virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
// SPDX-License-Identifier: GPL-2.0
|
|
|
|
/*
|
|
|
|
* virtio-fs: Virtio Filesystem
|
|
|
|
* Copyright (C) 2018 Red Hat, Inc.
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <linux/fs.h>
|
2020-08-20 01:19:46 +03:00
|
|
|
#include <linux/dax.h>
|
|
|
|
#include <linux/pci.h>
|
|
|
|
#include <linux/pfn_t.h>
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/virtio.h>
|
|
|
|
#include <linux/virtio_fs.h>
|
|
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/fs_context.h>
|
2020-08-20 01:19:47 +03:00
|
|
|
#include <linux/fs_parser.h>
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
#include <linux/highmem.h>
|
2020-08-20 01:19:46 +03:00
|
|
|
#include <linux/uio.h>
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
#include "fuse_i.h"
|
|
|
|
|
|
|
|
/* List of virtio-fs device instances and a lock for the list. Also provides
|
|
|
|
* mutual exclusion in device removal and mounting path
|
|
|
|
*/
|
|
|
|
static DEFINE_MUTEX(virtio_fs_mutex);
|
|
|
|
static LIST_HEAD(virtio_fs_instances);
|
|
|
|
|
|
|
|
enum {
|
|
|
|
VQ_HIPRIO,
|
|
|
|
VQ_REQUEST
|
|
|
|
};
|
|
|
|
|
2020-08-20 01:19:44 +03:00
|
|
|
#define VQ_NAME_LEN 24
|
|
|
|
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
/* Per-virtqueue state */
|
|
|
|
struct virtio_fs_vq {
|
|
|
|
spinlock_t lock;
|
|
|
|
struct virtqueue *vq; /* protected by ->lock */
|
|
|
|
struct work_struct done_work;
|
|
|
|
struct list_head queued_reqs;
|
2019-10-15 20:46:22 +03:00
|
|
|
struct list_head end_reqs; /* End these requests */
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
struct delayed_work dispatch_work;
|
|
|
|
struct fuse_dev *fud;
|
|
|
|
bool connected;
|
|
|
|
long in_flight;
|
2019-10-30 18:07:19 +03:00
|
|
|
struct completion in_flight_zero; /* No inflight requests */
|
2020-08-20 01:19:44 +03:00
|
|
|
char name[VQ_NAME_LEN];
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
} ____cacheline_aligned_in_smp;
|
|
|
|
|
|
|
|
/* A virtio-fs device instance */
|
|
|
|
struct virtio_fs {
|
|
|
|
struct kref refcount;
|
|
|
|
struct list_head list; /* on virtio_fs_instances */
|
|
|
|
char *tag;
|
|
|
|
struct virtio_fs_vq *vqs;
|
|
|
|
unsigned int nvqs; /* number of virtqueues */
|
|
|
|
unsigned int num_request_queues; /* number of request queues */
|
2020-08-20 01:19:46 +03:00
|
|
|
struct dax_device *dax_dev;
|
|
|
|
|
|
|
|
/* DAX memory window where file contents are mapped */
|
|
|
|
void *window_kaddr;
|
|
|
|
phys_addr_t window_phys_addr;
|
|
|
|
size_t window_len;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
};
|
|
|
|
|
2019-10-30 18:07:18 +03:00
|
|
|
struct virtio_fs_forget_req {
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
struct fuse_in_header ih;
|
|
|
|
struct fuse_forget_in arg;
|
2019-10-30 18:07:18 +03:00
|
|
|
};
|
|
|
|
|
|
|
|
struct virtio_fs_forget {
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
/* This request can be temporarily queued on virt queue */
|
|
|
|
struct list_head list;
|
2019-10-30 18:07:18 +03:00
|
|
|
struct virtio_fs_forget_req req;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
};
|
|
|
|
|
2020-04-20 18:01:34 +03:00
|
|
|
struct virtio_fs_req_work {
|
|
|
|
struct fuse_req *req;
|
|
|
|
struct virtio_fs_vq *fsvq;
|
|
|
|
struct work_struct done_work;
|
|
|
|
};
|
|
|
|
|
2019-10-15 20:46:26 +03:00
|
|
|
static int virtio_fs_enqueue_req(struct virtio_fs_vq *fsvq,
|
|
|
|
struct fuse_req *req, bool in_flight);
|
|
|
|
|
2020-08-20 01:19:47 +03:00
|
|
|
enum {
|
|
|
|
OPT_DAX,
|
|
|
|
};
|
|
|
|
|
|
|
|
static const struct fs_parameter_spec virtio_fs_parameters[] = {
|
|
|
|
fsparam_flag("dax", OPT_DAX),
|
|
|
|
{}
|
|
|
|
};
|
|
|
|
|
|
|
|
static int virtio_fs_parse_param(struct fs_context *fc,
|
|
|
|
struct fs_parameter *param)
|
|
|
|
{
|
|
|
|
struct fs_parse_result result;
|
|
|
|
struct fuse_fs_context *ctx = fc->fs_private;
|
|
|
|
int opt;
|
|
|
|
|
|
|
|
opt = fs_parse(fc, virtio_fs_parameters, param, &result);
|
|
|
|
if (opt < 0)
|
|
|
|
return opt;
|
|
|
|
|
|
|
|
switch (opt) {
|
|
|
|
case OPT_DAX:
|
|
|
|
ctx->dax = 1;
|
|
|
|
break;
|
|
|
|
default:
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_fs_free_fc(struct fs_context *fc)
|
|
|
|
{
|
|
|
|
struct fuse_fs_context *ctx = fc->fs_private;
|
|
|
|
|
|
|
|
kfree(ctx);
|
|
|
|
}
|
|
|
|
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
static inline struct virtio_fs_vq *vq_to_fsvq(struct virtqueue *vq)
|
|
|
|
{
|
|
|
|
struct virtio_fs *fs = vq->vdev->priv;
|
|
|
|
|
|
|
|
return &fs->vqs[vq->index];
|
|
|
|
}
|
|
|
|
|
|
|
|
static inline struct fuse_pqueue *vq_to_fpq(struct virtqueue *vq)
|
|
|
|
{
|
|
|
|
return &vq_to_fsvq(vq)->fud->pq;
|
|
|
|
}
|
|
|
|
|
2019-10-15 20:46:25 +03:00
|
|
|
/* Should be called with fsvq->lock held. */
|
|
|
|
static inline void inc_in_flight_req(struct virtio_fs_vq *fsvq)
|
|
|
|
{
|
|
|
|
fsvq->in_flight++;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Should be called with fsvq->lock held. */
|
|
|
|
static inline void dec_in_flight_req(struct virtio_fs_vq *fsvq)
|
|
|
|
{
|
|
|
|
WARN_ON(fsvq->in_flight <= 0);
|
|
|
|
fsvq->in_flight--;
|
2019-10-30 18:07:19 +03:00
|
|
|
if (!fsvq->in_flight)
|
|
|
|
complete(&fsvq->in_flight_zero);
|
2019-10-15 20:46:25 +03:00
|
|
|
}
|
|
|
|
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
static void release_virtio_fs_obj(struct kref *ref)
|
|
|
|
{
|
|
|
|
struct virtio_fs *vfs = container_of(ref, struct virtio_fs, refcount);
|
|
|
|
|
|
|
|
kfree(vfs->vqs);
|
|
|
|
kfree(vfs);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Make sure virtiofs_mutex is held */
|
|
|
|
static void virtio_fs_put(struct virtio_fs *fs)
|
|
|
|
{
|
|
|
|
kref_put(&fs->refcount, release_virtio_fs_obj);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_fs_fiq_release(struct fuse_iqueue *fiq)
|
|
|
|
{
|
|
|
|
struct virtio_fs *vfs = fiq->priv;
|
|
|
|
|
|
|
|
mutex_lock(&virtio_fs_mutex);
|
|
|
|
virtio_fs_put(vfs);
|
|
|
|
mutex_unlock(&virtio_fs_mutex);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_fs_drain_queue(struct virtio_fs_vq *fsvq)
|
|
|
|
{
|
|
|
|
WARN_ON(fsvq->in_flight < 0);
|
|
|
|
|
|
|
|
/* Wait for in flight requests to finish.*/
|
2019-10-30 18:07:19 +03:00
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
if (fsvq->in_flight) {
|
|
|
|
/* We are holding virtio_fs_mutex. There should not be any
|
|
|
|
* waiters waiting for completion.
|
|
|
|
*/
|
|
|
|
reinit_completion(&fsvq->in_flight_zero);
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
wait_for_completion(&fsvq->in_flight_zero);
|
|
|
|
} else {
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
flush_work(&fsvq->done_work);
|
|
|
|
flush_delayed_work(&fsvq->dispatch_work);
|
|
|
|
}
|
|
|
|
|
2019-10-30 18:07:19 +03:00
|
|
|
static void virtio_fs_drain_all_queues_locked(struct virtio_fs *fs)
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
{
|
|
|
|
struct virtio_fs_vq *fsvq;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < fs->nvqs; i++) {
|
|
|
|
fsvq = &fs->vqs[i];
|
|
|
|
virtio_fs_drain_queue(fsvq);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-10-30 18:07:19 +03:00
|
|
|
static void virtio_fs_drain_all_queues(struct virtio_fs *fs)
|
|
|
|
{
|
|
|
|
/* Provides mutual exclusion between ->remove and ->kill_sb
|
|
|
|
* paths. We don't want both of these draining queue at the
|
|
|
|
* same time. Current completion logic reinits completion
|
|
|
|
* and that means there should not be any other thread
|
|
|
|
* doing reinit or waiting for completion already.
