microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/dma/Makefile

75 строки
2.6 KiB
Makefile
Исходник Обычный вид История

dmaengine: sort the makefile dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 11:13:14 +03:00
#dmaengine debug flags
dmaengine: inherit debug settings from the subsystem for subdirectories To be able to see debug messages during boot, enable the debug settings from Kconfig also for drivers in subdirectories. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-07-15 00:47:26 +04:00
subdir-ccflags-$(CONFIG_DMADEVICES_DEBUG) := -DDEBUG
subdir-ccflags-$(CONFIG_DMADEVICES_VDEBUG) += -DVERBOSE_DEBUG
Debugging options for the DMA engine subsystem This adds Kconfig options for DEBUG and VERBOSE_DEBUG to the DMA engine subsystem, I got tired of editing the Makefile manually each time I want to debug things in here, modelled this on the debug switches for other subsystems and works like a charm when working on our DMA engines. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-02-10 00:34:54 +03:00
dmaengine: sort the makefile dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 11:13:14 +03:00
#core
[I/OAT]: Utility functions for offloading sk_buff to iovec copies Provides for pinning user space pages in memory, copying to iovecs, and copying from sk_buffs including fragmented and chained sk_buffs. Signed-off-by: Chris Leech <christopher.leech@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-05-24 04:50:37 +04:00
obj-$(CONFIG_DMA_ENGINE) += dmaengine.o
dmaengine: split out virtual channel DMA support from sa11x0 driver Split the virtual slave channel DMA support from the sa11x0 driver so this code can be shared with other slave DMA engine drivers. Acked-by: Linus Walleij <linus.walleij@linaro.org> Tested-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-04-13 15:07:23 +04:00
obj-$(CONFIG_DMA_VIRTUAL_CHANNELS) += virt-dma.o
dma: acpi-dma: introduce ACPI DMA helpers There is a new generic API to get a DMA channel for a slave device (commit 9a6cecc8 "dmaengine: add helper function to request a slave DMA channel"). In similar fashion to the DT case (commit aa3da644 "of: Add generic device tree DMA helpers") we introduce helpers to the DMAC drivers which are enumerated by ACPI. The proposed extension provides the following API calls: acpi_dma_controller_register(), devm_acpi_dma_controller_register() acpi_dma_controller_free(), devm_acpi_dma_controller_free() acpi_dma_simple_xlate() acpi_dma_request_slave_chan_by_index() acpi_dma_request_slave_chan_by_name() The first two should be used, for example, at probe() and remove() of the corresponding DMAC driver. At the register stage the DMAC driver supplies a custom xlate() function to translate a struct dma_spec into struct dma_chan. Accordingly to the ACPI Fixed DMA resource specification the only two pieces of information the slave device has are the channel id and the request line (slave id). Those two are represented by struct dma_spec. The acpi_dma_request_slave_chan_by_index() provides access to the specifix FixedDMA resource by its index. Whereas dma_request_slave_channel() takes a string parameter to identify the DMA resources required by the slave device. To make a slave device driver work with both DeviceTree and ACPI enumeration a simple convention is established: "tx" corresponds to the index 0 and "rx" to the index 1. In case of robust configuration the slave device driver unfortunately needs to call acpi_dma_request_slave_chan_by_index() directly. Additionally the patch provides "managed" version of the register/free pair i.e. devm_acpi_dma_controller_register() and devm_acpi_dma_controller_free(). Usually, the driver uses only devm_acpi_dma_controller_register(). Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-04-09 15:05:43 +04:00
obj-$(CONFIG_DMA_ACPI) += acpi-dma.o
dmaengine: move drivers/of/dma.c -> drivers/dma/of-dma.c as requested by Rob Suggested-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-02-12 21:15:02 +04:00
obj-$(CONFIG_DMA_OF) += of-dma.o
dmaengine: sort the makefile dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 11:13:14 +03:00
