```
1) Failure:
TestThreadInstrumentation#test_thread_instrumentation [/tmp/ruby/src/trunk-repeat20-asserts/test/-ext-/thread/test_instrumentation_api.rb:33]:
Call counters[4]: [3, 4, 4, 4, 0].
Expected 0 to be > 0.
```
We fire the EXIT hook after the call to `thread_sched_to_dead` which
mean another thread might be running before the `EXIT` hook have been
executed.
GCC warns of empty format strings, perhaps because they have no
effects in printf() and there are better ways than sprintf().
However, ruby_debug_log() adds informations other than the format,
this warning is not the case.
[Feature #18339]
After experimenting with the initial version of the API I figured there is a need
for an exit event to cleanup instrumentation data. e.g. if you record data in a
{thread_id -> data} table, you need to free associated data when a thread goes away.
Ref: https://bugs.ruby-lang.org/issues/18339
Design:
- This tries to minimize the overhead when no hook is registered.
It should only incur an extra unsynchronized boolean check.
- The hook list is protected with a read-write lock as to cause
contention when some hooks are registered.
- The hooks MUST be thread safe, and MUST NOT call into Ruby as they
are executed outside the GVL.
- It's simply a noop on Windows.
API:
```
rb_internal_thread_event_hook_t * rb_internal_thread_add_event_hook(rb_internal_thread_event_callback callback, rb_event_flag_t internal_event, void *user_data);
bool rb_internal_thread_remove_event_hook(rb_internal_thread_event_hook_t * hook);
```
You can subscribe to 3 events:
- READY: called right before attempting to acquire the GVL
- RESUMED: called right after successfully acquiring the GVL
- SUSPENDED: called right after releasing the GVL.
The hooks MUST be threadsafe, as they are executed outside of the GVL, they also MUST NOT call any Ruby API.
`rb_thread_t` contained `native_thread_data_t` to represent
thread implementation dependent data. This patch separates
them and rename it `rb_native_thread` and point it from
`rb_thraed_t`.
Now, 1 Ruby thread (`rb_thread_t`) has 1 native thread (`rb_native_thread`).
Now GVL is not process *Global* so this patch try to use
another words.
* `rb_global_vm_lock_t` -> `struct rb_thread_sched`
* `gvl->owner` -> `sched->running`
* `gvl->waitq` -> `sched->readyq`
* `rb_gvl_init` -> `rb_thread_sched_init`
* `gvl_destroy` -> `rb_thread_sched_destroy`
* `gvl_acquire` -> `thread_sched_to_running` # waiting -> ready -> running
* `gvl_release` -> `thread_sched_to_waiting` # running -> waiting
* `gvl_yield` -> `thread_sched_yield`
* `GVL_UNLOCK_BEGIN` -> `THREAD_BLOCKING_BEGIN`
* `GVL_UNLOCK_END` -> `THREAD_BLOCKING_END`
* removed
* `rb_ractor_gvl`
* `rb_vm_gvl_destroy` (not used)
There are GVL functions such as `rb_thread_call_without_gvl()` yet
but I don't have good name to replace them. Maybe GVL stands for
"Greate Valuable Lock" or something like that.
To make some kind of Ractor related extensions, some functions
should be exposed.
* include/ruby/thread_native.h
* rb_native_mutex_*
* rb_native_cond_*
* include/ruby/ractor.h
* RB_OBJ_SHAREABLE_P(obj)
* rb_ractor_shareable_p(obj)
* rb_ractor_std*()
* rb_cRactor
and rm ractor_pub.h
and rename srcdir/ractor.h to srcdir/ractor_core.h
(to avoid conflict with include/ruby/ractor.h)
The timer function used on windows system set timer interrupt
flag of current main ractor's executing ec and thread can detect
the end of time slice. However, to set all ec->interrupt_flag for
all running ractors, it is requires to synchronize with other ractors.
However, timer thread can not acquire the ractor-wide lock because
of some limitation.
To solve this issue, this patch introduces USE_VM_CLOCK compile option
to introduce rb_vm_t::clock. This clock will be incremented by the
timer thread and each thread can check the incrementing by comparison
with previous checked clock. At last, on windows platform this patch
introduces some overhead, but I think there is no critical performance
issue because of this modification.
This commit introduces Ractor mechanism to run Ruby program in
parallel. See doc/ractor.md for more details about Ractor.
