with
* a precision of +ndigits+ decimal digits (default: 0).
*
* When the precision is negative, the returned value is an integer
* with at least <code>ndigits.abs</code> trailing zeros.
*
* Returns a rational when +ndigits+ is positive,
* otherwise returns an integer.
*
* Rational(3).round #=> 3
* Rational(2, 3).round #=> 1
* Rational(-3, 2).round #=> -2
*
* # decimal - 1 2 3 . 4 5 6
* # ^ ^ ^ ^ ^ ^
* # precision -3 -2 -1 0 +1 +2
*
* Rational('-123.456').round(+1).to_f #=> -123.5
* Rational('-123.456').round(-1) #=> -120
*
* The optional +half+ keyword argument is available
* similar to Float#round.
*
* Rational(25, 100).round(1, half: :up) #=> (3/10)
* Rational(25, 100).round(1, half: :down) #=> (1/5)
* Rational(25, 100).round(1, half: :even) #=> (1/5)
* Rational(35, 100).round(1, half: :up) #=> (2/5)
* Rational(35, 100).round(1, half: :down) #=> (3/10)
* Rational(35, 100).round(1, half: :even) #=> (2/5)
* Rational(-25, 100).round(1, half: :up) #=> (-3/10)
* Rational(-25, 100).round(1, half: :down) #=> (-1/5)
* Rational(-25, 100).round(1, half: :even) #=> (-1/5)
*/
static VALUE
nurat_round_n(int argc, VALUE *argv, VALUE self)
{
VALUE opt;
enum ruby_num_rounding_mode mode = (
argc = rb_scan_args(argc, argv, "*:", NULL, &opt),
rb_num_get_rounding_option(opt));
VALUE (*round_func)(VALUE) = ROUND_FUNC(mode, nurat_round);
return f_round_common(argc, argv, self, round_func);
}
static double
nurat_to_double(VALUE self)
{
get_dat1(self);
return rb_int_fdiv_double(dat->num, dat->den);
}
/*
* call-seq:
* rat.to_f -> float
*
* Returns the value as a Float.
*
* Rational(2).to_f #=> 2.0
* Rational(9, 4).to_f #=> 2.25
* Rational(-3, 4).to_f #=> -0.75
* Rational(20, 3).to_f #=> 6.666666666666667
*/
static VALUE
nurat_to_f(VALUE self)
{
return DBL2NUM(nurat_to_double(self));
}
/*
* call-seq:
* rat.to_r -> self
*
* Returns self.
*
* Rational(2).to_r #=> (2/1)
* Rational(-8, 6).to_r #=> (-4/3)
*/
static VALUE
nurat_to_r(VALUE self)
{
return self;
}
#define id_ceil rb_intern("ceil")
#define f_ceil(x) rb_funcall((x), id_ceil, 0)
#define id_quo rb_intern("quo")
#define f_quo(x,y) rb_funcall((x), id_quo, 1, (y))
#define f_reciprocal(x) f_quo(ONE, (x))
/*
The algorithm here is the method described in CLISP. Bruno Haible has
graciously given permission to use this algorithm. He says, "You can use
it, if you present the following explanation of the algorithm."
Algorithm (recursively presented):
If x is a rational number, return x.
If x = 0.0, return 0.
If x < 0.0, return (- (rationalize (- x))).
If x > 0.0:
Call (integer-decode-float x). It returns a m,e,s=1 (mantissa,
exponent, sign).
If m = 0 or e >= 0: return x = m*2^e.
Search a rational number between a = (m-1/2)*2^e and b = (m+1/2)*2^e
with smallest possible numerator and denominator.
Note 1: If m is a power of 2, we ought to take a = (m-1/4)*2^e.
But in this case the result will be x itself anyway, regardless of
the choice of a. Therefore we can simply ignore this case.
Note 2: At first, we need to consider the closed interval [a,b].
but since a and b have the denominator 2^(|e|+1) whereas x itself
has a denominator <= 2^|e|, we can restrict the search to the open
interval (a,b).
So, for given a and b (0 < a < b) we are searching a rational number
y with a <= y <= b.
Recursive algorithm fraction_between(a,b):
c := (ceiling a)
if c < b
then return c ; because a <= c < b, c integer
else
; a is not integer (otherwise we would have had c = a < b)
k := c-1 ; k = floor(a), k < a < b <= k+1
return y = k + 1/fraction_between(1/(b-k), 1/(a-k))
; note 1 <= 1/(b-k) < 1/(a-k)
You can see that we are actually computing a continued fraction expansion.
Algorithm (iterative):
If x is rational, return x.
Call (integer-decode-float x). It returns a m,e,s (mantissa,
exponent, sign).
