Microsoft Application Insights SDK for Go

This project provides a Go SDK for Application Insights. Application Insights is a service that allows developers to keep their applications available, performant, and successful. This go package will allow you to send telemetry of various kinds (event, metric, trace) to the Application Insights service where they can be visualized in the Azure Portal.

Status

This SDK is NOT maintained or supported by Microsoft even though we've contributed to it in the past. Note that Azure Monitor only provides support when using our supported SDKs, and this SDK does not yet meet that standard. Known gaps include:

• Operation correlation is not supported, but this can be managed by the caller through the interfaces that exist today.
• Sampling is not supported. The more mature SDKs support dynamic sampling, but at present this does not even support manual sampling.
• Automatic collection of events is not supported. All telemetry must be explicitly collected and sent by the user.
• Offline storage of telemetry is not supported. The .Net SDK is capable of spilling events to disk in case of network interruption. This SDK has no such feature.

We’re constantly assessing opportunities to expand our support for other languages, so follow our GitHub Announcements page to receive the latest SDK news.

Requirements

Install

go get github.com/microsoft/ApplicationInsights-Go/appinsights

Get an instrumentation key

Note: an instrumentation key is required before any data can be sent. Please see the "Getting an Application Insights Instrumentation Key" section of the wiki for more information. To try the SDK without an instrumentation key, set the instrumentationKey config value to a non-empty string.

Usage

Setup

To start tracking telemetry, you'll want to first initialize a telemetry client.

import "github.com/microsoft/ApplicationInsights-Go/appinsights"

func main() {
	client := appinsights.NewTelemetryClient("<instrumentation key>")
}

If you want more control over the client's behavior, you should initialize a new TelemetryConfiguration object and use it to create a client:

import "time"
import "github.com/microsoft/ApplicationInsights-Go/appinsights"

func main() {
	telemetryConfig := appinsights.NewTelemetryConfiguration("<instrumentation key>")
	
	// Configure how many items can be sent in one call to the data collector:
	telemetryConfig.MaxBatchSize = 8192
	
	// Configure the maximum delay before sending queued telemetry:
	telemetryConfig.MaxBatchInterval = 2 * time.Second
	
	client := appinsights.NewTelemetryClientFromConfig(telemetryConfig)
}

This client will be used to submit all of your telemetry to Application Insights. This SDK does not presently collect any telemetry automatically, so you will use this client extensively to report application health and status. You may want to store it in a global variable or otherwise include it in your data model.

Telemetry submission

The TelemetryClient itself has several methods for submitting telemetry:

type TelemetryClient interface {
	// (much omitted)

	// Log a user action with the specified name
	TrackEvent(name string)

	// Log a numeric value that is not specified with a specific event.
	// Typically used to send regular reports of performance indicators.
	TrackMetric(name string, value float64)

	// Log a trace message with the specified severity level.
	TrackTrace(name string, severity contracts.SeverityLevel)

	// Log an HTTP request with the specified method, URL, duration and
	// response code.
	TrackRequest(method, url string, duration time.Duration, responseCode string)

	// Log a dependency with the specified name, type, target, and
	// success status.
	TrackRemoteDependency(name, dependencyType, target string, success bool)

	// Log an availability test result with the specified test name,
	// duration, and success status.
	TrackAvailability(name string, duration time.Duration, success bool)

	// Log an exception with the specified error, which may be a string,
	// error or Stringer. The current callstack is collected
	// automatically.
	TrackException(err interface{})
}

These may be used directly to log basic telemetry a manner you might expect:

client.TrackMetric("Queue Length", len(queue))

client.TrackEvent("Client connected")

But the inputs to these methods only capture the very basics of what these telemetry types can represent. For example, all telemetry supports custom properties, which are inaccessible through the above methods. More complete versions are available through use of telemetry item classes, which can then be submitted through the TelemetryClient.Track method, as illustrated in the below sections:

Trace

Trace telemetry items represent printf-like trace statements that can be text searched. They have an associated severity level, values for which are found in the package's constants:

const (
	Verbose     contracts.SeverityLevel = contracts.Verbose
	Information contracts.SeverityLevel = contracts.Information
	Warning     contracts.SeverityLevel = contracts.Warning
	Error       contracts.SeverityLevel = contracts.Error
	Critical    contracts.SeverityLevel = contracts.Critical
)

