2006-09-21 22:31:26 +04:00
|
|
|
/*
|
|
|
|
|
* MPC8560 ADS Device Tree Source
|
|
|
|
|
*
|
|
|
|
|
* Copyright 2006 Freescale Semiconductor Inc.
|
|
|
|
|
*
|
|
|
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
|
|
|
* under the terms of the GNU General Public License as published by the
|
|
|
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
|
|
|
* option) any later version.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/ {
|
|
|
|
|
model = "MPC8560ADS";
|
|
|
|
|
compatible = "MPC85xxADS";
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
linux,phandle = <100>;
|
|
|
|
|
|
|
|
|
|
cpus {
|
|
|
|
|
#cpus = <1>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
linux,phandle = <200>;
|
|
|
|
|
|
|
|
|
|
PowerPC,8560@0 {
|
|
|
|
|
device_type = "cpu";
|
|
|
|
|
reg = <0>;
|
|
|
|
|
d-cache-line-size = <20>; // 32 bytes
|
|
|
|
|
i-cache-line-size = <20>; // 32 bytes
|
|
|
|
|
d-cache-size = <8000>; // L1, 32K
|
|
|
|
|
i-cache-size = <8000>; // L1, 32K
|
|
|
|
|
timebase-frequency = <04ead9a0>;
|
|
|
|
|
bus-frequency = <13ab6680>;
|
|
|
|
|
clock-frequency = <312c8040>;
|
|
|
|
|
32-bit;
|
|
|
|
|
linux,phandle = <201>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
memory {
|
|
|
|
|
device_type = "memory";
|
|
|
|
|
linux,phandle = <300>;
|
|
|
|
|
reg = <00000000 10000000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
soc8560@e0000000 {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
#interrupt-cells = <2>;
|
|
|
|
|
device_type = "soc";
|
|
|
|
|
ranges = <0 e0000000 00100000>;
|
|
|
|
|
reg = <e0000000 00000200>;
|
|
|
|
|
bus-frequency = <13ab6680>;
|
|
|
|
|
|
|
|
|
|
mdio@24520 {
|
|
|
|
|
device_type = "mdio";
|
|
|
|
|
compatible = "gianfar";
|
|
|
|
|
reg = <24520 20>;
|
|
|
|
|
linux,phandle = <24520>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
ethernet-phy@0 {
|
|
|
|
|
linux,phandle = <2452000>;
|
|
|
|
|
interrupt-parent = <40000>;
|
|
|
|
|
interrupts = <35 1>;
|
|
|
|
|
reg = <0>;
|
|
|
|
|
device_type = "ethernet-phy";
|
|
|
|
|
};
|
|
|
|
|
ethernet-phy@1 {
|
|
|
|
|
linux,phandle = <2452001>;
|
|
|
|
|
interrupt-parent = <40000>;
|
|
|
|
|
interrupts = <35 1>;
|
|
|
|
|
reg = <1>;
|
|
|
|
|
device_type = "ethernet-phy";
|
|
|
|
|
};
|
|
|
|
|
ethernet-phy@2 {
|
|
|
|
|
linux,phandle = <2452002>;
|
|
|
|
|
interrupt-parent = <40000>;
|
|
|
|
|
interrupts = <37 1>;
|
|
|
|
|
reg = <2>;
|
|
|
|
|
device_type = "ethernet-phy";
|
|
|
|
|
};
|
|
|
|
|
ethernet-phy@3 {
|
|
|
|
|
linux,phandle = <2452003>;
|
|
|
|
|
interrupt-parent = <40000>;
|
|
|
|
|
interrupts = <37 1>;
|
|
|
|
|
reg = <3>;
|
|
|
|
|
device_type = "ethernet-phy";
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ethernet@24000 {
|
|
|
|
|
device_type = "network";
|
|
|
|
|
model = "TSEC";
|
|
|
|
|
compatible = "gianfar";
|
|
|
|
|
reg = <24000 1000>;
|
|
|
|
|
address = [ 00 00 0C 00 00 FD ];
|
|
|
|
|
interrupts = <d 2 e 2 12 2>;
