WSL2-Linux-Kernel/tools/perf/Makefile.config

1277 строки
38 KiB
Makefile
Исходник Обычный вид История

# SPDX-License-Identifier: GPL-2.0-only
ifeq ($(src-perf),)
src-perf := $(srctree)/tools/perf
endif
ifeq ($(obj-perf),)
obj-perf := $(OUTPUT)
endif
ifneq ($(obj-perf),)
obj-perf := $(abspath $(obj-perf))/
endif
$(shell printf "" > $(OUTPUT).config-detected)
detected = $(shell echo "$(1)=y" >> $(OUTPUT).config-detected)
detected_var = $(shell echo "$(1)=$($(1))" >> $(OUTPUT).config-detected)
CFLAGS := $(EXTRA_CFLAGS) $(filter-out -Wnested-externs,$(EXTRA_WARNINGS))
include $(srctree)/tools/scripts/Makefile.arch
$(call detected_var,SRCARCH)
NO_PERF_REGS := 1
perf build: Allow explicitely disabling the NO_SYSCALL_TABLE variable This is useful to see if, on x86, the legacy libaudit still works, as it is used in architectures that don't have the SYSCALL_TABLE logic and we want to have it tested in 'make -C tools/perf/ build-test'. E.g.: Without having audit-libs-devel installed: $ make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build <SNIP> Auto-detecting system features: <SNIP> ... libaudit: [ OFF ] ... libbfd: [ on ] ... libcap: [ on ] <SNIP> Makefile.config:664: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev <SNIP> After installing it: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf $ time make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin ; perf test python make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h' diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h Warning: Kernel ABI header at 'tools/perf/util/hashmap.c' differs from latest version at 'tools/lib/bpf/hashmap.c' diff -u tools/perf/util/hashmap.c tools/lib/bpf/hashmap.c Auto-detecting system features: <SNIP> ... libaudit: [ on ] ... libbfd: [ on ] ... libcap: [ on ] <SNIP> $ ldd ~/bin/perf | grep audit libaudit.so.1 => /lib64/libaudit.so.1 (0x00007fc18978e000) $ Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200529155552.463-3-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 18:03:40 +03:00
ifneq ($(NO_SYSCALL_TABLE),1)
NO_SYSCALL_TABLE := 1
ifeq ($(SRCARCH),x86)
ifeq (${IS_64_BIT}, 1)
NO_SYSCALL_TABLE := 0
endif
else
ifeq ($(SRCARCH),$(filter $(SRCARCH),powerpc arm64 s390 mips))
perf build: Allow explicitely disabling the NO_SYSCALL_TABLE variable This is useful to see if, on x86, the legacy libaudit still works, as it is used in architectures that don't have the SYSCALL_TABLE logic and we want to have it tested in 'make -C tools/perf/ build-test'. E.g.: Without having audit-libs-devel installed: $ make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build <SNIP> Auto-detecting system features: <SNIP> ... libaudit: [ OFF ] ... libbfd: [ on ] ... libcap: [ on ] <SNIP> Makefile.config:664: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev <SNIP> After installing it: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf $ time make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin ; perf test python make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h' diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h Warning: Kernel ABI header at 'tools/perf/util/hashmap.c' differs from latest version at 'tools/lib/bpf/hashmap.c' diff -u tools/perf/util/hashmap.c tools/lib/bpf/hashmap.c Auto-detecting system features: <SNIP> ... libaudit: [ on ] ... libbfd: [ on ] ... libcap: [ on ] <SNIP> $ ldd ~/bin/perf | grep audit libaudit.so.1 => /lib64/libaudit.so.1 (0x00007fc18978e000) $ Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200529155552.463-3-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 18:03:40 +03:00
NO_SYSCALL_TABLE := 0
endif
endif
perf build: Allow explicitely disabling the NO_SYSCALL_TABLE variable This is useful to see if, on x86, the legacy libaudit still works, as it is used in architectures that don't have the SYSCALL_TABLE logic and we want to have it tested in 'make -C tools/perf/ build-test'. E.g.: Without having audit-libs-devel installed: $ make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build <SNIP> Auto-detecting system features: <SNIP> ... libaudit: [ OFF ] ... libbfd: [ on ] ... libcap: [ on ] <SNIP> Makefile.config:664: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev <SNIP> After installing it: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf $ time make NO_SYSCALL_TABLE=1 O=/tmp/build/perf -C tools/perf install-bin ; perf test python make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Warning: Kernel ABI header at 'tools/arch/x86/include/asm/msr-index.h' differs from latest version at 'arch/x86/include/asm/msr-index.h' diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h Warning: Kernel ABI header at 'tools/perf/util/hashmap.h' differs from latest version at 'tools/lib/bpf/hashmap.h' diff -u tools/perf/util/hashmap.h tools/lib/bpf/hashmap.h Warning: Kernel ABI header at 'tools/perf/util/hashmap.c' differs from latest version at 'tools/lib/bpf/hashmap.c' diff -u tools/perf/util/hashmap.c tools/lib/bpf/hashmap.c Auto-detecting system features: <SNIP> ... libaudit: [ on ] ... libbfd: [ on ] ... libcap: [ on ] <SNIP> $ ldd ~/bin/perf | grep audit libaudit.so.1 => /lib64/libaudit.so.1 (0x00007fc18978e000) $ Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lore.kernel.org/lkml/20200529155552.463-3-acme@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-28 18:03:40 +03:00
ifneq ($(NO_SYSCALL_TABLE),1)
CFLAGS += -DHAVE_SYSCALL_TABLE_SUPPORT
endif
endif
tools/perf: Map the ID values with register names Map ID values with corresponding register names. These names are then displayed when user issues perf record with the -I option followed by perf report/script with -D option. To test this patchset, Eg: $ perf record -I ls # record machine state at interrupt $ perf script -D # read the perf.data file Sample output obtained for this patch / output looks like as follows: 496768515470 0x1988 [0x188]: PERF_RECORD_SAMPLE(IP, 0x1): 4522/4522: 0xc0000000001e538c period: 1 addr: 0 ... intr regs: mask 0x7ffffffffff ABI 64-bit .... r0 0xc0000000001e5e34 .... r1 0xc000000fe733f9a0 .... r2 0xc000000001523100 .... r3 0xc000000ffaadeb60 .... r4 0xc000000003456800 .... r5 0x73a9b5e000 .... r6 0x1e000000 .... r7 0x0 .... r8 0x0 .... r9 0x0 .... r10 0x1 .... r11 0x0 .... r12 0x24022822 .... r13 0xc00000000feec180 .... r14 0x0 .... r15 0xc000001e4be18800 .... r16 0x0 .... r17 0xc000000ffaac5000 .... r18 0xc000000fe733f8a0 .... r19 0xc000000001523100 .... r20 0xc00000000009fd1c .... r21 0xc000000fcaa69000 .... r22 0xc0000000001e4968 .... r23 0xc000000001523100 .... r24 0xc000000fe733f850 .... r25 0xc000000fcaa69000 .... r26 0xc000000003b8fcf0 .... r27 0xfffffffffffffead .... r28 0x0 .... r29 0xc000000fcaa69000 .... r30 0x1 .... r31 0x0 .... nip 0xc0000000001dd320 .... msr 0x9000000000009032 .... orig_r3 0xc0000000001e538c .... ctr 0xc00000000009d550 .... link 0xc0000000001e5e34 .... xer 0x0 .... ccr 0x84022882 .... softe 0x0 .... trap 0xf01 .... dar 0x0 .... dsisr 0xf00040060000004 ... thread: :4522:4522 ...... dso: /root/.debug/.build-id/b0/ef11b1a1629e62ac9de75199117ee5ef9469e9 :4522 4522 496.768515: 1 cycles: c0000000001e538c .perf_event_context_sched_in (/boot/vmlinux) Signed-off-by: Anju T <anju@linux.vnet.ibm.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-20 08:02:47 +03:00
# Additional ARCH settings for ppc
ifeq ($(SRCARCH),powerpc)
tools/perf: Map the ID values with register names Map ID values with corresponding register names. These names are then displayed when user issues perf record with the -I option followed by perf report/script with -D option. To test this patchset, Eg: $ perf record -I ls # record machine state at interrupt $ perf script -D # read the perf.data file Sample output obtained for this patch / output looks like as follows: 496768515470 0x1988 [0x188]: PERF_RECORD_SAMPLE(IP, 0x1): 4522/4522: 0xc0000000001e538c period: 1 addr: 0 ... intr regs: mask 0x7ffffffffff ABI 64-bit .... r0 0xc0000000001e5e34 .... r1 0xc000000fe733f9a0 .... r2 0xc000000001523100 .... r3 0xc000000ffaadeb60 .... r4 0xc000000003456800 .... r5 0x73a9b5e000 .... r6 0x1e000000 .... r7 0x0 .... r8 0x0 .... r9 0x0 .... r10 0x1 .... r11 0x0 .... r12 0x24022822 .... r13 0xc00000000feec180 .... r14 0x0 .... r15 0xc000001e4be18800 .... r16 0x0 .... r17 0xc000000ffaac5000 .... r18 0xc000000fe733f8a0 .... r19 0xc000000001523100 .... r20 0xc00000000009fd1c .... r21 0xc000000fcaa69000 .... r22 0xc0000000001e4968 .... r23 0xc000000001523100 .... r24 0xc000000fe733f850 .... r25 0xc000000fcaa69000 .... r26 0xc000000003b8fcf0 .... r27 0xfffffffffffffead .... r28 0x0 .... r29 0xc000000fcaa69000 .... r30 0x1 .... r31 0x0 .... nip 0xc0000000001dd320 .... msr 0x9000000000009032 .... orig_r3 0xc0000000001e538c .... ctr 0xc00000000009d550 .... link 0xc0000000001e5e34 .... xer 0x0 .... ccr 0x84022882 .... softe 0x0 .... trap 0xf01 .... dar 0x0 .... dsisr 0xf00040060000004 ... thread: :4522:4522 ...... dso: /root/.debug/.build-id/b0/ef11b1a1629e62ac9de75199117ee5ef9469e9 :4522 4522 496.768515: 1 cycles: c0000000001e538c .perf_event_context_sched_in (/boot/vmlinux) Signed-off-by: Anju T <anju@linux.vnet.ibm.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-20 08:02:47 +03:00
NO_PERF_REGS := 0
CFLAGS += -I$(OUTPUT)arch/powerpc/include/generated
LIBUNWIND_LIBS := -lunwind -lunwind-ppc64
tools/perf: Map the ID values with register names Map ID values with corresponding register names. These names are then displayed when user issues perf record with the -I option followed by perf report/script with -D option. To test this patchset, Eg: $ perf record -I ls # record machine state at interrupt $ perf script -D # read the perf.data file Sample output obtained for this patch / output looks like as follows: 496768515470 0x1988 [0x188]: PERF_RECORD_SAMPLE(IP, 0x1): 4522/4522: 0xc0000000001e538c period: 1 addr: 0 ... intr regs: mask 0x7ffffffffff ABI 64-bit .... r0 0xc0000000001e5e34 .... r1 0xc000000fe733f9a0 .... r2 0xc000000001523100 .... r3 0xc000000ffaadeb60 .... r4 0xc000000003456800 .... r5 0x73a9b5e000 .... r6 0x1e000000 .... r7 0x0 .... r8 0x0 .... r9 0x0 .... r10 0x1 .... r11 0x0 .... r12 0x24022822 .... r13 0xc00000000feec180 .... r14 0x0 .... r15 0xc000001e4be18800 .... r16 0x0 .... r17 0xc000000ffaac5000 .... r18 0xc000000fe733f8a0 .... r19 0xc000000001523100 .... r20 0xc00000000009fd1c .... r21 0xc000000fcaa69000 .... r22 0xc0000000001e4968 .... r23 0xc000000001523100 .... r24 0xc000000fe733f850 .... r25 0xc000000fcaa69000 .... r26 0xc000000003b8fcf0 .... r27 0xfffffffffffffead .... r28 0x0 .... r29 0xc000000fcaa69000 .... r30 0x1 .... r31 0x0 .... nip 0xc0000000001dd320 .... msr 0x9000000000009032 .... orig_r3 0xc0000000001e538c .... ctr 0xc00000000009d550 .... link 0xc0000000001e5e34 .... xer 0x0 .... ccr 0x84022882 .... softe 0x0 .... trap 0xf01 .... dar 0x0 .... dsisr 0xf00040060000004 ... thread: :4522:4522 ...... dso: /root/.debug/.build-id/b0/ef11b1a1629e62ac9de75199117ee5ef9469e9 :4522 4522 496.768515: 1 cycles: c0000000001e538c .perf_event_context_sched_in (/boot/vmlinux) Signed-off-by: Anju T <anju@linux.vnet.ibm.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2016-02-20 08:02:47 +03:00
endif
# Additional ARCH settings for x86
ifeq ($(SRCARCH),x86)
$(call detected,CONFIG_X86)
perf tools: Fix building error in x86_64 when dwarf unwind is on When build with 'make ARCH=x86' and dwarf unwind is on, there is a compiling error: CC /home/wn/perf/arch/x86/util/unwind-libdw.o CC /home/wn/perf/arch/x86/tests/regs_load.o arch/x86/tests/regs_load.S: Assembler messages: arch/x86/tests/regs_load.S:65: Error: operand type mismatch for `push' arch/x86/tests/regs_load.S:72: Error: operand type mismatch for `pop' make[1]: *** [/home/wn/perf/arch/x86/tests/regs_load.o] Error 1 make[1]: INTERNAL: Exiting with 25 jobserver tokens available; should be 24! make: *** [all] Error 2 ... Which is caused by incorrectly undefine macro HAVE_ARCH_X86_64_SUPPORT. 'config/Makefile.arch' tests __x86_64__ only when 'ARCH=x86_64'. However, when building x86_64 kernel, ARCH=x86 is valid and commonly used. Build systems, such as yocto, uses x86_64 compiler with 'ARCH=x86' to build x86_64 perf, which causes mismatching. As __LP64__ is defined for x86_64 as well, we can consolidate the __x86_64__ check to the __LP64__ check and get rid of the IS_X86_64 IMHO. (This patch is made by Namhyung Kim when replying my v1 patch: https://lkml.org/lkml/2015/1/7/17 I modified the code to remove dependency on RAW_ARCH: https://lkml.org/lkml/2015/1/7/865 Namhyung Kim didn't provide his SOB in his original email. I add mine only for my modification.) Signed-off-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Li Zefan <lizefan@huawei.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Link: http://lkml.kernel.org/r/1421029255-23039-1-git-send-email-wangnan0@huawei.com [ Namhyung provided his S-o-B on a followup to this patch thread on lkml ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-01-12 05:20:55 +03:00
ifeq (${IS_64_BIT}, 1)
CFLAGS += -DHAVE_ARCH_X86_64_SUPPORT -I$(OUTPUT)arch/x86/include/generated
ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S ../../arch/x86/lib/memset_64.S
LIBUNWIND_LIBS = -lunwind-x86_64 -lunwind -llzma
$(call detected,CONFIG_X86_64)
else
LIBUNWIND_LIBS = -lunwind-x86 -llzma -lunwind
endif
NO_PERF_REGS := 0
endif
ifeq ($(SRCARCH),arm)
NO_PERF_REGS := 0
LIBUNWIND_LIBS = -lunwind -lunwind-arm
endif
ifeq ($(SRCARCH),arm64)
NO_PERF_REGS := 0
CFLAGS += -I$(OUTPUT)arch/arm64/include/generated
LIBUNWIND_LIBS = -lunwind -lunwind-aarch64
endif
ifeq ($(SRCARCH),riscv)
NO_PERF_REGS := 0
endif
ifeq ($(SRCARCH),csky)
NO_PERF_REGS := 0
endif
ifeq ($(ARCH),s390)
NO_PERF_REGS := 0
CFLAGS += -fPIC -I$(OUTPUT)arch/s390/include/generated
endif
perf tools: Support MIPS unwinding and dwarf-regs Map perf APIs (perf_reg_name/get_arch_regstr/unwind__arch_reg_id) with MIPS specific registers. [ayan@wavecomp.com: repick this patch for unwinding userstack backtrace by perf and libunwind on MIPS based CPU.] [yangtiezhu@loongson.cn: Add sample_reg_masks[] to fix build error, silence some checkpatch errors and warnings, and also separate the original patches into two parts (MIPS kernel and perf tools) to merge easily.] The original patches: https://lore.kernel.org/patchwork/patch/1126521/ https://lore.kernel.org/patchwork/patch/1126520/ Committer notes: Do it as __perf_reg_name() to cope with: 067012974c8ae31a ("perf tools: Fix arm64 build error with gcc-11") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Archer Yan <ayan@wavecomp.com> Cc: David Daney <david.daney@cavium.com> Cc: Jianlin Lv <Jianlin.Lv@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Juxin Gao <gaojuxin@loongson.cn> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Xuefeng Li <lixuefeng@loongson.cn> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Link: http://lore.kernel.org/lkml/1612409724-3516-3-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Archer Yan <ayan@wavecomp.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-04 06:35:23 +03:00
ifeq ($(ARCH),mips)
NO_PERF_REGS := 0
CFLAGS += -I$(OUTPUT)arch/mips/include/generated
perf tools: Support MIPS unwinding and dwarf-regs Map perf APIs (perf_reg_name/get_arch_regstr/unwind__arch_reg_id) with MIPS specific registers. [ayan@wavecomp.com: repick this patch for unwinding userstack backtrace by perf and libunwind on MIPS based CPU.] [yangtiezhu@loongson.cn: Add sample_reg_masks[] to fix build error, silence some checkpatch errors and warnings, and also separate the original patches into two parts (MIPS kernel and perf tools) to merge easily.] The original patches: https://lore.kernel.org/patchwork/patch/1126521/ https://lore.kernel.org/patchwork/patch/1126520/ Committer notes: Do it as __perf_reg_name() to cope with: 067012974c8ae31a ("perf tools: Fix arm64 build error with gcc-11") Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Archer Yan <ayan@wavecomp.com> Cc: David Daney <david.daney@cavium.com> Cc: Jianlin Lv <Jianlin.Lv@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Juxin Gao <gaojuxin@loongson.cn> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Xuefeng Li <lixuefeng@loongson.cn> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@vger.kernel.org Link: http://lore.kernel.org/lkml/1612409724-3516-3-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Archer Yan <ayan@wavecomp.com> Signed-off-by: David Daney <david.daney@cavium.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-02-04 06:35:23 +03:00
LIBUNWIND_LIBS = -lunwind -lunwind-mips
endif
ifeq ($(NO_PERF_REGS),0)
$(call detected,CONFIG_PERF_REGS)
