Packages found in the module cache do not change. When we encounter a
directory we have already processed in the module cache, skip that
directory and add the packages that have already been computed.
Change-Id: Ib1bf0bf22727110b8073b415b145034acceb6787
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186921
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
To check if a package is in a module that is in scope, the module
resolver checks if there are Go files that would be included in a
package in the directory matching the import path in scope.
If this directory is in the module cache and we have saved it as a
package, we know this directory contains Go files, and do not have to
read the directory.
Change-Id: I7c9365ce42c760ab95bc68b036212120895c89fb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/186922
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
The root of the module containing a package in the module cache can be
determined by looking at the directory path. Use this instead of
scanning up the file tree to find the mod file of a package from a
module cache. The go command prunes nested modules before populating
the module cache, so there is only one go.mod within each module.
Change-Id: I434a04350ef3ca2f44b7ffd08ccc5afe4209654f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190906
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Prepare rename gets the range of the identifier to rename. Returns an
error when there is no identifier to rename.
Change-Id: I5e5865bc9ff97e6a95ac4f0c48edddcfd0f9ed67
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191170
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Tests that use packagestest.Export already have GOPACKAGESDRIVER=off,
make sure the rest of the tests are setting it off to make sure the
value of GOPACKGESDRIVER doesn't affect tests that are run locally.
Fixesgolang/go#33956
Change-Id: If14dce17f413f46a3d36cdf2679e992ec9147a53
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192397
Run-TryBot: Michael Matloob <matloob@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Before this change, Cgo error was ignored only when the number of
the error message lines was exactly 2. There are many environments
where that condition did not work well.
This CL removes this condition. This is not a perfect solution
because the error message can include other message than Cgo.
However, this should work in most cases.
Updates golang/go#33462Fixesgolang/go#33859
Change-Id: I606fb9eab3cd1e73b88ac1add1a82aff53f36708
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191942
Run-TryBot: Hajime Hoshi <hajimehoshi@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Michael Matloob <matloob@golang.org>
Over time the existing implementation became buggy. This implementation
logs close to where data is read or written from the stream connected
to the client. As is required, the log records are from the point of view
of the client.
Fixesgolang/go#33755
Change-Id: I91150c697dc2cdb6d3eecbbed7a8d1805a7c476d
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191963
Run-TryBot: Peter Weinberger <pjw@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
The existence of two versions of vet, namely this one and the one in the
Go distribution, creates confusion. Remove this one.
Fixesgolang/go#31886
Change-Id: I351ad95329088f91f6a88452ee8e3654849f6ef2
Reviewed-on: https://go-review.googlesource.com/c/tools/+/192177
Run-TryBot: Michael Matloob <matloob@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Send the code action kinds that we support, if codeActionLiteralSupport
is specified. Editors may use the CodeActionKinds that we support to
determine UI layout for example.
Change-Id: Iee368aa02c26f4395bb2894593ef38d84d3283b7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191620
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Deep completions can take a long time (500ms+) if there are many
large, deeply nested structs in scope. To make sure we return
completion results in a timely manner we now notice if we have spent
"too long" searching for deep completions and reduce the search scope.
In particular, our overall completion budget is 100ms. This value is
often cited as the longest latency that still feels instantaneous to
most people. As we spend 25%, 50%, and 75% of our budget we limit our
deep completion candidate search depth to 4, 3, and 2,
respectively. If we hit 90% of our budget, we disable deep completions
entirely.
In my testing, limiting the search scope to 4 normally makes even
enormous searches finish in a few milliseconds. Of course, you can
have arbitrarily many objects in scope with arbitrarily many fields,
so to cover our bases we continue to dial down the search depth as
needed.
I replaced the "enabled" field with a "maxDepth" field that disables
deep search when set to 0.
Change-Id: I9b5a07de70709895c065503ae6082d1ea615d1af
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190978
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Much of this documentation has been collated from other sources,
but this pulls it all into one coherent and public structure in
a way that allows us to peer review changes.
Change-Id: Ic24a59bb92b27ec85d2f57affcf2eb396c9de3c0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191741
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
this makes sure that any diff implementation obeys the semantics we expect
at higher layers
Change-Id: Iae8842cfb9fece94ea71c04ec146d825eff0cbeb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191017
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Now we register for and handle didChangeWatchedFiles "change"
events. We don't handle "create" or "delete" yet.
When a file changes on disk, there are two basic cases. If the editor
has the file open, we want to ignore the change since we need to
respect the file contents in the editor. If the file isn't open in the
editor then we need to re-type check (and re-diagnose) any packages it
belongs to.
We will need special handling of go.mod changes, but start with
just *.go files for now.
I'm putting the new behavior behind an initialization flag while it is
under development.