|
|
|
|
|
interrupt-parent = <40000>;
|
|
|
|
|
phy-handle = <2452000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
ethernet@25000 {
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <0>;
|
|
|
|
|
device_type = "network";
|
|
|
|
|
model = "TSEC";
|
|
|
|
|
compatible = "gianfar";
|
|
|
|
|
reg = <25000 1000>;
|
|
|
|
|
address = [ 00 00 0C 00 01 FD ];
|
|
|
|
|
interrupts = <13 2 14 2 18 2>;
|
|
|
|
|
interrupt-parent = <40000>;
|
|
|
|
|
phy-handle = <2452001>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pci@8000 {
|
|
|
|
|
linux,phandle = <8000>;
|
|
|
|
|
#interrupt-cells = <1>;
|
|
|
|
|
#size-cells = <2>;
|
|
|
|
|
#address-cells = <3>;
|
|
|
|
|
compatible = "85xx";
|
|
|
|
|
device_type = "pci";
|
|
|
|
|
reg = <8000 400>;
|
|
|
|
|
clock-frequency = <3f940aa>;
|
|
|
|
|
interrupt-map-mask = <f800 0 0 7>;
|
|
|
|
|
interrupt-map = <
|
|
|
|
|
|
|
|
|
|
/* IDSEL 0x2 */
|
|
|
|
|
1000 0 0 1 40000 31 1
|
|
|
|
|
1000 0 0 2 40000 32 1
|
|
|
|
|
1000 0 0 3 40000 33 1
|
|
|
|
|
1000 0 0 4 40000 34 1
|
|
|
|
|
|
|
|
|
|
/* IDSEL 0x3 */
|
|
|
|
|
1800 0 0 1 40000 34 1
|
|
|
|
|
1800 0 0 2 40000 31 1
|
|
|
|
|
1800 0 0 3 40000 32 1
|
|
|
|
|
1800 0 0 4 40000 33 1
|
|
|
|
|
|
|
|
|
|
/* IDSEL 0x4 */
|
|
|
|
|
2000 0 0 1 40000 33 1
|
|
|
|
|
2000 0 0 2 40000 34 1
|
|
|
|
|
2000 0 0 3 40000 31 1
|
|
|
|
|
2000 0 0 4 40000 32 1
|
|
|
|
|
|
|
|
|
|
/* IDSEL 0x5 */
|
|
|
|
|
2800 0 0 1 40000 32 1
|
|
|
|
|
2800 0 0 2 40000 33 1
|
|
|
|
|
2800 0 0 3 40000 34 1
|
|
|
|
|
2800 0 0 4 40000 31 1
|
|
|
|
|
|
|
|
|
|
/* IDSEL 12 */
|
|
|
|
|
6000 0 0 1 40000 31 1
|
|
|
|
|
6000 0 0 2 40000 32 1
|
|
|
|
|
6000 0 0 3 40000 33 1
|
|
|
|
|
6000 0 0 4 40000 34 1
|
|
|
|
|
|
|
|
|
|
/* IDSEL 13 */
|
|
|
|
|
6800 0 0 1 40000 34 1
|
|
|
|
|
6800 0 0 2 40000 31 1
|
|
|
|
|
6800 0 0 3 40000 32 1
|
|
|
|
|
6800 0 0 4 40000 33 1
|
|
|
|
|
|
|
|
|
|
/* IDSEL 14*/
|
|
|
|
|
7000 0 0 1 40000 33 1
|
|
|
|
|
7000 0 0 2 40000 34 1
|
|
|
|
|
7000 0 0 3 40000 31 1
|
|
|
|
|
7000 0 0 4 40000 32 1
|
|
|
|
|
|
|
|
|
|
/* IDSEL 15 */
|
|
|
|
|
7800 0 0 1 40000 32 1
|
|
|
|
|
7800 0 0 2 40000 33 1
|
|
|
|
|
7800 0 0 3 40000 34 1
|
|
|
|
|
7800 0 0 4 40000 31 1
|
|
|
|
|
|
|
|
|
|
/* IDSEL 18 */
|
|
|
|
|
9000 0 0 1 40000 31 1
|
|
|
|
|
9000 0 0 2 40000 32 1
|
|
|
|
|
9000 0 0 3 40000 33 1
|
|
|
|
|
9000 0 0 4 40000 34 1
|
|
|
|
|
|
|
|
|
|
/* IDSEL 19 */
|
|
|
|
|
9800 0 0 1 40000 34 1
|
|
|
|
|
9800 0 0 2 40000 31 1
|
|
|
|
|
9800 0 0 3 40000 32 1
|
|
|
|
|
9800 0 0 4 40000 33 1
|
|
|
|
|
|
|
|
|
|
/* IDSEL 20 */
|
|
|
|
|
a000 0 0 1 40000 33 1
|
|
|
|
|
a000 0 0 2 40000 34 1
|
|
|
|
|
a000 0 0 3 40000 31 1
|
|
|
|
|
a000 0 0 4 40000 32 1
|
|
|
|
|
|
|
|
|
|
/* IDSEL 21 */
|
|
|
|
|
a800 0 0 1 40000 32 1
|
|
|
|
|
a800 0 0 2 40000 33 1
|
|
|
|
|
a800 0 0 3 40000 34 1
|
|
|
|
|
a800 0 0 4 40000 31 1>;
|
|
|
|
|
|
|
|
|
|
interrupt-parent = <40000>;
|
2007-01-31 02:08:54 +03:00
