microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность
WSL2-Linux-Kernel/drivers/vdpa/Kconfig

90 строки
2.4 KiB
Plaintext
Исходник Обычный вид История

vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 17:01:21 +03:00
# SPDX-License-Identifier: GPL-2.0-only
vdpa: make vhost, virtio depend on menu If user did not configure any vdpa drivers, neither vhost nor virtio vdpa are going to be useful. So there's no point in prompting for these and selecting vdpa core automatically. Simplify configuration by making virtio and vhost vdpa drivers depend on vdpa menu entry. Once done, we no longer need a separate menu entry, so also get rid of this. While at it, fix up the IFC entry: VDPA->vDPA for consistency with other places. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-04-12 11:36:55 +03:00
menuconfig VDPA
tristate "vDPA drivers"
vdpa: Define vdpa mgmt device, ops and a netlink interface To add one or more VDPA devices, define a management device which allows adding or removing vdpa device. A management device defines set of callbacks to manage vdpa devices. To begin with, it defines add and remove callbacks through which a user defined vdpa device can be added or removed. A unique management device is identified by its unique handle identified by management device name and optionally the bus name. Hence, introduce routine through which driver can register a management device and its callback operations for adding and remove a vdpa device. Introduce vdpa netlink socket family so that user can query management device and its attributes. Example of show vdpa management device which allows creating vdpa device of networking class (device id = 0x1) of virtio specification 1.1 section 5.1.1. $ vdpa mgmtdev show vdpasim_net: supported_classes: net Example of showing vdpa management device in JSON format. $ vdpa mgmtdev show -jp { "show": { "vdpasim_net": { "supported_classes": [ "net" ] } } } Signed-off-by: Parav Pandit <parav@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210105103203.82508-4-parav@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Including a bugfix: vpda: correctly size vdpa_nl_policy We need to ensure last entry of vdpa_nl_policy[] is zero, otherwise out-of-bounds access is hurting us. Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Cc: Parav Pandit <parav@nvidia.com> Cc: Eli Cohen <elic@nvidia.com> Cc: Jason Wang <jasowang@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Link: https://lore.kernel.org/r/20210210134911.4119555-1-eric.dumazet@gmail.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-01-05 13:32:00 +03:00
depends on NET
vDPA: introduce vDPA bus vDPA device is a device that uses a datapath which complies with the virtio specifications with vendor specific control path. vDPA devices can be both physically located on the hardware or emulated by software. vDPA hardware devices are usually implemented through PCIE with the following types: - PF (Physical Function) - A single Physical Function - VF (Virtual Function) - Device that supports single root I/O virtualization (SR-IOV). Its Virtual Function (VF) represents a virtualized instance of the device that can be assigned to different partitions - ADI (Assignable Device Interface) and its equivalents - With technologies such as Intel Scalable IOV, a virtual device (VDEV) composed by host OS utilizing one or more ADIs. Or its equivalent like SF (Sub function) from Mellanox. >From a driver's perspective, depends on how and where the DMA translation is done, vDPA devices are split into two types: - Platform specific DMA translation - From the driver's perspective, the device can be used on a platform where device access to data in memory is limited and/or translated. An example is a PCIE vDPA whose DMA request was tagged via a bus (e.g PCIE) specific way. DMA translation and protection are done at PCIE bus IOMMU level. - Device specific DMA translation - The device implements DMA isolation and protection through its own logic. An example is a vDPA device which uses on-chip IOMMU. To hide the differences and complexity of the above types for a vDPA device/IOMMU options and in order to present a generic virtio device to the upper layer, a device agnostic framework is required. This patch introduces a software vDPA bus which abstracts the common attributes of vDPA device, vDPA bus driver and the communication method (vdpa_config_ops) between the vDPA device abstraction and the vDPA bus driver. This allows multiple types of drivers to be used for vDPA device like the virtio_vdpa and vhost_vdpa driver to operate on the bus and allow vDPA device could be used by either kernel virtio driver or userspace vhost drivers as: virtio drivers vhost drivers | | [virtio bus] [vhost uAPI] | | virtio device vhost device virtio_vdpa drv vhost_vdpa drv \ / [vDPA bus] | vDPA device hardware drv | [hardware bus] | vDPA hardware With the abstraction of vDPA bus and vDPA bus operations, the difference and complexity of the under layer hardware is hidden from upper layer. The vDPA bus drivers on top can use a unified vdpa_config_ops to control different types of vDPA device. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-6-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 17:01:21 +03:00
help
Enable this module to support vDPA device that uses a
datapath which complies with virtio specifications with
vendor specific control path.
