WSL2-Linux-Kernel/drivers/fpga/Kconfig

247 строки
8.0 KiB
Plaintext
Исходник Обычный вид История

# SPDX-License-Identifier: GPL-2.0-only
#
# FPGA framework configuration
#
menuconfig FPGA
tristate "FPGA Configuration Framework"
help
Say Y here if you want support for configuring FPGAs from the
kernel. The FPGA framework adds an FPGA manager class and FPGA
manager drivers.
if FPGA
config FPGA_MGR_SOCFPGA
tristate "Altera SOCFPGA FPGA Manager"
depends on ARCH_INTEL_SOCFPGA || COMPILE_TEST
help
FPGA manager driver support for Altera SOCFPGA.
config FPGA_MGR_SOCFPGA_A10
tristate "Altera SoCFPGA Arria10"
depends on ARCH_INTEL_SOCFPGA || COMPILE_TEST
select REGMAP_MMIO
help
FPGA manager driver support for Altera Arria10 SoCFPGA.
config ALTERA_PR_IP_CORE
tristate "Altera Partial Reconfiguration IP Core"
help
Core driver support for Altera Partial Reconfiguration IP component
config ALTERA_PR_IP_CORE_PLAT
tristate "Platform support of Altera Partial Reconfiguration IP Core"
depends on ALTERA_PR_IP_CORE && OF && HAS_IOMEM
help
Platform driver support for Altera Partial Reconfiguration IP
component
config FPGA_MGR_ALTERA_PS_SPI
tristate "Altera FPGA Passive Serial over SPI"
depends on SPI
select BITREVERSE
help
FPGA manager driver support for Altera Arria/Cyclone/Stratix
using the passive serial interface over SPI.
config FPGA_MGR_ALTERA_CVP
tristate "Altera CvP FPGA Manager"
depends on PCI
help
FPGA manager driver support for Arria-V, Cyclone-V, Stratix-V,
Arria 10 and Stratix10 Altera FPGAs using the CvP interface over PCIe.
config FPGA_MGR_ZYNQ_FPGA
tristate "Xilinx Zynq FPGA"
depends on ARCH_ZYNQ || COMPILE_TEST
help
FPGA manager driver support for Xilinx Zynq FPGAs.
config FPGA_MGR_STRATIX10_SOC
tristate "Intel Stratix10 SoC FPGA Manager"
depends on (ARCH_INTEL_SOCFPGA && INTEL_STRATIX10_SERVICE)
help
FPGA manager driver support for the Intel Stratix10 SoC.
config FPGA_MGR_XILINX_SPI
tristate "Xilinx Configuration over Slave Serial (SPI)"
depends on SPI
help
FPGA manager driver support for Xilinx FPGA configuration
over slave serial interface.
config FPGA_MGR_ICE40_SPI
tristate "Lattice iCE40 SPI"
depends on OF && SPI
help
FPGA manager driver support for Lattice iCE40 FPGAs over SPI.
config FPGA_MGR_MACHXO2_SPI
tristate "Lattice MachXO2 SPI"
depends on SPI
help
FPGA manager driver support for Lattice MachXO2 configuration
over slave SPI interface.
config FPGA_MGR_TS73XX
tristate "Technologic Systems TS-73xx SBC FPGA Manager"
depends on ARCH_EP93XX && MACH_TS72XX
help
FPGA manager driver support for the Altera Cyclone II FPGA
present on the TS-73xx SBC boards.
config FPGA_BRIDGE
tristate "FPGA Bridge Framework"
help
Say Y here if you want to support bridges connected between host
processors and FPGAs or between FPGAs.
config SOCFPGA_FPGA_BRIDGE
tristate "Altera SoCFPGA FPGA Bridges"
depends on ARCH_INTEL_SOCFPGA && FPGA_BRIDGE
help
Say Y to enable drivers for FPGA bridges for Altera SOCFPGA
devices.
config ALTERA_FREEZE_BRIDGE
tristate "Altera FPGA Freeze Bridge"
depends on FPGA_BRIDGE && HAS_IOMEM
help
Say Y to enable drivers for Altera FPGA Freeze bridges. A
freeze bridge is a bridge that exists in the FPGA fabric to
isolate one region of the FPGA from the busses while that
region is being reprogrammed.
config XILINX_PR_DECOUPLER
tristate "Xilinx LogiCORE PR Decoupler"
depends on FPGA_BRIDGE
depends on HAS_IOMEM
help
Say Y to enable drivers for Xilinx LogiCORE PR Decoupler
or Xilinx Dynamic Function eXchange AIX Shutdown Manager.
The PR Decoupler exists in the FPGA fabric to isolate one
region of the FPGA from the busses while that region is
being reprogrammed during partial reconfig.
