like "error: static declaration of 'xxx' follows non-static declaration".
r64940 is successfully built on mswin but not built on almost all other environments.
internal.h: ditto
include/ruby/intern.h: MJIT_STATIC is moved to this file since this file
also needs to use this.
mjit.h: MJIT_STATIC is moved from this.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64941 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
because r64849 seems to fix issues which we were confused about.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64850 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This reverts commit r64829. I'll prepare another temporary fix, but I'll
separately commit that to make it easier to revert that later.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64838 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
not optimizing Array#& and Array#| because vm_insnhelper.c can't easily
inline it (large amount of array.c code would be needed in vm_insnhelper.c)
and the method body is a little complicated compared to Integer's ones.
So I thought only Integer#& and Integer#| have a significant impact,
and eliminating unnecessary branches would contribute to JIT's performance.
vm_insnhelper.c: ditto
tool/transform_mjit_header.rb: make sure these instructions are inlined
on JIT.
compile.c: compile vm_opt_and and vm_opt_or.
id.def: define id for them to be used in compile.c and vm*.c
vm.c: track redefinition of Integer#& and Integer#|
vm_core.h: allow detecting redefinition of & and |
test/ruby/test_jit.rb: test new insns
test/ruby/test_optimization.rb: ditto
* Optcarrot benchmark
This is a kind of experimental thing but I'm committing this since the
performance impact is significant especially on Optcarrot with JIT.
$ benchmark-driver benchmark.yml --rbenv 'before::before --disable-gems;before+JIT::before --disable-gems --jit;after::after --disable-gems;after+JIT::after --disable-gems --jit' -v --repeat-count 24
before: ruby 2.6.0dev (2018-09-24 trunk 64821) [x86_64-linux]
before+JIT: ruby 2.6.0dev (2018-09-24 trunk 64821) +JIT [x86_64-linux]
after: ruby 2.6.0dev (2018-09-24 opt_and 64821) [x86_64-linux]
last_commit=opt_or
after+JIT: ruby 2.6.0dev (2018-09-24 opt_and 64821) +JIT [x86_64-linux]
last_commit=opt_or
Calculating -------------------------------------
before before+JIT after after+JIT
Optcarrot Lan_Master.nes 51.460 66.315 53.023 71.173 fps
Comparison:
Optcarrot Lan_Master.nes
after+JIT: 71.2 fps
before+JIT: 66.3 fps - 1.07x slower
after: 53.0 fps - 1.34x slower
before: 51.5 fps - 1.38x slower
[close https://github.com/ruby/ruby/pull/1963]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64824 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This enhances rb_vm_insn_addr2insn which retrieves a decoded insn number
from encoded insn.
The insn data table include not only decoded insn number, but also its
len, trace and non-trace version of encoded insn.
This table can be used to simplify trace instrumentation.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64518 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Spurious interrupts from SIGCHLD cause Mutex#sleep (via
ConditionVariable#wait) to return early and breaks some use
cases. Since these are outside the programs's control with
MJIT, we will only consider pending interrupts (e.g. those
from Thread#run) and signals which cause a Ruby-level Signal.trap
handler to fire as "spurious" wakeups.
[ruby-core:88537] [Feature #15002]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64444 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
On a 64-bit system, this reduces rb_thread_t from 536 to 520 bytes.
Depending on the allocation, this can reduce cacheline access
for checking the abort_on_exception, report_on_exception and
pending_interrupt_queue_checked flags.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64376 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This reverts commit 194a6a2c68 (r64203).
Race conditions which caused the original reversion will be fixed
in the subsequent commit.
[ruby-core:88360] [Misc #14937]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64352 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This is just a refactoring.
The receiver of "invokesuper" was a boolean to represent if it is ZSUPER
or not. This was used in vm_search_super_method to prohibit ZSUPER call
in define_method. (It is currently prohibited because of the limitation
of the implementation.)
This change removes the hack by introducing an explicit flag,
VM_CALL_SUPER, to signal the information. Now, the implementation of
"invokesuper" is consistent with "send" instruction.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64268 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
By this commit's changes in other files, now MJIT started to work on VC++.
