WSL2-Linux-Kernel/drivers/pinctrl/vt8500/pinctrl-wmt.c

599 строки
15 KiB
C
Исходник Обычный вид История

// SPDX-License-Identifier: GPL-2.0-only
/*
* Pinctrl driver for the Wondermedia SoC's
*
* Copyright (c) 2013 Tony Prisk <linux@prisktech.co.nz>
*/
#include <linux/err.h>
#include <linux/gpio/driver.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pinctrl/machine.h>
#include <linux/pinctrl/pinconf.h>
#include <linux/pinctrl/pinconf-generic.h>
#include <linux/pinctrl/pinctrl.h>
#include <linux/pinctrl/pinmux.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include "pinctrl-wmt.h"
static inline void wmt_setbits(struct wmt_pinctrl_data *data, u32 reg,
u32 mask)
{
u32 val;
val = readl_relaxed(data->base + reg);
val |= mask;
writel_relaxed(val, data->base + reg);
}
static inline void wmt_clearbits(struct wmt_pinctrl_data *data, u32 reg,
u32 mask)
{
u32 val;
val = readl_relaxed(data->base + reg);
val &= ~mask;
writel_relaxed(val, data->base + reg);
}
enum wmt_func_sel {
WMT_FSEL_GPIO_IN = 0,
WMT_FSEL_GPIO_OUT = 1,
WMT_FSEL_ALT = 2,
WMT_FSEL_COUNT = 3,
};
static const char * const wmt_functions[WMT_FSEL_COUNT] = {
[WMT_FSEL_GPIO_IN] = "gpio_in",
[WMT_FSEL_GPIO_OUT] = "gpio_out",
[WMT_FSEL_ALT] = "alt",
};
static int wmt_pmx_get_functions_count(struct pinctrl_dev *pctldev)
{
return WMT_FSEL_COUNT;
}
static const char *wmt_pmx_get_function_name(struct pinctrl_dev *pctldev,
unsigned selector)
{
return wmt_functions[selector];
}
static int wmt_pmx_get_function_groups(struct pinctrl_dev *pctldev,
unsigned selector,
const char * const **groups,
unsigned * const num_groups)
{
struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
/* every pin does every function */
*groups = data->groups;
*num_groups = data->ngroups;
return 0;
}
static int wmt_set_pinmux(struct wmt_pinctrl_data *data, unsigned func,
unsigned pin)
{
u32 bank = WMT_BANK_FROM_PIN(pin);
u32 bit = WMT_BIT_FROM_PIN(pin);
u32 reg_en = data->banks[bank].reg_en;
u32 reg_dir = data->banks[bank].reg_dir;
if (reg_dir == NO_REG) {
dev_err(data->dev, "pin:%d no direction register defined\n",
pin);
return -EINVAL;
}
/*
* If reg_en == NO_REG, we assume it is a dedicated GPIO and cannot be
* disabled (as on VT8500) and that no alternate function is available.
*/
switch (func) {
case WMT_FSEL_GPIO_IN:
if (reg_en != NO_REG)
wmt_setbits(data, reg_en, BIT(bit));
wmt_clearbits(data, reg_dir, BIT(bit));
break;
case WMT_FSEL_GPIO_OUT:
if (reg_en != NO_REG)
wmt_setbits(data, reg_en, BIT(bit));
wmt_setbits(data, reg_dir, BIT(bit));
break;
case WMT_FSEL_ALT:
if (reg_en == NO_REG) {
dev_err(data->dev, "pin:%d no alt function available\n",
pin);
return -EINVAL;
}
wmt_clearbits(data, reg_en, BIT(bit));
}
return 0;
}
static int wmt_pmx_set_mux(struct pinctrl_dev *pctldev,
unsigned func_selector,
unsigned group_selector)
{
struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
u32 pinnum = data->pins[group_selector].number;
return wmt_set_pinmux(data, func_selector, pinnum);
}
static void wmt_pmx_gpio_disable_free(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned offset)
{
struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
/* disable by setting GPIO_IN */
wmt_set_pinmux(data, WMT_FSEL_GPIO_IN, offset);
}
static int wmt_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
struct pinctrl_gpio_range *range,
unsigned offset,
bool input)
{
struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
wmt_set_pinmux(data, (input ? WMT_FSEL_GPIO_IN : WMT_FSEL_GPIO_OUT),
offset);
return 0;
}
static const struct pinmux_ops wmt_pinmux_ops = {
.get_functions_count = wmt_pmx_get_functions_count,
