Setting this to true disables the deadlock detector. It should
only be used in cases where the deadlock could be broken via some
external means, such as via a signal.
Now that $SAFE is no longer used, replace the safe_level_ VM flag
with ignore_deadlock for storing the setting.
Fixes [Bug #13768]
* scheduler.unblock was already already called before but with no corresponding scheduler.block
* add test that Queue#pop makes the scheduler wait until it gets an element.
* Enables Mutex to be used as synchronization between multiple Fibers
of the same Thread.
* With a Fiber scheduler we can yield to another Fiber on contended
Mutex#lock instead of blocking the entire thread.
* This also makes the behavior of Mutex consistent across CRuby, JRuby and TruffleRuby.
* [Feature #16792]
This commit introduces Ractor mechanism to run Ruby program in
parallel. See doc/ractor.md for more details about Ractor.
See ticket [Feature #17100] to see the implementation details
and discussions.
[Feature #17100]
This commit does not complete the implementation. You can find
many bugs on using Ractor. Also the specification will be changed
so that this feature is experimental. You will see a warning when
you make the first Ractor with `Ractor.new`.
I hope this feature can help programmers from thread-safety issues.
Not every compilers understand that rb_raise does not return. When a
function does not end with a return statement, such compilers can issue
warnings. We would better tell them about reachabilities.
Formerly, branch coverage measurement counters are generated for each
compilation traverse of the AST. However, ensure clause node is
traversed twice; one is for normal-exit case (the resulted bytecode is
embedded in its outer scope), and the other is for exceptional case (the
resulted bytecode is used in catch table). Two branch coverage counters
are generated for the two cases, but it is not desired.
This changeset revamps the internal representation of branch coverage
measurement. Branch coverage counters are generated only at the first
visit of a branch node. Visiting the same node reuses the
already-generated counter, so double counting is avoided.
Don't use rb_check_id, which only works for pinned symbols.
Switch inadvertent creation test for thread_variable? to
only check for pinned symbols, same as thread_variable_get
and thread_variable_set.
Make key variable name in thread_local_set match
thread_local_get and thread_variable?.
Fixes [Bug #16906]
rb_uninterruptible() disables any interrupts using handle_interrupt
feature (This function is used by `p`).
After this function, pending interrupts should be checked correctly,
however there is no chance to setup interrupt flag of working
threads, it means that nobody checks pending interrupts.
For example, it ignores terminate signal delivered at the end
of main thread and program can't stop.
This patch set interrupt flag if there are pending interrupts.
This removes the warnings added in 2.7, and changes the behavior
so that a final positional hash is not treated as keywords or
vice-versa.
To handle the arg_setup_block splat case correctly with keyword
arguments, we need to check if we are taking a keyword hash.
That case didn't have a test, but it affects real-world code,
so add a test for it.
This removes rb_empty_keyword_given_p() and related code, as
that is not needed in Ruby 3. The empty keyword case is the
same as the no keyword case in Ruby 3.
This changes rb_scan_args to implement keyword argument
separation for C functions when the : character is used.
For backwards compatibility, it returns a duped hash.
This is a bad idea for performance, but not duping the hash
breaks at least Enumerator::ArithmeticSequence#inspect.
Instead of having RB_PASS_CALLED_KEYWORDS be a number,
simplify the code by just making it be rb_keyword_given_p().
Saves comitters' daily life by avoid #include-ing everything from
internal.h to make each file do so instead. This would significantly
speed up incremental builds.
We take the following inclusion order in this changeset:
1. "ruby/config.h", where _GNU_SOURCE is defined (must be the very
first thing among everything).
2. RUBY_EXTCONF_H if any.
3. Standard C headers, sorted alphabetically.
4. Other system headers, maybe guarded by #ifdef
5. Everything else, sorted alphabetically.
Exceptions are those win32-related headers, which tend not be self-
containing (headers have inclusion order dependencies).
These headers need no rewrite. Just add some minor tweaks, like
addition of #include lines. Mainly cosmetic.
TIMET_MAX_PLUS_ONE was deleted because the macro was used from only
one place (directly write expression there).
This removes the related tests, and puts the related specs behind
version guards. This affects all code in lib, including some
libraries that may want to support older versions of Ruby.
This removes the security features added by $SAFE = 1, and warns for access
or modification of $SAFE from Ruby-level, as well as warning when calling
all public C functions related to $SAFE.
This modifies some internal functions that took a safe level argument
to no longer take the argument.
rb_require_safe now warns, rb_require_string has been added as a
version that takes a VALUE and does not warn.
