WSL2-Linux-Kernel/drivers/char/selection.c

340 строки
8.5 KiB
C
Исходник Обычный вид История

/*
* linux/drivers/char/selection.c
*
* This module exports the functions:
*
* 'int set_selection(struct tiocl_selection __user *, struct tty_struct *)'
* 'void clear_selection(void)'
* 'int paste_selection(struct tty_struct *)'
* 'int sel_loadlut(char __user *)'
*
* Now that /dev/vcs exists, most of this can disappear again.
*/
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/types.h>
#include <asm/uaccess.h>
#include <linux/kbd_kern.h>
#include <linux/vt_kern.h>
#include <linux/consolemap.h>
#include <linux/selection.h>
#include <linux/tiocl.h>
#include <linux/console.h>
/* Don't take this from <ctype.h>: 011-015 on the screen aren't spaces */
#define isspace(c) ((c) == ' ')
extern void poke_blanked_console(void);
/* Variables for selection control. */
/* Use a dynamic buffer, instead of static (Dec 1994) */
struct vc_data *sel_cons; /* must not be deallocated */
static int use_unicode;
static volatile int sel_start = -1; /* cleared by clear_selection */
static int sel_end;
static int sel_buffer_lth;
static char *sel_buffer;
/* clear_selection, highlight and highlight_pointer can be called
from interrupt (via scrollback/front) */
/* set reverse video on characters s-e of console with selection. */
static inline void highlight(const int s, const int e)
{
invert_screen(sel_cons, s, e-s+2, 1);
}
/* use complementary color to show the pointer */
static inline void highlight_pointer(const int where)
{
complement_pos(sel_cons, where);
}
static u16
sel_pos(int n)
{
return inverse_translate(sel_cons, screen_glyph(sel_cons, n),
use_unicode);
}
/* remove the current selection highlight, if any,
from the console holding the selection. */
void
clear_selection(void) {
highlight_pointer(-1); /* hide the pointer */
if (sel_start != -1) {
highlight(sel_start, sel_end);
sel_start = -1;
}
}
/*
* User settable table: what characters are to be considered alphabetic?
* 256 bits
*/
static u32 inwordLut[8]={
0x00000000, /* control chars */
0x03FF0000, /* digits */
0x87FFFFFE, /* uppercase and '_' */
0x07FFFFFE, /* lowercase */
0x00000000,
0x00000000,
0xFF7FFFFF, /* latin-1 accented letters, not multiplication sign */
0xFF7FFFFF /* latin-1 accented letters, not division sign */
};
static inline int inword(const u16 c) {
return c > 0xff || (( inwordLut[c>>5] >> (c & 0x1F) ) & 1);
}
/* set inwordLut contents. Invoked by ioctl(). */
int sel_loadlut(char __user *p)
{
return copy_from_user(inwordLut, (u32 __user *)(p+4), 32) ? -EFAULT : 0;
}
/* does screen address p correspond to character at LH/RH edge of screen? */
static inline int atedge(const int p, int size_row)
{
return (!(p % size_row) || !((p + 2) % size_row));
}
/* constrain v such that v <= u */
static inline unsigned short limit(const unsigned short v, const unsigned short u)
{
return (v > u) ? u : v;
}
/* stores the char in UTF8 and returns the number of bytes used (1-3) */
static int store_utf8(u16 c, char *p)
{
if (c < 0x80) {
/* 0******* */
p[0] = c;
return 1;
} else if (c < 0x800) {
/* 110***** 10****** */
p[0] = 0xc0 | (c >> 6);
p[1] = 0x80 | (c & 0x3f);
return 2;
} else {
/* 1110**** 10****** 10****** */
p[0] = 0xe0 | (c >> 12);
p[1] = 0x80 | ((c >> 6) & 0x3f);
p[2] = 0x80 | (c & 0x3f);
return 3;
}
}
/* set the current selection. Invoked by ioctl() or by kernel code. */
int set_selection(const struct tiocl_selection __user *sel, struct tty_struct *tty)
{
struct vc_data *vc = vc_cons[fg_console].d;
int sel_mode, new_sel_start, new_sel_end, spc;
char *bp, *obp;
int i, ps, pe, multiplier;
u16 c;
struct kbd_struct *kbd = kbd_table + fg_console;
poke_blanked_console();