.get_function_name = wmt_pmx_get_function_name,
.get_function_groups = wmt_pmx_get_function_groups,
.set_mux = wmt_pmx_set_mux,
.gpio_disable_free = wmt_pmx_gpio_disable_free,
.gpio_set_direction = wmt_pmx_gpio_set_direction,
};
static int wmt_get_groups_count(struct pinctrl_dev *pctldev)
{
struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
return data->ngroups;
}
static const char *wmt_get_group_name(struct pinctrl_dev *pctldev,
unsigned selector)
{
struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
return data->groups[selector];
}
static int wmt_get_group_pins(struct pinctrl_dev *pctldev,
unsigned selector,
const unsigned **pins,
unsigned *num_pins)
{
struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
*pins = &data->pins[selector].number;
*num_pins = 1;
return 0;
}
static int wmt_pctl_find_group_by_pin(struct wmt_pinctrl_data *data, u32 pin)
{
int i;
for (i = 0; i < data->npins; i++) {
if (data->pins[i].number == pin)
return i;
}
return -EINVAL;
}
static int wmt_pctl_dt_node_to_map_func(struct wmt_pinctrl_data *data,
struct device_node *np,
u32 pin, u32 fnum,
struct pinctrl_map **maps)
{
int group;
struct pinctrl_map *map = *maps;
if (fnum >= ARRAY_SIZE(wmt_functions)) {
dev_err(data->dev, "invalid wm,function %d\n", fnum);
return -EINVAL;
}
group = wmt_pctl_find_group_by_pin(data, pin);
if (group < 0) {
dev_err(data->dev, "unable to match pin %d to group\n", pin);
return group;
}
map->type = PIN_MAP_TYPE_MUX_GROUP;
map->data.mux.group = data->groups[group];
map->data.mux.function = wmt_functions[fnum];
(*maps)++;
return 0;
}
static int wmt_pctl_dt_node_to_map_pull(struct wmt_pinctrl_data *data,
struct device_node *np,
u32 pin, u32 pull,
struct pinctrl_map **maps)
{
int group;
unsigned long *configs;
struct pinctrl_map *map = *maps;
if (pull > 2) {
dev_err(data->dev, "invalid wm,pull %d\n", pull);
return -EINVAL;
}
group = wmt_pctl_find_group_by_pin(data, pin);
if (group < 0) {
dev_err(data->dev, "unable to match pin %d to group\n", pin);
return group;
}
configs = kzalloc(sizeof(*configs), GFP_KERNEL);
if (!configs)
return -ENOMEM;
switch (pull) {
case 0:
configs[0] = PIN_CONFIG_BIAS_DISABLE;
break;
case 1:
configs[0] = PIN_CONFIG_BIAS_PULL_DOWN;
break;
case 2:
configs[0] = PIN_CONFIG_BIAS_PULL_UP;
break;
default:
configs[0] = PIN_CONFIG_BIAS_DISABLE;
dev_err(data->dev, "invalid pull state %d - disabling\n", pull);
}
map->type = PIN_MAP_TYPE_CONFIGS_PIN;
map->data.configs.group_or_pin = data->groups[group];
map->data.configs.configs = configs;
map->data.configs.num_configs = 1;
(*maps)++;
return 0;
}
static void wmt_pctl_dt_free_map(struct pinctrl_dev *pctldev,
struct pinctrl_map *maps,
unsigned num_maps)
{
int i;
for (i = 0; i < num_maps; i++)
if (maps[i].type == PIN_MAP_TYPE_CONFIGS_PIN)
kfree(maps[i].data.configs.configs);
kfree(maps);
}
static int wmt_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
struct device_node *np,
struct pinctrl_map **map,
unsigned *num_maps)
{
struct pinctrl_map *maps, *cur_map;
struct property *pins, *funcs, *pulls;
u32 pin, func, pull;
int num_pins, num_funcs, num_pulls, maps_per_pin;
int i, err;
struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
pins = of_find_property(np, "wm,pins", NULL);
if (!pins) {
dev_err(data->dev, "missing wmt,pins property\n");
return -EINVAL;
}
funcs = of_find_property(np, "wm,function", NULL);
pulls = of_find_property(np, "wm,pull", NULL);
if (!funcs && !pulls) {
dev_err(data->dev, "neither wm,function nor wm,pull specified\n");
return -EINVAL;
}
/*
* The following lines calculate how many values are defined for each
* of the properties.
