microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/mfd/Kconfig

289 строки
8.0 KiB
Plaintext
Исходник Обычный вид История

[MFD] Add multimedia communication port core support Add support for the core of the multimedia communication port framework. This is a port used to communicate with devices with two DMA paths and a control path. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18 13:06:59 +04:00
#
# Multifunction miscellaneous devices
#
[PATCH] mfd: SM501 core driver This driver provides the core functionality of the SM501, which is a multi-function chip including two framebuffers, video acceleration, USB, and many other peripheral blocks. The driver exports a number of entries for the peripheral drivers to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-21 00:58:01 +03:00
menu "Multifunction device drivers"
[S390] Kconfig: menus with depends on HAS_IOMEM. Add "depends on HAS_IOMEM" to a number of menus to make them disappear for s390 which does not have I/O memory. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10 17:45:57 +04:00
depends on HAS_IOMEM
[PATCH] mfd: SM501 core driver This driver provides the core functionality of the SM501, which is a multi-function chip including two framebuffers, video acceleration, USB, and many other peripheral blocks. The driver exports a number of entries for the peripheral drivers to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-21 00:58:01 +03:00
[ARM] 5127/1: Core MFD support This patch provides a common subdevice registration system for MFD type chips, using platfrom device. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-27 13:37:19 +04:00
config MFD_CORE
tristate
default n
[PATCH] mfd: SM501 core driver This driver provides the core functionality of the SM501, which is a multi-function chip including two framebuffers, video acceleration, USB, and many other peripheral blocks. The driver exports a number of entries for the peripheral drivers to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-21 00:58:01 +03:00
config MFD_SM501
tristate "Support for Silicon Motion SM501"
---help---
This is the core driver for the Silicon Motion SM501 multimedia
companion chip. This device is a multifunction device which may
typo fixes Most of these fixes were already submitted for old kernel versions, and were approved, but for some reason they never made it into the releases. Because this is a consolidation of a couple old missed patches, it touches both Kconfigs and documentation texts. Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-20 03:34:40 +04:00
provide numerous interfaces including USB host controller, USB gadget,
asynchronous serial ports, audio functions, and a dual display video
[PATCH] mfd: SM501 core driver This driver provides the core functionality of the SM501, which is a multi-function chip including two framebuffers, video acceleration, USB, and many other peripheral blocks. The driver exports a number of entries for the peripheral drivers to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-21 00:58:01 +03:00
interface. The device may be connected by PCI or local bus with
varying functions enabled.
sm501: add gpiolib support Add support for exporting the GPIOs on the SM501 via gpiolib. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Arnaud Patard <apatard@mandriva.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:45:59 +04:00
config MFD_SM501_GPIO
bool "Export GPIO via GPIO layer"
mfd: Fix Kconfig accroding to the new gpiolib symbols HAVE_GPIO_LIB has basically been replaced by GPIOLIB Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-09-25 02:39:05 +04:00
depends on MFD_SM501 && GPIOLIB
sm501: add gpiolib support Add support for exporting the GPIOs on the SM501 via gpiolib. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Cc: Arnaud Patard <apatard@mandriva.com> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:45:59 +04:00
---help---
This option uses the gpio library layer to export the 64 GPIO
lines on the SM501. The platform data is used to supply the
base number for the first GPIO line to register.
