WSL2-Linux-Kernel/arch/arm/boot/dts/dra7.dtsi

1272 строки
32 KiB
Plaintext
Исходник Обычный вид История

/*
* Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
* Based on "omap4.dtsi"
*/
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/dra.h>
#include "skeleton.dtsi"
#define MAX_SOURCES 400
#define DIRECT_IRQ(irq) (MAX_SOURCES + irq)
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "ti,dra7xx";
interrupt-parent = <&gic>;
aliases {
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
i2c3 = &i2c4;
i2c4 = &i2c5;
serial0 = &uart1;
serial1 = &uart2;
serial2 = &uart3;
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
};
timer {
compatible = "arm,armv7-timer";
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
};
gic: interrupt-controller@48211000 {
compatible = "arm,cortex-a15-gic";
interrupt-controller;
#interrupt-cells = <3>;
arm,routable-irqs = <192>;
reg = <0x48211000 0x1000>,
<0x48212000 0x1000>,
<0x48214000 0x2000>,
<0x48216000 0x2000>;
interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
};
/*
* The soc node represents the soc top level view. It is used for IPs
* that are not memory mapped in the MPU view or for the MPU itself.
*/
soc {
compatible = "ti,omap-infra";
mpu {
compatible = "ti,omap5-mpu";
ti,hwmods = "mpu";
};
};
/*
* XXX: Use a flat representation of the SOC interconnect.
* The real OMAP interconnect network is quite complex.
* Since it will not bring real advantage to represent that in DT for
* the moment, just use a fake OCP bus entry to represent the whole bus
* hierarchy.
*/
ocp {
compatible = "ti,dra7-l3-noc", "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
ranges;
ti,hwmods = "l3_main_1", "l3_main_2";
reg = <0x44000000 0x1000000>,
<0x45000000 0x1000>;
interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI DIRECT_IRQ(10) IRQ_TYPE_LEVEL_HIGH>;
prm: prm@4ae06000 {
compatible = "ti,dra7-prm";
reg = <0x4ae06000 0x3000>;
interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
prm_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
prm_clockdomains: clockdomains {
};
};
axi@0 {
compatible = "simple-bus";
#size-cells = <1>;
#address-cells = <1>;
ranges = <0x51000000 0x51000000 0x3000
0x0 0x20000000 0x10000000>;
pcie@51000000 {
compatible = "ti,dra7-pcie";
reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
interrupts = <0 232 0x4>, <0 233 0x4>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x20013000 0x13000 0 0xffed000>;
#interrupt-cells = <1>;
num-lanes = <1>;
ti,hwmods = "pcie1";
phys = <&pcie1_phy>;
phy-names = "pcie-phy0";
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie1_intc 1>,
<0 0 0 2 &pcie1_intc 2>,
<0 0 0 3 &pcie1_intc 3>,
<0 0 0 4 &pcie1_intc 4>;
pcie1_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
};
axi@1 {
compatible = "simple-bus";
#size-cells = <1>;
#address-cells = <1>;
ranges = <0x51800000 0x51800000 0x3000
0x0 0x30000000 0x10000000>;
status = "disabled";
pcie@51000000 {
compatible = "ti,dra7-pcie";
reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
reg-names = "rc_dbics", "ti_conf", "config";
interrupts = <0 355 0x4>, <0 356 0x4>;
#address-cells = <3>;
#size-cells = <2>;
device_type = "pci";
ranges = <0x81000000 0 0 0x03000 0 0x00010000
0x82000000 0 0x30013000 0x13000 0 0xffed000>;
#interrupt-cells = <1>;
num-lanes = <1>;
ti,hwmods = "pcie2";
phys = <&pcie2_phy>;
phy-names = "pcie-phy0";
interrupt-map-mask = <0 0 0 7>;
interrupt-map = <0 0 0 1 &pcie2_intc 1>,
<0 0 0 2 &pcie2_intc 2>,
<0 0 0 3 &pcie2_intc 3>,
<0 0 0 4 &pcie2_intc 4>;
pcie2_intc: interrupt-controller {
interrupt-controller;
#address-cells = <0>;
#interrupt-cells = <1>;
};
};
};