endif
# So far there's only x86 and arm libdw unwind support merged in perf.
# Disable it on all other architectures in case libdw unwind
# support is detected in system. Add supported architectures
# to the check.
ifneq ($(SRCARCH),$(filter $(SRCARCH),x86 arm arm64 powerpc s390 csky riscv))
NO_LIBDW_DWARF_UNWIND := 1
endif
ifeq ($(LIBUNWIND_LIBS),)
NO_LIBUNWIND := 1
endif
#
# For linking with debug library, run like:
#
# make DEBUG=1 LIBUNWIND_DIR=/opt/libunwind/
#
libunwind_arch_set_flags = $(eval $(libunwind_arch_set_flags_code))
define libunwind_arch_set_flags_code
FEATURE_CHECK_CFLAGS-libunwind-$(1) = -I$(LIBUNWIND_DIR)/include
FEATURE_CHECK_LDFLAGS-libunwind-$(1) = -L$(LIBUNWIND_DIR)/lib
endef
ifdef LIBUNWIND_DIR
LIBUNWIND_CFLAGS = -I$(LIBUNWIND_DIR)/include
LIBUNWIND_LDFLAGS = -L$(LIBUNWIND_DIR)/lib
LIBUNWIND_ARCHS = x86 x86_64 arm aarch64 debug-frame-arm debug-frame-aarch64
$(foreach libunwind_arch,$(LIBUNWIND_ARCHS),$(call libunwind_arch_set_flags,$(libunwind_arch)))
endif
# Set per-feature check compilation flags
FEATURE_CHECK_CFLAGS-libunwind = $(LIBUNWIND_CFLAGS)
FEATURE_CHECK_LDFLAGS-libunwind = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS)
FEATURE_CHECK_CFLAGS-libunwind-debug-frame = $(LIBUNWIND_CFLAGS)
FEATURE_CHECK_LDFLAGS-libunwind-debug-frame = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS)
perf unwind: Do not overwrite FEATURE_CHECK_LDFLAGS-libunwind-{x86,aarch64} When setting LIBUNWIND_DIR, we first set FEATURE_CHECK_LDFLAGS-libunwind-{aarch64,x86} = -L$(LIBUNWIND_DIR)/lib. <committer note> This happens a bit before, the overwritting, in: libunwind_arch_set_flags = $(eval $(libunwind_arch_set_flags_code)) define libunwind_arch_set_flags_code FEATURE_CHECK_CFLAGS-libunwind-$(1) = -I$(LIBUNWIND_DIR)/include FEATURE_CHECK_LDFLAGS-libunwind-$(1) = -L$(LIBUNWIND_DIR)/lib endef ifdef LIBUNWIND_DIR LIBUNWIND_CFLAGS = -I$(LIBUNWIND_DIR)/include LIBUNWIND_LDFLAGS = -L$(LIBUNWIND_DIR)/lib LIBUNWIND_ARCHS = x86 x86_64 arm aarch64 debug-frame-arm debug-frame-aarch64 $(foreach libunwind_arch,$(LIBUNWIND_ARCHS),$(call libunwind_arch_set_flags,$(libunwind_arch))) endif Look at that 'foreach' on all the LIBUNWIND_ARCHS. </> After commit 5c4d7c82c0dc ("perf unwind: Do not put libunwind-{x86,aarch64} in FEATURE_TESTS_BASIC"), FEATURE_CHECK_LDFLAGS-libunwind-{x86,aarch64} is overwritten. As a result, the remote libunwind libraries cannot be searched from $(LIBUNWIND_DIR)/lib directory during feature check tests. Fix it with variable appending. Before this patch: perf$ make VF=1 LIBUNWIND_DIR=/opt/libunwind_aarch64 BUILD: Doing 'make -j16' parallel build <SNIP> ... ... libopencsd: [ OFF ] ... libunwind-x86: [ OFF ] ... libunwind-x86_64: [ OFF ] ... libunwind-arm: [ OFF ] ... libunwind-aarch64: [ OFF ] ... libunwind-debug-frame: [ OFF ] ... libunwind-debug-frame-arm: [ OFF ] ... libunwind-debug-frame-aarch64: [ OFF ] ... cxx: [ OFF ] <SNIP> perf$ cat ../build/feature/test-libunwind-aarch64.make.output /usr/bin/ld: cannot find -lunwind-aarch64 /usr/bin/ld: cannot find -lunwind-aarch64 collect2: error: ld returned 1 exit status After this patch: perf$ make VF=1 LIBUNWIND_DIR=/opt/libunwind_aarch64 BUILD: Doing 'make -j16' parallel build <SNIP> ... libopencsd: [ OFF ] ... libunwind-x86: [ OFF ] ... libunwind-x86_64: [ OFF ] ... libunwind-arm: [ OFF ] ... libunwind-aarch64: [ on ] ... libunwind-debug-frame: [ OFF ] ... libunwind-debug-frame-arm: [ OFF ] ... libunwind-debug-frame-aarch64: [ OFF ] ... cxx: [ OFF ] <SNIP> perf$ cat ../build/feature/test-libunwind-aarch64.make.output perf$ ldd ./perf linux-vdso.so.1 (0x00007ffdf07da000) libpthread.so.0 => /lib/x86_64-linux-gnu/libpthread.so.0 (0x00007f30953dc000) librt.so.1 => /lib/x86_64-linux-gnu/librt.so.1 (0x00007f30951d4000) libm.so.6 => /lib/x86_64-linux-gnu/libm.so.6 (0x00007f3094e36000) libdl.so.2 => /lib/x86_64-linux-gnu/libdl.so.2 (0x00007f3094c32000) libelf.so.1 => /usr/lib/x86_64-linux-gnu/libelf.so.1 (0x00007f3094a18000) libdw.so.1 => /usr/lib/x86_64-linux-gnu/libdw.so.1 (0x00007f30947cc000) libunwind-x86_64.so.8 => /usr/lib/x86_64-linux-gnu/libunwind-x86_64.so.8 (0x00007f30945ad000) libunwind.so.8 => /usr/lib/x86_64-linux-gnu/libunwind.so.8 (0x00007f3094392000) liblzma.so.5 => /lib/x86_64-linux-gnu/liblzma.so.5 (0x00007f309416c000) libunwind-aarch64.so.8 => not found libslang.so.2 => /lib/x86_64-linux-gnu/libslang.so.2 (0x00007f3093c8a000) libpython2.7.so.1.0 => /usr/local/lib/libpython2.7.so.1.0 (0x00007f309386b000) libz.so.1 => /lib/x86_64-linux-gnu/libz.so.1 (0x00007f309364e000) libnuma.so.1 => /usr/lib/x86_64-linux-gnu/libnuma.so.1 (0x00007f3093443000) libc.so.6 => /lib/x86_64-linux-gnu/libc.so.6 (0x00007f3093052000) /lib64/ld-linux-x86-64.so.2 (0x00007f3096097000) libbz2.so.1.0 => /lib/x86_64-linux-gnu/libbz2.so.1.0 (0x00007f3092e42000) libutil.so.1 => /lib/x86_64-linux-gnu/libutil.so.1 (0x00007f3092c3f000) Fixes: 5c4d7c82c0dceccf ("perf unwind: Do not put libunwind-{x86,aarch64} in FEATURE_TESTS_BASIC") Signed-off-by: Li Huafei <lihuafei1@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Zhang Jinhao <zhangjinhao2@huawei.com> Link: http://lore.kernel.org/lkml/20210823134340.60955-1-lihuafei1@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-08-23 16:43:40 +03:00
FEATURE_CHECK_LDFLAGS-libunwind-arm += -lunwind -lunwind-arm
FEATURE_CHECK_LDFLAGS-libunwind-aarch64 += -lunwind -lunwind-aarch64
FEATURE_CHECK_LDFLAGS-libunwind-x86 += -lunwind -llzma -lunwind-x86
FEATURE_CHECK_LDFLAGS-libunwind-x86_64 += -lunwind -llzma -lunwind-x86_64
perf unwind: Do not put libunwind-{x86,aarch64} in FEATURE_TESTS_BASIC As it is not normally available on x86_64 not being tested on test-all.c but being in FEATURE_TESTS_BASIC ends up implying that those features are present, which leads to trying to link with those libraries and a build failure now that test-all.c is finally again building successfully: /usr/bin/ld: cannot find -lunwind-x86 /usr/bin/ld: cannot find -lunwind-aarch64 collect2: error: ld returned 1 exit status make[3]: *** [Makefile:199: /tmp/build/perf/plugin_jbd2.so] Error 1 make[3]: *** Waiting for unfinished jobs.... /usr/bin/ld: cannot find -lunwind-x86 /usr/bin/ld: cannot find -lunwind-aarch64 So remove those features from there and explicitely test them. And then move this patch to just before the last one that allows this to be exposed, so that we keep the tree bisectable. With all this in place we get, at this point: $ ldd /tmp/build/perf/feature/test-libunwind.bin linux-vdso.so.1 (0x00007fffa09c6000) libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007fbcf4451000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007fbcf4435000) liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fbcf440c000) libelf.so.1 => /lib64/libelf.so.1 (0x00007fbcf43f2000) libc.so.6 => /lib64/libc.so.6 (0x00007fbcf422c000) libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fbcf4211000) /lib64/ld-linux-x86-64.so.2 (0x00007fbcf4491000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fbcf41ed000) libz.so.1 => /lib64/libz.so.1 (0x00007fbcf41d3000) $ cat /tmp/build/perf/feature/test-libunwind-x86.make.output test-libunwind-x86.c:2:10: fatal error: libunwind-x86.h: No such file or directory #include <libunwind-x86.h> ^~~~~~~~~~~~~~~~~ compilation terminated. $ cat /tmp/build/perf/feature/test-libunwind-aarch64.make.output test-libunwind-aarch64.c:2:10: fatal error: libunwind-aarch64.h: No such file or directory #include <libunwind-aarch64.h> ^~~~~~~~~~~~~~~~~~~~~ compilation terminated. $ $ ldd ~/bin/perf | grep unwind libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f5ceb24b000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f5ceb22f000) $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/n/tip-vs6kwqsvwk7oxhs6z9mq87pp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-12 22:34:32 +03:00
perf build: Add missing FEATURE_CHECK_LDFLAGS-libcrypto When the libcrypto feature test was added we forgot to add its FEATURE_CHECK_LDFLAGS pointing to the library needed to link with the test-all.bin feature test fast path binary, so even when it was introduced we got this: $ cat /tmp/build/perf/feature/test-all.make.output /usr/bin/ld: /tmp/ccjKeJJU.o: in function `main_test_libcrypto': /home/acme/git/perf/tools/build/feature/test-libcrypto.c:10: undefined reference to `MD5_Init' /usr/bin/ld: /home/acme/git/perf/tools/build/feature/test-libcrypto.c:11: undefined reference to `MD5_Update' /usr/bin/ld: /home/acme/git/perf/tools/build/feature/test-libcrypto.c:12: undefined reference to `MD5_Final' /usr/bin/ld: /home/acme/git/perf/tools/build/feature/test-libcrypto.c:14: undefined reference to `SHA1' collect2: error: ld returned 1 exit status $ cat /tmp/build/perf/feature/test-libcrypto. test-libcrypto.bin test-libcrypto.d test-libcrypto.make.output $ cat /tmp/build/perf/feature/test-libcrypto.make.output $ Fix it, so that we keep the fast path, which, at this point, will fail with the unwind-ARCH feature tests, that will be fixed in a followup patch: $ make -C tools/perf O=/tmp/build/perf ... libcrypto: [ on ] <SNIP> $ cat /tmp/build/perf/feature/test-all.make.output $ ldd /tmp/build/perf/feature/test-all.bin | grep libcrypto libcrypto.so.1.1 => /lib64/libcrypto.so.1.1 (0x00007f9892805000) $ $ grep libcrypto /tmp/build/perf/FEATURE-DUMP feature-libcrypto=1 $ With the unwind-ARCH tests fixed, we now finally manage to get test-all.bin built and linked with the features it tests, among them the ones fixed in this patchkit: $ ldd /tmp/build/perf/feature/test-all.bin | egrep 'unwind|crypto' libcrypto.so.1.1 => /lib64/libcrypto.so.1.1 (0x00007f95cf2b8000) libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f95cf294000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f95cf278000) $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Carl Love <cel@us.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: John McCutchan <johnmccutchan@google.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sonny Rao <sonnyrao@chromium.org> Cc: Stephane Eranian <eranian@google.com> Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Fixes: 8ee4646038e4 ("perf build: Add libcrypto feature detection") Link: https://lkml.kernel.org/n/tip-rexc248jorf5b4l3qjn888cz@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-12 22:19:45 +03:00
FEATURE_CHECK_LDFLAGS-libcrypto = -lcrypto
ifdef CSINCLUDES
LIBOPENCSD_CFLAGS := -I$(CSINCLUDES)
endif
OPENCSDLIBS := -lopencsd_c_api -lopencsd -lstdc++
ifdef CSLIBS
LIBOPENCSD_LDFLAGS := -L$(CSLIBS)
endif
FEATURE_CHECK_CFLAGS-libopencsd := $(LIBOPENCSD_CFLAGS)
FEATURE_CHECK_LDFLAGS-libopencsd := $(LIBOPENCSD_LDFLAGS) $(OPENCSDLIBS)
ifeq ($(NO_PERF_REGS),0)
CFLAGS += -DHAVE_PERF_REGS_SUPPORT
endif
# for linking with debug library, run like:
# make DEBUG=1 LIBDW_DIR=/opt/libdw/
ifdef LIBDW_DIR
LIBDW_CFLAGS := -I$(LIBDW_DIR)/include
LIBDW_LDFLAGS := -L$(LIBDW_DIR)/lib
endif
DWARFLIBS := -ldw
ifeq ($(findstring -static,${LDFLAGS}),-static)
DWARFLIBS += -lelf -lebl -ldl -lz -llzma -lbz2
endif
FEATURE_CHECK_CFLAGS-libdw-dwarf-unwind := $(LIBDW_CFLAGS)
FEATURE_CHECK_LDFLAGS-libdw-dwarf-unwind := $(LIBDW_LDFLAGS) $(DWARFLIBS)
# for linking with debug library, run like:
# make DEBUG=1 LIBBABELTRACE_DIR=/opt/libbabeltrace/
ifdef LIBBABELTRACE_DIR
LIBBABELTRACE_CFLAGS := -I$(LIBBABELTRACE_DIR)/include
LIBBABELTRACE_LDFLAGS := -L$(LIBBABELTRACE_DIR)/lib
perf tools: Add feature check for libbabeltrace Adding feature check for babeltrace library [1], which will be used for perf data file CTF [2] conversion in following patches. The babeltrace library is now automatically detected as standard feature. It's possible to specify LIBBABELTRACE_DIR make variable to specify location of installed libbabeltrace, like: $ make LIBBABELTRACE_DIR=/opt/libbabeltrace/ BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libbabeltrace: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... DWARF post unwind library: libunwind NOTE The installation of the [1] to to used by above make: $ git clone git://git.efficios.com/babeltrace.git $ cd babeltrace $ vim README $ ./bootstrap $ ./configure --prefix=/opt/libbabeltrace $ make prefix=/opt/libbabeltrace $ sudo make install prefix=/opt/libbabeltrace Please make sure that the /opt/libbabeltrace/lib directory is in your LD_LIBRARY_PATH: $ export LD_LIBRARY_PATH=/opt/libbabeltrace/lib [1] babeltrace - http://www.efficios.com/babeltrace [2] Common Trace Format - http://www.efficios.com/ctf Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-2-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ Added missing babeltrace build instructions ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 01:16:58 +03:00
endif
FEATURE_CHECK_CFLAGS-libbabeltrace := $(LIBBABELTRACE_CFLAGS)
FEATURE_CHECK_LDFLAGS-libbabeltrace := $(LIBBABELTRACE_LDFLAGS) -lbabeltrace-ctf
perf tools: Add feature check for libbabeltrace Adding feature check for babeltrace library [1], which will be used for perf data file CTF [2] conversion in following patches. The babeltrace library is now automatically detected as standard feature. It's possible to specify LIBBABELTRACE_DIR make variable to specify location of installed libbabeltrace, like: $ make LIBBABELTRACE_DIR=/opt/libbabeltrace/ BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libbabeltrace: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... DWARF post unwind library: libunwind NOTE The installation of the [1] to to used by above make: $ git clone git://git.efficios.com/babeltrace.git $ cd babeltrace $ vim README $ ./bootstrap $ ./configure --prefix=/opt/libbabeltrace $ make prefix=/opt/libbabeltrace $ sudo make install prefix=/opt/libbabeltrace Please make sure that the /opt/libbabeltrace/lib directory is in your LD_LIBRARY_PATH: $ export LD_LIBRARY_PATH=/opt/libbabeltrace/lib [1] babeltrace - http://www.efficios.com/babeltrace [2] Common Trace Format - http://www.efficios.com/ctf Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-2-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ Added missing babeltrace build instructions ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 01:16:58 +03:00
ifdef LIBZSTD_DIR
LIBZSTD_CFLAGS := -I$(LIBZSTD_DIR)/lib
LIBZSTD_LDFLAGS := -L$(LIBZSTD_DIR)/lib
endif
FEATURE_CHECK_CFLAGS-libzstd := $(LIBZSTD_CFLAGS)
FEATURE_CHECK_LDFLAGS-libzstd := $(LIBZSTD_LDFLAGS)
FEATURE_CHECK_CFLAGS-bpf = -I. -I$(srctree)/tools/include -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi -I$(srctree)/tools/include/uapi
# include ARCH specific config
-include $(src-perf)/arch/$(SRCARCH)/Makefile
ifdef PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
CFLAGS += -DHAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
endif
include $(srctree)/tools/scripts/utilities.mak
ifeq ($(call get-executable,$(FLEX)),)
dummy := $(error Error: $(FLEX) is missing on this system, please install it)
endif
ifeq ($(call get-executable,$(BISON)),)
dummy := $(error Error: $(BISON) is missing on this system, please install it)
endif
ifneq ($(OUTPUT),)
ifeq ($(shell expr $(shell $(BISON) --version | grep bison | sed -e 's/.\+ \([0-9]\+\).\([0-9]\+\).\([0-9]\+\)/\1\2\3/g') \>\= 371), 1)
BISON_FILE_PREFIX_MAP := --file-prefix-map=$(OUTPUT)=
endif
endif
# Treat warnings as errors unless directed not to
ifneq ($(WERROR),0)
CORE_CFLAGS += -Werror
CXXFLAGS += -Werror
endif
ifndef DEBUG
DEBUG := 0
endif
ifeq ($(DEBUG),0)
ifeq ($(CC_NO_CLANG), 0)
CORE_CFLAGS += -O3
else
CORE_CFLAGS += -O6
endif
endif
ifdef PARSER_DEBUG
PARSER_DEBUG_BISON := -t
PARSER_DEBUG_FLEX := -d
CFLAGS += -DPARSER_DEBUG
$(call detected_var,PARSER_DEBUG_BISON)
$(call detected_var,PARSER_DEBUG_FLEX)
endif
# Try different combinations to accommodate systems that only have
# python[2][-config] in weird combinations but always preferring
perf python: Autodetect python3 binary Some distros don't come with python2 and only have python3 available. This causes the "'import perf' in python" self test to fail. This change adds python3 to the list of possible python versions that are autodetected but maintains the priorities for 'python2' and 'python' detection. Python3 has the lowest priority. Committer notes: On a fedora system without python2 packages the 'perf test python' continues to work: # python2 bash: python2: command not found... Similar command is: 'python' # rpm -qa | grep python2 # That "Similar command" gives the clue: # rpm -qf /usr/bin/python python-unversioned-command-3.8.5-5.fc32.noarch # rpm -ql python-unversioned-command /usr/bin/python /usr/share/man/man1/python.1.gz # With it in place the 'python' binary is found and perf builds the python binding using python3: # perf test -v python 19: 'import perf' in python : --- start --- test child forked, pid 379988 python usage test: "echo "import sys ; sys.path.append('/tmp/build/perf/python'); import perf" | '/usr/bin/python' " test child finished with 0 ---- end ---- 'import perf' in python: Ok # Looking at that path: # ls -la /tmp/build/perf/python total 1864 drwxrwxr-x. 2 acme acme 60 Oct 13 16:20 . drwxrwxr-x. 18 acme acme 4420 Oct 13 16:28 .. -rwxrwxr-x. 1 acme acme 1907216 Oct 13 16:28 perf.cpython-38-x86_64-linux-gnu.so # And: # ldd ~/bin/perf | grep python libpython3.8.so.1.0 => /lib64/libpython3.8.so.1.0 (0x00007f5471187000) # As soon as we remove it: # rpm -e python-unversioned-command-3.8.5-5.fc32.noarch # hash -r # python bash: python: command not found... Install package 'python-unversioned-command' to provide command 'python'? [N/y] n # And rebuilding perf now doesn't find python in the system: make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j24' parallel build <SNIP> Makefile.config:786: No python interpreter was found: disables Python support - please install python-devel/python-dev <SNIP> After this patch: $ rpm -qi python-unversioned-command package python-unversioned-command is not installed $ $ python bash: python: command not found... Install package 'python-unversioned-command' to provide command 'python'? [N/y] ^C $ $ m make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j24' parallel build <SNIP> CC /tmp/build/perf/tests/attr.o CC /tmp/build/perf/tests/python-use.o DESCEND plugins GEN /tmp/build/perf/python/perf.so INSTALL trace_plugins LD /tmp/build/perf/tests/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> make: Leaving directory '/home/acme/git/perf/tools/perf' 19: 'import perf' in python : Ok $ ldd ~/bin/perf | grep python libpython3.8.so.1.0 => /lib64/libpython3.8.so.1.0 (0x00007f2c8c708000) $ ls -la /tmp/build/perf/python total 1864 drwxrwxr-x. 2 acme acme 60 Oct 13 16:20 . drwxrwxr-x. 18 acme acme 4420 Oct 13 16:31 .. -rwxrwxr-x. 1 acme acme 1907216 Oct 13 16:31 perf.cpython-38-x86_64-linux-gnu.so $ Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> LPU-Reference: 20201005080645.6588-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-05 11:06:45 +03:00
# python2 and python2-config as per pep-0394. If python2 or python
# aren't found, then python3 is used.
PYTHON_AUTO := python
PYTHON_AUTO := $(if $(call get-executable,python3),python3,$(PYTHON_AUTO))
PYTHON_AUTO := $(if $(call get-executable,python),python,$(PYTHON_AUTO))
PYTHON_AUTO := $(if $(call get-executable,python2),python2,$(PYTHON_AUTO))
override PYTHON := $(call get-executable-or-default,PYTHON,$(PYTHON_AUTO))
PYTHON_AUTO_CONFIG := \
$(if $(call get-executable,$(PYTHON)-config),$(PYTHON)-config,python-config)
override PYTHON_CONFIG := \
perf python: Autodetect python3 binary Some distros don't come with python2 and only have python3 available. This causes the "'import perf' in python" self test to fail. This change adds python3 to the list of possible python versions that are autodetected but maintains the priorities for 'python2' and 'python' detection. Python3 has the lowest priority. Committer notes: On a fedora system without python2 packages the 'perf test python' continues to work: # python2 bash: python2: command not found... Similar command is: 'python' # rpm -qa | grep python2 # That "Similar command" gives the clue: # rpm -qf /usr/bin/python python-unversioned-command-3.8.5-5.fc32.noarch # rpm -ql python-unversioned-command /usr/bin/python /usr/share/man/man1/python.1.gz # With it in place the 'python' binary is found and perf builds the python binding using python3: # perf test -v python 19: 'import perf' in python : --- start --- test child forked, pid 379988 python usage test: "echo "import sys ; sys.path.append('/tmp/build/perf/python'); import perf" | '/usr/bin/python' " test child finished with 0 ---- end ---- 'import perf' in python: Ok # Looking at that path: # ls -la /tmp/build/perf/python total 1864 drwxrwxr-x. 2 acme acme 60 Oct 13 16:20 . drwxrwxr-x. 18 acme acme 4420 Oct 13 16:28 .. -rwxrwxr-x. 1 acme acme 1907216 Oct 13 16:28 perf.cpython-38-x86_64-linux-gnu.so # And: # ldd ~/bin/perf | grep python libpython3.8.so.1.0 => /lib64/libpython3.8.so.1.0 (0x00007f5471187000) # As soon as we remove it: # rpm -e python-unversioned-command-3.8.5-5.fc32.noarch # hash -r # python bash: python: command not found... Install package 'python-unversioned-command' to provide command 'python'? [N/y] n # And rebuilding perf now doesn't find python in the system: make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j24' parallel build <SNIP> Makefile.config:786: No python interpreter was found: disables Python support - please install python-devel/python-dev <SNIP> After this patch: $ rpm -qi python-unversioned-command package python-unversioned-command is not installed $ $ python bash: python: command not found... Install package 'python-unversioned-command' to provide command 'python'? [N/y] ^C $ $ m make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j24' parallel build <SNIP> CC /tmp/build/perf/tests/attr.o CC /tmp/build/perf/tests/python-use.o DESCEND plugins GEN /tmp/build/perf/python/perf.so INSTALL trace_plugins LD /tmp/build/perf/tests/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> make: Leaving directory '/home/acme/git/perf/tools/perf' 19: 'import perf' in python : Ok $ ldd ~/bin/perf | grep python libpython3.8.so.1.0 => /lib64/libpython3.8.so.1.0 (0x00007f2c8c708000) $ ls -la /tmp/build/perf/python total 1864 drwxrwxr-x. 2 acme acme 60 Oct 13 16:20 . drwxrwxr-x. 18 acme acme 4420 Oct 13 16:31 .. -rwxrwxr-x. 1 acme acme 1907216 Oct 13 16:31 perf.cpython-38-x86_64-linux-gnu.so $ Signed-off-by: James Clark <james.clark@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> LPU-Reference: 20201005080645.6588-1-james.clark@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-10-05 11:06:45 +03:00
$(call get-executable-or-default,PYTHON_CONFIG,$(PYTHON_AUTO_CONFIG))
grep-libs = $(filter -l%,$(1))
strip-libs = $(filter-out -l%,$(1))
PYTHON_CONFIG_SQ := $(call shell-sq,$(PYTHON_CONFIG))
# Python 3.8 changed the output of `python-config --ldflags` to not include the
# '-lpythonX.Y' flag unless '--embed' is also passed. The feature check for
# libpython fails if that flag is not included in LDFLAGS
ifeq ($(shell $(PYTHON_CONFIG_SQ) --ldflags --embed 2>&1 1>/dev/null; echo $$?), 0)
PYTHON_CONFIG_LDFLAGS := --ldflags --embed
else
PYTHON_CONFIG_LDFLAGS := --ldflags
endif
ifdef PYTHON_CONFIG
PYTHON_EMBED_LDOPTS := $(shell $(PYTHON_CONFIG_SQ) $(PYTHON_CONFIG_LDFLAGS) 2>/dev/null)
PYTHON_EMBED_LDFLAGS := $(call strip-libs,$(PYTHON_EMBED_LDOPTS))
PYTHON_EMBED_LIBADD := $(call grep-libs,$(PYTHON_EMBED_LDOPTS)) -lutil
PYTHON_EMBED_CCOPTS := $(shell $(PYTHON_CONFIG_SQ) --includes 2>/dev/null)
FLAGS_PYTHON_EMBED := $(PYTHON_EMBED_CCOPTS) $(PYTHON_EMBED_LDOPTS)
endif
FEATURE_CHECK_CFLAGS-libpython := $(PYTHON_EMBED_CCOPTS)
FEATURE_CHECK_LDFLAGS-libpython := $(PYTHON_EMBED_LDOPTS)
FEATURE_CHECK_CFLAGS-libpython-version := $(PYTHON_EMBED_CCOPTS)
FEATURE_CHECK_LDFLAGS-libpython-version := $(PYTHON_EMBED_LDOPTS)
FEATURE_CHECK_LDFLAGS-libaio = -lrt
FEATURE_CHECK_LDFLAGS-disassembler-four-args = -lbfd -lopcodes -ldl
perf build: Check what binutils's 'disassembler()' signature to use Commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils repo, which changed the disassembler() function signature, so we must use the feature test introduced in fb982666e380 ("tools/bpftool: fix bpftool build with bintutils >= 2.9") to deal with that. Committer testing: After adding the missing function call to test-all.c, and: FEATURE_CHECK_LDFLAGS-disassembler-four-args = -bfd -lopcodes And the fallbacks for cases where we need -liberty and sometimes -lz to tools/perf/Makefile.config, we get: $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... disassembler-four-args: [ on ] CC /tmp/build/perf/jvmti/libjvmti.o CC /tmp/build/perf/builtin-bench.o <SNIP> $ $ The feature detection test-all.bin gets successfully built and linked: $ ls -la /tmp/build/perf/feature/test-all.bin -rwxrwxr-x. 1 acme acme 2680352 Mar 19 11:07 /tmp/build/perf/feature/test-all.bin $ nm /tmp/build/perf/feature/test-all.bin | grep -w disassembler 0000000000061f90 T disassembler $ Time to move on to the patches that make use of this disassembler() routine in binutils's libopcodes. Signed-off-by: Song Liu <songliubraving@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <guro@fb.com> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com [ split from a larger patch, added missing FEATURE_CHECK_LDFLAGS-disassembler-four-args ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-12 08:30:48 +03:00