If m = 0 or e >= 0, return m*2^e*s. (This includes the case x = 0.0.)
Create rational numbers a := (2*m-1)*2^(e-1) and b := (2*m+1)*2^(e-1)
(positive and already in lowest terms because the denominator is a
power of two and the numerator is odd).
Start a continued fraction expansion
p[-1] := 0, p[0] := 1, q[-1] := 1, q[0] := 0, i := 0.
Loop
c := (ceiling a)
if c >= b
then k := c-1, partial_quotient(k), (a,b) := (1/(b-k),1/(a-k)),
goto Loop
finally partial_quotient(c).
Here partial_quotient(c) denotes the iteration
i := i+1, p[i] := c*p[i-1]+p[i-2], q[i] := c*q[i-1]+q[i-2].
At the end, return s * (p[i]/q[i]).
This rational number is already in lowest terms because
p[i]*q[i-1]-p[i-1]*q[i] = (-1)^i.
*/
static void
nurat_rationalize_internal(VALUE a, VALUE b, VALUE *p, VALUE *q)
{
VALUE c, k, t, p0, p1, p2, q0, q1, q2;
p0 = ZERO;
p1 = ONE;
q0 = ONE;
q1 = ZERO;
while (1) {
c = f_ceil(a);
if (f_lt_p(c, b))
break;
k = f_sub(c, ONE);
p2 = f_add(f_mul(k, p1), p0);
q2 = f_add(f_mul(k, q1), q0);
t = f_reciprocal(f_sub(b, k));
b = f_reciprocal(f_sub(a, k));
a = t;
p0 = p1;
q0 = q1;
p1 = p2;
q1 = q2;
}
*p = f_add(f_mul(c, p1), p0);
*q = f_add(f_mul(c, q1), q0);
}
/*
* call-seq:
* rat.rationalize -> self
* rat.rationalize(eps) -> rational
*
* Returns a simpler approximation of the value if the optional
* argument +eps+ is given (rat-|eps| <= result <= rat+|eps|),
* self otherwise.
*
* r = Rational(5033165, 16777216)
* r.rationalize #=> (5033165/16777216)
* r.rationalize(Rational('0.01')) #=> (3/10)
* r.rationalize(Rational('0.1')) #=> (1/3)
*/
static VALUE
nurat_rationalize(int argc, VALUE *argv, VALUE self)
{
VALUE e, a, b, p, q;
if (argc == 0)
return self;
if (nurat_negative_p(self))
return rb_rational_uminus(nurat_rationalize(argc, argv, rb_rational_uminus(self)));
rb_scan_args(argc, argv, "01", &e);
e = f_abs(e);
a = f_sub(self, e);
b = f_add(self, e);
if (f_eqeq_p(a, b))
return self;
nurat_rationalize_internal(a, b, &p, &q);
return f_rational_new2(CLASS_OF(self), p, q);
}
/* :nodoc: */
static VALUE
nurat_hash(VALUE self)
{
st_index_t v, h[2];
VALUE n;
get_dat1(self);
n = rb_hash(dat->num);
h[0] = NUM2LONG(n);
n = rb_hash(dat->den);
h[1] = NUM2LONG(n);
v = rb_memhash(h, sizeof(h));
return ST2FIX(v);
}
static VALUE
f_format(VALUE self, VALUE (*func)(VALUE))
{
VALUE s;
get_dat1(self);
s = (*func)(dat->num);
rb_str_cat2(s, "/");
rb_str_concat(s, (*func)(dat->den));
return s;
}
/*
* call-seq:
* rat.to_s -> string
*
* Returns the value as a string.
*
* Rational(2).to_s #=> "2/1"
* Rational(-8, 6).to_s #=> "-4/3"
* Rational('1/2').to_s #=> "1/2"
*/
static VALUE
nurat_to_s(VALUE self)
{
return f_format(self, f_to_s);
}
/*
* call-seq:
* rat.inspect -> string
*
* Returns the value as a string for inspection.