One public C function that still takes a safe level argument and that
this doesn't warn for is rb_eval_cmd. We may want to consider
adding an alternative method that does not take a safe level argument,
and warn for rb_eval_cmd.
We track recursion in order to not infinite loop in ==, inspect, and
similar methods by keeping a thread-local 1 or 2 level hash. This allows
us to track when we have seen the same object (ex. using inspect) or
same pair of objects (ex. using ==) in this stack before and to treat
that differently.
Previously both levels of this Hash used the object's memory_id as a key
(using object_id would be slow and wasteful). Unfortunately, prettyprint
(pp.rb) uses this thread local variable to "pretend" to be inspect and
inherit its same recursion behaviour.
This commit changes the top-level hash to be an identity hash and to use
objects as keys instead of their object_ids.
I'd like to have also converted the 2nd level hash to an ident hash, but
it would have prevented an optimization which avoids allocating a 2nd
level hash for only a single element, which we want to keep because it's
by far the most common case.
So the new format of this hash is:
{ object => true } (not paired)
{ lhs_object => rhs_object_memory_id } (paired, single object)
{ lhs_object => { rhs_object_memory_id => true, ... } } (paired, many objects)
We must also update pp.rb to match this (using identity hashes).
This changeset basically replaces `ruby_xmalloc(x * y)` into
`ruby_xmalloc2(x, y)`. Some convenient functions are also
provided for instance `rb_xmalloc_mul_add(x, y, z)` which allocates
x * y + z byes.
It is not safe to set this in C functions that can be called from
other C functions, as in the non argument-delegation case, you
can end up calling a Ruby method with a flag indicating keywords
are set without passing keywords.
Introduce some new *_kw functions that take a kw_splat flag and
use these functions to set RB_PASS_CALLED_KEYWORDS in places where
we know we are delegating methods (e.g. Class#new, Method#call)
The kw_splat flag is whether the original call passes keyword or not.
Some types of methods (e.g., bmethod and sym_proc) drops the
information. This change tries to propagate the flag to the final
callee, as far as I can.
After 5e86b005c0, I now think ANYARGS is
dangerous and should be extinct. This function has only one call site
so adding appropriate prototype is trivial.
After 5e86b005c0, I now think ANYARGS is
dangerous and should be extinct. This commit deletes ANYARGS from
rb_thread_create, which seems very safe to do.
debug utility macro rp() (rp_m()) and bp() are introduced.
* rp(obj) shows obj information w/o any side-effect to STDERR.
* rp_m(m, obj) is similar to rp(obj), but show m before.
* bp() is alias of ruby_debug_breakpoint(), which is registered
as a breakpoint in run.gdb (used by `make gdb` or make gdb-ruby`).
`(unsigned int)(THREAD_SHIELD_WAITING_MASK>>THREAD_SHIELD_WAITING_SHIFT)`
is 0xffffffff, and w > 0xffffffff is always true.
Coverity Scan pointed out this issue.
During fork, it's possible that threads with root fibers are terminated,
but fiber state is not updated. `fiber_verify` will subsequently fail. We
forcefully enter the FIBER_TERMINATED state when terminating the root
fiber.
If `vm_stack` is left dangling in a forked process, the gc attempts to scan
it, but it is invalid and will cause a segfault. Therefore, we clear it
before forking.
In order to simplify this, `rb_ec_clear_vm_stack` was introduced.
Similar to NameError#receiver, this returns the object on which
the modification was attempted. This is useful as it can pinpoint
exactly what is frozen. In many cases when a FrozenError is
raised, you cannot determine from the context which object is
frozen that you attempted to modify.
Users of the current rb_error_frozen C function will have to switch
to using rb_error_frozen_object or the new rb_frozen_error_raise
in order to set the receiver of the FrozenError.
To allow the receiver to be set from Ruby, support an optional
second argument to FrozenError#initialize.
Implements [Feature #15751]
For some reason symbols (or classes) are being overridden in trunk
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67598 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This commit adds the new method `GC.compact` and compacting GC support.
Please see this issue for caveats:
https://bugs.ruby-lang.org/issues/15626
[Feature #15626]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@67576 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
zlib and bignum both contain unblocking functions which are
async-signal-safe and do not require spawning additional
threads.
We can execute those functions directly in signal handlers
without incurring overhead of extra threads, so provide C-API
users the ability to deal with that. Other C-API users may
have similar need.
This flexible API can supercede existing uses of
rb_thread_call_without_gvl and rb_thread_call_without_gvl2 by
introducing a flags argument to control behavior.