Unfortunately some features are still broken and they'll be fixed later.
This also suppresses cl.exe's default output to stdout because there
seems to be no option to do it. Tweaking some log messages as well.
vm_core.h: declare `__declspec(dllimport)` to export them correctly on mswin.
vm_insnhelper.h: ditto
mjit.h: ditto
test_jit.rb: skipped some pending tests.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64221 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
To reduce resource use and reduce CI failure; remove
timer-thread. Single-threaded Ruby processes (including forked
children) will never see extra thread overhead. This prevents
glibc and jemalloc from going into multi-threaded mode and
initializing locks or causing fragmentation via arena explosion.
The GVL is implements its own wait-queue as a ccan/list to
permit controlling wakeup order. Timeslice under contention is
handled by a designated timer thread (similar to choosing a
"patrol_thread" for current deadlock checking).
There is only one self-pipe, now, as wakeups for timeslice are
done independently using condition variables. This reduces FD
pressure slightly.
Signal handling is handled directly by a Ruby Thread (instead
of timer-thread) by exposing signal self-pipe to callers of
rb_thread_fd_select, native_sleep, rb_wait_for_single_fd, etc...
Acquiring, using, and releasing the self-pipe is exposed via 4
new internal functions:
1) rb_sigwait_fd_get - exclusively acquire timer_thread_pipe.normal[0]
2) rb_sigwait_fd_sleep - sleep and wait for signal (and no other FDs)
3) rb_sigwait_fd_put - release acquired result from rb_sigwait_fd_get
4) rb_sigwait_fd_migrate - migrate signal handling to another thread
after calling rb_sigwait_fd_put.
rb_sigwait_fd_migrate is necessary for waitpid callers because
only one thread can wait on self-pipe at a time, otherwise a
deadlock will occur if threads fight over the self-pipe.
TRAP_INTERRUPT_MASK is now set for the main thread directly in
signal handler via rb_thread_wakeup_timer_thread.
Originally, I wanted to use POSIX timers
(timer_create/timer_settime) for this. Unfortunately, this
proved unfeasible as Mutex#sleep resumes on spurious wakeups and
test/thread/test_cv.rb::test_condvar_timed_wait failed. Using
pthread_sigmask to mask out SIGVTALRM fixed that test, but
test/fiddle/test_function.rb::test_nogvl_poll proved there'd be
some unavoidable (and frequent) incompatibilities from that
approach.
Finally, this allows us to drop thread_destruct_lock and
interrupt current ec directly.
We don't need to rely on vm->thread_destruct_lock or a coherent
vm->running_thread on any platform. Separate timer-thread for
time slice and signal handling is relegated to thread_win32.c,
now.
[ruby-core:88088] [Misc #14937]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64107 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Otherwise, an altstack may live past ObjectSpace destruction
and xfree-ing the altstack will segfault.
[ruby-core:85621] [Feature #14487]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64102 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Repack rb_thread_struct, rb_execution_context_struct, args_info and
iseq_compile_data to save 1 word per struct.
re_pattern_buffer remains unpacked due to the possible binary
compatibility.
[Fix GH-1907]
Based on the patch
From: Lourens Naudé <lourens@bearmetal.eu>
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64096 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Revert r63968 and cast at caller side to prevent unintentional casting.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63972 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* variable.c (rb_const_search): call #const_missing method on
private constants, as well as uninitialized constants.
[Feature #14328]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63871 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Reading win32/win32.c waitpid implementation, maybe waitpid(-1, ...)
on that platform will never conflict with mjit use of waitpid.
In any case, I've added WAITPID_USE_SIGCHLD macro to vm_core.h
so it can be easy for Linux/BSD users to test (hopefully!)
win32-compatible code.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63855 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The change is unstable on Windows. Please re-commit it when it correctly
supports Windows.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63852 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Some systems lack SIGCHLD or have incomplete SIGCHLD
implementations. So enable polling mode for them.
[ruby-core:87705] [Bug #14867]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63795 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Use a global SIGCHLD handler to guard all callers of rb_waitpid.
