WSL2-Linux-Kernel/fs/ext4/super.c

4040 строки
113 KiB
C
Исходник Обычный вид История

/*
* linux/fs/ext4/super.c
*
* Copyright (C) 1992, 1993, 1994, 1995
* Remy Card (card@masi.ibp.fr)
* Laboratoire MASI - Institut Blaise Pascal
* Universite Pierre et Marie Curie (Paris VI)
*
* from
*
* linux/fs/minix/inode.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* Big-endian to little-endian byte-swapping/bitmaps by
* David S. Miller (davem@caip.rutgers.edu), 1995
*/
#include <linux/module.h>
#include <linux/string.h>
#include <linux/fs.h>
#include <linux/time.h>
#include <linux/vmalloc.h>
#include <linux/jbd2.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/parser.h>
#include <linux/smp_lock.h>
#include <linux/buffer_head.h>
#include <linux/exportfs.h>
#include <linux/vfs.h>
#include <linux/random.h>
#include <linux/mount.h>
#include <linux/namei.h>
#include <linux/quotaops.h>
#include <linux/seq_file.h>
#include <linux/proc_fs.h>
#include <linux/ctype.h>
#include <linux/log2.h>
Ext4: Uninitialized Block Groups In pass1 of e2fsck, every inode table in the fileystem is scanned and checked, regardless of whether it is in use. This is this the most time consuming part of the filesystem check. The unintialized block group feature can greatly reduce e2fsck time by eliminating checking of uninitialized inodes. With this feature, there is a a high water mark of used inodes for each block group. Block and inode bitmaps can be uninitialized on disk via a flag in the group descriptor to avoid reading or scanning them at e2fsck time. A checksum of each group descriptor is used to ensure that corruption in the group descriptor's bit flags does not cause incorrect operation. The feature is enabled through a mkfs option mke2fs /dev/ -O uninit_groups A patch adding support for uninitialized block groups to e2fsprogs tools has been posted to the linux-ext4 mailing list. The patches have been stress tested with fsstress and fsx. In performance tests testing e2fsck time, we have seen that e2fsck time on ext3 grows linearly with the total number of inodes in the filesytem. In ext4 with the uninitialized block groups feature, the e2fsck time is constant, based solely on the number of used inodes rather than the total inode count. Since typical ext4 filesystems only use 1-10% of their inodes, this feature can greatly reduce e2fsck time for users. With performance improvement of 2-20 times, depending on how full the filesystem is. The attached graph shows the major improvements in e2fsck times in filesystems with a large total inode count, but few inodes in use. In each group descriptor if we have EXT4_BG_INODE_UNINIT set in bg_flags: Inode table is not initialized/used in this group. So we can skip the consistency check during fsck. EXT4_BG_BLOCK_UNINIT set in bg_flags: No block in the group is used. So we can skip the block bitmap verification for this group. We also add two new fields to group descriptor as a part of uninitialized group patch. __le16 bg_itable_unused; /* Unused inodes count */ __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */ bg_itable_unused: If we have EXT4_BG_INODE_UNINIT not set in bg_flags then bg_itable_unused will give the offset within the inode table till the inodes are used. This can be used by fsck to skip list of inodes that are marked unused. bg_checksum: Now that we depend on bg_flags and bg_itable_unused to determine the block and inode usage, we need to make sure group descriptor is not corrupt. We add checksum to group descriptor to detect corruption. If the descriptor is found to be corrupt, we mark all the blocks and inodes in the group used. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-17 02:38:25 +04:00
#include <linux/crc16.h>
#include <asm/uaccess.h>
#include "ext4.h"
#include "ext4_jbd2.h"
#include "xattr.h"
#include "acl.h"
#include "mballoc.h"
#define CREATE_TRACE_POINTS
#include <trace/events/ext4.h>
static int default_mb_history_length = 1000;
module_param_named(default_mb_history_length, default_mb_history_length,
int, 0644);
MODULE_PARM_DESC(default_mb_history_length,
"Default number of entries saved for mb_history");
struct proc_dir_entry *ext4_proc_root;
static struct kset *ext4_kset;
static int ext4_load_journal(struct super_block *, struct ext4_super_block *,
unsigned long journal_devnum);
static int ext4_commit_super(struct super_block *sb, int sync);
static void ext4_mark_recovery_complete(struct super_block *sb,
struct ext4_super_block *es);
static void ext4_clear_journal_err(struct super_block *sb,
struct ext4_super_block *es);
static int ext4_sync_fs(struct super_block *sb, int wait);
static const char *ext4_decode_error(struct super_block *sb, int errno,
char nbuf[16]);
static int ext4_remount(struct super_block *sb, int *flags, char *data);
static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf);
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 03:40:58 +03:00
static int ext4_unfreeze(struct super_block *sb);
static void ext4_write_super(struct super_block *sb);
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 03:40:58 +03:00
static int ext4_freeze(struct super_block *sb);
ext4_fsblk_t ext4_block_bitmap(struct super_block *sb,
struct ext4_group_desc *bg)
{
return le32_to_cpu(bg->bg_block_bitmap_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
(ext4_fsblk_t)le32_to_cpu(bg->bg_block_bitmap_hi) << 32 : 0);
}
ext4_fsblk_t ext4_inode_bitmap(struct super_block *sb,
struct ext4_group_desc *bg)
{
return le32_to_cpu(bg->bg_inode_bitmap_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
(ext4_fsblk_t)le32_to_cpu(bg->bg_inode_bitmap_hi) << 32 : 0);
}
ext4_fsblk_t ext4_inode_table(struct super_block *sb,
struct ext4_group_desc *bg)
{
return le32_to_cpu(bg->bg_inode_table_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
(ext4_fsblk_t)le32_to_cpu(bg->bg_inode_table_hi) << 32 : 0);
}
__u32 ext4_free_blks_count(struct super_block *sb,
struct ext4_group_desc *bg)
{
return le16_to_cpu(bg->bg_free_blocks_count_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
(__u32)le16_to_cpu(bg->bg_free_blocks_count_hi) << 16 : 0);
}
__u32 ext4_free_inodes_count(struct super_block *sb,
struct ext4_group_desc *bg)
{
return le16_to_cpu(bg->bg_free_inodes_count_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
(__u32)le16_to_cpu(bg->bg_free_inodes_count_hi) << 16 : 0);
}
__u32 ext4_used_dirs_count(struct super_block *sb,
struct ext4_group_desc *bg)
{
return le16_to_cpu(bg->bg_used_dirs_count_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
(__u32)le16_to_cpu(bg->bg_used_dirs_count_hi) << 16 : 0);
}
__u32 ext4_itable_unused_count(struct super_block *sb,
struct ext4_group_desc *bg)
{
return le16_to_cpu(bg->bg_itable_unused_lo) |
(EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT ?
(__u32)le16_to_cpu(bg->bg_itable_unused_hi) << 16 : 0);
}
void ext4_block_bitmap_set(struct super_block *sb,
struct ext4_group_desc *bg, ext4_fsblk_t blk)
{
bg->bg_block_bitmap_lo = cpu_to_le32((u32)blk);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
bg->bg_block_bitmap_hi = cpu_to_le32(blk >> 32);
}
void ext4_inode_bitmap_set(struct super_block *sb,
struct ext4_group_desc *bg, ext4_fsblk_t blk)
{
bg->bg_inode_bitmap_lo = cpu_to_le32((u32)blk);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
bg->bg_inode_bitmap_hi = cpu_to_le32(blk >> 32);
}
void ext4_inode_table_set(struct super_block *sb,
struct ext4_group_desc *bg, ext4_fsblk_t blk)
{
bg->bg_inode_table_lo = cpu_to_le32((u32)blk);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
bg->bg_inode_table_hi = cpu_to_le32(blk >> 32);
}
void ext4_free_blks_set(struct super_block *sb,
struct ext4_group_desc *bg, __u32 count)
{
bg->bg_free_blocks_count_lo = cpu_to_le16((__u16)count);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
bg->bg_free_blocks_count_hi = cpu_to_le16(count >> 16);
}
void ext4_free_inodes_set(struct super_block *sb,
struct ext4_group_desc *bg, __u32 count)
{
bg->bg_free_inodes_count_lo = cpu_to_le16((__u16)count);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
bg->bg_free_inodes_count_hi = cpu_to_le16(count >> 16);
}
void ext4_used_dirs_set(struct super_block *sb,
struct ext4_group_desc *bg, __u32 count)
{
bg->bg_used_dirs_count_lo = cpu_to_le16((__u16)count);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
bg->bg_used_dirs_count_hi = cpu_to_le16(count >> 16);
}
void ext4_itable_unused_set(struct super_block *sb,
struct ext4_group_desc *bg, __u32 count)
{
bg->bg_itable_unused_lo = cpu_to_le16((__u16)count);
if (EXT4_DESC_SIZE(sb) >= EXT4_MIN_DESC_SIZE_64BIT)
bg->bg_itable_unused_hi = cpu_to_le16(count >> 16);
}
/*
* Wrappers for jbd2_journal_start/end.
*
* The only special thing we need to do here is to make sure that all
* journal_end calls result in the superblock being marked dirty, so
* that sync() will call the filesystem's write_super callback if
* appropriate.
*/
handle_t *ext4_journal_start_sb(struct super_block *sb, int nblocks)
{
journal_t *journal;
if (sb->s_flags & MS_RDONLY)
return ERR_PTR(-EROFS);
/* Special case here: if the journal has aborted behind our
* backs (eg. EIO in the commit thread), then we still need to
* take the FS itself readonly cleanly. */
journal = EXT4_SB(sb)->s_journal;
if (journal) {
if (is_journal_aborted(journal)) {
ext4_abort(sb, __func__, "Detected aborted journal");
return ERR_PTR(-EROFS);
}
return jbd2_journal_start(journal, nblocks);
}
/*
* We're not journaling, return the appropriate indication.
*/
current->journal_info = EXT4_NOJOURNAL_HANDLE;
return current->journal_info;
}
/*
* The only special thing we need to do here is to make sure that all
* jbd2_journal_stop calls result in the superblock being marked dirty, so
* that sync() will call the filesystem's write_super callback if
* appropriate.
*/
int __ext4_journal_stop(const char *where, handle_t *handle)
{
struct super_block *sb;
int err;
int rc;
if (!ext4_handle_valid(handle)) {
/*
* Do this here since we don't call jbd2_journal_stop() in
* no-journal mode.
*/
current->journal_info = NULL;
return 0;
}
sb = handle->h_transaction->t_journal->j_private;
err = handle->h_err;
rc = jbd2_journal_stop(handle);
if (!err)
err = rc;
if (err)
__ext4_std_error(sb, where, err);
return err;
}
void ext4_journal_abort_handle(const char *caller, const char *err_fn,
struct buffer_head *bh, handle_t *handle, int err)
{
char nbuf[16];
const char *errstr = ext4_decode_error(NULL, err, nbuf);
BUG_ON(!ext4_handle_valid(handle));
if (bh)
BUFFER_TRACE(bh, "abort");
if (!handle->h_err)
handle->h_err = err;
if (is_handle_aborted(handle))
return;
printk(KERN_ERR "%s: aborting transaction: %s in %s\n",
caller, errstr, err_fn);
jbd2_journal_abort_handle(handle);
}
/* Deal with the reporting of failure conditions on a filesystem such as
* inconsistencies detected or read IO failures.
*
* On ext2, we can store the error state of the filesystem in the
* superblock. That is not possible on ext4, because we may have other
* write ordering constraints on the superblock which prevent us from
* writing it out straight away; and given that the journal is about to
* be aborted, we can't rely on the current, or future, transactions to
* write out the superblock safely.
*
* We'll just use the jbd2_journal_abort() error code to record an error in
* the journal instead. On recovery, the journal will compain about
* that error until we've noted it down and cleared it.
*/
static void ext4_handle_error(struct super_block *sb)
{
struct ext4_super_block *es = EXT4_SB(sb)->s_es;
EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
if (sb->s_flags & MS_RDONLY)
return;
if (!test_opt(sb, ERRORS_CONT)) {
journal_t *journal = EXT4_SB(sb)->s_journal;
EXT4_SB(sb)->s_mount_flags |= EXT4_MF_FS_ABORTED;
if (journal)
jbd2_journal_abort(journal, -EIO);
}
if (test_opt(sb, ERRORS_RO)) {
ext4_msg(sb, KERN_CRIT, "Remounting filesystem read-only");
sb->s_flags |= MS_RDONLY;
}
ext4_commit_super(sb, 1);
if (test_opt(sb, ERRORS_PANIC))
panic("EXT4-fs (device %s): panic forced after error\n",
sb->s_id);
}
void ext4_error(struct super_block *sb, const char *function,
const char *fmt, ...)
{
va_list args;
va_start(args, fmt);
printk(KERN_CRIT "EXT4-fs error (device %s): %s: ", sb->s_id, function);
vprintk(fmt, args);
printk("\n");
va_end(args);
ext4_handle_error(sb);
}
static const char *ext4_decode_error(struct super_block *sb, int errno,
char nbuf[16])
{
char *errstr = NULL;
switch (errno) {
case -EIO:
errstr = "IO failure";
break;
case -ENOMEM:
errstr = "Out of memory";
break;
case -EROFS:
if (!sb || (EXT4_SB(sb)->s_journal &&
EXT4_SB(sb)->s_journal->j_flags & JBD2_ABORT))
errstr = "Journal has aborted";
else
errstr = "Readonly filesystem";
break;
default:
/* If the caller passed in an extra buffer for unknown
* errors, textualise them now. Else we just return
* NULL. */
if (nbuf) {
/* Check for truncated error codes... */
if (snprintf(nbuf, 16, "error %d", -errno) >= 0)
errstr = nbuf;
}
break;
}
return errstr;
}
/* __ext4_std_error decodes expected errors from journaling functions
* automatically and invokes the appropriate error response. */
void __ext4_std_error(struct super_block *sb, const char *function, int errno)
{
char nbuf[16];
const char *errstr;
/* Special case: if the error is EROFS, and we're not already
* inside a transaction, then there's really no point in logging
* an error. */
if (errno == -EROFS && journal_current_handle() == NULL &&
(sb->s_flags & MS_RDONLY))
return;
errstr = ext4_decode_error(sb, errno, nbuf);
printk(KERN_CRIT "EXT4-fs error (device %s) in %s: %s\n",
sb->s_id, function, errstr);
ext4_handle_error(sb);
}
/*
* ext4_abort is a much stronger failure handler than ext4_error. The
* abort function may be used to deal with unrecoverable failures such
* as journal IO errors or ENOMEM at a critical moment in log management.
*
* We unconditionally force the filesystem into an ABORT|READONLY state,
* unless the error response on the fs has been set to panic in which
* case we take the easy way out and panic immediately.
*/
void ext4_abort(struct super_block *sb, const char *function,
const char *fmt, ...)
{
va_list args;
va_start(args, fmt);
printk(KERN_CRIT "EXT4-fs error (device %s): %s: ", sb->s_id, function);
vprintk(fmt, args);
printk("\n");
va_end(args);
if (test_opt(sb, ERRORS_PANIC))
panic("EXT4-fs panic from previous error\n");
if (sb->s_flags & MS_RDONLY)
return;
ext4_msg(sb, KERN_CRIT, "Remounting filesystem read-only");
EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
sb->s_flags |= MS_RDONLY;
EXT4_SB(sb)->s_mount_flags |= EXT4_MF_FS_ABORTED;
if (EXT4_SB(sb)->s_journal)
jbd2_journal_abort(EXT4_SB(sb)->s_journal, -EIO);
}
void ext4_msg (struct super_block * sb, const char *prefix,
const char *fmt, ...)
{
va_list args;
va_start(args, fmt);
printk("%sEXT4-fs (%s): ", prefix, sb->s_id);
vprintk(fmt, args);
printk("\n");
va_end(args);
}
void ext4_warning(struct super_block *sb, const char *function,
const char *fmt, ...)
{
va_list args;
va_start(args, fmt);
printk(KERN_WARNING "EXT4-fs warning (device %s): %s: ",
sb->s_id, function);
vprintk(fmt, args);
printk("\n");
va_end(args);
}
void ext4_grp_locked_error(struct super_block *sb, ext4_group_t grp,
const char *function, const char *fmt, ...)
__releases(bitlock)
__acquires(bitlock)
{
va_list args;
struct ext4_super_block *es = EXT4_SB(sb)->s_es;
va_start(args, fmt);
printk(KERN_CRIT "EXT4-fs error (device %s): %s: ", sb->s_id, function);
vprintk(fmt, args);
printk("\n");
va_end(args);
if (test_opt(sb, ERRORS_CONT)) {
EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
ext4_commit_super(sb, 0);
return;
}
ext4_unlock_group(sb, grp);
ext4_handle_error(sb);
/*
* We only get here in the ERRORS_RO case; relocking the group
* may be dangerous, but nothing bad will happen since the
* filesystem will have already been marked read/only and the
* journal has been aborted. We return 1 as a hint to callers
* who might what to use the return value from
* ext4_grp_locked_error() to distinguish beween the
* ERRORS_CONT and ERRORS_RO case, and perhaps return more
* aggressively from the ext4 function in question, with a
* more appropriate error code.
*/
ext4_lock_group(sb, grp);
return;
}
void ext4_update_dynamic_rev(struct super_block *sb)
{
struct ext4_super_block *es = EXT4_SB(sb)->s_es;
if (le32_to_cpu(es->s_rev_level) > EXT4_GOOD_OLD_REV)
return;
ext4_warning(sb, __func__,
"updating to rev %d because of new feature flag, "
"running e2fsck is recommended",
EXT4_DYNAMIC_REV);
es->s_first_ino = cpu_to_le32(EXT4_GOOD_OLD_FIRST_INO);
es->s_inode_size = cpu_to_le16(EXT4_GOOD_OLD_INODE_SIZE);
es->s_rev_level = cpu_to_le32(EXT4_DYNAMIC_REV);
/* leave es->s_feature_*compat flags alone */
/* es->s_uuid will be set by e2fsck if empty */
/*
* The rest of the superblock fields should be zero, and if not it
* means they are likely already in use, so leave them alone. We
* can leave it up to e2fsck to clean up any inconsistencies there.
