ASAN leaves a pointer to the fake frame on the stack; we can use the
__asan_addr_is_in_fake_stack API to work out the extent of the fake
stack and thus mark any VALUEs contained therein.
[Bug #20001]
This commit changes how stack extents are calculated for both the main
thread and other threads. Ruby uses the address of a local variable as
part of the calculation for machine stack extents:
* pthreads uses it as a lower-bound on the start of the stack, because
glibc (and maybe other libcs) can store its own data on the stack
before calling into user code on thread creation.
* win32 uses it as an argument to VirtualQuery, which gets the extent of
the memory mapping which contains the variable
However, the local being used for this is actually too low (too close to
the leaf function call) in both the main thread case and the new thread
case.
In the main thread case, we have the `INIT_STACK` macro, which is used
for pthreads to set the `native_main_thread->stack_start` value. This
value is correctly captured at the very top level of the program (in
main.c). However, this is _not_ what's used to set the execution context
machine stack (`th->ec->machine_stack.stack_start`); that gets set as
part of a call to `ruby_thread_init_stack` in `Init_BareVM`, using the
address of a local variable allocated _inside_ `Init_BareVM`. This is
too low; we need to use a local allocated closer to the top of the
program.
In the new thread case, the lolcal is allocated inside
`native_thread_init_stack`, which is, again, too low.
In both cases, this means that we might have VALUEs lying outside the
bounds of `th->ec->machine.stack_{start,end}`, which won't be marked
correctly by the GC machinery.
To fix this,
* In the main thread case: We already have `INIT_STACK` at the right
level, so just pass that local var to `ruby_thread_init_stack`.
* In the new thread case: Allocate the local one level above the call to
`native_thread_init_stack` in `call_thread_start_func2`.
[Bug #20001]
fix
ASAN leaves a pointer to the fake frame on the stack; we can use the
__asan_addr_is_in_fake_stack API to work out the extent of the fake
stack and thus mark any VALUEs contained therein.
[Bug #20001]
The implementation of `native_thread_init_stack` for the various
threading models can use the address of a local variable as part of the
calculation of the machine stack extents:
* pthreads uses it as a lower-bound on the start of the stack, because
glibc (and maybe other libcs) can store its own data on the stack
before calling into user code on thread creation.
* win32 uses it as an argument to VirtualQuery, which gets the extent of
the memory mapping which contains the variable
However, the local being used for this is actually allocated _inside_
the `native_thread_init_stack` frame; that means the caller might
allocate a VALUE on the stack that actually lies outside the bounds
stored in machine.stack_{start,end}.
A local variable from one level above the topmost frame that stores
VALUEs on the stack must be drilled down into the call to
`native_thread_init_stack` to be used in the calculation. This probably
doesn't _really_ matter for the win32 case (they'll be in the same
memory mapping so VirtualQuery should return the same thing), but
definitely could matter for the pthreads case.
[Bug #20001]
`rb_thread_wait_for_single_fd(fd)` waits until `fd` is ready.
Without MN it shouldn't use `thread_io_wait_events()` for the
retry checking (alwasy false if MN is not active).
Before this patch, the MN scheduler waits for the IO with the
following steps:
1. `poll(fd, timeout=0)` to check fd is ready or not.
2. if fd is not ready, waits with MN thread scheduler
3. call `func` to issue the blocking I/O call
The advantage of advanced `poll()` is we can wait for the
IO ready for any fds. However `poll()` becomes overhead
for already ready fds.
This patch changes the steps like:
1. call `func` to issue the blocking I/O call
2. if the `func` returns `EWOULDBLOCK` the fd is `O_NONBLOCK`
and we need to wait for fd is ready so that waits with MN
thread scheduler.
In this case, we can wait only for `O_NONBLOCK` fds. Otherwise
it waits with blocking operations such as `read()` system call.
However we don't need to call `poll()` to check fd is ready
in advance.
With this patch we can observe performance improvement
on microbenchmark which repeats blocking I/O (not
`O_NONBLOCK` fd) with and without MN thread scheduler.
```ruby
require 'benchmark'
f = open('/dev/null', 'w')
f.sync = true
TN = 1
N = 1_000_000 / TN
Benchmark.bm{|x|
x.report{
TN.times.map{
Thread.new{
N.times{f.print '.'}
}
}.each(&:join)
}
}
__END__
TN = 1
user system total real
ruby32 0.393966 0.101122 0.495088 ( 0.495235)
ruby33 0.493963 0.089521 0.583484 ( 0.584091)
ruby33+MN 0.639333 0.200843 0.840176 ( 0.840291) <- Slow
this+MN 0.512231 0.099091 0.611322 ( 0.611074) <- Good
```
Introduce `thread_io_wait_events()` to make 1 function to call
`thread_sched_wait_events()`.
