WSL2-Linux-Kernel/arch/sparc/kernel/pci.c

1134 строки
28 KiB
C
Исходник Обычный вид История

/* pci.c: UltraSparc PCI controller support.
*
* Copyright (C) 1997, 1998, 1999 David S. Miller (davem@redhat.com)
* Copyright (C) 1998, 1999 Eddie C. Dost (ecd@skynet.be)
* Copyright (C) 1999 Jakub Jelinek (jj@ultra.linux.cz)
*
* OF tree based PCI bus probing taken from the PowerPC port
* with minor modifications, see there for credits.
*/
#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/sched.h>
#include <linux/capability.h>
#include <linux/errno.h>
#include <linux/pci.h>
#include <linux/msi.h>
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <asm/uaccess.h>
#include <asm/pgtable.h>
#include <asm/irq.h>
#include <asm/prom.h>
#include <asm/apb.h>
#include "pci_impl.h"
#include "kernel.h"
/* List of all PCI controllers found in the system. */
struct pci_pbm_info *pci_pbm_root = NULL;
/* Each PBM found gets a unique index. */
int pci_num_pbms = 0;
volatile int pci_poke_in_progress;
volatile int pci_poke_cpu = -1;
volatile int pci_poke_faulted;
static DEFINE_SPINLOCK(pci_poke_lock);
void pci_config_read8(u8 *addr, u8 *ret)
{
unsigned long flags;
u8 byte;
spin_lock_irqsave(&pci_poke_lock, flags);
pci_poke_cpu = smp_processor_id();
pci_poke_in_progress = 1;
pci_poke_faulted = 0;
__asm__ __volatile__("membar #Sync\n\t"
"lduba [%1] %2, %0\n\t"
"membar #Sync"
: "=r" (byte)
: "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
: "memory");
pci_poke_in_progress = 0;
pci_poke_cpu = -1;
if (!pci_poke_faulted)
*ret = byte;
spin_unlock_irqrestore(&pci_poke_lock, flags);
}
void pci_config_read16(u16 *addr, u16 *ret)
{
unsigned long flags;
u16 word;
spin_lock_irqsave(&pci_poke_lock, flags);
pci_poke_cpu = smp_processor_id();
pci_poke_in_progress = 1;
pci_poke_faulted = 0;
__asm__ __volatile__("membar #Sync\n\t"
"lduha [%1] %2, %0\n\t"
"membar #Sync"
: "=r" (word)
: "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
: "memory");
pci_poke_in_progress = 0;
pci_poke_cpu = -1;
if (!pci_poke_faulted)
*ret = word;
spin_unlock_irqrestore(&pci_poke_lock, flags);
}
void pci_config_read32(u32 *addr, u32 *ret)
{
unsigned long flags;
u32 dword;
spin_lock_irqsave(&pci_poke_lock, flags);
pci_poke_cpu = smp_processor_id();
pci_poke_in_progress = 1;
pci_poke_faulted = 0;
__asm__ __volatile__("membar #Sync\n\t"
"lduwa [%1] %2, %0\n\t"
"membar #Sync"
: "=r" (dword)
: "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
: "memory");
pci_poke_in_progress = 0;
pci_poke_cpu = -1;
if (!pci_poke_faulted)
*ret = dword;
spin_unlock_irqrestore(&pci_poke_lock, flags);
}
void pci_config_write8(u8 *addr, u8 val)
{
unsigned long flags;
spin_lock_irqsave(&pci_poke_lock, flags);
pci_poke_cpu = smp_processor_id();
pci_poke_in_progress = 1;
pci_poke_faulted = 0;
__asm__ __volatile__("membar #Sync\n\t"
"stba %0, [%1] %2\n\t"
"membar #Sync"
: /* no outputs */
: "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
: "memory");
pci_poke_in_progress = 0;
pci_poke_cpu = -1;
spin_unlock_irqrestore(&pci_poke_lock, flags);
}
void pci_config_write16(u16 *addr, u16 val)
{
unsigned long flags;
spin_lock_irqsave(&pci_poke_lock, flags);
pci_poke_cpu = smp_processor_id();
pci_poke_in_progress = 1;
pci_poke_faulted = 0;
__asm__ __volatile__("membar #Sync\n\t"
"stha %0, [%1] %2\n\t"
"membar #Sync"
: /* no outputs */
: "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
: "memory");
pci_poke_in_progress = 0;
pci_poke_cpu = -1;
spin_unlock_irqrestore(&pci_poke_lock, flags);
}
void pci_config_write32(u32 *addr, u32 val)
{
unsigned long flags;
spin_lock_irqsave(&pci_poke_lock, flags);
pci_poke_cpu = smp_processor_id();
pci_poke_in_progress = 1;
pci_poke_faulted = 0;
__asm__ __volatile__("membar #Sync\n\t"
"stwa %0, [%1] %2\n\t"
"membar #Sync"
: /* no outputs */
: "r" (val), "r" (addr), "i" (ASI_PHYS_BYPASS_EC_E_L)
: "memory");
pci_poke_in_progress = 0;
pci_poke_cpu = -1;
spin_unlock_irqrestore(&pci_poke_lock, flags);
}
static int ofpci_verbose;
static int __init ofpci_debug(char *str)
{
int val = 0;
get_option(&str, &val);
if (val)
ofpci_verbose = 1;
return 1;
}
__setup("ofpci_debug=", ofpci_debug);
static unsigned long pci_parse_of_flags(u32 addr0)
{
unsigned long flags = 0;
if (addr0 & 0x02000000) {
flags = IORESOURCE_MEM | PCI_BASE_ADDRESS_SPACE_MEMORY;
flags |= (addr0 >> 28) & PCI_BASE_ADDRESS_MEM_TYPE_1M;