*/
}
/*
* Open the external journal device
*/
static struct block_device *ext4_blkdev_get(dev_t dev, struct super_block *sb)
{
struct block_device *bdev;
char b[BDEVNAME_SIZE];
bdev = open_by_devnum(dev, FMODE_READ|FMODE_WRITE);
if (IS_ERR(bdev))
goto fail;
return bdev;
fail:
ext4_msg(sb, KERN_ERR, "failed to open journal device %s: %ld",
__bdevname(dev, b), PTR_ERR(bdev));
return NULL;
}
/*
* Release the journal device
*/
static int ext4_blkdev_put(struct block_device *bdev)
{
bd_release(bdev);
return blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
}
static int ext4_blkdev_remove(struct ext4_sb_info *sbi)
{
struct block_device *bdev;
int ret = -ENODEV;
bdev = sbi->journal_bdev;
if (bdev) {
ret = ext4_blkdev_put(bdev);
sbi->journal_bdev = NULL;
}
return ret;
}
static inline struct inode *orphan_list_entry(struct list_head *l)
{
return &list_entry(l, struct ext4_inode_info, i_orphan)->vfs_inode;
}
static void dump_orphan_list(struct super_block *sb, struct ext4_sb_info *sbi)
{
struct list_head *l;
ext4_msg(sb, KERN_ERR, "sb orphan head is %d",
le32_to_cpu(sbi->s_es->s_last_orphan));
printk(KERN_ERR "sb_info orphan list:\n");
list_for_each(l, &sbi->s_orphan) {
struct inode *inode = orphan_list_entry(l);
printk(KERN_ERR " "
"inode %s:%lu at %p: mode %o, nlink %d, next %d\n",
inode->i_sb->s_id, inode->i_ino, inode,
inode->i_mode, inode->i_nlink,
NEXT_ORPHAN(inode));
}
}
static void ext4_put_super(struct super_block *sb)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es = sbi->s_es;
int i, err;
lock_super(sb);
lock_kernel();
if (sb->s_dirt)
ext4_commit_super(sb, 1);
ext4_release_system_zone(sb);
ext4_mb_release(sb);
ext4_ext_release(sb);
ext4_xattr_put_super(sb);
if (sbi->s_journal) {
err = jbd2_journal_destroy(sbi->s_journal);
sbi->s_journal = NULL;
if (err < 0)
ext4_abort(sb, __func__,
"Couldn't clean up the journal");
}
if (!(sb->s_flags & MS_RDONLY)) {
EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
es->s_state = cpu_to_le16(sbi->s_mount_state);
ext4_commit_super(sb, 1);
}
if (sbi->s_proc) {
remove_proc_entry(sb->s_id, ext4_proc_root);
}
kobject_del(&sbi->s_kobj);
for (i = 0; i < sbi->s_gdb_count; i++)
brelse(sbi->s_group_desc[i]);
kfree(sbi->s_group_desc);
if (is_vmalloc_addr(sbi->s_flex_groups))
vfree(sbi->s_flex_groups);
else
kfree(sbi->s_flex_groups);
percpu_counter_destroy(&sbi->s_freeblocks_counter);
percpu_counter_destroy(&sbi->s_freeinodes_counter);
percpu_counter_destroy(&sbi->s_dirs_counter);
percpu_counter_destroy(&sbi->s_dirtyblocks_counter);
brelse(sbi->s_sbh);
#ifdef CONFIG_QUOTA
for (i = 0; i < MAXQUOTAS; i++)
kfree(sbi->s_qf_names[i]);
#endif
/* Debugging code just in case the in-memory inode orphan list
* isn't empty. The on-disk one can be non-empty if we've
* detected an error and taken the fs readonly, but the
* in-memory list had better be clean by this point. */
if (!list_empty(&sbi->s_orphan))
dump_orphan_list(sb, sbi);
J_ASSERT(list_empty(&sbi->s_orphan));
invalidate_bdev(sb->s_bdev);
if (sbi->journal_bdev && sbi->journal_bdev != sb->s_bdev) {
/*
* Invalidate the journal device's buffers. We don't want them
* floating about in memory - the physical journal device may
* hotswapped, and it breaks the `ro-after' testing code.
*/
sync_blockdev(sbi->journal_bdev);
invalidate_bdev(sbi->journal_bdev);
ext4_blkdev_remove(sbi);
}
sb->s_fs_info = NULL;
/*
* Now that we are completely done shutting down the
* superblock, we need to actually destroy the kobject.
*/
unlock_kernel();
unlock_super(sb);
kobject_put(&sbi->s_kobj);
wait_for_completion(&sbi->s_kobj_unregister);
kfree(sbi->s_blockgroup_lock);
kfree(sbi);
}
static struct kmem_cache *ext4_inode_cachep;
/*
* Called inside transaction, so use GFP_NOFS
*/
static struct inode *ext4_alloc_inode(struct super_block *sb)
{
struct ext4_inode_info *ei;
ei = kmem_cache_alloc(ext4_inode_cachep, GFP_NOFS);
if (!ei)
return NULL;
ei->vfs_inode.i_version = 1;
ei->vfs_inode.i_data.writeback_index = 0;
memset(&ei->i_cached_extent, 0, sizeof(struct ext4_ext_cache));
INIT_LIST_HEAD(&ei->i_prealloc_list);
spin_lock_init(&ei->i_prealloc_lock);
/*
* Note: We can be called before EXT4_SB(sb)->s_journal is set,
* therefore it can be null here. Don't check it, just initialize
* jinode.
*/
jbd2_journal_init_jbd_inode(&ei->jinode, &ei->vfs_inode);
ei->i_reserved_data_blocks = 0;
ei->i_reserved_meta_blocks = 0;
ei->i_allocated_meta_blocks = 0;
ei->i_delalloc_reserved_flag = 0;
spin_lock_init(&(ei->i_block_reservation_lock));
return &ei->vfs_inode;
}
static void ext4_destroy_inode(struct inode *inode)
{
if (!list_empty(&(EXT4_I(inode)->i_orphan))) {
ext4_msg(inode->i_sb, KERN_ERR,
"Inode %lu (%p): orphan list check failed!",
inode->i_ino, EXT4_I(inode));
print_hex_dump(KERN_INFO, "", DUMP_PREFIX_ADDRESS, 16, 4,
EXT4_I(inode), sizeof(struct ext4_inode_info),
true);
dump_stack();
}
kmem_cache_free(ext4_inode_cachep, EXT4_I(inode));
}
static void init_once(void *foo)
{
struct ext4_inode_info *ei = (struct ext4_inode_info *) foo;
INIT_LIST_HEAD(&ei->i_orphan);
#ifdef CONFIG_EXT4_FS_XATTR
init_rwsem(&ei->xattr_sem);
#endif
init_rwsem(&ei->i_data_sem);
inode_init_once(&ei->vfs_inode);
}
static int init_inodecache(void)
{
ext4_inode_cachep = kmem_cache_create("ext4_inode_cache",
sizeof(struct ext4_inode_info),
0, (SLAB_RECLAIM_ACCOUNT|
SLAB_MEM_SPREAD),
init_once);
if (ext4_inode_cachep == NULL)
return -ENOMEM;
return 0;
}
static void destroy_inodecache(void)
{
kmem_cache_destroy(ext4_inode_cachep);
}
static void ext4_clear_inode(struct inode *inode)
{
ext4_discard_preallocations(inode);
if (EXT4_JOURNAL(inode))
jbd2_journal_release_jbd_inode(EXT4_SB(inode->i_sb)->s_journal,
&EXT4_I(inode)->jinode);
}
static inline void ext4_show_quota_options(struct seq_file *seq,
struct super_block *sb)
{
#if defined(CONFIG_QUOTA)
struct ext4_sb_info *sbi = EXT4_SB(sb);
if (sbi->s_jquota_fmt)
seq_printf(seq, ",jqfmt=%s",
(sbi->s_jquota_fmt == QFMT_VFS_OLD) ? "vfsold" : "vfsv0");
if (sbi->s_qf_names[USRQUOTA])
seq_printf(seq, ",usrjquota=%s", sbi->s_qf_names[USRQUOTA]);
if (sbi->s_qf_names[GRPQUOTA])
seq_printf(seq, ",grpjquota=%s", sbi->s_qf_names[GRPQUOTA]);
if (sbi->s_mount_opt & EXT4_MOUNT_USRQUOTA)
seq_puts(seq, ",usrquota");
if (sbi->s_mount_opt & EXT4_MOUNT_GRPQUOTA)
seq_puts(seq, ",grpquota");
#endif
}
/*
* Show an option if
* - it's set to a non-default value OR
* - if the per-sb default is different from the global default
*/
static int ext4_show_options(struct seq_file *seq, struct vfsmount *vfs)
{
int def_errors;
unsigned long def_mount_opts;
struct super_block *sb = vfs->mnt_sb;
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es = sbi->s_es;
def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
def_errors = le16_to_cpu(es->s_errors);
if (sbi->s_sb_block != 1)
seq_printf(seq, ",sb=%llu", sbi->s_sb_block);
if (test_opt(sb, MINIX_DF))
seq_puts(seq, ",minixdf");
if (test_opt(sb, GRPID) && !(def_mount_opts & EXT4_DEFM_BSDGROUPS))
seq_puts(seq, ",grpid");
if (!test_opt(sb, GRPID) && (def_mount_opts & EXT4_DEFM_BSDGROUPS))
seq_puts(seq, ",nogrpid");
if (sbi->s_resuid != EXT4_DEF_RESUID ||
le16_to_cpu(es->s_def_resuid) != EXT4_DEF_RESUID) {
seq_printf(seq, ",resuid=%u", sbi->s_resuid);
}
if (sbi->s_resgid != EXT4_DEF_RESGID ||
le16_to_cpu(es->s_def_resgid) != EXT4_DEF_RESGID) {
seq_printf(seq, ",resgid=%u", sbi->s_resgid);
}
if (test_opt(sb, ERRORS_RO)) {
if (def_errors == EXT4_ERRORS_PANIC ||
def_errors == EXT4_ERRORS_CONTINUE) {
seq_puts(seq, ",errors=remount-ro");
}
}
if (test_opt(sb, ERRORS_CONT) && def_errors != EXT4_ERRORS_CONTINUE)
seq_puts(seq, ",errors=continue");
if (test_opt(sb, ERRORS_PANIC) && def_errors != EXT4_ERRORS_PANIC)
seq_puts(seq, ",errors=panic");
if (test_opt(sb, NO_UID32) && !(def_mount_opts & EXT4_DEFM_UID16))
seq_puts(seq, ",nouid32");
if (test_opt(sb, DEBUG) && !(def_mount_opts & EXT4_DEFM_DEBUG))
seq_puts(seq, ",debug");
if (test_opt(sb, OLDALLOC))
seq_puts(seq, ",oldalloc");
#ifdef CONFIG_EXT4_FS_XATTR
if (test_opt(sb, XATTR_USER) &&
!(def_mount_opts & EXT4_DEFM_XATTR_USER))
seq_puts(seq, ",user_xattr");
if (!test_opt(sb, XATTR_USER) &&
(def_mount_opts & EXT4_DEFM_XATTR_USER)) {
seq_puts(seq, ",nouser_xattr");
}
#endif
#ifdef CONFIG_EXT4_FS_POSIX_ACL
if (test_opt(sb, POSIX_ACL) && !(def_mount_opts & EXT4_DEFM_ACL))
seq_puts(seq, ",acl");
if (!test_opt(sb, POSIX_ACL) && (def_mount_opts & EXT4_DEFM_ACL))
seq_puts(seq, ",noacl");
#endif
if (sbi->s_commit_interval != JBD2_DEFAULT_MAX_COMMIT_AGE*HZ) {
seq_printf(seq, ",commit=%u",
(unsigned) (sbi->s_commit_interval / HZ));
}
if (sbi->s_min_batch_time != EXT4_DEF_MIN_BATCH_TIME) {
seq_printf(seq, ",min_batch_time=%u",
(unsigned) sbi->s_min_batch_time);
}
if (sbi->s_max_batch_time != EXT4_DEF_MAX_BATCH_TIME) {
seq_printf(seq, ",max_batch_time=%u",
(unsigned) sbi->s_min_batch_time);
}
/*
* We're changing the default of barrier mount option, so
* let's always display its mount state so it's clear what its
* status is.
*/
seq_puts(seq, ",barrier=");
seq_puts(seq, test_opt(sb, BARRIER) ? "1" : "0");
if (test_opt(sb, JOURNAL_ASYNC_COMMIT))
seq_puts(seq, ",journal_async_commit");
if (test_opt(sb, NOBH))
seq_puts(seq, ",nobh");
if (test_opt(sb, I_VERSION))
seq_puts(seq, ",i_version");
if (!test_opt(sb, DELALLOC))
seq_puts(seq, ",nodelalloc");
if (sbi->s_stripe)
seq_printf(seq, ",stripe=%lu", sbi->s_stripe);
/*
* journal mode get enabled in different ways
* So just print the value even if we didn't specify it
*/
if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)
seq_puts(seq, ",data=journal");
else if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA)
seq_puts(seq, ",data=ordered");
else if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)
seq_puts(seq, ",data=writeback");
if (sbi->s_inode_readahead_blks != EXT4_DEF_INODE_READAHEAD_BLKS)
seq_printf(seq, ",inode_readahead_blks=%u",
sbi->s_inode_readahead_blks);
if (test_opt(sb, DATA_ERR_ABORT))
seq_puts(seq, ",data_err=abort");
if (test_opt(sb, NO_AUTO_DA_ALLOC))
seq_puts(seq, ",noauto_da_alloc");
ext4_show_quota_options(seq, sb);
return 0;
}
static struct inode *ext4_nfs_get_inode(struct super_block *sb,
u64 ino, u32 generation)
{
struct inode *inode;
if (ino < EXT4_FIRST_INO(sb) && ino != EXT4_ROOT_INO)
return ERR_PTR(-ESTALE);
if (ino > le32_to_cpu(EXT4_SB(sb)->s_es->s_inodes_count))
return ERR_PTR(-ESTALE);
/* iget isn't really right if the inode is currently unallocated!!
*
* ext4_read_inode will return a bad_inode if the inode had been
* deleted, so we should be safe.
*
* Currently we don't know the generation for parent directory, so
* a generation of 0 means "accept any"
*/
inode = ext4_iget(sb, ino);
if (IS_ERR(inode))
return ERR_CAST(inode);
if (generation && inode->i_generation != generation) {
iput(inode);
return ERR_PTR(-ESTALE);
}
return inode;
}
static struct dentry *ext4_fh_to_dentry(struct super_block *sb, struct fid *fid,
int fh_len, int fh_type)
{
return generic_fh_to_dentry(sb, fid, fh_len, fh_type,
ext4_nfs_get_inode);
}
static struct dentry *ext4_fh_to_parent(struct super_block *sb, struct fid *fid,
int fh_len, int fh_type)
{
return generic_fh_to_parent(sb, fid, fh_len, fh_type,
ext4_nfs_get_inode);
}
/*
* Try to release metadata pages (indirect blocks, directories) which are
* mapped via the block device. Since these pages could have journal heads
* which would prevent try_to_free_buffers() from freeing them, we must use
* jbd2 layer's try_to_free_buffers() function to release them.
