WSL2-Linux-Kernel/drivers/gpu/drm/sti/sti_awg_utils.c

183 строки
4.0 KiB
C
Исходник Обычный вид История

/*
* Copyright (C) STMicroelectronics SA 2014
* Author: Vincent Abriou <vincent.abriou@st.com> for STMicroelectronics.
* License terms: GNU General Public License (GPL), version 2
*/
#include "sti_awg_utils.h"
#define AWG_OPCODE_OFFSET 10
enum opcode {
SET,
RPTSET,
RPLSET,
SKIP,
STOP,
REPEAT,
REPLAY,
JUMP,
HOLD,
};
static int awg_generate_instr(enum opcode opcode,
long int arg,
long int mux_sel,
long int data_en,
struct awg_code_generation_params *fwparams)
{
u32 instruction = 0;
u32 mux = (mux_sel << 8) & 0x1ff;
u32 data_enable = (data_en << 9) & 0x2ff;
long int arg_tmp = arg;
/* skip, repeat and replay arg should not exceed 1023.
* If user wants to exceed this value, the instruction should be
* duplicate and arg should be adjust for each duplicated instruction.
*/
while (arg_tmp > 0) {
arg = arg_tmp;
if (fwparams->instruction_offset >= AWG_MAX_INST) {
DRM_ERROR("too many number of instructions\n");
return -EINVAL;
}
switch (opcode) {
case SKIP:
/* leave 'arg' + 1 pixel elapsing without changing
* output bus */
arg--; /* pixel adjustment */
arg_tmp--;
if (arg < 0) {
/* SKIP instruction not needed */
return 0;
}
if (arg == 0) {
/* SKIP 0 not permitted but we want to skip 1
* pixel. So we transform SKIP into SET
* instruction */
opcode = SET;
break;
}
mux = 0;
data_enable = 0;
arg = (arg << 22) >> 22;
arg &= (0x3ff);
break;
case REPEAT:
case REPLAY:
if (arg == 0) {
/* REPEAT or REPLAY instruction not needed */
return 0;
}
mux = 0;
data_enable = 0;
arg = (arg << 22) >> 22;
arg &= (0x3ff);
break;
case JUMP:
mux = 0;
data_enable = 0;
arg |= 0x40; /* for jump instruction 7th bit is 1 */
arg = (arg << 22) >> 22;
arg &= 0x3ff;
break;
case STOP:
arg = 0;
break;
case SET:
case RPTSET:
case RPLSET:
case HOLD:
arg = (arg << 24) >> 24;
arg &= (0x0ff);
break;
default:
DRM_ERROR("instruction %d does not exist\n", opcode);
return -EINVAL;
}
arg_tmp = arg_tmp - arg;
arg = ((arg + mux) + data_enable);
instruction = ((opcode) << AWG_OPCODE_OFFSET) | arg;
fwparams->ram_code[fwparams->instruction_offset] =
instruction & (0x3fff);
fwparams->instruction_offset++;
}
return 0;
}
int sti_awg_generate_code_data_enable_mode(
struct awg_code_generation_params *fwparams,
struct awg_timing *timing)
{
long int val;
long int data_en;
int ret = 0;
if (timing->trailing_lines > 0) {
/* skip trailing lines */
val = timing->blanking_level;
data_en = 0;
ret |= awg_generate_instr(RPLSET, val, 0, data_en, fwparams);
val = timing->trailing_lines - 1;
data_en = 0;
ret |= awg_generate_instr(REPLAY, val, 0, data_en, fwparams);
}
if (timing->trailing_pixels > 0) {
/* skip trailing pixel */
val = timing->blanking_level;
data_en = 0;
ret |= awg_generate_instr(RPLSET, val, 0, data_en, fwparams);
val = timing->trailing_pixels - 1;
data_en = 0;
ret |= awg_generate_instr(SKIP, val, 0, data_en, fwparams);
}
/* set DE signal high */
val = timing->blanking_level;
data_en = 1;
ret |= awg_generate_instr((timing->trailing_pixels > 0) ? SET : RPLSET,
val, 0, data_en, fwparams);
if (timing->blanking_pixels > 0) {
/* skip the number of active pixel */
val = timing->active_pixels - 1;
data_en = 1;
ret |= awg_generate_instr(SKIP, val, 0, data_en, fwparams);
/* set DE signal low */
val = timing->blanking_level;
data_en = 0;
ret |= awg_generate_instr(SET, val, 0, data_en, fwparams);
}
/* replay the sequence as many active lines defined */
val = timing->active_lines - 1;
data_en = 0;
ret |= awg_generate_instr(REPLAY, val, 0, data_en, fwparams);
if (timing->blanking_lines > 0) {
/* skip blanking lines */
val = timing->blanking_level;
data_en = 0;
ret |= awg_generate_instr(RPLSET, val, 0, data_en, fwparams);
val = timing->blanking_lines - 1;
data_en = 0;
ret |= awg_generate_instr(REPLAY, val, 0, data_en, fwparams);
}
return ret;
}