vdpasim: vDPA device simulator This patch implements a software vDPA networking device. The datapath is implemented through vringh and workqueue. The device has an on-chip IOMMU which translates IOVA to PA. For kernel virtio drivers, vDPA simulator driver provides dma_ops. For vhost driers, set_map() methods of vdpa_config_ops is implemented to accept mappings from vhost. Currently, vDPA device simulator will loopback TX traffic to RX. So the main use case for the device is vDPA feature testing, prototyping and development. Note, there's no management API implemented, a vDPA device will be registered once the module is probed. We need to handle this in the future development. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-9-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 17:01:24 +03:00
vdpa: make vhost, virtio depend on menu If user did not configure any vdpa drivers, neither vhost nor virtio vdpa are going to be useful. So there's no point in prompting for these and selecting vdpa core automatically. Simplify configuration by making virtio and vhost vdpa drivers depend on vdpa menu entry. Once done, we no longer need a separate menu entry, so also get rid of this. While at it, fix up the IFC entry: VDPA->vDPA for consistency with other places. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-04-12 11:36:55 +03:00
if VDPA
vdpasim: vDPA device simulator This patch implements a software vDPA networking device. The datapath is implemented through vringh and workqueue. The device has an on-chip IOMMU which translates IOVA to PA. For kernel virtio drivers, vDPA simulator driver provides dma_ops. For vhost driers, set_map() methods of vdpa_config_ops is implemented to accept mappings from vhost. Currently, vDPA device simulator will loopback TX traffic to RX. So the main use case for the device is vDPA feature testing, prototyping and development. Note, there's no management API implemented, a vDPA device will be registered once the module is probed. We need to handle this in the future development. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-9-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 17:01:24 +03:00
config VDPA_SIM
vdpa: split vdpasim to core and net modules Introduce new vdpa_sim_net and vdpa_sim (core) drivers. This is a preparation for adding a vdpa simulator module for block devices. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> [sgarzare: various cleanups/fixes] Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201215144256.155342-19-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-15 17:42:56 +03:00
tristate "vDPA device simulator core"
vhost: revert "vhost: disable for OABI" This reverts commit d085eb8ce727 ("vhost: disable for OABI") With commit "virtio: force spec specified alignment on types" in place, we force proper alignment for all structures, so there's no longer a reason to blacklist OABI. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-04-23 15:36:57 +03:00
depends on RUNTIME_TESTING_MENU && HAS_DMA
dma-mapping: make support for dma ops optional Avoid the overhead of the dma ops support for tiny builds that only use the direct mapping. Signed-off-by: Christoph Hellwig <hch@lst.de> Tested-by: Alexey Kardashevskiy <aik@ozlabs.ru> Reviewed-by: Alexey Kardashevskiy <aik@ozlabs.ru>
2020-07-08 10:30:00 +03:00
select DMA_OPS
vdpasim: vDPA device simulator This patch implements a software vDPA networking device. The datapath is implemented through vringh and workqueue. The device has an on-chip IOMMU which translates IOVA to PA. For kernel virtio drivers, vDPA simulator driver provides dma_ops. For vhost driers, set_map() methods of vdpa_config_ops is implemented to accept mappings from vhost. Currently, vDPA device simulator will loopback TX traffic to RX. So the main use case for the device is vDPA feature testing, prototyping and development. Note, there's no management API implemented, a vDPA device will be registered once the module is probed. We need to handle this in the future development. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-9-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 17:01:24 +03:00
select VHOST_RING
vdpa_sim: use iova module to allocate IOVA addresses The identical mapping used until now created issues when mapping different virtual pages with the same physical address. To solve this issue, we can use the iova module, to handle the IOVA allocation. For simplicity we use an IOVA allocator with byte granularity. We add two new functions, vdpasim_map_range() and vdpasim_unmap_range(), to handle the IOVA allocation and the registration into the IOMMU/IOTLB. These functions are used by dma_map_ops callbacks. Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210315163450.254396-2-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-15 19:34:37 +03:00
select IOMMU_IOVA
vdpa: split vdpasim to core and net modules Introduce new vdpa_sim_net and vdpa_sim (core) drivers. This is a preparation for adding a vdpa simulator module for block devices. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> [sgarzare: various cleanups/fixes] Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201215144256.155342-19-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-15 17:42:56 +03:00
help
Enable this module to support vDPA device simulators. These devices
are used for testing, prototyping and development of vDPA.