*/
static int bdev_try_to_free_page(struct super_block *sb, struct page *page,
gfp_t wait)
{
journal_t *journal = EXT4_SB(sb)->s_journal;
WARN_ON(PageChecked(page));
if (!page_has_buffers(page))
return 0;
if (journal)
return jbd2_journal_try_to_free_buffers(journal, page,
wait & ~__GFP_WAIT);
return try_to_free_buffers(page);
}
#ifdef CONFIG_QUOTA
#define QTYPE2NAME(t) ((t) == USRQUOTA ? "user" : "group")
#define QTYPE2MOPT(on, t) ((t) == USRQUOTA?((on)##USRJQUOTA):((on)##GRPJQUOTA))
static int ext4_write_dquot(struct dquot *dquot);
static int ext4_acquire_dquot(struct dquot *dquot);
static int ext4_release_dquot(struct dquot *dquot);
static int ext4_mark_dquot_dirty(struct dquot *dquot);
static int ext4_write_info(struct super_block *sb, int type);
static int ext4_quota_on(struct super_block *sb, int type, int format_id,
char *path, int remount);
static int ext4_quota_on_mount(struct super_block *sb, int type);
static ssize_t ext4_quota_read(struct super_block *sb, int type, char *data,
size_t len, loff_t off);
static ssize_t ext4_quota_write(struct super_block *sb, int type,
const char *data, size_t len, loff_t off);
static struct dquot_operations ext4_quota_operations = {
.initialize = dquot_initialize,
.drop = dquot_drop,
.alloc_space = dquot_alloc_space,
.reserve_space = dquot_reserve_space,
.claim_space = dquot_claim_space,
.release_rsv = dquot_release_reserved_space,
.get_reserved_space = ext4_get_reserved_space,
.alloc_inode = dquot_alloc_inode,
.free_space = dquot_free_space,
.free_inode = dquot_free_inode,
.transfer = dquot_transfer,
.write_dquot = ext4_write_dquot,
.acquire_dquot = ext4_acquire_dquot,
.release_dquot = ext4_release_dquot,
.mark_dirty = ext4_mark_dquot_dirty,
.write_info = ext4_write_info,
.alloc_dquot = dquot_alloc,
.destroy_dquot = dquot_destroy,
};
static struct quotactl_ops ext4_qctl_operations = {
.quota_on = ext4_quota_on,
.quota_off = vfs_quota_off,
.quota_sync = vfs_quota_sync,
.get_info = vfs_get_dqinfo,
.set_info = vfs_set_dqinfo,
.get_dqblk = vfs_get_dqblk,
.set_dqblk = vfs_set_dqblk
};
#endif
static const struct super_operations ext4_sops = {
.alloc_inode = ext4_alloc_inode,
.destroy_inode = ext4_destroy_inode,
.write_inode = ext4_write_inode,
.dirty_inode = ext4_dirty_inode,
.delete_inode = ext4_delete_inode,
.put_super = ext4_put_super,
.sync_fs = ext4_sync_fs,
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 03:40:58 +03:00
.freeze_fs = ext4_freeze,
.unfreeze_fs = ext4_unfreeze,
.statfs = ext4_statfs,
.remount_fs = ext4_remount,
.clear_inode = ext4_clear_inode,
.show_options = ext4_show_options,
#ifdef CONFIG_QUOTA
.quota_read = ext4_quota_read,
.quota_write = ext4_quota_write,
#endif
.bdev_try_to_free_page = bdev_try_to_free_page,
};
static const struct super_operations ext4_nojournal_sops = {
.alloc_inode = ext4_alloc_inode,
.destroy_inode = ext4_destroy_inode,
.write_inode = ext4_write_inode,
.dirty_inode = ext4_dirty_inode,
.delete_inode = ext4_delete_inode,
.write_super = ext4_write_super,
.put_super = ext4_put_super,
.statfs = ext4_statfs,
.remount_fs = ext4_remount,
.clear_inode = ext4_clear_inode,
.show_options = ext4_show_options,
#ifdef CONFIG_QUOTA
.quota_read = ext4_quota_read,
.quota_write = ext4_quota_write,
#endif
.bdev_try_to_free_page = bdev_try_to_free_page,
};
static const struct export_operations ext4_export_ops = {
.fh_to_dentry = ext4_fh_to_dentry,
.fh_to_parent = ext4_fh_to_parent,
.get_parent = ext4_get_parent,
};
enum {
Opt_bsd_df, Opt_minix_df, Opt_grpid, Opt_nogrpid,
Opt_resgid, Opt_resuid, Opt_sb, Opt_err_cont, Opt_err_panic, Opt_err_ro,
Opt_nouid32, Opt_debug, Opt_oldalloc, Opt_orlov,
Opt_user_xattr, Opt_nouser_xattr, Opt_acl, Opt_noacl,
Opt_auto_da_alloc, Opt_noauto_da_alloc, Opt_noload, Opt_nobh, Opt_bh,
Opt_commit, Opt_min_batch_time, Opt_max_batch_time,
Opt_journal_update, Opt_journal_dev,
Opt_journal_checksum, Opt_journal_async_commit,
Opt_abort, Opt_data_journal, Opt_data_ordered, Opt_data_writeback,
Opt_data_err_abort, Opt_data_err_ignore, Opt_mb_history_length,
Opt_usrjquota, Opt_grpjquota, Opt_offusrjquota, Opt_offgrpjquota,
Opt_jqfmt_vfsold, Opt_jqfmt_vfsv0, Opt_quota, Opt_noquota,
Opt_ignore, Opt_barrier, Opt_nobarrier, Opt_err, Opt_resize,
Opt_usrquota, Opt_grpquota, Opt_i_version,
Opt_stripe, Opt_delalloc, Opt_nodelalloc,
Opt_block_validity, Opt_noblock_validity,
Opt_inode_readahead_blks, Opt_journal_ioprio
};
static const match_table_t tokens = {
{Opt_bsd_df, "bsddf"},
{Opt_minix_df, "minixdf"},
{Opt_grpid, "grpid"},
{Opt_grpid, "bsdgroups"},
{Opt_nogrpid, "nogrpid"},
{Opt_nogrpid, "sysvgroups"},
{Opt_resgid, "resgid=%u"},
{Opt_resuid, "resuid=%u"},
{Opt_sb, "sb=%u"},
{Opt_err_cont, "errors=continue"},
{Opt_err_panic, "errors=panic"},
{Opt_err_ro, "errors=remount-ro"},
{Opt_nouid32, "nouid32"},
{Opt_debug, "debug"},
{Opt_oldalloc, "oldalloc"},
{Opt_orlov, "orlov"},
{Opt_user_xattr, "user_xattr"},
{Opt_nouser_xattr, "nouser_xattr"},
{Opt_acl, "acl"},
{Opt_noacl, "noacl"},
{Opt_noload, "noload"},
{Opt_nobh, "nobh"},
{Opt_bh, "bh"},
{Opt_commit, "commit=%u"},
{Opt_min_batch_time, "min_batch_time=%u"},
{Opt_max_batch_time, "max_batch_time=%u"},
{Opt_journal_update, "journal=update"},
{Opt_journal_dev, "journal_dev=%u"},
{Opt_journal_checksum, "journal_checksum"},
{Opt_journal_async_commit, "journal_async_commit"},
{Opt_abort, "abort"},
{Opt_data_journal, "data=journal"},
{Opt_data_ordered, "data=ordered"},
{Opt_data_writeback, "data=writeback"},
{Opt_data_err_abort, "data_err=abort"},
{Opt_data_err_ignore, "data_err=ignore"},
{Opt_mb_history_length, "mb_history_length=%u"},
{Opt_offusrjquota, "usrjquota="},
{Opt_usrjquota, "usrjquota=%s"},
{Opt_offgrpjquota, "grpjquota="},
{Opt_grpjquota, "grpjquota=%s"},
{Opt_jqfmt_vfsold, "jqfmt=vfsold"},
{Opt_jqfmt_vfsv0, "jqfmt=vfsv0"},
{Opt_grpquota, "grpquota"},
{Opt_noquota, "noquota"},
{Opt_quota, "quota"},
{Opt_usrquota, "usrquota"},
{Opt_barrier, "barrier=%u"},
{Opt_barrier, "barrier"},
{Opt_nobarrier, "nobarrier"},
{Opt_i_version, "i_version"},
{Opt_stripe, "stripe=%u"},
{Opt_resize, "resize"},
{Opt_delalloc, "delalloc"},
{Opt_nodelalloc, "nodelalloc"},
{Opt_block_validity, "block_validity"},
{Opt_noblock_validity, "noblock_validity"},
{Opt_inode_readahead_blks, "inode_readahead_blks=%u"},
{Opt_journal_ioprio, "journal_ioprio=%u"},
{Opt_auto_da_alloc, "auto_da_alloc=%u"},
{Opt_auto_da_alloc, "auto_da_alloc"},
{Opt_noauto_da_alloc, "noauto_da_alloc"},
{Opt_err, NULL},
};
static ext4_fsblk_t get_sb_block(void **data)
{
ext4_fsblk_t sb_block;
char *options = (char *) *data;
if (!options || strncmp(options, "sb=", 3) != 0)
return 1; /* Default location */
options += 3;
/* TODO: use simple_strtoll with >32bit ext4 */
sb_block = simple_strtoul(options, &options, 0);
if (*options && *options != ',') {
printk(KERN_ERR "EXT4-fs: Invalid sb specification: %s\n",
(char *) *data);
return 1;
}
if (*options == ',')
options++;
*data = (void *) options;
return sb_block;
}
#define DEFAULT_JOURNAL_IOPRIO (IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE, 3))
static int parse_options(char *options, struct super_block *sb,
unsigned long *journal_devnum,
unsigned int *journal_ioprio,
ext4_fsblk_t *n_blocks_count, int is_remount)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
char *p;
substring_t args[MAX_OPT_ARGS];
int data_opt = 0;
int option;
#ifdef CONFIG_QUOTA
int qtype, qfmt;
char *qname;
#endif
if (!options)
return 1;
while ((p = strsep(&options, ",")) != NULL) {
int token;
if (!*p)
continue;
token = match_token(p, tokens, args);
switch (token) {
case Opt_bsd_df:
clear_opt(sbi->s_mount_opt, MINIX_DF);
break;
case Opt_minix_df:
set_opt(sbi->s_mount_opt, MINIX_DF);
break;
case Opt_grpid:
set_opt(sbi->s_mount_opt, GRPID);
break;
case Opt_nogrpid:
clear_opt(sbi->s_mount_opt, GRPID);
break;
case Opt_resuid:
if (match_int(&args[0], &option))
return 0;
sbi->s_resuid = option;
break;
case Opt_resgid:
if (match_int(&args[0], &option))
return 0;
sbi->s_resgid = option;
break;
case Opt_sb:
/* handled by get_sb_block() instead of here */
/* *sb_block = match_int(&args[0]); */
break;
case Opt_err_panic:
clear_opt(sbi->s_mount_opt, ERRORS_CONT);
clear_opt(sbi->s_mount_opt, ERRORS_RO);
set_opt(sbi->s_mount_opt, ERRORS_PANIC);
break;
case Opt_err_ro:
clear_opt(sbi->s_mount_opt, ERRORS_CONT);
clear_opt(sbi->s_mount_opt, ERRORS_PANIC);
set_opt(sbi->s_mount_opt, ERRORS_RO);
break;
case Opt_err_cont:
clear_opt(sbi->s_mount_opt, ERRORS_RO);
clear_opt(sbi->s_mount_opt, ERRORS_PANIC);
set_opt(sbi->s_mount_opt, ERRORS_CONT);
break;
case Opt_nouid32:
set_opt(sbi->s_mount_opt, NO_UID32);
break;
case Opt_debug:
set_opt(sbi->s_mount_opt, DEBUG);
break;
case Opt_oldalloc:
set_opt(sbi->s_mount_opt, OLDALLOC);
break;
case Opt_orlov:
clear_opt(sbi->s_mount_opt, OLDALLOC);
break;
#ifdef CONFIG_EXT4_FS_XATTR
case Opt_user_xattr:
set_opt(sbi->s_mount_opt, XATTR_USER);
break;
case Opt_nouser_xattr:
clear_opt(sbi->s_mount_opt, XATTR_USER);
break;
#else
case Opt_user_xattr:
case Opt_nouser_xattr:
ext4_msg(sb, KERN_ERR, "(no)user_xattr options not supported");
break;
#endif
#ifdef CONFIG_EXT4_FS_POSIX_ACL
case Opt_acl:
set_opt(sbi->s_mount_opt, POSIX_ACL);
break;
case Opt_noacl:
clear_opt(sbi->s_mount_opt, POSIX_ACL);
break;
#else
case Opt_acl:
case Opt_noacl:
ext4_msg(sb, KERN_ERR, "(no)acl options not supported");
break;
#endif
case Opt_journal_update:
/* @@@ FIXME */
/* Eventually we will want to be able to create
a journal file here. For now, only allow the
user to specify an existing inode to be the
journal file. */
if (is_remount) {
ext4_msg(sb, KERN_ERR,
"Cannot specify journal on remount");
return 0;
}
set_opt(sbi->s_mount_opt, UPDATE_JOURNAL);
break;
case Opt_journal_dev:
if (is_remount) {
ext4_msg(sb, KERN_ERR,
"Cannot specify journal on remount");
return 0;
}
if (match_int(&args[0], &option))
return 0;
*journal_devnum = option;
break;
case Opt_journal_checksum:
break; /* Kept for backwards compatibility */
case Opt_journal_async_commit:
set_opt(sbi->s_mount_opt, JOURNAL_ASYNC_COMMIT);
break;
case Opt_noload:
set_opt(sbi->s_mount_opt, NOLOAD);
break;
case Opt_commit:
if (match_int(&args[0], &option))
return 0;
if (option < 0)
return 0;
if (option == 0)
option = JBD2_DEFAULT_MAX_COMMIT_AGE;
sbi->s_commit_interval = HZ * option;
break;
case Opt_max_batch_time:
if (match_int(&args[0], &option))
return 0;
if (option < 0)
return 0;
if (option == 0)
option = EXT4_DEF_MAX_BATCH_TIME;
sbi->s_max_batch_time = option;
break;
case Opt_min_batch_time:
if (match_int(&args[0], &option))
return 0;
if (option < 0)
return 0;
sbi->s_min_batch_time = option;
break;
case Opt_data_journal:
data_opt = EXT4_MOUNT_JOURNAL_DATA;
goto datacheck;
case Opt_data_ordered:
data_opt = EXT4_MOUNT_ORDERED_DATA;
goto datacheck;
case Opt_data_writeback:
data_opt = EXT4_MOUNT_WRITEBACK_DATA;
datacheck:
if (is_remount) {
if ((sbi->s_mount_opt & EXT4_MOUNT_DATA_FLAGS)
!= data_opt) {
ext4_msg(sb, KERN_ERR,
"Cannot change data mode on remount");
return 0;
}
} else {
sbi->s_mount_opt &= ~EXT4_MOUNT_DATA_FLAGS;
sbi->s_mount_opt |= data_opt;
}
break;
case Opt_data_err_abort:
set_opt(sbi->s_mount_opt, DATA_ERR_ABORT);
break;
case Opt_data_err_ignore:
clear_opt(sbi->s_mount_opt, DATA_ERR_ABORT);
break;
case Opt_mb_history_length:
if (match_int(&args[0], &option))
return 0;
if (option < 0)
return 0;
sbi->s_mb_history_max = option;
break;
#ifdef CONFIG_QUOTA
case Opt_usrjquota:
qtype = USRQUOTA;
goto set_qf_name;
case Opt_grpjquota:
qtype = GRPQUOTA;
set_qf_name:
if (sb_any_quota_loaded(sb) &&
!sbi->s_qf_names[qtype]) {
ext4_msg(sb, KERN_ERR,
"Cannot change journaled "
"quota options when quota turned on");
return 0;
}
qname = match_strdup(&args[0]);
if (!qname) {
ext4_msg(sb, KERN_ERR,
"Not enough memory for "
"storing quotafile name");
return 0;
}
if (sbi->s_qf_names[qtype] &&
strcmp(sbi->s_qf_names[qtype], qname)) {
ext4_msg(sb, KERN_ERR,
"%s quota file already "
"specified", QTYPE2NAME(qtype));
kfree(qname);
return 0;
}
sbi->s_qf_names[qtype] = qname;
if (strchr(sbi->s_qf_names[qtype], '/')) {
ext4_msg(sb, KERN_ERR,
"quotafile must be on "
"filesystem root");
kfree(sbi->s_qf_names[qtype]);
sbi->s_qf_names[qtype] = NULL;
return 0;
}
set_opt(sbi->s_mount_opt, QUOTA);
break;
case Opt_offusrjquota:
qtype = USRQUOTA;
goto clear_qf_name;
case Opt_offgrpjquota:
qtype = GRPQUOTA;
clear_qf_name:
if (sb_any_quota_loaded(sb) &&
sbi->s_qf_names[qtype]) {
ext4_msg(sb, KERN_ERR, "Cannot change "
"journaled quota options when "
"quota turned on");
return 0;
}
/*
* The space will be released later when all options
* are confirmed to be correct
*/
sbi->s_qf_names[qtype] = NULL;
break;
case Opt_jqfmt_vfsold:
qfmt = QFMT_VFS_OLD;
goto set_qf_format;
case Opt_jqfmt_vfsv0:
qfmt = QFMT_VFS_V0;
set_qf_format:
if (sb_any_quota_loaded(sb) &&
sbi->s_jquota_fmt != qfmt) {
ext4_msg(sb, KERN_ERR, "Cannot change "
"journaled quota options when "
"quota turned on");
return 0;
}
sbi->s_jquota_fmt = qfmt;
break;
case Opt_quota:
case Opt_usrquota:
set_opt(sbi->s_mount_opt, QUOTA);
set_opt(sbi->s_mount_opt, USRQUOTA);
break;
case Opt_grpquota:
set_opt(sbi->s_mount_opt, QUOTA);
set_opt(sbi->s_mount_opt, GRPQUOTA);
break;
case Opt_noquota:
if (sb_any_quota_loaded(sb)) {
ext4_msg(sb, KERN_ERR, "Cannot change quota "
"options when quota turned on");
return 0;
}
clear_opt(sbi->s_mount_opt, QUOTA);
clear_opt(sbi->s_mount_opt, USRQUOTA);
clear_opt(sbi->s_mount_opt, GRPQUOTA);
break;
#else
case Opt_quota:
case Opt_usrquota:
case Opt_grpquota:
ext4_msg(sb, KERN_ERR,
"quota options not supported");
break;
case Opt_usrjquota:
case Opt_grpjquota:
case Opt_offusrjquota:
case Opt_offgrpjquota:
case Opt_jqfmt_vfsold:
case Opt_jqfmt_vfsv0:
ext4_msg(sb, KERN_ERR,
"journaled quota options not supported");
break;
case Opt_noquota:
break;
#endif
case Opt_abort:
sbi->s_mount_flags |= EXT4_MF_FS_ABORTED;
break;
case Opt_nobarrier:
clear_opt(sbi->s_mount_opt, BARRIER);
break;
case Opt_barrier:
if (match_int(&args[0], &option)) {
set_opt(sbi->s_mount_opt, BARRIER);
break;
}
if (option)
set_opt(sbi->s_mount_opt, BARRIER);
else
clear_opt(sbi->s_mount_opt, BARRIER);
break;
case Opt_ignore:
break;
case Opt_resize:
if (!is_remount) {
ext4_msg(sb, KERN_ERR,
"resize option only available "
"for remount");
return 0;
}
if (match_int(&args[0], &option) != 0)
return 0;
*n_blocks_count = option;
break;
case Opt_nobh:
set_opt(sbi->s_mount_opt, NOBH);
break;
case Opt_bh:
clear_opt(sbi->s_mount_opt, NOBH);
break;
case Opt_i_version:
set_opt(sbi->s_mount_opt, I_VERSION);
sb->s_flags |= MS_I_VERSION;
break;
case Opt_nodelalloc:
clear_opt(sbi->s_mount_opt, DELALLOC);
break;
case Opt_stripe:
if (match_int(&args[0], &option))
return 0;
if (option < 0)
return 0;
sbi->s_stripe = option;
break;
case Opt_delalloc:
set_opt(sbi->s_mount_opt, DELALLOC);
break;
case Opt_block_validity:
set_opt(sbi->s_mount_opt, BLOCK_VALIDITY);
break;
case Opt_noblock_validity:
clear_opt(sbi->s_mount_opt, BLOCK_VALIDITY);
break;
case Opt_inode_readahead_blks:
if (match_int(&args[0], &option))
return 0;
if (option < 0 || option > (1 << 30))
return 0;
if (!is_power_of_2(option)) {
ext4_msg(sb, KERN_ERR,
"EXT4-fs: inode_readahead_blks"
" must be a power of 2");
return 0;
}
sbi->s_inode_readahead_blks = option;
break;
case Opt_journal_ioprio:
if (match_int(&args[0], &option))
return 0;
if (option < 0 || option > 7)
break;
*journal_ioprio = IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE,
option);
break;
case Opt_noauto_da_alloc:
set_opt(sbi->s_mount_opt,NO_AUTO_DA_ALLOC);
break;
case Opt_auto_da_alloc:
if (match_int(&args[0], &option)) {
clear_opt(sbi->s_mount_opt, NO_AUTO_DA_ALLOC);
break;
}
if (option)
clear_opt(sbi->s_mount_opt, NO_AUTO_DA_ALLOC);
else
set_opt(sbi->s_mount_opt,NO_AUTO_DA_ALLOC);
break;
default:
ext4_msg(sb, KERN_ERR,
"Unrecognized mount option \"%s\" "
"or missing value", p);
return 0;
}
}
#ifdef CONFIG_QUOTA
if (sbi->s_qf_names[USRQUOTA] || sbi->s_qf_names[GRPQUOTA]) {
if ((sbi->s_mount_opt & EXT4_MOUNT_USRQUOTA) &&
sbi->s_qf_names[USRQUOTA])
clear_opt(sbi->s_mount_opt, USRQUOTA);
if ((sbi->s_mount_opt & EXT4_MOUNT_GRPQUOTA) &&
sbi->s_qf_names[GRPQUOTA])
clear_opt(sbi->s_mount_opt, GRPQUOTA);
if ((sbi->s_qf_names[USRQUOTA] &&
(sbi->s_mount_opt & EXT4_MOUNT_GRPQUOTA)) ||
(sbi->s_qf_names[GRPQUOTA] &&
(sbi->s_mount_opt & EXT4_MOUNT_USRQUOTA))) {
ext4_msg(sb, KERN_ERR, "old and new quota "
"format mixing");
return 0;
}
if (!sbi->s_jquota_fmt) {
ext4_msg(sb, KERN_ERR, "journaled quota format "
"not specified");
return 0;
}
} else {
if (sbi->s_jquota_fmt) {
ext4_msg(sb, KERN_ERR, "journaled quota format "
"specified with no journaling "
"enabled");
return 0;
}
}
#endif
return 1;
}
static int ext4_setup_super(struct super_block *sb, struct ext4_super_block *es,
int read_only)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
int res = 0;
if (le32_to_cpu(es->s_rev_level) > EXT4_MAX_SUPP_REV) {
ext4_msg(sb, KERN_ERR, "revision level too high, "
"forcing read-only mode");
res = MS_RDONLY;
}
if (read_only)
return res;
if (!(sbi->s_mount_state & EXT4_VALID_FS))
ext4_msg(sb, KERN_WARNING, "warning: mounting unchecked fs, "
"running e2fsck is recommended");
else if ((sbi->s_mount_state & EXT4_ERROR_FS))
ext4_msg(sb, KERN_WARNING,
"warning: mounting fs with errors, "
"running e2fsck is recommended");
else if ((__s16) le16_to_cpu(es->s_max_mnt_count) >= 0 &&
le16_to_cpu(es->s_mnt_count) >=
(unsigned short) (__s16) le16_to_cpu(es->s_max_mnt_count))
ext4_msg(sb, KERN_WARNING,
"warning: maximal mount count reached, "
"running e2fsck is recommended");
else if (le32_to_cpu(es->s_checkinterval) &&
(le32_to_cpu(es->s_lastcheck) +
le32_to_cpu(es->s_checkinterval) <= get_seconds()))
ext4_msg(sb, KERN_WARNING,
"warning: checktime reached, "
"running e2fsck is recommended");
if (!sbi->s_journal)
es->s_state &= cpu_to_le16(~EXT4_VALID_FS);
if (!(__s16) le16_to_cpu(es->s_max_mnt_count))
es->s_max_mnt_count = cpu_to_le16(EXT4_DFL_MAX_MNT_COUNT);
le16_add_cpu(&es->s_mnt_count, 1);
es->s_mtime = cpu_to_le32(get_seconds());
ext4_update_dynamic_rev(sb);
if (sbi->s_journal)