ASIC3 driver This is a patch for the Compaq ASIC3 multi function chip, found in many PDAs (iPAQs, HTCs...). It is a simplified version of Paul Sokolovsky's first proposal [1]. With this code, it is basically a GPIO and IRQ expander. My plan is to add more features once this patch gets reviewed and accepted. [1] http://lkml.org/lkml/2007/5/1/46 Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Cc: Paul Sokolovsky <pmiscml@gmail.com> Cc: Ben Dooks <ben@trinity.fluff.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:49 +03:00
config MFD_ASIC3
bool "Support for Compaq ASIC3"
mfd: Fix Kconfig accroding to the new gpiolib symbols HAVE_GPIO_LIB has basically been replaced by GPIOLIB Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-09-25 02:39:05 +04:00
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
ASIC3 driver This is a patch for the Compaq ASIC3 multi function chip, found in many PDAs (iPAQs, HTCs...). It is a simplified version of Paul Sokolovsky's first proposal [1]. With this code, it is basically a GPIO and IRQ expander. My plan is to add more features once this patch gets reviewed and accepted. [1] http://lkml.org/lkml/2007/5/1/46 Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Cc: Paul Sokolovsky <pmiscml@gmail.com> Cc: Ben Dooks <ben@trinity.fluff.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-07 11:14:49 +03:00
---help---
This driver supports the ASIC3 multifunction chip found on many
PDAs (mainly iPAQ and HTC based ones)
mfd: dm355evm msp430 driver Basic MFD framework for the MSP430 microcontroller firmware used on the dm355evm board: - Provides an interface for other drivers: register read/write utilities, and register declarations. - Directly exports: * Many signals through the GPIO framework + LEDs + SW6 through gpio sysfs + NTSC/nPAL jumper through gpio sysfs + ... more could be added later, e.g. MMC signals * Child devices: + LEDs, via leds-gpio child (and default triggers) + RTC, via rtc-dm355evm child device + Buttons and IR control, via dm355evm_keys - Supports power-off system call. Use the reset button to power the board back up; the power supply LED will be on, but the MSP430 waits to re-activate the regulators. - On probe() this: * Announces firmware revision * Turns off the banked LEDs * Exports the resources noted above * Hooks the power-off support * Muxes tvp5146 -or- imager for video input Unless the new tvp514x driver (tracked for mainline) is configured, this assumes that some custom imager driver handles video-in. This completely ignores the registers reporting the output voltages on the various power supplies. Someone could add a hwmon interface if that seems useful. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-22 14:05:27 +03:00
config MFD_DM355EVM_MSP
bool "DaVinci DM355 EVM microcontroller"
depends on I2C && MACH_DAVINCI_DM355_EVM
help
This driver supports the MSP430 microcontroller used on these
boards. MSP430 firmware manages resets and power sequencing,
inputs from buttons and the IR remote, LEDs, an RTC, and more.
[ARM] 4947/1: htc-egpio, a driver for GPIO/IRQ expanders with fixed input/output pins implemented in CPLD chips on several HTC devices. The original driver was written by Kevin O'Connor, I have adapted it to use gpiolib and made the bus/register widths configurable. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-09 22:20:34 +04:00
config HTC_EGPIO
bool "HTC EGPIO support"
gpiolib: allow user-selection This patch adds functionality to the gpio-lib subsystem to make it possible to enable the gpio-lib code even if the architecture code didn't request to get it built in. The archtitecture code does still need to implement the gpiolib accessor functions in its asm/gpio.h file. This patch adds the implementations for x86 and PPC. With these changes it is possible to run generic GPIO expansion cards on every architecture that implements the trivial wrapper functions. Support for more architectures can easily be added. Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: David Brownell <david-b@pacbell.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Sam Ravnborg <sam@ravnborg.org> Cc: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-25 12:46:11 +04:00
depends on GENERIC_HARDIRQS && GPIOLIB && ARM
[ARM] 4947/1: htc-egpio, a driver for GPIO/IRQ expanders with fixed input/output pins implemented in CPLD chips on several HTC devices. The original driver was written by Kevin O'Connor, I have adapted it to use gpiolib and made the bus/register widths configurable. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-09 22:20:34 +04:00
help
This driver supports the CPLD egpio chip present on
several HTC phones. It provides basic support for input
pins, output pins, and irqs.
[ARM] 4964/1: htc-pasic3: MFD driver for PASIC3 LED control + DS1WM chip This driver will provide registers, clocks and GPIOs of the HTC PASIC3 (AIC3) and PASIC2 (AIC2) chips to the ds1wm and leds-pasic3 drivers. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-12 16:25:41 +04:00
config HTC_PASIC3
tristate "HTC PASIC3 LED/DS1WM chip support"
mfd: convert PASIC3 to use MFD core This patch makes htc-pasic3 register the DS1WM and LED cell drivers through the MFD core infrastructure instead of allocating the platform devices manually. It also calculates the bus_shift parameter from the memory resource size. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-02-17 12:06:45 +03:00
select MFD_CORE
[ARM] 4964/1: htc-pasic3: MFD driver for PASIC3 LED control + DS1WM chip This driver will provide registers, clocks and GPIOs of the HTC PASIC3 (AIC3) and PASIC2 (AIC2) chips to the ds1wm and leds-pasic3 drivers. Signed-off-by: Philipp Zabel <philipp.zabel@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-12 16:25:41 +04:00
help
This core driver provides register access for the LED/DS1WM
chips labeled "AIC2" and "AIC3", found on HTC Blueangel and
HTC Magician devices, respectively. Actual functionality is
handled by the leds-pasic3 and ds1wm drivers.
