by launching MJIT worker thread in child Ruby process.
See the comment before `mjit_child_after_fork` for details.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65785 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* hash.c, internal.h: support theap for small Hash.
Introduce RHASH_ARRAY (li_table) besides st_table and small Hash
(<=8 entries) are managed by an array data structure.
This array data can be managed by theap.
If st_table is needed, then converting array data to st_table data.
For st_table using code, we prepare "stlike" APIs which accepts hash value
and are very similar to st_ APIs.
This work is based on the GSoC achievement
by tacinight <tacingiht@gmail.com> and refined by ko1.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65454 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Following how mjit_worker.c currently works, rb_f_system
now ensures the VM-wide waitpid lists is locked before
creating a new process via fork/vfork.
This ensures other rb_waitpid callers cannot steal work and
there are no possible race conditions from toggling
ruby_nocldwait without the use of atomics.
This sets us up for implementing MJIT process management
logic using normal Ruby APIs prepares us for VM-wide
asynchronous/event-base waitpid which can allow MJIT to
work without worker threads.
Take 2: set waitpid_state.pid on platforms w/o fork.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65437 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Following how mjit_worker.c currently works, rb_f_system
now ensures the VM-wide waitpid lists is locked before
creating a new process via fork/vfork.
This ensures other rb_waitpid callers cannot steal work and
there are no possible race conditions from toggling
ruby_nocldwait without the use of atomics.
This sets us up for implementing MJIT process management
logic using normal Ruby APIs prepares us for VM-wide
asynchronous/event-base waitpid which can allow MJIT to
work without worker threads.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65434 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_hrtime_t is a more pleasant type to use and this can make
future changes around sleeping/scheduling easier.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65182 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (check_exec_redirect): use RARRAY_AREF() instead of
using RARRAY_PTR().
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64987 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This is the safer option, as there seems to be cases where checking
waitpid_state.ret is insufficient in ensure. I'm not 100% sure
why this is, but this change was required for my work-in-progress
Thread::Light patch series, too...
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64782 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Oddly, all existing test cases passed multiple times
before this patch (even with --jit-wait), so this seems
like a difficult failure to prove.
Fixes: r64576 ("process.c: simplify SIGCHLD-based waitpid")
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64577 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Introduce a new rb_thread_sleep_interruptible that does not
execute interrupts before sleeping. Skipping the interrupt
check before sleep is required for out-of-GVL ruby_waitpid_all
to function properly when setting waitpid_state.ret
Now that ubf_select can be called by the gvl.timer thread
without recursive locking gvl.lock, we can safely use
rb_threadptr_interrupt to deal with waking up sleeping
processes,
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64576 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
It is identical to do_waitpid, and the win32 version will not
be needed for MJIT (since win32 does not suffer from the
waitpid(-1, ...) conflict where waits can get stolen.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64541 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This re-reverts commit r64447.
The issue was machine side problem.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64493 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (ruby_waitpid_all): nothing to do unless SIGCHLD is
available.
* signal.c (ruby_nocldwait): used only if SIGCHLD is available.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64407 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Arbitrarily closing file descriptors on exec breaks use cases
where a Ruby process sets up a descriptor for non-Ruby children
to use. For example, the "rake foo" target may spawn any number
of subprocesses (Ruby or not) which depends on parsing the "FOO"
environment variable for out_fd:99 and writing to foo.out
FOO=out_fd:99 rake foo 99>>foo.out
Unfortunately, this introduced one incompatibility in
test/lib/test/unit.rb and it now requires explicitly setting
IO#close_on_exec=true
[ruby-core:88007] [Misc #14907]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64399 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We do not need to rely on SIGVTALRM for non-sighandler wakeups.
This will reduce spurious wakeups in cases where sigwait_fd
is not grabbed again, soon.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64389 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This reverts commit 194a6a2c68 (r64203).
Race conditions which caused the original reversion will be fixed
in the subsequent commit.
[ruby-core:88360] [Misc #14937]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64352 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
getgroups(2) may return a GID list that includes duplicated GIDs.
The behavior is totaly depends on what OS is used.
This commit fixes the example of Process.groups so that the example
is independent of this OS-dependent features.
Additonaly, this commit adds the description of such system-dependent
characteristics of Process.groups.
[ruby-dev:50603] [Bug #14969]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64265 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
by sharing it with vm.c in internal.h.
vm.c: ditto
internal.h: ditto
mjit.h: share more.
mjit.c: make sure the third arguemnt is not used
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64253 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
w->cond may be changed without our knowledge in waitpid_nogvl
without th->interrupt_lock
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64201 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Once a thread has acquired sigwait_fd, hold onto it until
waitpid is complete. This prevents unnecessary migration
and atomic operations.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64200 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We don't use pthreads cancellation ourselves and it's painful to
use correctly. Any cancelled threads would break
vm->living_threads, GVL, thread_sync.c, autoload, etc...
So don't bother caring; because we can't stop rogue extensions
from completely breaking the VM in other ways, either.
[ruby-core:88282] [Misc #14962]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64197 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We see several occurrence of "diagnostic push/pop" so why not
make them macros. Tested on GCC8 / Clang 6.
Note that ruby.h is intentionally left untouched because we don't
want to introduce new public macros.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64118 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We reuse sleep_cond for waitpid notifications as well as GVL
waiting. So we must take care to not hold onto sleep_cond
when we try to reacquire GVL.