sparc/PCI: Add mem64 resource parsing for root bus David reported that a T5-8 sparc system failed to boot with: pci_sun4v f02dbcfc: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x804000000000-0x80400fffffff] (bus address [0x0000-0xfffffff]) pci_bus 0000:00: root bus resource [mem 0x800000000000-0x80007effffff] (bus address [0x00000000-0x7effffff]) pci 0000:00:01.0: can't claim BAR 15 [mem 0x100000000-0x4afffffff pref]: no compatible bridge window Note that we don't know about a host bridge aperture that contains BAR 15. OF does report a MEM64 aperture, but before this patch, pci_determine_mem_io_space() ignored it. Add support for host bridge apertures with 64-bit PCI addresses. Also set IORESOURCE_MEM_64 for PCI device and bridge resources in PCI 64-bit memory space. Sparc doesn't actually print the device and bridge resources, but after this patch, we should have the equivalent of this: pci_sun4v f02dbcfc: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x804000000000-0x80400fffffff] (bus address [0x0000-0xfffffff]) pci_bus 0000:00: root bus resource [mem 0x800000000000-0x80007effffff] (bus address [0x00000000-0x7effffff]) pci_bus 0000:00: root bus resource [mem 0x800100000000-0x8007ffffffff] (bus address [0x100000000-0x7ffffffff]) pci 0000:00:01.0: bridge window [mem 0x800100000000-0x8004afffffff 64bit pref] [bhelgaas: changelog, URL to David's report] Fixes: d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") Link: http://lkml.kernel.org/r/5514391F.2030300@oracle.com Reported-by: David Ahern <david.ahern@oracle.com> Tested-by: David Ahern <david.ahern@oracle.com> Tested-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-20 19:36:53 +03:00
if (addr0 & 0x01000000)
flags |= IORESOURCE_MEM_64
| PCI_BASE_ADDRESS_MEM_TYPE_64;
if (addr0 & 0x40000000)
flags |= IORESOURCE_PREFETCH
| PCI_BASE_ADDRESS_MEM_PREFETCH;
} else if (addr0 & 0x01000000)
flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
return flags;
}
/* The of_device layer has translated all of the assigned-address properties
* into physical address resources, we only have to figure out the register
* mapping.
*/
static void pci_parse_of_addrs(struct platform_device *op,
struct device_node *node,
struct pci_dev *dev)
{
struct resource *op_res;
const u32 *addrs;
int proplen;
addrs = of_get_property(node, "assigned-addresses", &proplen);
if (!addrs)
return;
if (ofpci_verbose)
printk(" parse addresses (%d bytes) @ %p\n",
proplen, addrs);
op_res = &op->resource[0];
for (; proplen >= 20; proplen -= 20, addrs += 5, op_res++) {
struct resource *res;
unsigned long flags;
int i;
flags = pci_parse_of_flags(addrs[0]);
if (!flags)
continue;
i = addrs[0] & 0xff;
if (ofpci_verbose)
printk(" start: %llx, end: %llx, i: %x\n",
op_res->start, op_res->end, i);
if (PCI_BASE_ADDRESS_0 <= i && i <= PCI_BASE_ADDRESS_5) {
res = &dev->resource[(i - PCI_BASE_ADDRESS_0) >> 2];
} else if (i == dev->rom_base_reg) {
res = &dev->resource[PCI_ROM_RESOURCE];
flags |= IORESOURCE_READONLY | IORESOURCE_SIZEALIGN;
} else {
printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
continue;
}
res->start = op_res->start;
res->end = op_res->end;
res->flags = flags;
res->name = pci_name(dev);
}
}
static struct pci_dev *of_create_pci_dev(struct pci_pbm_info *pbm,
struct device_node *node,
struct pci_bus *bus, int devfn)
{
struct dev_archdata *sd;
struct platform_device *op;
struct pci_dev *dev;
const char *type;
u32 class;
dev = pci_alloc_dev(bus);
if (!dev)
return NULL;
sd = &dev->dev.archdata;
sd->iommu = pbm->iommu;
sd->stc = &pbm->stc;
sd->host_controller = pbm;
sd->op = op = of_find_device_by_node(node);
sd->numa_node = pbm->numa_node;
sd = &op->dev.archdata;
sd->iommu = pbm->iommu;
sd->stc = &pbm->stc;
sd->numa_node = pbm->numa_node;
if (!strcmp(node->name, "ebus"))
of_propagate_archdata(op);
type = of_get_property(node, "device_type", NULL);
if (type == NULL)
type = "";
if (ofpci_verbose)
printk(" create device, devfn: %x, type: %s\n",
devfn, type);
dev->sysdata = node;
dev->dev.parent = bus->bridge;
dev->dev.bus = &pci_bus_type;
dev->dev.of_node = of_node_get(node);
dev->devfn = devfn;
dev->multifunction = 0; /* maybe a lie? */
set_pcie_port_type(dev);
pci_dev_assign_slot(dev);
dev->vendor = of_getintprop_default(node, "vendor-id", 0xffff);
dev->device = of_getintprop_default(node, "device-id", 0xffff);
dev->subsystem_vendor =
of_getintprop_default(node, "subsystem-vendor-id", 0);
dev->subsystem_device =
of_getintprop_default(node, "subsystem-id", 0);
dev->cfg_size = pci_cfg_space_size(dev);
/* We can't actually use the firmware value, we have
* to read what is in the register right now. One
* reason is that in the case of IDE interfaces the
* firmware can sample the value before the the IDE
* interface is programmed into native mode.