CORE_CFLAGS += -fno-omit-frame-pointer
CORE_CFLAGS += -ggdb3
CORE_CFLAGS += -funwind-tables
CORE_CFLAGS += -Wall
CORE_CFLAGS += -Wextra
CORE_CFLAGS += -std=gnu99
CXXFLAGS += -std=gnu++14 -fno-exceptions -fno-rtti
CXXFLAGS += -Wall
CXXFLAGS += -fno-omit-frame-pointer
CXXFLAGS += -ggdb3
CXXFLAGS += -funwind-tables
CXXFLAGS += -Wno-strict-aliasing
# Enforce a non-executable stack, as we may regress (again) in the future by
# adding assembler files missing the .GNU-stack linker note.
LDFLAGS += -Wl,-z,noexecstack
EXTLIBS = -lpthread -lrt -lm -ldl
perf tools: Allow to build with -ltcmalloc By using "make TCMALLOC=1" you can enable perf to be build for usage with libtcmalloc.so (gperftools). Get heap profile (tools/perf directory): $ <install gperftools> $ make TCMALLOC=1 DEBUG=1 $ HEAPPROFILE=/tmp/heapprof ./perf ... $ pprof ./perf /tmp/heapprof.000* (pprof) top Total: 2335.5 MB 1735.1 74.3% 74.3% 1735.1 74.3% memdup 402.0 17.2% 91.5% 402.0 17.2% zalloc 140.2 6.0% 97.5% 145.8 6.2% map__new 33.6 1.4% 98.9% 33.6 1.4% symbol__new 12.4 0.5% 99.5% 12.4 0.5% alloc_event 6.2 0.3% 99.7% 6.2 0.3% nsinfo__new 5.5 0.2% 100.0% 5.5 0.2% nsinfo__copy 0.3 0.0% 100.0% 0.3 0.0% dso__new 0.1 0.0% 100.0% 0.1 0.0% do_read_string 0.0 0.0% 100.0% 0.0 0.0% __GI__IO_file_doallocate See callstack: $ pprof --pdf ./perf /tmp/heapprof.00* > callstack.pdf $ pprof --web ./perf /tmp/heapprof.00* Committer testing: Install gperftools, on fedora: # dnf install gperftools-devel Then build: $ make TCMALLOC=1 DEBUG=1 -C tools/perf O=/tmp/build/perf install-bin Verify that it linked against the right library: $ ldd ~/bin/perf | grep tcma libtcmalloc.so.4 => /lib64/libtcmalloc.so.4 (0x00007fb2953a7000) $ Run 'perf trace' system wide for 1 minute: # HEAPPROFILE=/tmp/heapprof perf trace -a sleep 1m <SNIP> 59985.524 ( 0.006 ms): Web Content/20354 recvmsg(fd: 9<socket:[1762817]>, msg: 0x7ffee5fdafb0) = -1 EAGAIN (Resource temporarily unavailable) 59985.536 ( 0.005 ms): Web Content/20354 recvmsg(fd: 9<socket:[1762817]>, msg: 0x7ffee5fdafc0) = -1 EAGAIN (Resource temporarily unavailable) 59981.956 (10.143 ms): SCTP timer/21716 ... [continued]: select()) = 0 (Timeout) 59985.549 ( ): Web Content/20354 poll(ufds: 0x7f1df38af180, nfds: 3, timeout_msecs: 4294967295) ... 0.926 (59999.481 ms): sleep/29764 ... [continued]: nanosleep()) = 0 59992.133 ( ): SCTP timer/21716 select(tvp: 0x7ff5bf7fee80) ... 60000.477 ( 0.009 ms): sleep/29764 close(fd: 1) = 0 60000.493 ( 0.005 ms): sleep/29764 close(fd: 2) = 0 60000.514 ( ): sleep/29764 exit_group() = ? Dumping heap profile to /tmp/heapprof.0001.heap (Exiting, 3 MB in use) [root@quaco ~]# Install pprof: # dnf install pprof And run it: # pprof ~/bin/perf /tmp/heapprof.0001.heap Using local file /root/bin/perf. Using local file /tmp/heapprof.0001.heap. Welcome to pprof! For help, type 'help'. (pprof) top Total: 4.0 MB 1.7 42.0% 42.0% 2.2 54.1% map__new 0.9 23.3% 65.3% 0.9 23.3% zalloc 0.5 11.4% 76.7% 0.5 11.4% dso__new 0.2 5.6% 82.3% 0.3 8.5% trace__sys_enter 0.2 4.9% 87.2% 0.2 4.9% __GI___strdup 0.2 3.8% 91.0% 0.2 3.8% new_term 0.1 2.2% 93.2% 0.4 10.1% __perf_pmu__new_alias 0.0 1.0% 94.3% 0.0 1.2% event_read_fields 0.0 0.8% 95.1% 0.0 0.8% nsinfo__new 0.0 0.7% 95.8% 0.1 3.2% trace__read_syscall_info (pprof) Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20191013151427.11941-2-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-10-13 18:14:25 +03:00
ifneq ($(TCMALLOC),)
CFLAGS += -fno-builtin-malloc -fno-builtin-calloc -fno-builtin-realloc -fno-builtin-free
EXTLIBS += -ltcmalloc
endif
ifeq ($(FEATURES_DUMP),)
# We will display at the end of this Makefile.config, using $(call feature_display_entries)
# As we may retry some feature detection here, see the disassembler-four-args case, for instance
FEATURE_DISPLAY_DEFERRED := 1
include $(srctree)/tools/build/Makefile.feature
else
include $(FEATURES_DUMP)
endif
ifeq ($(feature-stackprotector-all), 1)
CORE_CFLAGS += -fstack-protector-all
endif
ifeq ($(DEBUG),0)
ifeq ($(feature-fortify-source), 1)
CORE_CFLAGS += -D_FORTIFY_SOURCE=2
endif
endif
INC_FLAGS += -I$(srctree)/tools/lib/perf/include
INC_FLAGS += -I$(src-perf)/util/include
INC_FLAGS += -I$(src-perf)/arch/$(SRCARCH)/include
INC_FLAGS += -I$(srctree)/tools/include/
INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/uapi
INC_FLAGS += -I$(srctree)/tools/include/uapi
INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/include/
INC_FLAGS += -I$(srctree)/tools/arch/$(SRCARCH)/
# $(obj-perf) for generated common-cmds.h
# $(obj-perf)/util for generated bison/flex headers
ifneq ($(OUTPUT),)
INC_FLAGS += -I$(obj-perf)/util
INC_FLAGS += -I$(obj-perf)
endif
INC_FLAGS += -I$(src-perf)/util
INC_FLAGS += -I$(src-perf)
INC_FLAGS += -I$(srctree)/tools/lib/
CORE_CFLAGS += -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_GNU_SOURCE
CFLAGS += $(CORE_CFLAGS) $(INC_FLAGS)
CXXFLAGS += $(INC_FLAGS)
LIBPERF_CFLAGS := $(CORE_CFLAGS) $(EXTRA_CFLAGS)
ifeq ($(feature-pthread-attr-setaffinity-np), 1)
CFLAGS += -DHAVE_PTHREAD_ATTR_SETAFFINITY_NP
endif
ifeq ($(feature-pthread-barrier), 1)
CFLAGS += -DHAVE_PTHREAD_BARRIER
endif
ifndef NO_BIONIC
$(call feature_check,bionic)
ifeq ($(feature-bionic), 1)
BIONIC := 1
CFLAGS += -DLACKS_SIGQUEUE_PROTOTYPE
CFLAGS += -DLACKS_OPEN_MEMSTREAM_PROTOTYPE
EXTLIBS := $(filter-out -lrt,$(EXTLIBS))
EXTLIBS := $(filter-out -lpthread,$(EXTLIBS))
endif
endif
tools build feature: Check if eventfd() is available A new 'perf bench epoll' will use this, and to disable it for older systems, add a feature test for this API. This is just a simple program that if successfully compiled, means that the feature is present, at least at the library level, in a build that sets the output directory to /tmp/build/perf (using O=/tmp/build/perf), we end up with: $ ls -la /tmp/build/perf/feature/test-eventfd* -rwxrwxr-x. 1 acme acme 8176 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.bin -rw-rw-r--. 1 acme acme 588 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.d -rw-rw-r--. 1 acme acme 0 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.make.output $ ldd /tmp/build/perf/feature/test-eventfd.bin linux-vdso.so.1 (0x00007fff3bf3f000) libc.so.6 => /lib64/libc.so.6 (0x00007fa984061000) /lib64/ld-linux-x86-64.so.2 (0x00007fa984417000) $ grep eventfd -A 2 -B 2 /tmp/build/perf/FEATURE-DUMP feature-dwarf=1 feature-dwarf_getlocations=1 feature-eventfd=1 feature-fortify-source=1 feature-sync-compare-and-swap=1 $ The main thing here is that in the end we'll have -DHAVE_EVENTFD in CFLAGS, and then the 'perf bench' entry needing that API can be selectively pruned. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Ahern <dsahern@gmail.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-wkeldwob7dpx6jvtuzl8164k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-21 23:42:00 +03:00
ifeq ($(feature-eventfd), 1)
CFLAGS += -DHAVE_EVENTFD_SUPPORT
tools build feature: Check if eventfd() is available A new 'perf bench epoll' will use this, and to disable it for older systems, add a feature test for this API. This is just a simple program that if successfully compiled, means that the feature is present, at least at the library level, in a build that sets the output directory to /tmp/build/perf (using O=/tmp/build/perf), we end up with: $ ls -la /tmp/build/perf/feature/test-eventfd* -rwxrwxr-x. 1 acme acme 8176 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.bin -rw-rw-r--. 1 acme acme 588 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.d -rw-rw-r--. 1 acme acme 0 Nov 21 15:58 /tmp/build/perf/feature/test-eventfd.make.output $ ldd /tmp/build/perf/feature/test-eventfd.bin linux-vdso.so.1 (0x00007fff3bf3f000) libc.so.6 => /lib64/libc.so.6 (0x00007fa984061000) /lib64/ld-linux-x86-64.so.2 (0x00007fa984417000) $ grep eventfd -A 2 -B 2 /tmp/build/perf/FEATURE-DUMP feature-dwarf=1 feature-dwarf_getlocations=1 feature-eventfd=1 feature-fortify-source=1 feature-sync-compare-and-swap=1 $ The main thing here is that in the end we'll have -DHAVE_EVENTFD in CFLAGS, and then the 'perf bench' entry needing that API can be selectively pruned. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: David Ahern <dsahern@gmail.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Baron <jbaron@akamai.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-wkeldwob7dpx6jvtuzl8164k@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-21 23:42:00 +03:00
endif
ifeq ($(feature-get_current_dir_name), 1)
CFLAGS += -DHAVE_GET_CURRENT_DIR_NAME
endif
tools build: Check if gettid() is available before providing helper Laura reported that the perf build failed in fedora when we got a glibc that provides gettid(), which I reproduced using fedora rawhide with the glibc-devel-2.29.9000-26.fc31.x86_64 package. Add a feature check to avoid providing a gettid() helper in such systems. On a fedora rawhide system with this patch applied we now get: [root@7a5f55352234 perf]# grep gettid /tmp/build/perf/FEATURE-DUMP feature-gettid=1 [root@7a5f55352234 perf]# cat /tmp/build/perf/feature/test-gettid.make.output [root@7a5f55352234 perf]# ldd /tmp/build/perf/feature/test-gettid.bin linux-vdso.so.1 (0x00007ffc6b1f6000) libc.so.6 => /lib64/libc.so.6 (0x00007f04e0a74000) /lib64/ld-linux-x86-64.so.2 (0x00007f04e0c47000) [root@7a5f55352234 perf]# nm /tmp/build/perf/feature/test-gettid.bin | grep -w gettid U gettid@@GLIBC_2.30 [root@7a5f55352234 perf]# While on a fedora:29 system: [acme@quaco perf]$ grep gettid /tmp/build/perf/FEATURE-DUMP feature-gettid=0 [acme@quaco perf]$ cat /tmp/build/perf/feature/test-gettid.make.output test-gettid.c: In function ‘main’: test-gettid.c:8:9: error: implicit declaration of function ‘gettid’; did you mean ‘getgid’? [-Werror=implicit-function-declaration] return gettid(); ^~~~~~ getgid cc1: all warnings being treated as errors [acme@quaco perf]$ Reported-by: Laura Abbott <labbott@redhat.com> Tested-by: Laura Abbott <labbott@redhat.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Weimer <fweimer@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: https://lkml.kernel.org/n/tip-yfy3ch53agmklwu9o7rlgf9c@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-13 18:04:19 +03:00
ifeq ($(feature-gettid), 1)
CFLAGS += -DHAVE_GETTID
endif
perf tools: Add file-handle feature test The file handle (FHANDLE) support is configurable so some systems might not have it. So add a config feature item to check it on build time so that we don't add the cgroup tracking feature based on that. Committer notes: Had to make the test use the same construct as its later use in synthetic-events.c, in the next patch in this series. i.e. make it be: struct { struct file_handle fh; uint64_t cgroup_id; } handle; To cope with: CC /tmp/build/perf/util/cloexec.o util/synthetic-events.c:428:22: error: field 'fh' with CC /tmp/build/perf/util/call-path.o variable sized type 'struct file_handle' not at the end of a struct or class is a GNU extension [-Werror,-Wgnu-variable-sized-type-not-at-end] struct file_handle fh; ^ 1 error generated. Deal with this at some point, i.e. investigate if the right thing is to remove that -Wgnu-variable-sized-type-not-at-end from our CFLAGS, for now do the test the same way as it is used looks more sensible. Reported-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Namhyung Kim <namhyung@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200402015249.3800462-1-namhyung@kernel.org [ split from a larger patch, removed blank line at EOF ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-04-02 04:52:49 +03:00
ifeq ($(feature-file-handle), 1)
CFLAGS += -DHAVE_FILE_HANDLE
endif
ifdef NO_LIBELF
NO_DWARF := 1
NO_DEMANGLE := 1
NO_LIBUNWIND := 1
NO_LIBDW_DWARF_UNWIND := 1
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:12 +03:00
NO_LIBBPF := 1
NO_JVMTI := 1
else
ifeq ($(feature-libelf), 0)
ifeq ($(feature-glibc), 1)
LIBC_SUPPORT := 1
endif
ifeq ($(BIONIC),1)
LIBC_SUPPORT := 1
endif
ifeq ($(LIBC_SUPPORT),1)
msg := $(warning No libelf found. Disables 'probe' tool, jvmti and BPF support in 'perf record'. Please install libelf-dev, libelf-devel or elfutils-libelf-devel);
NO_LIBELF := 1
NO_DWARF := 1
NO_DEMANGLE := 1
NO_LIBUNWIND := 1
NO_LIBDW_DWARF_UNWIND := 1
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:12 +03:00
NO_LIBBPF := 1
NO_JVMTI := 1
else
perf build: Fix error message when asking for -fsanitize=address without required libraries When build perf with ASan or UBSan, if libasan or libubsan can not find, the feature-glibc is 0 and there exists the following error log which is wrong, because we can find gnu/libc-version.h in /usr/include, glibc-devel is also installed. [yangtiezhu@linux perf]$ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' BUILD: Doing 'make -j4' parallel build HOSTCC fixdep.o HOSTLD fixdep-in.o LINK fixdep <stdin>:1:0: warning: -fsanitize=address and -fsanitize=kernel-address are not supported for this target <stdin>:1:0: warning: -fsanitize=address not supported for this target Auto-detecting system features: ... dwarf: [ OFF ] ... dwarf_getlocations: [ OFF ] ... glibc: [ OFF ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libcap: [ OFF ] ... libelf: [ OFF ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ OFF ] ... zlib: [ OFF ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ OFF ] ... libaio: [ OFF ] ... libzstd: [ OFF ] ... disassembler-four-args: [ OFF ] Makefile.config:393: *** No gnu/libc-version.h found, please install glibc-dev[el]. Stop. Makefile.perf:224: recipe for target 'sub-make' failed make[1]: *** [sub-make] Error 2 Makefile:69: recipe for target 'all' failed make: *** [all] Error 2 [yangtiezhu@linux perf]$ ls /usr/include/gnu/libc-version.h /usr/include/gnu/libc-version.h After install libasan and libubsan, the feature-glibc is 1 and the build process is success, so the cause is related with libasan or libubsan, we should check them and print an error log to reflect the reality. Committer testing: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf $ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ OFF ] ... dwarf_getlocations: [ OFF ] ... glibc: [ OFF ] ... gtk2: [ OFF ] ... libbfd: [ OFF ] ... libcap: [ OFF ] ... libelf: [ OFF ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libcrypto: [ OFF ] ... libunwind: [ OFF ] ... libdw-dwarf-unwind: [ OFF ] ... zlib: [ OFF ] ... lzma: [ OFF ] ... get_cpuid: [ OFF ] ... bpf: [ OFF ] ... libaio: [ OFF ] ... libzstd: [ OFF ] ... disassembler-four-args: [ OFF ] Makefile.config:401: *** No libasan found, please install libasan. Stop. make[1]: *** [Makefile.perf:231: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 make: Leaving directory '/home/acme/git/perf/tools/perf' $ $ $ sudo dnf install libasan <SNIP> Installed: libasan-9.3.1-2.fc31.x86_64 $ $ $ make DEBUG=1 EXTRA_CFLAGS='-fno-omit-frame-pointer -fsanitize=address' O=/tmp/build/perf -C tools/perf/ install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libbfd: [ on ] ... libcap: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... libzstd: [ on ] ... disassembler-four-args: [ on ] <SNIP> CC /tmp/build/perf/util/pmu-flex.o FLEX /tmp/build/perf/util/expr-flex.c CC /tmp/build/perf/util/expr-bison.o CC /tmp/build/perf/util/expr.o CC /tmp/build/perf/util/expr-flex.o CC /tmp/build/perf/util/parse-events-flex.o CC /tmp/build/perf/util/parse-events.o LD /tmp/build/perf/util/intel-pt-decoder/perf-in.o LD /tmp/build/perf/util/perf-in.o LD /tmp/build/perf/perf-in.o LINK /tmp/build/perf/perf <SNIP> INSTALL python-scripts INSTALL perf_completion-script INSTALL perf-tip make: Leaving directory '/home/acme/git/perf/tools/perf' $ ldd ~/bin/perf | grep asan libasan.so.5 => /lib64/libasan.so.5 (0x00007f0904164000) $ And if we rebuild without -fsanitize-address: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf $ make O=/tmp/build/perf -C tools/perf/ install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j12' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libbfd: [ on ] ... libcap: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... libzstd: [ on ] ... disassembler-four-args: [ on ] GEN /tmp/build/perf/common-cmds.h CC /tmp/build/perf/exec-cmd.o <SNIP> INSTALL perf_completion-script INSTALL perf-tip make: Leaving directory '/home/acme/git/perf/tools/perf' $ ldd ~/bin/perf | grep asan $ Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn> Acked-by: Jiri Olsa <jolsa@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: tiezhu yang <yangtiezhu@loongson.cn> Cc: xuefeng li <lixuefeng@loongson.cn> Link: http://lore.kernel.org/lkml/1592445961-28044-1-git-send-email-yangtiezhu@loongson.cn Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-06-18 05:06:01 +03:00
ifneq ($(filter s% -fsanitize=address%,$(EXTRA_CFLAGS),),)
ifneq ($(shell ldconfig -p | grep libasan >/dev/null 2>&1; echo $$?), 0)
msg := $(error No libasan found, please install libasan);
endif
endif
ifneq ($(filter s% -fsanitize=undefined%,$(EXTRA_CFLAGS),),)
ifneq ($(shell ldconfig -p | grep libubsan >/dev/null 2>&1; echo $$?), 0)
msg := $(error No libubsan found, please install libubsan);
endif
endif
ifneq ($(filter s% -static%,$(LDFLAGS),),)
msg := $(error No static glibc found, please install glibc-static);
else
msg := $(error No gnu/libc-version.h found, please install glibc-dev[el]);
endif
endif
else
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 19:52:58 +04:00
ifndef NO_LIBDW_DWARF_UNWIND
ifneq ($(feature-libdw-dwarf-unwind),1)
NO_LIBDW_DWARF_UNWIND := 1
msg := $(warning No libdw DWARF unwind found, Please install elfutils-devel/libdw-dev >= 0.158 and/or set LIBDW_DIR);
endif
endif
ifneq ($(feature-dwarf), 1)
ifndef NO_DWARF
msg := $(warning No libdw.h found or old libdw.h found or elfutils is older than 0.138, disables dwarf support. Please install new elfutils-devel/libdw-dev);
NO_DWARF := 1
endif
else
ifneq ($(feature-dwarf_getlocations), 1)
msg := $(warning Old libdw.h, finding variables at given 'perf probe' point will not work, install elfutils-devel/libdw-dev >= 0.157);
else
CFLAGS += -DHAVE_DWARF_GETLOCATIONS_SUPPORT
endif # dwarf_getlocations
endif # Dwarf support
endif # libelf support
endif # NO_LIBELF
ifeq ($(feature-glibc), 1)
CFLAGS += -DHAVE_GLIBC_SUPPORT
endif
tools build feature: Check if libaio is available This will be used by 'perf record' to speed up reading the perf ring buffer. Committer testing: $ make -C tools/perf O=/tmp/build/perf make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ OFF ] ... libaudit: [ OFF ] ... libbfd: [ OFF ] ... libelf: [ on ] ... libnuma: [ OFF ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ OFF ] ... libpython: [ OFF ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] $ ls -la /tmp/build/perf/feature/test-libaio.* -rwxrwxr-x. 1 acme acme 18296 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.bin -rw-rw-r--. 1 acme acme 1165 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.d -rw-rw-r--. 1 acme acme 0 Nov 26 08:49 /tmp/build/perf/feature/test-libaio.make.output $ $ grep -i aio /tmp/build/perf/FEATURE-DUMP feature-libaio=1 $ Signed-off-by: Alexey Budankov <alexey.budankov@linux.intel.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Reviewed-by: Jiri Olsa <jolsa@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/5fcda10c-6c63-68df-383a-c6d9e5d1f918@linux.intel.com [ split from a larger patch ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-06 12:03:35 +03:00
ifeq ($(feature-libaio), 1)
ifndef NO_AIO
CFLAGS += -DHAVE_AIO_SUPPORT
endif
endif
ifdef NO_DWARF
NO_LIBDW_DWARF_UNWIND := 1
endif
ifeq ($(feature-sched_getcpu), 1)
CFLAGS += -DHAVE_SCHED_GETCPU_SUPPORT
endif
ifeq ($(feature-setns), 1)
CFLAGS += -DHAVE_SETNS_SUPPORT
$(call detected,CONFIG_SETNS)
endif
perf coresight: Do not test for libopencsd by default Since it is not yet that generally available, avoid testing for the presence of libcoresight in the fast path test-all.bin feature test. # dnf search opencsd No matches found. # dnf search OpenCSD No matches found. # cat /etc/fedora-release Fedora release 29 (Twenty Nine) # I.e. right now, in my system test-all.bin is failing all the time since Fedora29 doesn't have libopencsd available: $ cat /tmp/build/perf/feature/test-all.make.output In file included from test-all.c:174: test-libopencsd.c:2:10: fatal error: opencsd/c_api/opencsd_c_api.h: No such file or directory #include <opencsd/c_api/opencsd_c_api.h> ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ compilation terminated. See: 6ab2b762befd ("perf build: Disable libbabeltrace check by default") For the rationale, as soon as libopencsd becomes more generally packaged and available, we do the same thing we did with babeltrace, enabling it by default, as done in: 24787afbcd01 ("perf tools: Enable LIBBABELTRACE by default") For now, to explicitely ask for opencsd, make sure you have it installed and use: make -C tools/perf CORESIGHT=1 The feature test output will be there as an empty file: $ ls -la /tmp/build/perf/feature/test-libopencsd.make.output Because the binary used for the feature check was successfully built: $ ls -la /tmp/build/perf/feature/test-libopencsd.bin -rwxrwxr-x. 1 acme acme 18336 Feb 12 14:49 /tmp/build/perf/feature/test-libopencsd.bin $ ldd /tmp/build/perf/feature/test-libopencsd.bin linux-vdso.so.1 (0x00007fffe18cc000) libopencsd_c_api.so.0 => /lib64/libopencsd_c_api.so.0 (0x00007fb8e67f6000) libopencsd.so.0 => /lib64/libopencsd.so.0 (0x00007fb8e676f000) libc.so.6 => /lib64/libc.so.6 (0x00007fb8e65a9000) libstdc++.so.6 => /lib64/libstdc++.so.6 (0x00007fb8e6411000) libm.so.6 => /lib64/libm.so.6 (0x00007fb8e628d000) libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fb8e6272000) /lib64/ld-linux-x86-64.so.2 (0x00007fb8e6828000) $ And the resulting perf binary will be linked with it: -rw-rw-r--. 1 acme acme 0 Feb 12 14:49 /tmp/build/perf/feature/test-libopencsd.make.output $ ldd ~/bin/perf | grep opencsd libopencsd_c_api.so.0 => /lib64/libopencsd_c_api.so.0 (0x00007fd43097f000) libopencsd.so.0 => /lib64/libopencsd.so.0 (0x00007fd4308f8000) $ To make sure this gets built before pushing things upstream I have a ubuntu:19.04-x-arm64 container that has: [root@quaco x-arm64]# grep CORESIGHT Dockerfile ENV EXTRA_MAKE_ARGS=CORESIGHT=1 [root@quaco x-arm64]# So that I always build with libopencsd before pushing things upstream. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kim Phillips <kim.phillips@arm.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Link: https://lkml.kernel.org/n/tip-20vyy39jw9jgrijesi30fgox@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-12 20:37:15 +03:00
ifdef CORESIGHT
$(call feature_check,libopencsd)
ifeq ($(feature-libopencsd), 1)
CFLAGS += -DHAVE_CSTRACE_SUPPORT $(LIBOPENCSD_CFLAGS)
ifeq ($(feature-reallocarray), 0)
CFLAGS += -DCOMPAT_NEED_REALLOCARRAY
endif
LDFLAGS += $(LIBOPENCSD_LDFLAGS)
EXTLIBS += $(OPENCSDLIBS)
$(call detected,CONFIG_LIBOPENCSD)
ifdef CSTRACE_RAW
CFLAGS += -DCS_DEBUG_RAW
ifeq (${CSTRACE_RAW}, packed)
CFLAGS += -DCS_RAW_PACKED
endif
endif
perf build: Report failure for testing feature libopencsd When build perf tool with passing option 'CORESIGHT=1' explicitly, if the feature test fails for library libopencsd, the build doesn't complain the feature failure and continue to build the tool with disabling the CoreSight feature insteadly. This patch changes the building behaviour, when build perf tool with the option 'CORESIGHT=1' and detect the failure for testing feature libopencsd, the build process will be aborted and it shows the complaint info. Committer testing: First make sure there is no opencsd library installed: $ rpm -qa | grep -i csd $ sudo rm -rf `find /usr/local -name "*csd*"` $ find /usr/local -name "*csd*" $ Then cleanup the perf build output directory: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ; $ And try to build explicitely asking for coresight: $ make O=/tmp/build/perf CORESIGHT=1 O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j24' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Makefile.config:493: *** Error: No libopencsd library found or the version is not up-to-date. Please install recent libopencsd to build with CORESIGHT=1. Stop. make[1]: *** [Makefile.perf:238: sub-make] Error 2 make: *** [Makefile:113: install-bin] Error 2 make: Leaving directory '/var/home/acme/git/perf/tools/perf' $ Now install the opencsd library present in Fedora 34: $ sudo dnf install opencsd-devel <SNIP> Installed: opencsd-1.0.0-1.fc34.x86_64 opencsd-devel-1.0.0-1.fc34.x86_64 Complete! $ Try again building with coresight: $ make O=/tmp/build/perf CORESIGHT=1 O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/var/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j24' parallel build Makefile.config:493: *** Error: No libopencsd library found or the version is not up-to-date. Please install recent libopencsd to build with CORESIGHT=1. Stop. make[1]: *** [Makefile.perf:238: sub-make] Error 2 make: *** [Makefile:113: install-bin] Error 2 make: Leaving directory '/var/home/acme/git/perf/tools/perf' $ Since Fedora 34 is pretty recent, one assumes we need to get it from its upstream git repository, use rpm to find where that is: $ rpm -q --qf "%{URL}\n" opencsd https://github.com/Linaro/OpenCSD $ Go there, clone the repo, build it and install into /usr/local, then try again: $ cd ~acme/git/perf $ make O=/tmp/build/perf VF=1 CORESIGHT=1 O=/tmp/build/perf -C tools/perf install-bin | grep -i opencsd ... libopencsd: [ on ] PERF_VERSION = 5.14.g454719f67a3d $ export LD_LIBRARY_PATH=/usr/local/lib $ ldd ~/bin/perf | grep opencsd libopencsd_c_api.so.1 => /usr/local/lib/libopencsd_c_api.so.1 (0x00007f28f78a4000) libopencsd.so.1 => /usr/local/lib/libopencsd.so.1 (0x00007f28f6a2e000) $ Now it works. Requested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Leo Yan <leo.yan@linaro.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: James Clark <james.clark@arm.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Mike Leach <mike.leach@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> Cc: coresight@lists.linaro.org Link: http://lore.kernel.org/lkml/20210902081800.550016-1-leo.yan@linaro.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-09-02 11:18:00 +03:00