[ARM] 5184/1: Split ucb1400_ts into core and touchscreen This patch splits ucb1400_ts into ucb1400_ts and ucb1400_core. Since this chip supports more features than only touchscreen, it was necessary to prepare it for feature addition. The previous functionality is preserved by applying this patch. [Build fixes for non-ARM by Stephen Rothwell and Takashi Iwai] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-04 00:34:08 +04:00
config UCB1400_CORE
tristate "Philips UCB1400 Core driver"
mfd: ucb1400 sound driver uses/depends on AC97_BUS: ERROR: "ac97_bus_type" [drivers/mfd/ucb1400_core.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-10-15 15:29:07 +04:00
depends on AC97_BUS
mfd: ucb1400 needs GPIO ia64 allmodconfig: In file included from include/linux/ucb1400.h:27, from drivers/mfd/ucb1400_core.c:24: include/asm-generic/gpio.h: In function `gpio_get_value_cansleep': include/asm-generic/gpio.h:147: error: implicit declaration of function `gpio_get_value' include/asm-generic/gpio.h: In function `gpio_set_value_cansleep': include/asm-generic/gpio.h:153: error: implicit declaration of function `gpio_set_value' drivers/mfd/ucb1400_core.c: At top level: Signed-off-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-10-15 15:30:47 +04:00
depends on GPIOLIB
[ARM] 5184/1: Split ucb1400_ts into core and touchscreen This patch splits ucb1400_ts into ucb1400_ts and ucb1400_core. Since this chip supports more features than only touchscreen, it was necessary to prepare it for feature addition. The previous functionality is preserved by applying this patch. [Build fixes for non-ARM by Stephen Rothwell and Takashi Iwai] Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-08-04 00:34:08 +04:00
help
This enables support for the Philips UCB1400 core functions.
The UCB1400 is an AC97 audio codec.
To compile this driver as a module, choose M here: the
module will be called ucb1400_core.
mfd: move drivers/i2c/chips/tps65010.c to drivers/mfd Move the tps65010 driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP1 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-22 14:16:27 +03:00
config TPS65010
tristate "TPS6501x Power Management chips"
depends on I2C && GPIOLIB
default y if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_OSK
help
If you say yes here you get support for the TPS6501x series of
Power Management chips. These include voltage regulators,
lithium ion/polymer battery charging, and other features that
are often used in portable devices like cell phones and cameras.
This driver can also be built as a module. If so, the module
will be called tps65010.
mfd: move drivers/i2c/chips/menelaus.c to drivers/mfd ove the menelaus driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP2 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-22 14:18:02 +03:00
config MENELAUS
bool "Texas Instruments TWL92330/Menelaus PM chip"
depends on I2C=y && ARCH_OMAP24XX
help
If you say yes here you get support for the Texas Instruments
TWL92330/Menelaus Power Management chip. This include voltage
trivial: fix typos/grammar errors in Kconfig texts Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Acked-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-01-26 13:12:25 +03:00
regulators, Dual slot memory card transceivers, real-time clock
mfd: move drivers/i2c/chips/menelaus.c to drivers/mfd ove the menelaus driver from drivers/i2c/chips to drivers/mfd since it's more of a multi-function device than anything else, and since Jean is trying to vanish drivers/i2c/chips ASAP. One way to think of these chips are as the PMIC family most used with OMAP2 generation chips. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-22 14:18:02 +03:00
and other features that are often used in portable devices like
cell phones and PDAs.