#dmatest
dmatest: Simple DMA memcpy test client This client tests DMA memcpy using various lengths and various offsets into the source and destination buffers. It will initialize both buffers with a repeatable pattern and verify that the DMA engine copies the requested region and nothing more. It will also verify that the bytes aren't swapped around, and that the source buffer isn't modified. The dmatest module can be configured to test a specific device, a specific channel. It can also test multiple channels at the same time, and it can start multiple threads competing for the same channel. Changes since v2: * Support testing multiple channels at the same time * Support testing with multiple threads competing for the same channel * Use counting test patterns in order to catch byte ordering issues Changes since v1: * Remove extra dashes around "help" * Remove "default n" from Kconfig * Turn TEST_BUF_SIZE into a module parameter * Return DMA_NAK instead of DMA_DUP * Print unhandled events * Support testing specific channels and devices * Move to the end of the Makefile Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2008-07-08 22:58:45 +04:00
obj-$(CONFIG_DMATEST) += dmatest.o
dmaengine: sort the makefile dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 11:13:14 +03:00
#devices
obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o
obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/
dmaengine: at_hdmac: new driver for the Atmel AHB DMA Controller This AHB DMA Controller (aka HDMA or DMAC on AT91 systems) is availlable on at91sam9rl chip. It will be used on other products in the future. This first release covers only the memory-to-memory tranfer type. This is the only tranfer type supported by this chip. On other products, it will be used also for peripheral DMA transfer (slave API support to come). I used dmatest client without problem in different configurations to test it. Full documentation for this controller can be found in the SAM9RL datasheet: http://www.atmel.com/dyn/products/product_card.asp?part_id=4243 Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-07-03 21:24:33 +04:00
obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
dmaengine: at_xdmac: creation of the atmel eXtended DMA Controller driver New atmel DMA controller known as XDMAC, introduced with SAMA5D4 devices. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2014-10-22 19:22:18 +04:00
obj-$(CONFIG_AT_XDMAC) += at_xdmac.o
dmaengine: sort the makefile dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 11:13:14 +03:00
obj-$(CONFIG_AXI_DMAC) += dma-axi-dmac.o
dmaengine: Add Broadcom SBA RAID driver The Broadcom stream buffer accelerator (SBA) provides offloading capabilities for RAID operations. This SBA offload engine is accessible via Broadcom SoC specific ring manager. This patch adds Broadcom SBA RAID driver which provides one DMA device with RAID capabilities using one or more Broadcom SoC specific ring manager channels. The SBA RAID driver in its current shape implements memcpy, xor, and pq operations. Signed-off-by: Anup Patel <anup.patel@broadcom.com> Reviewed-by: Ray Jui <ray.jui@broadcom.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2017-05-15 08:04:54 +03:00
obj-$(CONFIG_BCM_SBA_RAID) += bcm-sba-raid.o
Add COH 901 318 DMA block driver v5 This patch adds support for the ST-Ericsson COH 901 318 DMA block, found in the U300 series platforms. It registers a DMA slave for device I/O and also a memcpy slave for memcpy. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Maciej Sosnowski <maciej.sosnowski@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2009-11-19 21:49:17 +03:00
obj-$(CONFIG_COH901318) += coh901318.o coh901318_lli.o
dmaengine: sort the makefile dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 11:13:14 +03:00
obj-$(CONFIG_DMA_BCM2835) += bcm2835-dma.o
obj-$(CONFIG_DMA_JZ4740) += dma-jz4740.o
obj-$(CONFIG_DMA_JZ4780) += dma-jz4780.o
obj-$(CONFIG_DMA_OMAP) += omap-dma.o
obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o
obj-$(CONFIG_DMA_SUN4I) += sun4i-dma.o