See ticket [Feature #17100] to see the implementation details
and discussions.
[Feature #17100]
This commit does not complete the implementation. You can find
many bugs on using Ractor. Also the specification will be changed
so that this feature is experimental. You will see a warning when
you make the first Ractor with `Ractor.new`.
I hope this feature can help programmers from thread-safety issues.
We need another native thread to call some unblocking functions
which aren't RUBY_UBF_IO or RUBY_UBF_PROCESS. Instead of a
permanent thread in <= 2.5, we can now rely on the thread cache
feature to perform interrupts.
[ruby-core:90865] [Bug #15499]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66708 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.ac: introduce new configure option `--enable-mjit` and
`--disable-mjit`. Default is "enable".
`--disable-mjit` disables all of MJIT features so that `ruby --jit`
can't enable MJIT.
This option affect a macro `USE_MJIT`.
This change remove `--enable/disable-install-mjit-header` option.
* Makefile.in: introduce the `ENABLE_MJIT` variable.
* common.mk: use `ENABLE_MJIT` option.
* internal.h: respect `USE_MJIT`. Same as other *.c, *.h.
* test/ruby/test_jit.rb: check `ENABLE_MJIT` key of rbconfg.rb.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65204 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_hrtime_t is a more pleasant type to use and this can make
future changes around sleeping/scheduling easier.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65182 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Relying on "struct timespec" was too annoying API-wise and
used more stack space. "double" was a bit wacky w.r.t rounding
in the past, so now we'll switch to using a 64-bit type.
Unsigned 64-bit integer is able to give us over nearly 585
years of range with nanoseconds. This range is good enough
for the Linux kernel internal time representation, so it
ought to be good enough for us.
This reduces the stack usage of functions while GVL is held
(and thus subject to marking) on x86-64 Linux (with ppoll):
rb_wait_for_single_fd 120 => 104
do_select 120 => 88
[ruby-core:88582] [Misc #15014]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64533 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
It's possible for the ubf_list_head to be populated with dead
threads at fork or the ubf_list_lock to be held, so reinitialize
both at startup.
And while we're at it, use a static initializer at startup
to save a library call and kill some ifdef.
[ruby-core:88578] [Bug #15013]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64485 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Same reasoning as the disarm in rb_sigwait_fd_get, the current
thread is already processing signals, so we do not need
UBF_TIMER to continually kick the process, anymore.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64390 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This reverts commit 194a6a2c68 (r64203).
Race conditions which caused the original reversion will be fixed
in the subsequent commit.
[ruby-core:88360] [Misc #14937]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64352 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We need to be able to perform periodic ubf_list wakeups when a
thread is sleeping and waiting on signals.
[ruby-core:88088] [Misc #14937] [Bug #5343]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64115 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
To reduce resource use and reduce CI failure; remove
timer-thread. Single-threaded Ruby processes (including forked
children) will never see extra thread overhead. This prevents
glibc and jemalloc from going into multi-threaded mode and
initializing locks or causing fragmentation via arena explosion.
The GVL is implements its own wait-queue as a ccan/list to
permit controlling wakeup order. Timeslice under contention is
handled by a designated timer thread (similar to choosing a
"patrol_thread" for current deadlock checking).
There is only one self-pipe, now, as wakeups for timeslice are
done independently using condition variables. This reduces FD
pressure slightly.
Signal handling is handled directly by a Ruby Thread (instead
of timer-thread) by exposing signal self-pipe to callers of
rb_thread_fd_select, native_sleep, rb_wait_for_single_fd, etc...
Acquiring, using, and releasing the self-pipe is exposed via 4
new internal functions:
1) rb_sigwait_fd_get - exclusively acquire timer_thread_pipe.normal[0]
2) rb_sigwait_fd_sleep - sleep and wait for signal (and no other FDs)
3) rb_sigwait_fd_put - release acquired result from rb_sigwait_fd_get
4) rb_sigwait_fd_migrate - migrate signal handling to another thread
after calling rb_sigwait_fd_put.
rb_sigwait_fd_migrate is necessary for waitpid callers because
only one thread can wait on self-pipe at a time, otherwise a
deadlock will occur if threads fight over the self-pipe.
TRAP_INTERRUPT_MASK is now set for the main thread directly in
signal handler via rb_thread_wakeup_timer_thread.