*/
pci_read_config_dword(dev, PCI_CLASS_REVISION, &class);
dev->class = class >> 8;
dev->revision = class & 0xff;
dev_set_name(&dev->dev, "%04x:%02x:%02x.%d", pci_domain_nr(bus),
dev->bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn));
if (ofpci_verbose)
printk(" class: 0x%x device name: %s\n",
dev->class, pci_name(dev));
/* I have seen IDE devices which will not respond to
* the bmdma simplex check reads if bus mastering is
* disabled.
*/
if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)
pci_set_master(dev);
dev->current_state = PCI_UNKNOWN; /* unknown power state */
dev->error_state = pci_channel_io_normal;
dev->dma_mask = 0xffffffff;
if (!strcmp(node->name, "pci")) {
/* a PCI-PCI bridge */
dev->hdr_type = PCI_HEADER_TYPE_BRIDGE;
dev->rom_base_reg = PCI_ROM_ADDRESS1;
} else if (!strcmp(type, "cardbus")) {
dev->hdr_type = PCI_HEADER_TYPE_CARDBUS;
} else {
dev->hdr_type = PCI_HEADER_TYPE_NORMAL;
dev->rom_base_reg = PCI_ROM_ADDRESS;
dev->irq = sd->op->archdata.irqs[0];
if (dev->irq == 0xffffffff)
dev->irq = PCI_IRQ_NONE;
}
pci_parse_of_addrs(sd->op, node, dev);
if (ofpci_verbose)
printk(" adding to system ...\n");
pci_device_add(dev, bus);
return dev;
}
static void apb_calc_first_last(u8 map, u32 *first_p, u32 *last_p)
{
u32 idx, first, last;
first = 8;
last = 0;
for (idx = 0; idx < 8; idx++) {
if ((map & (1 << idx)) != 0) {
if (first > idx)
first = idx;
if (last < idx)
last = idx;
}
}
*first_p = first;
*last_p = last;
}
/* Cook up fake bus resources for SUNW,simba PCI bridges which lack
* a proper 'ranges' property.
*/
static void apb_fake_ranges(struct pci_dev *dev,
struct pci_bus *bus,
struct pci_pbm_info *pbm)
{
struct pci_bus_region region;
struct resource *res;
u32 first, last;
u8 map;
pci_read_config_byte(dev, APB_IO_ADDRESS_MAP, &map);
apb_calc_first_last(map, &first, &last);
res = bus->resource[0];
res->flags = IORESOURCE_IO;
region.start = (first << 21);
region.end = (last << 21) + ((1 << 21) - 1);
pcibios_bus_to_resource(dev->bus, res, &region);
pci_read_config_byte(dev, APB_MEM_ADDRESS_MAP, &map);
apb_calc_first_last(map, &first, &last);
res = bus->resource[1];
res->flags = IORESOURCE_MEM;
region.start = (first << 29);
region.end = (last << 29) + ((1 << 29) - 1);
pcibios_bus_to_resource(dev->bus, res, &region);
}
static void pci_of_scan_bus(struct pci_pbm_info *pbm,
struct device_node *node,
struct pci_bus *bus);
#define GET_64BIT(prop, i) ((((u64) (prop)[(i)]) << 32) | (prop)[(i)+1])
static void of_scan_pci_bridge(struct pci_pbm_info *pbm,
struct device_node *node,
struct pci_dev *dev)
{
struct pci_bus *bus;
const u32 *busrange, *ranges;
int len, i, simba;
struct pci_bus_region region;
struct resource *res;
unsigned int flags;
u64 size;
if (ofpci_verbose)
printk("of_scan_pci_bridge(%s)\n", node->full_name);
/* parse bus-range property */
busrange = of_get_property(node, "bus-range", &len);
if (busrange == NULL || len != 8) {
printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %s\n",
node->full_name);
return;
}
if (ofpci_verbose)
printk(" Bridge bus range [%u --> %u]\n",
busrange[0], busrange[1]);
ranges = of_get_property(node, "ranges", &len);
simba = 0;
if (ranges == NULL) {
const char *model = of_get_property(node, "model", NULL);
if (model && !strcmp(model, "SUNW,simba"))
simba = 1;
}
bus = pci_add_new_bus(dev->bus, dev, busrange[0]);
if (!bus) {
printk(KERN_ERR "Failed to create pci bus for %s\n",
node->full_name);
return;
}
bus->primary = dev->bus->number;
pci_bus_insert_busn_res(bus, busrange[0], busrange[1]);
bus->bridge_ctl = 0;
if (ofpci_verbose)
printk(" Bridge ranges[%p] simba[%d]\n",
ranges, simba);
/* parse ranges property, or cook one up by hand for Simba */
/* PCI #address-cells == 3 and #size-cells == 2 always */
res = &dev->resource[PCI_BRIDGE_RESOURCES];
for (i = 0; i < PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES; ++i) {
res->flags = 0;
bus->resource[i] = res;
++res;
}
if (simba) {
apb_fake_ranges(dev, bus, pbm);
goto after_ranges;
} else if (ranges == NULL) {
pci_read_bridge_bases(bus);
goto after_ranges;
}
i = 1;
for (; len >= 32; len -= 32, ranges += 8) {
u64 start;
if (ofpci_verbose)
printk(" RAW Range[%08x:%08x:%08x:%08x:%08x:%08x:"
"%08x:%08x]\n",
ranges[0], ranges[1], ranges[2], ranges[3],
ranges[4], ranges[5], ranges[6], ranges[7]);
flags = pci_parse_of_flags(ranges[0]);
size = GET_64BIT(ranges, 6);
if (flags == 0 || size == 0)
continue;
/* On PCI-Express systems, PCI bridges that have no devices downstream
* have a bogus size value where the first 32-bit cell is 0xffffffff.