Note: this API is NOT finalized. It needs approval from other
committers. I prefer shorter name than previous
rb_thread_call_without_gvl* functions because my eyes requires
big fonts.
[Bug #15499]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66712 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We need another native thread to call some unblocking functions
which aren't RUBY_UBF_IO or RUBY_UBF_PROCESS. Instead of a
permanent thread in <= 2.5, we can now rely on the thread cache
feature to perform interrupts.
[ruby-core:90865] [Bug #15499]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66708 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The true bug fork_gen was hiding was rb_mutex_abandon_locking_mutex
failing to unconditionally clear the waitq of mutexes it was
waiting on. So we fix rb_mutex_abandon_locking_mutex, instead,
and eliminate rb_mutex_cleanup_keeping_mutexes.
This commit was tested heavily on a single-core Pentium-M which
was my most reliable reproducer of the "crash.rb" script from
[Bug #15383]
[Bug #14578] [Bug #15383]
Note: [Bug #15430] turned out to be an entirely different
problem: RLIMIT_NPROC limit was hit on the CI VMs.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66489 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Especially over checking argc then calling rb_scan_args just to
raise an ArgumentError.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66238 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
postponed_job is safe to use in signal handlers, but is not
thread-safe for MJIT. Implement a workqueue for MJIT
thread-safety.
[Bug #15316]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66100 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_trace.c (rb_tracepoint_enable_for_target): support targetting
TracePoint. [Feature #15289]
Tragetting TracePoint is only enabled on specified method, proc
and so on, example: `tp.enable(target: code)`.
`code` should be consisted of InstructionSeuqnece (iseq)
(RubyVM::InstructionSeuqnece.of(code) should not return nil)
If code is a tree of iseq, TracePoint is enabled on all of
iseqs in a tree.
Enabled tragetting TracePoints can not enabled again with
and without target.
* vm_core.h (rb_iseq_t): introduce `rb_iseq_t::local_hooks`
to store local hooks.
`rb_iseq_t::aux::trace_events` is renamed to
`global_trace_events` to contrast with `local_hooks`.
* vm_core.h (rb_hook_list_t): add `rb_hook_list_t::running`
to represent how many Threads/Fibers are used this list.
If this field is 0, nobody using this hooks and we can
delete it.
This is why we can remove code from cont.c.
* vm_core.h (rb_vm_t): because of above change, we can eliminate
`rb_vm_t::trace_running` field.
Also renamed from `rb_vm_t::event_hooks` to `global_hooks`.
* vm_core.h, vm.c (ruby_vm_event_enabled_global_flags): renamed
from `ruby_vm_event_enabled_flags.
* vm_core.h, vm.c (ruby_vm_event_local_num): added to count
enabled targetting TracePoints.
* vm_core.h, vm_trace.c (rb_exec_event_hooks): accepts
hook list.
* vm_core.h (rb_vm_global_hooks): added for convinience.
* method.h (rb_method_bmethod_t): added to maintain Proc
and `rb_hook_list_t` for bmethod (defined by define_method).
* prelude.rb (TracePoint#enable): extracet a keyword parameter
(because it is easy than writing in C).
It calls `TracePoint#__enable` internal method written in C.
* vm_insnhelper.c (vm_trace): check also iseq->local_hooks.
* vm.c (invoke_bmethod): check def->body.bmethod.hooks.
* vm.c (hook_before_rewind): check iseq->local_hooks
and def->body.bmethod.hooks before rewind by exception.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@66003 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
RUBY_VM_CHECK_INTS_BLOCKING may switch threads and cause `fd'
to be closed. So we must ensure we register the waiting_fd
before checking for interrupts.
This only affects the ppoll/poll-using implementation of
rb_wait_for_single_fd, as the select-based implementation
already register waiting_fd before checking for interrupts.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65940 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
All normal Ruby IO methods (IO#read, IO#gets, IO#write, ...) are
all capable of appearing to be "blocking" when presented with a
file description with the O_NONBLOCK flag set; so there is
little risk of incompatibility within Ruby-using programs.
The biggest compatibility risk is when spawning external
programs. As a result, stdin, stdout, and stderr are now always
made blocking before exec-family calls.
This change will make an event-oriented MJIT usable if it is
waiting on pipes on POSIX_like platforms.
It is ALSO necessary to take advantage of (proposed lightweight
concurrency (aka "auto-Fiber") or any similar proposal for
network concurrency: https://bugs.ruby-lang.org/issues/13618
Named-pipe (FIFO) are NOT yet non-blocking by default since
they are rarely-used and may introduce compatibility problems
and extra syscall overhead for a common path.