else
dummy := $(error Error: No libopencsd library found or the version is not up-to-date. Please install recent libopencsd to build with CORESIGHT=1)
endif
endif
ifndef NO_LIBELF
CFLAGS += -DHAVE_LIBELF_SUPPORT
EXTLIBS += -lelf
$(call detected,CONFIG_LIBELF)
ifeq ($(feature-libelf-getphdrnum), 1)
CFLAGS += -DHAVE_ELF_GETPHDRNUM_SUPPORT
endif
ifeq ($(feature-libelf-gelf_getnote), 1)
CFLAGS += -DHAVE_GELF_GETNOTE_SUPPORT
else
msg := $(warning gelf_getnote() not found on libelf, SDT support disabled);
endif
ifeq ($(feature-libelf-getshdrstrndx), 1)
CFLAGS += -DHAVE_ELF_GETSHDRSTRNDX_SUPPORT
endif
perf build-ids: Fall back to debuginfod query if debuginfo not found During a perf-record, use the -ldebuginfod API to query a debuginfod server, should the debug data not be found in the usual system locations. If successful, the usual $HOME/.debug dir is populated. Tested with: $ find . . ./ctags-debuginfo-5.8-26.fc31.x86_64.rpm ./usr ./usr/lib ./usr/lib/debug ./usr/lib/debug/.build-id ./usr/lib/debug/.build-id/ca ./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d ./usr/lib/debug/.build-id/ca/46f6ae6a0cee57d85abc1d461c49074248908d.debug ./usr/lib/debug/usr ./usr/lib/debug/usr/bin ./usr/lib/debug/usr/bin/ctags-5.8-26.fc31.x86_64.debug $ debuginfod -F . ... $ rm -rf ~/.debug/ ; mkdir ~/.debug $ perf record make tags BUILD: Doing 'make -j8' parallel build GEN tags [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.107 MB perf.data (1483 samples) ] $ find ~/.debug | grep ctags /home/jolsa/.debug/usr/bin/ctags /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes $ rm -rf ~/.debug/ ; mkdir ~/.debug $ DEBUGINFOD_URLS=http://localhost:8002 perf record make tags BUILD: Doing 'make -j8' parallel build GEN tags [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.108 MB perf.data (1531 samples) ] $ find ~/.debug | grep ctag /home/jolsa/.debug/usr/bin/ctags /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/debug /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/elf /home/jolsa/.debug/usr/bin/ctags/ca46f6ae6a0cee57d85abc1d461c49074248908d/probes Note the 'debug' file is created in the last run. Note that currently the debuginfo data are downloaded only on record path, we still need add this support to perf build-id/report.. and test ;-) Tested-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Jiri Olsa <jolsa@kernel.org> Signed-off-by: Frank Ch. Eigler <fche@redhat.com> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-08-13 11:22:04 +03:00
ifndef NO_LIBDEBUGINFOD
$(call feature_check,libdebuginfod)
ifeq ($(feature-libdebuginfod), 1)
CFLAGS += -DHAVE_DEBUGINFOD_SUPPORT
EXTLIBS += -ldebuginfod
endif
endif
ifndef NO_DWARF
ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
msg := $(warning DWARF register mappings have not been defined for architecture $(SRCARCH), DWARF support disabled);
NO_DWARF := 1
else
CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS)
LDFLAGS += $(LIBDW_LDFLAGS)
EXTLIBS += ${DWARFLIBS}
$(call detected,CONFIG_DWARF)
endif # PERF_HAVE_DWARF_REGS
endif # NO_DWARF
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:12 +03:00
ifndef NO_LIBBPF
ifeq ($(feature-bpf), 1)
CFLAGS += -DHAVE_LIBBPF_SUPPORT
$(call detected,CONFIG_LIBBPF)
perf tools: Allow to link with libbpf dynamicaly Currently we support only static linking with kernel's libbpf (tools/lib/bpf). This patch adds libbpf package detection and support to link perf with it dynamically. The libbpf package status is displayed with: $ make VF=1 Auto-detecting system features: ... ... libbpf: [ on ] It's not checked by default, because it's quite new. Once it's on most distros we can switch it on. For the same reason it's not added to the test-all check. Perf does not need advanced version of libbpf, so we can check just for the base bpf_object__open function. Adding new compile variable to detect libbpf package and link bpf dynamically: $ make LIBBPF_DYNAMIC=1 ... LINK perf $ ldd perf | grep bpf libbpf.so.0 => /lib64/libbpf.so.0 (0x00007f46818bc000) If libbpf is not installed, build stops with: Makefile.config:486: *** Error: No libbpf devel library found,\ please install libbpf-devel. Stop. Committer testing: $ make LIBBPF_DYNAMIC=1 -C tools/perf O=/tmp/build/perf make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Makefile.config:493: *** Error: No libbpf devel library found, please install libbpf-devel. Stop. make[1]: *** [Makefile.perf:225: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 make: Leaving directory '/home/acme/git/perf/tools/perf' $ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20191126121253.28253-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-26 15:12:53 +03:00
# detecting libbpf without LIBBPF_DYNAMIC, so make VF=1 shows libbpf detection status
$(call feature_check,libbpf)
ifdef LIBBPF_DYNAMIC
ifeq ($(feature-libbpf), 1)
EXTLIBS += -lbpf
$(call detected,CONFIG_LIBBPF_DYNAMIC)
perf tools: Allow to link with libbpf dynamicaly Currently we support only static linking with kernel's libbpf (tools/lib/bpf). This patch adds libbpf package detection and support to link perf with it dynamically. The libbpf package status is displayed with: $ make VF=1 Auto-detecting system features: ... ... libbpf: [ on ] It's not checked by default, because it's quite new. Once it's on most distros we can switch it on. For the same reason it's not added to the test-all check. Perf does not need advanced version of libbpf, so we can check just for the base bpf_object__open function. Adding new compile variable to detect libbpf package and link bpf dynamically: $ make LIBBPF_DYNAMIC=1 ... LINK perf $ ldd perf | grep bpf libbpf.so.0 => /lib64/libbpf.so.0 (0x00007f46818bc000) If libbpf is not installed, build stops with: Makefile.config:486: *** Error: No libbpf devel library found,\ please install libbpf-devel. Stop. Committer testing: $ make LIBBPF_DYNAMIC=1 -C tools/perf O=/tmp/build/perf make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Makefile.config:493: *** Error: No libbpf devel library found, please install libbpf-devel. Stop. make[1]: *** [Makefile.perf:225: sub-make] Error 2 make: *** [Makefile:70: all] Error 2 make: Leaving directory '/home/acme/git/perf/tools/perf' $ Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Toke Høiland-Jørgensen <toke@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jesper Dangaard Brouer <brouer@redhat.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Michael Petlan <mpetlan@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Song Liu <songliubraving@fb.com> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Link: http://lore.kernel.org/lkml/20191126121253.28253-1-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-11-26 15:12:53 +03:00
else
dummy := $(error Error: No libbpf devel library found, please install libbpf-devel);
endif
endif
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:12 +03:00
endif
ifndef NO_DWARF
ifdef PERF_HAVE_ARCH_REGS_QUERY_REGISTER_OFFSET
CFLAGS += -DHAVE_BPF_PROLOGUE
$(call detected,CONFIG_BPF_PROLOGUE)
else
msg := $(warning BPF prologue is not supported by architecture $(SRCARCH), missing regs_query_register_offset());
endif
else
msg := $(warning DWARF support is off, BPF prologue is disabled);
endif
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:12 +03:00
endif # NO_LIBBPF
endif # NO_LIBELF
ifndef NO_SDT
ifneq ($(feature-sdt), 1)
msg := $(warning No sys/sdt.h found, no SDT events are defined, please install systemtap-sdt-devel or systemtap-sdt-dev);
NO_SDT := 1;
else
CFLAGS += -DHAVE_SDT_EVENT
$(call detected,CONFIG_SDT_EVENT)
endif
endif
ifdef PERF_HAVE_JITDUMP
ifndef NO_LIBELF
$(call detected,CONFIG_JITDUMP)
CFLAGS += -DHAVE_JITDUMP
endif
endif
ifeq ($(SRCARCH),powerpc)
ifndef NO_DWARF
CFLAGS += -DHAVE_SKIP_CALLCHAIN_IDX
endif
endif
ifndef NO_LIBUNWIND
have_libunwind :=
perf unwind: Do not put libunwind-{x86,aarch64} in FEATURE_TESTS_BASIC As it is not normally available on x86_64 not being tested on test-all.c but being in FEATURE_TESTS_BASIC ends up implying that those features are present, which leads to trying to link with those libraries and a build failure now that test-all.c is finally again building successfully: /usr/bin/ld: cannot find -lunwind-x86 /usr/bin/ld: cannot find -lunwind-aarch64 collect2: error: ld returned 1 exit status make[3]: *** [Makefile:199: /tmp/build/perf/plugin_jbd2.so] Error 1 make[3]: *** Waiting for unfinished jobs.... /usr/bin/ld: cannot find -lunwind-x86 /usr/bin/ld: cannot find -lunwind-aarch64 So remove those features from there and explicitely test them. And then move this patch to just before the last one that allows this to be exposed, so that we keep the tree bisectable. With all this in place we get, at this point: $ ldd /tmp/build/perf/feature/test-libunwind.bin linux-vdso.so.1 (0x00007fffa09c6000) libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007fbcf4451000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007fbcf4435000) liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fbcf440c000) libelf.so.1 => /lib64/libelf.so.1 (0x00007fbcf43f2000) libc.so.6 => /lib64/libc.so.6 (0x00007fbcf422c000) libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fbcf4211000) /lib64/ld-linux-x86-64.so.2 (0x00007fbcf4491000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fbcf41ed000) libz.so.1 => /lib64/libz.so.1 (0x00007fbcf41d3000) $ cat /tmp/build/perf/feature/test-libunwind-x86.make.output test-libunwind-x86.c:2:10: fatal error: libunwind-x86.h: No such file or directory #include <libunwind-x86.h> ^~~~~~~~~~~~~~~~~ compilation terminated. $ cat /tmp/build/perf/feature/test-libunwind-aarch64.make.output test-libunwind-aarch64.c:2:10: fatal error: libunwind-aarch64.h: No such file or directory #include <libunwind-aarch64.h> ^~~~~~~~~~~~~~~~~~~~~ compilation terminated. $ $ ldd ~/bin/perf | grep unwind libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f5ceb24b000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f5ceb22f000) $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/n/tip-vs6kwqsvwk7oxhs6z9mq87pp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-12 22:34:32 +03:00
$(call feature_check,libunwind-x86)
ifeq ($(feature-libunwind-x86), 1)
$(call detected,CONFIG_LIBUNWIND_X86)
CFLAGS += -DHAVE_LIBUNWIND_X86_SUPPORT
LDFLAGS += -lunwind-x86
perf unwind: Fix compile error for static cross build Build failure for static cross-compiling on aarch64, with libunwind-x86 provided: $ file ./libunwind_for_x86_on_aarch64/lib/libunwind-x86.so.8.0.1 libunwind-x86.so.8.0.1: ELF 64-bit LSB shared object, ARM aarch64, version 1 (SYSV), dynamically linked, not stripped $ make LDFLAGS=-static LIBUNWIND_DIR=./libunwind_for_x86_on_aarch64 ARCH=aarch64 CROSS_COMPILE=aarch64-buildroot-linux-gnu- ~/libperf.a(libperf-in.o): In function `find_proc_info': :(.text+0xae4ac): undefined reference to `_Ux86_dwarf_search_unwind_table' ~/libperf.a(libperf-in.o): In function `_unwind__prepare_access': :(.text+0xaedd0): undefined reference to `_Ux86_create_addr_space' :(.text+0xaee24): undefined reference to `_Ux86_set_caching_policy' ~/libperf.a(libperf-in.o): In function `_unwind__flush_access': :(.text+0xaee98): undefined reference to `_Ux86_flush_cache' ~/libperf.a(libperf-in.o): In function `_unwind__finish_access': :(.text+0xaef08): undefined reference to `_Ux86_destroy_addr_space' ~/libperf.a(libperf-in.o): In function `get_entries': :(.text+0xaf148): undefined reference to `_Ux86_init_remote' :(.text+0xaf184): undefined reference to `_Ux86_get_reg' :(.text+0xaf1a4): undefined reference to `_Ux86_step' collect2: error: ld returned 1 exit status Makefile.perf:350: recipe for target '~/perf' failed make[1]: *** [~/perf] Error 1 Makefile:68: recipe for target 'all' failed make: *** [all] Error 2 This is because the remote libunwind library detected is not appended to EXTLIBS variable, which will be included between 'start-group' and 'end-group' when linking. The existing variable LIBUNWIND_LIBS is assigned to libs for local unwind, this patch introduces a new variable EXTLIBS_LIBUNWIND for storing remote libunwind libraries instead. Signed-off-by: He Kuang <hekuang@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1465988636-81502-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 14:03:56 +03:00
EXTLIBS_LIBUNWIND += -lunwind-x86
have_libunwind = 1
endif
perf unwind: Do not put libunwind-{x86,aarch64} in FEATURE_TESTS_BASIC As it is not normally available on x86_64 not being tested on test-all.c but being in FEATURE_TESTS_BASIC ends up implying that those features are present, which leads to trying to link with those libraries and a build failure now that test-all.c is finally again building successfully: /usr/bin/ld: cannot find -lunwind-x86 /usr/bin/ld: cannot find -lunwind-aarch64 collect2: error: ld returned 1 exit status make[3]: *** [Makefile:199: /tmp/build/perf/plugin_jbd2.so] Error 1 make[3]: *** Waiting for unfinished jobs.... /usr/bin/ld: cannot find -lunwind-x86 /usr/bin/ld: cannot find -lunwind-aarch64 So remove those features from there and explicitely test them. And then move this patch to just before the last one that allows this to be exposed, so that we keep the tree bisectable. With all this in place we get, at this point: $ ldd /tmp/build/perf/feature/test-libunwind.bin linux-vdso.so.1 (0x00007fffa09c6000) libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007fbcf4451000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007fbcf4435000) liblzma.so.5 => /lib64/liblzma.so.5 (0x00007fbcf440c000) libelf.so.1 => /lib64/libelf.so.1 (0x00007fbcf43f2000) libc.so.6 => /lib64/libc.so.6 (0x00007fbcf422c000) libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007fbcf4211000) /lib64/ld-linux-x86-64.so.2 (0x00007fbcf4491000) libpthread.so.0 => /lib64/libpthread.so.0 (0x00007fbcf41ed000) libz.so.1 => /lib64/libz.so.1 (0x00007fbcf41d3000) $ cat /tmp/build/perf/feature/test-libunwind-x86.make.output test-libunwind-x86.c:2:10: fatal error: libunwind-x86.h: No such file or directory #include <libunwind-x86.h> ^~~~~~~~~~~~~~~~~ compilation terminated. $ cat /tmp/build/perf/feature/test-libunwind-aarch64.make.output test-libunwind-aarch64.c:2:10: fatal error: libunwind-aarch64.h: No such file or directory #include <libunwind-aarch64.h> ^~~~~~~~~~~~~~~~~~~~~ compilation terminated. $ $ ldd ~/bin/perf | grep unwind libunwind-x86_64.so.8 => /lib64/libunwind-x86_64.so.8 (0x00007f5ceb24b000) libunwind.so.8 => /lib64/libunwind.so.8 (0x00007f5ceb22f000) $ Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Cc: Will Deacon <will.deacon@arm.com> Link: https://lkml.kernel.org/n/tip-vs6kwqsvwk7oxhs6z9mq87pp@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-02-12 22:34:32 +03:00
$(call feature_check,libunwind-aarch64)
ifeq ($(feature-libunwind-aarch64), 1)
$(call detected,CONFIG_LIBUNWIND_AARCH64)
CFLAGS += -DHAVE_LIBUNWIND_AARCH64_SUPPORT
LDFLAGS += -lunwind-aarch64
perf unwind: Fix compile error for static cross build Build failure for static cross-compiling on aarch64, with libunwind-x86 provided: $ file ./libunwind_for_x86_on_aarch64/lib/libunwind-x86.so.8.0.1 libunwind-x86.so.8.0.1: ELF 64-bit LSB shared object, ARM aarch64, version 1 (SYSV), dynamically linked, not stripped $ make LDFLAGS=-static LIBUNWIND_DIR=./libunwind_for_x86_on_aarch64 ARCH=aarch64 CROSS_COMPILE=aarch64-buildroot-linux-gnu- ~/libperf.a(libperf-in.o): In function `find_proc_info': :(.text+0xae4ac): undefined reference to `_Ux86_dwarf_search_unwind_table' ~/libperf.a(libperf-in.o): In function `_unwind__prepare_access': :(.text+0xaedd0): undefined reference to `_Ux86_create_addr_space' :(.text+0xaee24): undefined reference to `_Ux86_set_caching_policy' ~/libperf.a(libperf-in.o): In function `_unwind__flush_access': :(.text+0xaee98): undefined reference to `_Ux86_flush_cache' ~/libperf.a(libperf-in.o): In function `_unwind__finish_access': :(.text+0xaef08): undefined reference to `_Ux86_destroy_addr_space' ~/libperf.a(libperf-in.o): In function `get_entries': :(.text+0xaf148): undefined reference to `_Ux86_init_remote' :(.text+0xaf184): undefined reference to `_Ux86_get_reg' :(.text+0xaf1a4): undefined reference to `_Ux86_step' collect2: error: ld returned 1 exit status Makefile.perf:350: recipe for target '~/perf' failed make[1]: *** [~/perf] Error 1 Makefile:68: recipe for target 'all' failed make: *** [all] Error 2 This is because the remote libunwind library detected is not appended to EXTLIBS variable, which will be included between 'start-group' and 'end-group' when linking. The existing variable LIBUNWIND_LIBS is assigned to libs for local unwind, this patch introduces a new variable EXTLIBS_LIBUNWIND for storing remote libunwind libraries instead. Signed-off-by: He Kuang <hekuang@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1465988636-81502-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 14:03:56 +03:00
EXTLIBS_LIBUNWIND += -lunwind-aarch64
have_libunwind = 1
$(call feature_check,libunwind-debug-frame-aarch64)
ifneq ($(feature-libunwind-debug-frame-aarch64), 1)
msg := $(warning No debug_frame support found in libunwind-aarch64);
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME_AARCH64
endif
endif
ifneq ($(feature-libunwind), 1)
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 19:52:58 +04:00
msg := $(warning No libunwind found. Please install libunwind-dev[el] >= 1.1 and/or set LIBUNWIND_DIR);
NO_LOCAL_LIBUNWIND := 1
else
have_libunwind := 1
$(call detected,CONFIG_LOCAL_LIBUNWIND)
endif
ifneq ($(have_libunwind), 1)
NO_LIBUNWIND := 1
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 19:52:58 +04:00
endif
else
NO_LOCAL_LIBUNWIND := 1
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 19:52:58 +04:00
endif
perf tools: Make perf depend on libbpf By adding libbpf into perf's Makefile, this patch enables perf to build libbpf if libelf is found and neither NO_LIBELF nor NO_LIBBPF is set. The newly introduced code is similar to how libapi and libtraceevent are wired into Makefile.perf. MANIFEST is also updated for 'make perf-*-src-pkg'. Append make_no_libbpf to tools/perf/tests/make. The 'bpf' feature check is appended into default FEATURE_TESTS and FEATURE_DISPLAY, so perf will check the API version of bpf in /path/to/kernel/include/uapi/linux/bpf.h. Which should not fail except when we are trying to port this code to an old kernel. Error messages are also updated to notify users about the lack of BPF support in 'perf record' if libelf is missing or the BPF API check failed. tools/lib/bpf is added to TAG_FOLDERS to allow us to navigate libbpf files when working on perf using tools/perf/tags. Signed-off-by: Wang Nan <wangnan0@huawei.com> Acked-by: Alexei Starovoitov <ast@plumgrid.com> Cc: Brendan Gregg <brendan.d.gregg@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: David Ahern <dsahern@gmail.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Kaixu Xia <xiakaixu@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/1444826502-49291-2-git-send-email-wangnan0@huawei.com [ Document NO_LIBBPF in Makefile.perf, noted by Jiri Olsa ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-10-14 15:41:12 +03:00
ifndef NO_LIBBPF
ifneq ($(feature-bpf), 1)
msg := $(warning BPF API too old. Please install recent kernel headers. BPF support in 'perf record' is disabled.)
NO_LIBBPF := 1
endif
endif
ifdef BUILD_BPF_SKEL
$(call feature_check,clang-bpf-co-re)
ifeq ($(feature-clang-bpf-co-re), 0)
dummy := $(error Error: clang too old/not installed. Please install recent clang to build with BUILD_BPF_SKEL)
endif
$(call detected,CONFIG_PERF_BPF_SKEL)
CFLAGS += -DHAVE_BPF_SKEL
endif
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 19:52:58 +04:00
dwarf-post-unwind := 1
dwarf-post-unwind-text := BUG
# setup DWARF post unwinder
ifdef NO_LIBUNWIND
ifdef NO_LIBDW_DWARF_UNWIND
msg := $(warning Disabling post unwind, no support found.);
dwarf-post-unwind := 0
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
2013-11-14 03:51:29 +04:00
else
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 19:52:58 +04:00
dwarf-post-unwind-text := libdw
$(call detected,CONFIG_LIBDW_DWARF_UNWIND)
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 19:52:58 +04:00
endif
else
dwarf-post-unwind-text := libunwind
$(call detected,CONFIG_LIBUNWIND)
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 19:52:58 +04:00
# Enable libunwind support by default.
ifndef NO_LIBDW_DWARF_UNWIND
NO_LIBDW_DWARF_UNWIND := 1
endif
endif
ifeq ($(dwarf-post-unwind),1)
CFLAGS += -DHAVE_DWARF_UNWIND_SUPPORT
$(call detected,CONFIG_DWARF_UNWIND)
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 19:52:58 +04:00
else
NO_DWARF_UNWIND := 1
endif
ifndef NO_LOCAL_LIBUNWIND
ifeq ($(SRCARCH),$(filter $(SRCARCH),arm arm64))
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 19:52:58 +04:00
$(call feature_check,libunwind-debug-frame)
ifneq ($(feature-libunwind-debug-frame), 1)
msg := $(warning No debug_frame support found in libunwind);
Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-arm Pull ARM updates from Russell King: "Included in this series are: 1. BE8 (modern big endian) changes for ARM from Ben Dooks 2. big.Little support from Nicolas Pitre and Dave Martin 3. support for LPAE systems with all system memory above 4GB 4. Perf updates from Will Deacon 5. Additional prefetching and other performance improvements from Will. 6. Neon-optimised AES implementation fro Ard. 7. A number of smaller fixes scattered around the place. There is a rather horrid merge conflict in tools/perf - I was never notified of the conflict because it originally occurred between Will's tree and other stuff. Consequently I have a resolution which Will forwarded me, which I'll forward on immediately after sending this mail. The other notable thing is I'm expecting some build breakage in the crypto stuff on ARM only with Ard's AES patches. These were merged into a stable git branch which others had already pulled, so there's little I can do about this. The problem is caused because these patches have a dependency on some code in the crypto git tree - I tried requesting a branch I can pull to resolve these, and all I got each time from the crypto people was "we'll revert our patches then" which would only make things worse since I still don't have the dependent patches. I've no idea what's going on there or how to resolve that, and since I can't split these patches from the rest of this pull request, I'm rather stuck with pushing this as-is or reverting Ard's patches. Since it should "come out in the wash" I've left them in - the only build problems they seem to cause at the moment are with randconfigs, and since it's a new feature anyway. However, if by -rc1 the dependencies aren't in, I think it'd be best to revert Ard's patches" I resolved the perf conflict roughly as per the patch sent by Russell, but there may be some differences. Any errors are likely mine. Let's see how the crypto issues work out.. * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (110 commits) ARM: 7868/1: arm/arm64: remove atomic_clear_mask() in "include/asm/atomic.h" ARM: 7867/1: include: asm: use 'int' instead of 'unsigned long' for 'oldval' in atomic_cmpxchg(). ARM: 7866/1: include: asm: use 'long long' instead of 'u64' within atomic.h ARM: 7871/1: amba: Extend number of IRQS ARM: 7887/1: Don't smp_cross_call() on UP devices in arch_irq_work_raise() ARM: 7872/1: Support arch_irq_work_raise() via self IPIs ARM: 7880/1: Clear the IT state independent of the Thumb-2 mode ARM: 7878/1: nommu: Implement dummy early_paging_init() ARM: 7876/1: clear Thumb-2 IT state on exception handling ARM: 7874/2: bL_switcher: Remove cpu_hotplug_driver_{lock,unlock}() ARM: footbridge: fix build warnings for netwinder ARM: 7873/1: vfp: clear vfp_current_hw_state for dying cpu ARM: fix misplaced arch_virt_to_idmap() ARM: 7848/1: mcpm: Implement cpu_kill() to synchronise on powerdown ARM: 7847/1: mcpm: Factor out logical-to-physical CPU translation ARM: 7869/1: remove unused XSCALE_PMU Kconfig param ARM: 7864/1: Handle 64-bit memory in case of 32-bit phys_addr_t ARM: 7863/1: Let arm_add_memory() always use 64-bit arguments ARM: 7862/1: pcpu: replace __get_cpu_var_uses ARM: 7861/1: cacheflush: consolidate single-CPU ARMv7 cache disabling code ...