mfd: TWL4030 core driver This patch adds the core of the TWL4030 driver, which supports chips including the TPS65950. These chips are multi-function; see http://focus.ti.com/docs/prod/folders/print/tps65950.html Public specs are in the works. For now, the block diagram on the second page of the datasheet is fairly informative. There are some known issues with this core code. Most notably, the IRQ dispatching needs simplification (to use more of genirq), generalization (integrating support for secondary IRQ dispatch as well as primary, and removing the build dependency on OMAP), and then probably updating to leverage threaded IRQ support (expected to arrive in mainline "soon"). Once the core is in mainline, drivers for other parts of this chip can follow its lead and start swimming upstream too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-15 14:15:39 +04:00
config TWL4030_CORE
bool "Texas Instruments TWL4030/TPS659x0 Support"
mfd: twl4030: cleanup symbols and OMAP dependency Finish removing dependency of TWL driver stack on platform-specific IRQ definitions ... and remove the build dependency on OMAP. This lets the TWL4030 code be included in test builds for most platforms, and will make it easier for non-OMAP folk to update most of this code for new APIs etc. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-01 02:35:33 +03:00
depends on I2C=y && GENERIC_HARDIRQS
mfd: TWL4030 core driver This patch adds the core of the TWL4030 driver, which supports chips including the TPS65950. These chips are multi-function; see http://focus.ti.com/docs/prod/folders/print/tps65950.html Public specs are in the works. For now, the block diagram on the second page of the datasheet is fairly informative. There are some known issues with this core code. Most notably, the IRQ dispatching needs simplification (to use more of genirq), generalization (integrating support for secondary IRQ dispatch as well as primary, and removing the build dependency on OMAP), and then probably updating to leverage threaded IRQ support (expected to arrive in mainline "soon"). Once the core is in mainline, drivers for other parts of this chip can follow its lead and start swimming upstream too. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-15 14:15:39 +04:00
help
Say yes here if you have TWL4030 family chip on your board.
This core driver provides register access and IRQ handling
facilities, and registers devices for the various functions
so that function-specific drivers can bind to them.
These multi-function chips are found on many OMAP2 and OMAP3
boards, providing power management, RTC, GPIO, keypad, a
high speed USB OTG transceiver, an audio codec (on most
versions) and many other features.
mfd: have TMIO drivers and subdevices depend on ARM The TMIO chips are only found (and thus tested) on ARM machines. Moreover, we don't want the TMIO cells to be built if one of the TMIO driver is not selected (which indirectly make the TMIO cells drivers depend on ARM as well). Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-05 21:27:58 +04:00
config MFD_TMIO
bool
default n
mfd: driver for the T7L66XB TMIO SoC This patchset provides support for the core functinality of the T7L66XB SoC from Toshiba. Supported in this patchset is the IRQ MUX, MMC controller and NAND flash controller. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-15 18:09:43 +04:00
config MFD_T7L66XB
bool "Support Toshiba T7L66XB"
missing dependencies on HAVE_CLK in drivers/mfd Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01 21:19:59 +03:00
depends on ARM && HAVE_CLK
mfd: driver for the T7L66XB TMIO SoC This patchset provides support for the core functinality of the T7L66XB SoC from Toshiba. Supported in this patchset is the IRQ MUX, MMC controller and NAND flash controller. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-15 18:09:43 +04:00
select MFD_CORE
mfd: have TMIO drivers and subdevices depend on ARM The TMIO chips are only found (and thus tested) on ARM machines. Moreover, we don't want the TMIO cells to be built if one of the TMIO driver is not selected (which indirectly make the TMIO cells drivers depend on ARM as well). Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-05 21:27:58 +04:00
select MFD_TMIO
mfd: driver for the T7L66XB TMIO SoC This patchset provides support for the core functinality of the T7L66XB SoC from Toshiba. Supported in this patchset is the IRQ MUX, MMC controller and NAND flash controller. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-15 18:09:43 +04:00
help
Support for Toshiba Mobile IO Controller T7L66XB
mfd: driver for the TC6387XB TMIO controller. This patch adds support for the TC6387XB. Unlike other TMIO devices this one has only one subdevice and no interrupt mux, however using the MFD framework allows it to share the TMIO MMC driver. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-15 18:12:52 +04:00
config MFD_TC6387XB
bool "Support Toshiba TC6387XB"
missing dependencies on HAVE_CLK in drivers/mfd Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-11-01 21:19:59 +03:00
depends on ARM && HAVE_CLK
mfd: driver for the TC6387XB TMIO controller. This patch adds support for the TC6387XB. Unlike other TMIO devices this one has only one subdevice and no interrupt mux, however using the MFD framework allows it to share the TMIO MMC driver. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-15 18:12:52 +04:00