Originally, I wanted to use POSIX timers
(timer_create/timer_settime) for this. Unfortunately, this
proved unfeasible as Mutex#sleep resumes on spurious wakeups and
test/thread/test_cv.rb::test_condvar_timed_wait failed. Using
pthread_sigmask to mask out SIGVTALRM fixed that test, but
test/fiddle/test_function.rb::test_nogvl_poll proved there'd be
some unavoidable (and frequent) incompatibilities from that
approach.
Finally, this allows us to drop thread_destruct_lock and
interrupt current ec directly.
We don't need to rely on vm->thread_destruct_lock or a coherent
vm->running_thread on any platform. Separate timer-thread for
time slice and signal handling is relegated to thread_win32.c,
now.
[ruby-core:88088] [Misc #14937]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64107 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
pthread_atfork is not idempotent and repeatedly calling it
causes it to register the same hook repeatedly; leading to
unbound memory growth.
Ruby already has a (confusing-named) internal API for to call
in the forked child process: rb_thread_atfork
Call the MJIT child_after_fork hook inside that to prevent
unbound growth with the following loop:
loop do
RubyVM::MJIT.pause
RubyVM::MJIT.resume
end
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63884 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This allows native_sleep to use less stack (80 -> 64 bytes on
x86-64) for GVL_UNLOCK_BEGIN/END. For future APIs, we will pass
`ec` or `th` around anyways, so the BLOCKING_REGION change
should be beneficial in the future.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63448 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
There's no reason to use CLOCK_REALTIME for any condvars in Ruby.
Indeed, we initialized all condvars with RB_CONDATTR_CLOCK_MONOTONIC
anyway; so simplify our code and reduce ifdefs.
[ruby-core:85639] [Misc #14497]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63238 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This results in fewer conversion on common modern systems with
support for clock_gettime, pthread_cond_timedwait and ppoll.
gettimeofday is declared obsolete by POSIX.1-2008, so it is yet
another reason to move away from it. This also appears to result
in the reduction of compatibility code required for dealing
with inconsistent implementations of "struct timeval".tv_sec
In the future, this will also result in fewer conversions for
kqueue and pselect if we elect to use them.
[ruby-core:85416] [Feature #14452]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62272 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
that allows to JIT-compile Ruby methods by generating C code and
using C compiler. See the first comment of mjit.c to know what this
file does.
mjit.c is authored by Vladimir Makarov <vmakarov@redhat.com>.
After he invented great method JIT infrastructure for MRI as MJIT,
Lars Kanis <lars@greiz-reinsdorf.de> sent the patch to support MinGW
in MJIT. In addition to merging it, I ported pthread to Windows native
threads. Now this MJIT infrastructure can be compiled on Visual Studio.
This commit simplifies mjit.c to decrease code at initial merge. For
example, this commit does not provide multiple JIT threads support.
We can resurrect them later if we really want them, but I wanted to minimize
diff to make it easier to review this patch.
`/tmp/_mjitXXX` file is renamed to `/tmp/_ruby_mjitXXX` because non-Ruby
developers may not know the name "mjit" and the file name should make
sure it's from Ruby and not from some harmful programs. TODO: it may be
better to store this to some temporary directory which Ruby is already using
by Tempfile, if it's not bad for performance.
mjit.h: New. It has `mjit_exec` interface similar to `vm_exec`, which is
for triggering MJIT. This drops interface for AOT compared to the original
MJIT.
Makefile.in: define macros to let MJIT know the path of MJIT header.
Probably we can refactor this to reduce the number of macros (TODO).
win32/Makefile.sub: ditto.
common.mk: compile mjit.o and mjit_compile.o. Unlike original MJIT, this
commit separates MJIT infrastructure and JIT compiler code as independent
object files. As initial patch is NOT going to have ultra-fast JIT compiler,
it's likely to replace JIT compiler, e.g. original MJIT's compiler or some
future JIT impelementations which are not public now.
inits.c: define MJIT module. This is added because `MJIT.enabled?` was
necessary for testing.
test/lib/zombie_hunter.rb: skip if `MJIT.enabled?`. Obviously this
wouldn't work with current code when JIT is enabled.
test/ruby/test_io.rb: skip this too. This would make no sense with MJIT.
ruby.c: define MJIT CLI options. As major difference from original MJIT,
"-j:l"/"--jit:llvm" are renamed to "--jit-cc" because I want to support
not only gcc/clang but also cl.exe (Visual Studio) in the future. But it
takes only "--jit-cc=gcc", "--jit-cc=clang" for now. And only long "--jit"
options are allowed since some Ruby committers preferred it at Ruby
developers Meeting on January, and some of options are renamed.