cm_core_aon: cm_core_aon@4a005000 {
compatible = "ti,dra7-cm-core-aon";
reg = <0x4a005000 0x2000>;
cm_core_aon_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
cm_core_aon_clockdomains: clockdomains {
};
};
cm_core: cm_core@4a008000 {
compatible = "ti,dra7-cm-core";
reg = <0x4a008000 0x3000>;
cm_core_clocks: clocks {
#address-cells = <1>;
#size-cells = <0>;
};
cm_core_clockdomains: clockdomains {
};
};
counter32k: counter@4ae04000 {
compatible = "ti,omap-counter32k";
reg = <0x4ae04000 0x40>;
ti,hwmods = "counter_32k";
};
dra7_ctrl_general: tisyscon@4a002e00 {
compatible = "syscon";
reg = <0x4a002e00 0x7c>;
};
pbias_regulator: pbias_regulator {
compatible = "ti,pbias-omap";
reg = <0 0x4>;
syscon = <&dra7_ctrl_general>;
pbias_mmc_reg: pbias_mmc_omap5 {
regulator-name = "pbias_mmc_omap5";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3000000>;
};
};
dra7_pmx_core: pinmux@4a003400 {
compatible = "ti,dra7-padconf", "pinctrl-single";
reg = <0x4a003400 0x0464>;
#address-cells = <1>;
#size-cells = <0>;
#interrupt-cells = <1>;
interrupt-controller;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0x3fffffff>;
};
sdma: dma-controller@4a056000 {
compatible = "ti,omap4430-sdma";
reg = <0x4a056000 0x1000>;
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
#dma-cells = <1>;
#dma-channels = <32>;
#dma-requests = <127>;
};
gpio1: gpio@4ae10000 {
compatible = "ti,omap4-gpio";
reg = <0x4ae10000 0x200>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio1";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio2: gpio@48055000 {
compatible = "ti,omap4-gpio";
reg = <0x48055000 0x200>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio2";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio3: gpio@48057000 {
compatible = "ti,omap4-gpio";
reg = <0x48057000 0x200>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio3";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio4: gpio@48059000 {
compatible = "ti,omap4-gpio";
reg = <0x48059000 0x200>;
interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio4";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio5: gpio@4805b000 {
compatible = "ti,omap4-gpio";
reg = <0x4805b000 0x200>;
interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio5";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio6: gpio@4805d000 {
compatible = "ti,omap4-gpio";
reg = <0x4805d000 0x200>;
interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio6";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio7: gpio@48051000 {
compatible = "ti,omap4-gpio";
reg = <0x48051000 0x200>;
interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio7";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
gpio8: gpio@48053000 {
compatible = "ti,omap4-gpio";
reg = <0x48053000 0x200>;
interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "gpio8";
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
#interrupt-cells = <2>;
};
uart1: serial@4806a000 {
compatible = "ti,omap4-uart";
reg = <0x4806a000 0x100>;
interrupts-extended = <&gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
status = "disabled";
};
uart2: serial@4806c000 {
compatible = "ti,omap4-uart";
reg = <0x4806c000 0x100>;
interrupts-extended = <&gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart2";
clock-frequency = <48000000>;
status = "disabled";
};
uart3: serial@48020000 {
compatible = "ti,omap4-uart";
reg = <0x48020000 0x100>;
interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart3";
clock-frequency = <48000000>;
status = "disabled";
};
uart4: serial@4806e000 {
compatible = "ti,omap4-uart";
reg = <0x4806e000 0x100>;
interrupts-extended = <&gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