|
|
|
|
*/
|
|
|
|
mutex_lock(&virtio_fs_mutex);
|
|
|
|
virtio_fs_drain_all_queues_locked(fs);
|
|
|
|
mutex_unlock(&virtio_fs_mutex);
|
|
|
|
}
|
|
|
|
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
static void virtio_fs_start_all_queues(struct virtio_fs *fs)
|
|
|
|
{
|
|
|
|
struct virtio_fs_vq *fsvq;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < fs->nvqs; i++) {
|
|
|
|
fsvq = &fs->vqs[i];
|
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
fsvq->connected = true;
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Add a new instance to the list or return -EEXIST if tag name exists*/
|
|
|
|
static int virtio_fs_add_instance(struct virtio_fs *fs)
|
|
|
|
{
|
|
|
|
struct virtio_fs *fs2;
|
|
|
|
bool duplicate = false;
|
|
|
|
|
|
|
|
mutex_lock(&virtio_fs_mutex);
|
|
|
|
|
|
|
|
list_for_each_entry(fs2, &virtio_fs_instances, list) {
|
|
|
|
if (strcmp(fs->tag, fs2->tag) == 0)
|
|
|
|
duplicate = true;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!duplicate)
|
|
|
|
list_add_tail(&fs->list, &virtio_fs_instances);
|
|
|
|
|
|
|
|
mutex_unlock(&virtio_fs_mutex);
|
|
|
|
|
|
|
|
if (duplicate)
|
|
|
|
return -EEXIST;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Return the virtio_fs with a given tag, or NULL */
|
|
|
|
static struct virtio_fs *virtio_fs_find_instance(const char *tag)
|
|
|
|
{
|
|
|
|
struct virtio_fs *fs;
|
|
|
|
|
|
|
|
mutex_lock(&virtio_fs_mutex);
|
|
|
|
|
|
|
|
list_for_each_entry(fs, &virtio_fs_instances, list) {
|
|
|
|
if (strcmp(fs->tag, tag) == 0) {
|
|
|
|
kref_get(&fs->refcount);
|
|
|
|
goto found;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
fs = NULL; /* not found */
|
|
|
|
|
|
|
|
found:
|
|
|
|
mutex_unlock(&virtio_fs_mutex);
|
|
|
|
|
|
|
|
return fs;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_fs_free_devs(struct virtio_fs *fs)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
for (i = 0; i < fs->nvqs; i++) {
|
|
|
|
struct virtio_fs_vq *fsvq = &fs->vqs[i];
|
|
|
|
|
|
|
|
if (!fsvq->fud)
|
|
|
|
continue;
|
|
|
|
|
|
|
|
fuse_dev_free(fsvq->fud);
|
|
|
|
fsvq->fud = NULL;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Read filesystem name from virtio config into fs->tag (must kfree()). */
|
|
|
|
static int virtio_fs_read_tag(struct virtio_device *vdev, struct virtio_fs *fs)
|
|
|
|
{
|
|
|
|
char tag_buf[sizeof_field(struct virtio_fs_config, tag)];
|
|
|
|
char *end;
|
|
|
|
size_t len;
|
|
|
|
|
|
|
|
virtio_cread_bytes(vdev, offsetof(struct virtio_fs_config, tag),
|
|
|
|
&tag_buf, sizeof(tag_buf));
|
|
|
|
end = memchr(tag_buf, '\0', sizeof(tag_buf));
|
|
|
|
if (end == tag_buf)
|
|
|
|
return -EINVAL; /* empty tag */
|
|
|
|
if (!end)
|
|
|
|
end = &tag_buf[sizeof(tag_buf)];
|
|
|
|
|
|
|
|
len = end - tag_buf;
|
|
|
|
fs->tag = devm_kmalloc(&vdev->dev, len + 1, GFP_KERNEL);
|
|
|
|
if (!fs->tag)
|
|
|
|
return -ENOMEM;
|
|
|
|
memcpy(fs->tag, tag_buf, len);
|
|
|
|
fs->tag[len] = '\0';
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Work function for hiprio completion */
|
|
|
|
static void virtio_fs_hiprio_done_work(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct virtio_fs_vq *fsvq = container_of(work, struct virtio_fs_vq,
|
|
|
|
done_work);
|
|
|
|
struct virtqueue *vq = fsvq->vq;
|
|
|
|
|
|
|
|
/* Free completed FUSE_FORGET requests */
|
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
do {
|
|
|
|
unsigned int len;
|
|
|
|
void *req;
|
|
|
|
|
|
|
|
virtqueue_disable_cb(vq);
|
|
|
|
|
|
|
|
while ((req = virtqueue_get_buf(vq, &len)) != NULL) {
|
|
|
|
kfree(req);
|
2019-10-15 20:46:25 +03:00
|
|
|
dec_in_flight_req(fsvq);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
}
|
|
|
|
} while (!virtqueue_enable_cb(vq) && likely(!virtqueue_is_broken(vq)));
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
}
|
|
|
|
|
2019-10-15 20:46:22 +03:00
|
|
|
static void virtio_fs_request_dispatch_work(struct work_struct *work)
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
{
|
2019-10-15 20:46:22 +03:00
|
|
|
struct fuse_req *req;
|
|
|
|
struct virtio_fs_vq *fsvq = container_of(work, struct virtio_fs_vq,
|
|
|
|
dispatch_work.work);
|
2019-10-15 20:46:26 +03:00
|
|
|
int ret;
|
2019-10-15 20:46:22 +03:00
|
|
|
|
|
|
|
pr_debug("virtio-fs: worker %s called.\n", __func__);
|
|
|
|
while (1) {
|
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
req = list_first_entry_or_null(&fsvq->end_reqs, struct fuse_req,
|
|
|
|
list);
|
|
|
|
if (!req) {
|
|
|
|
spin_unlock(&fsvq->lock);
|
2019-10-15 20:46:26 +03:00
|
|
|
break;
|
2019-10-15 20:46:22 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
list_del_init(&req->list);
|
|
|
|
spin_unlock(&fsvq->lock);
|
2020-04-20 18:59:34 +03:00
|
|
|
fuse_request_end(req);
|
2019-10-15 20:46:22 +03:00
|
|
|
}
|
2019-10-15 20:46:26 +03:00
|
|
|
|
|
|
|
/* Dispatch pending requests */
|
|
|
|
while (1) {
|
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
req = list_first_entry_or_null(&fsvq->queued_reqs,
|
|
|
|
struct fuse_req, list);
|
|
|
|
if (!req) {
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
list_del_init(&req->list);
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
|
|
|
|
ret = virtio_fs_enqueue_req(fsvq, req, true);
|
|
|
|
if (ret < 0) {
|
|
|
|
if (ret == -ENOMEM || ret == -ENOSPC) {
|
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
list_add_tail(&req->list, &fsvq->queued_reqs);
|
|
|
|
schedule_delayed_work(&fsvq->dispatch_work,
|
|
|
|
msecs_to_jiffies(1));
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
req->out.h.error = ret;
|
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
dec_in_flight_req(fsvq);
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
pr_err("virtio-fs: virtio_fs_enqueue_req() failed %d\n",
|
|
|
|
ret);
|
2020-04-20 18:59:34 +03:00
|
|
|
fuse_request_end(req);
|
2019-10-15 20:46:26 +03:00
|
|
|
}
|
|
|
|
}
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
}
|
|
|
|
|
2019-10-30 18:07:17 +03:00
|
|
|
/*
|
|
|
|
* Returns 1 if queue is full and sender should wait a bit before sending
|
|
|
|
* next request, 0 otherwise.