{ unsigned short xs, ys, xe, ye;
if (!access_ok(VERIFY_READ, sel, sizeof(*sel)))
return -EFAULT;
__get_user(xs, &sel->xs);
__get_user(ys, &sel->ys);
__get_user(xe, &sel->xe);
__get_user(ye, &sel->ye);
__get_user(sel_mode, &sel->sel_mode);
xs--; ys--; xe--; ye--;
xs = limit(xs, vc->vc_cols - 1);
ys = limit(ys, vc->vc_rows - 1);
xe = limit(xe, vc->vc_cols - 1);
ye = limit(ye, vc->vc_rows - 1);
ps = ys * vc->vc_size_row + (xs << 1);
pe = ye * vc->vc_size_row + (xe << 1);
if (sel_mode == TIOCL_SELCLEAR) {
/* useful for screendump without selection highlights */
clear_selection();
return 0;
}
if (mouse_reporting() && (sel_mode & TIOCL_SELMOUSEREPORT)) {
mouse_report(tty, sel_mode & TIOCL_SELBUTTONMASK, xs, ys);
return 0;
}
}
if (ps > pe) /* make sel_start <= sel_end */
{
int tmp = ps;
ps = pe;
pe = tmp;
}
if (sel_cons != vc_cons[fg_console].d) {
clear_selection();
sel_cons = vc_cons[fg_console].d;
}
use_unicode = kbd && kbd->kbdmode == VC_UNICODE;
switch (sel_mode)
{
case TIOCL_SELCHAR: /* character-by-character selection */
new_sel_start = ps;
new_sel_end = pe;
break;
case TIOCL_SELWORD: /* word-by-word selection */
spc = isspace(sel_pos(ps));
for (new_sel_start = ps; ; ps -= 2)
{
if ((spc && !isspace(sel_pos(ps))) ||
(!spc && !inword(sel_pos(ps))))
break;
new_sel_start = ps;
if (!(ps % vc->vc_size_row))
break;
}
spc = isspace(sel_pos(pe));
for (new_sel_end = pe; ; pe += 2)
{
if ((spc && !isspace(sel_pos(pe))) ||
(!spc && !inword(sel_pos(pe))))
break;
new_sel_end = pe;
if (!((pe + 2) % vc->vc_size_row))
break;
}
break;
case TIOCL_SELLINE: /* line-by-line selection */
new_sel_start = ps - ps % vc->vc_size_row;
new_sel_end = pe + vc->vc_size_row
- pe % vc->vc_size_row - 2;
break;
case TIOCL_SELPOINTER:
highlight_pointer(pe);
return 0;
default:
return -EINVAL;
}
/* remove the pointer */
highlight_pointer(-1);
/* select to end of line if on trailing space */
if (new_sel_end > new_sel_start &&
!atedge(new_sel_end, vc->vc_size_row) &&
isspace(sel_pos(new_sel_end))) {
for (pe = new_sel_end + 2; ; pe += 2)
if (!isspace(sel_pos(pe)) ||
atedge(pe, vc->vc_size_row))
break;
if (isspace(sel_pos(pe)))
new_sel_end = pe;
}
if (sel_start == -1) /* no current selection */
highlight(new_sel_start, new_sel_end);
else if (new_sel_start == sel_start)
{
if (new_sel_end == sel_end) /* no action required */
return 0;
else if (new_sel_end > sel_end) /* extend to right */
highlight(sel_end + 2, new_sel_end);
else /* contract from right */
highlight(new_sel_end + 2, sel_end);
}
else if (new_sel_end == sel_end)
{
if (new_sel_start < sel_start) /* extend to left */
highlight(new_sel_start, sel_start - 2);
else /* contract from left */
highlight(sel_start, new_sel_start - 2);
}
else /* some other case; start selection from scratch */
{
clear_selection();
highlight(new_sel_start, new_sel_end);
}
sel_start = new_sel_start;
sel_end = new_sel_end;
/* Allocate a new buffer before freeing the old one ... */
multiplier = use_unicode ? 3 : 1; /* chars can take up to 3 bytes */
bp = kmalloc(((sel_end-sel_start)/2+1)*multiplier, GFP_KERNEL);
if (!bp) {
printk(KERN_WARNING "selection: kmalloc() failed\n");
clear_selection();
return -ENOMEM;
}
kfree(sel_buffer);
sel_buffer = bp;
obp = bp;
for (i = sel_start; i <= sel_end; i += 2) {
c = sel_pos(i);
if (use_unicode)
bp += store_utf8(c, bp);
else
*bp++ = c;
if (!isspace(c))
obp = bp;
if (! ((i + 2) % vc->vc_size_row)) {
/* strip trailing blanks from line and add newline,
unless non-space at end of line. */
if (obp != bp) {
bp = obp;
*bp++ = '\r';
}
obp = bp;
}
}
sel_buffer_lth = bp - sel_buffer;
return 0;
}
/* Insert the contents of the selection buffer into the
* queue of the tty associated with the current console.