};
uart5: serial@48066000 {
compatible = "ti,omap4-uart";
reg = <0x48066000 0x100>;
interrupts-extended = <&gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
};
uart6: serial@48068000 {
compatible = "ti,omap4-uart";
reg = <0x48068000 0x100>;
interrupts-extended = <&gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
};
uart7: serial@48420000 {
compatible = "ti,omap4-uart";
reg = <0x48420000 0x100>;
interrupts-extended = <&gic GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart7";
clock-frequency = <48000000>;
status = "disabled";
};
uart8: serial@48422000 {
compatible = "ti,omap4-uart";
reg = <0x48422000 0x100>;
interrupts-extended = <&gic GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart8";
clock-frequency = <48000000>;
status = "disabled";
};
uart9: serial@48424000 {
compatible = "ti,omap4-uart";
reg = <0x48424000 0x100>;
interrupts-extended = <&gic GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart9";
clock-frequency = <48000000>;
status = "disabled";
};
uart10: serial@4ae2b000 {
compatible = "ti,omap4-uart";
reg = <0x4ae2b000 0x100>;
interrupts-extended = <&gic GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "uart10";
clock-frequency = <48000000>;
status = "disabled";
};
mailbox1: mailbox@4a0f4000 {
compatible = "ti,omap4-mailbox";
reg = <0x4a0f4000 0x200>;
ti,hwmods = "mailbox1";
ti,mbox-num-users = <3>;
ti,mbox-num-fifos = <8>;
status = "disabled";
};
mailbox2: mailbox@4883a000 {
compatible = "ti,omap4-mailbox";
reg = <0x4883a000 0x200>;
ti,hwmods = "mailbox2";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox3: mailbox@4883c000 {
compatible = "ti,omap4-mailbox";
reg = <0x4883c000 0x200>;
ti,hwmods = "mailbox3";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox4: mailbox@4883e000 {
compatible = "ti,omap4-mailbox";
reg = <0x4883e000 0x200>;
ti,hwmods = "mailbox4";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox5: mailbox@48840000 {
compatible = "ti,omap4-mailbox";
reg = <0x48840000 0x200>;
ti,hwmods = "mailbox5";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox6: mailbox@48842000 {
compatible = "ti,omap4-mailbox";
reg = <0x48842000 0x200>;
ti,hwmods = "mailbox6";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox7: mailbox@48844000 {
compatible = "ti,omap4-mailbox";
reg = <0x48844000 0x200>;
ti,hwmods = "mailbox7";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox8: mailbox@48846000 {
compatible = "ti,omap4-mailbox";
reg = <0x48846000 0x200>;
ti,hwmods = "mailbox8";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox9: mailbox@4885e000 {
compatible = "ti,omap4-mailbox";
reg = <0x4885e000 0x200>;
ti,hwmods = "mailbox9";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox10: mailbox@48860000 {
compatible = "ti,omap4-mailbox";
reg = <0x48860000 0x200>;
ti,hwmods = "mailbox10";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox11: mailbox@48862000 {
compatible = "ti,omap4-mailbox";
reg = <0x48862000 0x200>;
ti,hwmods = "mailbox11";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox12: mailbox@48864000 {
compatible = "ti,omap4-mailbox";
reg = <0x48864000 0x200>;
ti,hwmods = "mailbox12";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
mailbox13: mailbox@48802000 {
compatible = "ti,omap4-mailbox";
reg = <0x48802000 0x200>;
ti,hwmods = "mailbox13";
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
};
timer1: timer@4ae18000 {
compatible = "ti,omap5430-timer";
reg = <0x4ae18000 0x80>;
interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer1";
ti,timer-alwon;
};
timer2: timer@48032000 {
compatible = "ti,omap5430-timer";
reg = <0x48032000 0x80>;
interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer2";
};
timer3: timer@48034000 {
compatible = "ti,omap5430-timer";
reg = <0x48034000 0x80>;
interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer3";
};
timer4: timer@48036000 {
compatible = "ti,omap5430-timer";
reg = <0x48036000 0x80>;
interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer4";
};
timer5: timer@48820000 {
compatible = "ti,omap5430-timer";
reg = <0x48820000 0x80>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer5";
ti,timer-dsp;
};
timer6: timer@48822000 {
compatible = "ti,omap5430-timer";
reg = <0x48822000 0x80>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer6";
ti,timer-dsp;
ti,timer-pwm;
};
timer7: timer@48824000 {
compatible = "ti,omap5430-timer";
reg = <0x48824000 0x80>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer7";
ti,timer-dsp;
};
timer8: timer@48826000 {
compatible = "ti,omap5430-timer";
reg = <0x48826000 0x80>;
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer8";
ti,timer-dsp;
ti,timer-pwm;
};
timer9: timer@4803e000 {
compatible = "ti,omap5430-timer";
reg = <0x4803e000 0x80>;
interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer9";
};
timer10: timer@48086000 {
compatible = "ti,omap5430-timer";
reg = <0x48086000 0x80>;
interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer10";
};
timer11: timer@48088000 {
compatible = "ti,omap5430-timer";
reg = <0x48088000 0x80>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer11";
ti,timer-pwm;
};
timer13: timer@48828000 {
compatible = "ti,omap5430-timer";
reg = <0x48828000 0x80>;
interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer13";
status = "disabled";
};
timer14: timer@4882a000 {
compatible = "ti,omap5430-timer";
reg = <0x4882a000 0x80>;
interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer14";
status = "disabled";
};
timer15: timer@4882c000 {
compatible = "ti,omap5430-timer";
reg = <0x4882c000 0x80>;
interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer15";
status = "disabled";
};
timer16: timer@4882e000 {
compatible = "ti,omap5430-timer";
reg = <0x4882e000 0x80>;
interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "timer16";
status = "disabled";
};
wdt2: wdt@4ae14000 {
compatible = "ti,omap4-wdt";
reg = <0x4ae14000 0x80>;
interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "wd_timer2";
};
hwspinlock: spinlock@4a0f6000 {
compatible = "ti,omap4-hwspinlock";
reg = <0x4a0f6000 0x1000>;
ti,hwmods = "spinlock";
#hwlock-cells = <1>;
};
dmm@4e000000 {
compatible = "ti,omap5-dmm";
reg = <0x4e000000 0x800>;
interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "dmm";
};
i2c1: i2c@48070000 {
compatible = "ti,omap4-i2c";
reg = <0x48070000 0x100>;
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c1";
status = "disabled";
};
i2c2: i2c@48072000 {
compatible = "ti,omap4-i2c";
reg = <0x48072000 0x100>;
interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c2";
status = "disabled";
};
i2c3: i2c@48060000 {
compatible = "ti,omap4-i2c";
reg = <0x48060000 0x100>;
interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c3";
status = "disabled";
};
i2c4: i2c@4807a000 {
compatible = "ti,omap4-i2c";
reg = <0x4807a000 0x100>;
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c4";
status = "disabled";
};
i2c5: i2c@4807c000 {
compatible = "ti,omap4-i2c";
reg = <0x4807c000 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "i2c5";
status = "disabled";
};
mmc1: mmc@4809c000 {
compatible = "ti,omap4-hsmmc";
reg = <0x4809c000 0x400>;
interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc1";
ti,dual-volt;
ti,needs-special-reset;
dmas = <&sdma 61>, <&sdma 62>;