|
|
|
|
*/
|
|
|
|
static int send_forget_request(struct virtio_fs_vq *fsvq,
|
|
|
|
struct virtio_fs_forget *forget,
|
|
|
|
bool in_flight)
|
|
|
|
{
|
|
|
|
struct scatterlist sg;
|
|
|
|
struct virtqueue *vq;
|
|
|
|
int ret = 0;
|
|
|
|
bool notify;
|
2019-10-30 18:07:18 +03:00
|
|
|
struct virtio_fs_forget_req *req = &forget->req;
|
2019-10-30 18:07:17 +03:00
|
|
|
|
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
if (!fsvq->connected) {
|
|
|
|
if (in_flight)
|
|
|
|
dec_in_flight_req(fsvq);
|
|
|
|
kfree(forget);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2019-10-30 18:07:18 +03:00
|
|
|
sg_init_one(&sg, req, sizeof(*req));
|
2019-10-30 18:07:17 +03:00
|
|
|
vq = fsvq->vq;
|
|
|
|
dev_dbg(&vq->vdev->dev, "%s\n", __func__);
|
|
|
|
|
|
|
|
ret = virtqueue_add_outbuf(vq, &sg, 1, forget, GFP_ATOMIC);
|
|
|
|
if (ret < 0) {
|
|
|
|
if (ret == -ENOMEM || ret == -ENOSPC) {
|
|
|
|
pr_debug("virtio-fs: Could not queue FORGET: err=%d. Will try later\n",
|
|
|
|
ret);
|
|
|
|
list_add_tail(&forget->list, &fsvq->queued_reqs);
|
|
|
|
schedule_delayed_work(&fsvq->dispatch_work,
|
|
|
|
msecs_to_jiffies(1));
|
|
|
|
if (!in_flight)
|
|
|
|
inc_in_flight_req(fsvq);
|
|
|
|
/* Queue is full */
|
|
|
|
ret = 1;
|
|
|
|
} else {
|
|
|
|
pr_debug("virtio-fs: Could not queue FORGET: err=%d. Dropping it.\n",
|
|
|
|
ret);
|
|
|
|
kfree(forget);
|
|
|
|
if (in_flight)
|
|
|
|
dec_in_flight_req(fsvq);
|
|
|
|
}
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!in_flight)
|
|
|
|
inc_in_flight_req(fsvq);
|
|
|
|
notify = virtqueue_kick_prepare(vq);
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
|
|
|
|
if (notify)
|
|
|
|
virtqueue_notify(vq);
|
|
|
|
return ret;
|
|
|
|
out:
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
static void virtio_fs_hiprio_dispatch_work(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct virtio_fs_forget *forget;
|
|
|
|
struct virtio_fs_vq *fsvq = container_of(work, struct virtio_fs_vq,
|
|
|
|
dispatch_work.work);
|
|
|
|
pr_debug("virtio-fs: worker %s called.\n", __func__);
|
|
|
|
while (1) {
|
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
forget = list_first_entry_or_null(&fsvq->queued_reqs,
|
|
|
|
struct virtio_fs_forget, list);
|
|
|
|
if (!forget) {
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
|
|
|
list_del(&forget->list);
|
|
|
|
spin_unlock(&fsvq->lock);
|
2019-10-30 18:07:17 +03:00
|
|
|
if (send_forget_request(fsvq, forget, true))
|
|
|
|
return;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Allocate and copy args into req->argbuf */
|
|
|
|
static int copy_args_to_argbuf(struct fuse_req *req)
|
|
|
|
{
|
|
|
|
struct fuse_args *args = req->args;
|
|
|
|
unsigned int offset = 0;
|
|
|
|
unsigned int num_in;
|
|
|
|
unsigned int num_out;
|
|
|
|
unsigned int len;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
num_in = args->in_numargs - args->in_pages;
|
|
|
|
num_out = args->out_numargs - args->out_pages;
|
|
|
|
len = fuse_len_args(num_in, (struct fuse_arg *) args->in_args) +
|
|
|
|
fuse_len_args(num_out, args->out_args);
|
|
|
|
|
|
|
|
req->argbuf = kmalloc(len, GFP_ATOMIC);
|
|
|
|
if (!req->argbuf)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
for (i = 0; i < num_in; i++) {
|
|
|
|
memcpy(req->argbuf + offset,
|
|
|
|
args->in_args[i].value,
|
|
|
|
args->in_args[i].size);
|
|
|
|
offset += args->in_args[i].size;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Copy args out of and free req->argbuf */
|
|
|
|
static void copy_args_from_argbuf(struct fuse_args *args, struct fuse_req *req)
|
|
|
|
{
|
|
|
|
unsigned int remaining;
|
|
|
|
unsigned int offset;
|
|
|
|
unsigned int num_in;
|
|
|
|
unsigned int num_out;
|
|
|
|
unsigned int i;
|
|
|
|
|
|
|
|
remaining = req->out.h.len - sizeof(req->out.h);
|
|
|
|
num_in = args->in_numargs - args->in_pages;
|
|
|
|
num_out = args->out_numargs - args->out_pages;
|
|
|
|
offset = fuse_len_args(num_in, (struct fuse_arg *)args->in_args);
|
|
|
|
|
|
|
|
for (i = 0; i < num_out; i++) {
|
|
|
|
unsigned int argsize = args->out_args[i].size;
|
|
|
|
|
|
|
|
if (args->out_argvar &&
|
|
|
|
i == args->out_numargs - 1 &&
|
|
|
|
argsize > remaining) {
|
|
|
|
argsize = remaining;
|
|
|
|
}
|
|
|
|
|
|
|
|
memcpy(args->out_args[i].value, req->argbuf + offset, argsize);
|
|
|
|
offset += argsize;
|
|
|
|
|
|
|
|
if (i != args->out_numargs - 1)
|
|
|
|
remaining -= argsize;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Store the actual size of the variable-length arg */
|
|
|
|
if (args->out_argvar)
|
|
|
|
args->out_args[args->out_numargs - 1].size = remaining;
|
|
|
|
|
|
|
|
kfree(req->argbuf);
|
|
|
|
req->argbuf = NULL;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Work function for request completion */
|
2020-04-20 18:01:34 +03:00
|
|
|
static void virtio_fs_request_complete(struct fuse_req *req,
|
|
|
|
struct virtio_fs_vq *fsvq)
|
|
|
|
{
|
|
|
|
struct fuse_pqueue *fpq = &fsvq->fud->pq;
|
|
|
|
struct fuse_args *args;
|
|
|
|
struct fuse_args_pages *ap;
|
|
|
|
unsigned int len, i, thislen;
|
|
|
|
struct page *page;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* TODO verify that server properly follows FUSE protocol
|
|
|
|
* (oh.uniq, oh.len)
|
|
|
|
*/
|
|
|
|
args = req->args;
|
|
|
|
copy_args_from_argbuf(args, req);
|
|
|
|
|
|
|
|
if (args->out_pages && args->page_zeroing) {
|
|
|
|
len = args->out_args[args->out_numargs - 1].size;
|
|
|
|
ap = container_of(args, typeof(*ap), args);
|
|
|
|
for (i = 0; i < ap->num_pages; i++) {
|
|
|
|
thislen = ap->descs[i].length;
|
|
|
|
if (len < thislen) {
|
|
|
|
WARN_ON(ap->descs[i].offset);
|
|
|
|
page = ap->pages[i];
|
|
|
|
zero_user_segment(page, len, thislen);
|
|
|
|
len = 0;
|
|
|
|
} else {
|
|
|
|
len -= thislen;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
spin_lock(&fpq->lock);
|
|
|
|
clear_bit(FR_SENT, &req->flags);
|
|
|
|
spin_unlock(&fpq->lock);
|
|
|
|
|
2020-04-20 18:59:34 +03:00
|
|
|
fuse_request_end(req);
|
2020-04-20 18:01:34 +03:00
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
dec_in_flight_req(fsvq);
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_fs_complete_req_work(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct virtio_fs_req_work *w =
|
|
|
|
container_of(work, typeof(*w), done_work);
|
|
|
|
|
|
|
|
virtio_fs_request_complete(w->req, w->fsvq);
|
|
|
|
kfree(w);
|
|
|
|
}
|
|
|
|
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
static void virtio_fs_requests_done_work(struct work_struct *work)
|
|
|
|
{
|
|
|
|
struct virtio_fs_vq *fsvq = container_of(work, struct virtio_fs_vq,
|
|
|
|
done_work);
|
|
|
|
struct fuse_pqueue *fpq = &fsvq->fud->pq;
|
|
|
|
struct virtqueue *vq = fsvq->vq;
|
|
|
|
struct fuse_req *req;
|
|
|
|
struct fuse_req *next;
|
2020-04-20 18:01:34 +03:00
|
|
|
unsigned int len;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
LIST_HEAD(reqs);
|
|
|
|
|
|
|
|
/* Collect completed requests off the virtqueue */
|
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
do {
|
|
|
|
virtqueue_disable_cb(vq);
|
|
|
|
|
|
|
|
while ((req = virtqueue_get_buf(vq, &len)) != NULL) {
|
|
|
|
spin_lock(&fpq->lock);
|
|
|
|
list_move_tail(&req->list, &reqs);
|
|
|
|
spin_unlock(&fpq->lock);
|
|
|
|
}
|
|
|
|
} while (!virtqueue_enable_cb(vq) && likely(!virtqueue_is_broken(vq)));
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
|
|
|
|
/* End requests */
|
|
|
|
list_for_each_entry_safe(req, next, &reqs, list) {
|
|
|
|
list_del_init(&req->list);
|
|
|
|
|
2020-04-20 18:01:34 +03:00
|
|
|
/* blocking async request completes in a worker context */
|
|
|
|
if (req->args->may_block) {
|
|
|
|
struct virtio_fs_req_work *w;
|
|
|
|
|
|
|
|
w = kzalloc(sizeof(*w), GFP_NOFS | __GFP_NOFAIL);
|
|
|
|
INIT_WORK(&w->done_work, virtio_fs_complete_req_work);
|
|
|
|
w->fsvq = fsvq;
|
|
|
|
w->req = req;
|
|
|
|
schedule_work(&w->done_work);
|
|
|
|
} else {
|
|
|
|
virtio_fs_request_complete(req, fsvq);
|
|
|
|
}
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Virtqueue interrupt handler */
|
|
|
|
static void virtio_fs_vq_done(struct virtqueue *vq)
|
|
|
|
{
|
|
|
|
struct virtio_fs_vq *fsvq = vq_to_fsvq(vq);
|
|
|
|
|
|
|
|
dev_dbg(&vq->vdev->dev, "%s %s\n", __func__, fsvq->name);
|
|
|
|
|
|
|
|
schedule_work(&fsvq->done_work);
|
|
|
|
}
|
|
|
|
|
2020-08-20 01:19:44 +03:00
|
|
|
static void virtio_fs_init_vq(struct virtio_fs_vq *fsvq, char *name,
|
|
|
|
int vq_type)
|
|
|
|
{
|
|
|
|
strncpy(fsvq->name, name, VQ_NAME_LEN);
|
|
|
|
spin_lock_init(&fsvq->lock);
|
|
|
|
INIT_LIST_HEAD(&fsvq->queued_reqs);
|
|
|
|
