WSL2-Linux-Kernel/drivers/lguest/hypercalls.c

302 строки
10 KiB
C
Исходник Обычный вид История

/*P:500 Just as userspace programs request kernel operations through a system
* call, the Guest requests Host operations through a "hypercall". You might
* notice this nomenclature doesn't really follow any logic, but the name has
* been around for long enough that we're stuck with it. As you'd expect, this
* code is basically a one big switch statement. :*/
/* Copyright (C) 2006 Rusty Russell IBM Corporation
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/uaccess.h>
#include <linux/syscalls.h>
#include <linux/mm.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <irq_vectors.h>
#include "lg.h"
/*H:120 This is the core hypercall routine: where the Guest gets what it
* wants. Or gets killed. Or, in the case of LHCALL_CRASH, both.
*
* Remember from the Guest: %eax == which call to make, and the arguments are
* packed into %edx, %ebx and %ecx if needed. */
static void do_hcall(struct lguest *lg, struct lguest_regs *regs)
{
switch (regs->eax) {
case LHCALL_FLUSH_ASYNC:
/* This call does nothing, except by breaking out of the Guest
* it makes us process all the asynchronous hypercalls. */
break;
case LHCALL_LGUEST_INIT:
/* You can't get here unless you're already initialized. Don't
* do that. */
kill_guest(lg, "already have lguest_data");
break;
case LHCALL_CRASH: {
/* Crash is such a trivial hypercall that we do it in four
* lines right here. */
char msg[128];
/* If the lgread fails, it will call kill_guest() itself; the
* kill_guest() with the message will be ignored. */
lgread(lg, msg, regs->edx, sizeof(msg));
msg[sizeof(msg)-1] = '\0';
kill_guest(lg, "CRASH: %s", msg);
break;
}
case LHCALL_FLUSH_TLB:
/* FLUSH_TLB comes in two flavors, depending on the
* argument: */
if (regs->edx)
guest_pagetable_clear_all(lg);
else
guest_pagetable_flush_user(lg);
break;
case LHCALL_BIND_DMA:
/* BIND_DMA really wants four arguments, but it's the only call
* which does. So the Guest packs the number of buffers and
* the interrupt number into the final argument, and we decode
* it here. This can legitimately fail, since we currently
* place a limit on the number of DMA pools a Guest can have.
* So we return true or false from this call. */
regs->eax = bind_dma(lg, regs->edx, regs->ebx,
regs->ecx >> 8, regs->ecx & 0xFF);
break;
/* All these calls simply pass the arguments through to the right
* routines. */
case LHCALL_SEND_DMA:
send_dma(lg, regs->edx, regs->ebx);
break;
case LHCALL_LOAD_GDT:
load_guest_gdt(lg, regs->edx, regs->ebx);
break;
case LHCALL_LOAD_IDT_ENTRY:
load_guest_idt_entry(lg, regs->edx, regs->ebx, regs->ecx);
break;
case LHCALL_NEW_PGTABLE:
guest_new_pagetable(lg, regs->edx);
break;
case LHCALL_SET_STACK:
guest_set_stack(lg, regs->edx, regs->ebx, regs->ecx);
break;
case LHCALL_SET_PTE:
guest_set_pte(lg, regs->edx, regs->ebx, mkgpte(regs->ecx));
break;
case LHCALL_SET_PMD:
guest_set_pmd(lg, regs->edx, regs->ebx);
break;
case LHCALL_LOAD_TLS:
guest_load_tls(lg, regs->edx);
break;
case LHCALL_SET_CLOCKEVENT:
guest_set_clockevent(lg, regs->edx);
break;
case LHCALL_TS:
/* This sets the TS flag, as we saw used in run_guest(). */
lg->ts = regs->edx;
break;
case LHCALL_HALT:
/* Similarly, this sets the halted flag for run_guest(). */
lg->halted = 1;
break;
default:
kill_guest(lg, "Bad hypercall %li\n", regs->eax);
}
}
/* Asynchronous hypercalls are easy: we just look in the array in the Guest's
* "struct lguest_data" and see if there are any new ones marked "ready".