In ``thread_io_wait_events()`, manipulate `waiting_fd` to raise
an exception when closing the IO correctly.
* When we have the thread already, it saves a lookup
* `event_wait`, not `kq`
Clean up the `thread_sched_wait_events_timeval` calls
* By handling the PTHREAD check inside the function, all the other code can become much simpler and just call the function directly without additional checks
* Allows macOS users to use M:N threads (and technically FreeBSD, though it has not been verified on FreeBSD)
* Include sys/event.h header check for macros, and include sys/event.h when present
* Rename epoll_fd to more generic kq_fd (Kernel event Queue) for use by both epoll and kqueue
* MAP_STACK is not available on macOS so conditionall apply it to mmap flags
* Set fd to close on exec
* Log debug messages specific to kqueue and epoll on creation
* close_invalidate raises an error for the kqueue fd on child process fork. It's unclear rn if that's a bug, or if it's kqueue specific behavior
Use kq with rb_thread_wait_for_single_fd
* Only platforms with `USE_POLL` (linux) had changes applied to take advantage of kernel event queues. It needed to be applied to the `select` so that kqueue could be properly applied
* Clean up kqueue specific code and make sure only flags that were actually set are removed (or an error is raised)
* Also handle kevent specific errnos, since most don't apply from epoll to kqueue
* Use the more platform standard close-on-exec approach of `fcntl` and `FD_CLOEXEC`. The io-event gem uses `ioctl`, but fcntl seems to be the recommended choice. It is also what Go, Bun, and Libuv use
* We're making changes in this file anyways - may as well fix a couple spelling mistakes while here
Make sure FD_CLOEXEC carries over in dup
* Otherwise the kqueue descriptor should have FD_CLOEXEC, but doesn't and fails in assert_close_on_exec
`thread_sched_wait_events()` suspend the thread until the target
fd is ready. Howver, other threads can close the target fd and
suspended thread should be awake. To support it, setup `waiting_fd`
before `thread_sched_wait_events()`.
`rb_thread_io_wake_pending_closer()` should be called before
`RUBY_VM_CHECK_INTS_BLOCKING()` because it can return this function.
This patch introduces additional overhead (setup/cleanup `waiting_fd`)
and maybe we can reduce the overhead.
Our current implementation of rb_postponed_job_register suffers from
some safety issues that can lead to interpreter crashes (see bug #1991).
Essentially, the issue is that jobs can be called with the wrong
arguments.
We made two attempts to fix this whilst keeping the promised semantics,
but:
* The first one involved masking/unmasking when flushing jobs, which
was believed to be too expensive
* The second one involved a lock-free, multi-producer, single-consumer
ringbuffer, which was too complex
The critical insight behind this third solution is that essentially the
only user of these APIs are a) internal, or b) profiling gems.
For a), none of the usages actually require variable data; they will
work just fine with the preregistration interface.
For b), generally profiling gems only call a single callback with a
single piece of data (which is actually usually just zero) for the life
of the program. The ringbuffer is complex because it needs to support
multi-word inserts of job & data (which can't be atomic); but nobody
actually even needs that functionality, really.
So, this comit:
* Introduces a pre-registration API for jobs, with a GVL-requiring
rb_postponed_job_prereigster, which returns a handle which can be
used with an async-signal-safe rb_postponed_job_trigger.
* Deprecates rb_postponed_job_register (and re-implements it on top of
the preregister function for compatability)
* Moves all the internal usages of postponed job register
pre-registration
This patch introduces thread specific storage APIs
for tools which use `rb_internal_thread_event_hook` APIs.
* `rb_internal_thread_specific_key_create()` to create a tool specific
thread local storage key and allocate the storage if not available.
* `rb_internal_thread_specific_set()` sets a data to thread and tool
specific storage.
* `rb_internal_thread_specific_get()` gets a data in thread and tool
specific storage.
Note that `rb_internal_thread_specific_get|set(thread_val, key)`
can be called without GVL and safe for async signal and safe for
multi-threading (native threads). So you can call it in any internal
thread event hooks. Further more you can call it from other native
threads. Of course `thread_val` should be living while accessing the
data from this function.
Note that you should not forget to clean up the set data.
This entirely changes how it is tested. Rather than to use counters
we now record the timeline of events with associated threads which
makes it much easier to assert that certains events are only preceded
by a specific event, and makes it much easier to debug unexpected
timelines.