* This results in a bogus range where start + size overflows.
*
* Just skip these otherwise the kernel will complain when the resource
* tries to be claimed.
*/
if (size >> 32 == 0xffffffff)
continue;
if (flags & IORESOURCE_IO) {
res = bus->resource[0];
if (res->flags) {
printk(KERN_ERR "PCI: ignoring extra I/O range"
" for bridge %s\n", node->full_name);
continue;
}
} else {
if (i >= PCI_NUM_RESOURCES - PCI_BRIDGE_RESOURCES) {
printk(KERN_ERR "PCI: too many memory ranges"
" for bridge %s\n", node->full_name);
continue;
}
res = bus->resource[i];
++i;
}
res->flags = flags;
region.start = start = GET_64BIT(ranges, 1);
region.end = region.start + size - 1;
if (ofpci_verbose)
printk(" Using flags[%08x] start[%016llx] size[%016llx]\n",
flags, start, size);
pcibios_bus_to_resource(dev->bus, res, &region);
}
after_ranges:
sprintf(bus->name, "PCI Bus %04x:%02x", pci_domain_nr(bus),
bus->number);
if (ofpci_verbose)
printk(" bus name: %s\n", bus->name);
pci_of_scan_bus(pbm, node, bus);
}
static void pci_of_scan_bus(struct pci_pbm_info *pbm,
struct device_node *node,
struct pci_bus *bus)
{
struct device_node *child;
const u32 *reg;
int reglen, devfn, prev_devfn;
struct pci_dev *dev;
if (ofpci_verbose)
printk("PCI: scan_bus[%s] bus no %d\n",
node->full_name, bus->number);
child = NULL;
prev_devfn = -1;
while ((child = of_get_next_child(node, child)) != NULL) {
if (ofpci_verbose)
printk(" * %s\n", child->full_name);
reg = of_get_property(child, "reg", &reglen);
if (reg == NULL || reglen < 20)
continue;
devfn = (reg[0] >> 8) & 0xff;
/* This is a workaround for some device trees
* which list PCI devices twice. On the V100
* for example, device number 3 is listed twice.
* Once as "pm" and once again as "lomp".
*/
if (devfn == prev_devfn)
continue;
prev_devfn = devfn;
/* create a new pci_dev for this device */
dev = of_create_pci_dev(pbm, child, bus, devfn);
if (!dev)
continue;
if (ofpci_verbose)
printk("PCI: dev header type: %x\n",
dev->hdr_type);
if (pci_is_bridge(dev))
of_scan_pci_bridge(pbm, child, dev);
}
}
static ssize_t
show_pciobppath_attr(struct device * dev, struct device_attribute * attr, char * buf)
{
struct pci_dev *pdev;
struct device_node *dp;
pdev = to_pci_dev(dev);
dp = pdev->dev.of_node;
return snprintf (buf, PAGE_SIZE, "%s\n", dp->full_name);
}
static DEVICE_ATTR(obppath, S_IRUSR | S_IRGRP | S_IROTH, show_pciobppath_attr, NULL);
static void pci_bus_register_of_sysfs(struct pci_bus *bus)
{
struct pci_dev *dev;
struct pci_bus *child_bus;
int err;
list_for_each_entry(dev, &bus->devices, bus_list) {
/* we don't really care if we can create this file or
* not, but we need to assign the result of the call
* or the world will fall under alien invasion and
* everybody will be frozen on a spaceship ready to be
* eaten on alpha centauri by some green and jelly
* humanoid.