config VDPA_SIM_NET
tristate "vDPA simulator for networking device"
depends on VDPA_SIM
vdpasim: fix "mac_pton" undefined error ERROR: modpost: "mac_pton" [drivers/vdpa/vdpa_sim/vdpa_sim.ko] undefined! mac_pton() is defined in lib/net_utils.c and is not built if NET is not set. Select GENERIC_NET_UTILS as vdpasim doesn't depend on NET. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Laurent Vivier <lvivier@redhat.com> Link: https://lore.kernel.org/r/20201113155706.599434-1-lvivier@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
2020-11-13 18:57:06 +03:00
select GENERIC_NET_UTILS
vdpasim: vDPA device simulator This patch implements a software vDPA networking device. The datapath is implemented through vringh and workqueue. The device has an on-chip IOMMU which translates IOVA to PA. For kernel virtio drivers, vDPA simulator driver provides dma_ops. For vhost driers, set_map() methods of vdpa_config_ops is implemented to accept mappings from vhost. Currently, vDPA device simulator will loopback TX traffic to RX. So the main use case for the device is vDPA feature testing, prototyping and development. Note, there's no management API implemented, a vDPA device will be registered once the module is probed. We need to handle this in the future development. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-9-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 17:01:24 +03:00
help
vdpa: split vdpasim to core and net modules Introduce new vdpa_sim_net and vdpa_sim (core) drivers. This is a preparation for adding a vdpa simulator module for block devices. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> [sgarzare: various cleanups/fixes] Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20201215144256.155342-19-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-12-15 17:42:56 +03:00
vDPA networking device simulator which loops TX traffic back to RX.
vdpasim: vDPA device simulator This patch implements a software vDPA networking device. The datapath is implemented through vringh and workqueue. The device has an on-chip IOMMU which translates IOVA to PA. For kernel virtio drivers, vDPA simulator driver provides dma_ops. For vhost driers, set_map() methods of vdpa_config_ops is implemented to accept mappings from vhost. Currently, vDPA device simulator will loopback TX traffic to RX. So the main use case for the device is vDPA feature testing, prototyping and development. Note, there's no management API implemented, a vDPA device will be registered once the module is probed. We need to handle this in the future development. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-9-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 17:01:24 +03:00
vdpa: add vdpa simulator for block device This will allow running vDPA for virtio block protocol. It's a preliminary implementation with a simple request handling: for each request, only the status (last byte) is set. It's always set to VIRTIO_BLK_S_OK. Also input validation is missing and will be added in the next commits. Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com> [sgarzare: various cleanups/fixes] Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Link: https://lore.kernel.org/r/20210315163450.254396-12-sgarzare@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-03-15 19:34:47 +03:00
config VDPA_SIM_BLOCK
tristate "vDPA simulator for block device"
depends on VDPA_SIM
help
vDPA block device simulator which terminates IO request in a
memory buffer.