select MFD_CORE
mfd: have TMIO drivers and subdevices depend on ARM The TMIO chips are only found (and thus tested) on ARM machines. Moreover, we don't want the TMIO cells to be built if one of the TMIO driver is not selected (which indirectly make the TMIO cells drivers depend on ARM as well). Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-05 21:27:58 +04:00
select MFD_TMIO
mfd: driver for the TC6387XB TMIO controller. This patch adds support for the TC6387XB. Unlike other TMIO devices this one has only one subdevice and no interrupt mux, however using the MFD framework allows it to share the TMIO MMC driver. Signed-off-by: Ian Molton <spyro@f2s.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-07-15 18:12:52 +04:00
help
Support for Toshiba Mobile IO Controller TC6387XB
[ARM] 5096/2: Support Toshiba TC6393XB Mobile I/O Controller. Add support for Toshiba TC6393XB companion chip. Currently only GPIO and part of IRQ features of the device are supported. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-22 15:01:58 +04:00
config MFD_TC6393XB
bool "Support Toshiba TC6393XB"
MFD_TC6393XB is ARM-only Compile error on other architectures: CC drivers/mfd/tc6393xb.o /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/mfd/tc6393xb.c: In function ‘tc6393xb_attach_irq’: /home/bunk/linux/kernel-2.6/git/linux-2.6/drivers/mfd/tc6393xb.c:324: error: implicit declaration of function ‘set_irq_flags’ ... Reported-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-26 03:38:00 +04:00
depends on GPIOLIB && ARM
[ARM] 5128/1: tc6393xb: tmio-nand support Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-27 13:37:57 +04:00
select MFD_CORE
mfd: have TMIO drivers and subdevices depend on ARM The TMIO chips are only found (and thus tested) on ARM machines. Moreover, we don't want the TMIO cells to be built if one of the TMIO driver is not selected (which indirectly make the TMIO cells drivers depend on ARM as well). Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-08-05 21:27:58 +04:00
select MFD_TMIO
[ARM] 5096/2: Support Toshiba TC6393XB Mobile I/O Controller. Add support for Toshiba TC6393XB companion chip. Currently only GPIO and part of IRQ features of the device are supported. Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-06-22 15:01:58 +04:00
help
Support for Toshiba Mobile IO Controller TC6393XB
mfd: add missing Kconfig entry for da903x This one was accidentally left out during the rc1 mfd merge. Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-24 19:10:05 +04:00
config PMIC_DA903X
bool "Dialog Semiconductor DA9030/DA9034 PMIC Support"
depends on I2C=y
help
Say yes here to support for Dialog Semiconductor DA9030 (a.k.a
ARAVA) and DA9034 (a.k.a MICCO), these are Power Management IC
usually found on PXA processors-based platforms. This includes
the I2C driver and the core APIs _only_, you have to select
individual components like LCD backlight, voltage regulators,
LEDs and battery-charger under the corresponding menus.
mfd: Core support for the WM8400 AudioPlus HiFi CODEC and PMU The WM8400 is a highly integrated audio CODEC and power management unit optimised for use in mobile multimedia applications. This patch adds core support for the WM8400 to the MFD subsystem. Both I2C and SPI access are supported by the hardware but currently only I2C access is implemented. The code is structured to allow SPI support to be slotted in later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-09-10 21:58:42 +04:00
config MFD_WM8400
tristate "Support Wolfson Microelectronics WM8400"
mfd: Register WM8400 codec device Register a child device for the codec in the WM8400. Also switch the unregistration of the MFD devices to use the MFD core since the current code is hand rolling the same thing. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-18 12:54:22 +03:00
select MFD_CORE
mfd: Make WM8400 depend on I2C until SPI is submitted Otherwise we could build in WM8400 but not I2C. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-10-24 19:16:11 +04:00
depends on I2C
mfd: Core support for the WM8400 AudioPlus HiFi CODEC and PMU The WM8400 is a highly integrated audio CODEC and power management unit optimised for use in mobile multimedia applications. This patch adds core support for the WM8400 to the MFD subsystem. Both I2C and SPI access are supported by the hardware but currently only I2C access is implemented. The code is structured to allow SPI support to be slotted in later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-09-10 21:58:42 +04:00
help
Support for the Wolfson Microelecronics WM8400 PMIC and audio
mfd: Fix Kconfig help text for WM8350 More with the grammar. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-05-29 14:34:18 +04:00
CODEC. This driver provides common support for accessing
mfd: Core support for the WM8400 AudioPlus HiFi CODEC and PMU The WM8400 is a highly integrated audio CODEC and power management unit optimised for use in mobile multimedia applications. This patch adds core support for the WM8400 to the MFD subsystem. Both I2C and SPI access are supported by the hardware but currently only I2C access is implemented. The code is structured to allow SPI support to be slotted in later. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-09-10 21:58:42 +04:00
the device, additional drivers must be enabled in order to use
the functionality of the device.
