WSL2-Linux-Kernel/arch/arm/mach-s5pc100/Kconfig

# Copyright 2009 Samsung Electronics Co.
#	Byungho Min <bhmin@samsung.com>
#
# Licensed under GPLv2

# Configuration options for the S5PC100 CPU

if ARCH_S5PC100

config CPU_S5PC100
	bool
	select PLAT_S5P
	select S5P_EXT_INT
	select S3C_PL330_DMA
	help
	  Enable S5PC100 CPU support

config S5PC100_SETUP_FB_24BPP
	bool
	help
	  Common setup code for S5PC1XX with an 24bpp RGB display helper.

config S5PC100_SETUP_I2C1
	bool
	help
	  Common setup code for i2c bus 1.

config S5PC100_SETUP_IDE
	bool
	help
	  Common setup code for S5PC100 IDE GPIO configurations

config S5PC100_SETUP_SDHCI
	bool
	select S5PC100_SETUP_SDHCI_GPIO
	help
	  Internal helper functions for S5PC100 based SDHCI systems

config S5PC100_SETUP_SDHCI_GPIO
	bool
	help
	  Common setup code for SDHCI gpio.

config MACH_SMDKC100
	bool "SMDKC100"
	select CPU_S5PC100
	select SAMSUNG_DEV_ADC
	select S3C_DEV_FB
	select S3C_DEV_I2C1
	select SAMSUNG_DEV_IDE
	select S3C_DEV_HSMMC
	select S3C_DEV_HSMMC1
	select S3C_DEV_HSMMC2
	select SAMSUNG_DEV_TS
	select S3C_DEV_WDT
	select HAVE_S3C2410_WATCHDOG
	select S5PC100_SETUP_FB_24BPP
	select S5PC100_SETUP_I2C1
	select S5PC100_SETUP_IDE
	select S5PC100_SETUP_SDHCI
	help
	  Machine support for the Samsung SMDKC100

endif
ARM: S5PC100: Kconfigs and Makefiles S5PC100 is a new SoC with ARM coretex-A8 and numerous peripherals. This SoC is successor of S3C64XX. S5PC100 has peripherals which are still similar to S3C families so some drivers in "arch/arm/plat-s3c" can be shared. S5PC100 specific drivers will be added in "arch/arm/plat-s5pcxx" or "arch/arm/mach-s5pc100" Signed-off-by: Byungho Min <bhmin@samsung.com> [ben-linux@fluff.org: tidy and edit description] Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-06-23 16:39:42 +04:00			`# Copyright 2009 Samsung Electronics Co.`
			`# Byungho Min <bhmin@samsung.com>`
			`#`
			`# Licensed under GPLv2`

			`# Configuration options for the S5PC100 CPU`

ARM: SAMSUNG: move S5PC100 support from plat-s5pc1xx to plat-s5p framework This patch moves S5PC100 SoC support to plat-s5p framework. Most periperal support code has been already moved from plat-s5pc1xx to mach-s5pc100. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-20 09:51:08 +04:00			`if ARCH_S5PC100`

ARM: S5PC100: Kconfigs and Makefiles S5PC100 is a new SoC with ARM coretex-A8 and numerous peripherals. This SoC is successor of S3C64XX. S5PC100 has peripherals which are still similar to S3C families so some drivers in "arch/arm/plat-s3c" can be shared. S5PC100 specific drivers will be added in "arch/arm/plat-s5pcxx" or "arch/arm/mach-s5pc100" Signed-off-by: Byungho Min <bhmin@samsung.com> [ben-linux@fluff.org: tidy and edit description] Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-06-23 16:39:42 +04:00			`config CPU_S5PC100`
			`bool`
ARM: SAMSUNG: move S5PC100 support from plat-s5pc1xx to plat-s5p framework This patch moves S5PC100 SoC support to plat-s5p framework. Most periperal support code has been already moved from plat-s5pc1xx to mach-s5pc100. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-20 09:51:08 +04:00			`select PLAT_S5P`
ARM: S5PC100: use common plat-s5p external interrupt code Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-20 09:51:10 +04:00			`select S5P_EXT_INT`
ARM: S5PC100: DMA: Add platform devices for PL330 DMACs Samsung's Soc S5PC100 has three PL330 DMACs. First is dedicated for Memory->Memory data transfer while the other two meant for data transfer with peripherals. Define and add latter two PL330 DMACs as platform devices on the S5PC100 platform. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-18 06:59:13 +04:00			`select S3C_PL330_DMA`
ARM: S5PC100: Kconfigs and Makefiles S5PC100 is a new SoC with ARM coretex-A8 and numerous peripherals. This SoC is successor of S3C64XX. S5PC100 has peripherals which are still similar to S3C families so some drivers in "arch/arm/plat-s3c" can be shared. S5PC100 specific drivers will be added in "arch/arm/plat-s5pcxx" or "arch/arm/mach-s5pc100" Signed-off-by: Byungho Min <bhmin@samsung.com> [ben-linux@fluff.org: tidy and edit description] Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-06-23 16:39:42 +04:00			`help`
			`Enable S5PC100 CPU support`

ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100 Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-18 14:38:43 +04:00			`config S5PC100_SETUP_FB_24BPP`
			`bool`
			`help`
			`Common setup code for S5PC1XX with an 24bpp RGB display helper.`

ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100 Move i2c helpers from plat-s5pc1xx to mach-s5pc100. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-18 14:38:44 +04:00			`config S5PC100_SETUP_I2C1`
			`bool`
			`help`
			`Common setup code for i2c bus 1.`