[ruby-core:88183]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64117 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
To reduce resource use and reduce CI failure; remove
timer-thread. Single-threaded Ruby processes (including forked
children) will never see extra thread overhead. This prevents
glibc and jemalloc from going into multi-threaded mode and
initializing locks or causing fragmentation via arena explosion.
The GVL is implements its own wait-queue as a ccan/list to
permit controlling wakeup order. Timeslice under contention is
handled by a designated timer thread (similar to choosing a
"patrol_thread" for current deadlock checking).
There is only one self-pipe, now, as wakeups for timeslice are
done independently using condition variables. This reduces FD
pressure slightly.
Signal handling is handled directly by a Ruby Thread (instead
of timer-thread) by exposing signal self-pipe to callers of
rb_thread_fd_select, native_sleep, rb_wait_for_single_fd, etc...
Acquiring, using, and releasing the self-pipe is exposed via 4
new internal functions:
1) rb_sigwait_fd_get - exclusively acquire timer_thread_pipe.normal[0]
2) rb_sigwait_fd_sleep - sleep and wait for signal (and no other FDs)
3) rb_sigwait_fd_put - release acquired result from rb_sigwait_fd_get
4) rb_sigwait_fd_migrate - migrate signal handling to another thread
after calling rb_sigwait_fd_put.
rb_sigwait_fd_migrate is necessary for waitpid callers because
only one thread can wait on self-pipe at a time, otherwise a
deadlock will occur if threads fight over the self-pipe.
TRAP_INTERRUPT_MASK is now set for the main thread directly in
signal handler via rb_thread_wakeup_timer_thread.
Originally, I wanted to use POSIX timers
(timer_create/timer_settime) for this. Unfortunately, this
proved unfeasible as Mutex#sleep resumes on spurious wakeups and
test/thread/test_cv.rb::test_condvar_timed_wait failed. Using
pthread_sigmask to mask out SIGVTALRM fixed that test, but
test/fiddle/test_function.rb::test_nogvl_poll proved there'd be
some unavoidable (and frequent) incompatibilities from that
approach.
Finally, this allows us to drop thread_destruct_lock and
interrupt current ec directly.
We don't need to rely on vm->thread_destruct_lock or a coherent
vm->running_thread on any platform. Separate timer-thread for
time slice and signal handling is relegated to thread_win32.c,
now.
[ruby-core:88088] [Misc #14937]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64107 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* process.c (before_fork_ruby, after_fork_ruby): used only if fork()
or daemon() is available.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64065 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
http://ci.rvm.jp/results/trunk-asserts-nopara@silicon-docker/1149270
```
/home/ko1/ruby/src/trunk-asserts-nopara/process.c: In function 'assert_close_on_exec':
/home/ko1/ruby/src/trunk-asserts-nopara/process.c:298:9: warning: ignoring return value of 'write', declared with attribute warn_unused_result [-Wunused-result]
(void)write(2, m, sizeof(m) - 1);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
workaround from https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66425#c34
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64029 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* include/ruby/ruby.h (UNREACHABLE_RETURN): UNREACHABLE at the end
of non-void functions.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64025 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
There's actually no need to close the pipes used by the
sleepy timer thread before forking, only to stop the timer
thread itself.
Instead, we only close the parent pipes in the child process,
either via close-on-exec flag or when reinitializing the timer
thread.
This change will be necessary when we allow
rb_wait_for_single_fd and rb_thread_fd_select to wait on the
timer_thread_pipe.normal[0] directly and eliminate timer thread.
I don't anticipate compatibility problems with this change
alone.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63960 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We need to preserve "IGNORE" behavior from Ruby 2.5 and earlier.
We can't rely on SA_NOCLDWAIT any more, since we always need
system() and MJIT to work; so we fake that behavior using
dedicated reaper (currently in timer-thread).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63879 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Non-parallel "make test-spec" caused
spec/ruby/core/process/wait2_spec.rb failures because mspec
uses "exec" in single-process mode, so there's no chance
the post-exec state could know about the MJIT child process
from its pre-exec state.
[ruby-core:87846] [Bug #14867]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63877 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Reading win32/win32.c waitpid implementation, maybe waitpid(-1, ...)
on that platform will never conflict with mjit use of waitpid.
In any case, I've added WAITPID_USE_SIGCHLD macro to vm_core.h
so it can be easy for Linux/BSD users to test (hopefully!)
win32-compatible code.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63855 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The change is unstable on Windows. Please re-commit it when it correctly
supports Windows.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63852 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
For systems with lossy SIGCHLD, an infinitely sleeping timer
thread needs to be aware of rb_waitpid callers in the first
place before it can check and reset polling status.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63829 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Basically in win32, mjit.c seems to work directly on spawnvp
result while normal Ruby code wraps process handles to look
like *nix PIDs. I'm only guessing, here...
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63797 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Some systems lack SIGCHLD or have incomplete SIGCHLD
implementations. So enable polling mode for them.
[ruby-core:87705] [Bug #14867]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63795 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
It's a bit redundant, but we optimize for platforms with
SIGCHLD, not without.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63790 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We may be interrupted by another thread after setting ubf,
but before we re-acquire interrupt_lock again to sleep on
w->cond.
This should fix test_wait_interrupt in test/ruby/test_process.rb
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63789 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
svn
k0kubun
ko1
normal
stomar
naruse
nobu
kazu
mrkn
shyouhei