2013-11-14 03:51:29 +04:00
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
endif
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 19:52:58 +04:00
else
# non-ARM has no dwarf_find_debug_frame() function:
CFLAGS += -DNO_LIBUNWIND_DEBUG_FRAME
endif
EXTLIBS += $(LIBUNWIND_LIBS)
LDFLAGS += $(LIBUNWIND_LIBS)
endif
ifeq ($(findstring -static,${LDFLAGS}),-static)
# gcc -static links libgcc_eh which contans piece of libunwind
LIBUNWIND_LDFLAGS += -Wl,--allow-multiple-definition
endif
ifndef NO_LIBUNWIND
CFLAGS += -DHAVE_LIBUNWIND_SUPPORT
perf tools: Setup default dwarf post unwinder Factor NO_LIBDW_DWARF_UNWIND makefile variable and code that selects default DWARf post unwinder based on detected features (libdw and libunwind support) If both are detected the libunwind is selected as default. Simple 'make' will try to add: - libunwind unwinder if present - libdw unwinder if present - disable dwarf unwind if non of libunwind and libdw libraries are present If one of the DWARF unwind libraries is detected, message is displayed which one (libunwind/libdw) is compiled in. Examples: - compile in libdw unwinder if present: $ make NO_LIBUNWIND=1 - compile in libdw (with libdw installation directory) unwinder if present: $ make LIBDW_DIR=/opt/elfutils/ NO_LIBUNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libdw - disable post dwarf unwind completely: $ make NO_LIBUNWIND=1 NO_LIBDW_DWARF_UNWIND=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... DWARF post unwind library: libunwind Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-6-git-send-email-jolsa@redhat.com [ Add suggestion about setting LIBDW_DIR when not finding libdw ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 19:52:58 +04:00
CFLAGS += $(LIBUNWIND_CFLAGS)
LDFLAGS += $(LIBUNWIND_LDFLAGS)
perf unwind: Fix compile error for static cross build Build failure for static cross-compiling on aarch64, with libunwind-x86 provided: $ file ./libunwind_for_x86_on_aarch64/lib/libunwind-x86.so.8.0.1 libunwind-x86.so.8.0.1: ELF 64-bit LSB shared object, ARM aarch64, version 1 (SYSV), dynamically linked, not stripped $ make LDFLAGS=-static LIBUNWIND_DIR=./libunwind_for_x86_on_aarch64 ARCH=aarch64 CROSS_COMPILE=aarch64-buildroot-linux-gnu- ~/libperf.a(libperf-in.o): In function `find_proc_info': :(.text+0xae4ac): undefined reference to `_Ux86_dwarf_search_unwind_table' ~/libperf.a(libperf-in.o): In function `_unwind__prepare_access': :(.text+0xaedd0): undefined reference to `_Ux86_create_addr_space' :(.text+0xaee24): undefined reference to `_Ux86_set_caching_policy' ~/libperf.a(libperf-in.o): In function `_unwind__flush_access': :(.text+0xaee98): undefined reference to `_Ux86_flush_cache' ~/libperf.a(libperf-in.o): In function `_unwind__finish_access': :(.text+0xaef08): undefined reference to `_Ux86_destroy_addr_space' ~/libperf.a(libperf-in.o): In function `get_entries': :(.text+0xaf148): undefined reference to `_Ux86_init_remote' :(.text+0xaf184): undefined reference to `_Ux86_get_reg' :(.text+0xaf1a4): undefined reference to `_Ux86_step' collect2: error: ld returned 1 exit status Makefile.perf:350: recipe for target '~/perf' failed make[1]: *** [~/perf] Error 1 Makefile:68: recipe for target 'all' failed make: *** [all] Error 2 This is because the remote libunwind library detected is not appended to EXTLIBS variable, which will be included between 'start-group' and 'end-group' when linking. The existing variable LIBUNWIND_LIBS is assigned to libs for local unwind, this patch introduces a new variable EXTLIBS_LIBUNWIND for storing remote libunwind libraries instead. Signed-off-by: He Kuang <hekuang@huawei.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1465988636-81502-1-git-send-email-hekuang@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-06-15 14:03:56 +03:00
EXTLIBS += $(EXTLIBS_LIBUNWIND)
endif
ifeq ($(NO_SYSCALL_TABLE),0)
$(call detected,CONFIG_TRACE)
else
ifndef NO_LIBAUDIT
perf build: Remove libaudit from the default feature checks Ingo reported that the libaudit was always appearing as OFF: Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ OFF ] And everything seemed to work, i.e. we were checking for a feature that we don't use, causing confusion for people building perf, so work to remove that nuisance while making sure that it works when an arch doesn't provide the alternative method to generate the syscall id/name conversion tables. Longer explanation of the new modus operandi: $ make -C tools/perf O=/tmp/build/perf NO_SYSCALL_TABLE=1 <SNIP> Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libbfd: [ on ] ... libcap: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... libzstd: [ on ] ... disassembler-four-args: [ on ] Makefile.config:665: No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev GEN /tmp/build/perf/common-cmds.h MKDIR /tmp/build/perf/fd/ MKDIR /tmp/build/perf/fs/ <SNIP> $ The libaudit test is forced and it fails when audit-libs-devel isn't available: $ cat /tmp/build/perf/feature/test-libaudit.make.output test-libaudit.c:2:10: fatal error: libaudit.h: No such file or directory 2 | #include <libaudit.h> | ^~~~~~~~~~~~ compilation terminated. $ If we install audit-libs-devel and rebuild it continues not to be shown as OFF in the main auto-detection summary, but again gets tested and this time: $ rpm -q audit-libs-devel audit-libs-devel-3.0-0.15.20191104git1c2f876.fc31.x86_64 $ The make output for the feature detection comes clean: $ cat /tmp/build/perf/feature/test-libaudit.make.output And the feature detection binary is successfully built and is dynamicly linked with libaudit: $ ldd /tmp/build/perf/feature/test-libaudit.bin | grep audit libaudit.so.1 => /lib64/libaudit.so.1 (0x00007f5bf5177000) $ As well as the resulting perf binary: $ ldd /tmp/build/perf/perf | grep audit libaudit.so.1 => /lib64/libaudit.so.1 (0x00007fad511c7000) $ And 'perf trace' works using the libaudit method: $ sudo /tmp/build/perf/perf trace -e nanosleep sleep 1 0.000 (1000.067 ms): sleep/281872 nanosleep(rqtp: 0x7ffedbbe69d0) = 0 $ If we leave audit-libs-devel installed but don't disable the use of the best method, the one using SYSCALL_TABLE, the default for architectures that provide the script to build the syscall id/name mapping using the .tbl files copied from the kernel sources, we get: $ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf $ make -C tools/perf O=/tmp/build/perf Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libbfd: [ on ] ... libcap: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... libzstd: [ on ] ... disassembler-four-args: [ on ] GEN /tmp/build/perf/common-cmds.h <SNIP> $ Again, no mention of libaudit being on or OFF and: $ cat /tmp/build/perf/feature/test-libaudit.make.output cat: /tmp/build/perf/feature/test-libaudit.make.output: No such file or directory $ We didn't even bother checking for its availability, slightly speeding up the build process and: $ ldd /tmp/build/perf/perf | grep libaudit $ We don't link with it, also: $ sudo /tmp/build/perf/perf trace -e nanosleep sleep 1 0.000 (1000.053 ms): sleep/299125 nanosleep(rqtp: 0x7ffc24611b50) = 0 $ And globs become available: $ sudo /tmp/build/perf/perf trace -e *sleep sleep 1 0.000 (1000.072 ms): sleep/299136 nanosleep(rqtp: 0x7ffe7a3c4ff0) = 0 $ Reported-by: Ingo Molnar <mingo@kernel.org> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-29 17:11:59 +03:00
$(call feature_check,libaudit)
ifneq ($(feature-libaudit), 1)
msg := $(warning No libaudit.h found, disables 'trace' tool, please install audit-libs-devel or libaudit-dev);
NO_LIBAUDIT := 1
else
CFLAGS += -DHAVE_LIBAUDIT_SUPPORT
EXTLIBS += -laudit
$(call detected,CONFIG_TRACE)
endif
endif
endif
ifndef NO_LIBCRYPTO
ifneq ($(feature-libcrypto), 1)
msg := $(warning No libcrypto.h found, disables jitted code injection, please install openssl-devel or libssl-dev);
NO_LIBCRYPTO := 1
else
CFLAGS += -DHAVE_LIBCRYPTO_SUPPORT
EXTLIBS += -lcrypto
$(call detected,CONFIG_CRYPTO)
endif
endif
ifdef NO_NEWT
NO_SLANG=1
endif
ifndef NO_SLANG
ifneq ($(feature-libslang), 1)
perf build: Handle slang being in /usr/include and in /usr/include/slang/ In some distros slang.h may be in a /usr/include 'slang' subdir, so use the if slang is not explicitely disabled (by using NO_SLANG=1) and its feature test for the common case (having /usr/include/slang.h) failed, use the results for the test that checks if it is in slang/slang.h. Change the only file in perf that includes slang.h to use HAVE_SLANG_INCLUDE_SUBDIR and forget about this for good. On a rhel6 system now we have: $ /tmp/build/perf/perf -vv | grep slang libslang: [ on ] # HAVE_SLANG_SUPPORT $ ldd /tmp/build/perf/perf | grep libslang libslang.so.2 => /usr/lib64/libslang.so.2 (0x00007fa2d5a8d000) $ grep slang /tmp/build/perf/FEATURE-DUMP feature-libslang=0 feature-libslang-include-subdir=1 $ cat /etc/redhat-release CentOS release 6.10 (Final) $ While on fedora:29: $ /tmp/build/perf/perf -vv | grep slang libslang: [ on ] # HAVE_SLANG_SUPPORT $ ldd /tmp/build/perf/perf | grep slang libslang.so.2 => /lib64/libslang.so.2 (0x00007f8eb11a7000) $ grep slang /tmp/build/perf/FEATURE-DUMP feature-libslang=1 feature-libslang-include-subdir=1 $ $ cat /etc/fedora-release Fedora release 29 (Twenty Nine) $ The feature-libslang-include-subdir=1 line is because the 'gettid()' test was added to test-all.c as the new glibc has an implementation for that, so we soon should have it not failing, i.e. should be the common case soon. Perhaps I should move it out till it becomes the norm... Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Fixes: 1955c8cf5e26 ("perf tools: Don't hardcode host include path for libslang") Link: https://lkml.kernel.org/n/tip-bkgtpsu3uit821fuwsdhj9gd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-06-18 23:48:12 +03:00
ifneq ($(feature-libslang-include-subdir), 1)
msg := $(warning slang not found, disables TUI support. Please install slang-devel, libslang-dev or libslang2-dev);
NO_SLANG := 1
else
CFLAGS += -DHAVE_SLANG_INCLUDE_SUBDIR
endif
endif
ifndef NO_SLANG
# Fedora has /usr/include/slang/slang.h, but ubuntu /usr/include/slang.h
CFLAGS += -DHAVE_SLANG_SUPPORT
EXTLIBS += -lslang
$(call detected,CONFIG_SLANG)
endif
endif
ifdef GTK2
FLAGS_GTK2=$(CFLAGS) $(LDFLAGS) $(EXTLIBS) $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null)
$(call feature_check,gtk2)
ifneq ($(feature-gtk2), 1)
msg := $(warning GTK2 not found, disables GTK2 support. Please install gtk2-devel or libgtk2.0-dev);
NO_GTK2 := 1
else
$(call feature_check,gtk2-infobar)
ifeq ($(feature-gtk2-infobar), 1)
GTK_CFLAGS := -DHAVE_GTK_INFO_BAR_SUPPORT
endif
CFLAGS += -DHAVE_GTK2_SUPPORT
GTK_CFLAGS += $(shell $(PKG_CONFIG) --cflags gtk+-2.0 2>/dev/null)
GTK_LIBS := $(shell $(PKG_CONFIG) --libs gtk+-2.0 2>/dev/null)
EXTLIBS += -ldl
endif
endif
ifdef NO_LIBPERL
CFLAGS += -DNO_LIBPERL
else
PERL_EMBED_LDOPTS = $(shell perl -MExtUtils::Embed -e ldopts 2>/dev/null)
PERL_EMBED_LDFLAGS = $(call strip-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_LIBADD = $(call grep-libs,$(PERL_EMBED_LDOPTS))
PERL_EMBED_CCOPTS = $(shell perl -MExtUtils::Embed -e ccopts 2>/dev/null)
PERL_EMBED_CCOPTS := $(filter-out -specs=%,$(PERL_EMBED_CCOPTS))
PERL_EMBED_CCOPTS := $(filter-out -flto=auto -ffat-lto-objects, $(PERL_EMBED_CCOPTS))
PERL_EMBED_LDOPTS := $(filter-out -specs=%,$(PERL_EMBED_LDOPTS))
FLAGS_PERL_EMBED=$(PERL_EMBED_CCOPTS) $(PERL_EMBED_LDOPTS)
ifneq ($(feature-libperl), 1)
CFLAGS += -DNO_LIBPERL
NO_LIBPERL := 1
msg := $(warning Missing perl devel files. Disabling perl scripting support, please install perl-ExtUtils-Embed/libperl-dev);
else
LDFLAGS += $(PERL_EMBED_LDFLAGS)
EXTLIBS += $(PERL_EMBED_LIBADD)
CFLAGS += -DHAVE_LIBPERL_SUPPORT
$(call detected,CONFIG_LIBPERL)
endif
endif
ifeq ($(feature-timerfd), 1)
CFLAGS += -DHAVE_TIMERFD_SUPPORT
else
msg := $(warning No timerfd support. Disables 'perf kvm stat live');
endif
disable-python = $(eval $(disable-python_code))
define disable-python_code
CFLAGS += -DNO_LIBPYTHON
$(warning $1)
NO_LIBPYTHON := 1
endef
ifdef NO_LIBPYTHON
$(call disable-python,Python support disabled by user)
else
ifndef PYTHON
$(call disable-python,No python interpreter was found: disables Python support - please install python-devel/python-dev)
else
PYTHON_WORD := $(call shell-wordify,$(PYTHON))
ifndef PYTHON_CONFIG
$(call disable-python,No 'python-config' tool was found: disables Python support - please install python-devel/python-dev)
else
ifneq ($(feature-libpython), 1)
$(call disable-python,No 'Python.h' (for Python 2.x support) was found: disables Python support - please install python-devel/python-dev)
else
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 23:56:41 +03:00
LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
EXTLIBS += $(PYTHON_EMBED_LIBADD)
LANG_BINDINGS += $(obj-perf)python/perf.so
CFLAGS += -DHAVE_LIBPYTHON_SUPPORT
perf tools: Add Python 3 support Added Python 3 support while keeping Python 2.7 compatibility. Committer notes: This doesn't make it to auto detect python 3, one has to explicitely ask it to build with python 3 devel files, here are the instructions provided by Jaroslav: --- $ cp -a tools/perf tools/python3-perf $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 all $ make V=1 prefix=/usr -C tools/python3-perf PYTHON=/usr/bin/python3 DESTDIR=%{buildroot} install-python_ext $ make V=1 prefix=/usr -C tools/perf PYTHON=/usr/bin/python2 DESTDIR=%{buildroot} install-python_ext --- We need to make this automatic, just like the existing tests for checking if the python2 devel files are in place, allowing the build with python3 if available, fallbacking to python2 and then just disabling it if none are available. So, using the PYTHON variable to build it using O= we get: Before this patch: $ rpm -q python3 python3-devel python3-3.6.4-7.fc27.x86_64 python3-devel-3.6.4-7.fc27.x86_64 $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make O=/tmp/build/perf PYTHON=/usr/bin/python3 -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' <SNIP> Makefile.config:670: Python 3 is not yet supported; please set Makefile.config:671: PYTHON and/or PYTHON_CONFIG appropriately. Makefile.config:672: If you also have Python 2 installed, then Makefile.config:673: try something like: Makefile.config:674: Makefile.config:675: make PYTHON=python2 Makefile.config:676: Makefile.config:677: Otherwise, disable Python support entirely: Makefile.config:678: Makefile.config:679: make NO_LIBPYTHON=1 Makefile.config:680: Makefile.config:681: *** . Stop. make[1]: *** [Makefile.perf:212: sub-make] Error 2 make: *** [Makefile:110: install-bin] Error 2 make: Leaving directory '/home/acme/git/linux/tools/perf' $ After: $ make O=/tmp/build/perf PYTHON=python3 -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython3.6m.so.1.0 => /lib64/libpython3.6m.so.1.0 (0x00007f58a31e8000) $ rpm -qf /lib64/libpython3.6m.so.1.0 python3-libs-3.6.4-7.fc27.x86_64 $ Now verify that when using the binding the right ELF file is loaded, using perf trace: $ perf trace -e open* perf test python 0.051 ( 0.016 ms): perf/3927 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 18: 'import perf' in python : 8.849 ( 0.013 ms): sh/3929 openat(dfd: CWD, filename: /etc/ld.so.cache, flags: CLOEXEC ) = 3 <SNIP> 25.572 ( 0.008 ms): python3/3931 openat(dfd: CWD, filename: /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so, flags: CLOEXEC) = 3 <SNIP> Ok <SNIP> $ And using tools/perf/python/twatch.py, to show PERF_RECORD_ metaevents: $ python3 tools/perf/python/twatch.py cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5207, ppid: 16060, tid: 5207, ptid: 16060, time: 10798513015459} cpu: 3, pid: 16060, tid: 16060 { type: fork, pid: 5208, ppid: 16060, tid: 5208, ptid: 16060, time: 10798513562503} cpu: 0, pid: 5208, tid: 5208 { type: comm, pid: 5208, tid: 5208, comm: grep } cpu: 2, pid: 5207, tid: 5207 { type: comm, pid: 5207, tid: 5207, comm: ps } cpu: 2, pid: 5207, tid: 5207 { type: exit, pid: 5207, ppid: 5207, tid: 5207, ptid: 5207, time: 10798551337484} cpu: 3, pid: 5208, tid: 5208 { type: exit, pid: 5208, ppid: 5208, tid: 5208, ptid: 5208, time: 10798551292153} cpu: 3, pid: 601, tid: 601 { type: fork, pid: 5209, ppid: 601, tid: 5209, ptid: 601, time: 10801779977324} ^CTraceback (most recent call last): File "tools/perf/python/twatch.py", line 68, in <module> main() File "tools/perf/python/twatch.py", line 40, in main evlist.poll(timeout = -1) KeyboardInterrupt $ # ps ax|grep twatch 5197 pts/8 S+ 0:00 python3 tools/perf/python/twatch.py # ls -la /proc/5197/smaps -r--r--r--. 1 acme acme 0 Feb 19 13:14 /proc/5197/smaps # grep python /proc/5197/smaps 558111307000-558111309000 r-xp 00000000 fd:00 3151710 /usr/bin/python3.6 558111508000-558111509000 r--p 00001000 fd:00 3151710 /usr/bin/python3.6 558111509000-55811150a000 rw-p 00002000 fd:00 3151710 /usr/bin/python3.6 7ffad6fc1000-7ffad7008000 r-xp 00000000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7008000-7ffad7207000 ---p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7207000-7ffad7208000 r--p 00046000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffad7208000-7ffad7215000 rw-p 00047000 00:2d 220196 /tmp/build/perf/python/perf.cpython-36m-x86_64-linux-gnu.so 7ffadea77000-7ffaded3d000 r-xp 00000000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffaded3d000-7ffadef3c000 ---p 002c6000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef3c000-7ffadef42000 r--p 002c5000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 7ffadef42000-7ffadefa5000 rw-p 002cb000 fd:00 3151795 /usr/lib64/libpython3.6m.so.1.0 # And with this patch, but building normally, without specifying the PYTHON=python3 part, which will make it use python2 if its devel files are available, like in this test: $ make O=/tmp/build/perf -C tools/perf install-bin $ ldd ~/bin/perf | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007f6a44410000) $ ldd /tmp/build/perf/python_ext_build/lib/perf.so | grep python libpython2.7.so.1.0 => /lib64/libpython2.7.so.1.0 (0x00007fed28a2c000) $ [acme@jouet perf]$ tools/perf/python/twatch.py cpu: 0, pid: 2817, tid: 2817 { type: fork, pid: 2817, ppid: 2817, tid: 8910, ptid: 2817, time: 11126454335306} cpu: 0, pid: 2817, tid: 2817 { type: comm, pid: 2817, tid: 8910, comm: worker } $ ps ax | grep twatch.py 8909 pts/8 S+ 0:00 /usr/bin/python tools/perf/python/twatch.py $ grep python /proc/8909/smaps 5579de658000-5579de659000 r-xp 00000000 fd:00 3156044 /usr/bin/python2.7 5579de858000-5579de859000 r--p 00000000 fd:00 3156044 /usr/bin/python2.7 5579de859000-5579de85a000 rw-p 00001000 fd:00 3156044 /usr/bin/python2.7 7f0de01f7000-7f0de023e000 r-xp 00000000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de023e000-7f0de043d000 ---p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043d000-7f0de043e000 r--p 00046000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de043e000-7f0de044b000 rw-p 00047000 00:2d 230695 /tmp/build/perf/python/perf.so 7f0de6f0f000-7f0de6f13000 r-xp 00000000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de6f13000-7f0de7113000 ---p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7113000-7f0de7114000 r--p 00004000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7114000-7f0de7115000 rw-p 00005000 fd:00 134975 /usr/lib64/python2.7/lib-dynload/_localemodule.so 7f0de7e73000-7f0de8052000 r-xp 00000000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8052000-7f0de8251000 ---p 001df000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8251000-7f0de8255000 r--p 001de000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 7f0de8255000-7f0de8291000 rw-p 001e2000 fd:00 3173292 /usr/lib64/libpython2.7.so.1.0 $ Signed-off-by: Jaroslav Škarvada <jskarvad@redhat.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> LPU-Reference: 20180119205641.24242-1-jskarvad@redhat.com Link: https://lkml.kernel.org/n/tip-8d7dt9kqp83vsz25hagug8fu@git.kernel.org [ Removed explicit check for python version, allowing it to really build with python3 ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-01-19 23:56:41 +03:00
$(call detected,CONFIG_LIBPYTHON)
endif
endif
endif
endif
ifndef NO_LIBBFD
ifeq ($(feature-libbfd), 1)
EXTLIBS += -lbfd -lopcodes
else
# we are on a system that requires -liberty and (maybe) -lz
# to link against -lbfd; test each case individually here
# call all detections now so we get correct
# status in VF output
$(call feature_check,libbfd-liberty)
$(call feature_check,libbfd-liberty-z)
ifeq ($(feature-libbfd-liberty), 1)
EXTLIBS += -lbfd -lopcodes -liberty
FEATURE_CHECK_LDFLAGS-disassembler-four-args += -liberty -ldl
else
ifeq ($(feature-libbfd-liberty-z), 1)
EXTLIBS += -lbfd -lopcodes -liberty -lz
FEATURE_CHECK_LDFLAGS-disassembler-four-args += -liberty -lz -ldl
endif
endif
$(call feature_check,disassembler-four-args)
endif
ifeq ($(feature-libbfd-buildid), 1)
CFLAGS += -DHAVE_LIBBFD_BUILDID_SUPPORT
else
msg := $(warning Old version of libbfd/binutils things like PE executable profiling will not be available);
endif
endif
ifdef NO_DEMANGLE
CFLAGS += -DNO_DEMANGLE
else