ARM: S5PC100: Add support for Compact Flash driver on SMDKC100 Following is added for the CF-ATA driver: - Platform data strucure instantiation - Platform device enabling code - Platform-specific gpio setup code Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-06-08 12:02:08 +04:00			`config S5PC100_SETUP_IDE`
			`bool`
			`help`
			`Common setup code for S5PC100 IDE GPIO configurations`

ARM: S5PC100: Move sdhci helpers from plat-s5pc1xx to mach-s5pc100 Move sdhci helpers from plat-s5pc1xx to mach-s5pc100. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-18 14:38:45 +04:00			`config S5PC100_SETUP_SDHCI`
			`bool`
			`select S5PC100_SETUP_SDHCI_GPIO`
			`help`
			`Internal helper functions for S5PC100 based SDHCI systems`

			`config S5PC100_SETUP_SDHCI_GPIO`
			`bool`
			`help`
			`Common setup code for SDHCI gpio.`

ARM: S5PC100: Kconfigs and Makefiles S5PC100 is a new SoC with ARM coretex-A8 and numerous peripherals. This SoC is successor of S3C64XX. S5PC100 has peripherals which are still similar to S3C families so some drivers in "arch/arm/plat-s3c" can be shared. S5PC100 specific drivers will be added in "arch/arm/plat-s5pcxx" or "arch/arm/mach-s5pc100" Signed-off-by: Byungho Min <bhmin@samsung.com> [ben-linux@fluff.org: tidy and edit description] Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-06-23 16:39:42 +04:00			`config MACH_SMDKC100`
			`bool "SMDKC100"`
			`select CPU_S5PC100`
ARM: S5PC100: Add Touchscreen support. This patch adds touchscreen support for S5PC100. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-06-30 16:50:24 +04:00			`select SAMSUNG_DEV_ADC`
SMDKC100: enable S3C FrameBuffer Add required machine definitions for s3c-fb device. A 800x480 lcd device (simmilar to the one known from SMDK6410 boards) has been defined. The lcd controller is attached to GPIO lines and can be enabled/disabled with platform-lcd driver. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-11-17 10:41:20 +03:00			`select S3C_DEV_FB`
SMDKC100: add I2C0 and I2C1 buses support Add required machine definitions for I2C 0 and 1 bus controllers. Currently no I2C device are defined yet. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-11-17 10:41:22 +03:00			`select S3C_DEV_I2C1`
ARM: S5PC100: Add support for Compact Flash driver on SMDKC100 Following is added for the CF-ATA driver: - Platform data strucure instantiation - Platform device enabling code - Platform-specific gpio setup code Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-06-08 12:02:08 +04:00			`select SAMSUNG_DEV_IDE`
SMDKC100: add SDHCI controllers 0, 1 and 2 support Add required machine definitions for SDHCI controller 0, 1 and 2. SMDKC100 has 2 SDHCI/MMC ports. Port 1 is directly connected to controller 0. Port 1 can be conntected to controler 1 or 2, depending on jumper setup. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-11-17 10:41:24 +03:00			`select S3C_DEV_HSMMC`
			`select S3C_DEV_HSMMC1`
			`select S3C_DEV_HSMMC2`
ARM: S5PC100: Add Touchscreen support. This patch adds touchscreen support for S5PC100. Signed-off-by: Naveen Krishna Ch <ch.naveen@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-06-30 16:50:24 +04:00			`select SAMSUNG_DEV_TS`
ARM: S5PC100: Add Watchdog support for S5PC100 This patch adds support for Watchdog timer for Samsung S5PC100. Signed-off-by: Banajit Goswami <banajit.g@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-06-18 10:42:06 +04:00			`select S3C_DEV_WDT`
			`select HAVE_S3C2410_WATCHDOG`
ARM: S5PC100: Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100 Move frame buffer helpers from plat-s5pc1xx to mach-s5pc100. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-18 14:38:43 +04:00			`select S5PC100_SETUP_FB_24BPP`
ARM: S5PC100: Move i2c helpers from plat-s5pc1xx to mach-s5pc100 Move i2c helpers from plat-s5pc1xx to mach-s5pc100. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-18 14:38:44 +04:00			`select S5PC100_SETUP_I2C1`
ARM: S5PC100: Add support for Compact Flash driver on SMDKC100 Following is added for the CF-ATA driver: - Platform data strucure instantiation - Platform device enabling code - Platform-specific gpio setup code Signed-off-by: Abhilash Kesavan <a.kesavan@samsung.com> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> 2010-06-08 12:02:08 +04:00			`select S5PC100_SETUP_IDE`
SMDKC100: add SDHCI controllers 0, 1 and 2 support Add required machine definitions for SDHCI controller 0, 1 and 2. SMDKC100 has 2 SDHCI/MMC ports. Port 1 is directly connected to controller 0. Port 1 can be conntected to controler 1 or 2, depending on jumper setup. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-11-17 10:41:24 +03:00			`select S5PC100_SETUP_SDHCI`
ARM: S5PC100: Kconfigs and Makefiles S5PC100 is a new SoC with ARM coretex-A8 and numerous peripherals. This SoC is successor of S3C64XX. S5PC100 has peripherals which are still similar to S3C families so some drivers in "arch/arm/plat-s3c" can be shared. S5PC100 specific drivers will be added in "arch/arm/plat-s5pcxx" or "arch/arm/mach-s5pc100" Signed-off-by: Byungho Min <bhmin@samsung.com> [ben-linux@fluff.org: tidy and edit description] Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2009-06-23 16:39:42 +04:00			`help`
			`Machine support for the Samsung SMDKC100`
ARM: SAMSUNG: move S5PC100 support from plat-s5pc1xx to plat-s5p framework This patch moves S5PC100 SoC support to plat-s5p framework. Most periperal support code has been already moved from plat-s5pc1xx to mach-s5pc100. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org> 2010-05-20 09:51:08 +04:00
			`endif`