EXT4_SET_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
ext4_commit_super(sb, 1);
if (test_opt(sb, DEBUG))
printk(KERN_INFO "[EXT4 FS bs=%lu, gc=%u, "
"bpg=%lu, ipg=%lu, mo=%04x]\n",
sb->s_blocksize,
sbi->s_groups_count,
EXT4_BLOCKS_PER_GROUP(sb),
EXT4_INODES_PER_GROUP(sb),
sbi->s_mount_opt);
if (EXT4_SB(sb)->s_journal) {
ext4_msg(sb, KERN_INFO, "%s journal on %s",
EXT4_SB(sb)->s_journal->j_inode ? "internal" :
"external", EXT4_SB(sb)->s_journal->j_devname);
} else {
ext4_msg(sb, KERN_INFO, "no journal");
}
return res;
}
static int ext4_fill_flex_info(struct super_block *sb)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_group_desc *gdp = NULL;
ext4_group_t flex_group_count;
ext4_group_t flex_group;
int groups_per_flex = 0;
size_t size;
int i;
if (!sbi->s_es->s_log_groups_per_flex) {
sbi->s_log_groups_per_flex = 0;
return 1;
}
sbi->s_log_groups_per_flex = sbi->s_es->s_log_groups_per_flex;
groups_per_flex = 1 << sbi->s_log_groups_per_flex;
/* We allocate both existing and potentially added groups */
flex_group_count = ((sbi->s_groups_count + groups_per_flex - 1) +
((le16_to_cpu(sbi->s_es->s_reserved_gdt_blocks) + 1) <<
EXT4_DESC_PER_BLOCK_BITS(sb))) / groups_per_flex;
size = flex_group_count * sizeof(struct flex_groups);
sbi->s_flex_groups = kzalloc(size, GFP_KERNEL);
if (sbi->s_flex_groups == NULL) {
sbi->s_flex_groups = vmalloc(size);
if (sbi->s_flex_groups)
memset(sbi->s_flex_groups, 0, size);
}
if (sbi->s_flex_groups == NULL) {
ext4_msg(sb, KERN_ERR, "not enough memory for "
"%u flex groups", flex_group_count);
goto failed;
}
for (i = 0; i < sbi->s_groups_count; i++) {
gdp = ext4_get_group_desc(sb, i, NULL);
flex_group = ext4_flex_group(sbi, i);
atomic_add(ext4_free_inodes_count(sb, gdp),
&sbi->s_flex_groups[flex_group].free_inodes);
atomic_add(ext4_free_blks_count(sb, gdp),
&sbi->s_flex_groups[flex_group].free_blocks);
atomic_add(ext4_used_dirs_count(sb, gdp),
&sbi->s_flex_groups[flex_group].used_dirs);
}
return 1;
failed:
return 0;
}
Ext4: Uninitialized Block Groups In pass1 of e2fsck, every inode table in the fileystem is scanned and checked, regardless of whether it is in use. This is this the most time consuming part of the filesystem check. The unintialized block group feature can greatly reduce e2fsck time by eliminating checking of uninitialized inodes. With this feature, there is a a high water mark of used inodes for each block group. Block and inode bitmaps can be uninitialized on disk via a flag in the group descriptor to avoid reading or scanning them at e2fsck time. A checksum of each group descriptor is used to ensure that corruption in the group descriptor's bit flags does not cause incorrect operation. The feature is enabled through a mkfs option mke2fs /dev/ -O uninit_groups A patch adding support for uninitialized block groups to e2fsprogs tools has been posted to the linux-ext4 mailing list. The patches have been stress tested with fsstress and fsx. In performance tests testing e2fsck time, we have seen that e2fsck time on ext3 grows linearly with the total number of inodes in the filesytem. In ext4 with the uninitialized block groups feature, the e2fsck time is constant, based solely on the number of used inodes rather than the total inode count. Since typical ext4 filesystems only use 1-10% of their inodes, this feature can greatly reduce e2fsck time for users. With performance improvement of 2-20 times, depending on how full the filesystem is. The attached graph shows the major improvements in e2fsck times in filesystems with a large total inode count, but few inodes in use. In each group descriptor if we have EXT4_BG_INODE_UNINIT set in bg_flags: Inode table is not initialized/used in this group. So we can skip the consistency check during fsck. EXT4_BG_BLOCK_UNINIT set in bg_flags: No block in the group is used. So we can skip the block bitmap verification for this group. We also add two new fields to group descriptor as a part of uninitialized group patch. __le16 bg_itable_unused; /* Unused inodes count */ __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */ bg_itable_unused: If we have EXT4_BG_INODE_UNINIT not set in bg_flags then bg_itable_unused will give the offset within the inode table till the inodes are used. This can be used by fsck to skip list of inodes that are marked unused. bg_checksum: Now that we depend on bg_flags and bg_itable_unused to determine the block and inode usage, we need to make sure group descriptor is not corrupt. We add checksum to group descriptor to detect corruption. If the descriptor is found to be corrupt, we mark all the blocks and inodes in the group used. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-17 02:38:25 +04:00
__le16 ext4_group_desc_csum(struct ext4_sb_info *sbi, __u32 block_group,
struct ext4_group_desc *gdp)
{
__u16 crc = 0;
if (sbi->s_es->s_feature_ro_compat &
cpu_to_le32(EXT4_FEATURE_RO_COMPAT_GDT_CSUM)) {
int offset = offsetof(struct ext4_group_desc, bg_checksum);
__le32 le_group = cpu_to_le32(block_group);
crc = crc16(~0, sbi->s_es->s_uuid, sizeof(sbi->s_es->s_uuid));
crc = crc16(crc, (__u8 *)&le_group, sizeof(le_group));
crc = crc16(crc, (__u8 *)gdp, offset);
offset += sizeof(gdp->bg_checksum); /* skip checksum */
/* for checksum of struct ext4_group_desc do the rest...*/
if ((sbi->s_es->s_feature_incompat &
cpu_to_le32(EXT4_FEATURE_INCOMPAT_64BIT)) &&
offset < le16_to_cpu(sbi->s_es->s_desc_size))
crc = crc16(crc, (__u8 *)gdp + offset,
le16_to_cpu(sbi->s_es->s_desc_size) -
offset);
}
return cpu_to_le16(crc);
}
int ext4_group_desc_csum_verify(struct ext4_sb_info *sbi, __u32 block_group,
struct ext4_group_desc *gdp)
{
if ((sbi->s_es->s_feature_ro_compat &
cpu_to_le32(EXT4_FEATURE_RO_COMPAT_GDT_CSUM)) &&
(gdp->bg_checksum != ext4_group_desc_csum(sbi, block_group, gdp)))
return 0;
return 1;
}
/* Called at mount-time, super-block is locked */
static int ext4_check_descriptors(struct super_block *sb)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
ext4_fsblk_t first_block = le32_to_cpu(sbi->s_es->s_first_data_block);
ext4_fsblk_t last_block;
ext4_fsblk_t block_bitmap;
ext4_fsblk_t inode_bitmap;
ext4_fsblk_t inode_table;
int flexbg_flag = 0;
ext4_group_t i;
if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG))
flexbg_flag = 1;
ext4_debug("Checking group descriptors");
for (i = 0; i < sbi->s_groups_count; i++) {
struct ext4_group_desc *gdp = ext4_get_group_desc(sb, i, NULL);
if (i == sbi->s_groups_count - 1 || flexbg_flag)
last_block = ext4_blocks_count(sbi->s_es) - 1;
else
last_block = first_block +
(EXT4_BLOCKS_PER_GROUP(sb) - 1);
block_bitmap = ext4_block_bitmap(sb, gdp);
if (block_bitmap < first_block || block_bitmap > last_block) {
ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
"Block bitmap for group %u not in group "
"(block %llu)!", i, block_bitmap);
return 0;
}
inode_bitmap = ext4_inode_bitmap(sb, gdp);
if (inode_bitmap < first_block || inode_bitmap > last_block) {
ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
"Inode bitmap for group %u not in group "
"(block %llu)!", i, inode_bitmap);
return 0;
}
inode_table = ext4_inode_table(sb, gdp);
if (inode_table < first_block ||
inode_table + sbi->s_itb_per_group - 1 > last_block) {
ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
"Inode table for group %u not in group "
"(block %llu)!", i, inode_table);
return 0;
}
ext4_lock_group(sb, i);
Ext4: Uninitialized Block Groups In pass1 of e2fsck, every inode table in the fileystem is scanned and checked, regardless of whether it is in use. This is this the most time consuming part of the filesystem check. The unintialized block group feature can greatly reduce e2fsck time by eliminating checking of uninitialized inodes. With this feature, there is a a high water mark of used inodes for each block group. Block and inode bitmaps can be uninitialized on disk via a flag in the group descriptor to avoid reading or scanning them at e2fsck time. A checksum of each group descriptor is used to ensure that corruption in the group descriptor's bit flags does not cause incorrect operation. The feature is enabled through a mkfs option mke2fs /dev/ -O uninit_groups A patch adding support for uninitialized block groups to e2fsprogs tools has been posted to the linux-ext4 mailing list. The patches have been stress tested with fsstress and fsx. In performance tests testing e2fsck time, we have seen that e2fsck time on ext3 grows linearly with the total number of inodes in the filesytem. In ext4 with the uninitialized block groups feature, the e2fsck time is constant, based solely on the number of used inodes rather than the total inode count. Since typical ext4 filesystems only use 1-10% of their inodes, this feature can greatly reduce e2fsck time for users. With performance improvement of 2-20 times, depending on how full the filesystem is. The attached graph shows the major improvements in e2fsck times in filesystems with a large total inode count, but few inodes in use. In each group descriptor if we have EXT4_BG_INODE_UNINIT set in bg_flags: Inode table is not initialized/used in this group. So we can skip the consistency check during fsck. EXT4_BG_BLOCK_UNINIT set in bg_flags: No block in the group is used. So we can skip the block bitmap verification for this group. We also add two new fields to group descriptor as a part of uninitialized group patch. __le16 bg_itable_unused; /* Unused inodes count */ __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */ bg_itable_unused: If we have EXT4_BG_INODE_UNINIT not set in bg_flags then bg_itable_unused will give the offset within the inode table till the inodes are used. This can be used by fsck to skip list of inodes that are marked unused. bg_checksum: Now that we depend on bg_flags and bg_itable_unused to determine the block and inode usage, we need to make sure group descriptor is not corrupt. We add checksum to group descriptor to detect corruption. If the descriptor is found to be corrupt, we mark all the blocks and inodes in the group used. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-17 02:38:25 +04:00
if (!ext4_group_desc_csum_verify(sbi, i, gdp)) {
ext4_msg(sb, KERN_ERR, "ext4_check_descriptors: "
"Checksum for group %u failed (%u!=%u)",
i, le16_to_cpu(ext4_group_desc_csum(sbi, i,
gdp)), le16_to_cpu(gdp->bg_checksum));
if (!(sb->s_flags & MS_RDONLY)) {
ext4_unlock_group(sb, i);
return 0;
}
Ext4: Uninitialized Block Groups In pass1 of e2fsck, every inode table in the fileystem is scanned and checked, regardless of whether it is in use. This is this the most time consuming part of the filesystem check. The unintialized block group feature can greatly reduce e2fsck time by eliminating checking of uninitialized inodes. With this feature, there is a a high water mark of used inodes for each block group. Block and inode bitmaps can be uninitialized on disk via a flag in the group descriptor to avoid reading or scanning them at e2fsck time. A checksum of each group descriptor is used to ensure that corruption in the group descriptor's bit flags does not cause incorrect operation. The feature is enabled through a mkfs option mke2fs /dev/ -O uninit_groups A patch adding support for uninitialized block groups to e2fsprogs tools has been posted to the linux-ext4 mailing list. The patches have been stress tested with fsstress and fsx. In performance tests testing e2fsck time, we have seen that e2fsck time on ext3 grows linearly with the total number of inodes in the filesytem. In ext4 with the uninitialized block groups feature, the e2fsck time is constant, based solely on the number of used inodes rather than the total inode count. Since typical ext4 filesystems only use 1-10% of their inodes, this feature can greatly reduce e2fsck time for users. With performance improvement of 2-20 times, depending on how full the filesystem is. The attached graph shows the major improvements in e2fsck times in filesystems with a large total inode count, but few inodes in use. In each group descriptor if we have EXT4_BG_INODE_UNINIT set in bg_flags: Inode table is not initialized/used in this group. So we can skip the consistency check during fsck. EXT4_BG_BLOCK_UNINIT set in bg_flags: No block in the group is used. So we can skip the block bitmap verification for this group. We also add two new fields to group descriptor as a part of uninitialized group patch. __le16 bg_itable_unused; /* Unused inodes count */ __le16 bg_checksum; /* crc16(sb_uuid+group+desc) */ bg_itable_unused: If we have EXT4_BG_INODE_UNINIT not set in bg_flags then bg_itable_unused will give the offset within the inode table till the inodes are used. This can be used by fsck to skip list of inodes that are marked unused. bg_checksum: Now that we depend on bg_flags and bg_itable_unused to determine the block and inode usage, we need to make sure group descriptor is not corrupt. We add checksum to group descriptor to detect corruption. If the descriptor is found to be corrupt, we mark all the blocks and inodes in the group used. Signed-off-by: Avantika Mathur <mathur@us.ibm.com> Signed-off-by: Andreas Dilger <adilger@clusterfs.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
2007-10-17 02:38:25 +04:00
}
ext4_unlock_group(sb, i);
if (!flexbg_flag)
first_block += EXT4_BLOCKS_PER_GROUP(sb);
}
ext4_free_blocks_count_set(sbi->s_es, ext4_count_free_blocks(sb));
sbi->s_es->s_free_inodes_count =cpu_to_le32(ext4_count_free_inodes(sb));
return 1;
}
/* ext4_orphan_cleanup() walks a singly-linked list of inodes (starting at
* the superblock) which were deleted from all directories, but held open by
* a process at the time of a crash. We walk the list and try to delete these
* inodes at recovery time (only with a read-write filesystem).
*
* In order to keep the orphan inode chain consistent during traversal (in
* case of crash during recovery), we link each inode into the superblock
* orphan list_head and handle it the same way as an inode deletion during
* normal operation (which journals the operations for us).
*
* We only do an iget() and an iput() on each inode, which is very safe if we
* accidentally point at an in-use or already deleted inode. The worst that
* can happen in this case is that we get a "bit already cleared" message from
* ext4_free_inode(). The only reason we would point at a wrong inode is if
* e2fsck was run on this filesystem, and it must have already done the orphan
* inode cleanup for us, so we can safely abort without any further action.
*/
static void ext4_orphan_cleanup(struct super_block *sb,
struct ext4_super_block *es)
{
unsigned int s_flags = sb->s_flags;
int nr_orphans = 0, nr_truncates = 0;
#ifdef CONFIG_QUOTA
int i;
#endif
if (!es->s_last_orphan) {
jbd_debug(4, "no orphan inodes to clean up\n");
return;
}
if (bdev_read_only(sb->s_bdev)) {
ext4_msg(sb, KERN_ERR, "write access "
"unavailable, skipping orphan cleanup");
return;
}
if (EXT4_SB(sb)->s_mount_state & EXT4_ERROR_FS) {
if (es->s_last_orphan)
jbd_debug(1, "Errors on filesystem, "
"clearing orphan list.\n");
es->s_last_orphan = 0;
jbd_debug(1, "Skipping orphan recovery on fs with errors.\n");
return;
}
if (s_flags & MS_RDONLY) {
ext4_msg(sb, KERN_INFO, "orphan cleanup on readonly fs");
sb->s_flags &= ~MS_RDONLY;
}
#ifdef CONFIG_QUOTA
/* Needed for iput() to work correctly and not trash data */
sb->s_flags |= MS_ACTIVE;
/* Turn on quotas so that they are updated correctly */
for (i = 0; i < MAXQUOTAS; i++) {
if (EXT4_SB(sb)->s_qf_names[i]) {
int ret = ext4_quota_on_mount(sb, i);
if (ret < 0)
ext4_msg(sb, KERN_ERR,
"Cannot turn on journaled "
"quota: error %d", ret);
}
}
#endif
while (es->s_last_orphan) {
struct inode *inode;
inode = ext4_orphan_get(sb, le32_to_cpu(es->s_last_orphan));
if (IS_ERR(inode)) {
es->s_last_orphan = 0;
break;
}
list_add(&EXT4_I(inode)->i_orphan, &EXT4_SB(sb)->s_orphan);
vfs_dq_init(inode);
if (inode->i_nlink) {
ext4_msg(sb, KERN_DEBUG,
"%s: truncating inode %lu to %lld bytes",
__func__, inode->i_ino, inode->i_size);
jbd_debug(2, "truncating inode %lu to %lld bytes\n",
inode->i_ino, inode->i_size);
ext4_truncate(inode);
nr_truncates++;
} else {
ext4_msg(sb, KERN_DEBUG,
"%s: deleting unreferenced inode %lu",
__func__, inode->i_ino);
jbd_debug(2, "deleting unreferenced inode %lu\n",
inode->i_ino);
nr_orphans++;
}
iput(inode); /* The delete magic happens here! */
}
#define PLURAL(x) (x), ((x) == 1) ? "" : "s"
if (nr_orphans)
ext4_msg(sb, KERN_INFO, "%d orphan inode%s deleted",
PLURAL(nr_orphans));
if (nr_truncates)
ext4_msg(sb, KERN_INFO, "%d truncate%s cleaned up",
PLURAL(nr_truncates));
#ifdef CONFIG_QUOTA
/* Turn quotas off */
for (i = 0; i < MAXQUOTAS; i++) {
if (sb_dqopt(sb)->files[i])
vfs_quota_off(sb, i, 0);
}
#endif
sb->s_flags = s_flags; /* Restore MS_RDONLY status */
}
/*
* Maximal extent format file size.
* Resulting logical blkno at s_maxbytes must fit in our on-disk
* extent format containers, within a sector_t, and within i_blocks
* in the vfs. ext4 inode has 48 bits of i_block in fsblock units,
* so that won't be a limiting factor.
*
* Note, this does *not* consider any metadata overhead for vfs i_blocks.
*/
static loff_t ext4_max_size(int blkbits, int has_huge_files)
{
loff_t res;
loff_t upper_limit = MAX_LFS_FILESIZE;
/* small i_blocks in vfs inode? */
if (!has_huge_files || sizeof(blkcnt_t) < sizeof(u64)) {
/*
* CONFIG_LBDAF is not enabled implies the inode
* i_block represent total blocks in 512 bytes
* 32 == size of vfs inode i_blocks * 8
*/
upper_limit = (1LL << 32) - 1;
/* total blocks in file system block size */
upper_limit >>= (blkbits - 9);
upper_limit <<= blkbits;
}
/* 32-bit extent-start container, ee_block */
res = 1LL << 32;
res <<= blkbits;
res -= 1;
/* Sanity check against vm- & vfs- imposed limits */
if (res > upper_limit)
res = upper_limit;
return res;
}
/*
* Maximal bitmap file size. There is a direct, and {,double-,triple-}indirect
* block limit, and also a limit of (2^48 - 1) 512-byte sectors in i_blocks.
* We need to be 1 filesystem block less than the 2^48 sector limit.