To work safely with multi-threaded programs, we introduce a
VM-wide waitpid_lock to be acquired BEFORE fork/vfork spawns the
process. This is to be combined with the new ruby_waitpid_locked
function used by mjit.c in a non-Ruby thread.
Ruby-level SIGCHLD handlers registered with Signal.trap(:CHLD)
continues to work as before and there should be no regressions
in any existing use cases.
Splitting the wait queues for PID > 0 and groups (PID <= 0)
ensures we favor PID > 0 callers.
The disabling of SIGCHLD in rb_f_system is longer necessary,
as we use deferred signal handling and no longer make ANY
blocking waitpid syscalls in other threads which could "beat"
the waitpid call made by rb_f_system.
We prevent SIGCHLD from firing in normal Ruby Threads and only
enable it in the timer-thread, to prevent spurious wakeups
from in test/-ext-/gvl/test_last_thread.rb with MJIT enabled.
I've tried to guard as much of the code for RUBY_SIGCHLD==0
using C "if" statements rather than CPP "#if" so to reduce
the likelyhood of portability problems as the compiler will
see more code.
We also work to suppress false-positives from
Process.wait(-1, Process::WNOHANG) to quiets warnings from
spec/ruby/core/process/wait2_spec.rb with MJIT enabled.
Lastly, we must implement rb_grantpt for ext/pty. We need a
MJIT-compatible way of supporting grantpt(3) which may spawn
the `pt_chown' binary and call waitpid(2) on it.
[ruby-core:87605] [Ruby trunk Bug#14867]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63758 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
vm->sleeper is never modified in signal handlers or without GVL,
so there's no need for volatile hocus-pocus.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63713 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The current VM_INSTRUCTION_SIZE is 198, so the linear search
painful during a major GC phase.
I noticed rb_vm_insn_addr2insn2 showing up at the top of some
profiles while working on some malloc-related stuff, so I
decided to attack it.
Most notably, the benchmark/bm_vm3_gc.rb improves by over 40%:
https://80x24.org/spew/20180602220554.GA9991@whir/raw
[ruby-core:87361] [Feature #14814]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63594 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (VM_ENV_DATA_INDEX_ENV_PROC): ep[VM_ENV_DATA_INDEX_ENV_PROC] is
allocated to mark a Proc which is created from iseq block.
However, `lep[0]` keeps Proc object itself as a block handler (Proc).
So we don't need to keep it.
* vm_core.h (VM_ENV_PROCVAL): ditto.
* vm.c (vm_make_env_each): do not need to keep blockprocval as special value.
* vm.c (vm_block_handler_escape): simply return Proc value.
* proc.c (proc_new): we don't need to check Env because a Proc type block
handler is a Proc object itself.
[Bug #14782]
* test/ruby/test_proc.rb: add a test for [Bug #14782]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63494 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
st_table allows the use of st_shift to act as an order-preserving
queue while allowing fast lookups to prevent duplicate jobs.
In typical Ruby apps, this table will only have one entry
for gc_finalize_deferred_register.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63451 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
rb_atomic_t is 32-bit on 64-bit platforms (including the popular
x86-64 Linux), so save 4 bytes on this structure. This doesn't
result in any final size reduction due to padding, yet, but
future changes are possible to shrink rb_execution_context_t
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63435 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This ec->machine.regs is marked by GC. However jmp_buf is
not defined by us. There are chances of unaligned access.
We should force it VALUE-aligned.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63375 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Don't abuse struct RString to hold arbitrary memory region.
Raw pointer should just suffice.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63368 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Instead of allocating and registering the altstack in different
places, do it together to reduce code and improve readability.
When thread cache is enabled, storing altstack in rb_thread_t
is wasteful and we may reuse altstack in the same pthread.
This also lets us clearly allow use of xmalloc to allow GC to
recover from ENOMEM.
[ruby-core:85621] [Feature #14487]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63213 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This is fairly non-intrusive bugfix to prevent children
from trying to reach into thread stacks of the parent.