Co-Authored-By: Étienne Barrié <etienne.barrie@gmail.com>
Co-Authored-By: JP Camara <jp@jpcamara.com>
Co-Authored-By: John Hawthorn <john@hawthorn.email>
Context: https://github.com/ivoanjo/gvl-tracing/pull/4
Some hooks may want to collect data on a per thread basis.
Right now the only way to identify the concerned thread is to
use `rb_nativethread_self()` or similar, but even then because
of the thread cache or MaNy, two distinct Ruby threads may report
the same native thread id.
By passing `thread->self`, hooks can use it as a key to store
the metadata.
NB: Most hooks are executed outside the GVL, so such data collection
need to use a thread-safe data-structure, and shouldn't use the
reference in other ways from inside the hook.
They must also either pin that value or handle compaction.
With M:N thread scheduler, the native thread (NT) related resources
should be freed when the NT is no longer needed. So the calling
`native_thread_destroy()` at the end of `is will be freed when
`thread_cleanup_func()` (at the end of Ruby thread) is not correct
timing. Call it when the corresponding Ruby thread is collected.
This patch introduce M:N thread scheduler for Ractor system.
In general, M:N thread scheduler employs N native threads (OS threads)
to manage M user-level threads (Ruby threads in this case).
On the Ruby interpreter, 1 native thread is provided for 1 Ractor
and all Ruby threads are managed by the native thread.
From Ruby 1.9, the interpreter uses 1:1 thread scheduler which means
1 Ruby thread has 1 native thread. M:N scheduler change this strategy.
Because of compatibility issue (and stableness issue of the implementation)
main Ractor doesn't use M:N scheduler on default. On the other words,
threads on the main Ractor will be managed with 1:1 thread scheduler.
There are additional settings by environment variables:
`RUBY_MN_THREADS=1` enables M:N thread scheduler on the main ractor.
Note that non-main ractors use the M:N scheduler without this
configuration. With this configuration, single ractor applications
run threads on M:1 thread scheduler (green threads, user-level threads).
`RUBY_MAX_CPU=n` specifies maximum number of native threads for
M:N scheduler (default: 8).
This patch will be reverted soon if non-easy issues are found.
[Bug #19842]
When interrupt behavior is configured for all possible exceptions using
'Exception', there's no need to iterate the pending exception's
ancestors for hash lookups.
More significantly, by storing the catch-all timing symbol directly in
the mask stack, we can skip allocating the hash we would otherwise need.
If the supplied hash is already frozen and compare-by-identity, we can
use it directly (still checking its contents are valid symbols), without
making a new copy.
According to the C99 specification section 7.20.3.2 paragraph 2:
> If ptr is a null pointer, no action occurs.
So we do not need to check that the pointer is a null pointer.
Because a thread calling IO#close now blocks in a native condvar wait,
it's possible for there to be _no_ threads left to actually handle
incoming signals/ubf calls/etc.
This manifested as failing tests on Solaris 10 (SPARC), because:
* One thread called IO#close, which sent a SIGVTALRM to the other
thread to interrupt it, and then waited on the condvar to be notified
that the reading thread was done.
* One thread was calling IO#read, but it hadn't yet reached the actual
call to select(2) when the SIGVTALRM arrived, so it never unblocked
itself.
This results in a deadlock.
The fix is to use a real Ruby mutex for the close lock; that way, the
closing thread goes into sigwait-sleep and can keep trying to interrupt
the select(2) thread.
See the discussion in: https://github.com/ruby/ruby/pull/7865/
When one thread is closing a file descriptor whilst another thread is
concurrently reading it, we need to wait for the reading thread to be
done with it to prevent a potential EBADF (or, worse, file descriptor
reuse).
At the moment, that is done by keeping a list of threads still using the
file descriptor in io_close_fptr. It then continually calls
rb_thread_schedule() in fptr_finalize_flush until said list is empty.
That busy-looping seems to behave rather poorly on some OS's,
particulary FreeBSD. It can cause the TestIO#test_race_gets_and_close
test to fail (even with its very long 200 second timeout) because the
closing thread starves out the using thread.
To fix that, I introduce the concept of struct rb_io_close_wait_list; a
list of threads still using a file descriptor that we want to close. We
call `rb_notify_fd_close` to let the thread scheduler know we're closing
a FD, which fills the list with threads. Then, we call
rb_notify_fd_close_wait which will block the thread until all of the
still-using threads are done.