*/
static loff_t ext4_max_bitmap_size(int bits, int has_huge_files)
{
loff_t res = EXT4_NDIR_BLOCKS;
int meta_blocks;
loff_t upper_limit;
/* This is calculated to be the largest file size for a dense, block
* mapped file such that the file's total number of 512-byte sectors,
* including data and all indirect blocks, does not exceed (2^48 - 1).
*
* __u32 i_blocks_lo and _u16 i_blocks_high represent the total
* number of 512-byte sectors of the file.
*/
if (!has_huge_files || sizeof(blkcnt_t) < sizeof(u64)) {
/*
* !has_huge_files or CONFIG_LBDAF not enabled implies that
* the inode i_block field represents total file blocks in
* 2^32 512-byte sectors == size of vfs inode i_blocks * 8
*/
upper_limit = (1LL << 32) - 1;
/* total blocks in file system block size */
upper_limit >>= (bits - 9);
} else {
/*
* We use 48 bit ext4_inode i_blocks
* With EXT4_HUGE_FILE_FL set the i_blocks
* represent total number of blocks in
* file system block size
*/
upper_limit = (1LL << 48) - 1;
}
/* indirect blocks */
meta_blocks = 1;
/* double indirect blocks */
meta_blocks += 1 + (1LL << (bits-2));
/* tripple indirect blocks */
meta_blocks += 1 + (1LL << (bits-2)) + (1LL << (2*(bits-2)));
upper_limit -= meta_blocks;
upper_limit <<= bits;
res += 1LL << (bits-2);
res += 1LL << (2*(bits-2));
res += 1LL << (3*(bits-2));
res <<= bits;
if (res > upper_limit)
res = upper_limit;
if (res > MAX_LFS_FILESIZE)
res = MAX_LFS_FILESIZE;
return res;
}
static ext4_fsblk_t descriptor_loc(struct super_block *sb,
ext4_fsblk_t logical_sb_block, int nr)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
ext4_group_t bg, first_meta_bg;
int has_super = 0;
first_meta_bg = le32_to_cpu(sbi->s_es->s_first_meta_bg);
if (!EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_META_BG) ||
nr < first_meta_bg)
return logical_sb_block + nr + 1;
bg = sbi->s_desc_per_block * nr;
if (ext4_bg_has_super(sb, bg))
has_super = 1;
return (has_super + ext4_group_first_block_no(sb, bg));
}
/**
* ext4_get_stripe_size: Get the stripe size.
* @sbi: In memory super block info
*
* If we have specified it via mount option, then
* use the mount option value. If the value specified at mount time is
* greater than the blocks per group use the super block value.
* If the super block value is greater than blocks per group return 0.
* Allocator needs it be less than blocks per group.
*
*/
static unsigned long ext4_get_stripe_size(struct ext4_sb_info *sbi)
{
unsigned long stride = le16_to_cpu(sbi->s_es->s_raid_stride);
unsigned long stripe_width =
le32_to_cpu(sbi->s_es->s_raid_stripe_width);
if (sbi->s_stripe && sbi->s_stripe <= sbi->s_blocks_per_group)
return sbi->s_stripe;
if (stripe_width <= sbi->s_blocks_per_group)
return stripe_width;
if (stride <= sbi->s_blocks_per_group)
return stride;
return 0;
}
/* sysfs supprt */
struct ext4_attr {
struct attribute attr;
ssize_t (*show)(struct ext4_attr *, struct ext4_sb_info *, char *);
ssize_t (*store)(struct ext4_attr *, struct ext4_sb_info *,
const char *, size_t);
int offset;
};
static int parse_strtoul(const char *buf,
unsigned long max, unsigned long *value)
{
char *endp;
while (*buf && isspace(*buf))
buf++;
*value = simple_strtoul(buf, &endp, 0);
while (*endp && isspace(*endp))
endp++;
if (*endp || *value > max)
return -EINVAL;
return 0;
}
static ssize_t delayed_allocation_blocks_show(struct ext4_attr *a,
struct ext4_sb_info *sbi,
char *buf)
{
return snprintf(buf, PAGE_SIZE, "%llu\n",
(s64) percpu_counter_sum(&sbi->s_dirtyblocks_counter));
}
static ssize_t session_write_kbytes_show(struct ext4_attr *a,
struct ext4_sb_info *sbi, char *buf)
{
struct super_block *sb = sbi->s_buddy_cache->i_sb;
return snprintf(buf, PAGE_SIZE, "%lu\n",
(part_stat_read(sb->s_bdev->bd_part, sectors[1]) -
sbi->s_sectors_written_start) >> 1);
}
static ssize_t lifetime_write_kbytes_show(struct ext4_attr *a,
struct ext4_sb_info *sbi, char *buf)
{
struct super_block *sb = sbi->s_buddy_cache->i_sb;
return snprintf(buf, PAGE_SIZE, "%llu\n",
sbi->s_kbytes_written +
((part_stat_read(sb->s_bdev->bd_part, sectors[1]) -
EXT4_SB(sb)->s_sectors_written_start) >> 1));
}
static ssize_t inode_readahead_blks_store(struct ext4_attr *a,
struct ext4_sb_info *sbi,
const char *buf, size_t count)
{
unsigned long t;
if (parse_strtoul(buf, 0x40000000, &t))
return -EINVAL;
if (!is_power_of_2(t))
return -EINVAL;
sbi->s_inode_readahead_blks = t;
return count;
}
static ssize_t sbi_ui_show(struct ext4_attr *a,
struct ext4_sb_info *sbi, char *buf)
{
unsigned int *ui = (unsigned int *) (((char *) sbi) + a->offset);
return snprintf(buf, PAGE_SIZE, "%u\n", *ui);
}
static ssize_t sbi_ui_store(struct ext4_attr *a,
struct ext4_sb_info *sbi,
const char *buf, size_t count)
{
unsigned int *ui = (unsigned int *) (((char *) sbi) + a->offset);
unsigned long t;
if (parse_strtoul(buf, 0xffffffff, &t))
return -EINVAL;
*ui = t;
return count;
}
#define EXT4_ATTR_OFFSET(_name,_mode,_show,_store,_elname) \
static struct ext4_attr ext4_attr_##_name = { \
.attr = {.name = __stringify(_name), .mode = _mode }, \
.show = _show, \
.store = _store, \
.offset = offsetof(struct ext4_sb_info, _elname), \
}
#define EXT4_ATTR(name, mode, show, store) \
static struct ext4_attr ext4_attr_##name = __ATTR(name, mode, show, store)
#define EXT4_RO_ATTR(name) EXT4_ATTR(name, 0444, name##_show, NULL)
#define EXT4_RW_ATTR(name) EXT4_ATTR(name, 0644, name##_show, name##_store)
#define EXT4_RW_ATTR_SBI_UI(name, elname) \
EXT4_ATTR_OFFSET(name, 0644, sbi_ui_show, sbi_ui_store, elname)
#define ATTR_LIST(name) &ext4_attr_##name.attr
EXT4_RO_ATTR(delayed_allocation_blocks);
EXT4_RO_ATTR(session_write_kbytes);
EXT4_RO_ATTR(lifetime_write_kbytes);
EXT4_ATTR_OFFSET(inode_readahead_blks, 0644, sbi_ui_show,
inode_readahead_blks_store, s_inode_readahead_blks);
EXT4_RW_ATTR_SBI_UI(inode_goal, s_inode_goal);
EXT4_RW_ATTR_SBI_UI(mb_stats, s_mb_stats);
EXT4_RW_ATTR_SBI_UI(mb_max_to_scan, s_mb_max_to_scan);
EXT4_RW_ATTR_SBI_UI(mb_min_to_scan, s_mb_min_to_scan);
EXT4_RW_ATTR_SBI_UI(mb_order2_req, s_mb_order2_reqs);
EXT4_RW_ATTR_SBI_UI(mb_stream_req, s_mb_stream_request);
EXT4_RW_ATTR_SBI_UI(mb_group_prealloc, s_mb_group_prealloc);
static struct attribute *ext4_attrs[] = {
ATTR_LIST(delayed_allocation_blocks),
ATTR_LIST(session_write_kbytes),
ATTR_LIST(lifetime_write_kbytes),
ATTR_LIST(inode_readahead_blks),
ATTR_LIST(inode_goal),
ATTR_LIST(mb_stats),
ATTR_LIST(mb_max_to_scan),
ATTR_LIST(mb_min_to_scan),
ATTR_LIST(mb_order2_req),
ATTR_LIST(mb_stream_req),
ATTR_LIST(mb_group_prealloc),
NULL,
};
static ssize_t ext4_attr_show(struct kobject *kobj,
struct attribute *attr, char *buf)
{
struct ext4_sb_info *sbi = container_of(kobj, struct ext4_sb_info,
s_kobj);
struct ext4_attr *a = container_of(attr, struct ext4_attr, attr);
return a->show ? a->show(a, sbi, buf) : 0;
}
static ssize_t ext4_attr_store(struct kobject *kobj,
struct attribute *attr,
const char *buf, size_t len)
{
struct ext4_sb_info *sbi = container_of(kobj, struct ext4_sb_info,
s_kobj);
struct ext4_attr *a = container_of(attr, struct ext4_attr, attr);
return a->store ? a->store(a, sbi, buf, len) : 0;
}
static void ext4_sb_release(struct kobject *kobj)
{
struct ext4_sb_info *sbi = container_of(kobj, struct ext4_sb_info,
s_kobj);
complete(&sbi->s_kobj_unregister);
}
static struct sysfs_ops ext4_attr_ops = {
.show = ext4_attr_show,
.store = ext4_attr_store,
};
static struct kobj_type ext4_ktype = {
.default_attrs = ext4_attrs,
.sysfs_ops = &ext4_attr_ops,
.release = ext4_sb_release,
};
/*
* Check whether this filesystem can be mounted based on
* the features present and the RDONLY/RDWR mount requested.
* Returns 1 if this filesystem can be mounted as requested,
* 0 if it cannot be.
*/
static int ext4_feature_set_ok(struct super_block *sb, int readonly)
{
if (EXT4_HAS_INCOMPAT_FEATURE(sb, ~EXT4_FEATURE_INCOMPAT_SUPP)) {
ext4_msg(sb, KERN_ERR,
"Couldn't mount because of "
"unsupported optional features (%x)",
(le32_to_cpu(EXT4_SB(sb)->s_es->s_feature_incompat) &
~EXT4_FEATURE_INCOMPAT_SUPP));
return 0;
}
if (readonly)
return 1;
/* Check that feature set is OK for a read-write mount */
if (EXT4_HAS_RO_COMPAT_FEATURE(sb, ~EXT4_FEATURE_RO_COMPAT_SUPP)) {
ext4_msg(sb, KERN_ERR, "couldn't mount RDWR because of "
"unsupported optional features (%x)",
(le32_to_cpu(EXT4_SB(sb)->s_es->s_feature_ro_compat) &
~EXT4_FEATURE_RO_COMPAT_SUPP));
return 0;
}
/*
* Large file size enabled file system can only be mounted
* read-write on 32-bit systems if kernel is built with CONFIG_LBDAF
*/
if (EXT4_HAS_RO_COMPAT_FEATURE(sb, EXT4_FEATURE_RO_COMPAT_HUGE_FILE)) {
if (sizeof(blkcnt_t) < sizeof(u64)) {
ext4_msg(sb, KERN_ERR, "Filesystem with huge files "
"cannot be mounted RDWR without "
"CONFIG_LBDAF");
return 0;
}
}
return 1;
}
static int ext4_fill_super(struct super_block *sb, void *data, int silent)
__releases(kernel_lock)
__acquires(kernel_lock)
{
struct buffer_head *bh;
struct ext4_super_block *es = NULL;
struct ext4_sb_info *sbi;
ext4_fsblk_t block;
ext4_fsblk_t sb_block = get_sb_block(&data);
ext4_fsblk_t logical_sb_block;
unsigned long offset = 0;
unsigned long journal_devnum = 0;
unsigned long def_mount_opts;
struct inode *root;
char *cp;
const char *descr;
int ret = -EINVAL;
int blocksize;
unsigned int db_count;
unsigned int i;
int needs_recovery, has_huge_files;
__u64 blocks_count;
int err;
unsigned int journal_ioprio = DEFAULT_JOURNAL_IOPRIO;
sbi = kzalloc(sizeof(*sbi), GFP_KERNEL);
if (!sbi)
return -ENOMEM;
sbi->s_blockgroup_lock =
kzalloc(sizeof(struct blockgroup_lock), GFP_KERNEL);
if (!sbi->s_blockgroup_lock) {
kfree(sbi);
return -ENOMEM;
}
sb->s_fs_info = sbi;
sbi->s_mount_opt = 0;
sbi->s_resuid = EXT4_DEF_RESUID;
sbi->s_resgid = EXT4_DEF_RESGID;
sbi->s_inode_readahead_blks = EXT4_DEF_INODE_READAHEAD_BLKS;
sbi->s_sb_block = sb_block;
sbi->s_sectors_written_start = part_stat_read(sb->s_bdev->bd_part,
sectors[1]);
unlock_kernel();
/* Cleanup superblock name */
for (cp = sb->s_id; (cp = strchr(cp, '/'));)
*cp = '!';
blocksize = sb_min_blocksize(sb, EXT4_MIN_BLOCK_SIZE);
if (!blocksize) {
ext4_msg(sb, KERN_ERR, "unable to set blocksize");
goto out_fail;
}
/*
* The ext4 superblock will not be buffer aligned for other than 1kB
* block sizes. We need to calculate the offset from buffer start.
*/
if (blocksize != EXT4_MIN_BLOCK_SIZE) {
logical_sb_block = sb_block * EXT4_MIN_BLOCK_SIZE;
offset = do_div(logical_sb_block, blocksize);
} else {
logical_sb_block = sb_block;
}
if (!(bh = sb_bread(sb, logical_sb_block))) {
ext4_msg(sb, KERN_ERR, "unable to read superblock");
goto out_fail;
}
/*
* Note: s_es must be initialized as soon as possible because
* some ext4 macro-instructions depend on its value
*/
es = (struct ext4_super_block *) (((char *)bh->b_data) + offset);
sbi->s_es = es;
sb->s_magic = le16_to_cpu(es->s_magic);
if (sb->s_magic != EXT4_SUPER_MAGIC)
goto cantfind_ext4;
sbi->s_kbytes_written = le64_to_cpu(es->s_kbytes_written);
/* Set defaults before we parse the mount options */
def_mount_opts = le32_to_cpu(es->s_default_mount_opts);
if (def_mount_opts & EXT4_DEFM_DEBUG)
set_opt(sbi->s_mount_opt, DEBUG);
if (def_mount_opts & EXT4_DEFM_BSDGROUPS)
set_opt(sbi->s_mount_opt, GRPID);
if (def_mount_opts & EXT4_DEFM_UID16)
set_opt(sbi->s_mount_opt, NO_UID32);
#ifdef CONFIG_EXT4_FS_XATTR
if (def_mount_opts & EXT4_DEFM_XATTR_USER)
set_opt(sbi->s_mount_opt, XATTR_USER);
#endif
#ifdef CONFIG_EXT4_FS_POSIX_ACL
if (def_mount_opts & EXT4_DEFM_ACL)
set_opt(sbi->s_mount_opt, POSIX_ACL);
#endif
if ((def_mount_opts & EXT4_DEFM_JMODE) == EXT4_DEFM_JMODE_DATA)
sbi->s_mount_opt |= EXT4_MOUNT_JOURNAL_DATA;
else if ((def_mount_opts & EXT4_DEFM_JMODE) == EXT4_DEFM_JMODE_ORDERED)
sbi->s_mount_opt |= EXT4_MOUNT_ORDERED_DATA;
else if ((def_mount_opts & EXT4_DEFM_JMODE) == EXT4_DEFM_JMODE_WBACK)
sbi->s_mount_opt |= EXT4_MOUNT_WRITEBACK_DATA;
if (le16_to_cpu(sbi->s_es->s_errors) == EXT4_ERRORS_PANIC)
set_opt(sbi->s_mount_opt, ERRORS_PANIC);
else if (le16_to_cpu(sbi->s_es->s_errors) == EXT4_ERRORS_CONTINUE)
[PATCH] ext4: errors behaviour fix Current error behaviour for ext2 and ext3 filesystems does not fully correspond to the documentation and should be fixed. According to man 8 mount, ext2 and ext3 file systems allow to set one of 3 different on-errors behaviours: ---- start of quote man 8 mount ---- errors=continue / errors=remount-ro / errors=panic Define the behaviour when an error is encountered. (Either ignore errors and just mark the file system erroneous and continue, or remount the file system read-only, or panic and halt the system.) The default is set in the filesystem superblock, and can be changed using tune2fs(8). ---- end of quote ---- However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect handle of errors on ext3. Then we've checked corresponding code in ext2 and discovered that it is buggy as well: - EXT2_ERRORS_CONTINUE is not read from the superblock (the same); - parse_option() does not clean the alternative values and thus something like (ERRORS_CONT|ERRORS_RO) can be set; - if options are omitted, parse_option() does not set any of these options. Therefore it is possible to set any combination of these options on the ext2: - none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount options; - any of them may be set using mount options; - 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the superblock and other value in mount options; - and finally all three options may be set by adding third option in remount. Currently ext2 uses these values only in ext2_error() and it is not leading to any noticeable troubles. However somebody may be discouraged when he will try to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in mount options. This patch: EXT4_ERRORS_CONTINUE should be taken from the superblock as default value for error behaviour. Signed-off-by: Dmitry Mishin <dim@openvz.org> Acked-by: Vasily Averin <vvs@sw.ru> Acked-by: Kirill Korotaev <dev@openvz.org> Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-11 12:21:21 +04:00
set_opt(sbi->s_mount_opt, ERRORS_CONT);
else
set_opt(sbi->s_mount_opt, ERRORS_RO);
sbi->s_resuid = le16_to_cpu(es->s_def_resuid);
sbi->s_resgid = le16_to_cpu(es->s_def_resgid);
sbi->s_commit_interval = JBD2_DEFAULT_MAX_COMMIT_AGE * HZ;
sbi->s_min_batch_time = EXT4_DEF_MIN_BATCH_TIME;
sbi->s_max_batch_time = EXT4_DEF_MAX_BATCH_TIME;
sbi->s_mb_history_max = default_mb_history_length;
set_opt(sbi->s_mount_opt, BARRIER);
/*
* enable delayed allocation by default
* Use -o nodelalloc to turn it off
*/
set_opt(sbi->s_mount_opt, DELALLOC);
if (!parse_options((char *) data, sb, &journal_devnum,
&journal_ioprio, NULL, 0))
goto failed_mount;
sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
((sbi->s_mount_opt & EXT4_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
if (le32_to_cpu(es->s_rev_level) == EXT4_GOOD_OLD_REV &&
(EXT4_HAS_COMPAT_FEATURE(sb, ~0U) ||
EXT4_HAS_RO_COMPAT_FEATURE(sb, ~0U) ||
EXT4_HAS_INCOMPAT_FEATURE(sb, ~0U)))
ext4_msg(sb, KERN_WARNING,
"feature flags set on rev 0 fs, "
"running e2fsck is recommended");
/*
* Check feature flags regardless of the revision level, since we
* previously didn't change the revision level when setting the flags,
* so there is a chance incompat flags are set on a rev 0 filesystem.