ifdef HAVE_CPLUS_DEMANGLE_SUPPORT
EXTLIBS += -liberty
else
perf build: Don't unconditionally link the libbfd feature test to -liberty and -lz Current libbfd feature test unconditionally links against -liberty and -lz. While it's required on some systems (e.g. opensuse), it's completely unnecessary on the others, where only -lbdf is sufficient (debian). This patch streamlines (and renames) the following feature checks: feature-libbfd - only link against -lbfd (debian), see commit 2cf9040714f3 ("perf tools: Fix bfd dependency libraries detection") feature-libbfd-liberty - link against -lbfd and -liberty feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse), see commit 280e7c48c3b8 ("perf tools: fix BFD detection on opensuse") (feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z} for clarity) The main motivation is to fix this feature test for bpftool which is currently broken on debian (libbfd feature shows OFF, but we still unconditionally link against -lbfd and it works). Tested on debian with only -lbfd installed (without -liberty); I'd appreciate if somebody on the other systems can test this new detection method. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-16 03:32:01 +03:00
ifeq ($(filter -liberty,$(EXTLIBS)),)
$(call feature_check,cplus-demangle)
# we dont have neither HAVE_CPLUS_DEMANGLE_SUPPORT
# or any of 'bfd iberty z' trinity
ifeq ($(feature-cplus-demangle), 1)
EXTLIBS += -liberty
else
msg := $(warning No bfd.h/libbfd found, please install binutils-dev[el]/zlib-static/libiberty-dev to gain symbol demangling)
CFLAGS += -DNO_DEMANGLE
endif
endif
endif
perf build: Don't unconditionally link the libbfd feature test to -liberty and -lz Current libbfd feature test unconditionally links against -liberty and -lz. While it's required on some systems (e.g. opensuse), it's completely unnecessary on the others, where only -lbdf is sufficient (debian). This patch streamlines (and renames) the following feature checks: feature-libbfd - only link against -lbfd (debian), see commit 2cf9040714f3 ("perf tools: Fix bfd dependency libraries detection") feature-libbfd-liberty - link against -lbfd and -liberty feature-libbfd-liberty-z - link against -lbfd, -liberty and -lz (opensuse), see commit 280e7c48c3b8 ("perf tools: fix BFD detection on opensuse") (feature-liberty{,-z} were renamed to feature-libbfd-liberty{,z} for clarity) The main motivation is to fix this feature test for bpftool which is currently broken on debian (libbfd feature shows OFF, but we still unconditionally link against -lbfd and it works). Tested on debian with only -lbfd installed (without -liberty); I'd appreciate if somebody on the other systems can test this new detection method. Signed-off-by: Stanislav Fomichev <sdf@google.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/4dfc634cfcfb236883971b5107cf3c28ec8a31be.1542328222.git.sdf@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-11-16 03:32:01 +03:00
ifneq ($(filter -liberty,$(EXTLIBS)),)
CFLAGS += -DHAVE_CPLUS_DEMANGLE_SUPPORT
endif
endif
ifneq ($(filter -lbfd,$(EXTLIBS)),)
CFLAGS += -DHAVE_LIBBFD_SUPPORT
endif
perf tools: Add gzip decompression support for kernel module Now my Archlinux box shows module symbols correctly. Before: $ perf report --stdio Failed to open /tmp/perf-3477.map, continuing without symbols no symbols found in /usr/bin/date, maybe install a debug package? No kallsyms or vmlinux with build-id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 was found [drm] with build id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 not found, continuing without symbols No kallsyms or vmlinux with build-id edd931629094b660ca9dec09a1b635c8d87aa2ee was found [jbd2] with build id edd931629094b660ca9dec09a1b635c8d87aa2ee not found, continuing without symbols No kallsyms or vmlinux with build-id a7b1eada671c34933e5610bb920b2ca4945a82c3 was found [ext4] with build id a7b1eada671c34933e5610bb920b2ca4945a82c3 not found, continuing without symbols No kallsyms or vmlinux with build-id d69511fa3e5840e770336ef45b06c83fef8d74e3 was found [scsi_mod] with build id d69511fa3e5840e770336ef45b06c83fef8d74e3 not found, continuing without symbols No kallsyms or vmlinux with build-id af0430af13461af058770ee9b87afc07922c2e77 was found [libata] with build id af0430af13461af058770ee9b87afc07922c2e77 not found, continuing without symbols No kallsyms or vmlinux with build-id aaeedff8160ce631a5f0333591c6ff291201d29f was found [libahci] with build id aaeedff8160ce631a5f0333591c6ff291201d29f not found, continuing without symbols No kallsyms or vmlinux with build-id c57907712becaf662dc4981824bb372c0441d605 was found [mac80211] with build id c57907712becaf662dc4981824bb372c0441d605 not found, continuing without symbols No kallsyms or vmlinux with build-id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f was found [iwldvm] with build id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f not found, continuing without symbols No kallsyms or vmlinux with build-id 2d86086bf136bf374a2f029cf85a48194f9b950b was found [cfg80211] with build id 2d86086bf136bf374a2f029cf85a48194f9b950b not found, continuing without symbols No kallsyms or vmlinux with build-id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 was found [iwlwifi] with build id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 not found, continuing without symbols ... # # Overhead Command Shared Object Symbol # ........ ............... ....................... ........................................................ # 0.03% swapper [ext4] [k] 0x000000000000fe2e 0.03% swapper [kernel.kallsyms] [k] account_entity_enqueue 0.03% swapper [ext4] [k] 0x000000000000fc2b 0.03% irq/50-iwlwifi [iwlwifi] [k] 0x000000000000200b 0.03% swapper [kernel.kallsyms] [k] ktime_add_safe 0.03% swapper [kernel.kallsyms] [k] elv_completed_request 0.03% swapper [libata] [k] 0x0000000000003997 0.03% swapper [libahci] [k] 0x0000000000001f25 0.03% swapper [kernel.kallsyms] [k] rb_next 0.03% swapper [kernel.kallsyms] [k] blk_finish_request 0.03% swapper [ext4] [k] 0x0000000000010248 0.00% perf [kernel.kallsyms] [k] native_write_msr_safe After: $ perf report --stdio Failed to open /tmp/perf-3477.map, continuing without symbols no symbols found in /usr/bin/tr, maybe install a debug package? ... # # Overhead Command Shared Object Symbol # ........ ............... ........................... ...................................................... # 0.04% kworker/u16:3 [ext4] [k] ext4_read_block_bitmap 0.03% kworker/u16:0 [mac80211] [k] ieee80211_sta_reset_beacon_monitor 0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_get_bssid 0.02% firefox [e1000e] [k] __ew32_prepare 0.02% swapper [libahci] [k] ahci_handle_port_interrupt 0.02% emacs libglib-2.0.so.0.4000.0 [.] g_mutex_unlock 0.02% swapper [e1000e] [k] e1000_clean_tx_irq 0.02% dwm [kernel.kallsyms] [k] __schedule 0.02% gnome-terminal- [vdso] [.] __vdso_clock_gettime 0.02% swapper [e1000e] [k] e1000_alloc_rx_buffers 0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_rx 0.01% firefox [vdso] [.] __vdso_gettimeofday 0.01% irq/50-iwlwifi [iwlwifi] [k] iwl_pcie_rxq_restock.part.13 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/87h9yexshi.fsf@sejong.aot.lge.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-31 10:51:38 +03:00
ifndef NO_ZLIB
ifeq ($(feature-zlib), 1)
CFLAGS += -DHAVE_ZLIB_SUPPORT
EXTLIBS += -lz
$(call detected,CONFIG_ZLIB)
perf tools: Add gzip decompression support for kernel module Now my Archlinux box shows module symbols correctly. Before: $ perf report --stdio Failed to open /tmp/perf-3477.map, continuing without symbols no symbols found in /usr/bin/date, maybe install a debug package? No kallsyms or vmlinux with build-id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 was found [drm] with build id 7b4ea0a49ae2111925857099aaf05c3246ff33e0 not found, continuing without symbols No kallsyms or vmlinux with build-id edd931629094b660ca9dec09a1b635c8d87aa2ee was found [jbd2] with build id edd931629094b660ca9dec09a1b635c8d87aa2ee not found, continuing without symbols No kallsyms or vmlinux with build-id a7b1eada671c34933e5610bb920b2ca4945a82c3 was found [ext4] with build id a7b1eada671c34933e5610bb920b2ca4945a82c3 not found, continuing without symbols No kallsyms or vmlinux with build-id d69511fa3e5840e770336ef45b06c83fef8d74e3 was found [scsi_mod] with build id d69511fa3e5840e770336ef45b06c83fef8d74e3 not found, continuing without symbols No kallsyms or vmlinux with build-id af0430af13461af058770ee9b87afc07922c2e77 was found [libata] with build id af0430af13461af058770ee9b87afc07922c2e77 not found, continuing without symbols No kallsyms or vmlinux with build-id aaeedff8160ce631a5f0333591c6ff291201d29f was found [libahci] with build id aaeedff8160ce631a5f0333591c6ff291201d29f not found, continuing without symbols No kallsyms or vmlinux with build-id c57907712becaf662dc4981824bb372c0441d605 was found [mac80211] with build id c57907712becaf662dc4981824bb372c0441d605 not found, continuing without symbols No kallsyms or vmlinux with build-id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f was found [iwldvm] with build id e0589077cc0ec8c3e4c40eb9f2d9e69d236bee8f not found, continuing without symbols No kallsyms or vmlinux with build-id 2d86086bf136bf374a2f029cf85a48194f9b950b was found [cfg80211] with build id 2d86086bf136bf374a2f029cf85a48194f9b950b not found, continuing without symbols No kallsyms or vmlinux with build-id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 was found [iwlwifi] with build id 4493c48599bdb3d91d0f8db5150e0be33fdd9221 not found, continuing without symbols ... # # Overhead Command Shared Object Symbol # ........ ............... ....................... ........................................................ # 0.03% swapper [ext4] [k] 0x000000000000fe2e 0.03% swapper [kernel.kallsyms] [k] account_entity_enqueue 0.03% swapper [ext4] [k] 0x000000000000fc2b 0.03% irq/50-iwlwifi [iwlwifi] [k] 0x000000000000200b 0.03% swapper [kernel.kallsyms] [k] ktime_add_safe 0.03% swapper [kernel.kallsyms] [k] elv_completed_request 0.03% swapper [libata] [k] 0x0000000000003997 0.03% swapper [libahci] [k] 0x0000000000001f25 0.03% swapper [kernel.kallsyms] [k] rb_next 0.03% swapper [kernel.kallsyms] [k] blk_finish_request 0.03% swapper [ext4] [k] 0x0000000000010248 0.00% perf [kernel.kallsyms] [k] native_write_msr_safe After: $ perf report --stdio Failed to open /tmp/perf-3477.map, continuing without symbols no symbols found in /usr/bin/tr, maybe install a debug package? ... # # Overhead Command Shared Object Symbol # ........ ............... ........................... ...................................................... # 0.04% kworker/u16:3 [ext4] [k] ext4_read_block_bitmap 0.03% kworker/u16:0 [mac80211] [k] ieee80211_sta_reset_beacon_monitor 0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_get_bssid 0.02% firefox [e1000e] [k] __ew32_prepare 0.02% swapper [libahci] [k] ahci_handle_port_interrupt 0.02% emacs libglib-2.0.so.0.4000.0 [.] g_mutex_unlock 0.02% swapper [e1000e] [k] e1000_clean_tx_irq 0.02% dwm [kernel.kallsyms] [k] __schedule 0.02% gnome-terminal- [vdso] [.] __vdso_clock_gettime 0.02% swapper [e1000e] [k] e1000_alloc_rx_buffers 0.02% irq/50-iwlwifi [mac80211] [k] ieee80211_rx 0.01% firefox [vdso] [.] __vdso_gettimeofday 0.01% irq/50-iwlwifi [iwlwifi] [k] iwl_pcie_rxq_restock.part.13 Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/r/87h9yexshi.fsf@sejong.aot.lge.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-10-31 10:51:38 +03:00
else
NO_ZLIB := 1
endif
endif
ifndef NO_LZMA
ifeq ($(feature-lzma), 1)
CFLAGS += -DHAVE_LZMA_SUPPORT
EXTLIBS += -llzma
$(call detected,CONFIG_LZMA)
else
msg := $(warning No liblzma found, disables xz kernel module decompression, please install xz-devel/liblzma-dev);
NO_LZMA := 1
endif
endif
ifndef NO_LIBZSTD
ifeq ($(feature-libzstd), 1)
CFLAGS += -DHAVE_ZSTD_SUPPORT
CFLAGS += $(LIBZSTD_CFLAGS)
LDFLAGS += $(LIBZSTD_LDFLAGS)
EXTLIBS += -lzstd
$(call detected,CONFIG_ZSTD)
else
msg := $(warning No libzstd found, disables trace compression, please install libzstd-dev[el] and/or set LIBZSTD_DIR);
NO_LIBZSTD := 1
endif
endif
tools build: Add capability-related feature detection Add utilities to help checking capabilities of the running procss. Make perf link with libcap, if it is available. If no libcap-dev[el], assume no capabilities. Committer testing: $ make O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: <SNIP> ... libbfd: [ on ] ... libcap: [ OFF ] ... libelf: [ on ] <SNIP> Makefile.config:833: No libcap found, disables capability support, please install libcap-devel/libcap-dev <SNIP> $ grep libcap /tmp/build/perf/FEATURE-DUMP feature-libcap=0 $ cat /tmp/build/perf/feature/test-libcap.make.output test-libcap.c:2:10: fatal error: sys/capability.h: No such file or directory 2 | #include <sys/capability.h> | ^~~~~~~~~~~~~~~~~~ compilation terminated. $ Now install libcap-devel and try again: $ make O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Warning: Kernel ABI header at 'tools/include/linux/bits.h' differs from latest version at 'include/linux/bits.h' diff -u tools/include/linux/bits.h include/linux/bits.h Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h Auto-detecting system features: <SNIP> ... libbfd: [ on ] ... libcap: [ on ] ... libelf: [ on ] <SNIP>> CC /tmp/build/perf/jvmti/libjvmti.o <SNIP>> $ grep libcap /tmp/build/perf/FEATURE-DUMP feature-libcap=1 $ cat /tmp/build/perf/feature/test-libcap.make.output $ ldd /tmp/build/perf/feature/test-libcap.make.bin ldd: /tmp/build/perf/feature/test-libcap.make.bin: No such file or directory $ ldd /tmp/build/perf/feature/test-libcap.bin linux-vdso.so.1 (0x00007ffc35bfe000) libcap.so.2 => /lib64/libcap.so.2 (0x00007ff9c62ff000) libc.so.6 => /lib64/libc.so.6 (0x00007ff9c6139000) /lib64/ld-linux-x86-64.so.2 (0x00007ff9c6326000) $ Signed-off-by: Igor Lubashev <ilubashe@akamai.com> Acked-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: James Morris <jmorris@namei.org> Cc: Mathieu Poirier <mathieu.poirier@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Suzuki Poulouse <suzuki.poulose@arm.com> [ split from a larger patch ] Link: http://lkml.kernel.org/r/8a1e76cf5c7c9796d0d4d240fbaa85305298aafa.1565188228.git.ilubashe@akamai.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-08-07 17:44:14 +03:00
ifndef NO_LIBCAP
ifeq ($(feature-libcap), 1)
CFLAGS += -DHAVE_LIBCAP_SUPPORT
EXTLIBS += -lcap
$(call detected,CONFIG_LIBCAP)
else
msg := $(warning No libcap found, disables capability support, please install libcap-devel/libcap-dev);
NO_LIBCAP := 1
endif
endif
ifndef NO_BACKTRACE
ifeq ($(feature-backtrace), 1)
CFLAGS += -DHAVE_BACKTRACE_SUPPORT
endif
endif
ifndef NO_LIBNUMA
ifeq ($(feature-libnuma), 0)
msg := $(warning No numa.h found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev);
NO_LIBNUMA := 1
else
tools build: Add test for presence of numa_num_possible_cpus() in libnuma The existing numa test checks only if numa.h and numa_available() are present, but that can be satisfied with an old libnuma that is not enough for the 'perf bench numa' entry, so add a test to check for that: [acme@rhel5 linux]$ make NO_AUXTRACE=1 NO_LIBPERL=1 -C tools/perf O=/tmp/build/perf install-bin make: Entering directory `/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j2' parallel build Auto-detecting system features: ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ OFF ] ... libperl: [ on ] <SNIP> config/Makefile:577: Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8 INSTALL binaries <SNIP> This fixes the build on old systems such as RHEL/CentOS 5.11. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: "Naveen N. Rao" <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Stephane Eranian <eranian@google.com> Cc: Victor Kamensky <victor.kamensky@linaro.org> Cc: Vinson Lee <vlee@twopensource.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-zqriqkezppi2de2iyjin1tnc@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-09-17 18:20:28 +03:00
ifeq ($(feature-numa_num_possible_cpus), 0)
msg := $(warning Old numa library found, disables 'perf bench numa mem' benchmark, please install numactl-devel/libnuma-devel/libnuma-dev >= 2.0.8);
NO_LIBNUMA := 1
else
CFLAGS += -DHAVE_LIBNUMA_SUPPORT
EXTLIBS += -lnuma
$(call detected,CONFIG_NUMA)
endif
endif
endif
ifdef HAVE_KVM_STAT_SUPPORT
CFLAGS += -DHAVE_KVM_STAT_SUPPORT
endif
perf build: Check what binutils's 'disassembler()' signature to use Commit 003ca0fd2286 ("Refactor disassembler selection") in the binutils repo, which changed the disassembler() function signature, so we must use the feature test introduced in fb982666e380 ("tools/bpftool: fix bpftool build with bintutils >= 2.9") to deal with that. Committer testing: After adding the missing function call to test-all.c, and: FEATURE_CHECK_LDFLAGS-disassembler-four-args = -bfd -lopcodes And the fallbacks for cases where we need -liberty and sometimes -lz to tools/perf/Makefile.config, we get: $ make -C tools/perf O=/tmp/build/perf install-bin make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j8' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] ... libaio: [ on ] ... disassembler-four-args: [ on ] CC /tmp/build/perf/jvmti/libjvmti.o CC /tmp/build/perf/builtin-bench.o <SNIP> $ $ The feature detection test-all.bin gets successfully built and linked: $ ls -la /tmp/build/perf/feature/test-all.bin -rwxrwxr-x. 1 acme acme 2680352 Mar 19 11:07 /tmp/build/perf/feature/test-all.bin $ nm /tmp/build/perf/feature/test-all.bin | grep -w disassembler 0000000000061f90 T disassembler $ Time to move on to the patches that make use of this disassembler() routine in binutils's libopcodes. Signed-off-by: Song Liu <songliubraving@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Jakub Kicinski <jakub.kicinski@netronome.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Roman Gushchin <guro@fb.com> Cc: Stanislav Fomichev <sdf@google.com> Link: http://lkml.kernel.org/r/20190312053051.2690567-13-songliubraving@fb.com [ split from a larger patch, added missing FEATURE_CHECK_LDFLAGS-disassembler-four-args ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2019-03-12 08:30:48 +03:00
ifeq ($(feature-disassembler-four-args), 1)
CFLAGS += -DDISASM_FOUR_ARGS_SIGNATURE
endif
ifeq (${IS_64_BIT}, 1)
ifndef NO_PERF_READ_VDSO32
$(call feature_check,compile-32)
ifeq ($(feature-compile-32), 1)
CFLAGS += -DHAVE_PERF_READ_VDSO32
else
NO_PERF_READ_VDSO32 := 1
endif
endif
ifneq ($(SRCARCH), x86)
NO_PERF_READ_VDSOX32 := 1
endif
ifndef NO_PERF_READ_VDSOX32
$(call feature_check,compile-x32)
ifeq ($(feature-compile-x32), 1)
CFLAGS += -DHAVE_PERF_READ_VDSOX32
else
NO_PERF_READ_VDSOX32 := 1
endif
endif
else
NO_PERF_READ_VDSO32 := 1
NO_PERF_READ_VDSOX32 := 1
endif
ifndef NO_LIBBABELTRACE
$(call feature_check,libbabeltrace)
ifeq ($(feature-libbabeltrace), 1)
perf tools: Add feature check for libbabeltrace Adding feature check for babeltrace library [1], which will be used for perf data file CTF [2] conversion in following patches. The babeltrace library is now automatically detected as standard feature. It's possible to specify LIBBABELTRACE_DIR make variable to specify location of installed libbabeltrace, like: $ make LIBBABELTRACE_DIR=/opt/libbabeltrace/ BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libbabeltrace: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... DWARF post unwind library: libunwind NOTE The installation of the [1] to to used by above make: $ git clone git://git.efficios.com/babeltrace.git $ cd babeltrace $ vim README $ ./bootstrap $ ./configure --prefix=/opt/libbabeltrace $ make prefix=/opt/libbabeltrace $ sudo make install prefix=/opt/libbabeltrace Please make sure that the /opt/libbabeltrace/lib directory is in your LD_LIBRARY_PATH: $ export LD_LIBRARY_PATH=/opt/libbabeltrace/lib [1] babeltrace - http://www.efficios.com/babeltrace [2] Common Trace Format - http://www.efficios.com/ctf Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-2-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ Added missing babeltrace build instructions ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 01:16:58 +03:00
CFLAGS += -DHAVE_LIBBABELTRACE_SUPPORT $(LIBBABELTRACE_CFLAGS)
LDFLAGS += $(LIBBABELTRACE_LDFLAGS)
EXTLIBS += -lbabeltrace-ctf