obj-$(CONFIG_DMA_SUN6I) += sun6i-dma.o
obj-$(CONFIG_DW_DMAC_CORE) += dw/
obj-$(CONFIG_EP93XX_DMA) += ep93xx_dma.o
obj-$(CONFIG_FSL_DMA) += fsldma.o
obj-$(CONFIG_FSL_EDMA) += fsl-edma.o
obj-$(CONFIG_FSL_RAID) += fsl_raid.o
obj-$(CONFIG_HSU_DMA) += hsu/
obj-$(CONFIG_IMG_MDC_DMA) += img-mdc-dma.o
dmaengine: Add Freescale i.MX1/21/27 DMA driver This driver is currently implemented as a user to the old i.MX DMA API. This allows us to convert each user of the old API to the dmaengine API one by one. Once this is done the old DMA driver can be merged into the i.MX dmaengine driver. V2: remove some debug leftovers and unused variables Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-10-06 12:25:55 +04:00
obj-$(CONFIG_IMX_DMA) += imx-dma.o
dmaengine: sort the makefile dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 11:13:14 +03:00
obj-$(CONFIG_IMX_SDMA) += imx-sdma.o
dmaengine: idma: rename to INTEL_IDMA64 the symbol CONFIG_IDMA64 should rather be CONFIG_INTEL_IDMA64 to conform to rest of the intel dmaengine drivers. This was found after sorting the entries and trying to place this odd one Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-09-21 19:48:45 +03:00
obj-$(CONFIG_INTEL_IDMA64) += idma64.o
dmaengine: sort the makefile dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 11:13:14 +03:00
obj-$(CONFIG_INTEL_IOATDMA) += ioat/
obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
obj-$(CONFIG_INTEL_MIC_X100_DMA) += mic_x100_dma.o
obj-$(CONFIG_K3_DMA) += k3dma.o
obj-$(CONFIG_LPC18XX_DMAMUX) += lpc18xx-dmamux.o
obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o
obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o
obj-$(CONFIG_MOXART_DMA) += moxart-dma.o
obj-$(CONFIG_MPC512X_DMA) += mpc512x_dma.o
obj-$(CONFIG_MV_XOR) += mv_xor.o
dmaengine: mv_xor_v2: new driver The new mv_xor_v2 driver supports the XOR engines found in the 64-bits ARM from Marvell of the Armada 7K and Armada 8K family. This XOR engine is a completely new hardware block, entirely different from the one used on previous Marvell Armada platforms, which use the existing mv_xor driver. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-06-16 15:28:34 +03:00
obj-$(CONFIG_MV_XOR_V2) += mv_xor_v2.o
dmaengine: mxs-dma: add dma support for i.MX23/28 This patch adds dma support for Freescale MXS-based SoC i.MX23/28, including apbh-dma and apbx-dma. * apbh-dma and apbx-dma are supported in the driver as two mxs-dma instances. * apbh-dma is different between mx23 and mx28, hardware version register is used to differentiate. * mxs-dma supports pio function besides data transfer. The driver uses dma_data_direction DMA_NONE to identify the pio mode, and steals sgl and sg_len to get pio words and numbers from clients. * mxs dmaengine has some very specific features, like sense function and the special NAND support (nand_lock, nand_wait4ready). These are too specific to implemented in generic dmaengine driver. * The driver refers to imx-sdma and only a single descriptor is statically assigned to each channel. Signed-off-by: Shawn Guo <shawn.guo@freescale.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2011-02-26 19:47:42 +03:00
obj-$(CONFIG_MXS_DMA) += mxs-dma.o
dmaengine: sort the makefile dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 11:13:14 +03:00
obj-$(CONFIG_MX3_IPU) += ipu/
obj-$(CONFIG_NBPFAXI_DMA) += nbpfaxi.o
obj-$(CONFIG_PCH_DMA) += pch_dma.o
obj-$(CONFIG_PL330_DMA) += pl330.o
obj-$(CONFIG_PPC_BESTCOMM) += bestcomm/
dmaengine: pxa: add pxa dmaengine driver This is a new driver for pxa SoCs, which is also compatible with the former mmp_pdma. The rationale behind a new driver (as opposed to incremental patching) was : - the new driver relies on virt-dma, which obsoletes all the internal structures of mmp_pdma (sw_desc, hw_desc, ...), and by consequence all the functions - mmp_pdma allocates dma coherent descriptors containing not only hardware descriptors but linked list information The new driver only puts the dma hardware descriptors (ie. 4 u32) into the dma pool allocated memory. This changes completely the way descriptors are handled - the