*/
if (!ext4_feature_set_ok(sb, (sb->s_flags & MS_RDONLY)))
goto failed_mount;
blocksize = BLOCK_SIZE << le32_to_cpu(es->s_log_block_size);
if (blocksize < EXT4_MIN_BLOCK_SIZE ||
blocksize > EXT4_MAX_BLOCK_SIZE) {
ext4_msg(sb, KERN_ERR,
"Unsupported filesystem blocksize %d", blocksize);
goto failed_mount;
}
if (sb->s_blocksize != blocksize) {
/* Validate the filesystem blocksize */
if (!sb_set_blocksize(sb, blocksize)) {
ext4_msg(sb, KERN_ERR, "bad block size %d",
blocksize);
goto failed_mount;
}
brelse(bh);
logical_sb_block = sb_block * EXT4_MIN_BLOCK_SIZE;
offset = do_div(logical_sb_block, blocksize);
bh = sb_bread(sb, logical_sb_block);
if (!bh) {
ext4_msg(sb, KERN_ERR,
"Can't read superblock on 2nd try");
goto failed_mount;
}
es = (struct ext4_super_block *)(((char *)bh->b_data) + offset);
sbi->s_es = es;
if (es->s_magic != cpu_to_le16(EXT4_SUPER_MAGIC)) {
ext4_msg(sb, KERN_ERR,
"Magic mismatch, very weird!");
goto failed_mount;
}
}
has_huge_files = EXT4_HAS_RO_COMPAT_FEATURE(sb,
EXT4_FEATURE_RO_COMPAT_HUGE_FILE);
sbi->s_bitmap_maxbytes = ext4_max_bitmap_size(sb->s_blocksize_bits,
has_huge_files);
sb->s_maxbytes = ext4_max_size(sb->s_blocksize_bits, has_huge_files);
if (le32_to_cpu(es->s_rev_level) == EXT4_GOOD_OLD_REV) {
sbi->s_inode_size = EXT4_GOOD_OLD_INODE_SIZE;
sbi->s_first_ino = EXT4_GOOD_OLD_FIRST_INO;
} else {
sbi->s_inode_size = le16_to_cpu(es->s_inode_size);
sbi->s_first_ino = le32_to_cpu(es->s_first_ino);
if ((sbi->s_inode_size < EXT4_GOOD_OLD_INODE_SIZE) ||
(!is_power_of_2(sbi->s_inode_size)) ||
(sbi->s_inode_size > blocksize)) {
ext4_msg(sb, KERN_ERR,
"unsupported inode size: %d",
sbi->s_inode_size);
goto failed_mount;
}
if (sbi->s_inode_size > EXT4_GOOD_OLD_INODE_SIZE)
sb->s_time_gran = 1 << (EXT4_EPOCH_BITS - 2);
}
sbi->s_desc_size = le16_to_cpu(es->s_desc_size);
if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_64BIT)) {
if (sbi->s_desc_size < EXT4_MIN_DESC_SIZE_64BIT ||
sbi->s_desc_size > EXT4_MAX_DESC_SIZE ||
!is_power_of_2(sbi->s_desc_size)) {
ext4_msg(sb, KERN_ERR,
"unsupported descriptor size %lu",
sbi->s_desc_size);
goto failed_mount;
}
} else
sbi->s_desc_size = EXT4_MIN_DESC_SIZE;
sbi->s_blocks_per_group = le32_to_cpu(es->s_blocks_per_group);
sbi->s_inodes_per_group = le32_to_cpu(es->s_inodes_per_group);
if (EXT4_INODE_SIZE(sb) == 0 || EXT4_INODES_PER_GROUP(sb) == 0)
goto cantfind_ext4;
sbi->s_inodes_per_block = blocksize / EXT4_INODE_SIZE(sb);
if (sbi->s_inodes_per_block == 0)
goto cantfind_ext4;
sbi->s_itb_per_group = sbi->s_inodes_per_group /
sbi->s_inodes_per_block;
sbi->s_desc_per_block = blocksize / EXT4_DESC_SIZE(sb);
sbi->s_sbh = bh;
sbi->s_mount_state = le16_to_cpu(es->s_state);
sbi->s_addr_per_block_bits = ilog2(EXT4_ADDR_PER_BLOCK(sb));
sbi->s_desc_per_block_bits = ilog2(EXT4_DESC_PER_BLOCK(sb));
for (i = 0; i < 4; i++)
sbi->s_hash_seed[i] = le32_to_cpu(es->s_hash_seed[i]);
sbi->s_def_hash_version = es->s_def_hash_version;
i = le32_to_cpu(es->s_flags);
if (i & EXT2_FLAGS_UNSIGNED_HASH)
sbi->s_hash_unsigned = 3;
else if ((i & EXT2_FLAGS_SIGNED_HASH) == 0) {
#ifdef __CHAR_UNSIGNED__
es->s_flags |= cpu_to_le32(EXT2_FLAGS_UNSIGNED_HASH);
sbi->s_hash_unsigned = 3;
#else
es->s_flags |= cpu_to_le32(EXT2_FLAGS_SIGNED_HASH);
#endif
sb->s_dirt = 1;
}
if (sbi->s_blocks_per_group > blocksize * 8) {
ext4_msg(sb, KERN_ERR,
"#blocks per group too big: %lu",
sbi->s_blocks_per_group);
goto failed_mount;
}
if (sbi->s_inodes_per_group > blocksize * 8) {
ext4_msg(sb, KERN_ERR,
"#inodes per group too big: %lu",
sbi->s_inodes_per_group);
goto failed_mount;
}
/*
* Test whether we have more sectors than will fit in sector_t,
* and whether the max offset is addressable by the page cache.
*/
if ((ext4_blocks_count(es) >
(sector_t)(~0ULL) >> (sb->s_blocksize_bits - 9)) ||
(ext4_blocks_count(es) >
(pgoff_t)(~0ULL) >> (PAGE_CACHE_SHIFT - sb->s_blocksize_bits))) {
ext4_msg(sb, KERN_ERR, "filesystem"
" too large to mount safely on this system");
if (sizeof(sector_t) < 8)
ext4_msg(sb, KERN_WARNING, "CONFIG_LBDAF not enabled");
ret = -EFBIG;
goto failed_mount;
}
if (EXT4_BLOCKS_PER_GROUP(sb) == 0)
goto cantfind_ext4;
ext4: fix oops on corrupted ext4 mount When mounting an ext4 filesystem with corrupted s_first_data_block, things can go very wrong and oops. Because blocks_count in ext4_fill_super is a u64, and we must use do_div, the calculation of db_count is done differently than on ext4. If first_data_block is corrupted such that it is larger than ext4_blocks_count, for example, then the intermediate blocks_count value may go negative, but sign-extend to a very large value: blocks_count = (ext4_blocks_count(es) - le32_to_cpu(es->s_first_data_block) + EXT4_BLOCKS_PER_GROUP(sb) - 1); This is then assigned to s_groups_count which is an unsigned long: sbi->s_groups_count = blocks_count; This may result in a value of 0xFFFFFFFF which is then used to compute db_count: db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) / EXT4_DESC_PER_BLOCK(sb); and in this case db_count will wind up as 0 because the addition overflows 32 bits. This in turn causes the kmalloc for group_desc to be of 0 size: sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *), GFP_KERNEL); and eventually in ext4_check_descriptors, dereferencing sbi->s_group_desc[desc_block] will result in a NULL pointer dereference. The simplest test seems to be to sanity check s_first_data_block, EXT4_BLOCKS_PER_GROUP, and ext4_blocks_count values to be sure their combination won't result in a bad intermediate value for blocks_count. We could just check for db_count == 0, but catching it at the root cause seems like it provides more info. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Mingming Cao <cmm@us.ibm.com>
2008-01-29 07:58:27 +03:00
/* check blocks count against device size */
blocks_count = sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits;
if (blocks_count && ext4_blocks_count(es) > blocks_count) {
ext4_msg(sb, KERN_WARNING, "bad geometry: block count %llu "
"exceeds size of device (%llu blocks)",
ext4_blocks_count(es), blocks_count);
goto failed_mount;
}
/*
* It makes no sense for the first data block to be beyond the end
* of the filesystem.
*/
if (le32_to_cpu(es->s_first_data_block) >= ext4_blocks_count(es)) {
ext4_msg(sb, KERN_WARNING, "bad geometry: first data"
"block %u is beyond end of filesystem (%llu)",
le32_to_cpu(es->s_first_data_block),
ext4_blocks_count(es));
ext4: fix oops on corrupted ext4 mount When mounting an ext4 filesystem with corrupted s_first_data_block, things can go very wrong and oops. Because blocks_count in ext4_fill_super is a u64, and we must use do_div, the calculation of db_count is done differently than on ext4. If first_data_block is corrupted such that it is larger than ext4_blocks_count, for example, then the intermediate blocks_count value may go negative, but sign-extend to a very large value: blocks_count = (ext4_blocks_count(es) - le32_to_cpu(es->s_first_data_block) + EXT4_BLOCKS_PER_GROUP(sb) - 1); This is then assigned to s_groups_count which is an unsigned long: sbi->s_groups_count = blocks_count; This may result in a value of 0xFFFFFFFF which is then used to compute db_count: db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) / EXT4_DESC_PER_BLOCK(sb); and in this case db_count will wind up as 0 because the addition overflows 32 bits. This in turn causes the kmalloc for group_desc to be of 0 size: sbi->s_group_desc = kmalloc(db_count * sizeof (struct buffer_head *), GFP_KERNEL); and eventually in ext4_check_descriptors, dereferencing sbi->s_group_desc[desc_block] will result in a NULL pointer dereference. The simplest test seems to be to sanity check s_first_data_block, EXT4_BLOCKS_PER_GROUP, and ext4_blocks_count values to be sure their combination won't result in a bad intermediate value for blocks_count. We could just check for db_count == 0, but catching it at the root cause seems like it provides more info. Signed-off-by: Eric Sandeen <sandeen@redhat.com> Reviewed-by: Mingming Cao <cmm@us.ibm.com>
2008-01-29 07:58:27 +03:00
goto failed_mount;
}
blocks_count = (ext4_blocks_count(es) -
le32_to_cpu(es->s_first_data_block) +
EXT4_BLOCKS_PER_GROUP(sb) - 1);
do_div(blocks_count, EXT4_BLOCKS_PER_GROUP(sb));
if (blocks_count > ((uint64_t)1<<32) - EXT4_DESC_PER_BLOCK(sb)) {
ext4_msg(sb, KERN_WARNING, "groups count too large: %u "
"(block count %llu, first data block %u, "
"blocks per group %lu)", sbi->s_groups_count,
ext4_blocks_count(es),
le32_to_cpu(es->s_first_data_block),
EXT4_BLOCKS_PER_GROUP(sb));
goto failed_mount;
}
sbi->s_groups_count = blocks_count;
sbi->s_blockfile_groups = min_t(ext4_group_t, sbi->s_groups_count,
(EXT4_MAX_BLOCK_FILE_PHYS / EXT4_BLOCKS_PER_GROUP(sb)));
db_count = (sbi->s_groups_count + EXT4_DESC_PER_BLOCK(sb) - 1) /
EXT4_DESC_PER_BLOCK(sb);
sbi->s_group_desc = kmalloc(db_count * sizeof(struct buffer_head *),
GFP_KERNEL);
if (sbi->s_group_desc == NULL) {
ext4_msg(sb, KERN_ERR, "not enough memory");
goto failed_mount;
}
#ifdef CONFIG_PROC_FS
if (ext4_proc_root)
sbi->s_proc = proc_mkdir(sb->s_id, ext4_proc_root);
#endif
bgl_lock_init(sbi->s_blockgroup_lock);
for (i = 0; i < db_count; i++) {
block = descriptor_loc(sb, logical_sb_block, i);
sbi->s_group_desc[i] = sb_bread(sb, block);
if (!sbi->s_group_desc[i]) {
ext4_msg(sb, KERN_ERR,
"can't read group descriptor %d", i);
db_count = i;
goto failed_mount2;
}
}
if (!ext4_check_descriptors(sb)) {
ext4_msg(sb, KERN_ERR, "group descriptors corrupted!");
goto failed_mount2;
}
if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_FLEX_BG))
if (!ext4_fill_flex_info(sb)) {
ext4_msg(sb, KERN_ERR,
"unable to initialize "
"flex_bg meta info!");
goto failed_mount2;
}
sbi->s_gdb_count = db_count;
get_random_bytes(&sbi->s_next_generation, sizeof(u32));
spin_lock_init(&sbi->s_next_gen_lock);
err = percpu_counter_init(&sbi->s_freeblocks_counter,
ext4_count_free_blocks(sb));
if (!err) {
err = percpu_counter_init(&sbi->s_freeinodes_counter,
ext4_count_free_inodes(sb));
}
if (!err) {
err = percpu_counter_init(&sbi->s_dirs_counter,
ext4_count_dirs(sb));
}
if (!err) {
err = percpu_counter_init(&sbi->s_dirtyblocks_counter, 0);
}
if (err) {
ext4_msg(sb, KERN_ERR, "insufficient memory");
goto failed_mount3;
}
sbi->s_stripe = ext4_get_stripe_size(sbi);
/*
* set up enough so that it can read an inode
*/
if (!test_opt(sb, NOLOAD) &&
EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL))
sb->s_op = &ext4_sops;
else
sb->s_op = &ext4_nojournal_sops;
sb->s_export_op = &ext4_export_ops;
sb->s_xattr = ext4_xattr_handlers;
#ifdef CONFIG_QUOTA
sb->s_qcop = &ext4_qctl_operations;
sb->dq_op = &ext4_quota_operations;
#endif
INIT_LIST_HEAD(&sbi->s_orphan); /* unlinked but open files */
mutex_init(&sbi->s_orphan_lock);
mutex_init(&sbi->s_resize_lock);
sb->s_root = NULL;
needs_recovery = (es->s_last_orphan != 0 ||
EXT4_HAS_INCOMPAT_FEATURE(sb,
EXT4_FEATURE_INCOMPAT_RECOVER));
/*
* The first inode we look at is the journal inode. Don't try
* root first: it may be modified in the journal!
*/
if (!test_opt(sb, NOLOAD) &&
EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) {
if (ext4_load_journal(sb, es, journal_devnum))
goto failed_mount3;
if (!(sb->s_flags & MS_RDONLY) &&
EXT4_SB(sb)->s_journal->j_failed_commit) {
ext4_msg(sb, KERN_CRIT, "error: "
"ext4_fill_super: Journal transaction "
"%u is corrupt",
EXT4_SB(sb)->s_journal->j_failed_commit);
if (test_opt(sb, ERRORS_RO)) {
ext4_msg(sb, KERN_CRIT,
"Mounting filesystem read-only");
sb->s_flags |= MS_RDONLY;
EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
}
if (test_opt(sb, ERRORS_PANIC)) {
EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
ext4_commit_super(sb, 1);
goto failed_mount4;
}
}
} else if (test_opt(sb, NOLOAD) && !(sb->s_flags & MS_RDONLY) &&
EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER)) {
ext4_msg(sb, KERN_ERR, "required journal recovery "
"suppressed and not mounted read-only");
goto failed_mount4;
} else {
clear_opt(sbi->s_mount_opt, DATA_FLAGS);
set_opt(sbi->s_mount_opt, WRITEBACK_DATA);
sbi->s_journal = NULL;
needs_recovery = 0;
goto no_journal;
}
if (ext4_blocks_count(es) > 0xffffffffULL &&
!jbd2_journal_set_features(EXT4_SB(sb)->s_journal, 0, 0,
JBD2_FEATURE_INCOMPAT_64BIT)) {
ext4_msg(sb, KERN_ERR, "Failed to set 64-bit journal feature");
goto failed_mount4;
}
jbd2_journal_set_features(sbi->s_journal,
JBD2_FEATURE_COMPAT_CHECKSUM, 0, 0);
if (test_opt(sb, JOURNAL_ASYNC_COMMIT))
jbd2_journal_set_features(sbi->s_journal, 0, 0,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT);
else
jbd2_journal_clear_features(sbi->s_journal, 0, 0,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT);
/* We have now updated the journal if required, so we can
* validate the data journaling mode. */
switch (test_opt(sb, DATA_FLAGS)) {
case 0:
/* No mode set, assume a default based on the journal
* capabilities: ORDERED_DATA if the journal can
* cope, else JOURNAL_DATA
*/
if (jbd2_journal_check_available_features
(sbi->s_journal, 0, 0, JBD2_FEATURE_INCOMPAT_REVOKE))
set_opt(sbi->s_mount_opt, ORDERED_DATA);
else
set_opt(sbi->s_mount_opt, JOURNAL_DATA);
break;
case EXT4_MOUNT_ORDERED_DATA:
case EXT4_MOUNT_WRITEBACK_DATA:
if (!jbd2_journal_check_available_features
(sbi->s_journal, 0, 0, JBD2_FEATURE_INCOMPAT_REVOKE)) {
ext4_msg(sb, KERN_ERR, "Journal does not support "
"requested data journaling mode");
goto failed_mount4;
}
default:
break;
}
set_task_ioprio(sbi->s_journal->j_task, journal_ioprio);
no_journal:
if (test_opt(sb, NOBH)) {
if (!(test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_WRITEBACK_DATA)) {
ext4_msg(sb, KERN_WARNING, "Ignoring nobh option - "
"its supported only with writeback mode");
clear_opt(sbi->s_mount_opt, NOBH);
}
}
/*
* The jbd2_journal_load will have done any necessary log recovery,
* so we can safely mount the rest of the filesystem now.