* Invoked by ioctl().
*/
int paste_selection(struct tty_struct *tty)
{
struct vc_data *vc = tty->driver_data;
[PATCH] TTY layer buffering revamp The API and code have been through various bits of initial review by serial driver people but they definitely need to live somewhere for a while so the unconverted drivers can get knocked into shape, existing drivers that have been updated can be better tuned and bugs whacked out. This replaces the tty flip buffers with kmalloc objects in rings. In the normal situation for an IRQ driven serial port at typical speeds the behaviour is pretty much the same, two buffers end up allocated and the kernel cycles between them as before. When there are delays or at high speed we now behave far better as the buffer pool can grow a bit rather than lose characters. This also means that we can operate at higher speeds reliably. For drivers that receive characters in blocks (DMA based, USB and especially virtualisation) the layer allows a lot of driver specific code that works around the tty layer with private secondary queues to be removed. The IBM folks need this sort of layer, the smart serial port people do, the virtualisers do (because a virtualised tty typically operates at infinite speed rather than emulating 9600 baud). Finally many drivers had invalid and unsafe attempts to avoid buffer overflows by directly invoking tty methods extracted out of the innards of work queue structs. These are no longer needed and all go away. That fixes various random hangs with serial ports on overflow. The other change in here is to optimise the receive_room path that is used by some callers. It turns out that only one ldisc uses receive room except asa constant and it updates it far far less than the value is read. We thus make it a variable not a function call. I expect the code to contain bugs due to the size alone but I'll be watching and squashing them and feeding out new patches as it goes. Because the buffers now dynamically expand you should only run out of buffering when the kernel runs out of memory for real. That means a lot of the horrible hacks high performance drivers used to do just aren't needed any more. Description: tty_insert_flip_char is an old API and continues to work as before, as does tty_flip_buffer_push() [this is why many drivers dont need modification]. It does now also return the number of chars inserted There are also tty_buffer_request_room(tty, len) which asks for a buffer block of the length requested and returns the space found. This improves efficiency with hardware that knows how much to transfer. and tty_insert_flip_string_flags(tty, str, flags, len) to insert a string of characters and flags For a smart interface the usual code is len = tty_request_buffer_room(tty, amount_hardware_says); tty_insert_flip_string(tty, buffer_from_card, len); More description! At the moment tty buffers are attached directly to the tty. This is causing a lot of the problems related to tty layer locking, also problems at high speed and also with bursty data (such as occurs in virtualised environments) I'm working on ripping out the flip buffers and replacing them with a pool of dynamically allocated buffers. This allows both for old style "byte I/O" devices and also helps virtualisation and smart devices where large blocks of data suddenely materialise and need storing. So far so good. Lots of drivers reference tty->flip.*. Several of them also call directly and unsafely into function pointers it provides. This will all break. Most drivers can use tty_insert_flip_char which can be kept as an API but others need more. At the moment I've added the following interfaces, if people think more will be needed now is a good time to say int tty_buffer_request_room(tty, size) Try and ensure at least size bytes are available, returns actual room (may be zero). At the moment it just uses the flipbuf space but that will change. Repeated calls without characters being added are not cumulative. (ie if you call it with 1, 1, 1, and then 4 you'll have four characters of space. The other functions will also try and grow buffers in future but this will be a more efficient way when you know block sizes. int tty_insert_flip_char(tty, ch, flag) As before insert a character if there is room. Now returns 1 for success, 0 for failure. int tty_insert_flip_string(tty, str, len) Insert a block of non error characters. Returns the number inserted. int tty_prepare_flip_string(tty, strptr, len) Adjust the buffer to allow len characters to be added. Returns a buffer pointer in strptr and the length available. This allows for hardware that needs to use functions like insl or mencpy_fromio. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 07:54:13 +03:00
int pasted = 0;
unsigned int count;
struct tty_ldisc *ld;
DECLARE_WAITQUEUE(wait, current);
acquire_console_sem();
poke_blanked_console();
release_console_sem();
ld = tty_ldisc_ref_wait(tty);
add_wait_queue(&vc->paste_wait, &wait);
while (sel_buffer && sel_buffer_lth > pasted) {
set_current_state(TASK_INTERRUPTIBLE);
if (test_bit(TTY_THROTTLED, &tty->flags)) {
schedule();
continue;
}
count = sel_buffer_lth - pasted;