Trace telemetry is fairly simple, but common telemetry properties are also available:

trace := appinsights.NewTraceTelemetry("message", appinsights.Warning)

// You can set custom properties on traces
trace.Properties["module"] = "server"

// You can also fudge the timestamp:
trace.Timestamp = time.Now().Sub(time.Minute)

// Finally, track it
client.Track(trace)

Events

Event telemetry items represent structured event records.

event := appinsights.NewEventTelemetry("button clicked")
event.Properties["property"] = "value"
client.Track(event)

Single-value metrics

Metric telemetry items each represent a single data point.

metric := appinsights.NewMetricTelemetry("Queue length", len(q.items))
metric.Properties["Queue name"] = q.name
client.Track(metric)

Pre-aggregated metrics

To reduce the number of metric values that may be sent through telemetry, when using a particularly high volume of measurements, metric data can be pre-aggregated by the client and submitted all at once.

aggregate := appinsights.NewAggregateMetricTelemetry("metric name")

var dataPoints []float64
// ...collect data points...

// If the data is sampled, then one should use the AddSampledData method to
// feed data to this telemetry type.
aggregate.AddSampledData(dataPoints)

// If the entire population of data points is known, then one should instead
// use the AddData method.  The difference between the two is the manner in
// which the standard deviation is calculated.
aggregate.AddData(dataPoints)

// Alternatively, you can aggregate the data yourself and supply it to this
// telemetry item:
aggregate.Value = sum(dataPoints)
aggregate.Min = min(dataPoints)
aggregate.Max = max(dataPoints)
aggregate.Count = len(dataPoints)
aggregate.StdDev = stdDev(dataPoints)

// Custom properties could be further added here...

// Finally, track it:
client.Track(aggregate)

Requests

Request telemetry items represent completion of an external request to the application and contains a summary of that request execution and results. This SDK's request telemetry is focused on HTTP requests.

request := appinsights.NewRequestTelemetry("GET", "https://microsoft.com/", duration, "<response code>")

// Note that the timestamp will be set to time.Now() minus the
// specified duration.  This can be overridden by either manually
// setting the Timestamp and Duration fields, or with MarkTime:
request.MarkTime(requestStartTime, requestEndTime)

// Source of request
request.Source = clientAddress

// Success is normally inferred from the responseCode, but can be overridden:
request.Success = false

// Request ID's are randomly generated GUIDs, but this can also be overridden:
request.Id = "<id>"

// Custom properties and measurements can be set here
request.Properties["user-agent"] = request.headers["User-agent"]
request.Measurements["POST size"] = float64(len(data))

// Context tags become more useful here as well
request.Tags.Session().SetId("<session id>")
request.Tags.User().SetAccountId("<user id>")

// Finally track it
client.Track(request)

Dependencies

Remote dependency telemetry items represent interactions of the monitored component with a remote component/service like SQL or an HTTP endpoint.

dependency := appinsights.NewRemoteDependencyTelemetry("Redis cache", "Redis", "<target>", true /* success */)

// The result code is typically an error code or response status code
dependency.ResultCode = "OK"

// Id's can be used for correlation if the remote end is also logging
// telemetry through application insights.
dependency.Id = "<request id>"

// Data may contain the exact URL hit or SQL statements
dependency.Data = "MGET <args>"

// The duration can be set directly:
dependency.Duration = time.Minute
// or via MarkTime:
dependency.MarkTime(startTime, endTime)

// Properties and measurements may be set.
dependency.Properties["shard-instance"] = "<name>"
dependency.Measurements["data received"] = float64(len(response.data))

// Submit the telemetry
client.Track(dependency)

Exceptions

Exception telemetry items represent handled or unhandled exceptions that occurred during the execution of the monitored application. This SDK is geared towards handling panics or unexpected results from important functions:

To handle a panic:

func method(client appinsights.TelemetryClient) {
	defer func() {
		if r := recover(); r != nil {
			// Track the panic
			client.TrackException(r)

			// Optionally, you may want to re-throw the panic:
			panic(r)
		}
	}()
	
	// Panics in any code below will be handled by the above.
	panic("AHHHH!!")
}

This can be condensed with a helper function:

func method(client appinsights.TelemetryClient) {
	// false indicates that we should have this handle the panic, and
	// not re-throw it.
	defer appinsights.TrackPanic(client, false)
	
	// Panics in any code below will be handled by the above.
	panic("AHHHH!!")
}

This will capture and report the call stack of the panic, including the site of the function that handled the panic. Do note that Go does not unwind the callstack while processing panics, so the trace will include any functions that may be called by method in the example above leading up to the panic.