architecture behind the interrupt/tasklet management was rewritten to be more conforming to virt-dma - the buffers alignment is handled differently The former driver assumed that the DMA channel stopped between each descriptor. The new one chains descriptors to let the channel running. This is a necessary guarantee for real-time high bandwidth usecases such as video capture on "old" architectures such as pxa. - hot chaining / cold chaining / no chaining Whenever possible, submitting a descriptor "hot chains" it to a running channel. There is still no guarantee that the descriptor will be issued, as the channel might be stopped just before the descriptor is submitted. Yet this allows to submit several video buffers, and resubmit a buffer while another is under handling. As before, dma_async_issue_pending() is the only guarantee to have all the buffers issued. When an alignment issue is detected (ie. one address in a descriptor is not a multiple of 8), if the already running channel is in "aligned mode", the channel will stop, and restarted in "misaligned mode" to finished the issued list. - descriptors reusing A submitted, issued and completed descriptor can be reused, ie resubmitted if it was prepared with the proper flag (DMA_PREP_ACK). Only a channel resources release will in this case release that buffer. This allows a rolling ring of buffers to be reused, where there are several thousands of hardware descriptors used (video buffer for example). Additionally, a set of more casual features is introduced : - debugging traces - lockless way to know if a descriptor is terminated or not The driver was tested on zylonite board (pxa3xx) and mioa701 (pxa27x), with dmatest, pxa_camera and pxamci. Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-05-26 00:29:20 +03:00
obj-$(CONFIG_PXA_DMA) += pxa_dma.o
dmaengine: sort the makefile dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 11:13:14 +03:00
obj-$(CONFIG_RENESAS_DMA) += sh/
dmaengine: add CSR SiRFprimaII DMAC driver Cc: Jassi Brar <jaswinder.singh@linaro.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rongjun Ying <rongjun.ying@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> [fixed direction enums and cyclic api based on changes already merged] Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
2011-10-28 06:22:39 +04:00
obj-$(CONFIG_SIRF_DMA) += sirf-dma.o
DMAENGINE: Support for ST-Ericssons DMA40 block v3 This is a straightforward driver for the ST-Ericsson DMA40 DMA controller found in U8500, implemented akin to the existing COH 901 318 driver. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Srinidh Kasagar <srinidhi.kasagar@stericsson.com> Cc: STEricsson_nomadik_linux@list.st.com Cc: Alessandro Rubini <rubini@unipv.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2010-03-30 17:33:42 +04:00
obj-$(CONFIG_STE_DMA40) += ste_dma40.o ste_dma40_ll.o
dmaengine: Add STM32 DMA driver This patch adds support for the STM32 DMA controller. Signed-off-by: M'boumba Cedric Madianga <cedric.madianga@gmail.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-10-16 16:59:14 +03:00
obj-$(CONFIG_STM32_DMA) += stm32-dma.o
dmaengine: add driver for Samsung s3c24xx SoCs This adds a new driver to support the s3c24xx dma using the dmaengine and makes the old one in mach-s3c24xx obsolete in the long run. Conceptually the s3c24xx-dma feels like a distant relative of the pl08x with numerous virtual channels being mapped to a lot less physical ones. The driver therefore borrows a lot from the amba-pl08x driver in this regard. Functionality-wise the driver gains a memcpy ability in addition to the slave_sg one. The driver supports both the method for requesting the peripheral used by SoCs before the S3C2443 and the different method for S3C2443 and later. On earlier SoCs the hardware channels usable for specific peripherals is constrainted while on later SoCs all channels can be used for any peripheral. Tested on a s3c2416-based board, memcpy using the dmatest module and slave_sg partially using the spi-s3c64xx driver. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>