Updates golang/go#31553
Change-Id: I81a767ebe12f5f82657752dcdfb069c5820cbaa0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190857
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This change allows renamings of the name of an import spec.
Since there is not always explicit identifier available to select and
rename, allow renaming packages from positions within the import spec.
Change-Id: I0a8aaa92c26e1795ddb9c31a1165b2f2ee89aa34
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191165
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
When there is an explicit name for an import spec, treat it as its own
identifier, separate from the import path.
Example:
import h "hello"
The name h is defined in that import spec, not in the package hello
it contains its own references. If asked about a position within the
import path, continue treating that as referencing the imported package.
If the position is within the name, use the identifier there that is
local to that file.
This change allows for go to definition of the explicit name to point to
itself, find all references from the import spec, and rename the
explicit name from the import spec.
Change-Id: Ia1d927a26e73f2dc450d256d71909c006bdf4c37
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191164
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Since renaming an identifier within an import spec is not yet supported,
return an error when this is encountered. These idents from the import
spec have a nil declaration object.
Import paths that contain '.' or '/' are caught by the valid identifier check
avoiding the crash, but import paths such as "fmt" are not as fmt is a
valid identifier. This change checks if i.decl.obj is nil and returns an error
if it is to avoid the crash.
Fixesgolang/go#33768
Change-Id: I4e757b42bedffd648fc821590e4a383826200dc3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/191163
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This will allow us to configure the connection at need.
It will also allow us to intercept the content for tests.
Change-Id: Id7d34f2d56f233eae112bea97cccab1f2a88de55
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190798
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
The module cache can only be added to, so any information discovered
about directories that are within a module in the module cache will
not change. Store the information we have discovered about the module
cache.
Updates #32750
Change-Id: I56c88f03f6a364221198fb032b139208497cd0e5
Reviewed-on: https://go-review.googlesource.com/c/tools/+/188762
Reviewed-by: Heschi Kreinick <heschi@google.com>
Optimize a few things to speed up deep completions:
- item() is slow, so don't call it unless the candidate's name matches
the input.
- We only end up returning the top 3 deep candidates, so skip deep
candidates early if they are not in the top 3 scores we have seen so
far. This greatly reduces calls to item(), but also avoids a
humongous sort in lsp/completion.go.
- Get rid of error return value from found(). Nothing checked for this
error, and we spent a lot of time allocating the only possible error
"this candidate is not accessible", which is not unexpected to begin
with.
- Cache the call to types.NewMethodSet in methodsAndFields(). This is
relatively expensive and can be called many times for the same type
when searching for deep completions.
- Avoid calling deepState.chainString() twice by calling it once and
storing the result on the candidate.
These optimizations sped up my slow completion from 1.5s to
0.5s. There were around 200k deep candidates examined for this one
completion. The remaining time is dominated by the fuzzy
matcher. Obviously 500ms is still unacceptable under any
circumstances, so there will be subsequent improvements to limit the
deep completion search scope to make sure we always return completions
in a reasonable amount of time.
I also made it so there is always a "matcher" set on the
completer. This makes the matching logic a bit simpler.
Change-Id: Id48ef7031ee1d4ea04515c828277384562b988a8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190522
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
this moves the actual diff algorithm into a different package and then provides hooks so it can be easily replaced with an alternate algorithm.
Change-Id: Ia0359f58878493599ea0e0fda8920f21100e16f1
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190898
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This changes to use a mutex and directly execute the less performance
sensitive telemetry calls (tracing and logging) and then uses a submission
queue only for stats adjustments as those are much more sensitive (but it
should also be easier to keep up with them in bursts)
Fixesgolang/go#33692
Change-Id: Ia59a8975f21dfbfcf115be1f1d11b097be8dd9c8
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190737
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
Test that having a comment at the start of a file allows imports
to be added correctly.
Updates golang/go#33721
Change-Id: Id1673c2509537413710b73261ad2a59afe06b93f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190800
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Insert imports into existing multiline import declarations when
possible.
Logic for choosing where to insert taken from
golang.org/x/tools/go/ast/astutil.
Change-Id: Ie5ad96d5e3d5db2e92a2c05a6104d14a4a192ed3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190598
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This is a super minimal change that will simplify the diffs for when I
actually delete the getMapper function.
Change-Id: I16984b344c87b3645fd451668b6ea747c5be12ab
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190557
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Unimported packages may be suggested as completion items. Since these
are not yet imported, they should be ranked lower than other candidates.
They also require an additional import statement to be valid, which is
provided as an AdditionalTextEdit.
Adding this import does not use astutil.AddNamedImport, to avoid
editing the current ast and work even if there are errors. Additionally,
it can be hard to determine what changes need to be made to the source
document from the ast, as astutil.AddNamedImport includes a merging
pass. Instead, the completion item simply adds another import
declaration.