*/
root = ext4_iget(sb, EXT4_ROOT_INO);
if (IS_ERR(root)) {
ext4_msg(sb, KERN_ERR, "get root inode failed");
ret = PTR_ERR(root);
goto failed_mount4;
}
if (!S_ISDIR(root->i_mode) || !root->i_blocks || !root->i_size) {
iput(root);
ext4_msg(sb, KERN_ERR, "corrupt root inode, run e2fsck");
goto failed_mount4;
}
sb->s_root = d_alloc_root(root);
if (!sb->s_root) {
ext4_msg(sb, KERN_ERR, "get root dentry failed");
iput(root);
ret = -ENOMEM;
goto failed_mount4;
}
ext4_setup_super(sb, es, sb->s_flags & MS_RDONLY);
/* determine the minimum size of new large inodes, if present */
if (sbi->s_inode_size > EXT4_GOOD_OLD_INODE_SIZE) {
sbi->s_want_extra_isize = sizeof(struct ext4_inode) -
EXT4_GOOD_OLD_INODE_SIZE;
if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
EXT4_FEATURE_RO_COMPAT_EXTRA_ISIZE)) {
if (sbi->s_want_extra_isize <
le16_to_cpu(es->s_want_extra_isize))
sbi->s_want_extra_isize =
le16_to_cpu(es->s_want_extra_isize);
if (sbi->s_want_extra_isize <
le16_to_cpu(es->s_min_extra_isize))
sbi->s_want_extra_isize =
le16_to_cpu(es->s_min_extra_isize);
}
}
/* Check if enough inode space is available */
if (EXT4_GOOD_OLD_INODE_SIZE + sbi->s_want_extra_isize >
sbi->s_inode_size) {
sbi->s_want_extra_isize = sizeof(struct ext4_inode) -
EXT4_GOOD_OLD_INODE_SIZE;
ext4_msg(sb, KERN_INFO, "required extra inode space not"
"available");
}
if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
ext4_msg(sb, KERN_WARNING, "Ignoring delalloc option - "
"requested data journaling mode");
clear_opt(sbi->s_mount_opt, DELALLOC);
} else if (test_opt(sb, DELALLOC))
ext4_msg(sb, KERN_INFO, "delayed allocation enabled");
err = ext4_setup_system_zone(sb);
if (err) {
ext4_msg(sb, KERN_ERR, "failed to initialize system "
"zone (%d)\n", err);
goto failed_mount4;
}
ext4_ext_init(sb);
err = ext4_mb_init(sb, needs_recovery);
if (err) {
ext4_msg(sb, KERN_ERR, "failed to initalize mballoc (%d)",
err);
goto failed_mount4;
}
sbi->s_kobj.kset = ext4_kset;
init_completion(&sbi->s_kobj_unregister);
err = kobject_init_and_add(&sbi->s_kobj, &ext4_ktype, NULL,
"%s", sb->s_id);
if (err) {
ext4_mb_release(sb);
ext4_ext_release(sb);
goto failed_mount4;
};
EXT4_SB(sb)->s_mount_state |= EXT4_ORPHAN_FS;
ext4_orphan_cleanup(sb, es);
EXT4_SB(sb)->s_mount_state &= ~EXT4_ORPHAN_FS;
if (needs_recovery) {
ext4_msg(sb, KERN_INFO, "recovery complete");
ext4_mark_recovery_complete(sb, es);
}
if (EXT4_SB(sb)->s_journal) {
if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA)
descr = " journalled data mode";
else if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_ORDERED_DATA)
descr = " ordered data mode";
else
descr = " writeback data mode";
} else
descr = "out journal";
ext4_msg(sb, KERN_INFO, "mounted filesystem with%s", descr);
lock_kernel();
return 0;
cantfind_ext4:
if (!silent)
ext4_msg(sb, KERN_ERR, "VFS: Can't find ext4 filesystem");
goto failed_mount;
failed_mount4:
ext4_msg(sb, KERN_ERR, "mount failed");
ext4_release_system_zone(sb);
if (sbi->s_journal) {
jbd2_journal_destroy(sbi->s_journal);
sbi->s_journal = NULL;
}
failed_mount3:
if (sbi->s_flex_groups) {
if (is_vmalloc_addr(sbi->s_flex_groups))
vfree(sbi->s_flex_groups);
else
kfree(sbi->s_flex_groups);
}
percpu_counter_destroy(&sbi->s_freeblocks_counter);
percpu_counter_destroy(&sbi->s_freeinodes_counter);
percpu_counter_destroy(&sbi->s_dirs_counter);
percpu_counter_destroy(&sbi->s_dirtyblocks_counter);
failed_mount2:
for (i = 0; i < db_count; i++)
brelse(sbi->s_group_desc[i]);
kfree(sbi->s_group_desc);
failed_mount:
if (sbi->s_proc) {
remove_proc_entry(sb->s_id, ext4_proc_root);
}
#ifdef CONFIG_QUOTA
for (i = 0; i < MAXQUOTAS; i++)
kfree(sbi->s_qf_names[i]);
#endif
ext4_blkdev_remove(sbi);
brelse(bh);
out_fail:
sb->s_fs_info = NULL;
kfree(sbi->s_blockgroup_lock);
kfree(sbi);
lock_kernel();
return ret;
}
/*
* Setup any per-fs journal parameters now. We'll do this both on
* initial mount, once the journal has been initialised but before we've
* done any recovery; and again on any subsequent remount.
*/
static void ext4_init_journal_params(struct super_block *sb, journal_t *journal)
{
struct ext4_sb_info *sbi = EXT4_SB(sb);
journal->j_commit_interval = sbi->s_commit_interval;
journal->j_min_batch_time = sbi->s_min_batch_time;
journal->j_max_batch_time = sbi->s_max_batch_time;
spin_lock(&journal->j_state_lock);
if (test_opt(sb, BARRIER))
journal->j_flags |= JBD2_BARRIER;
else
journal->j_flags &= ~JBD2_BARRIER;
if (test_opt(sb, DATA_ERR_ABORT))
journal->j_flags |= JBD2_ABORT_ON_SYNCDATA_ERR;
else
journal->j_flags &= ~JBD2_ABORT_ON_SYNCDATA_ERR;
spin_unlock(&journal->j_state_lock);
}
static journal_t *ext4_get_journal(struct super_block *sb,
unsigned int journal_inum)
{
struct inode *journal_inode;
journal_t *journal;
BUG_ON(!EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL));
/* First, test for the existence of a valid inode on disk. Bad
* things happen if we iget() an unused inode, as the subsequent
* iput() will try to delete it. */
journal_inode = ext4_iget(sb, journal_inum);
if (IS_ERR(journal_inode)) {
ext4_msg(sb, KERN_ERR, "no journal found");
return NULL;
}
if (!journal_inode->i_nlink) {
make_bad_inode(journal_inode);
iput(journal_inode);
ext4_msg(sb, KERN_ERR, "journal inode is deleted");
return NULL;
}
jbd_debug(2, "Journal inode found at %p: %lld bytes\n",
journal_inode, journal_inode->i_size);
if (!S_ISREG(journal_inode->i_mode)) {
ext4_msg(sb, KERN_ERR, "invalid journal inode");
iput(journal_inode);
return NULL;
}
journal = jbd2_journal_init_inode(journal_inode);
if (!journal) {
ext4_msg(sb, KERN_ERR, "Could not load journal inode");
iput(journal_inode);
return NULL;
}
journal->j_private = sb;
ext4_init_journal_params(sb, journal);
return journal;
}
static journal_t *ext4_get_dev_journal(struct super_block *sb,
dev_t j_dev)
{
struct buffer_head *bh;
journal_t *journal;
ext4_fsblk_t start;
ext4_fsblk_t len;
int hblock, blocksize;
ext4_fsblk_t sb_block;
unsigned long offset;
struct ext4_super_block *es;
struct block_device *bdev;
BUG_ON(!EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL));
bdev = ext4_blkdev_get(j_dev, sb);
if (bdev == NULL)
return NULL;
if (bd_claim(bdev, sb)) {
ext4_msg(sb, KERN_ERR,
"failed to claim external journal device");
blkdev_put(bdev, FMODE_READ|FMODE_WRITE);
return NULL;
}
blocksize = sb->s_blocksize;
hblock = bdev_logical_block_size(bdev);
if (blocksize < hblock) {
ext4_msg(sb, KERN_ERR,
"blocksize too small for journal device");
goto out_bdev;
}
sb_block = EXT4_MIN_BLOCK_SIZE / blocksize;
offset = EXT4_MIN_BLOCK_SIZE % blocksize;
set_blocksize(bdev, blocksize);
if (!(bh = __bread(bdev, sb_block, blocksize))) {
ext4_msg(sb, KERN_ERR, "couldn't read superblock of "
"external journal");
goto out_bdev;
}
es = (struct ext4_super_block *) (((char *)bh->b_data) + offset);
if ((le16_to_cpu(es->s_magic) != EXT4_SUPER_MAGIC) ||
!(le32_to_cpu(es->s_feature_incompat) &
EXT4_FEATURE_INCOMPAT_JOURNAL_DEV)) {
ext4_msg(sb, KERN_ERR, "external journal has "
"bad superblock");
brelse(bh);
goto out_bdev;
}
if (memcmp(EXT4_SB(sb)->s_es->s_journal_uuid, es->s_uuid, 16)) {
ext4_msg(sb, KERN_ERR, "journal UUID does not match");
brelse(bh);
goto out_bdev;
}
len = ext4_blocks_count(es);
start = sb_block + 1;
brelse(bh); /* we're done with the superblock */
journal = jbd2_journal_init_dev(bdev, sb->s_bdev,
start, len, blocksize);
if (!journal) {
ext4_msg(sb, KERN_ERR, "failed to create device journal");
goto out_bdev;
}
journal->j_private = sb;
ll_rw_block(READ, 1, &journal->j_sb_buffer);
wait_on_buffer(journal->j_sb_buffer);
if (!buffer_uptodate(journal->j_sb_buffer)) {
ext4_msg(sb, KERN_ERR, "I/O error on journal device");
goto out_journal;
}
if (be32_to_cpu(journal->j_superblock->s_nr_users) != 1) {
ext4_msg(sb, KERN_ERR, "External journal has more than one "
"user (unsupported) - %d",
be32_to_cpu(journal->j_superblock->s_nr_users));
goto out_journal;
}
EXT4_SB(sb)->journal_bdev = bdev;
ext4_init_journal_params(sb, journal);
return journal;
out_journal:
jbd2_journal_destroy(journal);
out_bdev:
ext4_blkdev_put(bdev);
return NULL;
}
static int ext4_load_journal(struct super_block *sb,
struct ext4_super_block *es,
unsigned long journal_devnum)
{
journal_t *journal;
unsigned int journal_inum = le32_to_cpu(es->s_journal_inum);
dev_t journal_dev;
int err = 0;
int really_read_only;
BUG_ON(!EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL));
if (journal_devnum &&
journal_devnum != le32_to_cpu(es->s_journal_dev)) {
ext4_msg(sb, KERN_INFO, "external journal device major/minor "
"numbers have changed");
journal_dev = new_decode_dev(journal_devnum);
} else
journal_dev = new_decode_dev(le32_to_cpu(es->s_journal_dev));
really_read_only = bdev_read_only(sb->s_bdev);
/*
* Are we loading a blank journal or performing recovery after a
* crash? For recovery, we need to check in advance whether we
* can get read-write access to the device.
*/
if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER)) {
if (sb->s_flags & MS_RDONLY) {
ext4_msg(sb, KERN_INFO, "INFO: recovery "
"required on readonly filesystem");
if (really_read_only) {
ext4_msg(sb, KERN_ERR, "write access "
"unavailable, cannot proceed");
return -EROFS;
}
ext4_msg(sb, KERN_INFO, "write access will "
"be enabled during recovery");
}
}
if (journal_inum && journal_dev) {
ext4_msg(sb, KERN_ERR, "filesystem has both journal "
"and inode journals!");
return -EINVAL;
}
if (journal_inum) {
if (!(journal = ext4_get_journal(sb, journal_inum)))
return -EINVAL;
} else {
if (!(journal = ext4_get_dev_journal(sb, journal_dev)))
return -EINVAL;
}
if (journal->j_flags & JBD2_BARRIER)
ext4_msg(sb, KERN_INFO, "barriers enabled");
else
ext4_msg(sb, KERN_INFO, "barriers disabled");
if (!really_read_only && test_opt(sb, UPDATE_JOURNAL)) {
err = jbd2_journal_update_format(journal);
if (err) {
ext4_msg(sb, KERN_ERR, "error updating journal");
jbd2_journal_destroy(journal);
return err;
}
}
if (!EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER))
err = jbd2_journal_wipe(journal, !really_read_only);
if (!err)
err = jbd2_journal_load(journal);
if (err) {
ext4_msg(sb, KERN_ERR, "error loading journal");
jbd2_journal_destroy(journal);
return err;
}
EXT4_SB(sb)->s_journal = journal;
ext4_clear_journal_err(sb, es);
if (journal_devnum &&
journal_devnum != le32_to_cpu(es->s_journal_dev)) {
es->s_journal_dev = cpu_to_le32(journal_devnum);
/* Make sure we flush the recovery flag to disk. */
ext4_commit_super(sb, 1);
}
return 0;
}
static int ext4_commit_super(struct super_block *sb, int sync)
{
struct ext4_super_block *es = EXT4_SB(sb)->s_es;
struct buffer_head *sbh = EXT4_SB(sb)->s_sbh;
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 03:40:58 +03:00
int error = 0;
if (!sbh)
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 03:40:58 +03:00
return error;
if (buffer_write_io_error(sbh)) {
/*
* Oh, dear. A previous attempt to write the
* superblock failed. This could happen because the
* USB device was yanked out. Or it could happen to
* be a transient write error and maybe the block will
* be remapped. Nothing we can do but to retry the
* write and hope for the best.
*/
ext4_msg(sb, KERN_ERR, "previous I/O error to "
"superblock detected");
clear_buffer_write_io_error(sbh);
set_buffer_uptodate(sbh);
}
/*
* If the file system is mounted read-only, don't update the
* superblock write time. This avoids updating the superblock
* write time when we are mounting the root file system
* read/only but we need to replay the journal; at that point,
* for people who are east of GMT and who make their clock
* tick in localtime for Windows bug-for-bug compatibility,
* the clock is set in the future, and this will cause e2fsck
* to complain and force a full file system check.
*/
if (!(sb->s_flags & MS_RDONLY))
es->s_wtime = cpu_to_le32(get_seconds());
es->s_kbytes_written =
cpu_to_le64(EXT4_SB(sb)->s_kbytes_written +
((part_stat_read(sb->s_bdev->bd_part, sectors[1]) -
EXT4_SB(sb)->s_sectors_written_start) >> 1));
ext4_free_blocks_count_set(es, percpu_counter_sum_positive(
&EXT4_SB(sb)->s_freeblocks_counter));
es->s_free_inodes_count = cpu_to_le32(percpu_counter_sum_positive(
&EXT4_SB(sb)->s_freeinodes_counter));
sb->s_dirt = 0;
BUFFER_TRACE(sbh, "marking dirty");
mark_buffer_dirty(sbh);
if (sync) {
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 03:40:58 +03:00
error = sync_dirty_buffer(sbh);
if (error)
return error;
error = buffer_write_io_error(sbh);
if (error) {
ext4_msg(sb, KERN_ERR, "I/O error while writing "
"superblock");
clear_buffer_write_io_error(sbh);
set_buffer_uptodate(sbh);
}
}
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 03:40:58 +03:00
return error;
}
/*
* Have we just finished recovery? If so, and if we are mounting (or
* remounting) the filesystem readonly, then we will end up with a
* consistent fs on disk. Record that fact.
*/
static void ext4_mark_recovery_complete(struct super_block *sb,
struct ext4_super_block *es)
{
journal_t *journal = EXT4_SB(sb)->s_journal;
if (!EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) {
BUG_ON(journal != NULL);
return;
}
jbd2_journal_lock_updates(journal);
if (jbd2_journal_flush(journal) < 0)
goto out;
if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER) &&
sb->s_flags & MS_RDONLY) {
EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
ext4_commit_super(sb, 1);
}
out:
jbd2_journal_unlock_updates(journal);
}
/*
* If we are mounting (or read-write remounting) a filesystem whose journal
* has recorded an error from a previous lifetime, move that error to the
* main filesystem now.
*/
static void ext4_clear_journal_err(struct super_block *sb,
struct ext4_super_block *es)
{
journal_t *journal;
int j_errno;
const char *errstr;
BUG_ON(!EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL));
journal = EXT4_SB(sb)->s_journal;
/*
* Now check for any error status which may have been recorded in the
* journal by a prior ext4_error() or ext4_abort()
*/
j_errno = jbd2_journal_errno(journal);
if (j_errno) {
char nbuf[16];
errstr = ext4_decode_error(sb, j_errno, nbuf);
ext4_warning(sb, __func__, "Filesystem error recorded "
"from previous mount: %s", errstr);
ext4_warning(sb, __func__, "Marking fs in need of "
"filesystem check.");
EXT4_SB(sb)->s_mount_state |= EXT4_ERROR_FS;
es->s_state |= cpu_to_le16(EXT4_ERROR_FS);
ext4_commit_super(sb, 1);
jbd2_journal_clear_err(journal);
}
}
/*
* Force the running and committing transactions to commit,
* and wait on the commit.
*/
int ext4_force_commit(struct super_block *sb)
{
journal_t *journal;
int ret = 0;
if (sb->s_flags & MS_RDONLY)
return 0;
journal = EXT4_SB(sb)->s_journal;
if (journal)
ret = ext4_journal_force_commit(journal);
return ret;
}
static void ext4_write_super(struct super_block *sb)
{
lock_super(sb);
ext4_commit_super(sb, 1);
unlock_super(sb);
}
static int ext4_sync_fs(struct super_block *sb, int wait)
{
int ret = 0;
tid_t target;
trace_ext4_sync_fs(sb, wait);
if (jbd2_journal_start_commit(EXT4_SB(sb)->s_journal, &target)) {
if (wait)
jbd2_log_wait_commit(EXT4_SB(sb)->s_journal, target);
}
return ret;
}
/*
* LVM calls this function before a (read-only) snapshot is created. This
* gives us a chance to flush the journal completely and mark the fs clean.
*/
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 03:40:58 +03:00
static int ext4_freeze(struct super_block *sb)
{
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 03:40:58 +03:00
int error = 0;
journal_t *journal;
if (sb->s_flags & MS_RDONLY)
return 0;
journal = EXT4_SB(sb)->s_journal;
/* Now we set up the journal barrier. */
jbd2_journal_lock_updates(journal);
/*
* Don't clear the needs_recovery flag if we failed to flush
* the journal.
*/
error = jbd2_journal_flush(journal);
if (error < 0) {
out:
jbd2_journal_unlock_updates(journal);
return error;
}
/* Journal blocked and flushed, clear needs_recovery flag. */
EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
error = ext4_commit_super(sb, 1);
if (error)
goto out;
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 03:40:58 +03:00
return 0;
}
/*
* Called by LVM after the snapshot is done. We need to reset the RECOVER
* flag here, even though the filesystem is not technically dirty yet.
*/
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 03:40:58 +03:00
static int ext4_unfreeze(struct super_block *sb)
{
if (sb->s_flags & MS_RDONLY)
return 0;
lock_super(sb);
/* Reset the needs_recovery flag before the fs is unlocked. */
EXT4_SET_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
ext4_commit_super(sb, 1);
unlock_super(sb);
jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
filesystem freeze: add error handling of write_super_lockfs/unlockfs Currently, ext3 in mainline Linux doesn't have the freeze feature which suspends write requests. So, we cannot take a backup which keeps the filesystem's consistency with the storage device's features (snapshot and replication) while it is mounted. In many case, a commercial filesystem (e.g. VxFS) has the freeze feature and it would be used to get the consistent backup. If Linux's standard filesystem ext3 has the freeze feature, we can do it without a commercial filesystem. So I have implemented the ioctls of the freeze feature. I think we can take the consistent backup with the following steps. 1. Freeze the filesystem with the freeze ioctl. 2. Separate the replication volume or create the snapshot with the storage device's feature. 3. Unfreeze the filesystem with the unfreeze ioctl. 4. Take the backup from the separated replication volume or the snapshot. This patch: VFS: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they can return an error. Rename write_super_lockfs and unlockfs of the super block operation freeze_fs and unfreeze_fs to avoid a confusion. ext3, ext4, xfs, gfs2, jfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that write_super_lockfs returns an error if needed, and unlockfs always returns 0. reiserfs: Changed the type of write_super_lockfs and unlockfs from "void" to "int" so that they always return 0 (success) to keep a current behavior. Signed-off-by: Takashi Sato <t-sato@yk.jp.nec.com> Signed-off-by: Masayuki Hamaguchi <m-hamaguchi@ys.jp.nec.com> Cc: <xfs-masters@oss.sgi.com> Cc: <linux-ext4@vger.kernel.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Dave Chinner <david@fromorbit.com> Cc: Alasdair G Kergon <agk@redhat.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-01-10 03:40:58 +03:00
return 0;
}
static int ext4_remount(struct super_block *sb, int *flags, char *data)
{
struct ext4_super_block *es;
struct ext4_sb_info *sbi = EXT4_SB(sb);
ext4_fsblk_t n_blocks_count = 0;
unsigned long old_sb_flags;
struct ext4_mount_options old_opts;
ext4_group_t g;
unsigned int journal_ioprio = DEFAULT_JOURNAL_IOPRIO;
int err;
#ifdef CONFIG_QUOTA
int i;
#endif
lock_kernel();
/* Store the original options */
lock_super(sb);
old_sb_flags = sb->s_flags;
old_opts.s_mount_opt = sbi->s_mount_opt;
old_opts.s_resuid = sbi->s_resuid;
old_opts.s_resgid = sbi->s_resgid;
old_opts.s_commit_interval = sbi->s_commit_interval;
old_opts.s_min_batch_time = sbi->s_min_batch_time;
old_opts.s_max_batch_time = sbi->s_max_batch_time;
#ifdef CONFIG_QUOTA
old_opts.s_jquota_fmt = sbi->s_jquota_fmt;
for (i = 0; i < MAXQUOTAS; i++)
old_opts.s_qf_names[i] = sbi->s_qf_names[i];
#endif
if (sbi->s_journal && sbi->s_journal->j_task->io_context)
journal_ioprio = sbi->s_journal->j_task->io_context->ioprio;
/*
* Allow the "check" option to be passed as a remount option.