vduse: Introduce VDUSE - vDPA Device in Userspace This VDUSE driver enables implementing software-emulated vDPA devices in userspace. The vDPA device is created by ioctl(VDUSE_CREATE_DEV) on /dev/vduse/control. Then a char device interface (/dev/vduse/$NAME) is exported to userspace for device emulation. In order to make the device emulation more secure, the device's control path is handled in kernel. A message mechnism is introduced to forward some dataplane related control messages to userspace. And in the data path, the DMA buffer will be mapped into userspace address space through different ways depending on the vDPA bus to which the vDPA device is attached. In virtio-vdpa case, the MMU-based software IOTLB is used to achieve that. And in vhost-vdpa case, the DMA buffer is reside in a userspace memory region which can be shared to the VDUSE userspace processs via transferring the shmfd. For more details on VDUSE design and usage, please see the follow-on Documentation commit. NB(mst): when merging this with b542e383d8c0 ("eventfd: Make signal recursion protection a task bit") replace eventfd_signal_count with eventfd_signal_allowed, and drop the previous ("eventfd: Export eventfd_wake_count to modules"). Signed-off-by: Xie Yongji <xieyongji@bytedance.com> Acked-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210831103634.33-13-xieyongji@bytedance.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-08-31 13:36:33 +03:00
config VDPA_USER
tristate "VDUSE (vDPA Device in Userspace) support"
depends on EVENTFD && MMU && HAS_DMA
select DMA_OPS
select VHOST_IOTLB
select IOMMU_IOVA
help
With VDUSE it is possible to emulate a vDPA Device
in a userspace program.
virtio: Intel IFC VF driver for VDPA This commit introduced two layers to drive IFC VF: (1) ifcvf_base layer, which handles IFC VF NIC hardware operations and configurations. (2) ifcvf_main layer, which complies to VDPA bus framework, implemented device operations for VDPA bus, handles device probe, bus attaching, vring operations, etc. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Bie Tiwei <tiwei.bie@intel.com> Signed-off-by: Wang Xiao <xiao.w.wang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-10-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 17:01:25 +03:00
config IFCVF
vdpa: make vhost, virtio depend on menu If user did not configure any vdpa drivers, neither vhost nor virtio vdpa are going to be useful. So there's no point in prompting for these and selecting vdpa core automatically. Simplify configuration by making virtio and vhost vdpa drivers depend on vdpa menu entry. Once done, we no longer need a separate menu entry, so also get rid of this. While at it, fix up the IFC entry: VDPA->vDPA for consistency with other places. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-04-12 11:36:55 +03:00
tristate "Intel IFC VF vDPA driver"
virtio: Intel IFC VF driver for VDPA This commit introduced two layers to drive IFC VF: (1) ifcvf_base layer, which handles IFC VF NIC hardware operations and configurations. (2) ifcvf_main layer, which complies to VDPA bus framework, implemented device operations for VDPA bus, handles device probe, bus attaching, vring operations, etc. Signed-off-by: Zhu Lingshan <lingshan.zhu@intel.com> Signed-off-by: Bie Tiwei <tiwei.bie@intel.com> Signed-off-by: Wang Xiao <xiao.w.wang@intel.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20200326140125.19794-10-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-03-26 17:01:25 +03:00
depends on PCI_MSI
help
This kernel module can drive Intel IFC VF NIC to offload
virtio dataplane traffic to hardware.