perf data: Add perf data to CTF conversion support Adding 'perf data convert' to convert perf data file into different format. This patch adds support for CTF format conversion. To convert perf.data into CTF run: $ perf data convert --to-ctf=./ctf-data/ [ perf data convert: Converted 'perf.data' into CTF data './ctf-data/' ] [ perf data convert: Converted and wrote 11.268 MB (100230 samples) ] The command will create CTF metadata out of perf.data file (or one specified via -i option) and then convert all sample events into single CTF stream. Each sample_type bit is translated into separated CTF event field apart from following exceptions: PERF_SAMPLE_RAW - added in next patch PERF_SAMPLE_READ - TODO PERF_SAMPLE_CALLCHAIN - TODO PERF_SAMPLE_BRANCH_STACK - TODO PERF_SAMPLE_REGS_USER - TODO PERF_SAMPLE_STACK_USER - TODO $ perf --debug=data-convert=2 data convert ... The converted CTF data could be analyzed by CTF tools, like babletrace or tracecompass [1]. $ babeltrace ./ctf-data/ [03:19:13.962125533] (+?.?????????) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962130001] (+0.000004468) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 1 } [03:19:13.962131936] (+0.000001935) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 8 } [03:19:13.962133732] (+0.000001796) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 114 } [03:19:13.962135557] (+0.000001825) cycles: { }, { ip = 0xFFFFFFFF8105443A, tid = 20714, pid = 20714, period = 2087 } [03:19:13.962137627] (+0.000002070) cycles: { }, { ip = 0xFFFFFFFF81361938, tid = 20714, pid = 20714, period = 37582 } [03:19:13.962161091] (+0.000023464) cycles: { }, { ip = 0xFFFFFFFF8124218F, tid = 20714, pid = 20714, period = 600246 } [03:19:13.962517569] (+0.000356478) cycles: { }, { ip = 0xFFFFFFFF811A75DB, tid = 20714, pid = 20714, period = 1325731 } [03:19:13.969518008] (+0.007000439) cycles: { }, { ip = 0x34080917B2, tid = 20714, pid = 20714, period = 1144298 } The following members to the ctf-environment were decided to be added to distinguish and specify perf CTF data: - domain It says "kernel" because it contains a kernel trace (not to be confused with a user space like lttng-ust does) - tracer_name It says perf. This can be used to distinguish between lttng and perf CTF based trace. - version The kernel version from stream. In addition to release, this is what it looks like on a Debian kernel: release = "3.14-1-amd64"; version = "3.14.0"; [1] http://projects.eclipse.org/projects/tools.tracecompass Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-4-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 01:17:00 +03:00
$(call detected,CONFIG_LIBBABELTRACE)
else
msg := $(warning No libbabeltrace found, disables 'perf data' CTF format support, please install libbabeltrace-dev[el]/libbabeltrace-ctf-dev);
perf tools: Add feature check for libbabeltrace Adding feature check for babeltrace library [1], which will be used for perf data file CTF [2] conversion in following patches. The babeltrace library is now automatically detected as standard feature. It's possible to specify LIBBABELTRACE_DIR make variable to specify location of installed libbabeltrace, like: $ make LIBBABELTRACE_DIR=/opt/libbabeltrace/ BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... libbabeltrace: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... DWARF post unwind library: libunwind NOTE The installation of the [1] to to used by above make: $ git clone git://git.efficios.com/babeltrace.git $ cd babeltrace $ vim README $ ./bootstrap $ ./configure --prefix=/opt/libbabeltrace $ make prefix=/opt/libbabeltrace $ sudo make install prefix=/opt/libbabeltrace Please make sure that the /opt/libbabeltrace/lib directory is in your LD_LIBRARY_PATH: $ export LD_LIBRARY_PATH=/opt/libbabeltrace/lib [1] babeltrace - http://www.efficios.com/babeltrace [2] Common Trace Format - http://www.efficios.com/ctf Signed-off-by: Jiri Olsa <jolsa@kernel.org> Acked-by: Namhyung Kim <namhyung@kernel.org> Reviewed-by: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jeremie Galarneau <jgalar@efficios.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/1424470628-5969-2-git-send-email-jolsa@kernel.org Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> [ Added missing babeltrace build instructions ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-02-21 01:16:58 +03:00
endif
endif
ifndef NO_AUXTRACE
ifeq ($(SRCARCH),x86)
ifeq ($(feature-get_cpuid), 0)
msg := $(warning Your gcc lacks the __get_cpuid() builtin, disables support for auxtrace/Intel PT, please install a newer gcc);
NO_AUXTRACE := 1
endif
endif
ifndef NO_AUXTRACE
$(call detected,CONFIG_AUXTRACE)
CFLAGS += -DHAVE_AUXTRACE_SUPPORT
ifeq ($(feature-reallocarray), 0)
CFLAGS += -DCOMPAT_NEED_REALLOCARRAY
endif
endif
endif
ifndef NO_JVMTI
ifneq (,$(wildcard /usr/sbin/update-java-alternatives))
JDIR=$(shell /usr/sbin/update-java-alternatives -l | head -1 | awk '{print $$3}')
else
ifneq (,$(wildcard /usr/sbin/alternatives))
JDIR=$(shell /usr/sbin/alternatives --display java | tail -1 | cut -d' ' -f 5 | sed -e 's%/jre/bin/java.%%g' -e 's%/bin/java.%%g')
endif
endif
ifndef JDIR
$(warning No alternatives command found, you need to set JDIR= to point to the root of your Java directory)
NO_JVMTI := 1
endif
endif
ifndef NO_JVMTI
FEATURE_CHECK_CFLAGS-jvmti := -I$(JDIR)/include -I$(JDIR)/include/linux
$(call feature_check,jvmti)
ifeq ($(feature-jvmti), 1)
$(call detected_var,JDIR)
ifndef NO_JVMTI_CMLR
FEATURE_CHECK_CFLAGS-jvmti-cmlr := $(FEATURE_CHECK_CFLAGS-jvmti)
$(call feature_check,jvmti-cmlr)
ifeq ($(feature-jvmti-cmlr), 1)
CFLAGS += -DHAVE_JVMTI_CMLR
endif
endif # NO_JVMTI_CMLR
else
$(warning No openjdk development package found, please install JDK package, e.g. openjdk-8-jdk, java-1.8.0-openjdk-devel)
NO_JVMTI := 1
endif
endif
USE_CXX = 0
USE_CLANGLLVM = 0
ifdef LIBCLANGLLVM
$(call feature_check,cxx)
ifneq ($(feature-cxx), 1)
msg := $(warning No g++ found, disable clang and llvm support. Please install g++)
else
$(call feature_check,llvm)
perf build: Check LLVM version in feature check Cancel builtin llvm and clang support when LLVM version is less than 3.9.0: following commits uses newer API. Since Clang/LLVM's API is not guaranteed to be stable, add a test-llvm-version.cpp feature checker, issue warning if LLVM found in compiling environment is not tested yet. Committer Notes: Testing it: Environment: $ cat /etc/fedora-release Fedora release 25 (Twenty Five) $ rpm -q llvm-devel clang-devel llvm-devel-3.8.0-1.fc25.x86_64 clang-devel-3.8.0-2.fc25.x86_64 $ Before: $ make -k LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: tools/include/uapi/linux/bpf.h differs from kernel Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel INSTALL GTK UI LINK /tmp/build/perf/perf /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::createCompilerInvocation(llvm::SmallVector<char const*, 16u>, llvm::StringRef&, clang::DiagnosticsEngine&)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:56: undefined reference to `clang::tooling::newInvocation(clang::DiagnosticsEngine*, llvm::SmallVector<char const*, 16u> const&)' /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::getModuleFromSource(llvm::SmallVector<char const*, 16u>, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:68: undefined reference to `clang::CompilerInstance::CompilerInstance(std::shared_ptr<clang::PCHContainerOperations>, bool)' /home/acme/git/linux/tools/perf/util/c++/clang.cpp:69: undefined reference to `clang::CompilerInstance::createDiagnostics(clang::DiagnosticConsumer*, bool)' <SNIP> After: Makefile.config:807: No suitable libLLVM found, disabling builtin clang and llvm support. Please install llvm-dev(el) (>= 3.9.0) Updating the environment to a locally built LLVM 4.0 + clang 3.9 (forgot to git pull, duh) combo, all works as expected, it is properly detected and built into the resulting perf binary. Signed-off-by: Wang Nan <wangnan0@huawei.com> Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161206072230.7651-1-wangnan0@huawei.com [ Change the warning message a bit (add 'suitable' and 'builtin'), clarifying it, see committer notes above ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-06 10:22:30 +03:00
$(call feature_check,llvm-version)
ifneq ($(feature-llvm), 1)
perf build: Check LLVM version in feature check Cancel builtin llvm and clang support when LLVM version is less than 3.9.0: following commits uses newer API. Since Clang/LLVM's API is not guaranteed to be stable, add a test-llvm-version.cpp feature checker, issue warning if LLVM found in compiling environment is not tested yet. Committer Notes: Testing it: Environment: $ cat /etc/fedora-release Fedora release 25 (Twenty Five) $ rpm -q llvm-devel clang-devel llvm-devel-3.8.0-1.fc25.x86_64 clang-devel-3.8.0-2.fc25.x86_64 $ Before: $ make -k LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: tools/include/uapi/linux/bpf.h differs from kernel Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel INSTALL GTK UI LINK /tmp/build/perf/perf /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::createCompilerInvocation(llvm::SmallVector<char const*, 16u>, llvm::StringRef&, clang::DiagnosticsEngine&)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:56: undefined reference to `clang::tooling::newInvocation(clang::DiagnosticsEngine*, llvm::SmallVector<char const*, 16u> const&)' /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::getModuleFromSource(llvm::SmallVector<char const*, 16u>, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:68: undefined reference to `clang::CompilerInstance::CompilerInstance(std::shared_ptr<clang::PCHContainerOperations>, bool)' /home/acme/git/linux/tools/perf/util/c++/clang.cpp:69: undefined reference to `clang::CompilerInstance::createDiagnostics(clang::DiagnosticConsumer*, bool)' <SNIP> After: Makefile.config:807: No suitable libLLVM found, disabling builtin clang and llvm support. Please install llvm-dev(el) (>= 3.9.0) Updating the environment to a locally built LLVM 4.0 + clang 3.9 (forgot to git pull, duh) combo, all works as expected, it is properly detected and built into the resulting perf binary. Signed-off-by: Wang Nan <wangnan0@huawei.com> Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161206072230.7651-1-wangnan0@huawei.com [ Change the warning message a bit (add 'suitable' and 'builtin'), clarifying it, see committer notes above ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-06 10:22:30 +03:00
msg := $(warning No suitable libLLVM found, disabling builtin clang and LLVM support. Please install llvm-dev(el) (>= 3.9.0))
else
$(call feature_check,clang)
ifneq ($(feature-clang), 1)
perf build: Check LLVM version in feature check Cancel builtin llvm and clang support when LLVM version is less than 3.9.0: following commits uses newer API. Since Clang/LLVM's API is not guaranteed to be stable, add a test-llvm-version.cpp feature checker, issue warning if LLVM found in compiling environment is not tested yet. Committer Notes: Testing it: Environment: $ cat /etc/fedora-release Fedora release 25 (Twenty Five) $ rpm -q llvm-devel clang-devel llvm-devel-3.8.0-1.fc25.x86_64 clang-devel-3.8.0-2.fc25.x86_64 $ Before: $ make -k LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: tools/include/uapi/linux/bpf.h differs from kernel Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel INSTALL GTK UI LINK /tmp/build/perf/perf /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::createCompilerInvocation(llvm::SmallVector<char const*, 16u>, llvm::StringRef&, clang::DiagnosticsEngine&)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:56: undefined reference to `clang::tooling::newInvocation(clang::DiagnosticsEngine*, llvm::SmallVector<char const*, 16u> const&)' /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::getModuleFromSource(llvm::SmallVector<char const*, 16u>, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:68: undefined reference to `clang::CompilerInstance::CompilerInstance(std::shared_ptr<clang::PCHContainerOperations>, bool)' /home/acme/git/linux/tools/perf/util/c++/clang.cpp:69: undefined reference to `clang::CompilerInstance::createDiagnostics(clang::DiagnosticConsumer*, bool)' <SNIP> After: Makefile.config:807: No suitable libLLVM found, disabling builtin clang and llvm support. Please install llvm-dev(el) (>= 3.9.0) Updating the environment to a locally built LLVM 4.0 + clang 3.9 (forgot to git pull, duh) combo, all works as expected, it is properly detected and built into the resulting perf binary. Signed-off-by: Wang Nan <wangnan0@huawei.com> Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161206072230.7651-1-wangnan0@huawei.com [ Change the warning message a bit (add 'suitable' and 'builtin'), clarifying it, see committer notes above ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-06 10:22:30 +03:00
msg := $(warning No suitable libclang found, disabling builtin clang and LLVM support. Please install libclang-dev(el) (>= 3.9.0))
else
CFLAGS += -DHAVE_LIBCLANGLLVM_SUPPORT
CXXFLAGS += -DHAVE_LIBCLANGLLVM_SUPPORT -I$(shell $(LLVM_CONFIG) --includedir)
$(call detected,CONFIG_CXX)
$(call detected,CONFIG_CLANGLLVM)
USE_CXX = 1
USE_LLVM = 1
USE_CLANG = 1
perf build: Check LLVM version in feature check Cancel builtin llvm and clang support when LLVM version is less than 3.9.0: following commits uses newer API. Since Clang/LLVM's API is not guaranteed to be stable, add a test-llvm-version.cpp feature checker, issue warning if LLVM found in compiling environment is not tested yet. Committer Notes: Testing it: Environment: $ cat /etc/fedora-release Fedora release 25 (Twenty Five) $ rpm -q llvm-devel clang-devel llvm-devel-3.8.0-1.fc25.x86_64 clang-devel-3.8.0-2.fc25.x86_64 $ Before: $ make -k LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: tools/include/uapi/linux/bpf.h differs from kernel Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel INSTALL GTK UI LINK /tmp/build/perf/perf /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::createCompilerInvocation(llvm::SmallVector<char const*, 16u>, llvm::StringRef&, clang::DiagnosticsEngine&)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:56: undefined reference to `clang::tooling::newInvocation(clang::DiagnosticsEngine*, llvm::SmallVector<char const*, 16u> const&)' /tmp/build/perf/libperf.a(libperf-in.o): In function `perf::getModuleFromSource(llvm::SmallVector<char const*, 16u>, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)': /home/acme/git/linux/tools/perf/util/c++/clang.cpp:68: undefined reference to `clang::CompilerInstance::CompilerInstance(std::shared_ptr<clang::PCHContainerOperations>, bool)' /home/acme/git/linux/tools/perf/util/c++/clang.cpp:69: undefined reference to `clang::CompilerInstance::createDiagnostics(clang::DiagnosticConsumer*, bool)' <SNIP> After: Makefile.config:807: No suitable libLLVM found, disabling builtin clang and llvm support. Please install llvm-dev(el) (>= 3.9.0) Updating the environment to a locally built LLVM 4.0 + clang 3.9 (forgot to git pull, duh) combo, all works as expected, it is properly detected and built into the resulting perf binary. Signed-off-by: Wang Nan <wangnan0@huawei.com> Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161206072230.7651-1-wangnan0@huawei.com [ Change the warning message a bit (add 'suitable' and 'builtin'), clarifying it, see committer notes above ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2016-12-06 10:22:30 +03:00
ifneq ($(feature-llvm-version),1)
msg := $(warning This version of LLVM is not tested. May cause build errors)
endif
endif
endif
endif
endif
perf tools: Add optional support for libpfm4 This patch links perf with the libpfm4 library if it is available and LIBPFM4 is passed to the build. The libpfm4 library contains hardware event tables for all processors supported by perf_events. It is a helper library that helps convert from a symbolic event name to the event encoding required by the underlying kernel interface. This library is open-source and available from: http://perfmon2.sf.net. With this patch, it is possible to specify full hardware events by name. Hardware filters are also supported. Events must be specified via the --pfm-events and not -e option. Both options are active at the same time and it is possible to mix and match: $ perf stat --pfm-events inst_retired:any_p:c=1:i -e cycles .... One needs to explicitely ask for its inclusion by using the LIBPFM4 make command line option, ie its opt-in rather than opt-out of feature detection and build support. Signed-off-by: Stephane Eranian <eranian@google.com> Reviewed-by: Ian Rogers <irogers@google.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Alexei Starovoitov <ast@kernel.org> Cc: Alexey Budankov <alexey.budankov@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Andrii Nakryiko <andriin@fb.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Igor Lubashev <ilubashe@akamai.com> Cc: Jin Yao <yao.jin@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Jiwei Sun <jiwei.sun@windriver.com> Cc: John Garry <john.garry@huawei.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Leo Yan <leo.yan@linaro.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Martin KaFai Lau <kafai@fb.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yonghong Song <yhs@fb.com> Cc: bpf@vger.kernel.org Cc: netdev@vger.kernel.org Cc: yuzhoujian <yuzhoujian@didichuxing.com> Link: http://lore.kernel.org/lkml/20200505182943.218248-2-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2020-05-05 21:29:43 +03:00
ifdef LIBPFM4
$(call feature_check,libpfm4)
ifeq ($(feature-libpfm4), 1)
CFLAGS += -DHAVE_LIBPFM
EXTLIBS += -lpfm
ASCIIDOC_EXTRA = -aHAVE_LIBPFM=1
$(call detected,CONFIG_LIBPFM4)
else
msg := $(warning libpfm4 not found, disables libpfm4 support. Please install libpfm4-dev);
NO_LIBPFM4 := 1
endif
endif
ifdef LIBTRACEEVENT_DYNAMIC
$(call feature_check,libtraceevent)
ifeq ($(feature-libtraceevent), 1)
EXTLIBS += -ltraceevent
LIBTRACEEVENT_VERSION := $(shell $(PKG_CONFIG) --modversion libtraceevent)
LIBTRACEEVENT_VERSION_1 := $(word 1, $(subst ., ,$(LIBTRACEEVENT_VERSION)))
LIBTRACEEVENT_VERSION_2 := $(word 2, $(subst ., ,$(LIBTRACEEVENT_VERSION)))
LIBTRACEEVENT_VERSION_3 := $(word 3, $(subst ., ,$(LIBTRACEEVENT_VERSION)))
LIBTRACEEVENT_VERSION_CPP := $(shell expr $(LIBTRACEEVENT_VERSION_1) \* 255 \* 255 + $(LIBTRACEEVENT_VERSION_2) \* 255 + $(LIBTRACEEVENT_VERSION_3))
CFLAGS += -DLIBTRACEEVENT_VERSION=$(LIBTRACEEVENT_VERSION_CPP)
else
dummy := $(error Error: No libtraceevent devel library found, please install libtraceevent-devel);
endif
endif
ifdef LIBTRACEFS_DYNAMIC
$(call feature_check,libtracefs)
ifeq ($(feature-libtracefs), 1)
EXTLIBS += -ltracefs
LIBTRACEFS_VERSION := $(shell $(PKG_CONFIG) --modversion libtracefs)
LIBTRACEFS_VERSION_1 := $(word 1, $(subst ., ,$(LIBTRACEFS_VERSION)))
LIBTRACEFS_VERSION_2 := $(word 2, $(subst ., ,$(LIBTRACEFS_VERSION)))
LIBTRACEFS_VERSION_3 := $(word 3, $(subst ., ,$(LIBTRACEFS_VERSION)))
LIBTRACEFS_VERSION_CPP := $(shell expr $(LIBTRACEFS_VERSION_1) \* 255 \* 255 + $(LIBTRACEFS_VERSION_2) \* 255 + $(LIBTRACEFS_VERSION_3))
CFLAGS += -DLIBTRACEFS_VERSION=$(LIBTRACEFS_VERSION_CPP)
else
dummy := $(error Error: No libtracefs devel library found, please install libtracefs-dev);
endif
endif
# Among the variables below, these:
# perfexecdir
# perf_include_dir
perf bpf: Add 'examples' directories The first one is the bare minimum that bpf infrastructure accepts before it expects actual events to be set up: $ cat tools/perf/examples/bpf/empty.c char _license[] __attribute__((section("license"), used)) = "GPL"; int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE; $ If you remove that "version" line, then it will be refused with: # perf trace -e tools/perf/examples/bpf/empty.c event syntax error: 'tools/perf/examples/bpf/empty.c' \___ Failed to load tools/perf/examples/bpf/empty.c from source: 'version' section incorrect or lost (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # The next ones will, step by step, show simple filters, then the needs for headers will be made clear, it will be put in place and tested with new examples, rinse, repeat. Back to using this first one to test the perf+bpf infrastructure: If we run it will fail, as no functions are present connecting with, say, a tracepoint or a function using the kprobes or uprobes infrastructure: # perf trace -e tools/perf/examples/bpf/empty.c WARNING: event parser found nothing invalid or unsupported event: 'tools/perf/examples/bpf/empty.c' Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # But, if we set things up to dump the generated object file to a file, and do this after having run 'make install', still on the developer's $HOME directory: # cat ~/.perfconfig [llvm] dump-obj = true # # perf trace -e ~acme/lib/examples/perf/bpf/empty.c LLVM: dumping /home/acme/lib/examples/perf/bpf/empty.o WARNING: event parser found nothing invalid or unsupported event: '/home/acme/lib/examples/perf/bpf/empty.c' <SNIP> # We can look at the dumped object file: # ls -la ~acme/lib/examples/perf/bpf/empty.o -rw-r--r--. 1 root root 576 May 4 12:10 /home/acme/lib/examples/perf/bpf/empty.o # file ~acme/lib/examples/perf/bpf/empty.o /home/acme/lib/examples/perf/bpf/empty.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), not stripped # readelf -sw ~acme/lib/examples/perf/bpf/empty.o Symbol table '.symtab' contains 3 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 3 _license 2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 4 _version # # tools/bpf/bpftool/bpftool --pretty ~acme/lib/examples/perf/bpf/empty.o null # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-y7dkhakejz3013o0w21n98xd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-04 17:56:15 +03:00