dma-names = "tx", "rx";
status = "disabled";
pbias-supply = <&pbias_mmc_reg>;
};
mmc2: mmc@480b4000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480b4000 0x400>;
interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc2";
ti,needs-special-reset;
dmas = <&sdma 47>, <&sdma 48>;
dma-names = "tx", "rx";
status = "disabled";
};
mmc3: mmc@480ad000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480ad000 0x400>;
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc3";
ti,needs-special-reset;
dmas = <&sdma 77>, <&sdma 78>;
dma-names = "tx", "rx";
status = "disabled";
};
mmc4: mmc@480d1000 {
compatible = "ti,omap4-hsmmc";
reg = <0x480d1000 0x400>;
interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mmc4";
ti,needs-special-reset;
dmas = <&sdma 57>, <&sdma 58>;
dma-names = "tx", "rx";
status = "disabled";
};
abb_mpu: regulator-abb-mpu {
compatible = "ti,abb-v3";
regulator-name = "abb_mpu";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
<0x4ae06014 0x4>, <0x4a003b20 0x8>,
<0x4ae0c158 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x80>;
/* LDOVBBMPU_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBMPU_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1060000 0 0x0 0 0x02000000 0x01F00000
1160000 0 0x4 0 0x02000000 0x01F00000
1210000 0 0x8 0 0x02000000 0x01F00000
>;
};
abb_ivahd: regulator-abb-ivahd {
compatible = "ti,abb-v3";
regulator-name = "abb_ivahd";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
<0x4ae06010 0x4>, <0x4a0025cc 0x8>,
<0x4a002470 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x40000000>;
/* LDOVBBIVA_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBIVA_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1055000 0 0x0 0 0x02000000 0x01F00000
1150000 0 0x4 0 0x02000000 0x01F00000
1250000 0 0x8 0 0x02000000 0x01F00000
>;
};
abb_dspeve: regulator-abb-dspeve {
compatible = "ti,abb-v3";
regulator-name = "abb_dspeve";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
<0x4ae06010 0x4>, <0x4a0025e0 0x8>,
<0x4a00246c 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x20000000>;
/* LDOVBBDSPEVE_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBDSPEVE_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1055000 0 0x0 0 0x02000000 0x01F00000
1150000 0 0x4 0 0x02000000 0x01F00000
1250000 0 0x8 0 0x02000000 0x01F00000
>;
};
abb_gpu: regulator-abb-gpu {
compatible = "ti,abb-v3";
regulator-name = "abb_gpu";
#address-cells = <0>;
#size-cells = <0>;
clocks = <&sys_clkin1>;
ti,settling-time = <50>;
ti,clock-cycles = <16>;
reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
<0x4ae06010 0x4>, <0x4a003b08 0x8>,
<0x4ae0c154 0x4>;
reg-names = "setup-address", "control-address",
"int-address", "efuse-address",
"ldo-address";
ti,tranxdone-status-mask = <0x10000000>;
/* LDOVBBGPU_FBB_MUX_CTRL */
ti,ldovbb-override-mask = <0x400>;
/* LDOVBBGPU_FBB_VSET_OUT */
ti,ldovbb-vset-mask = <0x1F>;
/*
* NOTE: only FBB mode used but actual vset will
* determine final biasing
*/
ti,abb_info = <
/*uV ABB efuse rbb_m fbb_m vset_m*/
1090000 0 0x0 0 0x02000000 0x01F00000
1210000 0 0x4 0 0x02000000 0x01F00000
1280000 0 0x8 0 0x02000000 0x01F00000
>;
};
mcspi1: spi@48098000 {
compatible = "ti,omap4-mcspi";
reg = <0x48098000 0x200>;
interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi1";
ti,spi-num-cs = <4>;
dmas = <&sdma 35>,
<&sdma 36>,
<&sdma 37>,
<&sdma 38>,
<&sdma 39>,
<&sdma 40>,
<&sdma 41>,
<&sdma 42>;
dma-names = "tx0", "rx0", "tx1", "rx1",
"tx2", "rx2", "tx3", "rx3";
status = "disabled";
};
mcspi2: spi@4809a000 {
compatible = "ti,omap4-mcspi";
reg = <0x4809a000 0x200>;
interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi2";
ti,spi-num-cs = <2>;
dmas = <&sdma 43>,
<&sdma 44>,
<&sdma 45>,
<&sdma 46>;
dma-names = "tx0", "rx0", "tx1", "rx1";
status = "disabled";
};
mcspi3: spi@480b8000 {
compatible = "ti,omap4-mcspi";
reg = <0x480b8000 0x200>;
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi3";
ti,spi-num-cs = <2>;
dmas = <&sdma 15>, <&sdma 16>;
dma-names = "tx0", "rx0";
status = "disabled";
};
mcspi4: spi@480ba000 {
compatible = "ti,omap4-mcspi";
reg = <0x480ba000 0x200>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "mcspi4";
ti,spi-num-cs = <1>;
dmas = <&sdma 70>, <&sdma 71>;
dma-names = "tx0", "rx0";
status = "disabled";
};
qspi: qspi@4b300000 {
compatible = "ti,dra7xxx-qspi";
reg = <0x4b300000 0x100>;
reg-names = "qspi_base";
#address-cells = <1>;
#size-cells = <0>;
ti,hwmods = "qspi";
clocks = <&qspi_gfclk_div>;
clock-names = "fck";
num-cs = <4>;
interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
omap_control_sata: control-phy@4a002374 {
compatible = "ti,control-phy-pipe3";
reg = <0x4a002374 0x4>;
reg-names = "power";
clocks = <&sys_clkin1>;
clock-names = "sysclk";
};
/* OCP2SCP3 */
ocp2scp@4a090000 {
compatible = "ti,omap-ocp2scp";
#address-cells = <1>;
#size-cells = <1>;
ranges;
reg = <0x4a090000 0x20>;
ti,hwmods = "ocp2scp3";
sata_phy: phy@4A096000 {
compatible = "ti,phy-pipe3-sata";
reg = <0x4A096000 0x80>, /* phy_rx */
<0x4A096400 0x64>, /* phy_tx */
<0x4A096800 0x40>; /* pll_ctrl */
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_sata>;
clocks = <&sys_clkin1>;
clock-names = "sysclk";
#phy-cells = <0>;
};
pcie1_phy: pciephy@4a094000 {
compatible = "ti,phy-pipe3-pcie";
reg = <0x4a094000 0x80>, /* phy_rx */
<0x4a094400 0x64>; /* phy_tx */
reg-names = "phy_rx", "phy_tx";
ctrl-module = <&omap_control_pcie1phy>;
clocks = <&dpll_pcie_ref_ck>,
<&dpll_pcie_ref_m2ldo_ck>,
<&optfclk_pciephy1_32khz>,
<&optfclk_pciephy1_clk>,
<&optfclk_pciephy1_div_clk>,
<&optfclk_pciephy_div>;
clock-names = "dpll_ref", "dpll_ref_m2",
"wkupclk", "refclk",
"div-clk", "phy-div";
#phy-cells = <0>;
id = <1>;
ti,hwmods = "pcie1-phy";
};
pcie2_phy: pciephy@4a095000 {
compatible = "ti,phy-pipe3-pcie";
reg = <0x4a095000 0x80>, /* phy_rx */
<0x4a095400 0x64>; /* phy_tx */
reg-names = "phy_rx", "phy_tx";
ctrl-module = <&omap_control_pcie2phy>;
clocks = <&dpll_pcie_ref_ck>,
<&dpll_pcie_ref_m2ldo_ck>,
<&optfclk_pciephy2_32khz>,
<&optfclk_pciephy2_clk>,
<&optfclk_pciephy2_div_clk>,
<&optfclk_pciephy_div>;
clock-names = "dpll_ref", "dpll_ref_m2",
"wkupclk", "refclk",
"div-clk", "phy-div";
#phy-cells = <0>;
ti,hwmods = "pcie2-phy";
id = <2>;
status = "disabled";
};
};
sata: sata@4a141100 {
compatible = "snps,dwc-ahci";
reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
phys = <&sata_phy>;
phy-names = "sata-phy";
clocks = <&sata_ref_clk>;
ti,hwmods = "sata";
};
omap_control_pcie1phy: control-phy@0x4a003c40 {
compatible = "ti,control-phy-pcie";
reg = <0x4a003c40 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
reg-names = "power", "control_sma", "pcie_pcs";
clocks = <&sys_clkin1>;
clock-names = "sysclk";
};
omap_control_pcie2phy: control-pcie@0x4a003c44 {
compatible = "ti,control-phy-pcie";
reg = <0x4a003c44 0x4>, <0x4a003c14 0x4>, <0x4a003c34 0x4>;
reg-names = "power", "control_sma", "pcie_pcs";
clocks = <&sys_clkin1>;
clock-names = "sysclk";
status = "disabled";
};
omap_control_usb2phy1: control-phy@4a002300 {
compatible = "ti,control-phy-usb2";
reg = <0x4a002300 0x4>;
reg-names = "power";
};
omap_control_usb3phy1: control-phy@4a002370 {
compatible = "ti,control-phy-pipe3";
reg = <0x4a002370 0x4>;
reg-names = "power";
};
omap_control_usb2phy2: control-phy@0x4a002e74 {