INIT_LIST_HEAD(&fsvq->end_reqs);
|
|
|
|
init_completion(&fsvq->in_flight_zero);
|
|
|
|
|
|
|
|
if (vq_type == VQ_REQUEST) {
|
|
|
|
INIT_WORK(&fsvq->done_work, virtio_fs_requests_done_work);
|
|
|
|
INIT_DELAYED_WORK(&fsvq->dispatch_work,
|
|
|
|
virtio_fs_request_dispatch_work);
|
|
|
|
} else {
|
|
|
|
INIT_WORK(&fsvq->done_work, virtio_fs_hiprio_done_work);
|
|
|
|
INIT_DELAYED_WORK(&fsvq->dispatch_work,
|
|
|
|
virtio_fs_hiprio_dispatch_work);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
/* Initialize virtqueues */
|
|
|
|
static int virtio_fs_setup_vqs(struct virtio_device *vdev,
|
|
|
|
struct virtio_fs *fs)
|
|
|
|
{
|
|
|
|
struct virtqueue **vqs;
|
|
|
|
vq_callback_t **callbacks;
|
|
|
|
const char **names;
|
|
|
|
unsigned int i;
|
|
|
|
int ret = 0;
|
|
|
|
|
2020-08-05 12:39:36 +03:00
|
|
|
virtio_cread_le(vdev, struct virtio_fs_config, num_request_queues,
|
|
|
|
&fs->num_request_queues);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
if (fs->num_request_queues == 0)
|
|
|
|
return -EINVAL;
|
|
|
|
|
2020-08-20 01:19:44 +03:00
|
|
|
fs->nvqs = VQ_REQUEST + fs->num_request_queues;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
fs->vqs = kcalloc(fs->nvqs, sizeof(fs->vqs[VQ_HIPRIO]), GFP_KERNEL);
|
|
|
|
if (!fs->vqs)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
vqs = kmalloc_array(fs->nvqs, sizeof(vqs[VQ_HIPRIO]), GFP_KERNEL);
|
|
|
|
callbacks = kmalloc_array(fs->nvqs, sizeof(callbacks[VQ_HIPRIO]),
|
|
|
|
GFP_KERNEL);
|
|
|
|
names = kmalloc_array(fs->nvqs, sizeof(names[VQ_HIPRIO]), GFP_KERNEL);
|
|
|
|
if (!vqs || !callbacks || !names) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2020-08-20 01:19:44 +03:00
|
|
|
/* Initialize the hiprio/forget request virtqueue */
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
callbacks[VQ_HIPRIO] = virtio_fs_vq_done;
|
2020-08-20 01:19:44 +03:00
|
|
|
virtio_fs_init_vq(&fs->vqs[VQ_HIPRIO], "hiprio", VQ_HIPRIO);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
names[VQ_HIPRIO] = fs->vqs[VQ_HIPRIO].name;
|
|
|
|
|
|
|
|
/* Initialize the requests virtqueues */
|
|
|
|
for (i = VQ_REQUEST; i < fs->nvqs; i++) {
|
2020-08-20 01:19:44 +03:00
|
|
|
char vq_name[VQ_NAME_LEN];
|
|
|
|
|
|
|
|
snprintf(vq_name, VQ_NAME_LEN, "requests.%u", i - VQ_REQUEST);
|
|
|
|
virtio_fs_init_vq(&fs->vqs[i], vq_name, VQ_REQUEST);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
callbacks[i] = virtio_fs_vq_done;
|
|
|
|
names[i] = fs->vqs[i].name;
|
|
|
|
}
|
|
|
|
|
|
|
|
ret = virtio_find_vqs(vdev, fs->nvqs, vqs, callbacks, names, NULL);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
for (i = 0; i < fs->nvqs; i++)
|
|
|
|
fs->vqs[i].vq = vqs[i];
|
|
|
|
|
|
|
|
virtio_fs_start_all_queues(fs);
|
|
|
|
out:
|
|
|
|
kfree(names);
|
|
|
|
kfree(callbacks);
|
|
|
|
kfree(vqs);
|
|
|
|
if (ret)
|
|
|
|
kfree(fs->vqs);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Free virtqueues (device must already be reset) */
|
|
|
|
static void virtio_fs_cleanup_vqs(struct virtio_device *vdev,
|
|
|
|
struct virtio_fs *fs)
|
|
|
|
{
|
|
|
|
vdev->config->del_vqs(vdev);
|
|
|
|
}
|
|
|
|
|
2020-08-20 01:19:46 +03:00
|
|
|
/* Map a window offset to a page frame number. The window offset will have
|
|
|
|
* been produced by .iomap_begin(), which maps a file offset to a window
|
|
|
|
* offset.
|
|
|
|
*/
|
|
|
|
static long virtio_fs_direct_access(struct dax_device *dax_dev, pgoff_t pgoff,
|
|
|
|
long nr_pages, void **kaddr, pfn_t *pfn)
|
|
|
|
{
|
|
|
|
struct virtio_fs *fs = dax_get_private(dax_dev);
|
|
|
|
phys_addr_t offset = PFN_PHYS(pgoff);
|
|
|
|
size_t max_nr_pages = fs->window_len/PAGE_SIZE - pgoff;
|
|
|
|
|
|
|
|
if (kaddr)
|
|
|
|
*kaddr = fs->window_kaddr + offset;
|
|
|
|
if (pfn)
|
|
|
|
*pfn = phys_to_pfn_t(fs->window_phys_addr + offset,
|
|
|
|
PFN_DEV | PFN_MAP);
|
|
|
|
return nr_pages > max_nr_pages ? max_nr_pages : nr_pages;
|
|
|
|
}
|
|
|
|
|
|
|
|
static size_t virtio_fs_copy_from_iter(struct dax_device *dax_dev,
|
|
|
|
pgoff_t pgoff, void *addr,
|
|
|
|
size_t bytes, struct iov_iter *i)
|
|
|
|
{
|
|
|
|
return copy_from_iter(addr, bytes, i);
|
|
|
|
}
|
|
|
|
|
|
|
|
static size_t virtio_fs_copy_to_iter(struct dax_device *dax_dev,
|
|
|
|
pgoff_t pgoff, void *addr,
|
|
|
|
size_t bytes, struct iov_iter *i)
|
|
|
|
{
|
|
|
|
return copy_to_iter(addr, bytes, i);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int virtio_fs_zero_page_range(struct dax_device *dax_dev,
|
|
|
|
pgoff_t pgoff, size_t nr_pages)
|
|
|
|
{
|
|
|
|
long rc;
|
|
|
|
void *kaddr;
|
|
|
|
|
|
|
|
rc = dax_direct_access(dax_dev, pgoff, nr_pages, &kaddr, NULL);
|
|
|
|
if (rc < 0)
|
|
|
|
return rc;
|
|
|
|
memset(kaddr, 0, nr_pages << PAGE_SHIFT);
|
|
|
|
dax_flush(dax_dev, kaddr, nr_pages << PAGE_SHIFT);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static const struct dax_operations virtio_fs_dax_ops = {
|
|
|
|
.direct_access = virtio_fs_direct_access,
|
|
|
|
.copy_from_iter = virtio_fs_copy_from_iter,
|
|
|
|
.copy_to_iter = virtio_fs_copy_to_iter,
|
|
|
|
.zero_page_range = virtio_fs_zero_page_range,
|
|
|
|
};
|
|
|
|
|
|
|
|
static void virtio_fs_cleanup_dax(void *data)
|
|
|
|
{
|
|
|
|
struct dax_device *dax_dev = data;
|
|
|
|
|
|
|
|
kill_dax(dax_dev);
|
|
|
|
put_dax(dax_dev);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int virtio_fs_setup_dax(struct virtio_device *vdev, struct virtio_fs *fs)
|
|
|
|
{
|
|
|
|
struct virtio_shm_region cache_reg;
|
|
|
|
struct dev_pagemap *pgmap;
|
|
|
|
bool have_cache;
|
|
|
|
|
|
|
|
if (!IS_ENABLED(CONFIG_FUSE_DAX))
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
/* Get cache region */
|
|
|
|
have_cache = virtio_get_shm_region(vdev, &cache_reg,
|
|
|
|
(u8)VIRTIO_FS_SHMCAP_ID_CACHE);
|
|
|
|
if (!have_cache) {
|
|
|
|
dev_notice(&vdev->dev, "%s: No cache capability\n", __func__);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
if (!devm_request_mem_region(&vdev->dev, cache_reg.addr, cache_reg.len,
|
|
|
|
dev_name(&vdev->dev))) {
|
|
|
|
dev_warn(&vdev->dev, "could not reserve region addr=0x%llx len=0x%llx\n",
|
|
|
|
cache_reg.addr, cache_reg.len);
|
|
|
|
return -EBUSY;
|
|
|
|
}
|
|
|
|
|
|
|
|
dev_notice(&vdev->dev, "Cache len: 0x%llx @ 0x%llx\n", cache_reg.len,
|
|
|
|
cache_reg.addr);
|
|
|
|
|
|
|
|
pgmap = devm_kzalloc(&vdev->dev, sizeof(*pgmap), GFP_KERNEL);
|
|
|
|
if (!pgmap)
|
|
|
|
return -ENOMEM;
|
|
|
|
|
|
|
|
pgmap->type = MEMORY_DEVICE_FS_DAX;
|
|
|
|
|
|
|
|
/* Ideally we would directly use the PCI BAR resource but
|
|
|
|
* devm_memremap_pages() wants its own copy in pgmap. So
|
|
|
|
* initialize a struct resource from scratch (only the start
|
|
|
|
* and end fields will be used).
|
|
|
|
*/
|
2020-10-20 00:28:30 +03:00
|
|
|
pgmap->range = (struct range) {
|
2020-08-20 01:19:46 +03:00
|
|
|
.start = (phys_addr_t) cache_reg.addr,
|
|
|
|
.end = (phys_addr_t) cache_reg.addr + cache_reg.len - 1,
|
|
|
|
};
|
2020-10-20 00:28:30 +03:00
|
|
|
pgmap->nr_range = 1;
|
2020-08-20 01:19:46 +03:00
|
|
|
|
|
|
|
fs->window_kaddr = devm_memremap_pages(&vdev->dev, pgmap);
|
|
|
|
if (IS_ERR(fs->window_kaddr))
|
|
|
|
return PTR_ERR(fs->window_kaddr);
|
|
|
|
|
|
|
|
fs->window_phys_addr = (phys_addr_t) cache_reg.addr;
|
|
|
|
fs->window_len = (phys_addr_t) cache_reg.len;
|
|
|
|
|
|
|
|
dev_dbg(&vdev->dev, "%s: window kaddr 0x%px phys_addr 0x%llx len 0x%llx\n",
|
|
|
|
__func__, fs->window_kaddr, cache_reg.addr, cache_reg.len);
|
|
|
|
|
|
|
|
fs->dax_dev = alloc_dax(fs, NULL, &virtio_fs_dax_ops, 0);
|
|
|
|
if (IS_ERR(fs->dax_dev))
|
|
|
|
return PTR_ERR(fs->dax_dev);
|
|
|
|
|
|
|
|
return devm_add_action_or_reset(&vdev->dev, virtio_fs_cleanup_dax,
|
|
|
|
fs->dax_dev);
|
|
|
|
}
|
|
|
|
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
static int virtio_fs_probe(struct virtio_device *vdev)
|
|
|
|
{
|
|
|
|
struct virtio_fs *fs;
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
fs = kzalloc(sizeof(*fs), GFP_KERNEL);
|
|
|
|
if (!fs)
|
|
|
|
return -ENOMEM;
|
|
|
|
kref_init(&fs->refcount);
|
|
|
|
vdev->priv = fs;
|
|
|
|
|
|
|
|
ret = virtio_fs_read_tag(vdev, fs);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
ret = virtio_fs_setup_vqs(vdev, fs);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/* TODO vq affinity */
|
|
|
|
|
2020-08-20 01:19:46 +03:00
|
|
|
ret = virtio_fs_setup_dax(vdev, fs);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out_vqs;
|
|
|
|
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
/* Bring the device online in case the filesystem is mounted and
|
|
|
|
* requests need to be sent before we return.