I will probably reuse this idea and redo r62934, too
(same bug).
* vm_core.h (typedef struct rb_vm_struct): add fork_gen counter
* thread.c (rb_thread_atfork_internal): increment fork_gen
* variable.c (struct autoload_data_i): store fork_gen
* variable.c (check_autoload_data): remove (replaced with get_...)
* variable.c (get_autoload_data): check fork_gen when retrieving
* variable.c (check_autoload_required): use get_autoload_data
* variable.c (rb_autoloading_value): ditto
* variable.c (rb_autoload_p): ditto
* variable.c (current_autoload_data): ditto
* variable.c (autoload_reset): reset fork_gen, adjust indent
* variable.c (rb_autoload_load): set fork_gen when setting state
* test/ruby/test_autoload.rb (test_autoload_fork): new test
[ruby-core:86410] [Bug #14634]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@63210 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We need to mark default values for kwarg methods. This also fixes
Bootsnap. IBF iseq loading needed to mark iseqs as "having markable
objects".
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62851 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Directly marking iseq operands allows us to eliminate the "mark array"
stored on ISEQ objects, which will reduce the amount of memory ISEQ
objects consume. This patch changes the iseq mark function to:
* Directly marks ISEQ operands
* Iterate over and mark child ISEQs
It also introduces two flags on the ISEQ object. In order to mark
instruction operands, we have to disassemble the instructions and find
the instruction parameters and types. Instructions may also be
translated to jump addresses. Instruction sequences may get marked by
the GC *while* they're mid flight (being compiled). The
`ISEQ_TRANSLATED` flag is used to indicate whether or not the
instructions have been translated to jump addresses so that when we
decode the instructions we know whether or not we need to go from jump
location back to original instruction or not.
Not all ISEQ objects have any markable objects embedded in their
instructions. We can detect whether or not an ISEQ has markable objects
in the instructions at compile time. If the instructions contain
markable objects, we set a flag `ISEQ_MARKABLE_ISEQ` on the ISEQ object.
This means that during the mark phase, we can skip decompilation if the
flag is *not* set. In other words, we can avoid decompilation of we
know in advance there is nothing to mark.
`once` instructions have an operand that contains the result of a
one-time compilation of a regex. Before this patch, that operand was
called an "inline cache", even though the struct was actually an "inline
storage". This patch changes the operand to be an "inline storage" so
that we can differentiate between caches that need marking (the inline
storage) and caches that don't need marking (inline cache).
[ruby-core:84909]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62706 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
to be used for MJIT's optimization. It's not used for optimization
in this commit yet.
vm_core.h: added catch_except_p field.
iseq.c: show the flag in ISeq disasm for debugging.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62654 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_insnhelper.c (vm_get_ev_const): add flag argument of
`rb_autoloading_value`.
* constant.h (rb_autoloading_value): moved the declaration from
vm_core.h for `rb_const_flag_t`. [ruby-core:85516] [Bug #14469]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62394 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
No implicit cast is defined between these types. Should be explicit.
Also, NULL is defined to be ((void*)0) so not usable as a function
pointer value.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62221 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
which has been developed by Takashi Kokubun <takashikkbn@gmail> as
YARV-MJIT. Many of its bugs are fixed by wanabe <s.wanabe@gmail.com>.
This JIT compiler is designed to be a safe migration path to introduce
JIT compiler to MRI. So this commit does not include any bytecode
changes or dynamic instruction modifications, which are done in original
MJIT.
This commit even strips off some aggressive optimizations from
YARV-MJIT, and thus it's slower than YARV-MJIT too. But it's still
fairly faster than Ruby 2.5 in some benchmarks (attached below).
Note that this JIT compiler passes `make test`, `make test-all`, `make
test-spec` without JIT, and even with JIT. Not only it's perfectly safe
with JIT disabled because it does not replace VM instructions unlike
MJIT, but also with JIT enabled it stably runs Ruby applications
including Rails applications.