Please revert this commit if there are problems and if I am afk
since I am afk a lot, lately.
[ruby-core:89950] [Bug #14968]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65922 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
by launching MJIT worker thread in child Ruby process.
See the comment before `mjit_child_after_fork` for details.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65785 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
select() is a crap API for even sleeping on sigwait_fd, so favor
the native_sleep-based functions when there are no FDs, instead.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65718 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* vm_core.h (rb_thread_struct): introduce new fields `invoke_type`
and `invoke_arg`.
There are two types threads: invoking proc (normal Ruby thread
created by `Thread.new do ... end`) and invoking func, created
by C-API. `invoke_type` shows the types.
* thread.c (thread_do_start): copy `invoke_arg.proc.args` contents
from Array to ALLOCA stack memory if args length is enough small (<8).
We don't need to keep Array and don't need to cancel using transient heap.
* vm.c (thread_mark): For func invoking threads, they can pass (void *)
parameter (rb_thread_t::invoke_arg::func::arg). However, a rubyspec test
(thread_spec.c) passes an Array object and it expect to mark it.
Clealy it is out of scope (misuse of `rb_thread_create` C-API). However,
I'm not sure someone else has such kind of misunderstanding.
So now we mark conservatively this (void *) arg with rb_gc_mark_maybe.
This misuse is found by this error log.
http://ci.rvm.jp/results/trunk-theap-asserts@silicon-docker/1448164
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65622 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
It may cause an access to uninitialized variables.
The call to ppoll will set the `revents` field, but ppoll is not always
called because it is in the guard `!RUBY_VM_INTERRUPTED(th->ec)`.
This issue was found by Coverity Scan.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65584 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
poll(2) and ppoll(2) implementations need to check and write to
.revents on the initial scan, anyways. So any poll/ppoll call
which returns a positive result can be expected to have an
initialized .revents value.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65553 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* hash.c, internal.h: support theap for small Hash.
Introduce RHASH_ARRAY (li_table) besides st_table and small Hash
(<=8 entries) are managed by an array data structure.
This array data can be managed by theap.
If st_table is needed, then converting array data to st_table data.
For st_table using code, we prepare "stlike" APIs which accepts hash value
and are very similar to st_ APIs.
This work is based on the GSoC achievement
by tacinight <tacingiht@gmail.com> and refined by ko1.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65454 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The instructions were used only for branch coverage.
Instead, it now uses a trace framework [Feature #14104].
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65225 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
* configure.ac: introduce new configure option `--enable-mjit` and
`--disable-mjit`. Default is "enable".
`--disable-mjit` disables all of MJIT features so that `ruby --jit`
can't enable MJIT.
This option affect a macro `USE_MJIT`.
This change remove `--enable/disable-install-mjit-header` option.
* Makefile.in: introduce the `ENABLE_MJIT` variable.
* common.mk: use `ENABLE_MJIT` option.
* internal.h: respect `USE_MJIT`. Same as other *.c, *.h.
* test/ruby/test_jit.rb: check `ENABLE_MJIT` key of rbconfg.rb.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65204 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This patch introduces "oneshot_lines" mode for `Coverage.start`, which
checks "whether each line was executed at least once or not", instead of
"how many times each line was executed". A hook for each line is fired
at most once, and after it is fired, the hook flag was removed; it runs
with zero overhead.
See [Feature #15022] in detail.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@65195 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
See also ISO9899:1999 section 7.8.1 paragraph 3.
The #ifndef is for C compilers older than C99.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64740 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
../thread.c:1219:18: warning: format specifies type 'unsigned long' but the argument has type 'rb_hrtime_t'
(aka 'unsigned long long') [-Wformat]
end, now);
^~~
../thread.c:1219:23: warning: format specifies type 'unsigned long' but the argument has type 'rb_hrtime_t'
(aka 'unsigned long long') [-Wformat]
end, now);
^~~
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64712 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Another thread may be holding th->interrupt_lock while our
current thread calls fork. Therefore we must reinitialize our
own th->interrupt_lock in the child process because the owner
of the lock is only in the parent. The original parent process
is unaffected. We cannot destroy the lock while it has an unknown
state, either, so some implementations can leak a small amount
of memory, here (NPTL won't).
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64707 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Otherwise, th->root_fiber can point to an invalid Fiber,
because Fibers do not live across fork. So consider
whatever Fiber is running the root fiber.