|
|
|
|
*/
|
|
|
|
virtio_device_ready(vdev);
|
|
|
|
|
|
|
|
ret = virtio_fs_add_instance(fs);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out_vqs;
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
out_vqs:
|
|
|
|
vdev->config->reset(vdev);
|
|
|
|
virtio_fs_cleanup_vqs(vdev, fs);
|
|
|
|
|
|
|
|
out:
|
|
|
|
vdev->priv = NULL;
|
|
|
|
kfree(fs);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_fs_stop_all_queues(struct virtio_fs *fs)
|
|
|
|
{
|
|
|
|
struct virtio_fs_vq *fsvq;
|
|
|
|
int i;
|
|
|
|
|
|
|
|
for (i = 0; i < fs->nvqs; i++) {
|
|
|
|
fsvq = &fs->vqs[i];
|
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
fsvq->connected = false;
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_fs_remove(struct virtio_device *vdev)
|
|
|
|
{
|
|
|
|
struct virtio_fs *fs = vdev->priv;
|
|
|
|
|
|
|
|
mutex_lock(&virtio_fs_mutex);
|
|
|
|
/* This device is going away. No one should get new reference */
|
|
|
|
list_del_init(&fs->list);
|
|
|
|
virtio_fs_stop_all_queues(fs);
|
2019-10-30 18:07:19 +03:00
|
|
|
virtio_fs_drain_all_queues_locked(fs);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
vdev->config->reset(vdev);
|
|
|
|
virtio_fs_cleanup_vqs(vdev, fs);
|
|
|
|
|
|
|
|
vdev->priv = NULL;
|
|
|
|
/* Put device reference on virtio_fs object */
|
|
|
|
virtio_fs_put(fs);
|
|
|
|
mutex_unlock(&virtio_fs_mutex);
|
|
|
|
}
|
|
|
|
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
static int virtio_fs_freeze(struct virtio_device *vdev)
|
|
|
|
{
|
|
|
|
/* TODO need to save state here */
|
|
|
|
pr_warn("virtio-fs: suspend/resume not yet supported\n");
|
|
|
|
return -EOPNOTSUPP;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int virtio_fs_restore(struct virtio_device *vdev)
|
|
|
|
{
|
|
|
|
/* TODO need to restore state here */
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
|
2019-11-11 15:23:59 +03:00
|
|
|
static const struct virtio_device_id id_table[] = {
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
{ VIRTIO_ID_FS, VIRTIO_DEV_ANY_ID },
|
|
|
|
{},
|
|
|
|
};
|
|
|
|
|
2019-11-11 15:23:59 +03:00
|
|
|
static const unsigned int feature_table[] = {};
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
|
|
|
|
static struct virtio_driver virtio_fs_driver = {
|
|
|
|
.driver.name = KBUILD_MODNAME,
|
|
|
|
.driver.owner = THIS_MODULE,
|
|
|
|
.id_table = id_table,
|
|
|
|
.feature_table = feature_table,
|
|
|
|
.feature_table_size = ARRAY_SIZE(feature_table),
|
|
|
|
.probe = virtio_fs_probe,
|
|
|
|
.remove = virtio_fs_remove,
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
|
|
.freeze = virtio_fs_freeze,
|
|
|
|
.restore = virtio_fs_restore,
|
|
|
|
#endif
|
|
|
|
};
|
|
|
|
|
|
|
|
static void virtio_fs_wake_forget_and_unlock(struct fuse_iqueue *fiq)
|
|
|
|
__releases(fiq->lock)
|
|
|
|
{
|
|
|
|
struct fuse_forget_link *link;
|
|
|
|
struct virtio_fs_forget *forget;
|
2019-10-30 18:07:18 +03:00
|
|
|
struct virtio_fs_forget_req *req;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
struct virtio_fs *fs;
|
|
|
|
struct virtio_fs_vq *fsvq;
|
|
|
|
u64 unique;
|
|
|
|
|
|
|
|
link = fuse_dequeue_forget(fiq, 1, NULL);
|
|
|
|
unique = fuse_get_unique(fiq);
|
|
|
|
|
|
|
|
fs = fiq->priv;
|
|
|
|
fsvq = &fs->vqs[VQ_HIPRIO];
|
|
|
|
spin_unlock(&fiq->lock);
|
|
|
|
|
|
|
|
/* Allocate a buffer for the request */
|
|
|
|
forget = kmalloc(sizeof(*forget), GFP_NOFS | __GFP_NOFAIL);
|
2019-10-30 18:07:18 +03:00
|
|
|
req = &forget->req;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
|
2019-10-30 18:07:18 +03:00
|
|
|
req->ih = (struct fuse_in_header){
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
.opcode = FUSE_FORGET,
|
|
|
|
.nodeid = link->forget_one.nodeid,
|
|
|
|
.unique = unique,
|
2019-10-30 18:07:18 +03:00
|
|
|
.len = sizeof(*req),
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
};
|
2019-10-30 18:07:18 +03:00
|
|
|
req->arg = (struct fuse_forget_in){
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
.nlookup = link->forget_one.nlookup,
|
|
|
|
};
|
|
|
|
|
2019-10-30 18:07:17 +03:00
|
|
|
send_forget_request(fsvq, forget, false);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
kfree(link);
|
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_fs_wake_interrupt_and_unlock(struct fuse_iqueue *fiq)
|
|
|
|
__releases(fiq->lock)
|
|
|
|
{
|
|
|
|
/*
|
|
|
|
* TODO interrupts.
|
|
|
|
*
|
|
|
|
* Normal fs operations on a local filesystems aren't interruptible.
|
|
|
|
* Exceptions are blocking lock operations; for example fcntl(F_SETLKW)
|
|
|
|
* with shared lock between host and guest.
|
|
|
|
*/
|
|
|
|
spin_unlock(&fiq->lock);
|
|
|
|
}
|
|
|
|
|
virtiofs: calculate number of scatter-gather elements accurately
virtiofs currently maps various buffers in scatter gather list and it looks
at number of pages (ap->pages) and assumes that same number of pages will
be used both for input and output (sg_count_fuse_req()), and calculates
total number of scatterlist elements accordingly.
But looks like this assumption is not valid in all the cases. For example,
Cai Qian reported that trinity, triggers warning with virtiofs sometimes.
A closer look revealed that if one calls ioctl(fd, 0x5a004000, buf), it
will trigger following warning.
WARN_ON(out_sgs + in_sgs != total_sgs)
In this case, total_sgs = 8, out_sgs=4, in_sgs=3. Number of pages is 2
(ap->pages), but out_sgs are using both the pages but in_sgs are using
only one page. In this case, fuse_do_ioctl() sets different size values
for input and output.
args->in_args[args->in_numargs - 1].size == 6656
args->out_args[args->out_numargs - 1].size == 4096
So current method of calculating how many scatter-gather list elements
will be used is not accurate. Make calculations more precise by parsing
size and ap->descs.
Reported-by: Qian Cai <cai@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/linux-fsdevel/5ea77e9f6cb8c2db43b09fbd4158ab2d8c066a0a.camel@redhat.com/
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-10-06 21:53:06 +03:00
|
|
|
/* Count number of scatter-gather elements required */
|
|
|
|
static unsigned int sg_count_fuse_pages(struct fuse_page_desc *page_descs,
|
|
|
|
unsigned int num_pages,
|
|
|
|
unsigned int total_len)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
unsigned int this_len;
|
|
|
|
|
|
|
|
for (i = 0; i < num_pages && total_len; i++) {
|
|
|
|
this_len = min(page_descs[i].length, total_len);
|
|
|
|
total_len -= this_len;
|
|
|
|
}
|
|
|
|
|
|
|
|
return i;
|
|
|
|
}
|
|
|
|
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
/* Return the number of scatter-gather list elements required */
|
|
|
|
static unsigned int sg_count_fuse_req(struct fuse_req *req)
|
|
|
|
{
|
|
|
|
struct fuse_args *args = req->args;
|
|
|
|
struct fuse_args_pages *ap = container_of(args, typeof(*ap), args);
|
virtiofs: calculate number of scatter-gather elements accurately
virtiofs currently maps various buffers in scatter gather list and it looks
at number of pages (ap->pages) and assumes that same number of pages will
be used both for input and output (sg_count_fuse_req()), and calculates
total number of scatterlist elements accordingly.
But looks like this assumption is not valid in all the cases. For example,
Cai Qian reported that trinity, triggers warning with virtiofs sometimes.
A closer look revealed that if one calls ioctl(fd, 0x5a004000, buf), it
will trigger following warning.
WARN_ON(out_sgs + in_sgs != total_sgs)
In this case, total_sgs = 8, out_sgs=4, in_sgs=3. Number of pages is 2
(ap->pages), but out_sgs are using both the pages but in_sgs are using
only one page. In this case, fuse_do_ioctl() sets different size values
for input and output.
args->in_args[args->in_numargs - 1].size == 6656
args->out_args[args->out_numargs - 1].size == 4096
So current method of calculating how many scatter-gather list elements
will be used is not accurate. Make calculations more precise by parsing
size and ap->descs.