*/
num_pins = pins->length / sizeof(u32);
num_funcs = funcs ? (funcs->length / sizeof(u32)) : 0;
num_pulls = pulls ? (pulls->length / sizeof(u32)) : 0;
if (num_funcs > 1 && num_funcs != num_pins) {
dev_err(data->dev, "wm,function must have 1 or %d entries\n",
num_pins);
return -EINVAL;
}
if (num_pulls > 1 && num_pulls != num_pins) {
dev_err(data->dev, "wm,pull must have 1 or %d entries\n",
num_pins);
return -EINVAL;
}
maps_per_pin = 0;
if (num_funcs)
maps_per_pin++;
if (num_pulls)
maps_per_pin++;
treewide: kzalloc() -> kcalloc() The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13 00:03:40 +03:00
cur_map = maps = kcalloc(num_pins * maps_per_pin, sizeof(*maps),
GFP_KERNEL);
if (!maps)
return -ENOMEM;
for (i = 0; i < num_pins; i++) {
err = of_property_read_u32_index(np, "wm,pins", i, &pin);
if (err)
goto fail;
if (pin >= (data->nbanks * 32)) {
dev_err(data->dev, "invalid wm,pins value\n");
err = -EINVAL;
goto fail;
}
if (num_funcs) {
err = of_property_read_u32_index(np, "wm,function",
(num_funcs > 1 ? i : 0), &func);
if (err)
goto fail;
err = wmt_pctl_dt_node_to_map_func(data, np, pin, func,
&cur_map);
if (err)
goto fail;
}
if (num_pulls) {
err = of_property_read_u32_index(np, "wm,pull",
(num_pulls > 1 ? i : 0), &pull);
if (err)
goto fail;
err = wmt_pctl_dt_node_to_map_pull(data, np, pin, pull,
&cur_map);
if (err)
goto fail;
}
}
*map = maps;
*num_maps = num_pins * maps_per_pin;
return 0;
/*
* The fail path removes any maps that have been allocated. The fail path is
* only called from code after maps has been kzalloc'd. It is also safe to
* pass 'num_pins * maps_per_pin' as the map count even though we probably
* failed before all the mappings were read as all maps are allocated at once,
* and configs are only allocated for .type = PIN_MAP_TYPE_CONFIGS_PIN - there
* is no failpath where a config can be allocated without .type being set.
*/
fail:
wmt_pctl_dt_free_map(pctldev, maps, num_pins * maps_per_pin);
return err;
}
static const struct pinctrl_ops wmt_pctl_ops = {
.get_groups_count = wmt_get_groups_count,
.get_group_name = wmt_get_group_name,
.get_group_pins = wmt_get_group_pins,
.dt_node_to_map = wmt_pctl_dt_node_to_map,
.dt_free_map = wmt_pctl_dt_free_map,
};
static int wmt_pinconf_get(struct pinctrl_dev *pctldev, unsigned pin,
unsigned long *config)
{
return -ENOTSUPP;
}
static int wmt_pinconf_set(struct pinctrl_dev *pctldev, unsigned pin,
unsigned long *configs, unsigned num_configs)
{
struct wmt_pinctrl_data *data = pinctrl_dev_get_drvdata(pctldev);
enum pin_config_param param;
u32 arg;
u32 bank = WMT_BANK_FROM_PIN(pin);
u32 bit = WMT_BIT_FROM_PIN(pin);
u32 reg_pull_en = data->banks[bank].reg_pull_en;
u32 reg_pull_cfg = data->banks[bank].reg_pull_cfg;
int i;
if ((reg_pull_en == NO_REG) || (reg_pull_cfg == NO_REG)) {
dev_err(data->dev, "bias functions not supported on pin %d\n",
pin);
return -EINVAL;
}
for (i = 0; i < num_configs; i++) {
param = pinconf_to_config_param(configs[i]);
arg = pinconf_to_config_argument(configs[i]);
if ((param == PIN_CONFIG_BIAS_PULL_DOWN) ||
(param == PIN_CONFIG_BIAS_PULL_UP)) {
if (arg == 0)
param = PIN_CONFIG_BIAS_DISABLE;
}
switch (param) {
case PIN_CONFIG_BIAS_DISABLE:
wmt_clearbits(data, reg_pull_en, BIT(bit));
break;
case PIN_CONFIG_BIAS_PULL_DOWN:
wmt_clearbits(data, reg_pull_cfg, BIT(bit));
wmt_setbits(data, reg_pull_en, BIT(bit));
break;
case PIN_CONFIG_BIAS_PULL_UP:
wmt_setbits(data, reg_pull_cfg, BIT(bit));
wmt_setbits(data, reg_pull_en, BIT(bit));