*
* Rational(2).inspect #=> "(2/1)"
* Rational(-8, 6).inspect #=> "(-4/3)"
* Rational('1/2').inspect #=> "(1/2)"
*/
static VALUE
nurat_inspect(VALUE self)
{
VALUE s;
s = rb_usascii_str_new2("(");
rb_str_concat(s, f_format(self, f_inspect));
rb_str_cat2(s, ")");
return s;
}
/* :nodoc: */
static VALUE
nurat_dumper(VALUE self)
{
return self;
}
/* :nodoc: */
static VALUE
nurat_loader(VALUE self, VALUE a)
{
VALUE num, den;
get_dat1(self);
num = rb_ivar_get(a, id_i_num);
den = rb_ivar_get(a, id_i_den);
nurat_int_check(num);
nurat_int_check(den);
nurat_canonicalize(&num, &den);
RRATIONAL_SET_NUM(dat, num);
RRATIONAL_SET_DEN(dat, den);
OBJ_FREEZE_RAW(self);
return self;
}
/* :nodoc: */
static VALUE
nurat_marshal_dump(VALUE self)
{
VALUE a;
get_dat1(self);
a = rb_assoc_new(dat->num, dat->den);
rb_copy_generic_ivar(a, self);
return a;
}
/* :nodoc: */
static VALUE
nurat_marshal_load(VALUE self, VALUE a)
{
VALUE num, den;
rb_check_frozen(self);
rb_check_trusted(self);
Check_Type(a, T_ARRAY);
if (RARRAY_LEN(a) != 2)
rb_raise(rb_eArgError, "marshaled rational must have an array whose length is 2 but %ld", RARRAY_LEN(a));
num = RARRAY_AREF(a, 0);
den = RARRAY_AREF(a, 1);
nurat_int_check(num);
nurat_int_check(den);
nurat_canonicalize(&num, &den);
rb_ivar_set(self, id_i_num, num);
rb_ivar_set(self, id_i_den, den);
return self;
}
/* --- */
VALUE
rb_rational_reciprocal(VALUE x)
{
get_dat1(x);
return f_rational_new_no_reduce2(CLASS_OF(x), dat->den, dat->num);
}
/*
* call-seq:
* int.gcd(other_int) -> integer
*
* Returns the greatest common divisor of the two integers.
* The result is always positive. 0.gcd(x) and x.gcd(0) return x.abs.
*
* 36.gcd(60) #=> 12
* 2.gcd(2) #=> 2
* 3.gcd(-7) #=> 1
* ((1<<31)-1).gcd((1<<61)-1) #=> 1
*/
VALUE
rb_gcd(VALUE self, VALUE other)
{
other = nurat_int_value(other);
return f_gcd(self, other);
}
/*
* call-seq:
* int.lcm(other_int) -> integer
*
* Returns the least common multiple of the two integers.
* The result is always positive. 0.lcm(x) and x.lcm(0) return zero.
*
* 36.lcm(60) #=> 180
* 2.lcm(2) #=> 2
* 3.lcm(-7) #=> 21
* ((1<<31)-1).lcm((1<<61)-1) #=> 4951760154835678088235319297
*/
VALUE
rb_lcm(VALUE self, VALUE other)
{
other = nurat_int_value(other);
return f_lcm(self, other);
}
/*
* call-seq:
* int.gcdlcm(other_int) -> array
*
* Returns an array with the greatest common divisor and
* the least common multiple of the two integers, [gcd, lcm].
*
* 36.gcdlcm(60) #=> [12, 180]
* 2.gcdlcm(2) #=> [2, 2]
* 3.gcdlcm(-7) #=> [1, 21]
* ((1<<31)-1).gcdlcm((1<<61)-1) #=> [1, 4951760154835678088235319297]
*/
VALUE
rb_gcdlcm(VALUE self, VALUE other)
{
other = nurat_int_value(other);
return rb_assoc_new(f_gcd(self, other), f_lcm(self, other));
}
VALUE
rb_rational_raw(VALUE x, VALUE y)
{
return nurat_s_new_internal(rb_cRational, x, y);
}
VALUE
rb_rational_new(VALUE x, VALUE y)
{
return nurat_s_canonicalize_internal(rb_cRational, x, y);
}
VALUE
rb_Rational(VALUE x, VALUE y)
{
VALUE a[2];
a[0] = x;
a[1] = y;
return nurat_s_convert(2, a, rb_cRational);
}
VALUE
rb_rational_num(VALUE rat)
{
return nurat_numerator(rat);
}
VALUE
rb_rational_den(VALUE rat)
{
return nurat_denominator(rat);
}
#define id_numerator rb_intern("numerator")
#define f_numerator(x) rb_funcall((x), id_numerator, 0)
#define id_denominator rb_intern("denominator")
#define f_denominator(x) rb_funcall((x), id_denominator, 0)
#define id_to_r idTo_r
#define f_to_r(x) rb_funcall((x), id_to_r, 0)
/*
* call-seq:
* num.numerator -> integer
*
* Returns the numerator.
*/
static VALUE
numeric_numerator(VALUE self)
{
return f_numerator(f_to_r(self));
}
/*
* call-seq:
* num.denominator -> integer
*
* Returns the denominator (always positive).
*/
static VALUE
numeric_denominator(VALUE self)
{
return f_denominator(f_to_r(self));
}
/*
* call-seq:
* num.quo(int_or_rat) -> rat
* num.quo(flo) -> flo
*
* Returns the most exact division (rational for integers, float for floats).