Reported-by: Qian Cai <cai@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/linux-fsdevel/5ea77e9f6cb8c2db43b09fbd4158ab2d8c066a0a.camel@redhat.com/
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-10-06 21:53:06 +03:00
|
|
|
unsigned int size, total_sgs = 1 /* fuse_in_header */;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
|
|
|
|
if (args->in_numargs - args->in_pages)
|
|
|
|
total_sgs += 1;
|
|
|
|
|
virtiofs: calculate number of scatter-gather elements accurately
virtiofs currently maps various buffers in scatter gather list and it looks
at number of pages (ap->pages) and assumes that same number of pages will
be used both for input and output (sg_count_fuse_req()), and calculates
total number of scatterlist elements accordingly.
But looks like this assumption is not valid in all the cases. For example,
Cai Qian reported that trinity, triggers warning with virtiofs sometimes.
A closer look revealed that if one calls ioctl(fd, 0x5a004000, buf), it
will trigger following warning.
WARN_ON(out_sgs + in_sgs != total_sgs)
In this case, total_sgs = 8, out_sgs=4, in_sgs=3. Number of pages is 2
(ap->pages), but out_sgs are using both the pages but in_sgs are using
only one page. In this case, fuse_do_ioctl() sets different size values
for input and output.
args->in_args[args->in_numargs - 1].size == 6656
args->out_args[args->out_numargs - 1].size == 4096
So current method of calculating how many scatter-gather list elements
will be used is not accurate. Make calculations more precise by parsing
size and ap->descs.
Reported-by: Qian Cai <cai@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/linux-fsdevel/5ea77e9f6cb8c2db43b09fbd4158ab2d8c066a0a.camel@redhat.com/
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-10-06 21:53:06 +03:00
|
|
|
if (args->in_pages) {
|
|
|
|
size = args->in_args[args->in_numargs - 1].size;
|
|
|
|
total_sgs += sg_count_fuse_pages(ap->descs, ap->num_pages,
|
|
|
|
size);
|
|
|
|
}
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
|
|
|
|
if (!test_bit(FR_ISREPLY, &req->flags))
|
|
|
|
return total_sgs;
|
|
|
|
|
|
|
|
total_sgs += 1 /* fuse_out_header */;
|
|
|
|
|
|
|
|
if (args->out_numargs - args->out_pages)
|
|
|
|
total_sgs += 1;
|
|
|
|
|
virtiofs: calculate number of scatter-gather elements accurately
virtiofs currently maps various buffers in scatter gather list and it looks
at number of pages (ap->pages) and assumes that same number of pages will
be used both for input and output (sg_count_fuse_req()), and calculates
total number of scatterlist elements accordingly.
But looks like this assumption is not valid in all the cases. For example,
Cai Qian reported that trinity, triggers warning with virtiofs sometimes.
A closer look revealed that if one calls ioctl(fd, 0x5a004000, buf), it
will trigger following warning.
WARN_ON(out_sgs + in_sgs != total_sgs)
In this case, total_sgs = 8, out_sgs=4, in_sgs=3. Number of pages is 2
(ap->pages), but out_sgs are using both the pages but in_sgs are using
only one page. In this case, fuse_do_ioctl() sets different size values
for input and output.
args->in_args[args->in_numargs - 1].size == 6656
args->out_args[args->out_numargs - 1].size == 4096
So current method of calculating how many scatter-gather list elements
will be used is not accurate. Make calculations more precise by parsing
size and ap->descs.
Reported-by: Qian Cai <cai@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Link: https://lore.kernel.org/linux-fsdevel/5ea77e9f6cb8c2db43b09fbd4158ab2d8c066a0a.camel@redhat.com/
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2020-10-06 21:53:06 +03:00
|
|
|
if (args->out_pages) {
|
|
|
|
size = args->out_args[args->out_numargs - 1].size;
|
|
|
|
total_sgs += sg_count_fuse_pages(ap->descs, ap->num_pages,
|
|
|
|
size);
|
|
|
|
}
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
|
|
|
|
return total_sgs;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Add pages to scatter-gather list and return number of elements used */
|
|
|
|
static unsigned int sg_init_fuse_pages(struct scatterlist *sg,
|
|
|
|
struct page **pages,
|
|
|
|
struct fuse_page_desc *page_descs,
|
|
|
|
unsigned int num_pages,
|
|
|
|
unsigned int total_len)
|
|
|
|
{
|
|
|
|
unsigned int i;
|
|
|
|
unsigned int this_len;
|
|
|
|
|
|
|
|
for (i = 0; i < num_pages && total_len; i++) {
|
|
|
|
sg_init_table(&sg[i], 1);
|
|
|
|
this_len = min(page_descs[i].length, total_len);
|
|
|
|
sg_set_page(&sg[i], pages[i], this_len, page_descs[i].offset);
|
|
|
|
total_len -= this_len;
|
|
|
|
}
|
|
|
|
|
|
|
|
return i;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Add args to scatter-gather list and return number of elements used */
|
|
|
|
static unsigned int sg_init_fuse_args(struct scatterlist *sg,
|
|
|
|
struct fuse_req *req,
|
|
|
|
struct fuse_arg *args,
|
|
|
|
unsigned int numargs,
|
|
|
|
bool argpages,
|
|
|
|
void *argbuf,
|
|
|
|
unsigned int *len_used)
|
|
|
|
{
|
|
|
|
struct fuse_args_pages *ap = container_of(req->args, typeof(*ap), args);
|
|
|
|
unsigned int total_sgs = 0;
|
|
|
|
unsigned int len;
|
|
|
|
|
|
|
|
len = fuse_len_args(numargs - argpages, args);
|
|
|
|
if (len)
|
|
|
|
sg_init_one(&sg[total_sgs++], argbuf, len);
|
|
|
|
|
|
|
|
if (argpages)
|
|
|
|
total_sgs += sg_init_fuse_pages(&sg[total_sgs],
|
|
|
|
ap->pages, ap->descs,
|
|
|
|
ap->num_pages,
|
|
|
|
args[numargs - 1].size);
|
|
|
|
|
|
|
|
if (len_used)
|
|
|
|
*len_used = len;
|
|
|
|
|
|
|
|
return total_sgs;
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Add a request to a virtqueue and kick the device */
|
|
|
|
static int virtio_fs_enqueue_req(struct virtio_fs_vq *fsvq,
|
2019-10-15 20:46:26 +03:00
|
|
|
struct fuse_req *req, bool in_flight)
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
{
|
|
|
|
/* requests need at least 4 elements */
|
|
|
|
struct scatterlist *stack_sgs[6];
|
|
|
|
struct scatterlist stack_sg[ARRAY_SIZE(stack_sgs)];
|
|
|
|
struct scatterlist **sgs = stack_sgs;
|
|
|
|
struct scatterlist *sg = stack_sg;
|
|
|
|
struct virtqueue *vq;
|
|
|
|
struct fuse_args *args = req->args;
|
|
|
|
unsigned int argbuf_used = 0;
|
|
|
|
unsigned int out_sgs = 0;
|
|
|
|
unsigned int in_sgs = 0;
|
|
|
|
unsigned int total_sgs;
|
|
|
|
unsigned int i;
|
|
|
|
int ret;
|
|
|
|
bool notify;
|
2019-10-15 20:46:24 +03:00
|
|
|
struct fuse_pqueue *fpq;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
|
|
|
|
/* Does the sglist fit on the stack? */
|
|
|
|
total_sgs = sg_count_fuse_req(req);
|
|
|
|
if (total_sgs > ARRAY_SIZE(stack_sgs)) {
|
|
|
|
sgs = kmalloc_array(total_sgs, sizeof(sgs[0]), GFP_ATOMIC);
|
|
|
|
sg = kmalloc_array(total_sgs, sizeof(sg[0]), GFP_ATOMIC);
|
|
|
|
if (!sgs || !sg) {
|
|
|
|
ret = -ENOMEM;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Use a bounce buffer since stack args cannot be mapped */
|
|
|
|
ret = copy_args_to_argbuf(req);
|
|
|
|
if (ret < 0)
|
|
|
|
goto out;
|
|
|
|
|
|
|
|
/* Request elements */
|
|
|
|
sg_init_one(&sg[out_sgs++], &req->in.h, sizeof(req->in.h));
|
|
|
|
out_sgs += sg_init_fuse_args(&sg[out_sgs], req,
|
|
|
|
(struct fuse_arg *)args->in_args,
|
|
|
|
args->in_numargs, args->in_pages,
|
|
|
|
req->argbuf, &argbuf_used);
|
|
|
|
|
|
|
|
/* Reply elements */
|
|
|
|
if (test_bit(FR_ISREPLY, &req->flags)) {
|
|
|
|
sg_init_one(&sg[out_sgs + in_sgs++],
|
|
|
|
&req->out.h, sizeof(req->out.h));
|
|
|
|
in_sgs += sg_init_fuse_args(&sg[out_sgs + in_sgs], req,
|
|
|
|
args->out_args, args->out_numargs,
|
|
|
|
args->out_pages,
|
|
|
|
req->argbuf + argbuf_used, NULL);
|
|
|
|
}
|
|
|
|
|
|
|
|
WARN_ON(out_sgs + in_sgs != total_sgs);
|
|
|
|
|
|
|
|
for (i = 0; i < total_sgs; i++)
|
|
|
|
sgs[i] = &sg[i];
|
|
|
|
|
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
|
|
|
|
if (!fsvq->connected) {
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
ret = -ENOTCONN;
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
|
|
|
vq = fsvq->vq;
|
|
|
|