[PATCH] TTY layer buffering revamp The API and code have been through various bits of initial review by serial driver people but they definitely need to live somewhere for a while so the unconverted drivers can get knocked into shape, existing drivers that have been updated can be better tuned and bugs whacked out. This replaces the tty flip buffers with kmalloc objects in rings. In the normal situation for an IRQ driven serial port at typical speeds the behaviour is pretty much the same, two buffers end up allocated and the kernel cycles between them as before. When there are delays or at high speed we now behave far better as the buffer pool can grow a bit rather than lose characters. This also means that we can operate at higher speeds reliably. For drivers that receive characters in blocks (DMA based, USB and especially virtualisation) the layer allows a lot of driver specific code that works around the tty layer with private secondary queues to be removed. The IBM folks need this sort of layer, the smart serial port people do, the virtualisers do (because a virtualised tty typically operates at infinite speed rather than emulating 9600 baud). Finally many drivers had invalid and unsafe attempts to avoid buffer overflows by directly invoking tty methods extracted out of the innards of work queue structs. These are no longer needed and all go away. That fixes various random hangs with serial ports on overflow. The other change in here is to optimise the receive_room path that is used by some callers. It turns out that only one ldisc uses receive room except asa constant and it updates it far far less than the value is read. We thus make it a variable not a function call. I expect the code to contain bugs due to the size alone but I'll be watching and squashing them and feeding out new patches as it goes. Because the buffers now dynamically expand you should only run out of buffering when the kernel runs out of memory for real. That means a lot of the horrible hacks high performance drivers used to do just aren't needed any more. Description: tty_insert_flip_char is an old API and continues to work as before, as does tty_flip_buffer_push() [this is why many drivers dont need modification]. It does now also return the number of chars inserted There are also tty_buffer_request_room(tty, len) which asks for a buffer block of the length requested and returns the space found. This improves efficiency with hardware that knows how much to transfer. and tty_insert_flip_string_flags(tty, str, flags, len) to insert a string of characters and flags For a smart interface the usual code is len = tty_request_buffer_room(tty, amount_hardware_says); tty_insert_flip_string(tty, buffer_from_card, len); More description! At the moment tty buffers are attached directly to the tty. This is causing a lot of the problems related to tty layer locking, also problems at high speed and also with bursty data (such as occurs in virtualised environments) I'm working on ripping out the flip buffers and replacing them with a pool of dynamically allocated buffers. This allows both for old style "byte I/O" devices and also helps virtualisation and smart devices where large blocks of data suddenely materialise and need storing. So far so good. Lots of drivers reference tty->flip.*. Several of them also call directly and unsafely into function pointers it provides. This will all break. Most drivers can use tty_insert_flip_char which can be kept as an API but others need more. At the moment I've added the following interfaces, if people think more will be needed now is a good time to say int tty_buffer_request_room(tty, size) Try and ensure at least size bytes are available, returns actual room (may be zero). At the moment it just uses the flipbuf space but that will change. Repeated calls without characters being added are not cumulative. (ie if you call it with 1, 1, 1, and then 4 you'll have four characters of space. The other functions will also try and grow buffers in future but this will be a more efficient way when you know block sizes. int tty_insert_flip_char(tty, ch, flag) As before insert a character if there is room. Now returns 1 for success, 0 for failure. int tty_insert_flip_string(tty, str, len) Insert a block of non error characters. Returns the number inserted. int tty_prepare_flip_string(tty, strptr, len) Adjust the buffer to allow len characters to be added. Returns a buffer pointer in strptr and the length available. This allows for hardware that needs to use functions like insl or mencpy_fromio. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Paul Fulghum <paulkf@microgate.com> Signed-off-by: Hirokazu Takata <takata@linux-m32r.org> Signed-off-by: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Jeff Dike <jdike@addtoit.com> Signed-off-by: John Hawkes <hawkes@sgi.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-10 07:54:13 +03:00
count = min(count, tty->receive_room);
tty->ldisc.ops->receive_buf(tty, sel_buffer + pasted,
NULL, count);
pasted += count;
}
remove_wait_queue(&vc->paste_wait, &wait);
__set_current_state(TASK_RUNNING);
tty_ldisc_deref(ld);
return 0;
}