The Dynamic Function eXchange AXI shutdown manager prevents
AXI traffic from passing through the bridge. The controller
safely handles AXI4MM and AXI4-Lite interfaces on a
Reconfigurable Partition when it is undergoing dynamic
reconfiguration, preventing the system deadlock that can
occur if AXI transactions are interrupted by DFX.
config FPGA_REGION
tristate "FPGA Region"
depends on FPGA_BRIDGE
help
FPGA Region common code. An FPGA Region controls an FPGA Manager
and the FPGA Bridges associated with either a reconfigurable
region of an FPGA or a whole FPGA.
config OF_FPGA_REGION
tristate "FPGA Region Device Tree Overlay Support"
depends on OF && FPGA_REGION
help
Support for loading FPGA images by applying a Device Tree
overlay.
fpga: add device feature list support Device Feature List (DFL) defines a feature list structure that creates a linked list of feature headers within the MMIO space to provide an extensible way of adding features. This patch introduces a kernel module to provide basic infrastructure to support FPGA devices which implement the Device Feature List. Usually there will be different features and their sub features linked into the DFL. This code provides common APIs for feature enumeration, it creates a container device (FPGA base region), walks through the DFLs and creates platform devices for feature devices (Currently it only supports two different feature devices, FPGA Management Engine (FME) and Port which the Accelerator Function Unit (AFU) connected to). In order to enumerate the DFLs, the common APIs required low level driver to provide necessary enumeration information (e.g. address for each device feature list for given device) and fill it to the dfl_fpga_enum_info data structure. Please refer to below description for APIs added for enumeration. Functions for enumeration information preparation: *dfl_fpga_enum_info_alloc allocate enumeration information data structure. *dfl_fpga_enum_info_add_dfl add a device feature list to dfl_fpga_enum_info data structure. *dfl_fpga_enum_info_free free dfl_fpga_enum_info data structure and related resources. Functions for feature device enumeration: *dfl_fpga_feature_devs_enumerate enumerate feature devices and return container device. *dfl_fpga_feature_devs_remove remove feature devices under given container device. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Zhang Yi <yi.z.zhang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 03:53:13 +03:00
config FPGA_DFL
tristate "FPGA Device Feature List (DFL) support"
select FPGA_BRIDGE
select FPGA_REGION
depends on HAS_IOMEM
fpga: add device feature list support Device Feature List (DFL) defines a feature list structure that creates a linked list of feature headers within the MMIO space to provide an extensible way of adding features. This patch introduces a kernel module to provide basic infrastructure to support FPGA devices which implement the Device Feature List. Usually there will be different features and their sub features linked into the DFL. This code provides common APIs for feature enumeration, it creates a container device (FPGA base region), walks through the DFLs and creates platform devices for feature devices (Currently it only supports two different feature devices, FPGA Management Engine (FME) and Port which the Accelerator Function Unit (AFU) connected to). In order to enumerate the DFLs, the common APIs required low level driver to provide necessary enumeration information (e.g. address for each device feature list for given device) and fill it to the dfl_fpga_enum_info data structure. Please refer to below description for APIs added for enumeration. Functions for enumeration information preparation: *dfl_fpga_enum_info_alloc allocate enumeration information data structure. *dfl_fpga_enum_info_add_dfl add a device feature list to dfl_fpga_enum_info data structure. *dfl_fpga_enum_info_free free dfl_fpga_enum_info data structure and related resources. Functions for feature device enumeration: *dfl_fpga_feature_devs_enumerate enumerate feature devices and return container device. *dfl_fpga_feature_devs_remove remove feature devices under given container device. Signed-off-by: Tim Whisonant <tim.whisonant@intel.com> Signed-off-by: Enno Luebbers <enno.luebbers@intel.com> Signed-off-by: Shiva Rao <shiva.rao@intel.com> Signed-off-by: Christopher Rauer <christopher.rauer@intel.com> Signed-off-by: Zhang Yi <yi.z.zhang@intel.com> Signed-off-by: Xiao Guangrong <guangrong.xiao@linux.intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Acked-by: Alan Tull <atull@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-06-30 03:53:13 +03:00
help
Device Feature List (DFL) defines a feature list structure that
creates a linked list of feature headers within the MMIO space
to provide an extensible way of adding features for FPGA.
Driver can walk through the feature headers to enumerate feature
devices (e.g. FPGA Management Engine, Port and Accelerator
Function Unit) and their private features for target FPGA devices.
Select this option to enable common support for Field-Programmable
Gate Array (FPGA) solutions which implement Device Feature List.