*/
VALUE
rb_numeric_quo(VALUE x, VALUE y)
{
if (RB_FLOAT_TYPE_P(y)) {
return rb_funcall(x, rb_intern("fdiv"), 1, y);
}
if (canonicalization) {
x = rb_rational_raw1(x);
}
else {
x = rb_convert_type(x, T_RATIONAL, "Rational", "to_r");
}
return nurat_div(x, y);
}
/*
* call-seq:
* int.numerator -> self
*
* Returns self.
*/
static VALUE
integer_numerator(VALUE self)
{
return self;
}
/*
* call-seq:
* int.denominator -> 1
*
* Returns 1.
*/
static VALUE
integer_denominator(VALUE self)
{
return INT2FIX(1);
}
static VALUE float_to_r(VALUE self);
/*
* call-seq:
* flo.numerator -> integer
*
* Returns the numerator. The result is machine dependent.
*
* n = 0.3.numerator #=> 5404319552844595
* d = 0.3.denominator #=> 18014398509481984
* n.fdiv(d) #=> 0.3
*
* See also Float#denominator.
*/
static VALUE
float_numerator(VALUE self)
{
double d = RFLOAT_VALUE(self);
VALUE r;
if (isinf(d) || isnan(d))
return self;
r = float_to_r(self);
if (canonicalization && k_integer_p(r)) {
return r;
}
return nurat_numerator(r);
}
/*
* call-seq:
* flo.denominator -> integer
*
* Returns the denominator (always positive). The result is machine
* dependent.
*
* See also Float#numerator.
*/
static VALUE
float_denominator(VALUE self)
{
double d = RFLOAT_VALUE(self);
VALUE r;
if (isinf(d) || isnan(d))
return INT2FIX(1);
r = float_to_r(self);
if (canonicalization && k_integer_p(r)) {
return ONE;
}
return nurat_denominator(r);
}
/*
* call-seq:
* nil.to_r -> (0/1)
*
* Returns zero as a rational.
*/
static VALUE
nilclass_to_r(VALUE self)
{
return rb_rational_new1(INT2FIX(0));
}
/*
* call-seq:
* nil.rationalize([eps]) -> (0/1)
*
* Returns zero as a rational. The optional argument +eps+ is always
* ignored.
*/
static VALUE
nilclass_rationalize(int argc, VALUE *argv, VALUE self)
{
rb_scan_args(argc, argv, "01", NULL);
return nilclass_to_r(self);
}
/*
* call-seq:
* int.to_r -> rational
*
* Returns the value as a rational.
*
* 1.to_r #=> (1/1)
* (1<<64).to_r #=> (18446744073709551616/1)
*/
static VALUE
integer_to_r(VALUE self)
{
return rb_rational_new1(self);
}
/*
* call-seq:
* int.rationalize([eps]) -> rational
*
* Returns the value as a rational. The optional argument +eps+ is
* always ignored.
*/
static VALUE
integer_rationalize(int argc, VALUE *argv, VALUE self)
{
rb_scan_args(argc, argv, "01", NULL);
return integer_to_r(self);
}
static void
float_decode_internal(VALUE self, VALUE *rf, VALUE *rn)
{
double f;
int n;
f = frexp(RFLOAT_VALUE(self), &n);
f = ldexp(f, DBL_MANT_DIG);
n -= DBL_MANT_DIG;
*rf = rb_dbl2big(f);
*rn = INT2FIX(n);
}
/*
* call-seq:
* flt.to_r -> rational
*
* Returns the value as a rational.
*
* 2.0.to_r #=> (2/1)
* 2.5.to_r #=> (5/2)
* -0.75.to_r #=> (-3/4)
* 0.0.to_r #=> (0/1)
* 0.3.to_r #=> (5404319552844595/18014398509481984)
*
* NOTE: 0.3.to_r isn't the same as "0.3".to_r. The latter is
* equivalent to "3/10".to_r, but the former isn't so.
*
* 0.3.to_r == 3/10r #=> false
* "0.3".to_r == 3/10r #=> true
*
* See also Float#rationalize.