I'm expecting this version as just "initial" JIT compiler. I have many
optimization ideas which are skipped for initial merging, and you may
easily replace this JIT compiler with a faster one by just replacing
mjit_compile.c. `mjit_compile` interface is designed for the purpose.
common.mk: update dependencies for mjit_compile.c.
internal.h: declare `rb_vm_insn_addr2insn` for MJIT.
vm.c: exclude some definitions if `-DMJIT_HEADER` is provided to
compiler. This avoids to include some functions which take a long time
to compile, e.g. vm_exec_core. Some of the purpose is achieved in
transform_mjit_header.rb (see `IGNORED_FUNCTIONS`) but others are
manually resolved for now. Load mjit_helper.h for MJIT header.
mjit_helper.h: New. This is a file used only by JIT-ed code. I'll
refactor `mjit_call_cfunc` later.
vm_eval.c: add some #ifdef switches to skip compiling some functions
like Init_vm_eval.
win32/mkexports.rb: export thread/ec functions, which are used by MJIT.
include/ruby/defines.h: add MJIT_FUNC_EXPORTED macro alis to clarify
that a function is exported only for MJIT.
array.c: export a function used by MJIT.
bignum.c: ditto.
class.c: ditto.
compile.c: ditto.
error.c: ditto.
gc.c: ditto.
hash.c: ditto.
iseq.c: ditto.
numeric.c: ditto.
object.c: ditto.
proc.c: ditto.
re.c: ditto.
st.c: ditto.
string.c: ditto.
thread.c: ditto.
variable.c: ditto.
vm_backtrace.c: ditto.
vm_insnhelper.c: ditto.
vm_method.c: ditto.
I would like to improve maintainability of function exports, but I
believe this way is acceptable as initial merging if we clarify the
new exports are for MJIT (so that we can use them as TODO list to fix)
and add unit tests to detect unresolved symbols.
I'll add unit tests of JIT compilations in succeeding commits.
Author: Takashi Kokubun <takashikkbn@gmail.com>
Contributor: wanabe <s.wanabe@gmail.com>
Part of [Feature #14235]
---
* Known issues
* Code generated by gcc is faster than clang. The benchmark may be worse
in macOS. Following benchmark result is provided by gcc w/ Linux.
* Performance is decreased when Google Chrome is running
* JIT can work on MinGW, but it doesn't improve performance at least
in short running benchmark.
* Currently it doesn't perform well with Rails. We'll try to fix this
before release.
---
* Benchmark reslts
Benchmarked with:
Intel 4.0GHz i7-4790K with 16GB memory under x86-64 Ubuntu 8 Cores
- 2.0.0-p0: Ruby 2.0.0-p0
- r62186: Ruby trunk (early 2.6.0), before MJIT changes
- JIT off: On this commit, but without `--jit` option
- JIT on: On this commit, and with `--jit` option
** Optcarrot fps
Benchmark: https://github.com/mame/optcarrot
| |2.0.0-p0 |r62186 |JIT off |JIT on |
|:--------|:--------|:--------|:--------|:--------|
|fps |37.32 |51.46 |51.31 |58.88 |
|vs 2.0.0 |1.00x |1.38x |1.37x |1.58x |
** MJIT benchmarks
Benchmark: https://github.com/benchmark-driver/mjit-benchmarks
(Original: https://github.com/vnmakarov/ruby/tree/rtl_mjit_branch/MJIT-benchmarks)
| |2.0.0-p0 |r62186 |JIT off |JIT on |
|:----------|:--------|:--------|:--------|:--------|
|aread |1.00 |1.09 |1.07 |2.19 |
|aref |1.00 |1.13 |1.11 |2.22 |
|aset |1.00 |1.50 |1.45 |2.64 |
|awrite |1.00 |1.17 |1.13 |2.20 |
|call |1.00 |1.29 |1.26 |2.02 |
|const2 |1.00 |1.10 |1.10 |2.19 |
|const |1.00 |1.11 |1.10 |2.19 |
|fannk |1.00 |1.04 |1.02 |1.00 |
|fib |1.00 |1.32 |1.31 |1.84 |
|ivread |1.00 |1.13 |1.12 |2.43 |
|ivwrite |1.00 |1.23 |1.21 |2.40 |
|mandelbrot |1.00 |1.13 |1.16 |1.28 |
|meteor |1.00 |2.97 |2.92 |3.17 |
|nbody |1.00 |1.17 |1.15 |1.49 |
|nest-ntimes|1.00 |1.22 |1.20 |1.39 |
|nest-while |1.00 |1.10 |1.10 |1.37 |
|norm |1.00 |1.18 |1.16 |1.24 |
|nsvb |1.00 |1.16 |1.16 |1.17 |
|red-black |1.00 |1.02 |0.99 |1.12 |
|sieve |1.00 |1.30 |1.28 |1.62 |
|trees |1.00 |1.14 |1.13 |1.19 |
|while |1.00 |1.12 |1.11 |2.41 |
** Discourse's script/bench.rb
Benchmark: https://github.com/discourse/discourse/blob/v1.8.7/script/bench.rb
NOTE: Rails performance was somehow a little degraded with JIT for now.