break;
default:
dev_err(data->dev, "unknown pinconf param\n");
return -EINVAL;
}
} /* for each config */
return 0;
}
static const struct pinconf_ops wmt_pinconf_ops = {
.pin_config_get = wmt_pinconf_get,
.pin_config_set = wmt_pinconf_set,
};
static struct pinctrl_desc wmt_desc = {
.owner = THIS_MODULE,
.name = "pinctrl-wmt",
.pctlops = &wmt_pctl_ops,
.pmxops = &wmt_pinmux_ops,
.confops = &wmt_pinconf_ops,
};
static int wmt_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
{
struct wmt_pinctrl_data *data = gpiochip_get_data(chip);
u32 bank = WMT_BANK_FROM_PIN(offset);
u32 bit = WMT_BIT_FROM_PIN(offset);
u32 reg_dir = data->banks[bank].reg_dir;
u32 val;
val = readl_relaxed(data->base + reg_dir);
if (val & BIT(bit))
return GPIO_LINE_DIRECTION_OUT;
return GPIO_LINE_DIRECTION_IN;
}
static int wmt_gpio_get_value(struct gpio_chip *chip, unsigned offset)
{
struct wmt_pinctrl_data *data = gpiochip_get_data(chip);
u32 bank = WMT_BANK_FROM_PIN(offset);
u32 bit = WMT_BIT_FROM_PIN(offset);
u32 reg_data_in = data->banks[bank].reg_data_in;
if (reg_data_in == NO_REG) {
dev_err(data->dev, "no data in register defined\n");
return -EINVAL;
}
return !!(readl_relaxed(data->base + reg_data_in) & BIT(bit));
}
static void wmt_gpio_set_value(struct gpio_chip *chip, unsigned offset,
int val)
{
struct wmt_pinctrl_data *data = gpiochip_get_data(chip);
u32 bank = WMT_BANK_FROM_PIN(offset);
u32 bit = WMT_BIT_FROM_PIN(offset);
u32 reg_data_out = data->banks[bank].reg_data_out;
if (reg_data_out == NO_REG) {
dev_err(data->dev, "no data out register defined\n");
return;
}
if (val)
wmt_setbits(data, reg_data_out, BIT(bit));
else
wmt_clearbits(data, reg_data_out, BIT(bit));
}
static int wmt_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
{
return pinctrl_gpio_direction_input(chip->base + offset);
}
static int wmt_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
int value)
{
wmt_gpio_set_value(chip, offset, value);
return pinctrl_gpio_direction_output(chip->base + offset);
}
static const struct gpio_chip wmt_gpio_chip = {
.label = "gpio-wmt",
.owner = THIS_MODULE,
.request = gpiochip_generic_request,
.free = gpiochip_generic_free,
.get_direction = wmt_gpio_get_direction,
.direction_input = wmt_gpio_direction_input,
.direction_output = wmt_gpio_direction_output,
.get = wmt_gpio_get_value,
.set = wmt_gpio_set_value,
.can_sleep = false,
};
int wmt_pinctrl_probe(struct platform_device *pdev,
struct wmt_pinctrl_data *data)
{
int err;
data->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(data->base))
return PTR_ERR(data->base);
wmt_desc.pins = data->pins;
wmt_desc.npins = data->npins;
data->gpio_chip = wmt_gpio_chip;
gpio: change member .dev to .parent The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-04 11:56:26 +03:00
data->gpio_chip.parent = &pdev->dev;
data->gpio_chip.ngpio = data->nbanks * 32;
platform_set_drvdata(pdev, data);
data->dev = &pdev->dev;
data->pctl_dev = devm_pinctrl_register(&pdev->dev, &wmt_desc, data);
if (IS_ERR(data->pctl_dev)) {
dev_err(&pdev->dev, "Failed to register pinctrl\n");
return PTR_ERR(data->pctl_dev);
}
err = gpiochip_add_data(&data->gpio_chip, data);
if (err) {
dev_err(&pdev->dev, "could not add GPIO chip\n");
return err;
}
err = gpiochip_add_pin_range(&data->gpio_chip, dev_name(data->dev),
0, 0, data->nbanks * 32);
if (err)
goto fail_range;
dev_info(&pdev->dev, "Pin controller initialized\n");
return 0;
fail_range:
gpiochip_remove(&data->gpio_chip);
return err;
}