2013-10-08 01:42:10 +04:00
obj-$(CONFIG_S3C24XX_DMAC) += s3c24xx-dma.o
dmaengine: sort the makefile dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 11:13:14 +03:00
obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
obj-$(CONFIG_TEGRA20_APB_DMA) += tegra20-apb-dma.o
dmaengine: tegra-adma: Add support for Tegra210 ADMA Add support for the Tegra210 Audio DMA controller that is used for transferring data between system memory and the Audio sub-system. The driver only supports cyclic transfers because this is being solely used for audio. This driver is based upon the work by Dara Ramesh <dramesh@nvidia.com>. Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-05-12 20:02:23 +03:00
obj-$(CONFIG_TEGRA210_ADMA) += tegra210-adma.o
dmaengine: sort the makefile dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 11:13:14 +03:00
obj-$(CONFIG_TIMB_DMA) += timb_dma.o
usb: musb dma: add cppi41 dma driver This driver is currently used by musb' cppi41 couter part. I may merge both dma engine user of musb at some point but not just yet. The driver seems to work in RX/TX mode in host mode, tested on mass storage. I increaed the size of the TX / RX transfers and waited for the core code to cancel a transfers and it seems to recover. v2..3: - use mall transfers on RX side and check data toggle. - use rndis mode on tx side so we haveon interrupt for 4096 transfers. - remove custom "transferred" hack and use dmaengine_tx_status() to compute the total amount of data that has been transferred. - cancel transfers and reclaim descriptors v1..v2: - RX path added - dma mode 0 & 1 is working - device tree nodes re-created. Cc: Vinod Koul <vinod.koul@intel.com> Cc: Dan Williams <djbw@fb.com> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Felipe Balbi <balbi@ti.com>
2013-06-20 14:13:04 +04:00
obj-$(CONFIG_TI_CPPI41) += cppi41.o
dmaengine: sort the makefile dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 11:13:14 +03:00
obj-$(CONFIG_TI_DMA_CROSSBAR) += ti-dma-crossbar.o
obj-$(CONFIG_TI_EDMA) += edma.o
dmaengine: Add support for APM X-Gene SoC DMA engine driver This patch implements the APM X-Gene SoC DMA engine driver. The APM X-Gene SoC DMA engine consists of 4 DMA channels for performing DMA operations. These DMA operations include memory copy, scatter-gather memory copy, raid5 xor, and raid6 p+q offloading. Signed-off-by: Rameshwar Prasad Sahu <rsahu@apm.com> Signed-off-by: Loc Ho <lho@apm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-03-18 16:47:34 +03:00
obj-$(CONFIG_XGENE_DMA) += xgene-dma.o
dmaengine: zx: rename zx296702_dma.c to zx_dma.c ZTE ZX dma driver is not ZX296702 specific. It works for not only ZX296702 but also other ZTE ZX family platforms like ZX296718. Let's rename the file to reflect that. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-12-15 17:03:35 +03:00
obj-$(CONFIG_ZX_DMA) += zx_dma.o
dmaengine: st_fdma: Add STMicroelectronics FDMA engine driver support This patch adds support for the Flexible Direct Memory Access (FDMA) core driver. The FDMA is a slim core CPU with a dedicated firmware. It is a general purpose DMA controller capable of supporting 16 independent DMA channels. Data moves maybe from memory to memory or between memory and paced latency critical real time targets and it is found on al STi based chipsets. Signed-off-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-10-18 12:39:11 +03:00
obj-$(CONFIG_ST_FDMA) += st_fdma.o
dmaengine: sort the makefile dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 11:13:14 +03:00
dmaengine: qcom_bam_dma: move to qcom directory Creating a QCOM directory for all QCOM DMA source files. Signed-off-by: Sinan Kaya <okaya@codeaurora.org> Reviewed-by: Andy Gross <agross@codeaurora.org> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2016-02-05 07:34:32 +03:00
obj-y += qcom/
dmaengine: sort the makefile dmaengine makefile grew over the years, unfortunately without any order to it. So order by core, dmatest and driver sections and sort these sections alphabetically Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2015-08-24 11:13:14 +03:00
obj-y += xilinx/