We should fix this.
(At least I know opt_aref is performing badly in JIT and I have an idea
to fix it. Please wait for the fix.)
*** JIT off
Your Results: (note for timings- percentile is first, duration is second in millisecs)
categories_admin:
50: 17
75: 18
90: 22
99: 29
home_admin:
50: 21
75: 21
90: 27
99: 40
topic_admin:
50: 17
75: 18
90: 22
99: 32
categories:
50: 35
75: 41
90: 43
99: 77
home:
50: 39
75: 46
90: 49
99: 95
topic:
50: 46
75: 52
90: 56
99: 101
*** JIT on
Your Results: (note for timings- percentile is first, duration is second in millisecs)
categories_admin:
50: 19
75: 21
90: 25
99: 33
home_admin:
50: 24
75: 26
90: 30
99: 35
topic_admin:
50: 19
75: 20
90: 25
99: 30
categories:
50: 40
75: 44
90: 48
99: 76
home:
50: 42
75: 48
90: 51
99: 89
topic:
50: 49
75: 55
90: 58
99: 99
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62197 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
that allows to JIT-compile Ruby methods by generating C code and
using C compiler. See the first comment of mjit.c to know what this
file does.
mjit.c is authored by Vladimir Makarov <vmakarov@redhat.com>.
After he invented great method JIT infrastructure for MRI as MJIT,
Lars Kanis <lars@greiz-reinsdorf.de> sent the patch to support MinGW
in MJIT. In addition to merging it, I ported pthread to Windows native
threads. Now this MJIT infrastructure can be compiled on Visual Studio.
This commit simplifies mjit.c to decrease code at initial merge. For
example, this commit does not provide multiple JIT threads support.
We can resurrect them later if we really want them, but I wanted to minimize
diff to make it easier to review this patch.
`/tmp/_mjitXXX` file is renamed to `/tmp/_ruby_mjitXXX` because non-Ruby
developers may not know the name "mjit" and the file name should make
sure it's from Ruby and not from some harmful programs. TODO: it may be
better to store this to some temporary directory which Ruby is already using
by Tempfile, if it's not bad for performance.
mjit.h: New. It has `mjit_exec` interface similar to `vm_exec`, which is
for triggering MJIT. This drops interface for AOT compared to the original
MJIT.
Makefile.in: define macros to let MJIT know the path of MJIT header.
Probably we can refactor this to reduce the number of macros (TODO).
win32/Makefile.sub: ditto.
common.mk: compile mjit.o and mjit_compile.o. Unlike original MJIT, this
commit separates MJIT infrastructure and JIT compiler code as independent
object files. As initial patch is NOT going to have ultra-fast JIT compiler,
it's likely to replace JIT compiler, e.g. original MJIT's compiler or some
future JIT impelementations which are not public now.
inits.c: define MJIT module. This is added because `MJIT.enabled?` was
necessary for testing.
test/lib/zombie_hunter.rb: skip if `MJIT.enabled?`. Obviously this
wouldn't work with current code when JIT is enabled.
test/ruby/test_io.rb: skip this too. This would make no sense with MJIT.
ruby.c: define MJIT CLI options. As major difference from original MJIT,
"-j:l"/"--jit:llvm" are renamed to "--jit-cc" because I want to support
not only gcc/clang but also cl.exe (Visual Studio) in the future. But it
takes only "--jit-cc=gcc", "--jit-cc=clang" for now. And only long "--jit"
options are allowed since some Ruby committers preferred it at Ruby
developers Meeting on January, and some of options are renamed.