*/
if (!parse_options(data, sb, NULL, &journal_ioprio,
&n_blocks_count, 1)) {
err = -EINVAL;
goto restore_opts;
}
if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED)
ext4_abort(sb, __func__, "Abort forced by user");
sb->s_flags = (sb->s_flags & ~MS_POSIXACL) |
((sbi->s_mount_opt & EXT4_MOUNT_POSIX_ACL) ? MS_POSIXACL : 0);
es = sbi->s_es;
if (sbi->s_journal) {
ext4_init_journal_params(sb, sbi->s_journal);
set_task_ioprio(sbi->s_journal->j_task, journal_ioprio);
}
if ((*flags & MS_RDONLY) != (sb->s_flags & MS_RDONLY) ||
n_blocks_count > ext4_blocks_count(es)) {
if (sbi->s_mount_flags & EXT4_MF_FS_ABORTED) {
err = -EROFS;
goto restore_opts;
}
if (*flags & MS_RDONLY) {
/*
* First of all, the unconditional stuff we have to do
* to disable replay of the journal when we next remount
*/
sb->s_flags |= MS_RDONLY;
/*
* OK, test if we are remounting a valid rw partition
* readonly, and if so set the rdonly flag and then
* mark the partition as valid again.
*/
if (!(es->s_state & cpu_to_le16(EXT4_VALID_FS)) &&
(sbi->s_mount_state & EXT4_VALID_FS))
es->s_state = cpu_to_le16(sbi->s_mount_state);
if (sbi->s_journal)
ext4_mark_recovery_complete(sb, es);
} else {
/* Make sure we can mount this feature set readwrite */
if (!ext4_feature_set_ok(sb, 0)) {
err = -EROFS;
goto restore_opts;
}
/*
* Make sure the group descriptor checksums
* are sane. If they aren't, refuse to remount r/w.
*/
for (g = 0; g < sbi->s_groups_count; g++) {
struct ext4_group_desc *gdp =
ext4_get_group_desc(sb, g, NULL);
if (!ext4_group_desc_csum_verify(sbi, g, gdp)) {
ext4_msg(sb, KERN_ERR,
"ext4_remount: Checksum for group %u failed (%u!=%u)",
g, le16_to_cpu(ext4_group_desc_csum(sbi, g, gdp)),
le16_to_cpu(gdp->bg_checksum));
err = -EINVAL;
goto restore_opts;
}
}
/*
* If we have an unprocessed orphan list hanging
* around from a previously readonly bdev mount,
* require a full umount/remount for now.
*/
if (es->s_last_orphan) {
ext4_msg(sb, KERN_WARNING, "Couldn't "
"remount RDWR because of unprocessed "
"orphan inode list. Please "
"umount/remount instead");
err = -EINVAL;
goto restore_opts;
}
/*
* Mounting a RDONLY partition read-write, so reread
* and store the current valid flag. (It may have
* been changed by e2fsck since we originally mounted
* the partition.)
*/
if (sbi->s_journal)
ext4_clear_journal_err(sb, es);
sbi->s_mount_state = le16_to_cpu(es->s_state);
if ((err = ext4_group_extend(sb, es, n_blocks_count)))
goto restore_opts;
if (!ext4_setup_super(sb, es, 0))
sb->s_flags &= ~MS_RDONLY;
}
}
ext4_setup_system_zone(sb);
if (sbi->s_journal == NULL)
ext4_commit_super(sb, 1);
#ifdef CONFIG_QUOTA
/* Release old quota file names */
for (i = 0; i < MAXQUOTAS; i++)
if (old_opts.s_qf_names[i] &&
old_opts.s_qf_names[i] != sbi->s_qf_names[i])
kfree(old_opts.s_qf_names[i]);
#endif
unlock_super(sb);
unlock_kernel();
return 0;
restore_opts:
sb->s_flags = old_sb_flags;
sbi->s_mount_opt = old_opts.s_mount_opt;
sbi->s_resuid = old_opts.s_resuid;
sbi->s_resgid = old_opts.s_resgid;
sbi->s_commit_interval = old_opts.s_commit_interval;
sbi->s_min_batch_time = old_opts.s_min_batch_time;
sbi->s_max_batch_time = old_opts.s_max_batch_time;
#ifdef CONFIG_QUOTA
sbi->s_jquota_fmt = old_opts.s_jquota_fmt;
for (i = 0; i < MAXQUOTAS; i++) {
if (sbi->s_qf_names[i] &&
old_opts.s_qf_names[i] != sbi->s_qf_names[i])
kfree(sbi->s_qf_names[i]);
sbi->s_qf_names[i] = old_opts.s_qf_names[i];
}
#endif
unlock_super(sb);
unlock_kernel();
return err;
}
static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf)
{
struct super_block *sb = dentry->d_sb;
struct ext4_sb_info *sbi = EXT4_SB(sb);
struct ext4_super_block *es = sbi->s_es;
u64 fsid;
if (test_opt(sb, MINIX_DF)) {
sbi->s_overhead_last = 0;
} else if (sbi->s_blocks_last != ext4_blocks_count(es)) {
ext4_group_t i, ngroups = ext4_get_groups_count(sb);
ext4_fsblk_t overhead = 0;
/*
* Compute the overhead (FS structures). This is constant
* for a given filesystem unless the number of block groups
* changes so we cache the previous value until it does.
*/
/*
* All of the blocks before first_data_block are
* overhead
*/
overhead = le32_to_cpu(es->s_first_data_block);
/*
* Add the overhead attributed to the superblock and
* block group descriptors. If the sparse superblocks
* feature is turned on, then not all groups have this.
*/
for (i = 0; i < ngroups; i++) {
overhead += ext4_bg_has_super(sb, i) +
ext4_bg_num_gdb(sb, i);
cond_resched();
}
/*
* Every block group has an inode bitmap, a block
* bitmap, and an inode table.
*/
overhead += ngroups * (2 + sbi->s_itb_per_group);
sbi->s_overhead_last = overhead;
smp_wmb();
sbi->s_blocks_last = ext4_blocks_count(es);
}
buf->f_type = EXT4_SUPER_MAGIC;
buf->f_bsize = sb->s_blocksize;
buf->f_blocks = ext4_blocks_count(es) - sbi->s_overhead_last;
buf->f_bfree = percpu_counter_sum_positive(&sbi->s_freeblocks_counter) -
percpu_counter_sum_positive(&sbi->s_dirtyblocks_counter);
ext4_free_blocks_count_set(es, buf->f_bfree);
buf->f_bavail = buf->f_bfree - ext4_r_blocks_count(es);
if (buf->f_bfree < ext4_r_blocks_count(es))
buf->f_bavail = 0;
buf->f_files = le32_to_cpu(es->s_inodes_count);
buf->f_ffree = percpu_counter_sum_positive(&sbi->s_freeinodes_counter);
es->s_free_inodes_count = cpu_to_le32(buf->f_ffree);
buf->f_namelen = EXT4_NAME_LEN;
fsid = le64_to_cpup((void *)es->s_uuid) ^
le64_to_cpup((void *)es->s_uuid + sizeof(u64));
buf->f_fsid.val[0] = fsid & 0xFFFFFFFFUL;
buf->f_fsid.val[1] = (fsid >> 32) & 0xFFFFFFFFUL;
return 0;
}
/* Helper function for writing quotas on sync - we need to start transaction
* before quota file is locked for write. Otherwise the are possible deadlocks:
* Process 1 Process 2
* ext4_create() quota_sync()
* jbd2_journal_start() write_dquot()
* vfs_dq_init() down(dqio_mutex)
* down(dqio_mutex) jbd2_journal_start()
*
*/
#ifdef CONFIG_QUOTA
static inline struct inode *dquot_to_inode(struct dquot *dquot)
{
return sb_dqopt(dquot->dq_sb)->files[dquot->dq_type];
}
static int ext4_write_dquot(struct dquot *dquot)
{
int ret, err;
handle_t *handle;
struct inode *inode;
inode = dquot_to_inode(dquot);
handle = ext4_journal_start(inode,
EXT4_QUOTA_TRANS_BLOCKS(dquot->dq_sb));
if (IS_ERR(handle))
return PTR_ERR(handle);
ret = dquot_commit(dquot);
err = ext4_journal_stop(handle);
if (!ret)
ret = err;
return ret;
}
static int ext4_acquire_dquot(struct dquot *dquot)
{
int ret, err;
handle_t *handle;
handle = ext4_journal_start(dquot_to_inode(dquot),
EXT4_QUOTA_INIT_BLOCKS(dquot->dq_sb));
if (IS_ERR(handle))
return PTR_ERR(handle);
ret = dquot_acquire(dquot);
err = ext4_journal_stop(handle);
if (!ret)
ret = err;
return ret;
}
static int ext4_release_dquot(struct dquot *dquot)
{
int ret, err;
handle_t *handle;
handle = ext4_journal_start(dquot_to_inode(dquot),
EXT4_QUOTA_DEL_BLOCKS(dquot->dq_sb));
if (IS_ERR(handle)) {
/* Release dquot anyway to avoid endless cycle in dqput() */
dquot_release(dquot);
return PTR_ERR(handle);
}
ret = dquot_release(dquot);
err = ext4_journal_stop(handle);
if (!ret)
ret = err;
return ret;
}
static int ext4_mark_dquot_dirty(struct dquot *dquot)
{
/* Are we journaling quotas? */
if (EXT4_SB(dquot->dq_sb)->s_qf_names[USRQUOTA] ||
EXT4_SB(dquot->dq_sb)->s_qf_names[GRPQUOTA]) {
dquot_mark_dquot_dirty(dquot);
return ext4_write_dquot(dquot);
} else {
return dquot_mark_dquot_dirty(dquot);
}
}
static int ext4_write_info(struct super_block *sb, int type)
{
int ret, err;
handle_t *handle;
/* Data block + inode block */
handle = ext4_journal_start(sb->s_root->d_inode, 2);
if (IS_ERR(handle))
return PTR_ERR(handle);
ret = dquot_commit_info(sb, type);
err = ext4_journal_stop(handle);
if (!ret)
ret = err;
return ret;
}
/*
* Turn on quotas during mount time - we need to find
* the quota file and such...
*/
static int ext4_quota_on_mount(struct super_block *sb, int type)
{
return vfs_quota_on_mount(sb, EXT4_SB(sb)->s_qf_names[type],
EXT4_SB(sb)->s_jquota_fmt, type);
}
/*
* Standard function to be called on quota_on
*/
static int ext4_quota_on(struct super_block *sb, int type, int format_id,
char *name, int remount)
{
int err;
struct path path;
if (!test_opt(sb, QUOTA))
return -EINVAL;
/* When remounting, no checks are needed and in fact, name is NULL */
if (remount)
return vfs_quota_on(sb, type, format_id, name, remount);
err = kern_path(name, LOOKUP_FOLLOW, &path);
if (err)
return err;
/* Quotafile not on the same filesystem? */
if (path.mnt->mnt_sb != sb) {
path_put(&path);
return -EXDEV;
}
/* Journaling quota? */
if (EXT4_SB(sb)->s_qf_names[type]) {
/* Quotafile not in fs root? */
if (path.dentry->d_parent != sb->s_root)
ext4_msg(sb, KERN_WARNING,
"Quota file not on filesystem root. "
"Journaled quota will not work");
}
/*
* When we journal data on quota file, we have to flush journal to see
* all updates to the file when we bypass pagecache...
*/
if (EXT4_SB(sb)->s_journal &&
ext4_should_journal_data(path.dentry->d_inode)) {
/*
* We don't need to lock updates but journal_flush() could
* otherwise be livelocked...
*/
jbd2_journal_lock_updates(EXT4_SB(sb)->s_journal);
err = jbd2_journal_flush(EXT4_SB(sb)->s_journal);
jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
if (err) {
path_put(&path);
return err;
}
}
err = vfs_quota_on_path(sb, type, format_id, &path);
path_put(&path);
return err;
}
/* Read data from quotafile - avoid pagecache and such because we cannot afford
* acquiring the locks... As quota files are never truncated and quota code
* itself serializes the operations (and noone else should touch the files)
* we don't have to be afraid of races */
static ssize_t ext4_quota_read(struct super_block *sb, int type, char *data,
size_t len, loff_t off)
{
struct inode *inode = sb_dqopt(sb)->files[type];
ext4_lblk_t blk = off >> EXT4_BLOCK_SIZE_BITS(sb);
int err = 0;
int offset = off & (sb->s_blocksize - 1);
int tocopy;
size_t toread;
struct buffer_head *bh;
loff_t i_size = i_size_read(inode);
if (off > i_size)
return 0;
if (off+len > i_size)
len = i_size-off;
toread = len;
while (toread > 0) {
tocopy = sb->s_blocksize - offset < toread ?
sb->s_blocksize - offset : toread;
bh = ext4_bread(NULL, inode, blk, 0, &err);
if (err)
return err;
if (!bh) /* A hole? */
memset(data, 0, tocopy);
else
memcpy(data, bh->b_data+offset, tocopy);
brelse(bh);
offset = 0;
toread -= tocopy;
data += tocopy;
blk++;
}
return len;
}
/* Write to quotafile (we know the transaction is already started and has
* enough credits) */
static ssize_t ext4_quota_write(struct super_block *sb, int type,
const char *data, size_t len, loff_t off)
{
struct inode *inode = sb_dqopt(sb)->files[type];
ext4_lblk_t blk = off >> EXT4_BLOCK_SIZE_BITS(sb);
int err = 0;
int offset = off & (sb->s_blocksize - 1);
int tocopy;
int journal_quota = EXT4_SB(sb)->s_qf_names[type] != NULL;
size_t towrite = len;
struct buffer_head *bh;
handle_t *handle = journal_current_handle();
if (EXT4_SB(sb)->s_journal && !handle) {
ext4_msg(sb, KERN_WARNING, "Quota write (off=%llu, len=%llu)"
" cancelled because transaction is not started",
(unsigned long long)off, (unsigned long long)len);
return -EIO;
}
mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
while (towrite > 0) {
tocopy = sb->s_blocksize - offset < towrite ?
sb->s_blocksize - offset : towrite;
bh = ext4_bread(handle, inode, blk, 1, &err);
if (!bh)
goto out;
if (journal_quota) {
err = ext4_journal_get_write_access(handle, bh);
if (err) {
brelse(bh);
goto out;
}
}
lock_buffer(bh);
memcpy(bh->b_data+offset, data, tocopy);
flush_dcache_page(bh->b_page);
unlock_buffer(bh);
if (journal_quota)
err = ext4_handle_dirty_metadata(handle, NULL, bh);
else {
/* Always do at least ordered writes for quotas */
err = ext4_jbd2_file_inode(handle, inode);
mark_buffer_dirty(bh);
}
brelse(bh);
if (err)
goto out;
offset = 0;
towrite -= tocopy;
data += tocopy;
blk++;
}
out:
if (len == towrite) {
mutex_unlock(&inode->i_mutex);
return err;
}
if (inode->i_size < off+len-towrite) {
i_size_write(inode, off+len-towrite);
EXT4_I(inode)->i_disksize = inode->i_size;
}
inode->i_mtime = inode->i_ctime = CURRENT_TIME;
ext4_mark_inode_dirty(handle, inode);
mutex_unlock(&inode->i_mutex);
return len - towrite;
}
#endif
static int ext4_get_sb(struct file_system_type *fs_type, int flags,
const char *dev_name, void *data, struct vfsmount *mnt)
{
return get_sb_bdev(fs_type, flags, dev_name, data, ext4_fill_super,mnt);
}
static struct file_system_type ext4_fs_type = {
.owner = THIS_MODULE,
.name = "ext4",
.get_sb = ext4_get_sb,
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV,
};
#ifdef CONFIG_EXT4DEV_COMPAT
static int ext4dev_get_sb(struct file_system_type *fs_type, int flags,
const char *dev_name, void *data,struct vfsmount *mnt)
{
printk(KERN_WARNING "EXT4-fs (%s): Update your userspace programs "
"to mount using ext4\n", dev_name);
printk(KERN_WARNING "EXT4-fs (%s): ext4dev backwards compatibility "
"will go away by 2.6.31\n", dev_name);
return get_sb_bdev(fs_type, flags, dev_name, data, ext4_fill_super,mnt);
}
static struct file_system_type ext4dev_fs_type = {
.owner = THIS_MODULE,
.name = "ext4dev",
.get_sb = ext4dev_get_sb,
.kill_sb = kill_block_super,
.fs_flags = FS_REQUIRES_DEV,
};
MODULE_ALIAS("ext4dev");
#endif
static int __init init_ext4_fs(void)
{
int err;
err = init_ext4_system_zone();
if (err)
return err;
ext4_kset = kset_create_and_add("ext4", NULL, fs_kobj);
if (!ext4_kset)
goto out4;
ext4_proc_root = proc_mkdir("fs/ext4", NULL);
err = init_ext4_mballoc();
if (err)
goto out3;
err = init_ext4_xattr();
if (err)
goto out2;
err = init_inodecache();
if (err)
goto out1;
err = register_filesystem(&ext4_fs_type);
if (err)
goto out;
#ifdef CONFIG_EXT4DEV_COMPAT
err = register_filesystem(&ext4dev_fs_type);
if (err) {
unregister_filesystem(&ext4_fs_type);
goto out;
}
#endif
return 0;
out:
destroy_inodecache();
out1:
exit_ext4_xattr();
out2:
exit_ext4_mballoc();
out3:
remove_proc_entry("fs/ext4", NULL);
kset_unregister(ext4_kset);
out4:
exit_ext4_system_zone();
return err;
}
static void __exit exit_ext4_fs(void)
{
unregister_filesystem(&ext4_fs_type);
#ifdef CONFIG_EXT4DEV_COMPAT
unregister_filesystem(&ext4dev_fs_type);
#endif
destroy_inodecache();
exit_ext4_xattr();
exit_ext4_mballoc();
remove_proc_entry("fs/ext4", NULL);
kset_unregister(ext4_kset);
exit_ext4_system_zone();
}
MODULE_AUTHOR("Remy Card, Stephen Tweedie, Andrew Morton, Andreas Dilger, Theodore Ts'o and others");
MODULE_DESCRIPTION("Fourth Extended Filesystem");
MODULE_LICENSE("GPL");
module_init(init_ext4_fs)
module_exit(exit_ext4_fs)