*/
static VALUE
float_to_r(VALUE self)
{
VALUE f, n;
float_decode_internal(self, &f, &n);
#if FLT_RADIX == 2
{
long ln = FIX2LONG(n);
if (ln == 0)
return rb_rational_new1(f);
if (ln > 0)
return rb_rational_new1(rb_int_lshift(f, n));
ln = -ln;
return rb_rational_new2(f, rb_int_lshift(ONE, INT2FIX(ln)));
}
#else
f = rb_int_mul(f, rb_int_pow(INT2FIX(FLT_RADIX), n));
if (RB_TYPE_P(f, T_RATIONAL))
return f;
return rb_rational_new1(f);
#endif
}
VALUE
rb_flt_rationalize_with_prec(VALUE flt, VALUE prec)
{
VALUE e, a, b, p, q;
e = f_abs(prec);
a = f_sub(flt, e);
b = f_add(flt, e);
if (f_eqeq_p(a, b))
return float_to_r(flt);
nurat_rationalize_internal(a, b, &p, &q);
return rb_rational_new2(p, q);
}
VALUE
rb_flt_rationalize(VALUE flt)
{
VALUE a, b, f, n, p, q;
float_decode_internal(flt, &f, &n);
if (INT_ZERO_P(f) || FIX2INT(n) >= 0)
return rb_rational_new1(rb_int_lshift(f, n));
#if FLT_RADIX == 2
{
VALUE two_times_f, den;
two_times_f = rb_int_mul(TWO, f);
den = rb_int_lshift(ONE, rb_int_minus(ONE, n));
a = rb_rational_new2(rb_int_minus(two_times_f, ONE), den);
b = rb_rational_new2(rb_int_plus(two_times_f, ONE), den);
}
#else
{
VALUE radix_times_f, den;
radix_times_f = rb_int_mul(INT2FIX(FLT_RADIX), f);
den = rb_int_pow(INT2FIX(FLT_RADIX), rb_int_minus(ONE, n));
a = rb_rational_new2(rb_int_minus(radix_times_f, INT2FIX(FLT_RADIX - 1)), den);
b = rb_rational_new2(rb_int_plus(radix_times_f, INT2FIX(FLT_RADIX - 1)), den);
}
#endif
if (nurat_eqeq_p(a, b))
return float_to_r(flt);
nurat_rationalize_internal(a, b, &p, &q);
return rb_rational_new2(p, q);
}
/*
* call-seq:
* flt.rationalize([eps]) -> rational
*
* Returns a simpler approximation of the value (flt-|eps| <= result
* <= flt+|eps|). If the optional argument +eps+ is not given,
* it will be chosen automatically.
*
* 0.3.rationalize #=> (3/10)
* 1.333.rationalize #=> (1333/1000)
* 1.333.rationalize(0.01) #=> (4/3)
*
* See also Float#to_r.
*/
static VALUE
float_rationalize(int argc, VALUE *argv, VALUE self)
{
VALUE e;
double d = RFLOAT_VALUE(self);
if (d < 0.0)
return rb_rational_uminus(float_rationalize(argc, argv, DBL2NUM(-d)));
rb_scan_args(argc, argv, "01", &e);
if (argc != 0) {
return rb_flt_rationalize_with_prec(self, e);
}
else {
return rb_flt_rationalize(self);
}
}
#include <ctype.h>
inline static int
issign(int c)
{
return (c == '-' || c == '+');
}
static int
read_sign(const char **s, const char *const e)
{
int sign = '?';
if (*s < e && issign(**s)) {
sign = **s;
(*s)++;
}
return sign;
}
inline static int
islettere(int c)
{
return (c == 'e' || c == 'E');
}
static VALUE
negate_num(VALUE num)
{
if (FIXNUM_P(num)) {
return rb_int_uminus(num);
}
else {
BIGNUM_NEGATE(num);
return rb_big_norm(num);
}
}
static int
read_num(const char **s, const char *const end, VALUE *num, VALUE *div)
{
VALUE fp = ONE, exp, fn = ZERO, n = ZERO;
int expsign = 0, ok = 0;
char *e;
*div = ONE;
*num = ZERO;
if (*s < end && **s != '.') {
n = rb_int_parse_cstr(*s, end-*s, &e, NULL,
10, RB_INT_PARSE_UNDERSCORE);
if (NIL_P(n))
return 0;
*s = e;
*num = n;
ok = 1;
}
if (*s < end && **s == '.') {