*
* We are careful to do these in order: obviously we respect the order the
* Guest put them in the ring, but we also promise the Guest that they will
* happen before any normal hypercall (which is why we check this before
* checking for a normal hcall). */
static void do_async_hcalls(struct lguest *lg)
{
unsigned int i;
u8 st[LHCALL_RING_SIZE];
/* For simplicity, we copy the entire call status array in at once. */
if (copy_from_user(&st, &lg->lguest_data->hcall_status, sizeof(st)))
return;
/* We process "struct lguest_data"s hcalls[] ring once. */
for (i = 0; i < ARRAY_SIZE(st); i++) {
struct lguest_regs regs;
/* We remember where we were up to from last time. This makes
* sure that the hypercalls are done in the order the Guest
* places them in the ring. */
unsigned int n = lg->next_hcall;
/* 0xFF means there's no call here (yet). */
if (st[n] == 0xFF)
break;
/* OK, we have hypercall. Increment the "next_hcall" cursor,
* and wrap back to 0 if we reach the end. */
if (++lg->next_hcall == LHCALL_RING_SIZE)
lg->next_hcall = 0;
/* We copy the hypercall arguments into a fake register
* structure. This makes life simple for do_hcall(). */
if (get_user(regs.eax, &lg->lguest_data->hcalls[n].eax)
|| get_user(regs.edx, &lg->lguest_data->hcalls[n].edx)
|| get_user(regs.ecx, &lg->lguest_data->hcalls[n].ecx)
|| get_user(regs.ebx, &lg->lguest_data->hcalls[n].ebx)) {
kill_guest(lg, "Fetching async hypercalls");
break;
}
/* Do the hypercall, same as a normal one. */
do_hcall(lg, &regs);
/* Mark the hypercall done. */
if (put_user(0xFF, &lg->lguest_data->hcall_status[n])) {
kill_guest(lg, "Writing result for async hypercall");
break;
}
/* Stop doing hypercalls if we've just done a DMA to the
* Launcher: it needs to service this first. */
if (lg->dma_is_pending)
break;
}
}
/* Last of all, we look at what happens first of all. The very first time the
* Guest makes a hypercall, we end up here to set things up: */
static void initialize(struct lguest *lg)
{
u32 tsc_speed;
/* You can't do anything until you're initialized. The Guest knows the
* rules, so we're unforgiving here. */
if (lg->regs->eax != LHCALL_LGUEST_INIT) {
kill_guest(lg, "hypercall %li before LGUEST_INIT",
lg->regs->eax);
return;
}
/* We insist that the Time Stamp Counter exist and doesn't change with
* cpu frequency. Some devious chip manufacturers decided that TSC
* changes could be handled in software. I decided that time going
* backwards might be good for benchmarks, but it's bad for users.
*
* We also insist that the TSC be stable: the kernel detects unreliable
* TSCs for its own purposes, and we use that here. */
if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC) && !check_tsc_unstable())
tsc_speed = tsc_khz;
else
tsc_speed = 0;
/* The pointer to the Guest's "struct lguest_data" is the only
* argument. We check that address now. */
if (!lguest_address_ok(lg, lg->regs->edx, sizeof(*lg->lguest_data))) {
kill_guest(lg, "bad guest page %p", lg->lguest_data);
return;
}
/* Having checked it, we simply set lg->lguest_data to point straight
* into the Launcher's memory at the right place and then use
* copy_to_user/from_user from now on, instead of lgread/write. I put
* this in to show that I'm not immune to writing stupid
* optimizations. */
lg->lguest_data = lg->mem_base + lg->regs->edx;
/* The Guest tells us where we're not to deliver interrupts by putting
* the range of addresses into "struct lguest_data". */
if (get_user(lg->noirq_start, &lg->lguest_data->noirq_start)
|| get_user(lg->noirq_end, &lg->lguest_data->noirq_end)
/* We tell the Guest that it can't use the top 4MB of virtual
* addresses used by the Switcher. */
|| put_user(4U*1024*1024, &lg->lguest_data->reserve_mem)
|| put_user(tsc_speed, &lg->lguest_data->tsc_khz))
kill_guest(lg, "bad guest page %p", lg->lguest_data);
/* We write the current time into the Guest's data page once now. */
write_timestamp(lg);
/* This is the one case where the above accesses might have been the
* first write to a Guest page. This may have caused a copy-on-write
* fault, but the Guest might be referring to the old (read-only)
* page. */
guest_pagetable_clear_all(lg);
}
/* Now we've examined the hypercall code; our Guest can make requests. There
* is one other way we can do things for the Guest, as we see in
* emulate_insn(). */
/*H:110 Tricky point: we mark the hypercall as "done" once we've done it.
* Normally we don't need to do this: the Guest will run again and update the
* trap number before we come back around the run_guest() loop to
* do_hypercalls().
*
* However, if we are signalled or the Guest sends DMA to the Launcher, that
* loop will exit without running the Guest. When it comes back it would try
* to re-run the hypercall. */
static void clear_hcall(struct lguest *lg)
{
lg->regs->trapnum = 255;
}
/*H:100
* Hypercalls
*
* Remember from the Guest, hypercalls come in two flavors: normal and
* asynchronous. This file handles both of types.
*/
void do_hypercalls(struct lguest *lg)
{
/* Not initialized yet? */
if (unlikely(!lg->lguest_data)) {
/* Did the Guest make a hypercall? We might have come back for
* some other reason (an interrupt, a different trap). */
if (lg->regs->trapnum == LGUEST_TRAP_ENTRY) {
/* Set up the "struct lguest_data" */
initialize(lg);
/* The hypercall is done. */
clear_hcall(lg);
}
return;
}
/* The Guest has initialized.
*
* Look in the hypercall ring for the async hypercalls: */
do_async_hcalls(lg);
/* If we stopped reading the hypercall ring because the Guest did a
* SEND_DMA to the Launcher, we want to return now. Otherwise if the
* Guest asked us to do a hypercall, we do it. */
if (!lg->dma_is_pending && lg->regs->trapnum == LGUEST_TRAP_ENTRY) {
do_hcall(lg, lg->regs);
/* The hypercall is done. */
clear_hcall(lg);
}
}
/* This routine supplies the Guest with time: it's used for wallclock time at
* initial boot and as a rough time source if the TSC isn't available. */
void write_timestamp(struct lguest *lg)
{
struct timespec now;
ktime_get_real_ts(&now);
if (copy_to_user(&lg->lguest_data->time, &now, sizeof(struct timespec)))
kill_guest(lg, "Writing timestamp");
}