Change-Id: Icbde226d843bd49ee3713cafcbd5299d51530695
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190338
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This is the first in a series of many changes that will change the API
of the source package to use different types for positions. Using
token.Pos is particularly fragile, since the pos has to refer to the
specific *ast.File from which it was derived.
Change-Id: I70c9b806f7dd45b2e229954ebdcdd86e2cf3bbbb
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190340
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Rename checks all of the packages that may be affected for conflicts. An
error in any of them leads to renaming error. Returning errors from
multiple packages may be confusing (for example, when there is a test
variant of a package and the same error appears twice). This change
stops after an error is found and returns that error instead of
continuing to search.
Change-Id: Ifba1feddbf8829d3aad30309154d578967e05a36
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190416
Run-TryBot: Suzy Mueller <suzmue@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
This exposes the candidate imports that are discovered, even if there is
not a particular reference that requires it to be imported. Currently,
this only produces results for standard library packages.
This is useful for autocompletion on unimported packages.
Change-Id: Iafd883153d451a0ef1dae29b24d4d48530c855f7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189999
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
this shuffles things so there a single exporter API rather than an observer
It also removes most of the globals.
per telemetry type.
Change-Id: Iaa82abe2ded1fff9df8e067ed4a55bcbd9d9591f
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190405
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This change will just make it a bit easier to debug the context
cancellation errors.
Change-Id: I580751ac04e3357031678eb31914828029c96e4b
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190412
Run-TryBot: Rebecca Stambler <rstambler@golang.org>
TryBot-Result: Gobot Gobot <gobot@golang.org>
Reviewed-by: Ian Cottrell <iancottrell@google.com>
This makes the code read slightly better, and more closely
aligns with the open telemetry code.
Change-Id: I87eaf7d08b802f7862f896f2654456ee6a7681e3
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190404
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
This is a straight move of some code with no changes.
It splits the part of the telemetry code that will become a standalone library from the bit that belongs in the lsp.
Change-Id: Icedb6bf1f3711da9251450531729984df6df7787
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190403
Run-TryBot: Ian Cottrell <iancottrell@google.com>
Reviewed-by: Emmanuel Odeke <emm.odeke@gmail.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
We need to limit the concurrent file reads to prevent `too many open
file` errors. The first attempt to solve this was done in change 189437,
but this change turned out to be incorrect.
So this change reverts the changes made in change 189437 and instead
adds an new semaphore around the `nativeFileHandle.Read` method.
The limit is currently set to half of the lowest open file system limit
of *nix, Windows and MacOS system (their respective limits are 1024, 16384,
and 256).
Change-Id: I27d741e3a3c36eb11bfa7457575f5d5831c06ad7
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190417
Reviewed-by: Ian Cottrell <iancottrell@google.com>
Run-TryBot: Ian Cottrell <iancottrell@google.com>
TryBot-Result: Gobot Gobot <gobot@golang.org>
This fix adds all packages to the renamer packages map.
Renaming performs checks on each package to make sure there are no
conflicts. If there are multiple packages, each package needs to be
checked. The packages were being incorrectly added to the map and were
all being put under a single key.
Fixesgolang/go#33664
Change-Id: I68466ce34ac49b700ce6d14ce0b53e2795926fa9
Reviewed-on: https://go-review.googlesource.com/c/tools/+/190399
Reviewed-by: Rebecca Stambler <rstambler@golang.org>
When an import is added to the ast, the import declarations are merged
together into the first import declaration. Since this is a part of
the formatting functionality of goimports, do this during formatting
regardless.
The merging pass was added to astutil.AddNamedImport in order to address
issue golang/go#14075. This joined imports from other blocks into the first
import declaration, so that a single block of imports isn't split across
multiple blocks.
This functionality is more of a formatting change than a fix imports
change, in line with sorting the imports, which occurs even when
FormatOnly. The formatting was only applied when an import was added
(not renamed or deleted). This change makes formatting by goimports
more consistent across runs and is not dependent on the exact fixes
that need to be applied.
Change-Id: Icb90bf694ff35e2d6405a3d477cf82fcd3e697e0
Reviewed-on: https://go-review.googlesource.com/c/tools/+/189941
Run-TryBot: Suzy Mueller <suzmue@golang.org>
Reviewed-by: Heschi Kreinick <heschi@google.com>
Suzy Mueller
Bryan C. Mills
Michael Matloob
Rebecca Stambler
Hajime Hoshi
Peter Weinberger
Muir Manders
Ian Cottrell
Ian Cottrell
Jan Steinke
Dominik Honnef
Tobias Klauser
Kevin Burke
Anderson Queiroz
Andrew Bonventre
Sander van Harmelen