size_t count = 0;
(*s)++;
fp = rb_int_parse_cstr(*s, end-*s, &e, &count,
10, RB_INT_PARSE_UNDERSCORE);
if (NIL_P(fp))
return 1;
*s = e;
{
VALUE l = f_expt10(SIZET2NUM(count));
n = n == ZERO ? fp : rb_int_plus(rb_int_mul(*num, l), fp);
*num = n;
*div = l;
fn = SIZET2NUM(count);
}
ok = 1;
}
if (ok && *s + 1 < end && islettere(**s)) {
(*s)++;
expsign = read_sign(s, end);
exp = rb_int_parse_cstr(*s, end-*s, &e, NULL,
10, RB_INT_PARSE_UNDERSCORE);
if (NIL_P(exp))
return 1;
*s = e;
if (exp != ZERO) {
if (expsign == '-') {
if (fn != ZERO) exp = rb_int_plus(exp, fn);
*div = f_expt10(exp);
}
else {
if (fn != ZERO) exp = rb_int_minus(exp, fn);
if (INT_NEGATIVE_P(exp)) {
*div = f_expt10(negate_num(exp));
}
else {
if (exp != ZERO) *num = rb_int_mul(n, f_expt10(exp));
*div = ONE;
}
}
}
}
return ok;
}
inline static const char *
skip_ws(const char *s, const char *e)
{
while (s < e && isspace((unsigned char)*s))
++s;
return s;
}
static VALUE
parse_rat(const char *s, const char *const e, int strict, int raise)
{
int sign;
VALUE num, den, ndiv, ddiv;
s = skip_ws(s, e);
sign = read_sign(&s, e);
if (!read_num(&s, e, &num, &ndiv)) {
if (strict) return Qnil;
return canonicalization ? ZERO : nurat_s_alloc(rb_cRational);
}
nurat_reduce(&num, &ndiv);
den = ndiv;
if (s < e && *s == '/') {
s++;
if (!read_num(&s, e, &den, &ddiv)) {
if (strict) return Qnil;
den = ndiv;
}
else if (den == ZERO) {
if (!raise) return Qnil;
rb_num_zerodiv();
}
else if (strict && skip_ws(s, e) != e) {
return Qnil;
}
else {
nurat_reduce(&den, &ddiv);
nurat_reduce(&num, &den);
nurat_reduce(&ndiv, &ddiv);
if (ndiv != ONE) den = rb_int_mul(den, ndiv);
if (ddiv != ONE) num = rb_int_mul(num, ddiv);
}
}
else if (strict && skip_ws(s, e) != e) {
return Qnil;
}
if (sign == '-') {
num = negate_num(num);
}
if (!canonicalization || den != ONE)
num = rb_rational_raw(num, den);
return num;
}
static VALUE
string_to_r_strict(VALUE self, int raise)
{
VALUE num;
rb_must_asciicompat(self);
num = parse_rat(RSTRING_PTR(self), RSTRING_END(self), 1, raise);
if (NIL_P(num)) {
if (!raise) return Qnil;
rb_raise(rb_eArgError, "invalid value for convert(): %+"PRIsVALUE,
self);
}
if (RB_FLOAT_TYPE_P(num)) {
if (!raise) return Qnil;
rb_raise(rb_eFloatDomainError, "Infinity");
}
return num;
}
/*
* call-seq:
* str.to_r -> rational
*
* Returns the result of interpreting leading characters in +str+
* as a rational. Leading whitespace and extraneous characters
* past the end of a valid number are ignored.
* Digit sequences can be separated by an underscore.
* If there is not a valid number at the start of +str+,
* zero is returned. This method never raises an exception.
*
* ' 2 '.to_r #=> (2/1)
* '300/2'.to_r #=> (150/1)
* '-9.2'.to_r #=> (-46/5)
* '-9.2e2'.to_r #=> (-920/1)
* '1_234_567'.to_r #=> (1234567/1)
* '21 June 09'.to_r #=> (21/1)
* '21/06/09'.to_r #=> (7/2)
* 'BWV 1079'.to_r #=> (0/1)
*
* NOTE: "0.3".to_r isn't the same as 0.3.to_r. The former is
* equivalent to "3/10".to_r, but the latter isn't so.
*
* "0.3".to_r == 3/10r #=> true
* 0.3.to_r == 3/10r #=> false
*
* See also Kernel#Rational.