This SDK will handle panic messages that are any of the types: string, error, or anything that implements fmt.Stringer or fmt.GoStringer.

While the above example uses client.TrackException, you can also use the longer form as in earlier examples -- and not only for panics:

value, err := someMethod(argument)
if err != nil {
	exception := appinsights.NewExceptionTelemetry(err)
	
	// Set the severity level -- perhaps this isn't a critical
	// issue, but we'd *really rather* it didn't fail:
	exception.SeverityLevel = appinsights.Warning
	
	// One could tweak the number of stack frames to skip by
	// reassigning the callstack -- for instance, if you were to
	// log this exception in a helper method.
	exception.Frames = appinsights.GetCallstack(3 /* frames to skip */)
	
	// Properties are available as usual
	exception.Properties["input"] = argument
	
	// Track the exception
	client.Track(exception)
}

Availability

Availability telemetry items represent the result of executing an availability test. This is useful if you are writing availability monitors in Go.

availability := appinsights.NewAvailabilityTelemetry("test name", callDuration, true /* success */)

// The run location indicates where the test was run from
availability.RunLocation = "Phoenix"

// Diagnostics message
availability.Message = diagnostics

// Id is used for correlation with the target service
availability.Id = requestId

// Timestamp and duration can be changed through MarkTime, similar
// to other telemetry types with Duration's
availability.MarkTime(testStartTime, testEndTime)

// Submit the telemetry
client.Track(availability)

Page Views

Page view telemetry items represent generic actions on a page like a button click. These are typically generated by the client side rather than the server side, but is available here nonetheless.

pageview := appinsights.NewPageViewTelemetry("Event name", "http://testuri.org/page")

// A duration is available here.
pageview.Duration = time.Minute

// As are the usual Properties and Measurements...

// Track
client.Track(pageview)

Context tags

Telemetry items all have a Tags property that contains information about the submitted telemetry, such as user, session, and device information. The Tags property is an instance of the contracts.ContextTags type, which is a map[string]string under the hood, but has helper methods to access the most commonly used data. An instance of TelemetryContext exists on the TelemetryClient, and also contains a Tags property. These tags are applied to all telemetry sent through the client. If a context tag is found on both the client's TelemetryContext and in the telemetry item's Tags, the value associated with the telemtry takes precedence.

A few examples for illustration:

import (
	"os"
	
	"github.com/microsoft/ApplicationInsights-Go/appinsights"
	"github.com/microsoft/ApplicationInsights-Go/appinsights/contracts"
)

func main() {
	client := appinsights.NewTelemetryClient("<ikey>")
	
	// Set role instance name globally -- this is usually the
	// name of the service submitting the telemetry
	client.Context().Tags.Cloud().SetRole("my_go_server")
	
	// Set the role instance to the host name.  Note that this is
	// done automatically by the SDK.
	client.Context().Tags.Cloud().SetRoleInstance(os.Hostname())
	
	// Make a request to fiddle with the telemetry's context
	req := appinsights.NewRequestTelemetry("GET", "http://server/path", time.Millisecond, "200")
	
	// Set the account ID context tag, for this telemetry item
	// only.  The following are equivalent:
	req.Tags.User().SetAccountId("<user account retrieved from request>")
	req.Tags[contracts.UserAccountId] = "<user account retrieved from request>"
	
	// This request will have all context tags above.
	client.Track(req)
}

Common properties

In the same way that context tags can be written to all telemetry items, the TelemetryContext has a CommonProperties map. Entries in this map will be added to all telemetry items' custom properties (unless a telemetry item already has that property set -- the telemetry item always has precedence). This is useful for contextual data that may not be captured in the context tags, for instance cluster identifiers or resource groups.