compatible = "ti,control-phy-usb2-dra7";
reg = <0x4a002e74 0x4>;
reg-names = "power";
};
/* OCP2SCP1 */
ocp2scp@4a080000 {
compatible = "ti,omap-ocp2scp";
#address-cells = <1>;
#size-cells = <1>;
ranges;
reg = <0x4a080000 0x20>;
ti,hwmods = "ocp2scp1";
usb2_phy1: phy@4a084000 {
compatible = "ti,omap-usb2";
reg = <0x4a084000 0x400>;
ctrl-module = <&omap_control_usb2phy1>;
clocks = <&usb_phy1_always_on_clk32k>,
<&usb_otg_ss1_refclk960m>;
clock-names = "wkupclk",
"refclk";
#phy-cells = <0>;
};
usb2_phy2: phy@4a085000 {
compatible = "ti,omap-usb2";
reg = <0x4a085000 0x400>;
ctrl-module = <&omap_control_usb2phy2>;
clocks = <&usb_phy2_always_on_clk32k>,
<&usb_otg_ss2_refclk960m>;
clock-names = "wkupclk",
"refclk";
#phy-cells = <0>;
};
usb3_phy1: phy@4a084400 {
compatible = "ti,omap-usb3";
reg = <0x4a084400 0x80>,
<0x4a084800 0x64>,
<0x4a084c00 0x40>;
reg-names = "phy_rx", "phy_tx", "pll_ctrl";
ctrl-module = <&omap_control_usb3phy1>;
clocks = <&usb_phy3_always_on_clk32k>,
<&sys_clkin1>,
<&usb_otg_ss1_refclk960m>;
clock-names = "wkupclk",
"sysclk",
"refclk";
#phy-cells = <0>;
};
};
omap_dwc3_1@48880000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss1";
reg = <0x48880000 0x10000>;
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
utmi-mode = <2>;
ranges;
usb1: usb@48890000 {
compatible = "snps,dwc3";
reg = <0x48890000 0x17000>;
interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy1>, <&usb3_phy1>;
phy-names = "usb2-phy", "usb3-phy";
tx-fifo-resize;
maximum-speed = "super-speed";
dr_mode = "otg";
};
};
omap_dwc3_2@488c0000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss2";
reg = <0x488c0000 0x10000>;
interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
utmi-mode = <2>;
ranges;
usb2: usb@488d0000 {
compatible = "snps,dwc3";
reg = <0x488d0000 0x17000>;
interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
phys = <&usb2_phy2>;
phy-names = "usb2-phy";
tx-fifo-resize;
maximum-speed = "high-speed";
dr_mode = "otg";
};
};
/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
omap_dwc3_3@48900000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss3";
reg = <0x48900000 0x10000>;
interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
utmi-mode = <2>;
ranges;
status = "disabled";
usb3: usb@48910000 {
compatible = "snps,dwc3";
reg = <0x48910000 0x17000>;
interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
tx-fifo-resize;
maximum-speed = "high-speed";
dr_mode = "otg";
};
};
omap_dwc3_4@48940000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss4";
reg = <0x48940000 0x10000>;
interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
#address-cells = <1>;
#size-cells = <1>;
utmi-mode = <2>;
ranges;
status = "disabled";
usb4: usb@48950000 {
compatible = "snps,dwc3";
reg = <0x48950000 0x17000>;
interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
tx-fifo-resize;
maximum-speed = "high-speed";
dr_mode = "otg";
};
};
elm: elm@48078000 {
compatible = "ti,am3352-elm";
reg = <0x48078000 0xfc0>; /* device IO registers */
interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "elm";
status = "disabled";
};
gpmc: gpmc@50000000 {
compatible = "ti,am3352-gpmc";
ti,hwmods = "gpmc";
reg = <0x50000000 0x37c>; /* device IO registers */
interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
gpmc,num-cs = <8>;
gpmc,num-waitpins = <2>;
#address-cells = <2>;
#size-cells = <1>;
status = "disabled";
};
atl: atl@4843c000 {
compatible = "ti,dra7-atl";
reg = <0x4843c000 0x3ff>;
ti,hwmods = "atl";
ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
<&atl_clkin2_ck>, <&atl_clkin3_ck>;
clocks = <&atl_gfclk_mux>;