*/
static VALUE
string_to_r(VALUE self)
{
VALUE num;
rb_must_asciicompat(self);
num = parse_rat(RSTRING_PTR(self), RSTRING_END(self), 0, TRUE);
if (RB_FLOAT_TYPE_P(num))
rb_raise(rb_eFloatDomainError, "Infinity");
return num;
}
VALUE
rb_cstr_to_rat(const char *s, int strict) /* for complex's internal */
{
VALUE num;
num = parse_rat(s, s + strlen(s), strict, TRUE);
if (RB_FLOAT_TYPE_P(num))
rb_raise(rb_eFloatDomainError, "Infinity");
return num;
}
static VALUE
to_rational(VALUE val)
{
return rb_convert_type_with_id(val, T_RATIONAL, "Rational", idTo_r);
}
static VALUE
nurat_convert(VALUE klass, VALUE numv, VALUE denv, int raise)
{
VALUE a1 = numv, a2 = denv;
int state;
if (NIL_P(a1) || NIL_P(a2))
rb_raise(rb_eTypeError, "can't convert nil into Rational");
if (RB_TYPE_P(a1, T_COMPLEX)) {
if (k_exact_zero_p(RCOMPLEX(a1)->imag))
a1 = RCOMPLEX(a1)->real;
}
if (RB_TYPE_P(a2, T_COMPLEX)) {
if (k_exact_zero_p(RCOMPLEX(a2)->imag))
a2 = RCOMPLEX(a2)->real;
}
if (RB_FLOAT_TYPE_P(a1)) {
a1 = float_to_r(a1);
}
else if (RB_TYPE_P(a1, T_STRING)) {
a1 = string_to_r_strict(a1, raise);
if (!raise && NIL_P(a1)) return Qnil;
}
if (RB_FLOAT_TYPE_P(a2)) {
a2 = float_to_r(a2);
}
else if (RB_TYPE_P(a2, T_STRING)) {
a2 = string_to_r_strict(a2, raise);
if (!raise && NIL_P(a2)) return Qnil;
}
if (RB_TYPE_P(a1, T_RATIONAL)) {
if (a2 == Qundef || (k_exact_one_p(a2)))
return a1;
}
if (a2 == Qundef) {
if (!k_integer_p(a1)) {
if (!raise) {
VALUE result = rb_protect(to_rational, a1, NULL);
rb_set_errinfo(Qnil);
return result;
}
return to_rational(a1);
}
}
else {
if (!k_numeric_p(a1)) {
if (!raise) {
a1 = rb_protect(to_rational, a1, &state);
if (state) {
rb_set_errinfo(Qnil);
return Qnil;
}
}
else {
a1 = rb_check_convert_type_with_id(a1, T_RATIONAL, "Rational", idTo_r);
}
}
if (!k_numeric_p(a2)) {
if (!raise) {
a2 = rb_protect(to_rational, a2, &state);
if (state) {
rb_set_errinfo(Qnil);
return Qnil;
}
}
else {
a2 = rb_check_convert_type_with_id(a2, T_RATIONAL, "Rational", idTo_r);
}
}
if ((k_numeric_p(a1) && k_numeric_p(a2)) &&
(!f_integer_p(a1) || !f_integer_p(a2)))
return f_div(a1, a2);
}
{
int argc;
VALUE argv2[2];
argv2[0] = a1;
if (a2 == Qundef) {
argv2[1] = Qnil;
argc = 1;
}
else {
if (!k_integer_p(a2) && !raise) return Qnil;
argv2[1] = a2;
argc = 2;
}
return nurat_s_new(argc, argv2, klass);
}
}
static VALUE
nurat_s_convert(int argc, VALUE *argv, VALUE klass)
{
VALUE a1, a2;
if (rb_scan_args(argc, argv, "11", &a1, &a2) == 1) {
a2 = Qundef;
}
return nurat_convert(klass, a1, a2, TRUE);
}
/*
* A rational number can be represented as a pair of integer numbers:
* a/b (b>0), where a is the numerator and b is the denominator.
* Integer a equals rational a/1 mathematically.
*
* In Ruby, you can create rational objects with the Kernel#Rational,
* to_r, or rationalize methods or by suffixing +r+ to a literal.
* The return values will be irreducible fractions.
*
* Rational(1) #=> (1/1)
* Rational(2, 3) #=> (2/3)
* Rational(4, -6) #=> (-2/3)
* 3.to_r #=> (3/1)
* 2/3r #=> (2/3)
*
* You can also create rational objects from floating-point numbers or
* strings.
*
* Rational(0.3) #=> (5404319552844595/18014398509481984)
* Rational('0.3') #=> (3/10)
* Rational('2/3') #=> (2/3)
*
* 0.3.to_r #=> (5404319552844595/18014398509481984)
* '0.3'.to_r #=> (3/10)
* '2/3'.to_r #=> (2/3)
* 0.3.rationalize #=> (3/10)
*
* A rational object is an exact number, which helps you to write
* programs without any rounding errors.
*
* 10.times.inject(0) {|t| t + 0.1 } #=> 0.9999999999999999
* 10.times.inject(0) {|t| t + Rational('0.1') } #=> (1/1)
*
* However, when an expression includes an inexact component (numerical value
* or operation), it will produce an inexact result.