This is implemented with a condition variable sleep, so no busy-looping
is required.
This patch fixes a potential busy-loop in the thread scheduler. If there
are two threads, the main thread (where Ruby signal handlers must run)
and a sleeping thread, it is possible for the following sequence of
events to occur:
* The sleeping thread is in native_sleep -> sigwait_sleep A signal
* arives, kicking this thread out of rb_sigwait_sleep The sleeping
* thread calls THREAD_BLOCKING_END and eventually
thread_sched_to_running_common
* the sleeping thread writes into the sigwait_fd pipe by calling
rb_thread_wakeup_timer_thread
* the sleeping thread re-loops around in native_sleep() because
the desired sleep time has not actually yet expired
* that calls rb_sigwait_sleep again the ppoll() in rb_sigwait_sleep
* immediately returns because
of the byte written into the sigwait_fd by
rb_thread_wakeup_timer_thread
* that wakes the thread up again and kicks the whole cycle off again.
Such a loop can only be broken by the main thread waking up and handling
the signal, such that ubf_threads_empty() below becomes true again;
however this loop can actually keep things so busy (and cause so much
contention on the main thread's interrupt_lock) that the main thread
doesn't deal with the signal for many seconds. This seems particuarly
likely on FreeBSD 13.
(the cycle can also be broken by the sleeping thread finally elapsing
its desired sleep time).
The fix for _this_ loop is to only wakeup the timer thrad in
thread_sched_to_running_common if the current thread is not itself the
sigwait thread.
An almost identical loop also happens in the same circumstances because
the call to check_signals_nogvl (through sigwait_timeout) in
rb_sigwait_sleep returns true if there is any pending signal for the
main thread to handle. That then causes rb_sigwait_sleep to skip over
sleeping entirely.
This is unnescessary and counterproductive, I believe; if the main
thread needs to be woken up that is done inline in check_signals_nogvl
anyway.
See https://bugs.ruby-lang.org/issues/19680
because of 9720f5ac89http://rubyci.s3.amazonaws.com/solaris11-sunc/ruby-master/log/20230403T130011Z.fail.html.gz
```
1) Failure:
TestThread#test_signal_at_join [/export/home/chkbuild/chkbuild-sunc/tmp/build/20230403T130011Z/ruby/test/ruby/test_thread.rb:1488]:
Exception raised:
<#<fatal:"No live threads left. Deadlock?\n1 threads, 1 sleeps current:0x00891288 main thread:0x00891288\n* #<Thread:0xfef89a18 sleep_forever>\n rb_thread_t:0x00891288 native:0x00000001 int:0\n \n">>
Backtrace:
-:30:in `join'
-:30:in `block (3 levels) in <main>'
-:21:in `times'
-:21:in `block (2 levels) in <main>'.
```
The mechanism:
* Main thread (M) calls `Thread#join`
* M: calls `sleep_forever()`
* M: set `th->status = THREAD_STOPPED_FOREVER`
* M: do `checkints`
* M: handle a trap handler with `th->status = THREAD_RUNNABLE`
* M: thread switch at the end of the trap handler
* Another thread (T) will process `Thread#kill` by M.
* T: `rb_threadptr_join_list_wakeup()` at the end of T tris to wakeup M,
but M's state is runnable because M is handling trap handler and
just ignore the waking up and terminate T$a
* T: switch to M.
* M: after the trap handler, reset `th->status = THREAD_STOPPED_FOREVER`
and check deadlock -> Deadlock because only M is living.
To avoid such situation, add new sleep flags `SLEEP_ALLOW_SPURIOUS`
and `SLEEP_NO_CHECKINTS` to skip any check ints.
BTW this is instentional to leave second `vm_check_ints_blocking()`
without checking `SLEEP_NO_CHECKINTS` because `SLEEP_ALLOW_SPURIOUS`
should be specified with `SLEEP_NO_CHECKINTS` and skipping this
checkints can skip any interrupts.
* Revert "Remove special handling of `SIGCHLD`. (#7482)"
This reverts commit 44a0711eab.
* Revert "Remove prototypes for functions that are no longer used. (#7497)"
This reverts commit 4dce12bead.
* Revert "Remove SIGCHLD `waidpid`. (#7476)"
This reverts commit 1658e7d966.
* Fix change to rjit variable name.
Nobuyoshi Nakada
KJ Tsanaktsidis
KJ Tsanaktsidis
Koichi Sasada
JP Camara
Jean Boussier
Matthew Draper
Peter Zhu
Samuel Williams
git
Matt Valentine-House
Takashi Kokubun