clock-names = "fck";
status = "disabled";
};
First set of .dts changes for omaps for v3.17 merge window: - Enable irqchip crossbar interrupt mapping. These changes are based on an immutable irqchip branch set up by Jason Cooper to make it easier to merge the related .dts changes. - Removal of omap2 related static clock data that now comes from device tree. - Enabling of PHY regulators for various omaps - Enabling of PCIe for dra7 - Add support for am437x starterkit - Enable audio for for omap5 - Enable display and am335x-evmsk -----BEGIN PGP SIGNATURE----- Version: GnuPG v1 iQIcBAABAgAGBQJTxj2LAAoJEBvUPslcq6VzQX0QALzyimJdW8GX+9hV1+LgtiPU eTtR+LxZt1dR5n2EeaNk9dn1DmmNqyQKN5VVB36rdaC2P7NgAfQgOwzG2RBos5mX Nap/DkMYs1NbNrgJCJVaND85HD2ZNyu8+Au2h1ggZC7xoAZbWlIDdR2livo454tf Whdjhm47dCTeIagFxBwAnuVml2Ry7P1pA7Gr8AGteAmsOrUwXdwevC4HqCEAhuG8 2bINI71JhvpJ3tvV12VeJqAEZn7GWU5xnJYt7Kftm6RK8chuC0Ohfmo/BHO2DTVy BPBZDs6fYY8/2lBY/q3UCA3MSqBSLo9lxK+l8n5jaQVPse+6h7uVGijQxQZRcHqf 7oP3tjLeTcszjoiQYSTKcQK65zpu+n7P1UAS4J3IjAoRC7Pi2Qvq5h4ABrxipQMY rctj2GLvNOV4ntx2GceXeyMGQBvu/p6GAFE7jmj0xLO4kBDORaY8PmQySXF81A12 a0cCNL4g/YexeAfYXr4z6gyjGwOK4XbQocDkH9MlqAgQlSsb501tY7Xe2I/aAaYs IN4F5sBdvhBAuP79qFXOnlGgi2VkB3zcfu4MIIzIDxE2ZmPDRKv6oGVSGclVEzTd 4HZsZDu6442zaAQ5XbwwST4gIeCygnqj+qrOQ6uYXAvmt3MFzjZ66bdTZjPMp7cC u7XduFmqLxsoGW7iuqqt =4svh -----END PGP SIGNATURE----- Merge tag 'omap-for-v3.17/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt Merge "omap dts changes for v3.17 merge window, part1" from Tony Lindgren: First set of .dts changes for omaps for v3.17 merge window: - Enable irqchip crossbar interrupt mapping. These changes are based on an immutable irqchip branch set up by Jason Cooper to make it easier to merge the related .dts changes. - Removal of omap2 related static clock data that now comes from device tree. - Enabling of PHY regulators for various omaps - Enabling of PCIe for dra7 - Add support for am437x starterkit - Enable audio for for omap5 - Enable display and am335x-evmsk * tag 'omap-for-v3.17/dt-part1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (43 commits) ARM: DTS: omap5-uevm: Enable basic audio (McPDM <-> twl6040) ARM: DTS: omap5-uevm: Add node for twl6040 audio codec ARM: DTS: omap5-uevm: Enable palmas clk32kgaudio clock ARM: dts: dra7: Add dt data for PCIe controller ARM: dts: dra7: Add dt data for PCIe PHY ARM: dts: dra7: Add dt data for PCIe PHY control module ARM: dts: dra7xx-clocks: Add missing clocks for second PCIe PHY instance ARM: dts: dra7xx-clocks: rename pcie clocks to accommodate second PHY instance ARM: dts: dra7xx-clocks: Add missing 32KHz clocks used for PHY ARM: dts: dra7xx-clocks: Change the parent of apll_pcie_in_clk_mux to dpll_pcie_ref_m2ldo_ck ARM: dts: dra7xx-clocks: Add divider table to optfclk_pciephy_div clock ARM: dts: dra7-evm: Add regulator information to USB2 PHYs ARM: omap2plus_defconfig: enable TPS65218 configs ARM: dts: AM437x: Add TPS65218 device tree nodes ARM: dts: AM437x: Fix i2c nodes indentation ARM: dts: AM43x: Add TPS65218 device tree nodes ARM: dts: Add devicetree for Gumstix Pepper board ARM: dts: dra7: add crossbar device binding ARM: dts: dra7: add routable-irqs property for gic node ARM: OMAP24xx: clock: remove legacy clock data ... Signed-off-by: Olof Johansson <olof@lixom.net>
2014-07-19 09:16:15 +04:00
crossbar_mpu: crossbar@4a020000 {
compatible = "ti,irq-crossbar";
reg = <0x4a002a48 0x130>;
ti,max-irqs = <160>;
ti,max-crossbar-sources = <MAX_SOURCES>;
ti,reg-size = <2>;
ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
ti,irqs-skip = <10 133 139 140>;
ti,irqs-safe-map = <0>;
};
};
};
/include/ "dra7xx-clocks.dtsi"