mfd: Core support for the WM8350 AudioPlus PMIC The WM8350 is an integrated audio and power management subsystem intended for use as the primary PMIC in mobile multimedia applications. The WM8350 can be controlled via either I2C or SPI - the control interface is provided by a separate module in order to allow greatest flexibility in configuring the kernel. This driver was originally written by Liam Girdwood and has since been updated to current kernel APIs and split up for submission by me. All the heavy lifting here was done by Liam. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 18:58:10 +04:00
config MFD_WM8350
tristate
config MFD_WM8350_CONFIG_MODE_0
bool
depends on MFD_WM8350
config MFD_WM8350_CONFIG_MODE_1
bool
depends on MFD_WM8350
config MFD_WM8350_CONFIG_MODE_2
bool
depends on MFD_WM8350
config MFD_WM8350_CONFIG_MODE_3
bool
depends on MFD_WM8350
mfd: Add WM8351 support The WM8351 is a WM8350 variant. As well as register default changes the WM8351 has fewer voltage and current regulators than the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-19 01:12:28 +03:00
config MFD_WM8351_CONFIG_MODE_0
bool
depends on MFD_WM8350
config MFD_WM8351_CONFIG_MODE_1
bool
depends on MFD_WM8350
config MFD_WM8351_CONFIG_MODE_2
bool
depends on MFD_WM8350
config MFD_WM8351_CONFIG_MODE_3
bool
depends on MFD_WM8350
mfd: Add WM8352 support The WM8352 is a variant of the WM8350. Aside from the register defaults there are no software visible differences to the WM8350. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2008-12-19 01:09:50 +03:00
config MFD_WM8352_CONFIG_MODE_0
bool
depends on MFD_WM8350
config MFD_WM8352_CONFIG_MODE_1
bool
depends on MFD_WM8350
config MFD_WM8352_CONFIG_MODE_2
bool
depends on MFD_WM8350
config MFD_WM8352_CONFIG_MODE_3
bool
depends on MFD_WM8350
mfd: Add I2C control support for WM8350 Implement the I2C control interface for the WM8350. This code was originally written by Liam Girdwood and has been updated for submission by Mark Brown. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Samuel Ortiz <sameo@openedhand.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2008-10-10 18:58:11 +04:00
config MFD_WM8350_I2C
tristate "Support Wolfson Microelectronics WM8350 with I2C"
select MFD_WM8350
depends on I2C
help
The WM8350 is an integrated audio and power management
subsystem with watchdog and RTC functionality for embedded
systems. This option enables core support for the WM8350 with
I2C as the control interface. Additional options must be
selected to enable support for the functionality of the chip.
mfd: PCF50633 core driver This patch implements the core of the PCF50633 driver. This core driver has generic register read/write functions and does interrupt management for its sub devices. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-09 03:49:01 +03:00
config MFD_PCF50633
tristate "Support for NXP PCF50633"
depends on I2C
help
Say yes here if you have NXP PCF50633 chip on your board.
This core driver provides register access and IRQ handling
facilities, and registers devices for the various functions
so that function-specific drivers can bind to them.
mfd: PCF50633 adc driver This patch adds basic support for the PCF50633 ADC. The subtractive mode is not supported yet. Since we don't have adc subsystem, it currently lives in drivers/mfd. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Acked-by: Jonathan Cameron <jonathan.cameron@gmail.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-09 03:49:26 +03:00
config PCF50633_ADC
tristate "Support for NXP PCF50633 ADC"
depends on MFD_PCF50633
help
Say yes here if you want to include support for ADC in the
NXP PCF50633 chip.
mfd: PCF50633 gpio support What the PCF05633 calls as a 'GPIO' is much more than the GPIO in the linux sense and there are only 4 of them - which means, the gpiolib is not used here. Signed-off-by: Balaji Rao <balajirrao@openmoko.org> Cc: Andy Green <andy@openmoko.com> Signed-off-by: Samuel Ortiz <sameo@openedhand.com>
2009-01-09 03:49:37 +03:00
config PCF50633_GPIO
tristate "Support for NXP PCF50633 GPIO"
depends on MFD_PCF50633
help
Say yes here if you want to include support GPIO for pins on
the PCF50633 chip.