This file also triggers to initialize MJIT thread and variables.
eval.c: finalize MJIT worker thread and variables.
test/ruby/test_rubyoptions.rb: fix number of CLI options for --jit.
thread_pthread.c: change for pthread abstraction in MJIT. Prefix rb_ for
functions which are used by other files.
thread_win32.c: ditto, for Windows. Those pthread porting is one of major
works that YARV-MJIT created, which is my fork of MJIT, in Feature 14235.
thread.c: follow rb_ prefix changes
vm.c: trigger MJIT call on VM invocation. Also trigger `mjit_mark` to avoid
SEGV by race between JIT and GC of ISeq. The improvement was provided by
wanabe <s.wanabe@gmail.com>.
In JIT compiler I created and am going to add in my next commit, I found
that having `mjit_exec` after `vm_loop_start:` is harmful because the
JIT-ed function doesn't proceed other ISeqs on RESTORE_REGS of leave insn.
Executing non-FINISH frame is unexpected for my JIT compiler and
`exception_handler` triggers executions of such ISeqs. So `mjit_exec`
here should be executed only when it directly comes from `vm_exec` call.
`RubyVM::MJIT` module and `.enabled?` method is added so that we can skip
some tests which don't expect JIT threads or compiler file descriptors.
vm_insnhelper.h: trigger MJIT on method calls during VM execution.
vm_core.h: add fields required for mjit.c. `bp` must be `cfp[6]` because
rb_control_frame_struct is likely to be casted to another struct. The
last position is the safest place to add the new field.
vm_insnhelper.c: save initial value of cfp->ep as cfp->bp. This is an
optimization which are done in both MJIT and YARV-MJIT. So this change
is added in this commit. Calculating bp from ep is a little heavy work,
so bp is kind of cache for it.
iseq.c: notify ISeq GC to MJIT. We should know which iseq in MJIT queue
is GCed to avoid SEGV. TODO: unload some GCed units in some safe way.
gc.c: add hooks so that MJIT can wait GC, and vice versa. Simultaneous
JIT and GC executions may cause SEGV and so we should synchronize them.
cont.c: save continuation information in MJIT worker. As MJIT shouldn't
unload JIT-ed code which is being used, MJIT wants to know full list of
saved execution contexts for continuation and detect ISeqs in use.
mjit_compile.c: added empty JIT compiler so that you can reuse this commit
to build your own JIT compiler. This commit tries to compile ISeqs but
all of them are considered as not supported in this commit. So you can't
use JIT compiler in this commit yet while we added --jit option now.
Patch author: Vladimir Makarov <vmakarov@redhat.com>.
Contributors:
Takashi Kokubun <takashikkbn@gmail.com>.
wanabe <s.wanabe@gmail.com>.
Lars Kanis <lars@greiz-reinsdorf.de>.
Part of Feature 12589 and 14235.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62189 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
to unify signature with pthread's one
I'm planning to use functions for rb_nativethread_cond_t and
rb_nativethread_mutex_t in the future JIT introduction.
In that case, I want them to have the same signature. To prevent the case
that its return value is used in somewhere and it becomes harder to unify
signature, I want to drop unused return value.
[close GH-1751]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60811 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
to represent execution context [Feature #14038]
* vm_core.h (rb_thread_t): rb_thread_t::ec is now a pointer.
There are many code using `th` to represent execution context
(such as cfp, VM stack and so on). To access `ec`, they need to
use `th->ec->...` (adding one indirection) so that we need to
replace them by passing `ec` instead of `th`.
* vm_core.h (GET_EC()): introduced to access current ec. Also
remove `ruby_current_thread` global variable.
* cont.c (rb_context_t): introduce rb_context_t::thread_ptr instead of
rb_context_t::thread_value.
* cont.c (ec_set_vm_stack): added to update vm_stack explicitly.
* cont.c (ec_switch): added to switch ec explicitly.
* cont.c (rb_fiber_close): added to terminate fibers explicitly.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@60440 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Jean Boussier
Nobuyoshi Nakada
Takashi Kokubun
Jean Boussier
Koichi Sasada
Yuta Saito
xtkoba
Samuel Williams
NARUSE, Yui
Peter Zhu
normal
ko1
k0kubun
nobu