*/
err = sysfs_create_file(&dev->dev.kobj, &dev_attr_obppath.attr);
(void) err;
}
list_for_each_entry(child_bus, &bus->children, node)
pci_bus_register_of_sysfs(child_bus);
}
static void pci_claim_bus_resources(struct pci_bus *bus)
{
struct pci_bus *child_bus;
struct pci_dev *dev;
list_for_each_entry(dev, &bus->devices, bus_list) {
int i;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *r = &dev->resource[i];
if (r->parent || !r->start || !r->flags)
continue;
if (ofpci_verbose)
printk("PCI: Claiming %s: "
"Resource %d: %016llx..%016llx [%x]\n",
pci_name(dev), i,
(unsigned long long)r->start,
(unsigned long long)r->end,
(unsigned int)r->flags);
pci_claim_resource(dev, i);
}
}
list_for_each_entry(child_bus, &bus->children, node)
pci_claim_bus_resources(child_bus);
}
struct pci_bus *pci_scan_one_pbm(struct pci_pbm_info *pbm,
struct device *parent)
{
LIST_HEAD(resources);
struct device_node *node = pbm->op->dev.of_node;
struct pci_bus *bus;
printk("PCI: Scanning PBM %s\n", node->full_name);
pci_add_resource_offset(&resources, &pbm->io_space,
pbm->io_space.start);
pci_add_resource_offset(&resources, &pbm->mem_space,
pbm->mem_space.start);
sparc/PCI: Add mem64 resource parsing for root bus David reported that a T5-8 sparc system failed to boot with: pci_sun4v f02dbcfc: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x804000000000-0x80400fffffff] (bus address [0x0000-0xfffffff]) pci_bus 0000:00: root bus resource [mem 0x800000000000-0x80007effffff] (bus address [0x00000000-0x7effffff]) pci 0000:00:01.0: can't claim BAR 15 [mem 0x100000000-0x4afffffff pref]: no compatible bridge window Note that we don't know about a host bridge aperture that contains BAR 15. OF does report a MEM64 aperture, but before this patch, pci_determine_mem_io_space() ignored it. Add support for host bridge apertures with 64-bit PCI addresses. Also set IORESOURCE_MEM_64 for PCI device and bridge resources in PCI 64-bit memory space. Sparc doesn't actually print the device and bridge resources, but after this patch, we should have the equivalent of this: pci_sun4v f02dbcfc: PCI host bridge to bus 0000:00 pci_bus 0000:00: root bus resource [io 0x804000000000-0x80400fffffff] (bus address [0x0000-0xfffffff]) pci_bus 0000:00: root bus resource [mem 0x800000000000-0x80007effffff] (bus address [0x00000000-0x7effffff]) pci_bus 0000:00: root bus resource [mem 0x800100000000-0x8007ffffffff] (bus address [0x100000000-0x7ffffffff]) pci 0000:00:01.0: bridge window [mem 0x800100000000-0x8004afffffff 64bit pref] [bhelgaas: changelog, URL to David's report] Fixes: d63e2e1f3df9 ("sparc/PCI: Clip bridge windows to fit in upstream windows") Link: http://lkml.kernel.org/r/5514391F.2030300@oracle.com Reported-by: David Ahern <david.ahern@oracle.com> Tested-by: David Ahern <david.ahern@oracle.com> Tested-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2015-10-20 19:36:53 +03:00
if (pbm->mem64_space.flags)
pci_add_resource_offset(&resources, &pbm->mem64_space,
pbm->mem_space.start);
pbm->busn.start = pbm->pci_first_busno;
pbm->busn.end = pbm->pci_last_busno;
pbm->busn.flags = IORESOURCE_BUS;
pci_add_resource(&resources, &pbm->busn);
bus = pci_create_root_bus(parent, pbm->pci_first_busno, pbm->pci_ops,
pbm, &resources);
if (!bus) {
printk(KERN_ERR "Failed to create bus for %s\n",
node->full_name);
pci_free_resource_list(&resources);
return NULL;
}
pci_of_scan_bus(pbm, node, bus);
pci_bus_register_of_sysfs(bus);
pci_claim_bus_resources(bus);
pci_bus_add_devices(bus);
return bus;
}
void pcibios_fixup_bus(struct pci_bus *pbus)
{
}
resource_size_t pcibios_align_resource(void *data, const struct resource *res,
resource_size_t size, resource_size_t align)
{
return res->start;
}
int pcibios_enable_device(struct pci_dev *dev, int mask)
{
u16 cmd, oldcmd;
int i;
pci_read_config_word(dev, PCI_COMMAND, &cmd);
oldcmd = cmd;
for (i = 0; i < PCI_NUM_RESOURCES; i++) {
struct resource *res = &dev->resource[i];
/* Only set up the requested stuff */
if (!(mask & (1<<i)))
continue;
if (res->flags & IORESOURCE_IO)
cmd |= PCI_COMMAND_IO;
if (res->flags & IORESOURCE_MEM)
cmd |= PCI_COMMAND_MEMORY;
}
if (cmd != oldcmd) {
printk(KERN_DEBUG "PCI: Enabling device: (%s), cmd %x\n",
pci_name(dev), cmd);
/* Enable the appropriate bits in the PCI command register. */
pci_write_config_word(dev, PCI_COMMAND, cmd);
}
return 0;
}
/* Platform support for /proc/bus/pci/X/Y mmap()s. */
/* If the user uses a host-bridge as the PCI device, he may use
* this to perform a raw mmap() of the I/O or MEM space behind
* that controller.
*
* This can be useful for execution of x86 PCI bios initialization code
* on a PCI card, like the xfree86 int10 stuff does.
*/
static int __pci_mmap_make_offset_bus(struct pci_dev *pdev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state)
{
struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
unsigned long space_size, user_offset, user_size;
if (mmap_state == pci_mmap_io) {
space_size = resource_size(&pbm->io_space);
} else {
space_size = resource_size(&pbm->mem_space);
}
/* Make sure the request is in range. */
user_offset = vma->vm_pgoff << PAGE_SHIFT;
user_size = vma->vm_end - vma->vm_start;
if (user_offset >= space_size ||
(user_offset + user_size) > space_size)
return -EINVAL;
if (mmap_state == pci_mmap_io) {
vma->vm_pgoff = (pbm->io_space.start +
user_offset) >> PAGE_SHIFT;
} else {
vma->vm_pgoff = (pbm->mem_space.start +
user_offset) >> PAGE_SHIFT;
}
return 0;
}
/* Adjust vm_pgoff of VMA such that it is the physical page offset
* corresponding to the 32-bit pci bus offset for DEV requested by the user.