It provides enumeration APIs and feature device infrastructure.
config FPGA_DFL_FME
tristate "FPGA DFL FME Driver"
fpga: dfl: fme: add performance reporting support This patch adds support for performance reporting private feature for FPGA Management Engine (FME). Now it supports several different performance counters, including 'basic', 'cache', 'fabric', 'vtd' and 'vtd_sip'. It allows user to use standard linux tools to access these performance counters. e.g. List all events by "perf list" perf list | grep fme dfl_fme0/cache_read_hit/ [Kernel PMU event] dfl_fme0/cache_read_miss/ [Kernel PMU event] ... dfl_fme0/fab_mmio_read/ [Kernel PMU event] dfl_fme0/fab_mmio_write/ [Kernel PMU event] ... dfl_fme0/fab_port_mmio_read,portid=?/ [Kernel PMU event] dfl_fme0/fab_port_mmio_write,portid=?/ [Kernel PMU event] ... dfl_fme0/vtd_port_devtlb_1g_fill,portid=?/ [Kernel PMU event] dfl_fme0/vtd_port_devtlb_2m_fill,portid=?/ [Kernel PMU event] ... dfl_fme0/vtd_sip_iotlb_1g_hit/ [Kernel PMU event] dfl_fme0/vtd_sip_iotlb_1g_miss/ [Kernel PMU event] ... dfl_fme0/clock [Kernel PMU event] ... e.g. check increased counter value after run one application using "perf stat" command. perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_mmio_write/ ./test Performance counter stats for './test': 1 dfl_fme0/fab_mmio_read/ 2 dfl_fme0/fab_mmio_write/ 1.009496520 seconds time elapsed Please note that fabric counters support both fab_* and fab_port_*, but actually they are sharing one set of performance counters in hardware. If user wants to monitor overall data events on fab_* then fab_port_* can't be supported at the same time, see example below: perf stat -e dfl_fme0/fab_mmio_read/,dfl_fme0/fab_port_mmio_write,portid=0/ Performance counter stats for 'system wide': 0 dfl_fme0/fab_mmio_read/ <not supported> dfl_fme0/fab_port_mmio_write,portid=0/ 2.141064085 seconds time elapsed Signed-off-by: Luwei Kang <luwei.kang@intel.com> Signed-off-by: Xu Yilun <yilun.xu@intel.com> Signed-off-by: Wu Hao <hao.wu@intel.com> Link: https://lore.kernel.org/r/1587949583-12058-3-git-send-email-hao.wu@intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-27 04:06:23 +03:00
depends on FPGA_DFL && HWMON && PERF_EVENTS
help
The FPGA Management Engine (FME) is a feature device implemented
under Device Feature List (DFL) framework. Select this option to
enable the platform device driver for FME which implements all
FPGA platform level management features. There shall be one FME
per DFL based FPGA device.
config FPGA_DFL_FME_MGR
tristate "FPGA DFL FME Manager Driver"
depends on FPGA_DFL_FME && HAS_IOMEM
help
Say Y to enable FPGA Manager driver for FPGA Management Engine.
config FPGA_DFL_FME_BRIDGE
tristate "FPGA DFL FME Bridge Driver"
depends on FPGA_DFL_FME && HAS_IOMEM
help
Say Y to enable FPGA Bridge driver for FPGA Management Engine.
config FPGA_DFL_FME_REGION
tristate "FPGA DFL FME Region Driver"
depends on FPGA_DFL_FME && HAS_IOMEM
help
Say Y to enable FPGA Region driver for FPGA Management Engine.
config FPGA_DFL_AFU
tristate "FPGA DFL AFU Driver"
depends on FPGA_DFL
help
This is the driver for FPGA Accelerated Function Unit (AFU) which
implements AFU and Port management features. A User AFU connects
to the FPGA infrastructure via a Port. There may be more than one
Port/AFU per DFL based FPGA device.
config FPGA_DFL_NIOS_INTEL_PAC_N3000
tristate "FPGA DFL NIOS Driver for Intel PAC N3000"
depends on FPGA_DFL
select REGMAP
help
This is the driver for the N3000 Nios private feature on Intel
PAC (Programmable Acceleration Card) N3000. It communicates
with the embedded Nios processor to configure the retimers on
the card. It also instantiates the SPI master (spi-altera) for
the card's BMC (Board Management Controller).
config FPGA_DFL_PCI
tristate "FPGA DFL PCIe Device Driver"
depends on PCI && FPGA_DFL
help
Select this option to enable PCIe driver for PCIe-based
Field-Programmable Gate Array (FPGA) solutions which implement
the Device Feature List (DFL). This driver provides interfaces
for userspace applications to configure, enumerate, open and access
FPGA accelerators on the FPGA DFL devices, enables system level
management functions such as FPGA partial reconfiguration, power
management and virtualization with DFL framework and DFL feature
device drivers.
To compile this as a module, choose M here.
config FPGA_MGR_ZYNQMP_FPGA
tristate "Xilinx ZynqMP FPGA"
depends on ZYNQMP_FIRMWARE || (!ZYNQMP_FIRMWARE && COMPILE_TEST)
help
FPGA manager driver support for Xilinx ZynqMP FPGAs.
This driver uses the processor configuration port(PCAP)
to configure the programmable logic(PL) through PS
on ZynqMP SoC.
config FPGA_MGR_VERSAL_FPGA
tristate "Xilinx Versal FPGA"
depends on ARCH_ZYNQMP || COMPILE_TEST
help
Select this option to enable FPGA manager driver support for
Xilinx Versal SoC. This driver uses the firmware interface to
configure the programmable logic(PL).
To compile this as a module, choose M here.
endif # FPGA