WSL2-Linux-Kernel/drivers/iommu/irq_remapping.h

60 строки
1.4 KiB
C
Исходник Обычный вид История

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
* Author: Joerg Roedel <jroedel@suse.de>
*
* This header file contains stuff that is shared between different interrupt
* remapping drivers but with no need to be visible outside of the IOMMU layer.
*/
#ifndef __IRQ_REMAPPING_H
#define __IRQ_REMAPPING_H
#ifdef CONFIG_IRQ_REMAP
struct irq_data;
struct msi_msg;
irq_remapping: Introduce new interfaces to support hierarchical irqdomains Introduce new interfaces for interrupt remapping drivers to support hierarchical irqdomains: 1) irq_remapping_get_ir_irq_domain(): get irqdomain associated with an interrupt remapping unit. IOAPIC/HPET drivers use this interface to get parent interrupt remapping irqdomain. 2) irq_remapping_get_irq_domain(): get irqdomain for an IRQ allocation. This is mainly used to support MSI irqdomain. We must build one MSI irqdomain for each interrupt remapping unit. MSI driver calls this interface to get MSI irqdomain associated with an IR irqdomain which manages the PCI devices. In a further step we will store the irqdomain pointer in the device struct to avoid this call in the irq allocation path. Architecture specific hooks: 1) arch_get_ir_parent_domain(): get parent irqdomain for IR irqdomain, which is x86_vector_domain on x86 platforms. 2) arch_create_msi_irq_domain(): create an MSI irqdomain associated with the interrupt remapping unit. We also add following callbacks into struct irq_remap_ops: struct irq_domain *(*get_ir_irq_domain)(struct irq_alloc_info *); struct irq_domain *(*get_irq_domain)(struct irq_alloc_info *); Once all clients of IR have been converted to the new hierarchical irqdomain interfaces, we will: 1) Remove set_ioapic_entry, set_affinity, free_irq, compose_msi_msg, msi_alloc_irq, msi_setup_irq, setup_hpet_msi from struct remap_osp 2) Remove setup_ioapic_remapped_entry, free_remapped_irq, compose_remapped_msi_msg, setup_hpet_msi_remapped, setup_remapped_irq. 3) Simplify x86_io_apic_ops and x86_msi. We can achieve a way clearer architecture with all these changes applied. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Joerg Roedel <jroedel@suse.de> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: David Cohen <david.a.cohen@linux.intel.com> Cc: Sander Eikelenboom <linux@eikelenboom.it> Cc: David Vrabel <david.vrabel@citrix.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: iommu@lists.linux-foundation.org Cc: Bjorn Helgaas <bhelgaas@google.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Dimitri Sivanich <sivanich@sgi.com> Cc: Joerg Roedel <joro@8bytes.org> Link: http://lkml.kernel.org/r/1428905519-23704-9-git-send-email-jiang.liu@linux.intel.com Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-04-13 09:11:30 +03:00
struct irq_domain;
struct irq_alloc_info;
iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets A few years back intel published a spec update: http://www.intel.com/content/dam/doc/specification-update/5520-and-5500-chipset-ioh-specification-update.pdf For the 5520 and 5500 chipsets which contained an errata (specificially errata 53), which noted that these chipsets can't properly do interrupt remapping, and as a result the recommend that interrupt remapping be disabled in bios. While many vendors have a bios update to do exactly that, not all do, and of course not all users update their bios to a level that corrects the problem. As a result, occasionally interrupts can arrive at a cpu even after affinity for that interrupt has be moved, leading to lost or spurrious interrupts (usually characterized by the message: kernel: do_IRQ: 7.71 No irq handler for vector (irq -1) There have been several incidents recently of people seeing this error, and investigation has shown that they have system for which their BIOS level is such that this feature was not properly turned off. As such, it would be good to give them a reminder that their systems are vulnurable to this problem. For details of those that reported the problem, please see: https://bugzilla.redhat.com/show_bug.cgi?id=887006 [ Joerg: Removed CONFIG_IRQ_REMAP ifdef from early-quirks.c ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Prarit Bhargava <prarit@redhat.com> CC: Don Zickus <dzickus@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Asit Mallick <asit.k.mallick@intel.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-pci@vger.kernel.org CC: Joerg Roedel <joro@8bytes.org> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-04-17 00:38:32 +04:00
extern int irq_remap_broken;
extern int disable_sourceid_checking;
extern int no_x2apic_optout;
extern int irq_remapping_enabled;
extern int disable_irq_post;
struct irq_remap_ops {
/* The supported capabilities */
int capability;
/* Initializes hardware and makes it ready for remapping interrupts */
int (*prepare)(void);
/* Enables the remapping hardware */
int (*enable)(void);
/* Disables the remapping hardware */
void (*disable)(void);
/* Reenables the remapping hardware */
int (*reenable)(int);
/* Enable fault handling */
int (*enable_faulting)(void);
};
extern struct irq_remap_ops intel_irq_remap_ops;
extern struct irq_remap_ops amd_iommu_irq_ops;
extern struct irq_remap_ops hyperv_irq_remap_ops;
#else /* CONFIG_IRQ_REMAP */
#define irq_remapping_enabled 0
iommu/vt-d: add quirk for broken interrupt remapping on 55XX chipsets A few years back intel published a spec update: http://www.intel.com/content/dam/doc/specification-update/5520-and-5500-chipset-ioh-specification-update.pdf For the 5520 and 5500 chipsets which contained an errata (specificially errata 53), which noted that these chipsets can't properly do interrupt remapping, and as a result the recommend that interrupt remapping be disabled in bios. While many vendors have a bios update to do exactly that, not all do, and of course not all users update their bios to a level that corrects the problem. As a result, occasionally interrupts can arrive at a cpu even after affinity for that interrupt has be moved, leading to lost or spurrious interrupts (usually characterized by the message: kernel: do_IRQ: 7.71 No irq handler for vector (irq -1) There have been several incidents recently of people seeing this error, and investigation has shown that they have system for which their BIOS level is such that this feature was not properly turned off. As such, it would be good to give them a reminder that their systems are vulnurable to this problem. For details of those that reported the problem, please see: https://bugzilla.redhat.com/show_bug.cgi?id=887006 [ Joerg: Removed CONFIG_IRQ_REMAP ifdef from early-quirks.c ] Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Prarit Bhargava <prarit@redhat.com> CC: Don Zickus <dzickus@redhat.com> CC: Don Dutile <ddutile@redhat.com> CC: Bjorn Helgaas <bhelgaas@google.com> CC: Asit Mallick <asit.k.mallick@intel.com> CC: David Woodhouse <dwmw2@infradead.org> CC: linux-pci@vger.kernel.org CC: Joerg Roedel <joro@8bytes.org> CC: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> CC: Arkadiusz Miśkiewicz <arekm@maven.pl> Signed-off-by: Joerg Roedel <joro@8bytes.org>
2013-04-17 00:38:32 +04:00
#define irq_remap_broken 0
#define disable_irq_post 1
#endif /* CONFIG_IRQ_REMAP */
#endif /* __IRQ_REMAPPING_H */