*
* Basically, the user finds the base address for his device which he wishes
* to mmap. They read the 32-bit value from the config space base register,
* add whatever PAGE_SIZE multiple offset they wish, and feed this into the
* offset parameter of mmap on /proc/bus/pci/XXX for that device.
*
* Returns negative error code on failure, zero on success.
*/
static int __pci_mmap_make_offset(struct pci_dev *pdev,
struct vm_area_struct *vma,
enum pci_mmap_state mmap_state)
{
unsigned long user_paddr, user_size;
int i, err;
/* First compute the physical address in vma->vm_pgoff,
* making sure the user offset is within range in the
* appropriate PCI space.
*/
err = __pci_mmap_make_offset_bus(pdev, vma, mmap_state);
if (err)
return err;
/* If this is a mapping on a host bridge, any address
* is OK.
*/
if ((pdev->class >> 8) == PCI_CLASS_BRIDGE_HOST)
return err;
/* Otherwise make sure it's in the range for one of the
* device's resources.
*/
user_paddr = vma->vm_pgoff << PAGE_SHIFT;
user_size = vma->vm_end - vma->vm_start;
for (i = 0; i <= PCI_ROM_RESOURCE; i++) {
struct resource *rp = &pdev->resource[i];
resource_size_t aligned_end;
/* Active? */
if (!rp->flags)
continue;
/* Same type? */
if (i == PCI_ROM_RESOURCE) {
if (mmap_state != pci_mmap_mem)
continue;
} else {
if ((mmap_state == pci_mmap_io &&
(rp->flags & IORESOURCE_IO) == 0) ||
(mmap_state == pci_mmap_mem &&
(rp->flags & IORESOURCE_MEM) == 0))
continue;
}
/* Align the resource end to the next page address.
* PAGE_SIZE intentionally added instead of (PAGE_SIZE - 1),
* because actually we need the address of the next byte
* after rp->end.
*/
aligned_end = (rp->end + PAGE_SIZE) & PAGE_MASK;
if ((rp->start <= user_paddr) &&
(user_paddr + user_size) <= aligned_end)
break;
}
if (i > PCI_ROM_RESOURCE)
return -EINVAL;
return 0;
}
/* Set vm_page_prot of VMA, as appropriate for this architecture, for a pci
* device mapping.
*/
static void __pci_mmap_set_pgprot(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state)
{
/* Our io_remap_pfn_range takes care of this, do nothing. */
}
/* Perform the actual remap of the pages for a PCI device mapping, as appropriate
* for this architecture. The region in the process to map is described by vm_start
* and vm_end members of VMA, the base physical address is found in vm_pgoff.
* The pci device structure is provided so that architectures may make mapping
* decisions on a per-device or per-bus basis.
*
* Returns a negative error code on failure, zero on success.
*/
int pci_mmap_page_range(struct pci_dev *dev, struct vm_area_struct *vma,
enum pci_mmap_state mmap_state,
int write_combine)
{
int ret;
ret = __pci_mmap_make_offset(dev, vma, mmap_state);
if (ret < 0)
return ret;
__pci_mmap_set_pgprot(dev, vma, mmap_state);
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
ret = io_remap_pfn_range(vma, vma->vm_start,
vma->vm_pgoff,
vma->vm_end - vma->vm_start,
vma->vm_page_prot);
if (ret)
return ret;
return 0;
}
#ifdef CONFIG_NUMA
int pcibus_to_node(struct pci_bus *pbus)
{
struct pci_pbm_info *pbm = pbus->sysdata;
return pbm->numa_node;
}
EXPORT_SYMBOL(pcibus_to_node);
#endif
/* Return the domain number for this pci bus */
int pci_domain_nr(struct pci_bus *pbus)
{
struct pci_pbm_info *pbm = pbus->sysdata;
int ret;
if (!pbm) {
ret = -ENXIO;
} else {
ret = pbm->index;
}
return ret;
}
EXPORT_SYMBOL(pci_domain_nr);
#ifdef CONFIG_PCI_MSI
int arch_setup_msi_irq(struct pci_dev *pdev, struct msi_desc *desc)
{
struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
unsigned int irq;
if (!pbm->setup_msi_irq)
return -EINVAL;
return pbm->setup_msi_irq(&irq, pdev, desc);
}
void arch_teardown_msi_irq(unsigned int irq)
{
struct msi_desc *entry = irq_get_msi_desc(irq);
struct pci_dev *pdev = msi_desc_to_pci_dev(entry);
struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
if (pbm->teardown_msi_irq)
pbm->teardown_msi_irq(irq, pdev);
}
#endif /* !(CONFIG_PCI_MSI) */
static void ali_sound_dma_hack(struct pci_dev *pdev, int set_bit)
{
struct pci_dev *ali_isa_bridge;
u8 val;
/* ALI sound chips generate 31-bits of DMA, a special register
* determines what bit 31 is emitted as.