mfd: add U300 AB3100 core support This adds a core driver for the AB3100 mixed-signal circuit found in the ST-Ericsson U300 series platforms. This driver is a singleton proxy for all accesses to the AB3100 sub-drivers which will be merged on top of this one, RTC, regulators, battery and system power control, vibrator, LEDs, and an ALSA codec. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mike Rapoport <mike@compulab.co.il> Reviewed-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-05-22 01:17:06 +04:00
config AB3100_CORE
tristate "ST-Ericsson AB3100 Mixed Signal Circuit core functions"
depends on I2C
default y if ARCH_U300
help
Select this to enable the AB3100 Mixed Signal IC core
functionality. This connects to a AB3100 on the I2C bus
and expose a number of symbols needed for dependent devices
to read and write registers and subscribe to events from
this multi-functional IC. This is needed to use other features
of the AB3100 such as battery-backed RTC, charging control,
LEDs, vibrator, system power and temperature, power management
and ALSA sound.
mfd: add PCAP driver The PCAP Asic as present on EZX phones is a multi function device with voltage regulators, ADC, touch screen controller, RTC, USB transceiver, leds controller, and audio codec. It has two SPI ports, typically one is connected to the application processor and another to the baseband, this driver provides read/write functions to its registers, irq demultiplexer and ADC queueing/abstraction. This chip is used on a lot of Motorola phones, it was manufactured by TI as a custom product with the name PTWL93017, later this design evolved into the ATLAS PMIC from Freescale (MC13783). Signed-off-by: Daniel Ribeiro <drwyrm@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-05-28 22:43:37 +04:00
config EZX_PCAP
bool "PCAP Support"
depends on GENERIC_HARDIRQS && SPI_MASTER
help
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..
[PATCH] mfd: SM501 core driver This driver provides the core functionality of the SM501, which is a multi-function chip including two framebuffers, video acceleration, USB, and many other peripheral blocks. The driver exports a number of entries for the peripheral drivers to use. Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Vincent Sanders <vince@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-02-21 00:58:01 +03:00
endmenu
[MFD] Add multimedia communication port core support Add support for the core of the multimedia communication port framework. This is a port used to communicate with devices with two DMA paths and a control path. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18 13:06:59 +04:00
menu "Multimedia Capabilities Port drivers"
[PATCH] show MCP menu only on ARCH_SA1100 On architectures like i386, the "Multimedia Capabilities Port drivers" menu is visible, but it can't be visited since it contains nothing usable for !ARCH_SA1100. This patch therefore shows this menu only on ARCH_SA1100. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-03-24 14:18:21 +03:00
depends on ARCH_SA1100
[MFD] Add multimedia communication port core support Add support for the core of the multimedia communication port framework. This is a port used to communicate with devices with two DMA paths and a control path. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18 13:06:59 +04:00
config MCP
tristate
[MFD] Add SA11x0 MCP support This adds support for the MCP interface found on SA11x0 devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18 13:08:15 +04:00
# Interface drivers
config MCP_SA11X0
tristate "Support SA11x0 MCP interface"
depends on ARCH_SA1100
select MCP
[MFD] Add code UCB1200/UCB1300 device support Add the core device support code for the Philips UCB1200 and UCB1300 devices. Also includes the following from Pavel: This fixes u32 vs. pm_message_t confusion and uses cleaner try_to_freeze() [fixing compilation as a side-effect on newer kernels.] Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11 13:26:31 +04:00
# Chip drivers
config MCP_UCB1200
tristate "Support for UCB1200 / UCB1300"
depends on MCP
[MFD] Add code UCB1200/UCB1300 touchscreen support Add support for Philips UCB1200 and UCB1300 touchscreen interfaces found on ARM devices. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-11 13:26:57 +04:00
config MCP_UCB1200_TS
tristate "Touchscreen interface support"
depends on MCP_UCB1200 && INPUT
[MFD] Add multimedia communication port core support Add support for the core of the multimedia communication port framework. This is a port used to communicate with devices with two DMA paths and a control path. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-08-18 13:06:59 +04:00
endmenu