func main() {
	client := appinsights.NewTelemetryClient("<ikey>")
	
	client.Context().CommonProperties["Resource group"] = "My resource group"
	// ...
}

Shutdown

The Go SDK submits data asynchronously. The InMemoryChannel launches its own goroutine used to accept and send telemetry. If you're not careful, this may result in lost telemetry when the service needs to shut down. The channel has a few methods to deal with this case:

• Flush will trigger telemetry submission for buffered items. It returns immediately and telemetry is not guaranteed to have been sent.
• Stop will immediately shut down the channel and discard any unsubmitted telemetry. Useful if you need to exit NOW.
• Close will cause the channel to stop accepting new telemetry, submit any pending telemetry, and returns a channel that closes when the telemetry buffer is fully empty. If telemetry submission fails, then Close will retry until the specified duration elapses. If no duration is specified, then it will give up if any telemetry submission fails.

If at all possible, you should use Close:

func main() {
	client := appinsights.NewTelemetryClient("<ikey>")
	
	// ... run the service ...
	
	// on shutdown:
	
	select {
	case <-client.Channel().Close(10 * time.Second):
		// Ten second timeout for retries.
		
		// If we got here, then all telemetry was submitted
		// successfully, and we can proceed to exiting.
	case <-time.After(30 * time.Second):
		// Thirty second absolute timeout.  This covers any
		// previous telemetry submission that may not have
		// completed before Close was called.
		
		// There are a number of reasons we could have
		// reached here.  We gave it a go, but telemetry
		// submission failed somewhere.  Perhaps old events
		// were still retrying, or perhaps we're throttled.
		// Either way, we don't want to wait around for it
		// to complete, so let's just exit.
	}
}

We recommend something similar to the above to minimize lost telemetry through shutdown. The documentation explains in more detail what can lead to the cases above.

Diagnostics

If you find yourself missing some of the telemetry that you thought was submitted, diagnostics can be turned on to help troubleshoot problems with telemetry submission.

appinsights.NewDiagnosticsMessageListener(func(msg string) error {
	fmt.Printf("[%s] %s\n", time.Now().Format(time.UnixDate), msg)
	return nil
})

// go about your business...

The SDK will emit messages during every telemetry submission. Successful submissions will look something like this:

[Tue Nov 21 18:59:41 PST 2017] --------- Transmitting 16 items ---------
[Tue Nov 21 18:59:41 PST 2017] Telemetry transmitted in 708.382896ms
[Tue Nov 21 18:59:41 PST 2017] Response: 200

If telemetry is rejected, the errors from the data collector endpoint will be displayed:

[Tue Nov 21 18:58:39 PST 2017] --------- Transmitting 16 items ---------
[Tue Nov 21 18:58:40 PST 2017] Telemetry transmitted in 1.034608896s
[Tue Nov 21 18:58:40 PST 2017] Response: 206
[Tue Nov 21 18:58:40 PST 2017] Items accepted/received: 15/16
[Tue Nov 21 18:58:40 PST 2017] Errors:
[Tue Nov 21 18:58:40 PST 2017] #9 - 400 109: Field 'name' on type 'RemoteDependencyData' is required but missing or empty. Expected: string, Actual:
[Tue Nov 21 18:58:40 PST 2017] Telemetry item:
        {"ver":1,"name":"Microsoft.ApplicationInsights.RemoteDependency","time":"2017-11-22T02:58:39Z","sampleRate":100,"seq":"","iKey":"<ikey>","tags":{"ai.cloud.roleInstance":"<hostname>","ai.device.id":"<hostname>","ai.device.osVersion":"linux","ai.internal.sdkVersion":"go:0.4.0-pre","ai.operation.id":"bf755161-7725-490c-872e-69815826a94c"},"data":{"baseType":"RemoteDependencyData","baseData":{"ver":2,"name":"","id":"","resultCode":"","duration":"0.00:00:00.0000000","success":true,"data":"","target":"http://bing.com","type":"HTTP"}}}

[Tue Nov 21 18:58:40 PST 2017] Refusing to retry telemetry submission (retry==false)

Information about retries, server throttling, and more from the SDK's perspective will also be available.

Please include this diagnostic information (with ikey's blocked out) when submitting bug reports to this project.