*/
ali_isa_bridge = pci_get_device(PCI_VENDOR_ID_AL,
PCI_DEVICE_ID_AL_M1533,
NULL);
pci_read_config_byte(ali_isa_bridge, 0x7e, &val);
if (set_bit)
val |= 0x01;
else
val &= ~0x01;
pci_write_config_byte(ali_isa_bridge, 0x7e, val);
pci_dev_put(ali_isa_bridge);
}
int pci64_dma_supported(struct pci_dev *pdev, u64 device_mask)
{
u64 dma_addr_mask;
if (pdev == NULL) {
dma_addr_mask = 0xffffffff;
} else {
struct iommu *iommu = pdev->dev.archdata.iommu;
dma_addr_mask = iommu->dma_addr_mask;
if (pdev->vendor == PCI_VENDOR_ID_AL &&
pdev->device == PCI_DEVICE_ID_AL_M5451 &&
device_mask == 0x7fffffff) {
ali_sound_dma_hack(pdev,
(dma_addr_mask & 0x80000000) != 0);
return 1;
}
}
if (device_mask >= (1UL << 32UL))
return 0;
return (device_mask & dma_addr_mask) == dma_addr_mask;
}
void pci_resource_to_user(const struct pci_dev *pdev, int bar,
const struct resource *rp, resource_size_t *start,
resource_size_t *end)
{
struct pci_pbm_info *pbm = pdev->dev.archdata.host_controller;
unsigned long offset;
if (rp->flags & IORESOURCE_IO)
offset = pbm->io_space.start;
else
offset = pbm->mem_space.start;
*start = rp->start - offset;
*end = rp->end - offset;
}
void pcibios_set_master(struct pci_dev *dev)
{
/* No special bus mastering setup handling */
}
sparc/PCI: Fix for panic while enabling SR-IOV We noticed this panic while enabling SR-IOV in sparc. mlx4_core: Mellanox ConnectX core driver v2.2-1 (Jan 1 2015) mlx4_core: Initializing 0007:01:00.0 mlx4_core 0007:01:00.0: Enabling SR-IOV with 5 VFs mlx4_core: Initializing 0007:01:00.1 Unable to handle kernel NULL pointer dereference insmod(10010): Oops [#1] CPU: 391 PID: 10010 Comm: insmod Not tainted 4.1.12-32.el6uek.kdump2.sparc64 #1 TPC: <dma_supported+0x20/0x80> I7: <__mlx4_init_one+0x324/0x500 [mlx4_core]> Call Trace: [00000000104c5ea4] __mlx4_init_one+0x324/0x500 [mlx4_core] [00000000104c613c] mlx4_init_one+0xbc/0x120 [mlx4_core] [0000000000725f14] local_pci_probe+0x34/0xa0 [0000000000726028] pci_call_probe+0xa8/0xe0 [0000000000726310] pci_device_probe+0x50/0x80 [000000000079f700] really_probe+0x140/0x420 [000000000079fa24] driver_probe_device+0x44/0xa0 [000000000079fb5c] __device_attach+0x3c/0x60 [000000000079d85c] bus_for_each_drv+0x5c/0xa0 [000000000079f588] device_attach+0x88/0xc0 [000000000071acd0] pci_bus_add_device+0x30/0x80 [0000000000736090] virtfn_add.clone.1+0x210/0x360 [00000000007364a4] sriov_enable+0x2c4/0x520 [000000000073672c] pci_enable_sriov+0x2c/0x40 [00000000104c2d58] mlx4_enable_sriov+0xf8/0x180 [mlx4_core] [00000000104c49ac] mlx4_load_one+0x42c/0xd40 [mlx4_core] Disabling lock debugging due to kernel taint Caller[00000000104c5ea4]: __mlx4_init_one+0x324/0x500 [mlx4_core] Caller[00000000104c613c]: mlx4_init_one+0xbc/0x120 [mlx4_core] Caller[0000000000725f14]: local_pci_probe+0x34/0xa0 Caller[0000000000726028]: pci_call_probe+0xa8/0xe0 Caller[0000000000726310]: pci_device_probe+0x50/0x80 Caller[000000000079f700]: really_probe+0x140/0x420 Caller[000000000079fa24]: driver_probe_device+0x44/0xa0 Caller[000000000079fb5c]: __device_attach+0x3c/0x60 Caller[000000000079d85c]: bus_for_each_drv+0x5c/0xa0 Caller[000000000079f588]: device_attach+0x88/0xc0 Caller[000000000071acd0]: pci_bus_add_device+0x30/0x80 Caller[0000000000736090]: virtfn_add.clone.1+0x210/0x360 Caller[00000000007364a4]: sriov_enable+0x2c4/0x520 Caller[000000000073672c]: pci_enable_sriov+0x2c/0x40 Caller[00000000104c2d58]: mlx4_enable_sriov+0xf8/0x180 [mlx4_core] Caller[00000000104c49ac]: mlx4_load_one+0x42c/0xd40 [mlx4_core] Caller[00000000104c5f90]: __mlx4_init_one+0x410/0x500 [mlx4_core] Caller[00000000104c613c]: mlx4_init_one+0xbc/0x120 [mlx4_core] Caller[0000000000725f14]: local_pci_probe+0x34/0xa0 Caller[0000000000726028]: pci_call_probe+0xa8/0xe0 Caller[0000000000726310]: pci_device_probe+0x50/0x80 Caller[000000000079f700]: really_probe+0x140/0x420 Caller[000000000079fa24]: driver_probe_device+0x44/0xa0 Caller[000000000079fb08]: __driver_attach+0x88/0xa0 Caller[000000000079d90c]: bus_for_each_dev+0x6c/0xa0 Caller[000000000079f29c]: driver_attach+0x1c/0x40 Caller[000000000079e35c]: bus_add_driver+0x17c/0x220 Caller[00000000007a02d4]: driver_register+0x74/0x120 Caller[00000000007263fc]: __pci_register_driver+0x3c/0x60 Caller[00000000104f62bc]: mlx4_init+0x60/0xcc [mlx4_core] Kernel panic - not syncing: Fatal exception Press Stop-A (L1-A) to return to the boot prom ---[ end Kernel panic - not syncing: Fatal exception Details: Here is the call sequence virtfn_add->__mlx4_init_one->dma_set_mask->dma_supported The panic happened at line 760(file arch/sparc/kernel/iommu.c) 758 int dma_supported(struct device *dev, u64 device_mask) 759 { 760 struct iommu *iommu = dev->archdata.iommu; 761 u64 dma_addr_mask = iommu->dma_addr_mask; 762 763 if (device_mask >= (1UL << 32UL)) 764 return 0; 765 766 if ((device_mask & dma_addr_mask) == dma_addr_mask) 767 return 1; 768 769 #ifdef CONFIG_PCI 770 if (dev_is_pci(dev)) 771 return pci64_dma_supported(to_pci_dev(dev), device_mask); 772 #endif 773 774 return 0; 775 } 776 EXPORT_SYMBOL(dma_supported); Same panic happened with Intel ixgbe driver also. SR-IOV code looks for arch specific data while enabling VFs. When VF device is added, driver probe function makes set of calls to initialize the pci device. Because the VF device is added different way than the normal PF device(which happens via of_create_pci_dev for sparc), some of the arch specific initialization does not happen for VF device. That causes panic when archdata is accessed. To fix this, I have used already defined weak function pcibios_setup_device to copy archdata from PF to VF. Also verified the fix. Signed-off-by: Babu Moger <babu.moger@oracle.com> Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Reviewed-by: Ethan Zhao <ethan.zhao@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2016-03-24 23:02:22 +03:00
#ifdef CONFIG_PCI_IOV
int pcibios_add_device(struct pci_dev *dev)
{
struct pci_dev *pdev;
/* Add sriov arch specific initialization here.
* Copy dev_archdata from PF to VF
*/
if (dev->is_virtfn) {
pdev = dev->physfn;
memcpy(&dev->dev.archdata, &pdev->dev.archdata,
sizeof(struct dev_archdata));
}
return 0;
}
#endif /* CONFIG_PCI_IOV */
static int __init pcibios_init(void)
{
pci_dfl_cache_line_size = 64 >> 2;
return 0;
}
subsys_initcall(pcibios_init);
#ifdef CONFIG_SYSFS
#define SLOT_NAME_SIZE 11 /* Max decimal digits + null in u32 */
static void pcie_bus_slot_names(struct pci_bus *pbus)
{
struct pci_dev *pdev;
struct pci_bus *bus;
list_for_each_entry(pdev, &pbus->devices, bus_list) {
char name[SLOT_NAME_SIZE];
struct pci_slot *pci_slot;
const u32 *slot_num;
int len;
slot_num = of_get_property(pdev->dev.of_node,
"physical-slot#", &len);
if (slot_num == NULL || len != 4)
continue;
snprintf(name, sizeof(name), "%u", slot_num[0]);
pci_slot = pci_create_slot(pbus, slot_num[0], name, NULL);
if (IS_ERR(pci_slot))
pr_err("PCI: pci_create_slot returned %ld.\n",
PTR_ERR(pci_slot));
}
list_for_each_entry(bus, &pbus->children, node)
pcie_bus_slot_names(bus);
}
static void pci_bus_slot_names(struct device_node *node, struct pci_bus *bus)
{
const struct pci_slot_names {
u32 slot_mask;
char names[0];
} *prop;
const char *sp;
int len, i;
u32 mask;
prop = of_get_property(node, "slot-names", &len);
if (!prop)
return;
mask = prop->slot_mask;
sp = prop->names;
if (ofpci_verbose)
printk("PCI: Making slots for [%s] mask[0x%02x]\n",
node->full_name, mask);
i = 0;
while (mask) {
struct pci_slot *pci_slot;
u32 this_bit = 1 << i;
if (!(mask & this_bit)) {
i++;
continue;
}
if (ofpci_verbose)
printk("PCI: Making slot [%s]\n", sp);
pci_slot = pci_create_slot(bus, i, sp, NULL);
if (IS_ERR(pci_slot))
printk(KERN_ERR "PCI: pci_create_slot returned %ld\n",
PTR_ERR(pci_slot));
sp += strlen(sp) + 1;
mask &= ~this_bit;
i++;
}
}
static int __init of_pci_slot_init(void)
{
struct pci_bus *pbus = NULL;
while ((pbus = pci_find_next_bus(pbus)) != NULL) {
struct device_node *node;
struct pci_dev *pdev;
pdev = list_first_entry(&pbus->devices, struct pci_dev,
bus_list);
if (pdev && pci_is_pcie(pdev)) {
pcie_bus_slot_names(pbus);
} else {
if (pbus->self) {
/* PCI->PCI bridge */
node = pbus->self->dev.of_node;
} else {
struct pci_pbm_info *pbm = pbus->sysdata;
/* Host PCI controller */
node = pbm->op->dev.of_node;
}
pci_bus_slot_names(node, pbus);
}
}
return 0;
}
device_initcall(of_pci_slot_init);
#endif