# perf_examples_dir
# template_dir
# mandir
# infodir
# htmldir
# ETC_PERFCONFIG (but not sysconfdir)
# can be specified as a relative path some/where/else;
# this is interpreted as relative to $(prefix) and "perf" at
# runtime figures out where they are based on the path to the executable.
# This can help installing the suite in a relocatable way.
# Make the path relative to DESTDIR, not to prefix
ifndef DESTDIR
prefix ?= $(HOME)
endif
bindir_relative = bin
bindir = $(abspath $(prefix)/$(bindir_relative))
includedir_relative = include
includedir = $(abspath $(prefix)/$(includedir_relative))
mandir = share/man
infodir = share/info
perfexecdir = libexec/perf-core
perf build: Fix installation directory for eBPF The perf tool build and install is controlled via a Makefile. The 'install' rule creates directories and copies files. Among them are header files installed in /usr/lib/include/perf/bpf/. However all listed examples are installing its header files in /usr/lib/<tool-name>/...[/include]/header.h and not in /usr/lib/include/<tool-name>/.../header.h. Background information: Building the Fedora 28 glibc RPM on s390x and s390 fails on s390 (gcc -m31) as gcc is not able to find header-files like stdbool.h. In the glibc.spec file, you can see that glibc is configured with "--with-headers". In this case, first -nostdinc is added to the CFLAGS and then further include paths are added via -isystem. One of those paths should contain header files like stdbool.h. In order to get this path, gcc is invoked with: - on Fedora 28 (with 4.18 kernel): $ gcc -print-file-name=include /usr/lib/gcc/s390x-redhat-linux/8/include $ gcc -m31 -print-file-name=include /usr/lib/gcc/s390x-redhat-linux/8/../../../../lib/include => If perf is installed, this is: /usr/lib/include On my machine this directory is only containing the directory "perf". If perf is not installed gcc returns: /usr/lib/gcc/s390x-redhat-linux/8/include - on Ubuntu 18.04 (with 4.15 kernel): $ gcc -print-file-name=include /usr/lib/gcc/s390x-linux-gnu/7/include $ gcc -m31 -print-file-name=include /usr/lib/gcc/s390x-linux-gnu/7/include => gcc returns the correct path even if perf is installed. In each case, the introduction of the subdirectory /usr/lib/include leads to the regression that one can not build the glibc RPM for s390 anymore as gcc can not find headers like stdbool.h. To remedy this install bpf.h to /usr/lib/perf/include/bpf/bpf.h Output before using the command 'perf test -Fv 40': echo '...[bpf-program-source]...' | /usr/bin/clang ... \ -I/root/lib/include/perf/bpf ... ^^^^^^^^^^^^ ... [root@p23lp27 perf]# perf test -F 40 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : Ok [root@p23lp27 perf]# Output after using command 'perf test -Fv 40': echo '...[bpf-program-source]...' | /usr/bin/clang ... \ -I/root/lib/perf/include/bpf ... ^^^^^^^^^^^^ ... [root@p23lp27 perf]# perf test -F 40 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : Ok [root@p23lp27 perf]# Committer testing: While the above 'perf test -F 40' (or 'perf test bpf') will allow us to see that the correct path is now added via -I, to actually test this we better try to use a bpf script that includes files in the changed directory. We have the files that now reside in /root/lib/perf/examples/bpf/ to do just that: # tail -8 /root/lib/perf/examples/bpf/5sec.c #include <bpf.h> int probe(hrtimer_nanosleep, rqtp->tv_sec)(void *ctx, int err, long sec) { return sec == 5; } license(GPL); # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 4 0.333 (4000.086 ms): sleep/9248 nanosleep(rqtp: 0x7ffc155f3300) = 0 # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5 0.287 ( ): sleep/9659 nanosleep(rqtp: 0x7ffeafe38200) ... 0.290 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5 0.287 (5000.059 ms): sleep/9659 ... [continued]: nanosleep()) = 0 # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 6 0.247 (5999.951 ms): sleep/10068 nanosleep(rqtp: 0x7fff2086d900) = 0 # perf trace -e *sleep -e /root/lib/perf/examples/bpf/5sec.c sleep 5.987 0.293 ( ): sleep/10489 nanosleep(rqtp: 0x7ffdd4fc10e0) ... 0.296 ( ): perf_bpf_probe:hrtimer_nanosleep:(ffffffff9911efe0) tv_sec=5 0.293 (5986.912 ms): sleep/10489 ... [continued]: nanosleep()) = 0 # Suggested-by: Stefan Liebler <stli@linux.ibm.com> Suggested-by: Arnaldo Carvalho de Melo <acme@kernel.org> Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Fixes: 1b16fffa389d ("perf llvm-utils: Add bpf include path to clang command line") Link: http://lkml.kernel.org/r/20180731073254.91090-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-07-31 10:32:54 +03:00
perf_include_dir = lib/perf/include
perf_examples_dir = lib/perf/examples
sharedir = $(prefix)/share
template_dir = share/perf-core/templates
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 18:02:09 +03:00
STRACE_GROUPS_DIR = share/perf-core/strace/groups
htmldir = share/doc/perf-doc
tipdir = share/doc/perf-tip
srcdir = $(srctree)/tools/perf
ifeq ($(prefix),/usr)
sysconfdir = /etc
ETC_PERFCONFIG = $(sysconfdir)/perfconfig
else
sysconfdir = $(prefix)/etc
ETC_PERFCONFIG = etc/perfconfig
endif
ifndef lib
ifeq ($(SRCARCH)$(IS_64_BIT), x861)
lib = lib64
else
lib = lib
endif
endif # lib
libdir = $(prefix)/$(lib)
# Shell quote (do not use $(call) to accommodate ancient setups);
ETC_PERFCONFIG_SQ = $(subst ','\'',$(ETC_PERFCONFIG))
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 18:02:09 +03:00
STRACE_GROUPS_DIR_SQ = $(subst ','\'',$(STRACE_GROUPS_DIR))
DESTDIR_SQ = $(subst ','\'',$(DESTDIR))
bindir_SQ = $(subst ','\'',$(bindir))
includedir_SQ = $(subst ','\'',$(includedir))
mandir_SQ = $(subst ','\'',$(mandir))
infodir_SQ = $(subst ','\'',$(infodir))
perfexecdir_SQ = $(subst ','\'',$(perfexecdir))
perf_include_dir_SQ = $(subst ','\'',$(perf_include_dir))
perf bpf: Add 'examples' directories The first one is the bare minimum that bpf infrastructure accepts before it expects actual events to be set up: $ cat tools/perf/examples/bpf/empty.c char _license[] __attribute__((section("license"), used)) = "GPL"; int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE; $ If you remove that "version" line, then it will be refused with: # perf trace -e tools/perf/examples/bpf/empty.c event syntax error: 'tools/perf/examples/bpf/empty.c' \___ Failed to load tools/perf/examples/bpf/empty.c from source: 'version' section incorrect or lost (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # The next ones will, step by step, show simple filters, then the needs for headers will be made clear, it will be put in place and tested with new examples, rinse, repeat. Back to using this first one to test the perf+bpf infrastructure: If we run it will fail, as no functions are present connecting with, say, a tracepoint or a function using the kprobes or uprobes infrastructure: # perf trace -e tools/perf/examples/bpf/empty.c WARNING: event parser found nothing invalid or unsupported event: 'tools/perf/examples/bpf/empty.c' Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # But, if we set things up to dump the generated object file to a file, and do this after having run 'make install', still on the developer's $HOME directory: # cat ~/.perfconfig [llvm] dump-obj = true # # perf trace -e ~acme/lib/examples/perf/bpf/empty.c LLVM: dumping /home/acme/lib/examples/perf/bpf/empty.o WARNING: event parser found nothing invalid or unsupported event: '/home/acme/lib/examples/perf/bpf/empty.c' <SNIP> # We can look at the dumped object file: # ls -la ~acme/lib/examples/perf/bpf/empty.o -rw-r--r--. 1 root root 576 May 4 12:10 /home/acme/lib/examples/perf/bpf/empty.o # file ~acme/lib/examples/perf/bpf/empty.o /home/acme/lib/examples/perf/bpf/empty.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), not stripped # readelf -sw ~acme/lib/examples/perf/bpf/empty.o Symbol table '.symtab' contains 3 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 3 _license 2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 4 _version # # tools/bpf/bpftool/bpftool --pretty ~acme/lib/examples/perf/bpf/empty.o null # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-y7dkhakejz3013o0w21n98xd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-04 17:56:15 +03:00
perf_examples_dir_SQ = $(subst ','\'',$(perf_examples_dir))
template_dir_SQ = $(subst ','\'',$(template_dir))
htmldir_SQ = $(subst ','\'',$(htmldir))
tipdir_SQ = $(subst ','\'',$(tipdir))
prefix_SQ = $(subst ','\'',$(prefix))
sysconfdir_SQ = $(subst ','\'',$(sysconfdir))
libdir_SQ = $(subst ','\'',$(libdir))
srcdir_SQ = $(subst ','\'',$(srcdir))
ifneq ($(filter /%,$(firstword $(perfexecdir))),)
perfexec_instdir = $(perfexecdir)
perf_include_instdir = $(perf_include_dir)
perf bpf: Add 'examples' directories The first one is the bare minimum that bpf infrastructure accepts before it expects actual events to be set up: $ cat tools/perf/examples/bpf/empty.c char _license[] __attribute__((section("license"), used)) = "GPL"; int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE; $ If you remove that "version" line, then it will be refused with: # perf trace -e tools/perf/examples/bpf/empty.c event syntax error: 'tools/perf/examples/bpf/empty.c' \___ Failed to load tools/perf/examples/bpf/empty.c from source: 'version' section incorrect or lost (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # The next ones will, step by step, show simple filters, then the needs for headers will be made clear, it will be put in place and tested with new examples, rinse, repeat. Back to using this first one to test the perf+bpf infrastructure: If we run it will fail, as no functions are present connecting with, say, a tracepoint or a function using the kprobes or uprobes infrastructure: # perf trace -e tools/perf/examples/bpf/empty.c WARNING: event parser found nothing invalid or unsupported event: 'tools/perf/examples/bpf/empty.c' Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # But, if we set things up to dump the generated object file to a file, and do this after having run 'make install', still on the developer's $HOME directory: # cat ~/.perfconfig [llvm] dump-obj = true # # perf trace -e ~acme/lib/examples/perf/bpf/empty.c LLVM: dumping /home/acme/lib/examples/perf/bpf/empty.o WARNING: event parser found nothing invalid or unsupported event: '/home/acme/lib/examples/perf/bpf/empty.c' <SNIP> # We can look at the dumped object file: # ls -la ~acme/lib/examples/perf/bpf/empty.o -rw-r--r--. 1 root root 576 May 4 12:10 /home/acme/lib/examples/perf/bpf/empty.o # file ~acme/lib/examples/perf/bpf/empty.o /home/acme/lib/examples/perf/bpf/empty.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), not stripped # readelf -sw ~acme/lib/examples/perf/bpf/empty.o Symbol table '.symtab' contains 3 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 3 _license 2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 4 _version # # tools/bpf/bpftool/bpftool --pretty ~acme/lib/examples/perf/bpf/empty.o null # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-y7dkhakejz3013o0w21n98xd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-04 17:56:15 +03:00
perf_examples_instdir = $(perf_examples_dir)
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 18:02:09 +03:00
STRACE_GROUPS_INSTDIR = $(STRACE_GROUPS_DIR)
tip_instdir = $(tipdir)
else
perfexec_instdir = $(prefix)/$(perfexecdir)
perf_include_instdir = $(prefix)/$(perf_include_dir)
perf bpf: Add 'examples' directories The first one is the bare minimum that bpf infrastructure accepts before it expects actual events to be set up: $ cat tools/perf/examples/bpf/empty.c char _license[] __attribute__((section("license"), used)) = "GPL"; int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE; $ If you remove that "version" line, then it will be refused with: # perf trace -e tools/perf/examples/bpf/empty.c event syntax error: 'tools/perf/examples/bpf/empty.c' \___ Failed to load tools/perf/examples/bpf/empty.c from source: 'version' section incorrect or lost (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # The next ones will, step by step, show simple filters, then the needs for headers will be made clear, it will be put in place and tested with new examples, rinse, repeat. Back to using this first one to test the perf+bpf infrastructure: If we run it will fail, as no functions are present connecting with, say, a tracepoint or a function using the kprobes or uprobes infrastructure: # perf trace -e tools/perf/examples/bpf/empty.c WARNING: event parser found nothing invalid or unsupported event: 'tools/perf/examples/bpf/empty.c' Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # But, if we set things up to dump the generated object file to a file, and do this after having run 'make install', still on the developer's $HOME directory: # cat ~/.perfconfig [llvm] dump-obj = true # # perf trace -e ~acme/lib/examples/perf/bpf/empty.c LLVM: dumping /home/acme/lib/examples/perf/bpf/empty.o WARNING: event parser found nothing invalid or unsupported event: '/home/acme/lib/examples/perf/bpf/empty.c' <SNIP> # We can look at the dumped object file: # ls -la ~acme/lib/examples/perf/bpf/empty.o -rw-r--r--. 1 root root 576 May 4 12:10 /home/acme/lib/examples/perf/bpf/empty.o # file ~acme/lib/examples/perf/bpf/empty.o /home/acme/lib/examples/perf/bpf/empty.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), not stripped # readelf -sw ~acme/lib/examples/perf/bpf/empty.o Symbol table '.symtab' contains 3 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 3 _license 2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 4 _version # # tools/bpf/bpftool/bpftool --pretty ~acme/lib/examples/perf/bpf/empty.o null # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-y7dkhakejz3013o0w21n98xd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-04 17:56:15 +03:00
perf_examples_instdir = $(prefix)/$(perf_examples_dir)
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 18:02:09 +03:00
STRACE_GROUPS_INSTDIR = $(prefix)/$(STRACE_GROUPS_DIR)
tip_instdir = $(prefix)/$(tipdir)
endif
perfexec_instdir_SQ = $(subst ','\'',$(perfexec_instdir))
perf_include_instdir_SQ = $(subst ','\'',$(perf_include_instdir))
perf bpf: Add 'examples' directories The first one is the bare minimum that bpf infrastructure accepts before it expects actual events to be set up: $ cat tools/perf/examples/bpf/empty.c char _license[] __attribute__((section("license"), used)) = "GPL"; int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE; $ If you remove that "version" line, then it will be refused with: # perf trace -e tools/perf/examples/bpf/empty.c event syntax error: 'tools/perf/examples/bpf/empty.c' \___ Failed to load tools/perf/examples/bpf/empty.c from source: 'version' section incorrect or lost (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # The next ones will, step by step, show simple filters, then the needs for headers will be made clear, it will be put in place and tested with new examples, rinse, repeat. Back to using this first one to test the perf+bpf infrastructure: If we run it will fail, as no functions are present connecting with, say, a tracepoint or a function using the kprobes or uprobes infrastructure: # perf trace -e tools/perf/examples/bpf/empty.c WARNING: event parser found nothing invalid or unsupported event: 'tools/perf/examples/bpf/empty.c' Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # But, if we set things up to dump the generated object file to a file, and do this after having run 'make install', still on the developer's $HOME directory: # cat ~/.perfconfig [llvm] dump-obj = true # # perf trace -e ~acme/lib/examples/perf/bpf/empty.c LLVM: dumping /home/acme/lib/examples/perf/bpf/empty.o WARNING: event parser found nothing invalid or unsupported event: '/home/acme/lib/examples/perf/bpf/empty.c' <SNIP> # We can look at the dumped object file: # ls -la ~acme/lib/examples/perf/bpf/empty.o -rw-r--r--. 1 root root 576 May 4 12:10 /home/acme/lib/examples/perf/bpf/empty.o # file ~acme/lib/examples/perf/bpf/empty.o /home/acme/lib/examples/perf/bpf/empty.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), not stripped # readelf -sw ~acme/lib/examples/perf/bpf/empty.o Symbol table '.symtab' contains 3 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 3 _license 2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 4 _version # # tools/bpf/bpftool/bpftool --pretty ~acme/lib/examples/perf/bpf/empty.o null # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-y7dkhakejz3013o0w21n98xd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-04 17:56:15 +03:00
perf_examples_instdir_SQ = $(subst ','\'',$(perf_examples_instdir))
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 18:02:09 +03:00
STRACE_GROUPS_INSTDIR_SQ = $(subst ','\'',$(STRACE_GROUPS_INSTDIR))
tip_instdir_SQ = $(subst ','\'',$(tip_instdir))
perf tools: Add build and install plugins targets Adding 'plugins' target along with the libtraceevent.a, so plugins are built together with traceevent library. Adding 'install-traceevent-plugins' Makefile install target, instructing perf to install plugins into: $(HOME)/.traceevent/plugins - If installed localy under $HOME $(DESTDIR)/$(prefix)/$(libdir)/traceevent/plugins - If installed globally Examples: $ make install ... $ find ~/.traceevent/plugins/ /home/jolsa/.traceevent/plugins/ /home/jolsa/.traceevent/plugins/plugin_mac80211.so /home/jolsa/.traceevent/plugins/plugin_kvm.so /home/jolsa/.traceevent/plugins/plugin_scsi.so /home/jolsa/.traceevent/plugins/plugin_sched_switch.so /home/jolsa/.traceevent/plugins/plugin_xen.so /home/jolsa/.traceevent/plugins/plugin_cfg80211.so /home/jolsa/.traceevent/plugins/plugin_function.so /home/jolsa/.traceevent/plugins/plugin_kmem.so /home/jolsa/.traceevent/plugins/plugin_hrtimer.so /home/jolsa/.traceevent/plugins/plugin_jbd2.so $ sudo make install DESTDIR=/opt/perf/ ... $ find /opt/perf/lib64/traceevent/plugins/ /opt/perf/lib64/traceevent/plugins/ /opt/perf/lib64/traceevent/plugins/plugin_kvm.so /opt/perf/lib64/traceevent/plugins/plugin_scsi.so /opt/perf/lib64/traceevent/plugins/plugin_mac80211.so /opt/perf/lib64/traceevent/plugins/plugin_hrtimer.so /opt/perf/lib64/traceevent/plugins/plugin_kmem.so /opt/perf/lib64/traceevent/plugins/plugin_jbd2.so /opt/perf/lib64/traceevent/plugins/plugin_sched_switch.so /opt/perf/lib64/traceevent/plugins/plugin_function.so /opt/perf/lib64/traceevent/plugins/plugin_cfg80211.so /opt/perf/lib64/traceevent/plugins/plugin_xen.so Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1386076182-14484-8-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-03 17:09:21 +04:00
# If we install to $(HOME) we keep the traceevent default:
# $(HOME)/.traceevent/plugins
# Otherwise we install plugins into the global $(libdir).
ifdef DESTDIR
plugindir=$(libdir)/traceevent/plugins
plugindir_SQ= $(subst ','\'',$(plugindir))
perf tools: Add build and install plugins targets Adding 'plugins' target along with the libtraceevent.a, so plugins are built together with traceevent library. Adding 'install-traceevent-plugins' Makefile install target, instructing perf to install plugins into: $(HOME)/.traceevent/plugins - If installed localy under $HOME $(DESTDIR)/$(prefix)/$(libdir)/traceevent/plugins - If installed globally Examples: $ make install ... $ find ~/.traceevent/plugins/ /home/jolsa/.traceevent/plugins/ /home/jolsa/.traceevent/plugins/plugin_mac80211.so /home/jolsa/.traceevent/plugins/plugin_kvm.so /home/jolsa/.traceevent/plugins/plugin_scsi.so /home/jolsa/.traceevent/plugins/plugin_sched_switch.so /home/jolsa/.traceevent/plugins/plugin_xen.so /home/jolsa/.traceevent/plugins/plugin_cfg80211.so /home/jolsa/.traceevent/plugins/plugin_function.so /home/jolsa/.traceevent/plugins/plugin_kmem.so /home/jolsa/.traceevent/plugins/plugin_hrtimer.so /home/jolsa/.traceevent/plugins/plugin_jbd2.so $ sudo make install DESTDIR=/opt/perf/ ... $ find /opt/perf/lib64/traceevent/plugins/ /opt/perf/lib64/traceevent/plugins/ /opt/perf/lib64/traceevent/plugins/plugin_kvm.so /opt/perf/lib64/traceevent/plugins/plugin_scsi.so /opt/perf/lib64/traceevent/plugins/plugin_mac80211.so /opt/perf/lib64/traceevent/plugins/plugin_hrtimer.so /opt/perf/lib64/traceevent/plugins/plugin_kmem.so /opt/perf/lib64/traceevent/plugins/plugin_jbd2.so /opt/perf/lib64/traceevent/plugins/plugin_sched_switch.so /opt/perf/lib64/traceevent/plugins/plugin_function.so /opt/perf/lib64/traceevent/plugins/plugin_cfg80211.so /opt/perf/lib64/traceevent/plugins/plugin_xen.so Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Steven Rostedt <rostedt@goodmis.org> Link: http://lkml.kernel.org/r/1386076182-14484-8-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2013-12-03 17:09:21 +04:00
endif
perf tools: Factor features display code Currently the we display all detected features/libraries by following rules: - if one of the features is missing - if it's build from clean tree This patch changes changes this behavior in several ways. - We no longer display all detected features, only detected libraries are displayed by default: $ make BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] The assumption is, that above libraries are the most interesting part of the detection, while we don't care much about detection of on-exit support. - If all above libraries are detected, the default is not shown on subsequent builds. - If one of the above libraries is missing, the detection output is forced. - The features status is stored in PERF-FEATURES file and the detection output is forced in case the there's difference between the file contents and currently detected features. - If you want to see all detected features, you can use VF=1 make variable, that forces the detected features output. $ make VF=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... backtrace: [ on ] ... fortify-source: [ on ] ... gtk2-infobar: [ on ] ... libelf-getphdrnum: [ on ] ... libelf-mmap: [ on ] ... libpython-version: [ on ] ... on-exit: [ on ] ... stackprotector-all: [ on ] ... timerfd: [ on ] ... libunwind-debug-frame: [ OFF ] ... bionic: [ OFF ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 19:52:54 +04:00
print_var = $(eval $(print_var_code)) $(info $(MSG))
define print_var_code
MSG = $(shell printf '...%30s: %s' $(1) $($(1)))
endef
perf tools: Factor features display code Currently the we display all detected features/libraries by following rules: - if one of the features is missing - if it's build from clean tree This patch changes changes this behavior in several ways. - We no longer display all detected features, only detected libraries are displayed by default: $ make BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] The assumption is, that above libraries are the most interesting part of the detection, while we don't care much about detection of on-exit support. - If all above libraries are detected, the default is not shown on subsequent builds. - If one of the above libraries is missing, the detection output is forced. - The features status is stored in PERF-FEATURES file and the detection output is forced in case the there's difference between the file contents and currently detected features. - If you want to see all detected features, you can use VF=1 make variable, that forces the detected features output. $ make VF=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... backtrace: [ on ] ... fortify-source: [ on ] ... gtk2-infobar: [ on ] ... libelf-getphdrnum: [ on ] ... libelf-mmap: [ on ] ... libpython-version: [ on ] ... on-exit: [ on ] ... stackprotector-all: [ on ] ... timerfd: [ on ] ... libunwind-debug-frame: [ OFF ] ... bionic: [ OFF ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 19:52:54 +04:00
ifeq ($(VF),1)
# Display EXTRA features which are detected manualy
# from here with feature_check call and thus cannot
# be partof global state output.
$(foreach feat,$(FEATURE_TESTS_EXTRA),$(call feature_print_status,$(feat),))
$(call print_var,prefix)
$(call print_var,bindir)
$(call print_var,libdir)
$(call print_var,sysconfdir)
$(call print_var,LIBUNWIND_DIR)
$(call print_var,LIBDW_DIR)
$(call print_var,JDIR)
ifeq ($(dwarf-post-unwind),1)
$(call feature_print_text,"DWARF post unwind library", $(dwarf-post-unwind-text))
endif
perf tools: Factor features display code Currently the we display all detected features/libraries by following rules: - if one of the features is missing - if it's build from clean tree This patch changes changes this behavior in several ways. - We no longer display all detected features, only detected libraries are displayed by default: $ make BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] The assumption is, that above libraries are the most interesting part of the detection, while we don't care much about detection of on-exit support. - If all above libraries are detected, the default is not shown on subsequent builds. - If one of the above libraries is missing, the detection output is forced. - The features status is stored in PERF-FEATURES file and the detection output is forced in case the there's difference between the file contents and currently detected features. - If you want to see all detected features, you can use VF=1 make variable, that forces the detected features output. $ make VF=1 BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libunwind: [ on ] ... backtrace: [ on ] ... fortify-source: [ on ] ... gtk2-infobar: [ on ] ... libelf-getphdrnum: [ on ] ... libelf-mmap: [ on ] ... libpython-version: [ on ] ... on-exit: [ on ] ... stackprotector-all: [ on ] ... timerfd: [ on ] ... libunwind-debug-frame: [ OFF ] ... bionic: [ OFF ] Signed-off-by: Jiri Olsa <jolsa@redhat.com> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jean Pihet <jean.pihet@linaro.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1392825179-5228-2-git-send-email-jolsa@redhat.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2014-02-19 19:52:54 +04:00
$(info )
endif
$(call detected_var,bindir_SQ)
$(call detected_var,PYTHON_WORD)
ifneq ($(OUTPUT),)
$(call detected_var,OUTPUT)
endif
$(call detected_var,htmldir_SQ)
$(call detected_var,infodir_SQ)
$(call detected_var,mandir_SQ)
$(call detected_var,ETC_PERFCONFIG_SQ)
perf trace: Support 'strace' syscall event groups I.e.: $ cat ~/share/perf-core/strace/groups/file access chmod creat execve faccessat getcwd lstat mkdir open openat quotactl readlink rename rmdir stat statfs symlink unlink $ Then, on a quiet desktop, try running this and then moving your mouse to see the deluge of mouse related activity: # perf probe 'vfs_getname=getname_flags:72 pathname=filename:string' Added new event: probe:vfs_getname (on getname_flags:72 with pathname=filename:string) You can now use it in all perf tools, such as: perf record -e probe:vfs_getname -aR sleep 1 # # trace --ev probe:vfs_getname --filter-pids 2232 -e file 0.042 (0.042 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.042 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/xterm") 0.100 (0.100 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.142 (0.018 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.142 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/index.theme") 0.192 (0.069 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory 0.230 (0.017 ms): mousetweaks/2235 open(filename: 0x14c3c10, mode: 438 ) ... 0.230 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/usr/share/icons/Adwaita/cursors/xterm") 0.253 (0.041 ms): mousetweaks/2235 ... [continued]: open()) = 14 0.459 (0.008 ms): mousetweaks/2235 open(filename: 0x14e3910, mode: 438 ) ... 0.459 ( ): probe:vfs_getname:(ffffffff812230bc) pathname="/home/acme/.icons/Adwaita/cursors/left_side") 0.468 (0.017 ms): mousetweaks/2235 ... [continued]: open()) = -1 ENOENT No such file or directory Need to combine that raw_syscalls:sys_enter(open) + probe:vfs_getname + raw_syscalls:sys_exit(open) sequence... Now, if you're bored, please write some more syscall groups, like the ones in 'strace' and send it our way :-) Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Milian Wolff <mail@milianw.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a42xklu59lcbxp7bbnic74a8@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2015-07-20 18:02:09 +03:00
$(call detected_var,STRACE_GROUPS_DIR_SQ)
$(call detected_var,prefix_SQ)
$(call detected_var,perfexecdir_SQ)
$(call detected_var,perf_include_dir_SQ)
perf bpf: Add 'examples' directories The first one is the bare minimum that bpf infrastructure accepts before it expects actual events to be set up: $ cat tools/perf/examples/bpf/empty.c char _license[] __attribute__((section("license"), used)) = "GPL"; int _version __attribute__((section("version"), used)) = LINUX_VERSION_CODE; $ If you remove that "version" line, then it will be refused with: # perf trace -e tools/perf/examples/bpf/empty.c event syntax error: 'tools/perf/examples/bpf/empty.c' \___ Failed to load tools/perf/examples/bpf/empty.c from source: 'version' section incorrect or lost (add -v to see detail) Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # The next ones will, step by step, show simple filters, then the needs for headers will be made clear, it will be put in place and tested with new examples, rinse, repeat. Back to using this first one to test the perf+bpf infrastructure: If we run it will fail, as no functions are present connecting with, say, a tracepoint or a function using the kprobes or uprobes infrastructure: # perf trace -e tools/perf/examples/bpf/empty.c WARNING: event parser found nothing invalid or unsupported event: 'tools/perf/examples/bpf/empty.c' Run 'perf list' for a list of valid events Usage: perf trace [<options>] [<command>] or: perf trace [<options>] -- <command> [<options>] or: perf trace record [<options>] [<command>] or: perf trace record [<options>] -- <command> [<options>] -e, --event <event> event/syscall selector. use 'perf list' to list available events # But, if we set things up to dump the generated object file to a file, and do this after having run 'make install', still on the developer's $HOME directory: # cat ~/.perfconfig [llvm] dump-obj = true # # perf trace -e ~acme/lib/examples/perf/bpf/empty.c LLVM: dumping /home/acme/lib/examples/perf/bpf/empty.o WARNING: event parser found nothing invalid or unsupported event: '/home/acme/lib/examples/perf/bpf/empty.c' <SNIP> # We can look at the dumped object file: # ls -la ~acme/lib/examples/perf/bpf/empty.o -rw-r--r--. 1 root root 576 May 4 12:10 /home/acme/lib/examples/perf/bpf/empty.o # file ~acme/lib/examples/perf/bpf/empty.o /home/acme/lib/examples/perf/bpf/empty.o: ELF 64-bit LSB relocatable, *unknown arch 0xf7* version 1 (SYSV), not stripped # readelf -sw ~acme/lib/examples/perf/bpf/empty.o Symbol table '.symtab' contains 3 entries: Num: Value Size Type Bind Vis Ndx Name 0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND 1: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 3 _license 2: 0000000000000000 0 NOTYPE GLOBAL DEFAULT 4 _version # # tools/bpf/bpftool/bpftool --pretty ~acme/lib/examples/perf/bpf/empty.o null # Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: https://lkml.kernel.org/n/tip-y7dkhakejz3013o0w21n98xd@git.kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2018-05-04 17:56:15 +03:00
$(call detected_var,perf_examples_dir_SQ)
$(call detected_var,tipdir_SQ)
$(call detected_var,srcdir_SQ)
$(call detected_var,LIBDIR)
$(call detected_var,GTK_CFLAGS)
$(call detected_var,PERL_EMBED_CCOPTS)
$(call detected_var,PYTHON_EMBED_CCOPTS)
ifneq ($(BISON_FILE_PREFIX_MAP),)
$(call detected_var,BISON_FILE_PREFIX_MAP)
endif
# re-generate FEATURE-DUMP as we may have called feature_check, found out
# extra libraries to add to LDFLAGS of some other test and then redo those
# tests, see the block about libbfd, disassembler-four-args, for instance.
$(shell rm -f $(FEATURE_DUMP_FILENAME))
$(foreach feat,$(FEATURE_TESTS),$(shell echo "$(call feature_assign,$(feat))" >> $(FEATURE_DUMP_FILENAME)))
ifeq ($(feature_display),1)
$(call feature_display_entries)
endif