1.9 KiB
1.9 KiB
K4ARecorder
Introduction
K4ARecorder is a command line utility for creating Azure Kinect device recordings. Recordings are saved in the Matroska (MKV) format, using multiple tracks to store each sensor stream in a single file.
Usage Info
k4arecorder [options] output.mkv
Options:
-h, --help Prints this help
--list List the currently connected K4A devices
--device Specify the device index to use (default: 0)
-l, --record-length Limit the recording to N seconds (default: infinite)
-c, --color-mode Set the color sensor mode (default: 1080p), Available options:
3072p, 2160p, 1536p, 1440p, 1080p, 720p, 720p_NV12, 720p_YUY2, OFF
-d, --depth-mode Set the depth sensor mode (default: NFOV_UNBINNED), Available options:
NFOV_2X2BINNED, NFOV_UNBINNED, WFOV_2X2BINNED, WFOV_UNBINNED, PASSIVE_IR, OFF
--depth-delay Set the time offset between color and depth frames in microseconds (default: 0)
A negative value means depth frames will arrive before color frames.
The delay must be less than 1 frame period.
-r, --rate Set the camera frame rate in Frames per Second
Default is the maximum rate supported by the camera modes.
Available options: 30, 15, 5
--imu Set the IMU recording mode (ON, OFF, default: ON)
--external-sync Set the external sync mode (Master, Subordinate, Standalone default: Standalone)
--sync-delay Set the external sync delay off the master camera in microseconds (default: 0)
This setting is only valid if the camera is in Subordinate mode.
-e, --exposure-control Set manual exposure value (-11 to 1) for the RGB camera (default: auto exposure)