ret = virtqueue_add_sgs(vq, sgs, out_sgs, in_sgs, req, GFP_ATOMIC);
|
|
|
|
if (ret < 0) {
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
goto out;
|
|
|
|
}
|
|
|
|
|
2019-10-15 20:46:24 +03:00
|
|
|
/* Request successfully sent. */
|
|
|
|
fpq = &fsvq->fud->pq;
|
|
|
|
spin_lock(&fpq->lock);
|
|
|
|
list_add_tail(&req->list, fpq->processing);
|
|
|
|
spin_unlock(&fpq->lock);
|
|
|
|
set_bit(FR_SENT, &req->flags);
|
|
|
|
/* matches barrier in request_wait_answer() */
|
|
|
|
smp_mb__after_atomic();
|
|
|
|
|
2019-10-15 20:46:26 +03:00
|
|
|
if (!in_flight)
|
|
|
|
inc_in_flight_req(fsvq);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
notify = virtqueue_kick_prepare(vq);
|
|
|
|
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
|
|
|
|
if (notify)
|
|
|
|
virtqueue_notify(vq);
|
|
|
|
|
|
|
|
out:
|
|
|
|
if (ret < 0 && req->argbuf) {
|
|
|
|
kfree(req->argbuf);
|
|
|
|
req->argbuf = NULL;
|
|
|
|
}
|
|
|
|
if (sgs != stack_sgs) {
|
|
|
|
kfree(sgs);
|
|
|
|
kfree(sg);
|
|
|
|
}
|
|
|
|
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
static void virtio_fs_wake_pending_and_unlock(struct fuse_iqueue *fiq)
|
|
|
|
__releases(fiq->lock)
|
|
|
|
{
|
|
|
|
unsigned int queue_id = VQ_REQUEST; /* TODO multiqueue */
|
|
|
|
struct virtio_fs *fs;
|
|
|
|
struct fuse_req *req;
|
2019-10-15 20:46:22 +03:00
|
|
|
struct virtio_fs_vq *fsvq;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
int ret;
|
|
|
|
|
|
|
|
WARN_ON(list_empty(&fiq->pending));
|
|
|
|
req = list_last_entry(&fiq->pending, struct fuse_req, list);
|
|
|
|
clear_bit(FR_PENDING, &req->flags);
|
|
|
|
list_del_init(&req->list);
|
|
|
|
WARN_ON(!list_empty(&fiq->pending));
|
|
|
|
spin_unlock(&fiq->lock);
|
|
|
|
|
|
|
|
fs = fiq->priv;
|
|
|
|
|
|
|
|
pr_debug("%s: opcode %u unique %#llx nodeid %#llx in.len %u out.len %u\n",
|
|
|
|
__func__, req->in.h.opcode, req->in.h.unique,
|
|
|
|
req->in.h.nodeid, req->in.h.len,
|
|
|
|
fuse_len_args(req->args->out_numargs, req->args->out_args));
|
|
|
|
|
2019-10-15 20:46:22 +03:00
|
|
|
fsvq = &fs->vqs[queue_id];
|
2019-10-15 20:46:26 +03:00
|
|
|
ret = virtio_fs_enqueue_req(fsvq, req, false);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
if (ret < 0) {
|
|
|
|
if (ret == -ENOMEM || ret == -ENOSPC) {
|
2019-10-15 20:46:26 +03:00
|
|
|
/*
|
|
|
|
* Virtqueue full. Retry submission from worker
|
|
|
|
* context as we might be holding fc->bg_lock.
|
|
|
|
*/
|
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
list_add_tail(&req->list, &fsvq->queued_reqs);
|
|
|
|
inc_in_flight_req(fsvq);
|
|
|
|
schedule_delayed_work(&fsvq->dispatch_work,
|
|
|
|
msecs_to_jiffies(1));
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
return;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
}
|
|
|
|
req->out.h.error = ret;
|
|
|
|
pr_err("virtio-fs: virtio_fs_enqueue_req() failed %d\n", ret);
|
2019-10-15 20:46:22 +03:00
|
|
|
|
|
|
|
/* Can't end request in submission context. Use a worker */
|
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
list_add_tail(&req->list, &fsvq->end_reqs);
|
|
|
|
schedule_delayed_work(&fsvq->dispatch_work, 0);
|
|
|
|
spin_unlock(&fsvq->lock);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
return;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2019-11-11 15:23:59 +03:00
|
|
|
static const struct fuse_iqueue_ops virtio_fs_fiq_ops = {
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
.wake_forget_and_unlock = virtio_fs_wake_forget_and_unlock,
|
|
|
|
.wake_interrupt_and_unlock = virtio_fs_wake_interrupt_and_unlock,
|
|
|
|
.wake_pending_and_unlock = virtio_fs_wake_pending_and_unlock,
|
|
|
|
.release = virtio_fs_fiq_release,
|
|
|
|
};
|
|
|
|
|
2020-08-20 01:19:47 +03:00
|
|
|
static inline void virtio_fs_ctx_set_defaults(struct fuse_fs_context *ctx)
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
{
|
2020-08-20 01:19:47 +03:00
|
|
|
ctx->rootmode = S_IFDIR;
|
|
|
|
ctx->default_permissions = 1;
|
|
|
|
ctx->allow_other = 1;
|
|
|
|
ctx->max_read = UINT_MAX;
|
|
|
|
ctx->blksize = 512;
|
|
|
|
ctx->destroy = true;
|
|
|
|
ctx->no_control = true;
|
|
|
|
ctx->no_force_umount = true;
|
|
|
|
}
|
|
|
|
|
|
|
|
static int virtio_fs_fill_super(struct super_block *sb, struct fs_context *fsc)
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
{
|
2020-05-06 18:44:12 +03:00
|
|
|
struct fuse_mount *fm = get_fuse_mount_super(sb);
|
|
|
|
struct fuse_conn *fc = fm->fc;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
struct virtio_fs *fs = fc->iq.priv;
|
2020-08-20 01:19:47 +03:00
|
|
|
struct fuse_fs_context *ctx = fsc->fs_private;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
unsigned int i;
|
|
|
|
int err;
|
|
|
|
|
2020-08-20 01:19:47 +03:00
|
|
|
virtio_fs_ctx_set_defaults(ctx);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
mutex_lock(&virtio_fs_mutex);
|
|
|
|
|
|
|
|
/* After holding mutex, make sure virtiofs device is still there.
|
|
|
|
* Though we are holding a reference to it, drive ->remove might
|
|
|
|
* still have cleaned up virtual queues. In that case bail out.
|
|
|
|
*/
|
|
|
|
err = -EINVAL;
|
|
|
|
if (list_empty(&fs->list)) {
|
|
|
|
pr_info("virtio-fs: tag <%s> not found\n", fs->tag);
|
|
|
|
goto err;
|
|
|
|
}
|
|
|
|
|
|
|
|
err = -ENOMEM;
|
|
|
|
/* Allocate fuse_dev for hiprio and notification queues */
|
2020-05-04 21:33:15 +03:00
|
|
|
for (i = 0; i < fs->nvqs; i++) {
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
struct virtio_fs_vq *fsvq = &fs->vqs[i];
|
|
|
|
|
|
|
|
fsvq->fud = fuse_dev_alloc();
|
|
|
|
if (!fsvq->fud)
|
|
|
|
goto err_free_fuse_devs;
|
|
|
|
}
|
|
|
|
|
2020-05-04 21:33:15 +03:00
|
|
|
/* virtiofs allocates and installs its own fuse devices */
|
2020-08-20 01:19:47 +03:00
|
|
|
ctx->fudptr = NULL;
|
|
|
|
if (ctx->dax)
|
|
|
|
ctx->dax_dev = fs->dax_dev;
|
|
|
|
err = fuse_fill_super_common(sb, ctx);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
if (err < 0)
|
|
|
|
goto err_free_fuse_devs;
|
|
|
|
|
|
|
|
for (i = 0; i < fs->nvqs; i++) {
|
|
|
|
struct virtio_fs_vq *fsvq = &fs->vqs[i];
|
|
|
|
|
|
|
|
fuse_dev_install(fsvq->fud, fc);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Previous unmount will stop all queues. Start these again */
|
|
|
|
virtio_fs_start_all_queues(fs);
|
2020-05-06 18:44:12 +03:00
|
|
|
fuse_send_init(fm);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
mutex_unlock(&virtio_fs_mutex);
|
|
|
|
return 0;
|
|
|
|
|
|
|
|
err_free_fuse_devs:
|
|
|
|
virtio_fs_free_devs(fs);
|
|
|
|
err:
|
|
|
|
mutex_unlock(&virtio_fs_mutex);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
2020-05-06 18:44:12 +03:00
|
|
|
static void virtio_fs_conn_destroy(struct fuse_mount *fm)
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
{
|
2020-05-06 18:44:12 +03:00
|
|
|
struct fuse_conn *fc = fm->fc;
|
|
|
|
struct virtio_fs *vfs = fc->iq.priv;
|
|
|
|
struct virtio_fs_vq *fsvq = &vfs->vqs[VQ_HIPRIO];
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
|
2020-05-06 18:44:12 +03:00
|
|
|
/* Stop dax worker. Soon evict_inodes() will be called which
|
|
|
|
* will free all memory ranges belonging to all inodes.
|
2020-08-20 01:19:56 +03:00
|
|
|
*/
|
|
|
|
if (IS_ENABLED(CONFIG_FUSE_DAX))
|
|
|
|
fuse_dax_cancel_work(fc);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
|
|
|
|
/* Stop forget queue. Soon destroy will be sent */
|
|
|
|
spin_lock(&fsvq->lock);
|
|
|
|
fsvq->connected = false;
|
|
|
|
spin_unlock(&fsvq->lock);
|
|
|
|
virtio_fs_drain_all_queues(vfs);
|
|
|
|
|
2020-05-06 18:44:12 +03:00
|
|
|
fuse_conn_destroy(fm);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
|
2020-05-06 18:44:12 +03:00
|
|
|
/* fuse_conn_destroy() must have sent destroy. Stop all queues
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
* and drain one more time and free fuse devices. Freeing fuse
|
|
|
|
* devices will drop their reference on fuse_conn and that in
|
|
|
|
* turn will drop its reference on virtio_fs object.