*
* Rational(10) / 3 #=> (10/3)
* Rational(10) / 3.0 #=> 3.3333333333333335
*
* Rational(-8) ** Rational(1, 3)
* #=> (1.0000000000000002+1.7320508075688772i)
*/
void
Init_Rational(void)
{
VALUE compat;
#undef rb_intern
#define rb_intern(str) rb_intern_const(str)
id_abs = rb_intern("abs");
id_idiv = rb_intern("div");
id_integer_p = rb_intern("integer?");
id_i_num = rb_intern("@numerator");
id_i_den = rb_intern("@denominator");
rb_cRational = rb_define_class("Rational", rb_cNumeric);
rb_define_alloc_func(rb_cRational, nurat_s_alloc);
rb_undef_method(CLASS_OF(rb_cRational), "allocate");
rb_undef_method(CLASS_OF(rb_cRational), "new");
rb_define_global_function("Rational", nurat_f_rational, -1);
rb_define_method(rb_cRational, "numerator", nurat_numerator, 0);
rb_define_method(rb_cRational, "denominator", nurat_denominator, 0);
rb_define_method(rb_cRational, "-@", rb_rational_uminus, 0);
rb_define_method(rb_cRational, "+", rb_rational_plus, 1);
rb_define_method(rb_cRational, "-", nurat_sub, 1);
rb_define_method(rb_cRational, "*", nurat_mul, 1);
rb_define_method(rb_cRational, "/", nurat_div, 1);
rb_define_method(rb_cRational, "quo", nurat_div, 1);
rb_define_method(rb_cRational, "fdiv", nurat_fdiv, 1);
rb_define_method(rb_cRational, "**", nurat_expt, 1);
rb_define_method(rb_cRational, "<=>", rb_rational_cmp, 1);
rb_define_method(rb_cRational, "==", nurat_eqeq_p, 1);
rb_define_method(rb_cRational, "coerce", nurat_coerce, 1);
rb_define_method(rb_cRational, "positive?", nurat_positive_p, 0);
rb_define_method(rb_cRational, "negative?", nurat_negative_p, 0);
rb_define_method(rb_cRational, "abs", rb_rational_abs, 0);
rb_define_method(rb_cRational, "magnitude", rb_rational_abs, 0);
rb_define_method(rb_cRational, "floor", nurat_floor_n, -1);
rb_define_method(rb_cRational, "ceil", nurat_ceil_n, -1);
rb_define_method(rb_cRational, "truncate", nurat_truncate_n, -1);
rb_define_method(rb_cRational, "round", nurat_round_n, -1);
rb_define_method(rb_cRational, "to_i", nurat_truncate, 0);
rb_define_method(rb_cRational, "to_f", nurat_to_f, 0);
rb_define_method(rb_cRational, "to_r", nurat_to_r, 0);
rb_define_method(rb_cRational, "rationalize", nurat_rationalize, -1);
rb_define_method(rb_cRational, "hash", nurat_hash, 0);
rb_define_method(rb_cRational, "to_s", nurat_to_s, 0);
rb_define_method(rb_cRational, "inspect", nurat_inspect, 0);
rb_define_private_method(rb_cRational, "marshal_dump", nurat_marshal_dump, 0);
/* :nodoc: */
compat = rb_define_class_under(rb_cRational, "compatible", rb_cObject);
rb_define_private_method(compat, "marshal_load", nurat_marshal_load, 1);
rb_marshal_define_compat(rb_cRational, compat, nurat_dumper, nurat_loader);
/* --- */
rb_define_method(rb_cInteger, "gcd", rb_gcd, 1);
rb_define_method(rb_cInteger, "lcm", rb_lcm, 1);
rb_define_method(rb_cInteger, "gcdlcm", rb_gcdlcm, 1);
rb_define_method(rb_cNumeric, "numerator", numeric_numerator, 0);
rb_define_method(rb_cNumeric, "denominator", numeric_denominator, 0);
rb_define_method(rb_cNumeric, "quo", rb_numeric_quo, 1);
rb_define_method(rb_cInteger, "numerator", integer_numerator, 0);
rb_define_method(rb_cInteger, "denominator", integer_denominator, 0);
rb_define_method(rb_cFloat, "numerator", float_numerator, 0);
rb_define_method(rb_cFloat, "denominator", float_denominator, 0);
rb_define_method(rb_cNilClass, "to_r", nilclass_to_r, 0);
rb_define_method(rb_cNilClass, "rationalize", nilclass_rationalize, -1);
rb_define_method(rb_cInteger, "to_r", integer_to_r, 0);
rb_define_method(rb_cInteger, "rationalize", integer_rationalize, -1);
rb_define_method(rb_cFloat, "to_r", float_to_r, 0);
rb_define_method(rb_cFloat, "rationalize", float_rationalize, -1);
rb_define_method(rb_cString, "to_r", string_to_r, 0);
rb_define_private_method(CLASS_OF(rb_cRational), "convert", nurat_s_convert, -1);
rb_provide("rational.so"); /* for backward compatibility */
}
/*
Local variables:
c-file-style: "ruby"
End:
*/