To compile this driver as a module, choose M here: the module will
be called ifcvf.
vdpa/mlx5: Add support library for mlx5 VDPA implementation Following patches introduce VDPA network driver for Mellanox Connectx6 devices. This patch provides functionality that will be used by those patches. Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Link: https://lore.kernel.org/r/20200804162048.22587-11-eli@mellanox.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-04 19:20:46 +03:00
config MLX5_VDPA
vdpa/mlx5: Fix dependency on MLX5_CORE Remove propmt for selecting MLX5_VDPA by the user and modify MLX5_VDPA_NET to select MLX5_VDPA. Also modify MLX5_VDPA_NET to depend on mlx5_core. This fixes an issue where configuration sets 'y' for MLX5_VDPA_NET while MLX5_CORE is compiled as a module causing link errors. Reported-by: kernel test robot <lkp@intel.com> Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 device")s Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20201007064011.GA50074@mtl-vdi-166.wap.labs.mlnx Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-07 09:40:11 +03:00
bool
vdpa: mlx5: fix vdpa/vhost dependencies drivers/vdpa/mlx5/ uses vhost_iotlb*() interfaces, so select VHOST_IOTLB to make them be built. However, if VHOST_IOTLB is the only VHOST symbol that is set/enabled, the object file still won't be built because drivers/Makefile won't descend into drivers/vhost/ to build it, so make drivers/Makefile build the needed binary whenever VHOST_IOTLB is set, like it does for VHOST_RING. Fixes these build errors: ERROR: modpost: "vhost_iotlb_itree_next" [drivers/vdpa/mlx5/mlx5_vdpa.ko] undefined! ERROR: modpost: "vhost_iotlb_itree_first" [drivers/vdpa/mlx5/mlx5_vdpa.ko] undefined! Fixes: 29064bfdabd5 ("vdpa/mlx5: Add support library for mlx5 VDPA implementation") Fixes: aff90770e54c ("vdpa/mlx5: Fix dependency on MLX5_CORE") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Eli Cohen <eli@mellanox.com> Cc: Parav Pandit <parav@mellanox.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Jason Wang <jasowang@redhat.com> Cc: virtualization@lists.linux-foundation.org Cc: Saeed Mahameed <saeedm@nvidia.com> Cc: Leon Romanovsky <leonro@nvidia.com> Cc: netdev@vger.kernel.org Link: https://lore.kernel.org/r/20201128213905.27409-1-rdunlap@infradead.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-11-29 00:39:05 +03:00
select VHOST_IOTLB
vdpa/mlx5: Add support library for mlx5 VDPA implementation Following patches introduce VDPA network driver for Mellanox Connectx6 devices. This patch provides functionality that will be used by those patches. Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Link: https://lore.kernel.org/r/20200804162048.22587-11-eli@mellanox.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-08-04 19:20:46 +03:00
help
Support library for Mellanox VDPA drivers. Provides code that is
common for all types of VDPA drivers. The following drivers are planned:
net, block.
vdpa/mlx5: Add VDPA driver for supported mlx5 devices Add a front end VDPA driver that registers in the VDPA bus and provides networking to a guest. The VDPA driver creates the necessary resources on the VF it is driving such that data path will be offloaded. Notifications are being communicated through the driver. Currently, only VFs are supported. In subsequent patches we will have devlink support to control which VF is used for VDPA and which function is used for regular networking. Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Link: https://lore.kernel.org/r/20200804162048.22587-13-eli@mellanox.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-08-04 19:20:48 +03:00
config MLX5_VDPA_NET
tristate "vDPA driver for ConnectX devices"
vdpa/mlx5: Fix dependency on MLX5_CORE Remove propmt for selecting MLX5_VDPA by the user and modify MLX5_VDPA_NET to select MLX5_VDPA. Also modify MLX5_VDPA_NET to depend on mlx5_core. This fixes an issue where configuration sets 'y' for MLX5_VDPA_NET while MLX5_CORE is compiled as a module causing link errors. Reported-by: kernel test robot <lkp@intel.com> Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 device")s Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20201007064011.GA50074@mtl-vdi-166.wap.labs.mlnx Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-07 09:40:11 +03:00
select MLX5_VDPA