This file also triggers to initialize MJIT thread and variables.
eval.c: finalize MJIT worker thread and variables.
test/ruby/test_rubyoptions.rb: fix number of CLI options for --jit.
thread_pthread.c: change for pthread abstraction in MJIT. Prefix rb_ for
functions which are used by other files.
thread_win32.c: ditto, for Windows. Those pthread porting is one of major
works that YARV-MJIT created, which is my fork of MJIT, in Feature 14235.
thread.c: follow rb_ prefix changes
vm.c: trigger MJIT call on VM invocation. Also trigger `mjit_mark` to avoid
SEGV by race between JIT and GC of ISeq. The improvement was provided by
wanabe <s.wanabe@gmail.com>.
In JIT compiler I created and am going to add in my next commit, I found
that having `mjit_exec` after `vm_loop_start:` is harmful because the
JIT-ed function doesn't proceed other ISeqs on RESTORE_REGS of leave insn.
Executing non-FINISH frame is unexpected for my JIT compiler and
`exception_handler` triggers executions of such ISeqs. So `mjit_exec`
here should be executed only when it directly comes from `vm_exec` call.
`RubyVM::MJIT` module and `.enabled?` method is added so that we can skip
some tests which don't expect JIT threads or compiler file descriptors.
vm_insnhelper.h: trigger MJIT on method calls during VM execution.
vm_core.h: add fields required for mjit.c. `bp` must be `cfp[6]` because
rb_control_frame_struct is likely to be casted to another struct. The
last position is the safest place to add the new field.
vm_insnhelper.c: save initial value of cfp->ep as cfp->bp. This is an
optimization which are done in both MJIT and YARV-MJIT. So this change
is added in this commit. Calculating bp from ep is a little heavy work,
so bp is kind of cache for it.
iseq.c: notify ISeq GC to MJIT. We should know which iseq in MJIT queue
is GCed to avoid SEGV. TODO: unload some GCed units in some safe way.
gc.c: add hooks so that MJIT can wait GC, and vice versa. Simultaneous
JIT and GC executions may cause SEGV and so we should synchronize them.
cont.c: save continuation information in MJIT worker. As MJIT shouldn't
unload JIT-ed code which is being used, MJIT wants to know full list of
saved execution contexts for continuation and detect ISeqs in use.
mjit_compile.c: added empty JIT compiler so that you can reuse this commit
to build your own JIT compiler. This commit tries to compile ISeqs but
all of them are considered as not supported in this commit. So you can't
use JIT compiler in this commit yet while we added --jit option now.
Patch author: Vladimir Makarov <vmakarov@redhat.com>.
Contributors:
Takashi Kokubun <takashikkbn@gmail.com>.
wanabe <s.wanabe@gmail.com>.
Lars Kanis <lars@greiz-reinsdorf.de>.
Part of Feature 12589 and 14235.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62189 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We treat this as "int" through the vm_living_thread_num API
anyways, and "pid_t" is still 32-bits with glibc on 64-bit
platforms. I expect it'll be a long time before anybody needs
more than 2 billion native threads. For now, let's save one
cacheline on x86-64 (as reported by pahole(1)):
before: size: 1288, cachelines: 21, members: 45
after: size: 1280, cachelines: 20, members: 45
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@62075 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (VM_INSN_INFO_TABLE_IMPL): use 1 (binary search)
because 2 (succinct bitvector) doesn't work on Rasbian (x86_64).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@61748 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
mame
k0kubun
kazu
normal
nobu
ktsj
naruse
ko1
yui-knk
shyouhei
tenderlove