[ruby-core:88723] [Bug #15041]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64589 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Introduce a new rb_thread_sleep_interruptible that does not
execute interrupts before sleeping. Skipping the interrupt
check before sleep is required for out-of-GVL ruby_waitpid_all
to function properly when setting waitpid_state.ret
Now that ubf_select can be called by the gvl.timer thread
without recursive locking gvl.lock, we can safely use
rb_threadptr_interrupt to deal with waking up sleeping
processes,
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64576 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
The logic around blocking_region_begin is confusing to me,
but the goal of this patch is to ensure rb_sigwait_fd_get
and rb_sigwait_fd_put are matched.
In other words, we don't want a thread to hold sigwait_fd
forever if an exception is raised while calling select()
or ppoll().
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64550 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
I updated the patch with documentation but forgot about it,
earlier :x
[ruby-core:88616] [Misc #15014]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64535 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Relying on "struct timespec" was too annoying API-wise and
used more stack space. "double" was a bit wacky w.r.t rounding
in the past, so now we'll switch to using a 64-bit type.
Unsigned 64-bit integer is able to give us over nearly 585
years of range with nanoseconds. This range is good enough
for the Linux kernel internal time representation, so it
ought to be good enough for us.
This reduces the stack usage of functions while GVL is held
(and thus subject to marking) on x86-64 Linux (with ppoll):
rb_wait_for_single_fd 120 => 104
do_select 120 => 88
[ruby-core:88582] [Misc #15014]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64533 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Based on r64478, any regular user creating more than 1024 pipes
on Linux will end up with tiny pipes with only a single page
capacity. So avoid wasting user resources and use lighter
eventfd on Linux.
[ruby-core:88563] [Misc #15011]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64527 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Line coverage was based on special instruction "tracecoverage".
Now, instead, it uses the mechanism of trace hook [Feature #14104].
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64509 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
When coverage measurement is enabled, the compiler makes each iseq have
a reference to the counter array of coverage.
Even after coverage measurement is disabled, the reference is kept.
And, if coverage measurement is restarted, a coverage hook will increase
the counter. This is completely meaningless; it brings just overhead.
To remove this meaninglessness, this change removes all the reference
when coverage measuement is stopped.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64504 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Following ko1's lead in r59192, this gets rid of non-obvious
assignments which happen inside macros.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64490 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
According to r52446, it is only necessary for the current item (@i),
not the `@nxt` parameter for list_for_each_safe.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64486 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
It's possible for the ubf_list_head to be populated with dead
threads at fork or the ubf_list_lock to be held, so reinitialize
both at startup.
And while we're at it, use a static initializer at startup
to save a library call and kill some ifdef.
[ruby-core:88578] [Bug #15013]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64485 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
select(2) needs the nfds argument to be one higher than the
largest FD in the sets :x
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64475 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
We do not want to risk switching threads before going to sleep
because it can cause unexpected wakeups and put us in an
unexpected state when used with ConditionVariable.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64464 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Having threads switch before we sleep can cause applications
to misread the state of the thread. Now, we are consistent
with blocking_region_begin behavior and change th->status
AFTER checking interrupts.
Maybe this can fix [Bug #15002]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64449 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Spurious interrupts from SIGCHLD cause Mutex#sleep (via
ConditionVariable#wait) to return early and breaks some use
cases. Since these are outside the programs's control with
MJIT, we will only consider pending interrupts (e.g. those
from Thread#run) and signals which cause a Ruby-level Signal.trap
handler to fire as "spurious" wakeups.
[ruby-core:88537] [Feature #15002]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64444 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Same reasoning as the disarm in rb_sigwait_fd_get, the current
thread is already processing signals, so we do not need
UBF_TIMER to continually kick the process, anymore.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64390 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
On a 64-bit system, this reduces rb_thread_t from 536 to 520 bytes.
Depending on the allocation, this can reduce cacheline access
for checking the abort_on_exception, report_on_exception and
pending_interrupt_queue_checked flags.
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64376 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
This reverts commit 194a6a2c68 (r64203).
Race conditions which caused the original reversion will be fixed
in the subsequent commit.
[ruby-core:88360] [Misc #14937]
git-svn-id: svn+ssh://ci.ruby-lang.org/ruby/trunk@64352 b2dd03c8-39d4-4d8f-98ff-823fe69b080e
Jeremy Evans
Stefan Stüben
Benoit Daloze
Samuel Williams
Nobuyoshi Nakada
Koichi Sasada
Hiroshi SHIBATA
Matt Valentine-House
卜部昌平
Yusuke Endoh
Kazuhiro NISHIYAMA
Lourens Naudé
Eric Wong
Jean byroot Boussier
John Hawthorn
Ben Woosley
git
tenderlove
nobu
normal
ko1
k0kubun
mame
shyouhei