vdpa/mlx5: Add support for control VQ and MAC setting Add support to handle control virtqueue configurations per virtio specification. The control virtqueue is implemented in software and no hardware offloading is involved. Control VQ configuration need task context, therefore all configurations are handled in a workqueue created for the purpose. Modifications are made to the memory registration code to allow for saving a copy of itolb to be used by the control VQ to access the vring. The max number of data virtqueus supported by the driver has been updated to 2 since multiqueue is not supported at this stage and we need to ensure consistency of VQ indices mapping to either data or control VQ. Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20210823052123.14909-6-elic@nvidia.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-08-23 08:21:22 +03:00
select VHOST_RING
vdpa/mlx5: Fix dependency on MLX5_CORE Remove propmt for selecting MLX5_VDPA by the user and modify MLX5_VDPA_NET to select MLX5_VDPA. Also modify MLX5_VDPA_NET to depend on mlx5_core. This fixes an issue where configuration sets 'y' for MLX5_VDPA_NET while MLX5_CORE is compiled as a module causing link errors. Reported-by: kernel test robot <lkp@intel.com> Fixes: 1a86b377aa21 ("vdpa/mlx5: Add VDPA driver for supported mlx5 device")s Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20201007064011.GA50074@mtl-vdi-166.wap.labs.mlnx Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2020-10-07 09:40:11 +03:00
depends on MLX5_CORE
vdpa/mlx5: Add VDPA driver for supported mlx5 devices Add a front end VDPA driver that registers in the VDPA bus and provides networking to a guest. The VDPA driver creates the necessary resources on the VF it is driving such that data path will be offloaded. Notifications are being communicated through the driver. Currently, only VFs are supported. In subsequent patches we will have devlink support to control which VF is used for VDPA and which function is used for regular networking. Reviewed-by: Parav Pandit <parav@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Link: https://lore.kernel.org/r/20200804162048.22587-13-eli@mellanox.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-08-04 19:20:48 +03:00
help
VDPA network driver for ConnectX6 and newer. Provides offloading
of virtio net datapath such that descriptors put on the ring will
be executed by the hardware. It also supports a variety of stateless
offloads depending on the actual device used and firmware version.
vdpa: introduce virtio pci driver This patch introduce a vDPA driver for virtio-pci device. It bridges the virtio-pci control command to the vDPA bus. This will be used for features prototyping and testing. Note that get/restore virtqueue state is not supported which needs extension on the virtio specification. Signed-off-by: Jason Wang <jasowang@redhat.com> Link: https://lore.kernel.org/r/20210223061905.422659-4-jasowang@redhat.com Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-02-23 09:19:05 +03:00
config VP_VDPA
tristate "Virtio PCI bridge vDPA driver"
select VIRTIO_PCI_LIB
depends on PCI_MSI
help
This kernel module bridges virtio PCI device to vDPA bus.
eni_vdpa: add vDPA driver for Alibaba ENI This patch adds a new vDPA driver for Alibaba ENI(Elastic Network Interface) which is build upon virtio 0.9.5 specification. And this driver is only enabled on X86 host currently. Link: https://lore.kernel.org/r/6a9f32c00609af16bbb2ea32e633b3beb1cbf84b.1635493219.git.wuzongyong@linux.alibaba.com Signed-off-by: Wu Zongyong <wuzongyong@linux.alibaba.com> Link: https://lore.kernel.org/r/20211026083214.3375383-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> # fix Kconfig typo Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2021-10-29 12:14:49 +03:00
config ALIBABA_ENI_VDPA
tristate "vDPA driver for Alibaba ENI"
select VIRTIO_PCI_LIB_LEGACY
depends on PCI_MSI && X86
help
VDPA driver for Alibaba ENI (Elastic Network Interface) which is built upon
virtio 0.9.5 specification.
vdpa: make vhost, virtio depend on menu If user did not configure any vdpa drivers, neither vhost nor virtio vdpa are going to be useful. So there's no point in prompting for these and selecting vdpa core automatically. Simplify configuration by making virtio and vhost vdpa drivers depend on vdpa menu entry. Once done, we no longer need a separate menu entry, so also get rid of this. While at it, fix up the IFC entry: VDPA->vDPA for consistency with other places. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com>
2020-04-12 11:36:55 +03:00
endif # VDPA