|
|
|
interrupts = <8 0>;
|
2006-09-21 22:31:26 +04:00
|
|
|
bus-range = <0 0>;
|
|
|
|
|
ranges = <02000000 0 80000000 80000000 0 20000000
|
|
|
|
|
01000000 0 00000000 e2000000 0 01000000>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
pic@40000 {
|
|
|
|
|
linux,phandle = <40000>;
|
|
|
|
|
interrupt-controller;
|
|
|
|
|
#address-cells = <0>;
|
|
|
|
|
#interrupt-cells = <2>;
|
|
|
|
|
reg = <40000 20100>;
|
|
|
|
|
built-in;
|
|
|
|
|
device_type = "open-pic";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
cpm@e0000000 {
|
|
|
|
|
linux,phandle = <e0000000>;
|
|
|
|
|
#address-cells = <1>;
|
|
|
|
|
#size-cells = <1>;
|
|
|
|
|
#interrupt-cells = <2>;
|
|
|
|
|
device_type = "cpm";
|
|
|
|
|
model = "CPM2";
|
|
|
|
|
ranges = <0 0 c0000>;
|
|
|
|
|
reg = <80000 40000>;
|
|
|
|
|
command-proc = <919c0>;
|
|
|
|
|
brg-frequency = <9d5b340>;
|
|
|
|
|
|
|
|
|
|
pic@90c00 {
|
|
|
|
|
linux,phandle = <90c00>;
|
|
|
|
|
interrupt-controller;
|
|
|
|
|
#address-cells = <0>;
|
|
|
|
|
#interrupt-cells = <2>;
|
|
|
|
|
interrupts = <1e 0>;
|
|
|
|
|
interrupt-parent = <40000>;
|
|
|
|
|
reg = <90c00 80>;
|
|
|
|
|
built-in;
|
|
|
|
|
device_type = "cpm-pic";
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
scc@91a00 {
|
|
|
|
|
device_type = "serial";
|
|
|
|
|
compatible = "cpm_uart";
|
|
|
|
|
model = "SCC";
|
POWERPC: Bring the fs_no calculation to the relevant SoC enumeration
The fs_no mean used to be fs_enet driver driven, hence it was an
enumeration across all the possible fs_enet "users" in the SoC. Now, with
QE on the pipeline, and to make DTS descriptions more clear, fs_no features
relevant SoC part number, with additional field to describe the SoC type.
Another reason for that is now not only fs_enet is going to utilize those
stuff. There might be UART, HLDC, and even USB, so to prevent confusion and
be ready for upcoming OF_device transfer, fs_enet and cpm_uart drivers were
updated in that concern, as well as the relevant DTS.
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
2006-09-21 22:38:05 +04:00
|
|
|
device-id = <1>;
|
2006-09-21 22:31:26 +04:00
|
|
|
reg = <91a00 20 88000 100>;
|
|
|
|
|
clock-setup = <00ffffff 0>;
|
|
|
|
|
rx-clock = <1>;
|
|
|
|
|
tx-clock = <1>;
|
|
|
|
|
current-speed = <1c200>;
|
2007-01-31 02:08:54 +03:00
|
|
|
interrupts = <28 8>;
|
2006-09-21 22:31:26 +04:00
|
|
|
interrupt-parent = <90c00>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
scc@91a20 {
|
|
|
|
|
device_type = "serial";
|
|
|
|
|
compatible = "cpm_uart";
|
|
|
|
|
model = "SCC";
|
POWERPC: Bring the fs_no calculation to the relevant SoC enumeration
The fs_no mean used to be fs_enet driver driven, hence it was an
enumeration across all the possible fs_enet "users" in the SoC. Now, with
QE on the pipeline, and to make DTS descriptions more clear, fs_no features
relevant SoC part number, with additional field to describe the SoC type.