|
|
|
|
*/
|
|
|
|
virtio_fs_stop_all_queues(vfs);
|
|
|
|
virtio_fs_drain_all_queues(vfs);
|
|
|
|
virtio_fs_free_devs(vfs);
|
|
|
|
}
|
|
|
|
|
2020-05-06 18:44:12 +03:00
|
|
|
static void virtio_kill_sb(struct super_block *sb)
|
|
|
|
{
|
|
|
|
struct fuse_mount *fm = get_fuse_mount_super(sb);
|
|
|
|
bool last;
|
|
|
|
|
|
|
|
/* If mount failed, we can still be called without any fc */
|
|
|
|
if (fm) {
|
|
|
|
last = fuse_mount_remove(fm);
|
|
|
|
if (last)
|
|
|
|
virtio_fs_conn_destroy(fm);
|
|
|
|
}
|
|
|
|
kill_anon_super(sb);
|
|
|
|
}
|
|
|
|
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
static int virtio_fs_test_super(struct super_block *sb,
|
|
|
|
struct fs_context *fsc)
|
|
|
|
{
|
2020-05-06 18:44:12 +03:00
|
|
|
struct fuse_mount *fsc_fm = fsc->s_fs_info;
|
|
|
|
struct fuse_mount *sb_fm = get_fuse_mount_super(sb);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
|
2020-05-06 18:44:12 +03:00
|
|
|
return fsc_fm->fc->iq.priv == sb_fm->fc->iq.priv;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static int virtio_fs_get_tree(struct fs_context *fsc)
|
|
|
|
{
|
|
|
|
struct virtio_fs *fs;
|
|
|
|
struct super_block *sb;
|
|
|
|
struct fuse_conn *fc;
|
2020-05-06 18:44:12 +03:00
|
|
|
struct fuse_mount *fm;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
int err;
|
|
|
|
|
|
|
|
/* This gets a reference on virtio_fs object. This ptr gets installed
|
|
|
|
* in fc->iq->priv. Once fuse_conn is going away, it calls ->put()
|
|
|
|
* to drop the reference to this object.
|
|
|
|
*/
|
|
|
|
fs = virtio_fs_find_instance(fsc->source);
|
|
|
|
if (!fs) {
|
|
|
|
pr_info("virtio-fs: tag <%s> not found\n", fsc->source);
|
|
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
|
2020-11-11 19:22:32 +03:00
|
|
|
err = -ENOMEM;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
fc = kzalloc(sizeof(struct fuse_conn), GFP_KERNEL);
|
2020-11-11 19:22:32 +03:00
|
|
|
if (!fc)
|
|
|
|
goto out_err;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
|
2020-05-06 18:44:12 +03:00
|
|
|
fm = kzalloc(sizeof(struct fuse_mount), GFP_KERNEL);
|
2020-11-11 19:22:32 +03:00
|
|
|
if (!fm)
|
|
|
|
goto out_err;
|
2020-05-06 18:44:12 +03:00
|
|
|
|
|
|
|
fuse_conn_init(fc, fm, get_user_ns(current_user_ns()),
|
|
|
|
&virtio_fs_fiq_ops, fs);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
fc->release = fuse_free_conn;
|
|
|
|
fc->delete_stale = true;
|
2020-04-21 15:47:15 +03:00
|
|
|
fc->auto_submounts = true;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
|
2020-05-06 18:44:12 +03:00
|
|
|
fsc->s_fs_info = fm;
|
2020-11-11 19:22:31 +03:00
|
|
|
sb = sget_fc(fsc, virtio_fs_test_super, set_anon_super_fc);
|
2020-11-11 19:22:32 +03:00
|
|
|
if (fsc->s_fs_info) {
|
|
|
|
fuse_conn_put(fc);
|
|
|
|
kfree(fm);
|
|
|
|
}
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
if (IS_ERR(sb))
|
|
|
|
return PTR_ERR(sb);
|
|
|
|
|
|
|
|
if (!sb->s_root) {
|
2020-08-20 01:19:47 +03:00
|
|
|
err = virtio_fs_fill_super(sb, fsc);
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
if (err) {
|
2020-11-11 19:22:32 +03:00
|
|
|
fuse_conn_put(fc);
|
|
|
|
kfree(fm);
|
2020-11-11 19:22:31 +03:00
|
|
|
sb->s_fs_info = NULL;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
deactivate_locked_super(sb);
|
|
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
|
|
sb->s_flags |= SB_ACTIVE;
|
|
|
|
}
|
|
|
|
|
|
|
|
WARN_ON(fsc->root);
|
|
|
|
fsc->root = dget(sb->s_root);
|
|
|
|
return 0;
|
2020-11-11 19:22:32 +03:00
|
|
|
|
|
|
|
out_err:
|
|
|
|
kfree(fc);
|
|
|
|
mutex_lock(&virtio_fs_mutex);
|
|
|
|
virtio_fs_put(fs);
|
|
|
|
mutex_unlock(&virtio_fs_mutex);
|
|
|
|
return err;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
}
|
|
|
|
|
|
|
|
static const struct fs_context_operations virtio_fs_context_ops = {
|
2020-08-20 01:19:47 +03:00
|
|
|
.free = virtio_fs_free_fc,
|
|
|
|
.parse_param = virtio_fs_parse_param,
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
.get_tree = virtio_fs_get_tree,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int virtio_fs_init_fs_context(struct fs_context *fsc)
|
|
|
|
{
|
2020-08-20 01:19:47 +03:00
|
|
|
struct fuse_fs_context *ctx;
|
|
|
|
|
|
|
|
ctx = kzalloc(sizeof(struct fuse_fs_context), GFP_KERNEL);
|
|
|
|
if (!ctx)
|
|
|
|
return -ENOMEM;
|
|
|
|
fsc->fs_private = ctx;
|
virtio-fs: add virtiofs filesystem
Add a basic file system module for virtio-fs. This does not yet contain
shared data support between host and guest or metadata coherency speedups.
However it is already significantly faster than virtio-9p.
Design Overview
===============
With the goal of designing something with better performance and local file
system semantics, a bunch of ideas were proposed.
- Use fuse protocol (instead of 9p) for communication between guest and
host. Guest kernel will be fuse client and a fuse server will run on
host to serve the requests.
- For data access inside guest, mmap portion of file in QEMU address space
and guest accesses this memory using dax. That way guest page cache is
bypassed and there is only one copy of data (on host). This will also
enable mmap(MAP_SHARED) between guests.
- For metadata coherency, there is a shared memory region which contains
version number associated with metadata and any guest changing metadata
updates version number and other guests refresh metadata on next access.
This is yet to be implemented.
How virtio-fs differs from existing approaches
==============================================
The unique idea behind virtio-fs is to take advantage of the co-location of
the virtual machine and hypervisor to avoid communication (vmexits).
DAX allows file contents to be accessed without communication with the
hypervisor. The shared memory region for metadata avoids communication in
the common case where metadata is unchanged.
By replacing expensive communication with cheaper shared memory accesses,
we expect to achieve better performance than approaches based on network
file system protocols. In addition, this also makes it easier to achieve
local file system semantics (coherency).
These techniques are not applicable to network file system protocols since
the communications channel is bypassed by taking advantage of shared memory
on a local machine. This is why we decided to build virtio-fs rather than
focus on 9P or NFS.
Caching Modes
=============
Like virtio-9p, different caching modes are supported which determine the
coherency level as well. The “cache=FOO” and “writeback” options control
the level of coherence between the guest and host filesystems.
- cache=none
metadata, data and pathname lookup are not cached in guest. They are
always fetched from host and any changes are immediately pushed to host.
- cache=always
metadata, data and pathname lookup are cached in guest and never expire.
- cache=auto
metadata and pathname lookup cache expires after a configured amount of
time (default is 1 second). Data is cached while the file is open
(close to open consistency).
- writeback/no_writeback
These options control the writeback strategy. If writeback is disabled,
then normal writes will immediately be synchronized with the host fs.
If writeback is enabled, then writes may be cached in the guest until
the file is closed or an fsync(2) performed. This option has no effect
on mmap-ed writes or writes going through the DAX mechanism.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
2018-06-12 11:41:17 +03:00
|
|
|
fsc->ops = &virtio_fs_context_ops;
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
|
|
|
|
static struct file_system_type virtio_fs_type = {
|
|
|
|
.owner = THIS_MODULE,
|
|
|
|
.name = "virtiofs",
|
|
|
|
.init_fs_context = virtio_fs_init_fs_context,
|
|
|
|
.kill_sb = virtio_kill_sb,
|
|
|
|
};
|
|
|
|
|
|
|
|
static int __init virtio_fs_init(void)
|
|
|
|
{
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
ret = register_virtio_driver(&virtio_fs_driver);
|
|
|
|
if (ret < 0)
|
|
|
|
return ret;
|
|
|
|
|
|
|
|
ret = register_filesystem(&virtio_fs_type);
|
|
|
|
if (ret < 0) {
|
|
|
|
unregister_virtio_driver(&virtio_fs_driver);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
module_init(virtio_fs_init);
|
|
|
|
|
|
|
|
static void __exit virtio_fs_exit(void)
|
|
|
|
{
|
|
|
|
unregister_filesystem(&virtio_fs_type);
|
|
|
|
unregister_virtio_driver(&virtio_fs_driver);
|
|
|
|
}
|
|
|
|
module_exit(virtio_fs_exit);
|
|
|
|
|
|
|
|
MODULE_AUTHOR("Stefan Hajnoczi <stefanha@redhat.com>");
|
|
|
|
MODULE_DESCRIPTION("Virtio Filesystem");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
|
|
MODULE_ALIAS_FS(KBUILD_MODNAME);
|
|
|
|
MODULE_DEVICE_TABLE(virtio, id_table);
|