Another reason for that is now not only fs_enet is going to utilize those
stuff. There might be UART, HLDC, and even USB, so to prevent confusion and
be ready for upcoming OF_device transfer, fs_enet and cpm_uart drivers were
updated in that concern, as well as the relevant DTS.
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
2006-09-21 22:38:05 +04:00
|
|
|
device-id = <2>;
|
2006-09-21 22:31:26 +04:00
|
|
|
reg = <91a20 20 88100 100>;
|
|
|
|
|
clock-setup = <ff00ffff 90000>;
|
|
|
|
|
rx-clock = <2>;
|
|
|
|
|
tx-clock = <2>;
|
|
|
|
|
current-speed = <1c200>;
|
2007-01-31 02:08:54 +03:00
|
|
|
interrupts = <29 8>;
|
2006-09-21 22:31:26 +04:00
|
|
|
interrupt-parent = <90c00>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
fcc@91320 {
|
|
|
|
|
device_type = "network";
|
|
|
|
|
compatible = "fs_enet";
|
|
|
|
|
model = "FCC";
|
POWERPC: Bring the fs_no calculation to the relevant SoC enumeration
The fs_no mean used to be fs_enet driver driven, hence it was an
enumeration across all the possible fs_enet "users" in the SoC. Now, with
QE on the pipeline, and to make DTS descriptions more clear, fs_no features
relevant SoC part number, with additional field to describe the SoC type.
Another reason for that is now not only fs_enet is going to utilize those
stuff. There might be UART, HLDC, and even USB, so to prevent confusion and
be ready for upcoming OF_device transfer, fs_enet and cpm_uart drivers were
updated in that concern, as well as the relevant DTS.
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
2006-09-21 22:38:05 +04:00
|
|
|
device-id = <2>;
|
2006-09-21 22:31:26 +04:00
|
|
|
reg = <91320 20 88500 100 913a0 30>;
|
|
|
|
|
mac-address = [ 00 00 0C 00 02 FD ];
|
|
|
|
|
clock-setup = <ff00ffff 250000>;
|
|
|
|
|
rx-clock = <15>;
|
|
|
|
|
tx-clock = <16>;
|
2007-01-31 02:08:54 +03:00
|
|
|
interrupts = <21 8>;
|
2006-09-21 22:31:26 +04:00
|
|
|
interrupt-parent = <90c00>;
|
|
|
|
|
phy-handle = <2452002>;
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
fcc@91340 {
|
|
|
|
|
device_type = "network";
|
|
|
|
|
compatible = "fs_enet";
|
|
|
|
|
model = "FCC";
|
POWERPC: Bring the fs_no calculation to the relevant SoC enumeration
The fs_no mean used to be fs_enet driver driven, hence it was an
enumeration across all the possible fs_enet "users" in the SoC. Now, with
QE on the pipeline, and to make DTS descriptions more clear, fs_no features
relevant SoC part number, with additional field to describe the SoC type.
Another reason for that is now not only fs_enet is going to utilize those
stuff. There might be UART, HLDC, and even USB, so to prevent confusion and
be ready for upcoming OF_device transfer, fs_enet and cpm_uart drivers were
updated in that concern, as well as the relevant DTS.
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
2006-09-21 22:38:05 +04:00
|
|
|
device-id = <3>;
|
2006-09-21 22:31:26 +04:00
|
|
|
reg = <91340 20 88600 100 913d0 30>;
|
|
|
|
|
mac-address = [ 00 00 0C 00 03 FD ];
|
|
|
|
|
clock-setup = <ffff00ff 3700>;
|
|
|
|
|
rx-clock = <17>;
|
|
|
|
|
tx-clock = <18>;
|
2007-01-31 02:08:54 +03:00
|
|
|
interrupts = <22 8>;
|
2006-09-21 22:31:26 +04:00
|
|
|
interrupt-parent = <90c00>;
|
|
|
|
|
phy-handle = <2452003>;
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
|
|
|
|
};
|
